PUBLIC_REPOS/buildroot: Buildroot is a simple, efficient and easy-to-use tool to generate embedded Linux systems through cross-compilation. The documentation can be found in docs/manual. You can generate a text document with 'make manual-text' and read output/docs/manual/manual.text. Online documentation can be found at http://buildroot.org/docs.html

Kory Maincent b71d7eae59 board/octavo: Add FORCE_CHECK_HASHES config and custom hashes		пре 5 месеци
..
linux-dts	8f088e6841 configs/octavo_osd32mp1_red: update BSP components	пре 2 година
overlay	8f088e6841 configs/octavo_osd32mp1_red: update BSP components	пре 2 година
patches	b71d7eae59 board/octavo: Add FORCE_CHECK_HASHES config and custom hashes	пре 5 месеци
tfa-dts	8f088e6841 configs/octavo_osd32mp1_red: update BSP components	пре 2 година
genimage.cfg	8f088e6841 configs/octavo_osd32mp1_red: update BSP components	пре 2 година
readme.txt	672807b815 configs/octavo_osd32mp1_red: new defconfig	пре 3 година

		
				readme.txt
			
				OSD32MP1-RED

Intro
=====

This configuration supports the OSD32MP1-RED platform:

  https://octavosystems.com/octavo_products/osd32mp1-red/

How to build
============

 $ make octavo_osd32mp1_red_defconfig
 $ make

How to write the microSD card
=============================

Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.

Copy the bootable "sdcard.img" onto an microSD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

Boot the board
==============

 (1) Insert the microSD card in connector X5.

 (2) Plug an USB-SERIAL cable in the JP4 pin connector and run your serial
     communication program on /dev/ttySTM0.

 (3) Plug an USB-C cable in the J2 connector or use barrel power supply to
     power-up the board.

 (4) The system will start, with the console on UART.