PUBLIC_REPOS/buildroot: Buildroot is a simple, efficient and easy-to-use tool to generate embedded Linux systems through cross-compilation. The documentation can be found in docs/manual. You can generate a text document with 'make manual-text' and read output/docs/manual/manual.text. Online documentation can be found at http://buildroot.org/docs.html

Thomas Petazzoni 97fc9b2a7f board/*/genimage.cfg: use partition-table-type = "gpt"		%!s(int64=3) %!d(string=hai) anos
..
overlay	f20589cbc7 configs/stm32mp157c_odyssey: new defconfig	%!s(int64=3) %!d(string=hai) anos
patches	f20589cbc7 configs/stm32mp157c_odyssey: new defconfig	%!s(int64=3) %!d(string=hai) anos
genimage.cfg	97fc9b2a7f board/*/genimage.cfg: use partition-table-type = "gpt"	%!s(int64=3) %!d(string=hai) anos
linux.config	f20589cbc7 configs/stm32mp157c_odyssey: new defconfig	%!s(int64=3) %!d(string=hai) anos
readme.txt	f20589cbc7 configs/stm32mp157c_odyssey: new defconfig	%!s(int64=3) %!d(string=hai) anos

		
				readme.txt
			
				STM32MP157C-Odyssey

Intro
=====

This configuration supports the STM32MP157C-Odyssey platform:

  https://wiki.seeedstudio.com/ODYSSEY-STM32MP157C/

How to build
============

 $ make stm32mp157c_odyssey_defconfig
 $ make

How to write the microSD card
=============================

Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.

Copy the bootable "sdcard.img" onto an microSD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

Boot the board
==============

 (1) Insert the microSD card in connector J21.

 (2) Connect to the UART connector J24 (located next the the DC jack
     J24 and the battery connector J20) and run your serial communication
     program on /dev/ttyACM0.

 (3) Plug a USB-C cable in J6 or a center-positive 12V jack into J17
     to power-up the board.

 (4) The system will start, with the console on UART.