Thomas Petazzoni
97fc9b2a7f
board/*/genimage.cfg: use partition-table-type = "gpt"
|
3 лет назад | |
|---|---|---|
| .. | ||
| linux-dts | 3 лет назад | |
| overlay | 3 лет назад | |
| patches | 3 лет назад | |
| tfa-dts | 3 лет назад | |
| genimage.cfg | 3 лет назад | |
| readme.txt | 3 лет назад | |
readme.txt
OSD32MP1-BRK
Intro
=====
This configuration supports the OSD32MP1-BRK platform:
https://octavosystems.com/octavo_products/osd32mp1-brk/
How to build
============
$ make octavo_osd32mp1_brk_defconfig
$ make
How to write the microSD card
=============================
Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.
Copy the bootable "sdcard.img" onto an microSD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Boot the board
==============
(1) Insert the microSD card.
(2) Plug an USB-SERIAL cable on the RX, TX and GND pins
(3) Plug a micro-USB cable to power-up the board.
(4) The system will start, with the console on UART.
Intro
=====
This configuration supports the OSD32MP1-BRK platform:
https://octavosystems.com/octavo_products/osd32mp1-brk/
How to build
============
$ make octavo_osd32mp1_brk_defconfig
$ make
How to write the microSD card
=============================
Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.
Copy the bootable "sdcard.img" onto an microSD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Boot the board
==============
(1) Insert the microSD card.
(2) Plug an USB-SERIAL cable on the RX, TX and GND pins
(3) Plug a micro-USB cable to power-up the board.
(4) The system will start, with the console on UART.