Francois Perrad
2081781833
configs/olimex_imx233_olinuxino: add hashes for Linux & U-Boot
|
1 năm trước cách đây | |
|---|---|---|
| .. | ||
| patches | 1 năm trước cách đây | |
| linux-wifi.fragment | 8 năm trước cách đây | |
| readme.txt | 8 năm trước cách đây | |
readme.txt
This configuration is intended as a base image.
It includes kernel and firmware support for the common USB WiFi hardware.
Packages for WiFi support are up to the user, you'll probably want
one or more of: hostapd, iw, wireless_tools and/or wpa_supplicant.
It also pulls up the console on the serial port, not on TV output.
=== Output files after building ==============================================
output/images
+-- boot.vfat (VFAT kernel partition image generated by genimage)
+-- imx23-olinuxino.dtb (device tree blob)
+-- rootfs.ext2 (Root file system)
+-- sdcard.img (Complete SD card image generated by genimage)
+-- u-boot.sd (U-Boot image)
+-- uImage (Kernel binary)
=== Use of generated SD card image ===========================================
To determine the device associated to the SD card have a look in the
/proc/partitions file:
cat /proc/partitions
Then, run the following command as root:
*** WARNING! The command will destroy all the card content. Use with care! ***
sudo dd if=output/images/sdcard.img of=/dev/
It includes kernel and firmware support for the common USB WiFi hardware.
Packages for WiFi support are up to the user, you'll probably want
one or more of: hostapd, iw, wireless_tools and/or wpa_supplicant.
It also pulls up the console on the serial port, not on TV output.
=== Output files after building ==============================================
output/images
+-- boot.vfat (VFAT kernel partition image generated by genimage)
+-- imx23-olinuxino.dtb (device tree blob)
+-- rootfs.ext2 (Root file system)
+-- sdcard.img (Complete SD card image generated by genimage)
+-- u-boot.sd (U-Boot image)
+-- uImage (Kernel binary)
=== Use of generated SD card image ===========================================
To determine the device associated to the SD card have a look in the
/proc/partitions file:
cat /proc/partitions
Then, run the following command as root:
*** WARNING! The command will destroy all the card content. Use with care! ***
sudo dd if=output/images/sdcard.img of=/dev/