Patrik Olsson
506c9b8e0d
configs/friendlyarm_nanopi_r3s: bump TF-A, U-Boot and Linux versions
|
před 2 měsíci | |
|---|---|---|
| .. | ||
| patches | před 2 měsíci | |
| rootfs_overlay | před 5 měsíci | |
| extlinux.conf.in | před 5 měsíci | |
| genimage.cfg.in | před 5 měsíci | |
| kernel.config | před 5 měsíci | |
| post-build.sh | před 5 měsíci | |
| readme.txt | před 5 měsíci | |
readme.txt
FriendlyARM NanoPi R3S
=======================
https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R3S
How to build
============
$ make friendlyarm_nanopi_r3s_defconfig
$ make
Files created in output directory
=================================
output/images
├── bl31.elf
├── genimage.cfg
├── Image
├── rk3566_ddr_1056MHz_v1.18.bin
├── rockchip
│ └── rk3566-nanopi-r3s.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rtl_nic
│ ├── ...
│ ├── rtl8168h-2.fw
│ └── ...
├── sdcard.img
├── u-boot.bin
└── u-boot-rockchip.bin
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M conv=fsync
Insert the micro SDcard in your Nanopi R3S and power it up.
The console is on the serial line, 1500000 8N1.
=======================
https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R3S
How to build
============
$ make friendlyarm_nanopi_r3s_defconfig
$ make
Files created in output directory
=================================
output/images
├── bl31.elf
├── genimage.cfg
├── Image
├── rk3566_ddr_1056MHz_v1.18.bin
├── rockchip
│ └── rk3566-nanopi-r3s.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rtl_nic
│ ├── ...
│ ├── rtl8168h-2.fw
│ └── ...
├── sdcard.img
├── u-boot.bin
└── u-boot-rockchip.bin
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M conv=fsync
Insert the micro SDcard in your Nanopi R3S and power it up.
The console is on the serial line, 1500000 8N1.