123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357 |
- From ba6e23d2c9e3bcabda328467ba4eeca12f37e2ae Mon Sep 17 00:00:00 2001
- From: Arnd Bergmann <arnd@arndb.de>
- Date: Sat, 3 Dec 2022 11:54:25 +0100
- Subject: [PATCH] ata: ahci: fix enum constants for gcc-13
- commit f07788079f515ca4a681c5f595bdad19cfbd7b1d upstream.
- gcc-13 slightly changes the type of constant expressions that are defined
- in an enum, which triggers a compile time sanity check in libata:
- linux/drivers/ata/libahci.c: In function 'ahci_led_store':
- linux/include/linux/compiler_types.h:357:45: error: call to '__compiletime_assert_302' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
- 357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
- The new behavior is that sizeof() returns the same value for the
- constant as it does for the enum type, which is generally more sensible
- and consistent.
- The problem in libata is that it contains a single enum definition for
- lots of unrelated constants, some of which are large positive (unsigned)
- integers like 0xffffffff, while others like (1<<31) are interpreted as
- negative integers, and this forces the enum type to become 64 bit wide
- even though most constants would still fit into a signed 32-bit 'int'.
- Fix this by changing the entire enum definition to use BIT(x) in place
- of (1<<x), which results in all values being seen as 'unsigned' and
- fitting into an unsigned 32-bit type.
- Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107917
- Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405
- Reported-by: Luis Machado <luis.machado@arm.com>
- Cc: linux-ide@vger.kernel.org
- Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
- Cc: stable@vger.kernel.org
- Cc: Randy Dunlap <rdunlap@infradead.org>
- Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Tested-by: Luis Machado <luis.machado@arm.com>
- Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
- [Backport to linux-4.19.y]
- Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
- Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4c3ddc06cedb62f2904e58fd95170bf206bee149
- ---
- drivers/ata/ahci.h | 232 +++++++++++++++++++++++----------------------
- 1 file changed, 117 insertions(+), 115 deletions(-)
- diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
- index d5b9f9689877..8cc6cb14767b 100644
- --- a/drivers/ata/ahci.h
- +++ b/drivers/ata/ahci.h
- @@ -40,6 +40,7 @@
- #include <linux/libata.h>
- #include <linux/phy/phy.h>
- #include <linux/regulator/consumer.h>
- +#include <linux/bits.h>
-
- /* Enclosure Management Control */
- #define EM_CTRL_MSG_TYPE 0x000f0000
- @@ -70,12 +71,12 @@ enum {
- AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ +
- AHCI_CMD_TBL_AR_SZ +
- (AHCI_RX_FIS_SZ * 16),
- - AHCI_IRQ_ON_SG = (1 << 31),
- - AHCI_CMD_ATAPI = (1 << 5),
- - AHCI_CMD_WRITE = (1 << 6),
- - AHCI_CMD_PREFETCH = (1 << 7),
- - AHCI_CMD_RESET = (1 << 8),
- - AHCI_CMD_CLR_BUSY = (1 << 10),
- + AHCI_IRQ_ON_SG = BIT(31),
- + AHCI_CMD_ATAPI = BIT(5),
- + AHCI_CMD_WRITE = BIT(6),
- + AHCI_CMD_PREFETCH = BIT(7),
- + AHCI_CMD_RESET = BIT(8),
- + AHCI_CMD_CLR_BUSY = BIT(10),
-
- RX_FIS_PIO_SETUP = 0x20, /* offset of PIO Setup FIS data */
- RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
- @@ -93,37 +94,37 @@ enum {
- HOST_CAP2 = 0x24, /* host capabilities, extended */
-
- /* HOST_CTL bits */
- - HOST_RESET = (1 << 0), /* reset controller; self-clear */
- - HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
- - HOST_MRSM = (1 << 2), /* MSI Revert to Single Message */
- - HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
- + HOST_RESET = BIT(0), /* reset controller; self-clear */
- + HOST_IRQ_EN = BIT(1), /* global IRQ enable */
- + HOST_MRSM = BIT(2), /* MSI Revert to Single Message */
- + HOST_AHCI_EN = BIT(31), /* AHCI enabled */
-
- /* HOST_CAP bits */
- - HOST_CAP_SXS = (1 << 5), /* Supports External SATA */
- - HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
- - HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */
- - HOST_CAP_PART = (1 << 13), /* Partial state capable */
- - HOST_CAP_SSC = (1 << 14), /* Slumber state capable */
- - HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */
- - HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */
- - HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
- - HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */
- - HOST_CAP_CLO = (1 << 24), /* Command List Override support */
- - HOST_CAP_LED = (1 << 25), /* Supports activity LED */
- - HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
- - HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
- - HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */
- - HOST_CAP_SNTF = (1 << 29), /* SNotification register */
- - HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
- - HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
- + HOST_CAP_SXS = BIT(5), /* Supports External SATA */
- + HOST_CAP_EMS = BIT(6), /* Enclosure Management support */
- + HOST_CAP_CCC = BIT(7), /* Command Completion Coalescing */
- + HOST_CAP_PART = BIT(13), /* Partial state capable */
- + HOST_CAP_SSC = BIT(14), /* Slumber state capable */
- + HOST_CAP_PIO_MULTI = BIT(15), /* PIO multiple DRQ support */
- + HOST_CAP_FBS = BIT(16), /* FIS-based switching support */
- + HOST_CAP_PMP = BIT(17), /* Port Multiplier support */
- + HOST_CAP_ONLY = BIT(18), /* Supports AHCI mode only */
- + HOST_CAP_CLO = BIT(24), /* Command List Override support */
- + HOST_CAP_LED = BIT(25), /* Supports activity LED */
- + HOST_CAP_ALPM = BIT(26), /* Aggressive Link PM support */
- + HOST_CAP_SSS = BIT(27), /* Staggered Spin-up */
- + HOST_CAP_MPS = BIT(28), /* Mechanical presence switch */
- + HOST_CAP_SNTF = BIT(29), /* SNotification register */
- + HOST_CAP_NCQ = BIT(30), /* Native Command Queueing */
- + HOST_CAP_64 = BIT(31), /* PCI DAC (64-bit DMA) support */
-
- /* HOST_CAP2 bits */
- - HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
- - HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
- - HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
- - HOST_CAP2_SDS = (1 << 3), /* Support device sleep */
- - HOST_CAP2_SADM = (1 << 4), /* Support aggressive DevSlp */
- - HOST_CAP2_DESO = (1 << 5), /* DevSlp from slumber only */
- + HOST_CAP2_BOH = BIT(0), /* BIOS/OS handoff supported */
- + HOST_CAP2_NVMHCI = BIT(1), /* NVMHCI supported */
- + HOST_CAP2_APST = BIT(2), /* Automatic partial to slumber */
- + HOST_CAP2_SDS = BIT(3), /* Support device sleep */
- + HOST_CAP2_SADM = BIT(4), /* Support aggressive DevSlp */
- + HOST_CAP2_DESO = BIT(5), /* DevSlp from slumber only */
-
- /* registers for each SATA port */
- PORT_LST_ADDR = 0x00, /* command list DMA addr */
- @@ -145,24 +146,25 @@ enum {
- PORT_DEVSLP = 0x44, /* device sleep */
-
- /* PORT_IRQ_{STAT,MASK} bits */
- - PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
- - PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
- - PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
- - PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
- - PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
- - PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
- - PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
- - PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
- -
- - PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
- - PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
- - PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
- - PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
- - PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
- - PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
- - PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
- - PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
- - PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
- + PORT_IRQ_COLD_PRES = BIT(31), /* cold presence detect */
- + PORT_IRQ_TF_ERR = BIT(30), /* task file error */
- + PORT_IRQ_HBUS_ERR = BIT(29), /* host bus fatal error */
- + PORT_IRQ_HBUS_DATA_ERR = BIT(28), /* host bus data error */
- + PORT_IRQ_IF_ERR = BIT(27), /* interface fatal error */
- + PORT_IRQ_IF_NONFATAL = BIT(26), /* interface non-fatal error */
- + PORT_IRQ_OVERFLOW = BIT(24), /* xfer exhausted available S/G */
- + PORT_IRQ_BAD_PMP = BIT(23), /* incorrect port multiplier */
- +
- + PORT_IRQ_PHYRDY = BIT(22), /* PhyRdy changed */
- + PORT_IRQ_DEV_ILCK = BIT(7), /* device interlock */
- + PORT_IRQ_DMPS = BIT(7), /* mechanical presence status */
- + PORT_IRQ_CONNECT = BIT(6), /* port connect change status */
- + PORT_IRQ_SG_DONE = BIT(5), /* descriptor processed */
- + PORT_IRQ_UNK_FIS = BIT(4), /* unknown FIS rx'd */
- + PORT_IRQ_SDB_FIS = BIT(3), /* Set Device Bits FIS rx'd */
- + PORT_IRQ_DMAS_FIS = BIT(2), /* DMA Setup FIS rx'd */
- + PORT_IRQ_PIOS_FIS = BIT(1), /* PIO Setup FIS rx'd */
- + PORT_IRQ_D2H_REG_FIS = BIT(0), /* D2H Register FIS rx'd */
-
- PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
- PORT_IRQ_IF_ERR |
- @@ -178,34 +180,34 @@ enum {
- PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
-
- /* PORT_CMD bits */
- - PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
- - PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
- - PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
- - PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */
- - PORT_CMD_ESP = (1 << 21), /* External Sata Port */
- - PORT_CMD_HPCP = (1 << 18), /* HotPlug Capable Port */
- - PORT_CMD_PMP = (1 << 17), /* PMP attached */
- - PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
- - PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
- - PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
- - PORT_CMD_CLO = (1 << 3), /* Command list override */
- - PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
- - PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
- - PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
- -
- - PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
- - PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
- - PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
- - PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
- + PORT_CMD_ASP = BIT(27), /* Aggressive Slumber/Partial */
- + PORT_CMD_ALPE = BIT(26), /* Aggressive Link PM enable */
- + PORT_CMD_ATAPI = BIT(24), /* Device is ATAPI */
- + PORT_CMD_FBSCP = BIT(22), /* FBS Capable Port */
- + PORT_CMD_ESP = BIT(21), /* External Sata Port */
- + PORT_CMD_HPCP = BIT(18), /* HotPlug Capable Port */
- + PORT_CMD_PMP = BIT(17), /* PMP attached */
- + PORT_CMD_LIST_ON = BIT(15), /* cmd list DMA engine running */
- + PORT_CMD_FIS_ON = BIT(14), /* FIS DMA engine running */
- + PORT_CMD_FIS_RX = BIT(4), /* Enable FIS receive DMA engine */
- + PORT_CMD_CLO = BIT(3), /* Command list override */
- + PORT_CMD_POWER_ON = BIT(2), /* Power up device */
- + PORT_CMD_SPIN_UP = BIT(1), /* Spin up device */
- + PORT_CMD_START = BIT(0), /* Enable port DMA engine */
- +
- + PORT_CMD_ICC_MASK = (0xfu << 28), /* i/f ICC state mask */
- + PORT_CMD_ICC_ACTIVE = (0x1u << 28), /* Put i/f in active state */
- + PORT_CMD_ICC_PARTIAL = (0x2u << 28), /* Put i/f in partial state */
- + PORT_CMD_ICC_SLUMBER = (0x6u << 28), /* Put i/f in slumber state */
-
- /* PORT_FBS bits */
- PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */
- PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */
- PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */
- PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */
- - PORT_FBS_SDE = (1 << 2), /* FBS single device error */
- - PORT_FBS_DEC = (1 << 1), /* FBS device error clear */
- - PORT_FBS_EN = (1 << 0), /* Enable FBS */
- + PORT_FBS_SDE = BIT(2), /* FBS single device error */
- + PORT_FBS_DEC = BIT(1), /* FBS device error clear */
- + PORT_FBS_EN = BIT(0), /* Enable FBS */
-
- /* PORT_DEVSLP bits */
- PORT_DEVSLP_DM_OFFSET = 25, /* DITO multiplier offset */
- @@ -213,45 +215,45 @@ enum {
- PORT_DEVSLP_DITO_OFFSET = 15, /* DITO offset */
- PORT_DEVSLP_MDAT_OFFSET = 10, /* Minimum assertion time */
- PORT_DEVSLP_DETO_OFFSET = 2, /* DevSlp exit timeout */
- - PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */
- - PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */
- + PORT_DEVSLP_DSP = BIT(1), /* DevSlp present */
- + PORT_DEVSLP_ADSE = BIT(0), /* Aggressive DevSlp enable */
-
- /* hpriv->flags bits */
-
- #define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
-
- - AHCI_HFLAG_NO_NCQ = (1 << 0),
- - AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
- - AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
- - AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
- - AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
- - AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
- - AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
- - AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
- - AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
- - AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
- - AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
- - link offline */
- - AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
- - AHCI_HFLAG_NO_FPDMA_AA = (1 << 13), /* no FPDMA AA */
- - AHCI_HFLAG_YES_FBS = (1 << 14), /* force FBS cap on */
- - AHCI_HFLAG_DELAY_ENGINE = (1 << 15), /* do not start engine on
- - port start (wait until
- - error-handling stage) */
- - AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */
- - AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */
- + AHCI_HFLAG_NO_NCQ = BIT(0),
- + AHCI_HFLAG_IGN_IRQ_IF_ERR = BIT(1), /* ignore IRQ_IF_ERR */
- + AHCI_HFLAG_IGN_SERR_INTERNAL = BIT(2), /* ignore SERR_INTERNAL */
- + AHCI_HFLAG_32BIT_ONLY = BIT(3), /* force 32bit */
- + AHCI_HFLAG_MV_PATA = BIT(4), /* PATA port */
- + AHCI_HFLAG_NO_MSI = BIT(5), /* no PCI MSI */
- + AHCI_HFLAG_NO_PMP = BIT(6), /* no PMP */
- + AHCI_HFLAG_SECT255 = BIT(8), /* max 255 sectors */
- + AHCI_HFLAG_YES_NCQ = BIT(9), /* force NCQ cap on */
- + AHCI_HFLAG_NO_SUSPEND = BIT(10), /* don't suspend */
- + AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = BIT(11), /* treat SRST timeout as
- + link offline */
- + AHCI_HFLAG_NO_SNTF = BIT(12), /* no sntf */
- + AHCI_HFLAG_NO_FPDMA_AA = BIT(13), /* no FPDMA AA */
- + AHCI_HFLAG_YES_FBS = BIT(14), /* force FBS cap on */
- + AHCI_HFLAG_DELAY_ENGINE = BIT(15), /* do not start engine on
- + port start (wait until
- + error-handling stage) */
- + AHCI_HFLAG_NO_DEVSLP = BIT(17), /* no device sleep */
- + AHCI_HFLAG_NO_FBS = BIT(18), /* no FBS */
-
- #ifdef CONFIG_PCI_MSI
- - AHCI_HFLAG_MULTI_MSI = (1 << 20), /* per-port MSI(-X) */
- + AHCI_HFLAG_MULTI_MSI = BIT(20), /* per-port MSI(-X) */
- #else
- /* compile out MSI infrastructure */
- AHCI_HFLAG_MULTI_MSI = 0,
- #endif
- - AHCI_HFLAG_WAKE_BEFORE_STOP = (1 << 22), /* wake before DMA stop */
- - AHCI_HFLAG_YES_ALPM = (1 << 23), /* force ALPM cap on */
- - AHCI_HFLAG_NO_WRITE_TO_RO = (1 << 24), /* don't write to read
- - only registers */
- - AHCI_HFLAG_IS_MOBILE = (1 << 25), /* mobile chipset, use
- + AHCI_HFLAG_WAKE_BEFORE_STOP = BIT(22), /* wake before DMA stop */
- + AHCI_HFLAG_YES_ALPM = BIT(23), /* force ALPM cap on */
- + AHCI_HFLAG_NO_WRITE_TO_RO = BIT(24), /* don't write to read
- + only registers */
- + AHCI_HFLAG_IS_MOBILE = BIT(25), /* mobile chipset, use
- SATA_MOBILE_LPM_POLICY
- as default lpm_policy */
-
- @@ -269,22 +271,22 @@ enum {
- EM_MAX_RETRY = 5,
-
- /* em_ctl bits */
- - EM_CTL_RST = (1 << 9), /* Reset */
- - EM_CTL_TM = (1 << 8), /* Transmit Message */
- - EM_CTL_MR = (1 << 0), /* Message Received */
- - EM_CTL_ALHD = (1 << 26), /* Activity LED */
- - EM_CTL_XMT = (1 << 25), /* Transmit Only */
- - EM_CTL_SMB = (1 << 24), /* Single Message Buffer */
- - EM_CTL_SGPIO = (1 << 19), /* SGPIO messages supported */
- - EM_CTL_SES = (1 << 18), /* SES-2 messages supported */
- - EM_CTL_SAFTE = (1 << 17), /* SAF-TE messages supported */
- - EM_CTL_LED = (1 << 16), /* LED messages supported */
- + EM_CTL_RST = BIT(9), /* Reset */
- + EM_CTL_TM = BIT(8), /* Transmit Message */
- + EM_CTL_MR = BIT(0), /* Message Received */
- + EM_CTL_ALHD = BIT(26), /* Activity LED */
- + EM_CTL_XMT = BIT(25), /* Transmit Only */
- + EM_CTL_SMB = BIT(24), /* Single Message Buffer */
- + EM_CTL_SGPIO = BIT(19), /* SGPIO messages supported */
- + EM_CTL_SES = BIT(18), /* SES-2 messages supported */
- + EM_CTL_SAFTE = BIT(17), /* SAF-TE messages supported */
- + EM_CTL_LED = BIT(16), /* LED messages supported */
-
- /* em message type */
- - EM_MSG_TYPE_LED = (1 << 0), /* LED */
- - EM_MSG_TYPE_SAFTE = (1 << 1), /* SAF-TE */
- - EM_MSG_TYPE_SES2 = (1 << 2), /* SES-2 */
- - EM_MSG_TYPE_SGPIO = (1 << 3), /* SGPIO */
- + EM_MSG_TYPE_LED = BIT(0), /* LED */
- + EM_MSG_TYPE_SAFTE = BIT(1), /* SAF-TE */
- + EM_MSG_TYPE_SES2 = BIT(2), /* SES-2 */
- + EM_MSG_TYPE_SGPIO = BIT(3), /* SGPIO */
- };
-
- struct ahci_cmd_hdr {
- --
- 2.43.0
|