Revert Atmel patches for now

toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch

@@ -1,17772 +0,0 @@
-diff --git a/MAINTAINERS b/MAINTAINERS
-index 277877a..a5bdfa6 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -1434,6 +1434,11 @@ L:	linux-scsi@vger.kernel.org
- W:	http://www.icp-vortex.com/
- S:	Supported
- 
-+GENERIC GPIO I2C DRIVER
-+P:	Haavard Skinnemoen
-+M:	hskinnemoen@atmel.com
-+S:	Supported
-+
- GENERIC HDLC DRIVER, N2, C101, PCI200SYN and WANXL DRIVERS
- P:	Krzysztof Halasa
- M:	khc@pm.waw.pl
-diff --git a/Makefile b/Makefile
-index 7980f39..388b666 100644
---- a/Makefile
-+++ b/Makefile
-@@ -1,7 +1,7 @@
- VERSION = 2
- PATCHLEVEL = 6
- SUBLEVEL = 21
--EXTRAVERSION = .3
-+EXTRAVERSION = .3.atmel.1
- NAME = Nocturnal Monster Puppy
- 
- # *DOCUMENTATION*
-diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
-index ce4013a..3956118 100644
---- a/arch/avr32/Kconfig
-+++ b/arch/avr32/Kconfig
-@@ -57,9 +57,6 @@ config ARCH_HAS_ILOG2_U64
- 	bool
- 	default n
- 
--config GENERIC_BUST_SPINLOCK
--	bool
--
- config GENERIC_HWEIGHT
- 	bool
- 	default y
-@@ -68,6 +65,11 @@ config GENERIC_CALIBRATE_DELAY
- 	bool
- 	default y
- 
-+config GENERIC_BUG
-+	bool
-+	default y
-+	depends on BUG
-+
- source "init/Kconfig"
- 
- menu "System Type and features"
-@@ -106,6 +108,9 @@ choice
- config BOARD_ATSTK1000
- 	bool "ATSTK1000 evaluation board"
- 	select BOARD_ATSTK1002 if CPU_AT32AP7000
-+
-+config BOARD_ATNGW100
-+	bool "ATNGW100 Network Gateway"
- endchoice
- 
- choice
-@@ -116,6 +121,8 @@ config	LOADER_U_BOOT
- 	bool "U-Boot (or similar) bootloader"
- endchoice
- 
-+source "arch/avr32/mach-at32ap/Kconfig"
-+
- config LOAD_ADDRESS
- 	hex
- 	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
-@@ -164,6 +171,10 @@ config OWNERSHIP_TRACE
- 	  enabling Nexus-compliant debuggers to keep track of the PID of the
- 	  currently executing task.
- 
-+config DW_DMAC
-+	tristate "Synopsys DesignWare DMA Controller support"
-+	default y if CPU_AT32AP7000
-+
- # FPU emulation goes here
- 
- source "kernel/Kconfig.hz"
-diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
-index 7b842e9..eb72198 100644
---- a/arch/avr32/Makefile
-+++ b/arch/avr32/Makefile
-@@ -16,7 +16,7 @@ AFLAGS		+= -mrelax -mno-pic
- CFLAGS_MODULE	+= -mno-relax
- LDFLAGS_vmlinux	+= --relax
- 
--cpuflags-$(CONFIG_CPU_AP7000)	+= -mcpu=ap7000
-+cpuflags-$(CONFIG_CPU_AT32AP7000)	+= -mcpu=ap7000
- 
- CFLAGS		+= $(cpuflags-y)
- AFLAGS		+= $(cpuflags-y)
-@@ -27,9 +27,11 @@ head-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/head.o
- head-y					+= arch/avr32/kernel/head.o
- core-$(CONFIG_PLATFORM_AT32AP)		+= arch/avr32/mach-at32ap/
- core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
-+core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
- core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
- core-y					+= arch/avr32/kernel/
- core-y					+= arch/avr32/mm/
-+drivers-y				+= arch/avr32/drivers/
- libs-y					+= arch/avr32/lib/
- 
- archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
-diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
-new file mode 100644
-index 0000000..c740aa1
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/Makefile
-@@ -0,0 +1 @@
-+obj-y				+= setup.o flash.o
-diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
-new file mode 100644
-index 0000000..f9b32a8
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/flash.c
-@@ -0,0 +1,95 @@
-+/*
-+ * ATNGW100 board-specific flash initialization
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/arch/smc.h>
-+
-+static struct smc_config flash_config __initdata = {
-+	.ncs_read_setup		= 0,
-+	.nrd_setup		= 40,
-+	.ncs_write_setup	= 0,
-+	.nwe_setup		= 10,
-+
-+	.ncs_read_pulse		= 80,
-+	.nrd_pulse		= 40,
-+	.ncs_write_pulse	= 65,
-+	.nwe_pulse		= 55,
-+
-+	.read_cycle		= 120,
-+	.write_cycle		= 120,
-+
-+	.bus_width		= 2,
-+	.nrd_controlled		= 1,
-+	.nwe_controlled		= 1,
-+	.byte_write		= 1,
-+};
-+
-+static struct mtd_partition flash_parts[] = {
-+	{
-+		.name           = "u-boot",
-+		.offset         = 0x00000000,
-+		.size           = 0x00020000,           /* 128 KiB */
-+		.mask_flags     = MTD_WRITEABLE,
-+	},
-+	{
-+		.name           = "root",
-+		.offset         = 0x00020000,
-+		.size           = 0x007d0000,
-+	},
-+	{
-+		.name           = "env",
-+		.offset         = 0x007f0000,
-+		.size           = 0x00010000,
-+		.mask_flags     = MTD_WRITEABLE,
-+	},
-+};
-+
-+static struct physmap_flash_data flash_data = {
-+	.width		= 2,
-+	.nr_parts	= ARRAY_SIZE(flash_parts),
-+	.parts		= flash_parts,
-+};
-+
-+static struct resource flash_resource = {
-+	.start		= 0x00000000,
-+	.end		= 0x007fffff,
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device flash_device = {
-+	.name		= "physmap-flash",
-+	.id		= 0,
-+	.resource	= &flash_resource,
-+	.num_resources	= 1,
-+	.dev		= {
-+		.platform_data = &flash_data,
-+	},
-+};
-+
-+/* This needs to be called after the SMC has been initialized */
-+static int __init atngw100_flash_init(void)
-+{
-+	int ret;
-+
-+	ret = smc_set_configuration(0, &flash_config);
-+	if (ret < 0) {
-+		printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
-+		return ret;
-+	}
-+
-+	platform_device_register(&flash_device);
-+
-+	return 0;
-+}
-+device_initcall(atngw100_flash_init);
-diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
-new file mode 100644
-index 0000000..3cbdc2d
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/setup.c
-@@ -0,0 +1,131 @@
-+/*
-+ * Board-specific setup code for the ATNGW100 Network Gateway
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/etherdevice.h>
-+#include <linux/init.h>
-+#include <linux/linkage.h>
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/io.h>
-+#include <asm/setup.h>
-+
-+#include <asm/arch/at32ap7000.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/init.h>
-+
-+/* Initialized by bootloader-specific startup code. */
-+struct tag *bootloader_tags __initdata;
-+
-+struct eth_addr {
-+	u8 addr[6];
-+};
-+static struct eth_addr __initdata hw_addr[2];
-+static struct eth_platform_data __initdata eth_data[2];
-+
-+static struct spi_board_info spi0_board_info[] __initdata = {
-+	{
-+		.modalias	= "mtd_dataflash",
-+		.max_speed_hz	= 10000000,
-+		.chip_select	= 0,
-+	},
-+};
-+
-+static struct mci_platform_data __initdata mci0_data = {
-+	.detect_pin	= GPIO_PIN_PC(25),
-+	.wp_pin		= GPIO_PIN_PE(0),
-+};
-+
-+/*
-+ * The next two functions should go away as the boot loader is
-+ * supposed to initialize the macb address registers with a valid
-+ * ethernet address. But we need to keep it around for a while until
-+ * we can be reasonably sure the boot loader does this.
-+ *
-+ * The phy_id is ignored as the driver will probe for it.
-+ */
-+static int __init parse_tag_ethernet(struct tag *tag)
-+{
-+	int i;
-+
-+	i = tag->u.ethernet.mac_index;
-+	if (i < ARRAY_SIZE(hw_addr))
-+		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-+		       sizeof(hw_addr[i].addr));
-+
-+	return 0;
-+}
-+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-+
-+static void __init set_hw_addr(struct platform_device *pdev)
-+{
-+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	const u8 *addr;
-+	void __iomem *regs;
-+	struct clk *pclk;
-+
-+	if (!res)
-+		return;
-+	if (pdev->id >= ARRAY_SIZE(hw_addr))
-+		return;
-+
-+	addr = hw_addr[pdev->id].addr;
-+	if (!is_valid_ether_addr(addr))
-+		return;
-+
-+	/*
-+	 * Since this is board-specific code, we'll cheat and use the
-+	 * physical address directly as we happen to know that it's
-+	 * the same as the virtual address.
-+	 */
-+	regs = (void __iomem __force *)res->start;
-+	pclk = clk_get(&pdev->dev, "pclk");
-+	if (!pclk)
-+		return;
-+
-+	clk_enable(pclk);
-+	__raw_writel((addr[3] << 24) | (addr[2] << 16)
-+		     | (addr[1] << 8) | addr[0], regs + 0x98);
-+	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-+	clk_disable(pclk);
-+	clk_put(pclk);
-+}
-+
-+struct platform_device *at32_usart_map[1];
-+unsigned int at32_nr_usarts = 1;
-+
-+void __init setup_board(void)
-+{
-+	at32_map_usart(1, 0);	/* USART 1: /dev/ttyS0, DB9 */
-+	at32_setup_serial_console(0);
-+}
-+
-+static int __init atngw100_init(void)
-+{
-+	/*
-+	 * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
-+	 * reserve any pins for it.
-+	 */
-+
-+	at32_add_system_devices();
-+
-+	at32_add_device_usart(0);
-+
-+	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-+	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
-+
-+	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+	at32_add_device_mci(0, &mci0_data);
-+	at32_add_device_usba(0);
-+
-+	return 0;
-+}
-+postcore_initcall(atngw100_init);
-diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
-new file mode 100644
-index 0000000..9a49ed0
---- /dev/null
-+++ b/arch/avr32/boards/atstk1000/atstk1000.h
-@@ -0,0 +1,15 @@
-+/*
-+ * ATSTK1000 setup code: Daughterboard interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
-+#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
-+
-+extern struct atmel_lcdfb_info atstk1000_lcdc_data;
-+
-+#endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index 5974768..84c22b2 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -14,7 +14,12 @@
- #include <linux/platform_device.h>
- #include <linux/string.h>
- #include <linux/types.h>
-+
- #include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+#include <linux/gpio_mouse.h>
-+
-+#include <video/atmel_lcdc.h>
- 
- #include <asm/io.h>
- #include <asm/setup.h>
-@@ -23,6 +28,7 @@
- #include <asm/arch/init.h>
- #include <asm/arch/portmux.h>
- 
-+#include "atstk1000.h"
- 
- #define	SW2_DEFAULT		/* MMCI and UART_A available */
- 
-@@ -31,19 +37,82 @@ struct eth_addr {
- };
- 
- static struct eth_addr __initdata hw_addr[2];
--
- static struct eth_platform_data __initdata eth_data[2];
--extern struct lcdc_platform_data atstk1000_fb0_data;
-+
-+static struct at73c213_board_info at73c213_data = {
-+	.dac_clk	= "gclk0",
-+	.i2s_dev	= 0,
-+	.shortname	= "AVR32 STK1000 external DAC",
-+};
-+
-+static struct cf_platform_data __initdata cf0_data = {
-+	.detect_pin	= GPIO_PIN_PB(15),
-+	.reset_pin	= GPIO_PIN_PB(30),
-+};
- 
- static struct spi_board_info spi0_board_info[] __initdata = {
- 	{
-+		/* AT73C213 */
-+		.modalias	= "at73c213",
-+		.max_speed_hz	= 200000,
-+		.chip_select	= 0,
-+		.mode		= SPI_MODE_1,
-+		.platform_data	= &at73c213_data,
-+	},
-+	{
- 		/* QVGA display */
- 		.modalias	= "ltv350qv",
- 		.max_speed_hz	= 16000000,
- 		.chip_select	= 1,
-+		.mode		= SPI_MODE_3,
- 	},
- };
- 
-+static struct mci_platform_data __initdata mci0_data = {
-+	.detect_pin	= GPIO_PIN_NONE,
-+	.wp_pin		= GPIO_PIN_NONE,
-+};
-+
-+/* The next two structs and functions are for adding gpio_mouse
-+ * support to the board
-+ */
-+static struct gpio_mouse_platform_data gpio_mouse0_data = {
-+	.polarity	= GPIO_MOUSE_POLARITY_ACT_LOW,
-+	.up		= GPIO_PIN_PB(2),
-+	.down		= GPIO_PIN_PB(1),
-+	.left		= GPIO_PIN_PB(3),
-+	.right		= GPIO_PIN_PB(0),
-+	.bleft		= GPIO_PIN_PB(7),
-+	.bmiddle	= GPIO_PIN_PB(6),
-+	.bright		= GPIO_PIN_PB(5),
-+	.scan_ms	= 10,
-+};
-+
-+static struct platform_device gpio_mouse0_device = {
-+	.name		= "gpio_mouse",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &gpio_mouse0_data,
-+	},
-+};
-+
-+static void __init add_device_gpio_mouse0(void)
-+{
-+	struct platform_device *pdev = &gpio_mouse0_device;
-+	struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
-+
-+	at32_select_gpio(data->up, 0);
-+	at32_select_gpio(data->down, 0);
-+	at32_select_gpio(data->left, 0);
-+	at32_select_gpio(data->right, 0);
-+
-+	at32_select_gpio(data->bleft, 0);
-+	at32_select_gpio(data->bmiddle, 0);
-+	at32_select_gpio(data->bright, 0);
-+
-+	platform_device_register(pdev);
-+}
-+
- /*
-  * The next two functions should go away as the boot loader is
-  * supposed to initialize the macb address registers with a valid
-@@ -99,6 +168,29 @@ static void __init set_hw_addr(struct platform_device *pdev)
- 	clk_put(pclk);
- }
- 
-+static void __init set_at73c213_init_gclk(struct at73c213_board_info *info)
-+{
-+	struct clk *gclk = clk_get(NULL, info->dac_clk);
-+	struct clk *pll = clk_get(NULL, "pll0");
-+
-+	if (!IS_ERR(gclk) && !IS_ERR(pll)) {
-+		if(clk_set_parent(gclk, pll) != 0)
-+			goto cleanup;
-+	} else {
-+		goto cleanup;
-+	}
-+
-+	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+	return;
-+
-+cleanup:
-+	if(!IS_ERR(gclk))
-+		clk_put(gclk);
-+	if(!IS_ERR(pll))
-+		clk_put(pll);
-+	return;
-+}
-+
- void __init setup_board(void)
- {
- #ifdef	SW2_DEFAULT
-@@ -148,7 +240,18 @@ static int __init atstk1002_init(void)
- 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
- 
- 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
--	at32_add_device_lcdc(0, &atstk1000_fb0_data);
-+	at32_add_device_twi(0);
-+	at32_add_device_mci(0, &mci0_data);
-+	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-+			     fbmem_start, fbmem_size);
-+	at32_add_device_usba(0);
-+	at32_add_device_ssc(0, ATMEL_SSC_TX);
-+	at32_add_device_abdac(0);
-+	at32_add_device_cf(0, 3, &cf0_data);
-+
-+	set_at73c213_init_gclk(&at73c213_data);
-+
-+	add_device_gpio_mouse0();
- 
- 	return 0;
- }
-diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
-index 272c011..c9af409 100644
---- a/arch/avr32/boards/atstk1000/setup.c
-+++ b/arch/avr32/boards/atstk1000/setup.c
-@@ -8,43 +8,56 @@
-  * published by the Free Software Foundation.
-  */
- #include <linux/bootmem.h>
-+#include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/types.h>
- #include <linux/linkage.h>
- 
--#include <asm/setup.h>
-+#include <video/atmel_lcdc.h>
- 
-+#include <asm/setup.h>
- #include <asm/arch/board.h>
- 
-+#include "atstk1000.h"
-+
- /* Initialized by bootloader-specific startup code. */
- struct tag *bootloader_tags __initdata;
- 
--struct lcdc_platform_data __initdata atstk1000_fb0_data;
--
--void __init board_setup_fbmem(unsigned long fbmem_start,
--			      unsigned long fbmem_size)
--{
--	if (!fbmem_size)
--		return;
--
--	if (!fbmem_start) {
--		void *fbmem;
--
--		fbmem = alloc_bootmem_low_pages(fbmem_size);
--		fbmem_start = __pa(fbmem);
--	} else {
--		pg_data_t *pgdat;
--
--		for_each_online_pgdat(pgdat) {
--			if (fbmem_start >= pgdat->bdata->node_boot_start
--			    && fbmem_start <= pgdat->bdata->node_low_pfn)
--				reserve_bootmem_node(pgdat, fbmem_start,
--						     fbmem_size);
--		}
--	}
--
--	printk("%luKiB framebuffer memory at address 0x%08lx\n",
--	       fbmem_size >> 10, fbmem_start);
--	atstk1000_fb0_data.fbmem_start = fbmem_start;
--	atstk1000_fb0_data.fbmem_size = fbmem_size;
--}
-+static struct fb_videomode __initdata ltv350qv_modes[] = {
-+	{
-+		.name		= "320x240 @ 75",
-+		.refresh	= 75,
-+		.xres		= 320,		.yres		= 240,
-+		.pixclock	= KHZ2PICOS(6891),
-+
-+		.left_margin	= 17,		.right_margin	= 33,
-+		.upper_margin	= 10,		.lower_margin	= 10,
-+		.hsync_len	= 16,		.vsync_len	= 1,
-+
-+		.sync		= 0,
-+		.vmode		= FB_VMODE_NONINTERLACED,
-+	},
-+};
-+
-+static struct fb_monspecs __initdata atstk1000_default_monspecs = {
-+	.manufacturer		= "SNG",
-+	.monitor		= "LTV350QV",
-+	.modedb			= ltv350qv_modes,
-+	.modedb_len		= ARRAY_SIZE(ltv350qv_modes),
-+	.hfmin			= 14820,
-+	.hfmax			= 22230,
-+	.vfmin			= 60,
-+	.vfmax			= 90,
-+	.dclkmax		= 30000000,
-+};
-+
-+struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
-+	.default_bpp		= 24,
-+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-+				   | ATMEL_LCDC_INVCLK
-+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-+				   | ATMEL_LCDC_MEMOR_BIG),
-+	.default_monspecs	= &atstk1000_default_monspecs,
-+	.guard_time		= 2,
-+};
-diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
-new file mode 100644
-index 0000000..c254ffc
---- /dev/null
-+++ b/arch/avr32/configs/atngw100_defconfig
-@@ -0,0 +1,1085 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.21-rc6
-+# Thu Apr 12 16:35:07 2007
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+CONFIG_BSD_PROCESS_ACCT_V3=y
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SHMEM=y
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+# CONFIG_SLOB is not set
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
-+# System Type and features
-+#
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP7000=y
-+# CONFIG_BOARD_ATSTK1000 is not set
-+CONFIG_BOARD_ATNGW100=y
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+# CONFIG_AP7000_32_BIT_SMC is not set
-+CONFIG_AP7000_16_BIT_SMC=y
-+# CONFIG_AP7000_8_BIT_SMC is not set
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+# CONFIG_OWNERSHIP_TRACE is not set
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+CONFIG_CMDLINE=""
-+
-+#
-+# Bus options
-+#
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=y
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+CONFIG_IP_MROUTE=y
-+CONFIG_IP_PIMSM_V1=y
-+# CONFIG_IP_PIMSM_V2 is not set
-+# CONFIG_ARPD is not set
-+CONFIG_SYN_COOKIES=y
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+CONFIG_INET_IPCOMP=y
-+CONFIG_INET_XFRM_TUNNEL=y
-+CONFIG_INET_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+
-+#
-+# IP: Virtual Server Configuration
-+#
-+# CONFIG_IP_VS is not set
-+CONFIG_IPV6=y
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+CONFIG_INET6_AH=y
-+CONFIG_INET6_ESP=y
-+CONFIG_INET6_IPCOMP=y
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=y
-+CONFIG_INET6_TUNNEL=y
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET6_XFRM_MODE_TUNNEL=y
-+CONFIG_INET6_XFRM_MODE_BEET=y
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=y
-+# CONFIG_IPV6_TUNNEL is not set
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+CONFIG_NETFILTER=y
-+# CONFIG_NETFILTER_DEBUG is not set
-+
-+#
-+# Core Netfilter Configuration
-+#
-+# CONFIG_NETFILTER_NETLINK is not set
-+CONFIG_NF_CONNTRACK_ENABLED=m
-+CONFIG_NF_CONNTRACK_SUPPORT=y
-+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-+CONFIG_NF_CONNTRACK=m
-+CONFIG_NF_CT_ACCT=y
-+CONFIG_NF_CONNTRACK_MARK=y
-+# CONFIG_NF_CONNTRACK_EVENTS is not set
-+CONFIG_NF_CT_PROTO_GRE=m
-+# CONFIG_NF_CT_PROTO_SCTP is not set
-+CONFIG_NF_CONNTRACK_AMANDA=m
-+CONFIG_NF_CONNTRACK_FTP=m
-+CONFIG_NF_CONNTRACK_H323=m
-+CONFIG_NF_CONNTRACK_IRC=m
-+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-+CONFIG_NF_CONNTRACK_PPTP=m
-+CONFIG_NF_CONNTRACK_SANE=m
-+CONFIG_NF_CONNTRACK_SIP=m
-+CONFIG_NF_CONNTRACK_TFTP=m
-+CONFIG_NETFILTER_XTABLES=y
-+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-+CONFIG_NETFILTER_XT_TARGET_MARK=m
-+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-+CONFIG_NETFILTER_XT_MATCH_ESP=m
-+CONFIG_NETFILTER_XT_MATCH_HELPER=m
-+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-+CONFIG_NETFILTER_XT_MATCH_MAC=m
-+CONFIG_NETFILTER_XT_MATCH_MARK=m
-+CONFIG_NETFILTER_XT_MATCH_POLICY=m
-+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-+CONFIG_NETFILTER_XT_MATCH_REALM=m
-+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-+CONFIG_NETFILTER_XT_MATCH_STATE=m
-+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-+CONFIG_NETFILTER_XT_MATCH_STRING=m
-+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-+
-+#
-+# IP: Netfilter Configuration
-+#
-+CONFIG_NF_CONNTRACK_IPV4=m
-+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-+# CONFIG_IP_NF_QUEUE is not set
-+CONFIG_IP_NF_IPTABLES=m
-+CONFIG_IP_NF_MATCH_IPRANGE=m
-+CONFIG_IP_NF_MATCH_TOS=m
-+CONFIG_IP_NF_MATCH_RECENT=m
-+CONFIG_IP_NF_MATCH_ECN=m
-+CONFIG_IP_NF_MATCH_AH=m
-+CONFIG_IP_NF_MATCH_TTL=m
-+CONFIG_IP_NF_MATCH_OWNER=m
-+CONFIG_IP_NF_MATCH_ADDRTYPE=m
-+CONFIG_IP_NF_FILTER=m
-+CONFIG_IP_NF_TARGET_REJECT=m
-+CONFIG_IP_NF_TARGET_LOG=m
-+# CONFIG_IP_NF_TARGET_ULOG is not set
-+CONFIG_NF_NAT=m
-+CONFIG_NF_NAT_NEEDED=y
-+CONFIG_IP_NF_TARGET_MASQUERADE=m
-+CONFIG_IP_NF_TARGET_REDIRECT=m
-+CONFIG_IP_NF_TARGET_NETMAP=m
-+CONFIG_IP_NF_TARGET_SAME=m
-+CONFIG_NF_NAT_SNMP_BASIC=m
-+CONFIG_NF_NAT_PROTO_GRE=m
-+CONFIG_NF_NAT_FTP=m
-+CONFIG_NF_NAT_IRC=m
-+CONFIG_NF_NAT_TFTP=m
-+CONFIG_NF_NAT_AMANDA=m
-+CONFIG_NF_NAT_PPTP=m
-+CONFIG_NF_NAT_H323=m
-+CONFIG_NF_NAT_SIP=m
-+CONFIG_IP_NF_MANGLE=m
-+CONFIG_IP_NF_TARGET_TOS=m
-+CONFIG_IP_NF_TARGET_ECN=m
-+CONFIG_IP_NF_TARGET_TTL=m
-+CONFIG_IP_NF_TARGET_CLUSTERIP=m
-+CONFIG_IP_NF_RAW=m
-+CONFIG_IP_NF_ARPTABLES=m
-+CONFIG_IP_NF_ARPFILTER=m
-+CONFIG_IP_NF_ARP_MANGLE=m
-+
-+#
-+# IPv6: Netfilter Configuration (EXPERIMENTAL)
-+#
-+CONFIG_NF_CONNTRACK_IPV6=m
-+CONFIG_IP6_NF_QUEUE=m
-+CONFIG_IP6_NF_IPTABLES=m
-+CONFIG_IP6_NF_MATCH_RT=m
-+CONFIG_IP6_NF_MATCH_OPTS=m
-+CONFIG_IP6_NF_MATCH_FRAG=m
-+CONFIG_IP6_NF_MATCH_HL=m
-+CONFIG_IP6_NF_MATCH_OWNER=m
-+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-+CONFIG_IP6_NF_MATCH_AH=m
-+CONFIG_IP6_NF_MATCH_MH=m
-+CONFIG_IP6_NF_MATCH_EUI64=m
-+CONFIG_IP6_NF_FILTER=m
-+CONFIG_IP6_NF_TARGET_LOG=m
-+CONFIG_IP6_NF_TARGET_REJECT=m
-+CONFIG_IP6_NF_MANGLE=m
-+CONFIG_IP6_NF_TARGET_HL=m
-+CONFIG_IP6_NF_RAW=m
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+CONFIG_VLAN_8021Q=m
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+CONFIG_NET_CLS_ROUTE=y
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_IEEE80211 is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x80000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+# CONFIG_MTD_NAND is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+# CONFIG_PNPACPI is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# Misc devices
-+#
-+
-+#
-+# ATA/ATAPI/MFM/RLL support
-+#
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+# CONFIG_SCSI is not set
-+# CONFIG_SCSI_NETLINK is not set
-+
-+#
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# I2O device support
-+#
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+CONFIG_TUN=m
-+
-+#
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_MACB=y
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+
-+#
-+# Token Ring devices
-+#
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+# CONFIG_NET_RADIO is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+CONFIG_PPP_FILTER=y
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+CONFIG_PPP_MPPE=m
-+CONFIG_PPPOE=m
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Telephony Support
-+#
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+# CONFIG_INPUT is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_VT is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+
-+#
-+# Watchdog Cards
-+#
-+# CONFIG_WATCHDOG is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_RTC is not set
-+# CONFIG_GEN_RTC is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+
-+#
-+# I2C support
-+#
-+# CONFIG_I2C is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+# CONFIG_HWMON is not set
-+# CONFIG_HWMON_VID is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Digital Video Broadcasting Devices
-+#
-+# CONFIG_DVB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+# CONFIG_FB is not set
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+
-+#
-+# USB support
-+#
-+# CONFIG_USB_ARCH_HAS_HCD is not set
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# MMC/SD Card support
-+#
-+# CONFIG_MMC is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
-+# InfiniBand support
-+#
-+
-+#
-+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-+#
-+
-+#
-+# Real Time Clock
-+#
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# DMA Engine support
-+#
-+# CONFIG_DMA_ENGINE is not set
-+
-+#
-+# DMA Clients
-+#
-+
-+#
-+# DMA Devices
-+#
-+
-+#
-+# Auxiliary Display support
-+#
-+
-+#
-+# Virtualization
-+#
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_DNOTIFY is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=850
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+CONFIG_CIFS=m
-+# CONFIG_CIFS_STATS is not set
-+# CONFIG_CIFS_WEAK_PW_HASH is not set
-+# CONFIG_CIFS_XATTR is not set
-+# CONFIG_CIFS_DEBUG2 is not set
-+# CONFIG_CIFS_EXPERIMENTAL is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+# CONFIG_NLS_CODEPAGE_437 is not set
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_FORCED_INLINING is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_KPROBES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+CONFIG_CRYPTO_ECB=m
-+CONFIG_CRYPTO_CBC=y
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+CONFIG_CRYPTO_ARC4=m
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+CONFIG_CRYPTO_DEFLATE=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Hardware crypto devices
-+#
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=m
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC32=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_TEXTSEARCH=y
-+CONFIG_TEXTSEARCH_KMP=m
-+CONFIG_TEXTSEARCH_BM=m
-+CONFIG_TEXTSEARCH_FSM=m
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
-new file mode 100644
-index 0000000..b429b75
---- /dev/null
-+++ b/arch/avr32/drivers/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC)			+= dw-dmac.o
-diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
-new file mode 100644
-index 0000000..9c1d27a
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.c
-@@ -0,0 +1,761 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+
-+#include "dw-dmac.h"
-+
-+#define DMAC_NR_CHANNELS 3
-+#define DMAC_MAX_BLOCKSIZE 4095
-+
-+enum {
-+	CH_STATE_FREE = 0,
-+	CH_STATE_ALLOCATED,
-+	CH_STATE_BUSY,
-+};
-+
-+struct dw_dma_lli {
-+	dma_addr_t	sar;
-+	dma_addr_t	dar;
-+	dma_addr_t	llp;
-+	u32		ctllo;
-+	u32		ctlhi;
-+	u32		sstat;
-+	u32		dstat;
-+};
-+
-+struct dw_dma_block {
-+	struct dw_dma_lli *lli_vaddr;
-+	dma_addr_t lli_dma_addr;
-+};
-+
-+struct dw_dma_channel {
-+	unsigned int state;
-+        int is_cyclic;
-+	struct dma_request_sg *req_sg;
-+	struct dma_request_cyclic *req_cyclic;
-+	unsigned int nr_blocks;
-+	int direction;
-+	struct dw_dma_block *block;
-+};
-+
-+struct dw_dma_controller {
-+	spinlock_t lock;
-+	void * __iomem	regs;
-+	struct dma_pool *lli_pool;
-+	struct clk *hclk;
-+	struct dma_controller dma;
-+	struct dw_dma_channel channel[DMAC_NR_CHANNELS];
-+};
-+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
-+
-+#define dmac_writel_hi(dmac, reg, value) \
-+	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_readl_hi(dmac, reg) \
-+	__raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_writel_lo(dmac, reg, value) \
-+	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
-+#define dmac_readl_lo(dmac, reg) \
-+	__raw_readl((dmac)->regs + DW_DMAC_##reg)
-+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
-+	__raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
-+			       + DW_DMAC_CHAN_##reg + 4))
-+#define dmac_chan_readl_hi(dmac, chan, reg) \
-+	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
-+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
-+	__raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define dmac_chan_readl_lo(dmac, chan, reg) \
-+	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define set_channel_bit(dmac, reg, chan) \
-+	dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
-+#define clear_channel_bit(dmac, reg, chan) \
-+	dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
-+
-+static int dmac_alloc_channel(struct dma_controller *_dmac)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&dmac->lock, flags);
-+	for (i = 0; i < DMAC_NR_CHANNELS; i++)
-+		if (dmac->channel[i].state == CH_STATE_FREE)
-+			break;
-+
-+	if (i < DMAC_NR_CHANNELS) {
-+		chan = &dmac->channel[i];
-+		chan->state = CH_STATE_ALLOCATED;
-+	} else {
-+		i = -EBUSY;
-+	}
-+
-+	spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+	return i;
-+}
-+
-+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS
-+	       || dmac->channel[channel].state != CH_STATE_ALLOCATED);
-+
-+	dmac->channel[channel].state = CH_STATE_FREE;
-+}
-+
-+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
-+					    unsigned int nr_blocks)
-+{
-+	struct dw_dma_block *block;
-+	void *p;
-+	unsigned int i;
-+
-+	block = kmalloc(nr_blocks * sizeof(*block),
-+			GFP_KERNEL);
-+	if (unlikely(!block))
-+		return NULL;
-+
-+	for (i = 0; i < nr_blocks; i++) {
-+		p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
-+				   &block[i].lli_dma_addr);
-+		block[i].lli_vaddr = p;
-+		if (unlikely(!p))
-+			goto fail;
-+	}
-+
-+	return block;
-+
-+fail:
-+	for (i = 0; i < nr_blocks; i++) {
-+		if (!block[i].lli_vaddr)
-+			break;
-+		dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
-+			      block[i].lli_dma_addr);
-+	}
-+	kfree(block);
-+	return NULL;
-+}
-+
-+static void cleanup_channel(struct dw_dma_controller *dmac,
-+			    struct dw_dma_channel *chan)
-+{
-+	unsigned int i;
-+
-+	if (chan->nr_blocks > 1) {
-+		for (i = 0; i < chan->nr_blocks; i++)
-+			dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
-+				      chan->block[i].lli_dma_addr);
-+		kfree(chan->block);
-+	}
-+
-+	chan->state = CH_STATE_ALLOCATED;
-+}
-+
-+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
-+				   struct dma_request_sg *req)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+	unsigned long ctlhi, ctllo, cfghi, cfglo;
-+	unsigned long block_size;
-+	unsigned int nr_blocks;
-+	int ret, i, direction;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&dmac->lock, flags);
-+
-+	ret = -EINVAL;
-+	if (req->req.channel >= DMAC_NR_CHANNELS
-+	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+	    || req->block_size > DMAC_MAX_BLOCKSIZE) {
-+		spin_unlock_irqrestore(&dmac->lock, flags);
-+		return -EINVAL;
-+	}
-+
-+	chan = &dmac->channel[req->req.channel];
-+	chan->state = CH_STATE_BUSY;
-+	chan->req_sg = req;
-+	chan->is_cyclic = 0;
-+
-+	/*
-+	 * We have marked the channel as busy, so no need to keep the
-+	 * lock as long as we only touch the channel-specific
-+	 * registers
-+	 */
-+	spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+	/*
-+	 * There may be limitations in the driver and/or the DMA
-+	 * controller that prevents us from sending a whole
-+	 * scatterlist item in one go.  Taking this into account,
-+	 * calculate the number of block transfers we need to set up.
-+	 *
-+	 * FIXME: Let the peripheral driver know about the maximum
-+	 * block size we support. We really don't want to use a
-+	 * different block size than what was suggested by the
-+	 * peripheral.
-+	 *
-+	 * Each block will get its own Linked List Item (LLI) below.
-+	 */
-+	block_size = req->block_size;
-+	nr_blocks = req->nr_blocks;
-+	pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
-+		 block_size, nr_blocks, req->nr_sg);
-+
-+	BUG_ON(nr_blocks == 0);
-+	chan->nr_blocks = nr_blocks;
-+
-+	ret = -EINVAL;
-+	cfglo = cfghi = 0;
-+	switch (req->direction) {
-+	case DMA_DIR_MEM_TO_PERIPH:
-+		direction = DMA_TO_DEVICE;
-+		cfghi = req->periph_id << (43 - 32);
-+		break;
-+
-+	case DMA_DIR_PERIPH_TO_MEM:
-+		direction = DMA_FROM_DEVICE;
-+		cfghi = req->periph_id << (39 - 32);
-+		break;
-+	default:
-+		goto out_unclaim_channel;
-+	}
-+
-+        chan->direction = direction;
-+
-+	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+	ctlhi = block_size >> req->width;
-+	ctllo = ((req->direction << 20)
-+		 // | (1 << 14) | (1 << 11) // source/dest burst trans len
-+		 | (req->width << 4) | (req->width << 1)
-+		 | (1 << 0));		 // interrupt enable
-+
-+	if (nr_blocks == 1) {
-+		/* Only one block: No need to use block chaining */
-+		if (direction == DMA_TO_DEVICE) {
-+			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+					    req->sg->dma_address);
-+			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+					    req->data_reg);
-+			ctllo |= 2 << 7; // no dst increment
-+		} else {
-+			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+					    req->data_reg);
-+			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+					    req->sg->dma_address);
-+			ctllo |= 2 << 9; // no src increment
-+		}
-+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
-+		dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
-+		pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
-+	} else {
-+		struct dw_dma_lli *lli, *lli_prev = NULL;
-+		int j = 0, offset = 0;
-+
-+		ret = -ENOMEM;
-+		chan->block = allocate_blocks(dmac, nr_blocks);
-+		if (!chan->block)
-+			goto out_unclaim_channel;
-+
-+		if (direction == DMA_TO_DEVICE)
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+		else
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+		/*
-+		 * Map scatterlist items to blocks. One scatterlist
-+		 * item may need more than one block for the reasons
-+		 * mentioned above.
-+		 */
-+		for (i = 0; i < nr_blocks; i++) {
-+			lli = chan->block[i].lli_vaddr;
-+			if (lli_prev) {
-+				lli_prev->llp = chan->block[i].lli_dma_addr;
-+				pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+					 i - 1, chan->block[i - 1].lli_vaddr,
-+					 chan->block[i - 1].lli_dma_addr,
-+					 lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+					 lli_prev->ctllo, lli_prev->ctlhi);
-+			}
-+			lli->llp = 0;
-+			lli->ctllo = ctllo;
-+			lli->ctlhi = ctlhi;
-+			if (direction == DMA_TO_DEVICE) {
-+				lli->sar = req->sg[j].dma_address + offset;
-+				lli->dar = req->data_reg;
-+			} else {
-+				lli->sar = req->data_reg;
-+				lli->dar = req->sg[j].dma_address + offset;
-+			}
-+			lli_prev = lli;
-+
-+			offset += block_size;
-+			if (offset > req->sg[j].length) {
-+				j++;
-+				offset = 0;
-+			}
-+		}
-+
-+		pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+			 i - 1, chan->block[i - 1].lli_vaddr,
-+			 chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+			 lli_prev->dar, lli_prev->llp,
-+			 lli_prev->ctllo, lli_prev->ctlhi);
-+
-+		/*
-+		 * SAR, DAR and CTL are initialized from the LLI. We
-+		 * only have to enable the LLI bits in CTL.
-+		 */
-+		dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
-+		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+				    chan->block[0].lli_dma_addr);
-+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+	}
-+
-+	set_channel_bit(dmac, MASK_XFER, req->req.channel);
-+	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+	if (req->req.block_complete)
-+		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+	else
-+		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+	return 0;
-+
-+out_unclaim_channel:
-+	chan->state = CH_STATE_ALLOCATED;
-+	return ret;
-+}
-+
-+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
-+                                       struct dma_request_cyclic *req)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+	unsigned long ctlhi, ctllo, cfghi, cfglo;
-+	unsigned long block_size;
-+	int ret, i, direction;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&dmac->lock, flags);
-+
-+        block_size = (req->buffer_size/req->periods) >> req->width;
-+
-+	ret = -EINVAL;
-+	if (req->req.channel >= DMAC_NR_CHANNELS
-+	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+            || (req->periods == 0)
-+	    || block_size > DMAC_MAX_BLOCKSIZE) {
-+		spin_unlock_irqrestore(&dmac->lock, flags);
-+		return -EINVAL;
-+	}
-+
-+	chan = &dmac->channel[req->req.channel];
-+	chan->state = CH_STATE_BUSY;
-+	chan->is_cyclic = 1;
-+        chan->req_cyclic = req;
-+
-+	/*
-+	 * We have marked the channel as busy, so no need to keep the
-+	 * lock as long as we only touch the channel-specific
-+	 * registers
-+	 */
-+	spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+	/*
-+          Setup
-+	 */
-+	BUG_ON(req->buffer_size % req->periods);
-+	/* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
-+
-+	chan->nr_blocks = req->periods;
-+
-+	ret = -EINVAL;
-+	cfglo = cfghi = 0;
-+	switch (req->direction) {
-+	case DMA_DIR_MEM_TO_PERIPH:
-+		direction = DMA_TO_DEVICE;
-+		cfghi = req->periph_id << (43 - 32);
-+		break;
-+
-+	case DMA_DIR_PERIPH_TO_MEM:
-+		direction = DMA_FROM_DEVICE;
-+		cfghi = req->periph_id << (39 - 32);
-+		break;
-+	default:
-+		goto out_unclaim_channel;
-+	}
-+
-+        chan->direction = direction;
-+
-+	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+	ctlhi = block_size;
-+	ctllo = ((req->direction << 20)
-+		 | (req->width << 4) | (req->width << 1)
-+		 | (1 << 0));		 // interrupt enable
-+
-+        {
-+		struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
-+
-+		ret = -ENOMEM;
-+		chan->block = allocate_blocks(dmac, req->periods);
-+		if (!chan->block)
-+			goto out_unclaim_channel;
-+
-+		if (direction == DMA_TO_DEVICE)
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+		else
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+		/*
-+		 * Set up a linked list items where each period gets
-+		 * an item. The linked list item for the last period
-+		 * points back to the star of the buffer making a
-+		 * cyclic buffer.
-+		 */
-+		for (i = 0; i < req->periods; i++) {
-+			lli = chan->block[i].lli_vaddr;
-+			if (lli_prev) {
-+				lli_prev->llp = chan->block[i].lli_dma_addr;
-+				/* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+				   i - 1, chan->block[i - 1].lli_vaddr,
-+				   chan->block[i - 1].lli_dma_addr,
-+				   lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+				   lli_prev->ctllo, lli_prev->ctlhi);*/
-+			}
-+			lli->llp = 0;
-+			lli->ctllo = ctllo;
-+			lli->ctlhi = ctlhi;
-+			if (direction == DMA_TO_DEVICE) {
-+				lli->sar = req->buffer_start + i*(block_size << req->width);
-+				lli->dar = req->data_reg;
-+			} else {
-+				lli->sar = req->data_reg;
-+				lli->dar = req->buffer_start + i*(block_size << req->width);
-+			}
-+			lli_prev = lli;
-+		}
-+		lli->llp = chan->block[0].lli_dma_addr;
-+
-+		/*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+		  i - 1, chan->block[i - 1].lli_vaddr,
-+		  chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+		  lli_prev->dar, lli_prev->llp,
-+		  lli_prev->ctllo, lli_prev->ctlhi); */
-+
-+		/*
-+		 * SAR, DAR and CTL are initialized from the LLI. We
-+		 * only have to enable the LLI bits in CTL.
-+		 */
-+		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+				    chan->block[0].lli_dma_addr);
-+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+	}
-+
-+	clear_channel_bit(dmac, MASK_XFER, req->req.channel);
-+	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+	if (req->req.block_complete)
-+		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+	else
-+		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+	return 0;
-+
-+out_unclaim_channel:
-+	chan->state = CH_STATE_ALLOCATED;
-+	return ret;
-+}
-+
-+static int dmac_start_request(struct dma_controller *_dmac,
-+			      unsigned int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+	set_channel_bit(dmac, CH_EN, channel);
-+
-+	return 0;
-+}
-+
-+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
-+                                       unsigned int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+        dma_addr_t current_pos;
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+        chan = &dmac->channel[channel];
-+
-+	switch (chan->direction) {
-+	case DMA_TO_DEVICE:
-+		current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
-+		break;
-+	case DMA_FROM_DEVICE:
-+		current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
-+		break;
-+	default:
-+		return 0;
-+	}
-+
-+
-+        if (!current_pos) {
-+		if (chan->is_cyclic) {
-+			current_pos = chan->req_cyclic->buffer_start;
-+		} else {
-+			current_pos = chan->req_sg->sg->dma_address;
-+		}
-+	}
-+
-+	return current_pos;
-+}
-+
-+
-+static int dmac_stop_request(struct dma_controller *_dmac,
-+                             unsigned int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+	chan = &dmac->channel[channel];
-+	pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
-+		 chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
-+		 dmac_chan_readl_lo(dmac, channel, DAR),
-+		 dmac_chan_readl_lo(dmac, channel, LLP),
-+		 dmac_chan_readl_hi(dmac, channel, CTL),
-+		 dmac_chan_readl_lo(dmac, channel, CTL));
-+
-+	if (chan->state == CH_STATE_BUSY) {
-+		clear_channel_bit(dmac, CH_EN, channel);
-+		cleanup_channel(dmac, &dmac->channel[channel]);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static void dmac_block_complete(struct dw_dma_controller *dmac)
-+{
-+	struct dw_dma_channel *chan;
-+	unsigned long status, chanid;
-+
-+	status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+
-+	while (status) {
-+		struct dma_request *req;
-+		chanid = __ffs(status);
-+		chan = &dmac->channel[chanid];
-+
-+                if (chan->is_cyclic) {
-+			BUG_ON(!chan->req_cyclic
-+			       || !chan->req_cyclic->req.block_complete);
-+			req = &chan->req_cyclic->req;
-+                } else {
-+			BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
-+			req = &chan->req_sg->req;
-+                }
-+		dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
-+		req->block_complete(req);
-+		status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+	}
-+}
-+
-+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
-+{
-+	struct dw_dma_channel *chan;
-+	struct dma_request *req;
-+	unsigned long status, chanid;
-+
-+	status = dmac_readl_lo(dmac, STATUS_XFER);
-+
-+	while (status) {
-+		chanid = __ffs(status);
-+		chan = &dmac->channel[chanid];
-+
-+		dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
-+
-+                req = &chan->req_sg->req;
-+                BUG_ON(!req);
-+                cleanup_channel(dmac, chan);
-+                if (req->xfer_complete)
-+			req->xfer_complete(req);
-+
-+		status = dmac_readl_lo(dmac, STATUS_XFER);
-+	}
-+}
-+
-+static void dmac_error(struct dw_dma_controller *dmac)
-+{
-+	struct dw_dma_channel *chan;
-+	unsigned long status, chanid;
-+
-+	status = dmac_readl_lo(dmac, STATUS_ERROR);
-+
-+	while (status) {
-+		struct dma_request *req;
-+
-+		chanid = __ffs(status);
-+		chan = &dmac->channel[chanid];
-+
-+		dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
-+		clear_channel_bit(dmac, CH_EN, chanid);
-+
-+                if (chan->is_cyclic) {
-+			BUG_ON(!chan->req_cyclic);
-+			req = &chan->req_cyclic->req;
-+                } else {
-+			BUG_ON(!chan->req_sg);
-+			req = &chan->req_sg->req;
-+                }
-+
-+		cleanup_channel(dmac, chan);
-+		if (req->error)
-+			req->error(req);
-+
-+		status = dmac_readl_lo(dmac, STATUS_XFER);
-+	}
-+}
-+
-+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
-+{
-+	struct dw_dma_controller *dmac = dev_id;
-+	unsigned long status;
-+	int ret = IRQ_NONE;
-+
-+	spin_lock(&dmac->lock);
-+
-+	status = dmac_readl_lo(dmac, STATUS_INT);
-+
-+	while (status) {
-+		ret = IRQ_HANDLED;
-+		if (status & 0x10)
-+			dmac_error(dmac);
-+		if (status & 0x02)
-+			dmac_block_complete(dmac);
-+		if (status & 0x01)
-+			dmac_xfer_complete(dmac);
-+
-+		status = dmac_readl_lo(dmac, STATUS_INT);
-+	}
-+
-+	spin_unlock(&dmac->lock);
-+	return ret;
-+}
-+
-+static int __devinit dmac_probe(struct platform_device *pdev)
-+{
-+	struct dw_dma_controller *dmac;
-+	struct resource *regs;
-+	int ret;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+
-+	dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
-+	if (!dmac)
-+		return -ENOMEM;
-+	memset(dmac, 0, sizeof(*dmac));
-+
-+	dmac->hclk = clk_get(&pdev->dev, "hclk");
-+	if (IS_ERR(dmac->hclk)) {
-+		ret = PTR_ERR(dmac->hclk);
-+		goto out_free_dmac;
-+	}
-+	clk_enable(dmac->hclk);
-+
-+	ret = -ENOMEM;
-+	dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
-+					 sizeof(struct dw_dma_lli), 4, 0);
-+	if (!dmac->lli_pool)
-+		goto out_disable_clk;
-+
-+	spin_lock_init(&dmac->lock);
-+	dmac->dma.dev = &pdev->dev;
-+	dmac->dma.alloc_channel = dmac_alloc_channel;
-+	dmac->dma.release_channel = dmac_release_channel;
-+	dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
-+	dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
-+	dmac->dma.start_request = dmac_start_request;
-+	dmac->dma.stop_request = dmac_stop_request;
-+	dmac->dma.get_current_pos = dmac_get_current_pos;
-+
-+	dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!dmac->regs)
-+		goto out_free_pool;
-+
-+	ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+			  SA_SAMPLE_RANDOM, pdev->name, dmac);
-+	if (ret)
-+		goto out_unmap_regs;
-+
-+	/* Enable the DMA controller */
-+	dmac_writel_lo(dmac, CFG, 1);
-+
-+	register_dma_controller(&dmac->dma);
-+
-+	printk(KERN_INFO
-+	       "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
-+	       dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
-+
-+	return 0;
-+
-+out_unmap_regs:
-+	iounmap(dmac->regs);
-+out_free_pool:
-+	dma_pool_destroy(dmac->lli_pool);
-+out_disable_clk:
-+	clk_disable(dmac->hclk);
-+	clk_put(dmac->hclk);
-+out_free_dmac:
-+	kfree(dmac);
-+	return ret;
-+}
-+
-+static struct platform_driver dmac_driver = {
-+	.probe		= dmac_probe,
-+	.driver		= {
-+		.name		= "dmaca",
-+	},
-+};
-+
-+static int __init dmac_init(void)
-+{
-+	return platform_driver_register(&dmac_driver);
-+}
-+subsys_initcall(dmac_init);
-+
-+static void __exit dmac_exit(void)
-+{
-+	platform_driver_unregister(&dmac_driver);
-+}
-+module_exit(dmac_exit);
-+
-+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
-new file mode 100644
-index 0000000..1f67921
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
-+
-+#define DW_DMAC_CFG		0x398
-+#define DW_DMAC_CH_EN		0x3a0
-+
-+#define DW_DMAC_STATUS_XFER	0x2e8
-+#define DW_DMAC_STATUS_BLOCK	0x2f0
-+#define DW_DMAC_STATUS_ERROR	0x308
-+
-+#define DW_DMAC_MASK_XFER	0x310
-+#define DW_DMAC_MASK_BLOCK	0x318
-+#define DW_DMAC_MASK_ERROR	0x330
-+
-+#define DW_DMAC_CLEAR_XFER	0x338
-+#define DW_DMAC_CLEAR_BLOCK	0x340
-+#define DW_DMAC_CLEAR_ERROR	0x358
-+
-+#define DW_DMAC_STATUS_INT	0x360
-+
-+#define DW_DMAC_CHAN_SAR	0x000
-+#define DW_DMAC_CHAN_DAR	0x008
-+#define DW_DMAC_CHAN_LLP	0x010
-+#define DW_DMAC_CHAN_CTL	0x018
-+#define DW_DMAC_CHAN_SSTAT	0x020
-+#define DW_DMAC_CHAN_DSTAT	0x028
-+#define DW_DMAC_CHAN_SSTATAR	0x030
-+#define DW_DMAC_CHAN_DSTATAR	0x038
-+#define DW_DMAC_CHAN_CFG	0x040
-+#define DW_DMAC_CHAN_SGR	0x048
-+#define DW_DMAC_CHAN_DSR	0x050
-+
-+#endif /* __AVR32_DW_DMAC_H__ */
-diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
-index 90e5aff..b6afc0c 100644
---- a/arch/avr32/kernel/Makefile
-+++ b/arch/avr32/kernel/Makefile
-@@ -9,6 +9,7 @@ obj-y				+= syscall_table.o syscall-stubs.o irq.o
- obj-y				+= setup.o traps.o semaphore.o ptrace.o
- obj-y				+= signal.o sys_avr32.o process.o time.o
- obj-y				+= init_task.o switch_to.o cpu.o
-+obj-y				+= dma-controller.o
- obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES)		+= kprobes.o
- 
-diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
-index 2e72fd2..2714cf6 100644
---- a/arch/avr32/kernel/cpu.c
-+++ b/arch/avr32/kernel/cpu.c
-@@ -209,16 +209,17 @@ static const char *mmu_types[] = {
- void __init setup_processor(void)
- {
- 	unsigned long config0, config1;
-+	unsigned long features;
- 	unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
- 	unsigned tmp;
- 
--	config0 = sysreg_read(CONFIG0); /* 0x0000013e; */
--	config1 = sysreg_read(CONFIG1); /* 0x01f689a2; */
--	cpu_id = config0 >> 24;
--	cpu_rev = (config0 >> 16) & 0xff;
--	arch_id = (config0 >> 13) & 0x07;
--	arch_rev = (config0 >> 10) & 0x07;
--	mmu_type = (config0 >> 7) & 0x03;
-+	config0 = sysreg_read(CONFIG0);
-+	config1 = sysreg_read(CONFIG1);
-+	cpu_id = SYSREG_BFEXT(PROCESSORID, config0);
-+	cpu_rev = SYSREG_BFEXT(PROCESSORREVISION, config0);
-+	arch_id = SYSREG_BFEXT(AT, config0);
-+	arch_rev = SYSREG_BFEXT(AR, config0);
-+	mmu_type = SYSREG_BFEXT(MMUT, config0);
- 
- 	boot_cpu_data.arch_type = arch_id;
- 	boot_cpu_data.cpu_type = cpu_id;
-@@ -226,16 +227,16 @@ void __init setup_processor(void)
- 	boot_cpu_data.cpu_revision = cpu_rev;
- 	boot_cpu_data.tlb_config = mmu_type;
- 
--	tmp = (config1 >> 13) & 0x07;
-+	tmp = SYSREG_BFEXT(ILSZ, config1);
- 	if (tmp) {
--		boot_cpu_data.icache.ways = 1 << ((config1 >> 10) & 0x07);
--		boot_cpu_data.icache.sets = 1 << ((config1 >> 16) & 0x0f);
-+		boot_cpu_data.icache.ways = 1 << SYSREG_BFEXT(IASS, config1);
-+		boot_cpu_data.icache.sets = 1 << SYSREG_BFEXT(ISET, config1);
- 		boot_cpu_data.icache.linesz = 1 << (tmp + 1);
- 	}
--	tmp = (config1 >> 3) & 0x07;
-+	tmp = SYSREG_BFEXT(DLSZ, config1);
- 	if (tmp) {
--		boot_cpu_data.dcache.ways = 1 << (config1 & 0x07);
--		boot_cpu_data.dcache.sets = 1 << ((config1 >> 6) & 0x0f);
-+		boot_cpu_data.dcache.ways = 1 << SYSREG_BFEXT(DASS, config1);
-+		boot_cpu_data.dcache.sets = 1 << SYSREG_BFEXT(DSET, config1);
- 		boot_cpu_data.dcache.linesz = 1 << (tmp + 1);
- 	}
- 
-@@ -250,16 +251,39 @@ void __init setup_processor(void)
- 		cpu_names[cpu_id], cpu_id, cpu_rev,
- 		arch_names[arch_id], arch_rev);
- 	printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
-+
- 	printk ("CPU: features:");
--	if (config0 & (1 << 6))
--		printk(" fpu");
--	if (config0 & (1 << 5))
--		printk(" java");
--	if (config0 & (1 << 4))
--		printk(" perfctr");
--	if (config0 & (1 << 3))
-+	features = 0;
-+	if (config0 & SYSREG_BIT(CONFIG0_R)) {
-+		features |= AVR32_FEATURE_RMW;
-+		printk(" rmw");
-+	}
-+	if (config0 & SYSREG_BIT(CONFIG0_D)) {
-+		features |= AVR32_FEATURE_DSP;
-+		printk(" dsp");
-+	}
-+	if (config0 & SYSREG_BIT(CONFIG0_S)) {
-+		features |= AVR32_FEATURE_SIMD;
-+		printk(" simd");
-+	}
-+	if (config0 & SYSREG_BIT(CONFIG0_O)) {
-+		features |= AVR32_FEATURE_OCD;
- 		printk(" ocd");
-+	}
-+	if (config0 & SYSREG_BIT(CONFIG0_P)) {
-+		features |= AVR32_FEATURE_PCTR;
-+		printk(" perfctr");
-+	}
-+	if (config0 & SYSREG_BIT(CONFIG0_J)) {
-+		features |= AVR32_FEATURE_JAVA;
-+		printk(" java");
-+	}
-+	if (config0 & SYSREG_BIT(CONFIG0_F)) {
-+		features |= AVR32_FEATURE_FPU;
-+		printk(" fpu");
-+	}
- 	printk("\n");
-+	boot_cpu_data.features = features;
- }
- 
- #ifdef CONFIG_PROC_FS
-diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
-new file mode 100644
-index 0000000..fb654b3
---- /dev/null
-+++ b/arch/avr32/kernel/dma-controller.c
-@@ -0,0 +1,34 @@
-+/*
-+ * Preliminary DMA controller framework for AVR32
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/dma-controller.h>
-+
-+static LIST_HEAD(controllers);
-+
-+int register_dma_controller(struct dma_controller *dmac)
-+{
-+	static int next_id;
-+
-+	dmac->id = next_id++;
-+	list_add_tail(&dmac->list, &controllers);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(register_dma_controller);
-+
-+struct dma_controller *find_dma_controller(int id)
-+{
-+	struct dma_controller *dmac;
-+
-+	list_for_each_entry(dmac, &controllers, list)
-+		if (dmac->id == id)
-+			return dmac;
-+	return NULL;
-+}
-+EXPORT_SYMBOL(find_dma_controller);
-diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
-index eeb6679..42657f1 100644
---- a/arch/avr32/kernel/entry-avr32b.S
-+++ b/arch/avr32/kernel/entry-avr32b.S
-@@ -100,55 +100,49 @@ dtlb_miss_write:
- 
- 	.global	tlb_miss_common
- tlb_miss_common:
--	mfsr	r0, SYSREG_PTBR
--	mfsr	r1, SYSREG_TLBEAR
-+	mfsr	r0, SYSREG_TLBEAR
-+	mfsr	r1, SYSREG_PTBR
- 
- 	/* Is it the vmalloc space? */
--	bld	r1, 31
-+	bld	r0, 31
- 	brcs	handle_vmalloc_miss
- 
- 	/* First level lookup */
- pgtbl_lookup:
--	lsr	r2, r1, PGDIR_SHIFT
--	ld.w	r0, r0[r2 << 2]
--	bld	r0, _PAGE_BIT_PRESENT
-+	lsr	r2, r0, PGDIR_SHIFT
-+	ld.w	r3, r1[r2 << 2]
-+	bfextu	r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
-+	bld	r3, _PAGE_BIT_PRESENT
- 	brcc	page_table_not_present
- 
--	/* TODO: Check access rights on page table if necessary */
--
- 	/* Translate to virtual address in P1. */
--	andl	r0, 0xf000
--	sbr	r0, 31
-+	andl	r3, 0xf000
-+	sbr	r3, 31
- 
- 	/* Second level lookup */
--	lsl	r1, (32 - PGDIR_SHIFT)
--	lsr	r1, (32 - PGDIR_SHIFT) + PAGE_SHIFT
--	add	r2, r0, r1 << 2
--	ld.w	r1, r2[0]
--	bld	r1, _PAGE_BIT_PRESENT
-+	ld.w	r2, r3[r1 << 2]
-+	mfsr	r0, SYSREG_TLBARLO
-+	bld	r2, _PAGE_BIT_PRESENT
- 	brcc	page_not_present
- 
- 	/* Mark the page as accessed */
--	sbr	r1, _PAGE_BIT_ACCESSED
--	st.w	r2[0], r1
-+	sbr	r2, _PAGE_BIT_ACCESSED
-+	st.w	r3[r1 << 2], r2
- 
- 	/* Drop software flags */
--	andl	r1, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
--	mtsr	SYSREG_TLBELO, r1
-+	andl	r2, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
-+	mtsr	SYSREG_TLBELO, r2
- 
- 	/* Figure out which entry we want to replace */
--	mfsr	r0, SYSREG_TLBARLO
-+	mfsr	r1, SYSREG_MMUCR
- 	clz	r2, r0
- 	brcc	1f
--	mov	r1, -1			/* All entries have been accessed, */
--	mtsr	SYSREG_TLBARLO, r1	/* so reset TLBAR */
--	mov	r2, 0			/* and start at 0 */
--1:	mfsr	r1, SYSREG_MMUCR
--	lsl	r2, 14
--	andl	r1, 0x3fff, COH
--	or	r1, r2
--	mtsr	SYSREG_MMUCR, r1
-+	mov	r3, -1			/* All entries have been accessed, */
-+	mov	r2, 0			/* so start at 0 */
-+	mtsr	SYSREG_TLBARLO, r3	/* and reset TLBAR */
- 
-+1:	bfins	r1, r2, SYSREG_DRP_OFFSET, SYSREG_DRP_SIZE
-+	mtsr	SYSREG_MMUCR, r1
- 	tlbw
- 
- 	tlbmiss_restore
-@@ -156,8 +150,8 @@ pgtbl_lookup:
- 
- handle_vmalloc_miss:
- 	/* Simply do the lookup in init's page table */
--	mov	r0, lo(swapper_pg_dir)
--	orh	r0, hi(swapper_pg_dir)
-+	mov	r1, lo(swapper_pg_dir)
-+	orh	r1, hi(swapper_pg_dir)
- 	rjmp	pgtbl_lookup
- 
- 
-@@ -340,12 +334,34 @@ do_bus_error_read:
- do_nmi_ll:
- 	sub	sp, 4
- 	stmts	--sp, r0-lr
--	/* FIXME: Make sure RAR_NMI and RSR_NMI are pushed instead of *_EX */
--	rcall	save_full_context_ex
-+	mfsr	r9, SYSREG_RSR_NMI
-+	mfsr	r8, SYSREG_RAR_NMI
-+	bfextu	r0, r9, MODE_SHIFT, 3
-+	brne	2f
-+
-+1:	pushm	r8, r9	/* PC and SR */
- 	mfsr	r12, SYSREG_ECR
- 	mov	r11, sp
- 	rcall	do_nmi
--	rjmp	bad_return
-+	popm	r8-r9
-+	mtsr	SYSREG_RAR_NMI, r8
-+	tst	r0, r0
-+	mtsr	SYSREG_RSR_NMI, r9
-+	brne	3f
-+
-+	ldmts	sp++, r0-lr
-+	sub	sp, -4		/* skip r12_orig */
-+	rete
-+
-+2:	sub	r10, sp, -(FRAME_SIZE_FULL - REG_LR)
-+	stdsp	sp[4], r10	/* replace saved SP */
-+	rjmp	1b
-+
-+3:	popm	lr
-+	sub	sp, -4		/* skip sp */
-+	popm	r0-r12
-+	sub	sp, -4		/* skip r12_orig */
-+	rete
- 
- handle_address_fault:
- 	sub	sp, 4
-@@ -630,9 +646,12 @@ irq_level\level:
- 	rcall	do_IRQ
- 
- 	lddsp	r4, sp[REG_SR]
--	andh	r4, (MODE_MASK >> 16), COH
-+	bfextu	r4, r4, SYSREG_M0_OFFSET, 3
-+	cp.w	r4, MODE_SUPERVISOR >> SYSREG_M0_OFFSET
-+	breq	2f
-+	cp.w	r4, MODE_USER >> SYSREG_M0_OFFSET
- #ifdef CONFIG_PREEMPT
--	brne	2f
-+	brne	3f
- #else
- 	brne	1f
- #endif
-@@ -649,9 +668,18 @@ irq_level\level:
- 	sub	sp, -4		/* ignore r12_orig */
- 	rete
- 
-+2:	get_thread_info	r0
-+	ld.w	r1, r0[TI_flags]
-+	bld	r1, TIF_CPU_GOING_TO_SLEEP
- #ifdef CONFIG_PREEMPT
--2:
--	get_thread_info	r0
-+	brcc	3f
-+#else
-+	brcc	1b
-+#endif
-+	sub	r1, pc, . - cpu_idle_skip_sleep
-+	stdsp	sp[REG_PC], r1
-+#ifdef CONFIG_PREEMPT
-+3:	get_thread_info r0
- 	ld.w	r2, r0[TI_preempt_count]
- 	cp.w	r2, 0
- 	brne	1b
-@@ -662,12 +690,32 @@ irq_level\level:
- 	bld	r4, SYSREG_GM_OFFSET
- 	brcs	1b
- 	rcall	preempt_schedule_irq
--	rjmp	1b
- #endif
-+	rjmp	1b
- 	.endm
- 
- 	.section .irq.text,"ax",@progbits
- 
-+.global cpu_idle_sleep
-+cpu_idle_sleep:
-+	mask_interrupts
-+	get_thread_info r8
-+	ld.w	r9, r8[TI_flags]
-+	bld	r9, TIF_NEED_RESCHED
-+	brcs	cpu_idle_enable_int_and_exit
-+	sbr	r9, TIF_CPU_GOING_TO_SLEEP
-+	st.w	r8[TI_flags], r9
-+	unmask_interrupts
-+	sleep 0
-+cpu_idle_skip_sleep:
-+	mask_interrupts
-+	ld.w	r9, r8[TI_flags]
-+	cbr	r9, TIF_CPU_GOING_TO_SLEEP
-+	st.w	r8[TI_flags], r9
-+cpu_idle_enable_int_and_exit:
-+	unmask_interrupts
-+	retal	r12
-+
- 	.global	irq_level0
- 	.global	irq_level1
- 	.global	irq_level2
-diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c
-index fd31124..61f2de2 100644
---- a/arch/avr32/kernel/irq.c
-+++ b/arch/avr32/kernel/irq.c
-@@ -7,15 +7,6 @@
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License version 2 as
-  * published by the Free Software Foundation.
-- *
-- * This file contains the code used by various IRQ handling routines:
-- * asking for different IRQ's should be done through these routines
-- * instead of just grabbing them. Thus setups with different IRQ numbers
-- * shouldn't result in any weird surprises, and installing new handlers
-- * should be easier.
-- *
-- * IRQ's are in fact implemented a bit like signal handlers for the kernel.
-- * Naturally it's not a 1:1 relation, but there are similarities.
-  */
- 
- #include <linux/interrupt.h>
-diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c
-index d0abbca..037d7bd 100644
---- a/arch/avr32/kernel/kprobes.c
-+++ b/arch/avr32/kernel/kprobes.c
-@@ -179,7 +179,7 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
- 	return 1;
- }
- 
--static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
-+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
- {
- 	struct kprobe *cur = kprobe_running();
- 
-@@ -216,11 +216,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
- 		if (post_kprobe_handler(args->regs))
- 			ret = NOTIFY_STOP;
- 		break;
--	case DIE_FAULT:
--		if (kprobe_running()
--		    && kprobe_fault_handler(args->regs, args->trapnr))
--			ret = NOTIFY_STOP;
--		break;
- 	default:
- 		break;
- 	}
-diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
-index b599eae..1167fe9 100644
---- a/arch/avr32/kernel/module.c
-+++ b/arch/avr32/kernel/module.c
-@@ -12,10 +12,11 @@
-  * published by the Free Software Foundation.
-  */
- 
--#include <linux/moduleloader.h>
--#include <linux/module.h>
--#include <linux/kernel.h>
-+#include <linux/bug.h>
- #include <linux/elf.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleloader.h>
- #include <linux/vmalloc.h>
- 
- void *module_alloc(unsigned long size)
-@@ -315,10 +316,10 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
- 	vfree(module->arch.syminfo);
- 	module->arch.syminfo = NULL;
- 
--	return 0;
-+	return module_bug_finalize(hdr, sechdrs, module);
- }
- 
- void module_arch_cleanup(struct module *module)
- {
--
-+	module_bug_cleanup(module);
- }
-diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
-index 0b43259..4e4181e 100644
---- a/arch/avr32/kernel/process.c
-+++ b/arch/avr32/kernel/process.c
-@@ -11,6 +11,7 @@
- #include <linux/fs.h>
- #include <linux/ptrace.h>
- #include <linux/reboot.h>
-+#include <linux/uaccess.h>
- #include <linux/unistd.h>
- 
- #include <asm/sysreg.h>
-@@ -19,6 +20,8 @@
- void (*pm_power_off)(void) = NULL;
- EXPORT_SYMBOL(pm_power_off);
- 
-+extern void cpu_idle_sleep(void);
-+
- /*
-  * This file handles the architecture-dependent parts of process handling..
-  */
-@@ -27,9 +30,8 @@ void cpu_idle(void)
- {
- 	/* endless idle loop with no priority at all */
- 	while (1) {
--		/* TODO: Enter sleep mode */
- 		while (!need_resched())
--			cpu_relax();
-+			cpu_idle_sleep();
- 		preempt_enable_no_resched();
- 		schedule();
- 		preempt_disable();
-@@ -114,39 +116,178 @@ void release_thread(struct task_struct *dead_task)
- 	/* do nothing */
- }
- 
-+static void dump_mem(const char *str, const char *log_lvl,
-+		     unsigned long bottom, unsigned long top)
-+{
-+	unsigned long p;
-+	int i;
-+
-+	printk("%s%s(0x%08lx to 0x%08lx)\n", log_lvl, str, bottom, top);
-+
-+	for (p = bottom & ~31; p < top; ) {
-+		printk("%s%04lx: ", log_lvl, p & 0xffff);
-+
-+		for (i = 0; i < 8; i++, p += 4) {
-+			unsigned int val;
-+
-+			if (p < bottom || p >= top)
-+				printk("         ");
-+			else {
-+				if (__get_user(val, (unsigned int __user *)p)) {
-+					printk("\n");
-+					goto out;
-+				}
-+				printk("%08x ", val);
-+			}
-+		}
-+		printk("\n");
-+	}
-+
-+out:
-+	return;
-+}
-+
-+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
-+{
-+	return (p > (unsigned long)tinfo)
-+		&& (p < (unsigned long)tinfo + THREAD_SIZE - 3);
-+}
-+
-+#ifdef CONFIG_FRAME_POINTER
-+static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp,
-+			       struct pt_regs *regs, const char *log_lvl)
-+{
-+	unsigned long lr, fp;
-+	struct thread_info *tinfo;
-+
-+	if (regs)
-+		fp = regs->r7;
-+	else if (tsk == current)
-+		asm("mov %0, r7" : "=r"(fp));
-+	else
-+		fp = tsk->thread.cpu_context.r7;
-+
-+	/*
-+	 * Walk the stack as long as the frame pointer (a) is within
-+	 * the kernel stack of the task, and (b) it doesn't move
-+	 * downwards.
-+	 */
-+	tinfo = task_thread_info(tsk);
-+	printk("%sCall trace:\n", log_lvl);
-+	while (valid_stack_ptr(tinfo, fp)) {
-+		unsigned long new_fp;
-+
-+		lr = *(unsigned long *)fp;
-+#ifdef CONFIG_KALLSYMS
-+		printk("%s [<%08lx>] ", log_lvl, lr);
-+#else
-+		printk(" [<%08lx>] ", lr);
-+#endif
-+		print_symbol("%s\n", lr);
-+
-+		new_fp = *(unsigned long *)(fp + 4);
-+		if (new_fp <= fp)
-+			break;
-+		fp = new_fp;
-+	}
-+	printk("\n");
-+}
-+#else
-+static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp,
-+			       struct pt_regs *regs, const char *log_lvl)
-+{
-+	unsigned long addr;
-+
-+	printk("%sCall trace:\n", log_lvl);
-+
-+	while (!kstack_end(sp)) {
-+		addr = *sp++;
-+		if (kernel_text_address(addr)) {
-+#ifdef CONFIG_KALLSYMS
-+			printk("%s [<%08lx>] ", log_lvl, addr);
-+#else
-+			printk(" [<%08lx>] ", addr);
-+#endif
-+			print_symbol("%s\n", addr);
-+		}
-+	}
-+	printk("\n");
-+}
-+#endif
-+
-+void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
-+			struct pt_regs *regs, const char *log_lvl)
-+{
-+	struct thread_info *tinfo;
-+
-+	if (sp == 0) {
-+		if (tsk)
-+			sp = tsk->thread.cpu_context.ksp;
-+		else
-+			sp = (unsigned long)&tinfo;
-+	}
-+	if (!tsk)
-+		tsk = current;
-+
-+	tinfo = task_thread_info(tsk);
-+
-+	if (valid_stack_ptr(tinfo, sp)) {
-+		dump_mem("Stack: ", log_lvl, sp,
-+			 THREAD_SIZE + (unsigned long)tinfo);
-+		show_trace_log_lvl(tsk, (unsigned long *)sp, regs, log_lvl);
-+	}
-+}
-+
-+void show_stack(struct task_struct *tsk, unsigned long *stack)
-+{
-+	show_stack_log_lvl(tsk, (unsigned long)stack, NULL, "");
-+}
-+
-+void dump_stack(void)
-+{
-+	unsigned long stack;
-+
-+	show_trace_log_lvl(current, &stack, NULL, "");
-+}
-+EXPORT_SYMBOL(dump_stack);
-+
- static const char *cpu_modes[] = {
- 	"Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
- 	"Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
- };
- 
--void show_regs(struct pt_regs *regs)
-+void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl)
- {
- 	unsigned long sp = regs->sp;
- 	unsigned long lr = regs->lr;
- 	unsigned long mode = (regs->sr & MODE_MASK) >> MODE_SHIFT;
- 
--	if (!user_mode(regs))
-+	if (!user_mode(regs)) {
- 		sp = (unsigned long)regs + FRAME_SIZE_FULL;
- 
--	print_symbol("PC is at %s\n", instruction_pointer(regs));
--	print_symbol("LR is at %s\n", lr);
--	printk("pc : [<%08lx>]    lr : [<%08lx>]    %s\n"
--	       "sp : %08lx  r12: %08lx  r11: %08lx\n",
--	       instruction_pointer(regs),
--	       lr, print_tainted(), sp, regs->r12, regs->r11);
--	printk("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
--	       regs->r10, regs->r9, regs->r8);
--	printk("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
--	       regs->r7, regs->r6, regs->r5, regs->r4);
--	printk("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
--	       regs->r3, regs->r2, regs->r1, regs->r0);
--	printk("Flags: %c%c%c%c%c\n",
-+		printk("%s", log_lvl);
-+		print_symbol("PC is at %s\n", instruction_pointer(regs));
-+		printk("%s", log_lvl);
-+		print_symbol("LR is at %s\n", lr);
-+	}
-+
-+	printk("%spc : [<%08lx>]    lr : [<%08lx>]    %s\n"
-+	       "%ssp : %08lx  r12: %08lx  r11: %08lx\n",
-+	       log_lvl, instruction_pointer(regs), lr, print_tainted(),
-+	       log_lvl, sp, regs->r12, regs->r11);
-+	printk("%sr10: %08lx  r9 : %08lx  r8 : %08lx\n",
-+	       log_lvl, regs->r10, regs->r9, regs->r8);
-+	printk("%sr7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
-+	       log_lvl, regs->r7, regs->r6, regs->r5, regs->r4);
-+	printk("%sr3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
-+	       log_lvl, regs->r3, regs->r2, regs->r1, regs->r0);
-+	printk("%sFlags: %c%c%c%c%c\n", log_lvl,
- 	       regs->sr & SR_Q ? 'Q' : 'q',
- 	       regs->sr & SR_V ? 'V' : 'v',
- 	       regs->sr & SR_N ? 'N' : 'n',
- 	       regs->sr & SR_Z ? 'Z' : 'z',
- 	       regs->sr & SR_C ? 'C' : 'c');
--	printk("Mode bits: %c%c%c%c%c%c%c%c%c\n",
-+	printk("%sMode bits: %c%c%c%c%c%c%c%c%c\n", log_lvl,
- 	       regs->sr & SR_H ? 'H' : 'h',
- 	       regs->sr & SR_R ? 'R' : 'r',
- 	       regs->sr & SR_J ? 'J' : 'j',
-@@ -156,9 +297,21 @@ void show_regs(struct pt_regs *regs)
- 	       regs->sr & SR_I1M ? '1' : '.',
- 	       regs->sr & SR_I0M ? '0' : '.',
- 	       regs->sr & SR_GM ? 'G' : 'g');
--	printk("CPU Mode: %s\n", cpu_modes[mode]);
-+	printk("%sCPU Mode: %s\n", log_lvl, cpu_modes[mode]);
-+	printk("%sProcess: %s [%d] (task: %p thread: %p)\n",
-+	       log_lvl, current->comm, current->pid, current,
-+	       task_thread_info(current));
-+}
-+
-+void show_regs(struct pt_regs *regs)
-+{
-+	unsigned long sp = regs->sp;
-+
-+	if (!user_mode(regs))
-+		sp = (unsigned long)regs + FRAME_SIZE_FULL;
- 
--	show_trace(NULL, (unsigned long *)sp, regs);
-+	show_regs_log_lvl(regs, "");
-+	show_trace_log_lvl(current, (unsigned long *)sp, regs, "");
- }
- EXPORT_SYMBOL(show_regs);
- 
-diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
-index a1a7c3c..b279d66 100644
---- a/arch/avr32/kernel/setup.c
-+++ b/arch/avr32/kernel/setup.c
-@@ -8,12 +8,14 @@
- 
- #include <linux/clk.h>
- #include <linux/init.h>
-+#include <linux/initrd.h>
- #include <linux/sched.h>
- #include <linux/console.h>
- #include <linux/ioport.h>
- #include <linux/bootmem.h>
- #include <linux/fs.h>
- #include <linux/module.h>
-+#include <linux/pfn.h>
- #include <linux/root_dev.h>
- #include <linux/cpu.h>
- #include <linux/kernel.h>
-@@ -30,13 +32,6 @@
- extern int root_mountflags;
- 
- /*
-- * Bootloader-provided information about physical memory
-- */
--struct tag_mem_range *mem_phys;
--struct tag_mem_range *mem_reserved;
--struct tag_mem_range *mem_ramdisk;
--
--/*
-  * Initialize loops_per_jiffy as 5000000 (500MIPS).
-  * Better make it too large than too small...
-  */
-@@ -48,48 +43,193 @@ EXPORT_SYMBOL(boot_cpu_data);
- static char __initdata command_line[COMMAND_LINE_SIZE];
- 
- /*
-- * Should be more than enough, but if you have a _really_ complex
-- * setup, you might need to increase the size of this...
-+ * Standard memory resources
-  */
--static struct tag_mem_range __initdata mem_range_cache[32];
--static unsigned mem_range_next_free;
-+static struct resource __initdata kernel_data = {
-+	.name	= "Kernel data",
-+	.start	= 0,
-+	.end	= 0,
-+	.flags	= IORESOURCE_MEM,
-+};
-+static struct resource __initdata kernel_code = {
-+	.name	= "Kernel code",
-+	.start	= 0,
-+	.end	= 0,
-+	.flags	= IORESOURCE_MEM,
-+	.sibling = &kernel_data,
-+};
- 
- /*
-- * Standard memory resources
-+ * Available system RAM and reserved regions as singly linked
-+ * lists. These lists are traversed using the sibling pointer in
-+ * struct resource and are kept sorted at all times.
-  */
--static struct resource mem_res[] = {
--	{
--		.name	= "Kernel code",
--		.start	= 0,
--		.end	= 0,
--		.flags	= IORESOURCE_MEM
--	},
--	{
--		.name	= "Kernel data",
--		.start	= 0,
--		.end	= 0,
--		.flags	= IORESOURCE_MEM,
--	},
--};
-+static struct resource *__initdata system_ram;
-+static struct resource *__initdata reserved = &kernel_code;
-+
-+/*
-+ * We need to allocate these before the bootmem allocator is up and
-+ * running, so we need this "cache". 32 entries are probably enough
-+ * for all but the most insanely complex systems.
-+ */
-+static struct resource __initdata res_cache[32];
-+static unsigned int __initdata res_cache_next_free;
-+
-+static void __init resource_init(void)
-+{
-+	struct resource *mem, *res;
-+	struct resource *new;
-+
-+	kernel_code.start = __pa(init_mm.start_code);
-+
-+	for (mem = system_ram; mem; mem = mem->sibling) {
-+		new = alloc_bootmem_low(sizeof(struct resource));
-+		memcpy(new, mem, sizeof(struct resource));
-+
-+		new->sibling = NULL;
-+		if (request_resource(&iomem_resource, new))
-+			printk(KERN_WARNING "Bad RAM resource %08x-%08x\n",
-+			       mem->start, mem->end);
-+	}
-+
-+	for (res = reserved; res; res = res->sibling) {
-+		new = alloc_bootmem_low(sizeof(struct resource));
-+		memcpy(new, res, sizeof(struct resource));
-+
-+		new->sibling = NULL;
-+		if (insert_resource(&iomem_resource, new))
-+			printk(KERN_WARNING
-+			       "Bad reserved resource %s (%08x-%08x)\n",
-+			       res->name, res->start, res->end);
-+	}
-+}
-+
-+static void __init
-+add_physical_memory(resource_size_t start, resource_size_t end)
-+{
-+	struct resource *new, *next, **pprev;
-+
-+	for (pprev = &system_ram, next = system_ram; next;
-+	     pprev = &next->sibling, next = next->sibling) {
-+		if (end < next->start)
-+			break;
-+		if (start <= next->end) {
-+			printk(KERN_WARNING
-+			       "Warning: Physical memory map is broken\n");
-+			printk(KERN_WARNING
-+			       "Warning: %08x-%08x overlaps %08x-%08x\n",
-+			       start, end, next->start, next->end);
-+			return;
-+		}
-+	}
-+
-+	if (res_cache_next_free >= ARRAY_SIZE(res_cache)) {
-+		printk(KERN_WARNING
-+		       "Warning: Failed to add physical memory %08x-%08x\n",
-+		       start, end);
-+		return;
-+	}
-+
-+	new = &res_cache[res_cache_next_free++];
-+	new->start = start;
-+	new->end = end;
-+	new->name = "System RAM";
-+	new->flags = IORESOURCE_MEM;
-+
-+	*pprev = new;
-+}
-+
-+static int __init
-+add_reserved_region(resource_size_t start, resource_size_t end,
-+		    const char *name)
-+{
-+	struct resource *new, *next, **pprev;
-+
-+	if (end < start)
-+		return -EINVAL;
-+
-+	if (res_cache_next_free >= ARRAY_SIZE(res_cache))
-+		return -ENOMEM;
-+
-+	for (pprev = &reserved, next = reserved; next;
-+	     pprev = &next->sibling, next = next->sibling) {
-+		if (end < next->start)
-+			break;
-+		if (start <= next->end)
-+			return -EBUSY;
-+	}
-+
-+	new = &res_cache[res_cache_next_free++];
-+	new->start = start;
-+	new->end = end;
-+	new->name = name;
-+	new->flags = IORESOURCE_MEM;
-+
-+	*pprev = new;
-+
-+	return 0;
-+}
-+
-+static unsigned long __init
-+find_free_region(const struct resource *mem, resource_size_t size,
-+		 resource_size_t align)
-+{
-+	struct resource *res;
-+	unsigned long target;
-+
-+	target = ALIGN(mem->start, align);
-+	for (res = reserved; res; res = res->sibling) {
-+		if ((target + size) <= res->start)
-+			break;
-+		if (target <= res->end)
-+			target = ALIGN(res->end + 1, align);
-+	}
-+
-+	if ((target + size) > (mem->end + 1))
-+		return mem->end + 1;
-+
-+	return target;
-+}
-+
-+static int __init
-+alloc_reserved_region(resource_size_t *start, resource_size_t size,
-+		      resource_size_t align, const char *name)
-+{
-+	struct resource *mem;
-+	resource_size_t target;
-+	int ret;
-+
-+	for (mem = system_ram; mem; mem = mem->sibling) {
-+		target = find_free_region(mem, size, align);
-+		if (target <= mem->end) {
-+			ret = add_reserved_region(target, target + size - 1,
-+						  name);
-+			if (!ret)
-+				*start = target;
-+			return ret;
-+		}
-+	}
- 
--#define kernel_code	mem_res[0]
--#define kernel_data	mem_res[1]
-+	return -ENOMEM;
-+}
- 
- /*
-  * Early framebuffer allocation. Works as follows:
-  *   - If fbmem_size is zero, nothing will be allocated or reserved.
-  *   - If fbmem_start is zero when setup_bootmem() is called,
-- *     fbmem_size bytes will be allocated from the bootmem allocator.
-+ *     a block of fbmem_size bytes will be reserved before bootmem
-+ *     initialization. It will be aligned to the largest page size
-+ *     that fbmem_size is a multiple of.
-  *   - If fbmem_start is nonzero, an area of size fbmem_size will be
-- *     reserved at the physical address fbmem_start if necessary. If
-- *     the area isn't in a memory region known to the kernel, it will
-- *     be left alone.
-+ *     reserved at the physical address fbmem_start if possible. If
-+ *     it collides with other reserved memory, a different block of
-+ *     same size will be allocated, just as if fbmem_start was zero.
-  *
-  * Board-specific code may use these variables to set up platform data
-  * for the framebuffer driver if fbmem_size is nonzero.
-  */
--static unsigned long __initdata fbmem_start;
--static unsigned long __initdata fbmem_size;
-+resource_size_t __initdata fbmem_start;
-+resource_size_t __initdata fbmem_size;
- 
- /*
-  * "fbmem=xxx[kKmM]" allocates the specified amount of boot memory for
-@@ -103,48 +243,42 @@ static unsigned long __initdata fbmem_size;
-  */
- static int __init early_parse_fbmem(char *p)
- {
-+	int ret;
-+	unsigned long align;
-+
- 	fbmem_size = memparse(p, &p);
--	if (*p == '@')
-+	if (*p == '@') {
- 		fbmem_start = memparse(p, &p);
--	return 0;
--}
--early_param("fbmem", early_parse_fbmem);
--
--static inline void __init resource_init(void)
--{
--	struct tag_mem_range *region;
--
--	kernel_code.start = __pa(init_mm.start_code);
--	kernel_code.end = __pa(init_mm.end_code - 1);
--	kernel_data.start = __pa(init_mm.end_code);
--	kernel_data.end = __pa(init_mm.brk - 1);
--
--	for (region = mem_phys; region; region = region->next) {
--		struct resource *res;
--		unsigned long phys_start, phys_end;
--
--		if (region->size == 0)
--			continue;
--
--		phys_start = region->addr;
--		phys_end = phys_start + region->size - 1;
--
--		res = alloc_bootmem_low(sizeof(*res));
--		res->name = "System RAM";
--		res->start = phys_start;
--		res->end = phys_end;
--		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
--
--		request_resource (&iomem_resource, res);
-+		ret = add_reserved_region(fbmem_start,
-+					  fbmem_start + fbmem_size - 1,
-+					  "Framebuffer");
-+		if (ret) {
-+			printk(KERN_WARNING
-+			       "Failed to reserve framebuffer memory\n");
-+			fbmem_start = 0;
-+		}
-+	}
- 
--		if (kernel_code.start >= res->start &&
--		    kernel_code.end <= res->end)
--			request_resource (res, &kernel_code);
--		if (kernel_data.start >= res->start &&
--		    kernel_data.end <= res->end)
--			request_resource (res, &kernel_data);
-+	if (!fbmem_start) {
-+		if ((fbmem_size & 0x000fffffUL) == 0)
-+			align = 0x100000;	/* 1 MiB */
-+		else if ((fbmem_size & 0x0000ffffUL) == 0)
-+			align = 0x10000;	/* 64 KiB */
-+		else
-+			align = 0x1000;		/* 4 KiB */
-+
-+		ret = alloc_reserved_region(&fbmem_start, fbmem_size,
-+					    align, "Framebuffer");
-+		if (ret) {
-+			printk(KERN_WARNING
-+			       "Failed to allocate framebuffer memory\n");
-+			fbmem_size = 0;
-+		}
- 	}
-+
-+	return 0;
- }
-+early_param("fbmem", early_parse_fbmem);
- 
- static int __init parse_tag_core(struct tag *tag)
- {
-@@ -157,11 +291,9 @@ static int __init parse_tag_core(struct tag *tag)
- }
- __tagtable(ATAG_CORE, parse_tag_core);
- 
--static int __init parse_tag_mem_range(struct tag *tag,
--				      struct tag_mem_range **root)
-+static int __init parse_tag_mem(struct tag *tag)
- {
--	struct tag_mem_range *cur, **pprev;
--	struct tag_mem_range *new;
-+	unsigned long start, end;
- 
- 	/*
- 	 * Ignore zero-sized entries. If we're running standalone, the
-@@ -171,34 +303,53 @@ static int __init parse_tag_mem_range(struct tag *tag,
- 	if (tag->u.mem_range.size == 0)
- 		return 0;
- 
--	/*
--	 * Copy the data so the bootmem init code doesn't need to care
--	 * about it.
--	 */
--	if (mem_range_next_free >= ARRAY_SIZE(mem_range_cache))
--		panic("Physical memory map too complex!\n");
-+	start = tag->u.mem_range.addr;
-+	end = tag->u.mem_range.addr + tag->u.mem_range.size - 1;
-+
-+	add_physical_memory(start, end);
-+	return 0;
-+}
-+__tagtable(ATAG_MEM, parse_tag_mem);
-+
-+static int __init parse_tag_rdimg(struct tag *tag)
-+{
-+#ifdef CONFIG_INITRD
-+	struct tag_mem_range *mem = &tag->u.mem_range;
-+	int ret;
- 
--	new = &mem_range_cache[mem_range_next_free++];
--	*new = tag->u.mem_range;
-+	if (initrd_start) {
-+		printk(KERN_WARNING
-+		       "Warning: Only the first initrd image will be used\n");
-+		return 0;
-+	}
- 
--	pprev = root;
--	cur = *root;
--	while (cur) {
--		pprev = &cur->next;
--		cur = cur->next;
-+	ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
-+				  "initrd");
-+	if (ret) {
-+		printk(KERN_WARNING
-+		       "Warning: Failed to reserve initrd memory\n");
-+		return ret;
- 	}
- 
--	*pprev = new;
--	new->next = NULL;
-+	initrd_start = (unsigned long)__va(mem->addr);
-+	initrd_end = initrd_start + mem->size;
-+#else
-+	printk(KERN_WARNING "RAM disk image present, but "
-+	       "no initrd support in kernel, ignoring\n");
-+#endif
- 
- 	return 0;
- }
-+__tagtable(ATAG_RDIMG, parse_tag_rdimg);
- 
--static int __init parse_tag_mem(struct tag *tag)
-+static int __init parse_tag_rsvd_mem(struct tag *tag)
- {
--	return parse_tag_mem_range(tag, &mem_phys);
-+	struct tag_mem_range *mem = &tag->u.mem_range;
-+
-+	return add_reserved_region(mem->addr, mem->addr + mem->size - 1,
-+				   "Reserved");
- }
--__tagtable(ATAG_MEM, parse_tag_mem);
-+__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
- 
- static int __init parse_tag_cmdline(struct tag *tag)
- {
-@@ -207,12 +358,6 @@ static int __init parse_tag_cmdline(struct tag *tag)
- }
- __tagtable(ATAG_CMDLINE, parse_tag_cmdline);
- 
--static int __init parse_tag_rdimg(struct tag *tag)
--{
--	return parse_tag_mem_range(tag, &mem_ramdisk);
--}
--__tagtable(ATAG_RDIMG, parse_tag_rdimg);
--
- static int __init parse_tag_clock(struct tag *tag)
- {
- 	/*
-@@ -223,12 +368,6 @@ static int __init parse_tag_clock(struct tag *tag)
- }
- __tagtable(ATAG_CLOCK, parse_tag_clock);
- 
--static int __init parse_tag_rsvd_mem(struct tag *tag)
--{
--	return parse_tag_mem_range(tag, &mem_reserved);
--}
--__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
--
- /*
-  * Scan the tag table for this tag, and call its parse function. The
-  * tag table is built by the linker from all the __tagtable
-@@ -260,10 +399,137 @@ static void __init parse_tags(struct tag *t)
- 			       t->hdr.tag);
- }
- 
-+/*
-+ * Find a free memory region large enough for storing the
-+ * bootmem bitmap.
-+ */
-+static unsigned long __init
-+find_bootmap_pfn(const struct resource *mem)
-+{
-+	unsigned long bootmap_pages, bootmap_len;
-+	unsigned long node_pages = PFN_UP(mem->end - mem->start + 1);
-+	unsigned long bootmap_start;
-+
-+	bootmap_pages = bootmem_bootmap_pages(node_pages);
-+	bootmap_len = bootmap_pages << PAGE_SHIFT;
-+
-+	/*
-+	 * Find a large enough region without reserved pages for
-+	 * storing the bootmem bitmap. We can take advantage of the
-+	 * fact that all lists have been sorted.
-+	 *
-+	 * We have to check that we don't collide with any reserved
-+	 * regions, which includes the kernel image and any RAMDISK
-+	 * images.
-+	 */
-+	bootmap_start = find_free_region(mem, bootmap_len, PAGE_SIZE);
-+
-+	return bootmap_start >> PAGE_SHIFT;
-+}
-+
-+#define MAX_LOWMEM	HIGHMEM_START
-+#define MAX_LOWMEM_PFN	PFN_DOWN(MAX_LOWMEM)
-+
-+static void __init setup_bootmem(void)
-+{
-+	unsigned bootmap_size;
-+	unsigned long first_pfn, bootmap_pfn, pages;
-+	unsigned long max_pfn, max_low_pfn;
-+	unsigned node = 0;
-+	struct resource *res;
-+
-+	printk(KERN_INFO "Physical memory:\n");
-+	for (res = system_ram; res; res = res->sibling)
-+		printk("  %08x-%08x\n", res->start, res->end);
-+	printk(KERN_INFO "Reserved memory:\n");
-+	for (res = reserved; res; res = res->sibling)
-+		printk("  %08x-%08x: %s\n",
-+		       res->start, res->end, res->name);
-+
-+	nodes_clear(node_online_map);
-+
-+	if (system_ram->sibling)
-+		printk(KERN_WARNING "Only using first memory bank\n");
-+
-+	for (res = system_ram; res; res = NULL) {
-+		first_pfn = PFN_UP(res->start);
-+		max_low_pfn = max_pfn = PFN_DOWN(res->end + 1);
-+		bootmap_pfn = find_bootmap_pfn(res);
-+		if (bootmap_pfn > max_pfn)
-+			panic("No space for bootmem bitmap!\n");
-+
-+		if (max_low_pfn > MAX_LOWMEM_PFN) {
-+			max_low_pfn = MAX_LOWMEM_PFN;
-+#ifndef CONFIG_HIGHMEM
-+			/*
-+			 * Lowmem is memory that can be addressed
-+			 * directly through P1/P2
-+			 */
-+			printk(KERN_WARNING
-+			       "Node %u: Only %ld MiB of memory will be used.\n",
-+			       node, MAX_LOWMEM >> 20);
-+			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-+#else
-+#error HIGHMEM is not supported by AVR32 yet
-+#endif
-+		}
-+
-+		/* Initialize the boot-time allocator with low memory only. */
-+		bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
-+						 first_pfn, max_low_pfn);
-+
-+		/*
-+		 * Register fully available RAM pages with the bootmem
-+		 * allocator.
-+		 */
-+		pages = max_low_pfn - first_pfn;
-+		free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
-+				   PFN_PHYS(pages));
-+
-+		/* Reserve space for the bootmem bitmap... */
-+		reserve_bootmem_node(NODE_DATA(node),
-+				     PFN_PHYS(bootmap_pfn),
-+				     bootmap_size);
-+
-+		/* ...and any other reserved regions. */
-+		for (res = reserved; res; res = res->sibling) {
-+			if (res->start > PFN_PHYS(max_pfn))
-+				break;
-+
-+			/*
-+			 * resource_init will complain about partial
-+			 * overlaps, so we'll just ignore such
-+			 * resources for now.
-+			 */
-+			if (res->start >= PFN_PHYS(first_pfn)
-+			    && res->end < PFN_PHYS(max_pfn))
-+				reserve_bootmem_node(
-+					NODE_DATA(node), res->start,
-+					res->end - res->start + 1);
-+		}
-+
-+		node_set_online(node);
-+	}
-+}
-+
- void __init setup_arch (char **cmdline_p)
- {
- 	struct clk *cpu_clk;
- 
-+	init_mm.start_code = (unsigned long)_text;
-+	init_mm.end_code = (unsigned long)_etext;
-+	init_mm.end_data = (unsigned long)_edata;
-+	init_mm.brk = (unsigned long)_end;
-+
-+	/*
-+	 * Include .init section to make allocations easier. It will
-+	 * be removed before the resource is actually requested.
-+	 */
-+	kernel_code.start = __pa(__init_begin);
-+	kernel_code.end = __pa(init_mm.end_code - 1);
-+	kernel_data.start = __pa(init_mm.end_code);
-+	kernel_data.end = __pa(init_mm.brk - 1);
-+
- 	parse_tags(bootloader_tags);
- 
- 	setup_processor();
-@@ -289,24 +555,16 @@ void __init setup_arch (char **cmdline_p)
- 		       ((cpu_hz + 500) / 1000) % 1000);
- 	}
- 
--	init_mm.start_code = (unsigned long) &_text;
--	init_mm.end_code = (unsigned long) &_etext;
--	init_mm.end_data = (unsigned long) &_edata;
--	init_mm.brk = (unsigned long) &_end;
--
- 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- 	*cmdline_p = command_line;
- 	parse_early_param();
- 
- 	setup_bootmem();
- 
--	board_setup_fbmem(fbmem_start, fbmem_size);
--
- #ifdef CONFIG_VT
- 	conswitchp = &dummy_con;
- #endif
- 
- 	paging_init();
--
- 	resource_init();
- }
-diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
-index c10833f..7014a35 100644
---- a/arch/avr32/kernel/time.c
-+++ b/arch/avr32/kernel/time.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) 2004-2006 Atmel Corporation
-+ * Copyright (C) 2004-2007 Atmel Corporation
-  *
-  * Based on MIPS implementation arch/mips/kernel/time.c
-  *   Copyright 2001 MontaVista Software Inc.
-@@ -20,18 +20,25 @@
- #include <linux/init.h>
- #include <linux/profile.h>
- #include <linux/sysdev.h>
-+#include <linux/err.h>
- 
- #include <asm/div64.h>
- #include <asm/sysreg.h>
- #include <asm/io.h>
- #include <asm/sections.h>
- 
--static cycle_t read_cycle_count(void)
-+/* how many counter cycles in a jiffy? */
-+static u32 cycles_per_jiffy;
-+
-+/* the count value for the next timer interrupt */
-+static u32 expirelo;
-+
-+cycle_t __weak read_cycle_count(void)
- {
- 	return (cycle_t)sysreg_read(COUNT);
- }
- 
--static struct clocksource clocksource_avr32 = {
-+struct clocksource __weak clocksource_avr32 = {
- 	.name		= "avr32",
- 	.rating		= 350,
- 	.read		= read_cycle_count,
-@@ -40,12 +47,20 @@ static struct clocksource clocksource_avr32 = {
- 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
- };
- 
-+irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
-+
-+struct irqaction timer_irqaction = {
-+	.handler	= timer_interrupt,
-+	.flags		= IRQF_DISABLED,
-+	.name		= "timer",
-+};
-+
- /*
-  * By default we provide the null RTC ops
-  */
- static unsigned long null_rtc_get_time(void)
- {
--	return mktime(2004, 1, 1, 0, 0, 0);
-+	return mktime(2007, 1, 1, 0, 0, 0);
- }
- 
- static int null_rtc_set_time(unsigned long sec)
-@@ -56,23 +71,14 @@ static int null_rtc_set_time(unsigned long sec)
- static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
- static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
- 
--/* how many counter cycles in a jiffy? */
--static unsigned long cycles_per_jiffy;
--
--/* cycle counter value at the previous timer interrupt */
--static unsigned int timerhi, timerlo;
--
--/* the count value for the next timer interrupt */
--static unsigned int expirelo;
--
- static void avr32_timer_ack(void)
- {
--	unsigned int count;
-+	u32 count;
- 
- 	/* Ack this timer interrupt and set the next one */
- 	expirelo += cycles_per_jiffy;
-+	/* setting COMPARE to 0 stops the COUNT-COMPARE */
- 	if (expirelo == 0) {
--		printk(KERN_DEBUG "expirelo == 0\n");
- 		sysreg_write(COMPARE, expirelo + 1);
- 	} else {
- 		sysreg_write(COMPARE, expirelo);
-@@ -86,27 +92,56 @@ static void avr32_timer_ack(void)
- 	}
- }
- 
--static unsigned int avr32_hpt_read(void)
-+int __weak avr32_hpt_init(void)
- {
--	return sysreg_read(COUNT);
-+	int ret;
-+	unsigned long mult, shift, count_hz;
-+
-+	count_hz = clk_get_rate(boot_cpu_data.clk);
-+	shift = clocksource_avr32.shift;
-+	mult = clocksource_hz2mult(count_hz, shift);
-+	clocksource_avr32.mult = mult;
-+
-+	{
-+		u64 tmp;
-+
-+		tmp = TICK_NSEC;
-+		tmp <<= shift;
-+		tmp += mult / 2;
-+		do_div(tmp, mult);
-+
-+		cycles_per_jiffy = tmp;
-+	}
-+
-+	ret = setup_irq(0, &timer_irqaction);
-+	if (ret) {
-+		pr_debug("timer: could not request IRQ 0: %d\n", ret);
-+		return -ENODEV;
-+	}
-+
-+	printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
-+			"%lu.%03lu MHz\n",
-+			((count_hz + 500) / 1000) / 1000,
-+			((count_hz + 500) / 1000) % 1000);
-+
-+	return 0;
- }
- 
- /*
-  * Taken from MIPS c0_hpt_timer_init().
-  *
-- * Why is it so complicated, and what is "count"?  My assumption is
-- * that `count' specifies the "reference cycle", i.e. the cycle since
-- * reset that should mean "zero". The reason COUNT is written twice is
-- * probably to make sure we don't get any timer interrupts while we
-- * are messing with the counter.
-+ * The reason COUNT is written twice is probably to make sure we don't get any
-+ * timer interrupts while we are messing with the counter.
-  */
--static void avr32_hpt_init(unsigned int count)
-+int __weak avr32_hpt_start(void)
- {
--	count = sysreg_read(COUNT) - count;
-+	u32 count = sysreg_read(COUNT);
- 	expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
- 	sysreg_write(COUNT, expirelo - cycles_per_jiffy);
- 	sysreg_write(COMPARE, expirelo);
- 	sysreg_write(COUNT, count);
-+
-+	return 0;
- }
- 
- /*
-@@ -115,26 +150,18 @@ static void avr32_hpt_init(unsigned int count)
-  *
-  * In UP mode, it is invoked from the (global) timer_interrupt.
-  */
--static void local_timer_interrupt(int irq, void *dev_id)
-+void local_timer_interrupt(int irq, void *dev_id)
- {
- 	if (current->pid)
- 		profile_tick(CPU_PROFILING);
- 	update_process_times(user_mode(get_irq_regs()));
- }
- 
--static irqreturn_t
--timer_interrupt(int irq, void *dev_id)
-+irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
- {
--	unsigned int count;
--
- 	/* ack timer interrupt and try to set next interrupt */
--	count = avr32_hpt_read();
- 	avr32_timer_ack();
- 
--	/* Update timerhi/timerlo for intra-jiffy calibration */
--	timerhi += count < timerlo;	/* Wrap around */
--	timerlo = count;
--
- 	/*
- 	 * Call the generic timer interrupt handler
- 	 */
-@@ -153,60 +180,37 @@ timer_interrupt(int irq, void *dev_id)
- 	return IRQ_HANDLED;
- }
- 
--static struct irqaction timer_irqaction = {
--	.handler	= timer_interrupt,
--	.flags		= IRQF_DISABLED,
--	.name		= "timer",
--};
--
- void __init time_init(void)
- {
--	unsigned long mult, shift, count_hz;
- 	int ret;
- 
-+	/*
-+	 * Make sure we don't get any COMPARE interrupts before we can
-+	 * handle them.
-+	 */
-+	sysreg_write(COMPARE, 0);
-+
- 	xtime.tv_sec = rtc_get_time();
- 	xtime.tv_nsec = 0;
- 
- 	set_normalized_timespec(&wall_to_monotonic,
- 				-xtime.tv_sec, -xtime.tv_nsec);
- 
--	printk("Before time_init: count=%08lx, compare=%08lx\n",
--	       (unsigned long)sysreg_read(COUNT),
--	       (unsigned long)sysreg_read(COMPARE));
--
--	count_hz = clk_get_rate(boot_cpu_data.clk);
--	shift = clocksource_avr32.shift;
--	mult = clocksource_hz2mult(count_hz, shift);
--	clocksource_avr32.mult = mult;
--
--	printk("Cycle counter: mult=%lu, shift=%lu\n", mult, shift);
--
--	{
--		u64 tmp;
--
--		tmp = TICK_NSEC;
--		tmp <<= shift;
--		tmp += mult / 2;
--		do_div(tmp, mult);
--
--		cycles_per_jiffy = tmp;
-+	ret = avr32_hpt_init();
-+	if (ret) {
-+		pr_debug("timer: failed setup: %d\n", ret);
-+		return;
- 	}
- 
--	/* This sets up the high precision timer for the first interrupt. */
--	avr32_hpt_init(avr32_hpt_read());
--
--	printk("After time_init: count=%08lx, compare=%08lx\n",
--	       (unsigned long)sysreg_read(COUNT),
--	       (unsigned long)sysreg_read(COMPARE));
--
- 	ret = clocksource_register(&clocksource_avr32);
- 	if (ret)
--		printk(KERN_ERR
--		       "timer: could not register clocksource: %d\n", ret);
-+		pr_debug("timer: could not register clocksource: %d\n", ret);
- 
--	ret = setup_irq(0, &timer_irqaction);
--	if (ret)
--		printk("timer: could not request IRQ 0: %d\n", ret);
-+	ret = avr32_hpt_start();
-+	if (ret) {
-+		pr_debug("timer: failed starting: %d\n", ret);
-+		return;
-+	}
- }
- 
- static struct sysdev_class timer_class = {
-diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
-index adc01a1..4d7ae14 100644
---- a/arch/avr32/kernel/traps.c
-+++ b/arch/avr32/kernel/traps.c
-@@ -5,158 +5,25 @@
-  * it under the terms of the GNU General Public License version 2 as
-  * published by the Free Software Foundation.
-  */
--#undef DEBUG
--#include <linux/sched.h>
-+
-+#include <linux/bug.h>
- #include <linux/init.h>
--#include <linux/module.h>
- #include <linux/kallsyms.h>
-+#include <linux/module.h>
- #include <linux/notifier.h>
-+#include <linux/sched.h>
-+#include <linux/uaccess.h>
- 
--#include <asm/traps.h>
--#include <asm/sysreg.h>
- #include <asm/addrspace.h>
--#include <asm/ocd.h>
- #include <asm/mmu_context.h>
--#include <asm/uaccess.h>
--
--static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
--{
--	unsigned long p;
--	int i;
--
--	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
--
--	for (p = bottom & ~31; p < top; ) {
--		printk("%04lx: ", p & 0xffff);
--
--		for (i = 0; i < 8; i++, p += 4) {
--			unsigned int val;
--
--			if (p < bottom || p >= top)
--				printk("         ");
--			else {
--				if (__get_user(val, (unsigned int __user *)p)) {
--					printk("\n");
--					goto out;
--				}
--				printk("%08x ", val);
--			}
--		}
--		printk("\n");
--	}
--
--out:
--	return;
--}
--
--static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
--{
--	return (p > (unsigned long)tinfo)
--		&& (p < (unsigned long)tinfo + THREAD_SIZE - 3);
--}
--
--#ifdef CONFIG_FRAME_POINTER
--static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
--				struct pt_regs *regs)
--{
--	unsigned long lr, fp;
--	struct thread_info *tinfo;
--
--	tinfo = (struct thread_info *)
--		((unsigned long)sp & ~(THREAD_SIZE - 1));
--
--	if (regs)
--		fp = regs->r7;
--	else if (tsk == current)
--		asm("mov %0, r7" : "=r"(fp));
--	else
--		fp = tsk->thread.cpu_context.r7;
--
--	/*
--	 * Walk the stack as long as the frame pointer (a) is within
--	 * the kernel stack of the task, and (b) it doesn't move
--	 * downwards.
--	 */
--	while (valid_stack_ptr(tinfo, fp)) {
--		unsigned long new_fp;
--
--		lr = *(unsigned long *)fp;
--		printk(" [<%08lx>] ", lr);
--		print_symbol("%s\n", lr);
--
--		new_fp = *(unsigned long *)(fp + 4);
--		if (new_fp <= fp)
--			break;
--		fp = new_fp;
--	}
--	printk("\n");
--}
--#else
--static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
--				struct pt_regs *regs)
--{
--	unsigned long addr;
--
--	while (!kstack_end(sp)) {
--		addr = *sp++;
--		if (kernel_text_address(addr)) {
--			printk(" [<%08lx>] ", addr);
--			print_symbol("%s\n", addr);
--		}
--	}
--}
--#endif
--
--void show_trace(struct task_struct *tsk, unsigned long *sp,
--		       struct pt_regs *regs)
--{
--	if (regs &&
--	    (((regs->sr & MODE_MASK) == MODE_EXCEPTION) ||
--	     ((regs->sr & MODE_MASK) == MODE_USER)))
--		return;
--
--	printk ("Call trace:");
--#ifdef CONFIG_KALLSYMS
--	printk("\n");
--#endif
--
--	__show_trace(tsk, sp, regs);
--	printk("\n");
--}
--
--void show_stack(struct task_struct *tsk, unsigned long *sp)
--{
--	unsigned long stack;
--
--	if (!tsk)
--		tsk = current;
--	if (sp == 0) {
--		if (tsk == current) {
--			register unsigned long *real_sp __asm__("sp");
--			sp = real_sp;
--		} else {
--			sp = (unsigned long *)tsk->thread.cpu_context.ksp;
--		}
--	}
--
--	stack = (unsigned long)sp;
--	dump_mem("Stack: ", stack,
--		 THREAD_SIZE + (unsigned long)tsk->thread_info);
--	show_trace(tsk, sp, NULL);
--}
--
--void dump_stack(void)
--{
--	show_stack(NULL, NULL);
--}
--EXPORT_SYMBOL(dump_stack);
-+#include <asm/ocd.h>
-+#include <asm/sysreg.h>
-+#include <asm/traps.h>
- 
- ATOMIC_NOTIFIER_HEAD(avr32_die_chain);
- 
- int register_die_notifier(struct notifier_block *nb)
- {
--	pr_debug("register_die_notifier: %p\n", nb);
--
- 	return atomic_notifier_chain_register(&avr32_die_chain, nb);
- }
- EXPORT_SYMBOL(register_die_notifier);
-@@ -169,98 +36,108 @@ EXPORT_SYMBOL(unregister_die_notifier);
- 
- static DEFINE_SPINLOCK(die_lock);
- 
--void __die(const char *str, struct pt_regs *regs, unsigned long err,
--	   const char *file, const char *func, unsigned long line)
-+void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
- {
--	struct task_struct *tsk = current;
- 	static int die_counter;
- 
- 	console_verbose();
- 	spin_lock_irq(&die_lock);
- 	bust_spinlocks(1);
- 
--	printk(KERN_ALERT "%s", str);
--	if (file && func)
--		printk(" in %s:%s, line %ld", file, func, line);
--	printk("[#%d]:\n", ++die_counter);
--	print_modules();
--	show_regs(regs);
--	printk("Process %s (pid: %d, stack limit = 0x%p)\n",
--	       tsk->comm, tsk->pid, tsk->thread_info + 1);
--
--	if (!user_mode(regs) || in_interrupt()) {
--		dump_mem("Stack: ", regs->sp,
--			 THREAD_SIZE + (unsigned long)tsk->thread_info);
-+	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
-+	       str, err, ++die_counter);
-+#ifdef CONFIG_PREEMPT
-+	printk("PREEMPT ");
-+#endif
-+#ifdef CONFIG_FRAME_POINTER
-+	printk("FRAME_POINTER ");
-+#endif
-+	if (current_cpu_data.features & AVR32_FEATURE_OCD) {
-+		unsigned long did = __mfdr(DBGREG_DID);
-+		printk("chip: 0x%03lx:0x%04lx rev %lu\n",
-+		       (did >> 1) & 0x7ff,
-+		       (did >> 12) & 0x7fff,
-+		       (did >> 28) & 0xf);
-+	} else {
-+		printk("cpu: arch %u r%u / core %u r%u\n",
-+		       current_cpu_data.arch_type,
-+		       current_cpu_data.arch_revision,
-+		       current_cpu_data.cpu_type,
-+		       current_cpu_data.cpu_revision);
- 	}
- 
-+	print_modules();
-+	show_regs_log_lvl(regs, KERN_EMERG);
-+	show_stack_log_lvl(current, regs->sp, regs, KERN_EMERG);
- 	bust_spinlocks(0);
- 	spin_unlock_irq(&die_lock);
--	do_exit(SIGSEGV);
-+
-+	if (in_interrupt())
-+		panic("Fatal exception in interrupt");
-+
-+	if (panic_on_oops)
-+		panic("Fatal exception");
-+
-+	do_exit(err);
- }
- 
--void __die_if_kernel(const char *str, struct pt_regs *regs, unsigned long err,
--		     const char *file, const char *func, unsigned long line)
-+void _exception(long signr, struct pt_regs *regs, int code,
-+		unsigned long addr)
- {
-+	siginfo_t info;
-+
- 	if (!user_mode(regs))
--		__die(str, regs, err, file, func, line);
--}
-+		die("Unhandled exception in kernel mode", regs, signr);
-+
-+	memset(&info, 0, sizeof(info));
-+	info.si_signo = signr;
-+	info.si_code = code;
-+	info.si_addr = (void __user *)addr;
-+	force_sig_info(signr, &info, current);
- 
--asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
--{
--#ifdef CONFIG_SUBARCH_AVR32B
- 	/*
--	 * The exception entry always saves RSR_EX. For NMI, this is
--	 * wrong; it should be RSR_NMI
-+	 * Init gets no signals that it doesn't have a handler for.
-+	 * That's all very well, but if it has caused a synchronous
-+	 * exception and we ignore the resulting signal, it will just
-+	 * generate the same exception over and over again and we get
-+	 * nowhere.  Better to kill it and let the kernel panic.
- 	 */
--	regs->sr = sysreg_read(RSR_NMI);
--#endif
-+	if (is_init(current)) {
-+		__sighandler_t handler;
-+
-+		spin_lock_irq(&current->sighand->siglock);
-+		handler = current->sighand->action[signr-1].sa.sa_handler;
-+		spin_unlock_irq(&current->sighand->siglock);
-+		if (handler == SIG_DFL) {
-+			/* init has generated a synchronous exception
-+			   and it doesn't have a handler for the signal */
-+			printk(KERN_CRIT "init has generated signal %ld "
-+			       "but has no handler for it\n", signr);
-+			do_exit(signr);
-+		}
-+	}
-+}
- 
--	printk("NMI taken!!!!\n");
--	die("NMI", regs, ecr);
--	BUG();
-+asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
-+{
-+	printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
-+	show_regs_log_lvl(regs, KERN_ALERT);
-+	show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
- }
- 
- asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
- {
--	printk("Unable to handle critical exception %lu at pc = %08lx!\n",
--	       ecr, regs->pc);
--	die("Oops", regs, ecr);
--	BUG();
-+	die("Critical exception", regs, SIGKILL);
- }
- 
- asmlinkage void do_address_exception(unsigned long ecr, struct pt_regs *regs)
- {
--	siginfo_t info;
--
--	die_if_kernel("Oops: Address exception in kernel mode", regs, ecr);
--
--#ifdef DEBUG
--	if (ecr == ECR_ADDR_ALIGN_X)
--		pr_debug("Instruction Address Exception at pc = %08lx\n",
--			 regs->pc);
--	else if (ecr == ECR_ADDR_ALIGN_R)
--		pr_debug("Data Address Exception (Read) at pc = %08lx\n",
--			 regs->pc);
--	else if (ecr == ECR_ADDR_ALIGN_W)
--		pr_debug("Data Address Exception (Write) at pc = %08lx\n",
--			 regs->pc);
--	else
--		BUG();
--
--	show_regs(regs);
--#endif
--
--	info.si_signo = SIGBUS;
--	info.si_errno = 0;
--	info.si_code = BUS_ADRALN;
--	info.si_addr = (void __user *)regs->pc;
--
--	force_sig_info(SIGBUS, &info, current);
-+	_exception(SIGBUS, regs, BUS_ADRALN, regs->pc);
- }
- 
- /* This way of handling undefined instructions is stolen from ARM */
- static LIST_HEAD(undef_hook);
--static spinlock_t undef_lock = SPIN_LOCK_UNLOCKED;
-+static DEFINE_SPINLOCK(undef_lock);
- 
- void register_undef_hook(struct undef_hook *hook)
- {
-@@ -280,7 +157,8 @@ static int do_cop_absent(u32 insn)
- {
- 	int cop_nr;
- 	u32 cpucr;
--	if ( (insn & 0xfdf00000) == 0xf1900000 )
-+
-+	if ((insn & 0xfdf00000) == 0xf1900000)
- 		/* LDC0 */
- 		cop_nr = 0;
- 	else
-@@ -292,136 +170,91 @@ static int do_cop_absent(u32 insn)
- 	sysreg_write(CPUCR, cpucr);
- 
- 	cpucr = sysreg_read(CPUCR);
--	if ( !(cpucr & (1 << (24 + cop_nr))) ){
--		printk("Coprocessor #%i not found!\n", cop_nr);
--		return -1;
--	}
-+	if (!(cpucr & (1 << (24 + cop_nr))))
-+		return -ENODEV;
- 
- 	return 0;
- }
- 
--#ifdef CONFIG_BUG
--#ifdef CONFIG_DEBUG_BUGVERBOSE
--static inline void do_bug_verbose(struct pt_regs *regs, u32 insn)
--{
--	char *file;
--	u16 line;
--	char c;
--
--	if (__get_user(line, (u16 __user *)(regs->pc + 2)))
--		return;
--	if (__get_user(file, (char * __user *)(regs->pc + 4))
--	    || (unsigned long)file < PAGE_OFFSET
--	    || __get_user(c, file))
--		file = "<bad filename>";
--
--	printk(KERN_ALERT "kernel BUG at %s:%d!\n", file, line);
--}
--#else
--static inline void do_bug_verbose(struct pt_regs *regs, u32 insn)
-+int is_valid_bugaddr(unsigned long pc)
- {
-+	unsigned short opcode;
-+
-+	if (pc < PAGE_OFFSET)
-+		return 0;
-+	if (probe_kernel_address((u16 *)pc, opcode))
-+		return 0;
- 
-+	return opcode == AVR32_BUG_OPCODE;
- }
--#endif
--#endif
- 
- asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
- {
- 	u32 insn;
- 	struct undef_hook *hook;
--	siginfo_t info;
- 	void __user *pc;
-+	long code;
- 
--	if (!user_mode(regs))
--		goto kernel_trap;
-+	if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) {
-+		enum bug_trap_type type;
-+
-+		type = report_bug(regs->pc);
-+		switch (type) {
-+		case BUG_TRAP_TYPE_NONE:
-+			break;
-+		case BUG_TRAP_TYPE_WARN:
-+			regs->pc += 2;
-+			return;
-+		case BUG_TRAP_TYPE_BUG:
-+			die("Kernel BUG", regs, SIGKILL);
-+		}
-+	}
- 
- 	local_irq_enable();
- 
--	pc = (void __user *)instruction_pointer(regs);
--	if (__get_user(insn, (u32 __user *)pc))
--		goto invalid_area;
-+	if (user_mode(regs)) {
-+		pc = (void __user *)instruction_pointer(regs);
-+		if (get_user(insn, (u32 __user *)pc))
-+			goto invalid_area;
- 
--        if (ecr == ECR_COPROC_ABSENT) {
--		if (do_cop_absent(insn) == 0)
-+		if (ecr == ECR_COPROC_ABSENT && !do_cop_absent(insn))
- 			return;
--        }
- 
--	spin_lock_irq(&undef_lock);
--	list_for_each_entry(hook, &undef_hook, node) {
--		if ((insn & hook->insn_mask) == hook->insn_val) {
--			if (hook->fn(regs, insn) == 0) {
--				spin_unlock_irq(&undef_lock);
--				return;
-+		spin_lock_irq(&undef_lock);
-+		list_for_each_entry(hook, &undef_hook, node) {
-+			if ((insn & hook->insn_mask) == hook->insn_val) {
-+				if (hook->fn(regs, insn) == 0) {
-+					spin_unlock_irq(&undef_lock);
-+					return;
-+				}
- 			}
- 		}
-+		spin_unlock_irq(&undef_lock);
- 	}
--	spin_unlock_irq(&undef_lock);
--
--invalid_area:
- 
--#ifdef DEBUG
--	printk("Illegal instruction at pc = %08lx\n", regs->pc);
--	if (regs->pc < TASK_SIZE) {
--		unsigned long ptbr, pgd, pte, *p;
--
--		ptbr = sysreg_read(PTBR);
--		p = (unsigned long *)ptbr;
--		pgd = p[regs->pc >> 22];
--		p = (unsigned long *)((pgd & 0x1ffff000) | 0x80000000);
--		pte = p[(regs->pc >> 12) & 0x3ff];
--		printk("page table: 0x%08lx -> 0x%08lx -> 0x%08lx\n", ptbr, pgd, pte);
--	}
--#endif
--
--	info.si_signo = SIGILL;
--	info.si_errno = 0;
--	info.si_addr = (void __user *)regs->pc;
- 	switch (ecr) {
--	case ECR_ILLEGAL_OPCODE:
--	case ECR_UNIMPL_INSTRUCTION:
--		info.si_code = ILL_ILLOPC;
--		break;
- 	case ECR_PRIVILEGE_VIOLATION:
--		info.si_code = ILL_PRVOPC;
-+		code = ILL_PRVOPC;
- 		break;
- 	case ECR_COPROC_ABSENT:
--		info.si_code = ILL_COPROC;
-+		code = ILL_COPROC;
- 		break;
- 	default:
--		BUG();
-+		code = ILL_ILLOPC;
-+		break;
- 	}
- 
--	force_sig_info(SIGILL, &info, current);
-+	_exception(SIGILL, regs, code, regs->pc);
- 	return;
- 
--kernel_trap:
--#ifdef CONFIG_BUG
--	if (__kernel_text_address(instruction_pointer(regs))) {
--		insn = *(u16 *)instruction_pointer(regs);
--		if (insn == AVR32_BUG_OPCODE) {
--			do_bug_verbose(regs, insn);
--			die("Kernel BUG", regs, 0);
--			return;
--		}
--	}
--#endif
--
--	die("Oops: Illegal instruction in kernel code", regs, ecr);
-+invalid_area:
-+	_exception(SIGSEGV, regs, SEGV_MAPERR, regs->pc);
- }
- 
- asmlinkage void do_fpe(unsigned long ecr, struct pt_regs *regs)
- {
--	siginfo_t info;
--
--	printk("Floating-point exception at pc = %08lx\n", regs->pc);
--
--	/* We have no FPU... */
--	info.si_signo = SIGILL;
--	info.si_errno = 0;
--	info.si_addr = (void __user *)regs->pc;
--	info.si_code = ILL_COPROC;
--
--	force_sig_info(SIGILL, &info, current);
-+	/* We have no FPU yet */
-+	_exception(SIGILL, regs, ILL_COPROC, regs->pc);
- }
- 
- 
-diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c
-index ef13b7c..e7f72c9 100644
---- a/arch/avr32/kernel/vmlinux.lds.c
-+++ b/arch/avr32/kernel/vmlinux.lds.c
-@@ -26,10 +26,16 @@ SECTIONS
- 			_sinittext = .;
- 			*(.text.reset)
- 			*(.init.text)
-+			/*
-+			 * .exit.text is discarded at runtime, not
-+			 * link time, to deal with references from
-+			 * __bug_table
-+			 */
-+			*(.exit.text)
- 			_einittext = .;
- 		. = ALIGN(4);
- 		__tagtable_begin = .;
--			*(.taglist)
-+			*(.taglist.init)
- 		__tagtable_end = .;
- 			*(.init.data)
- 		. = ALIGN(16);
-@@ -86,6 +92,8 @@ SECTIONS
- 		__stop___ex_table = .;
- 	}
- 
-+	BUG_TABLE
-+
- 	RODATA
- 
- 	. = ALIGN(8192);
-@@ -126,7 +134,6 @@ SECTIONS
- 	 * thrown away, as cleanup code is never called unless it's a module.
- 	 */
- 	/DISCARD/       	: {
--		*(.exit.text)
- 		*(.exit.data)
- 		*(.exitcall.exit)
- 	}
-diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
-new file mode 100644
-index 0000000..eb30783
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -0,0 +1,31 @@
-+if PLATFORM_AT32AP
-+
-+menu "Atmel AVR32 AP options"
-+
-+choice
-+	prompt "AT32AP7000 static memory bus width"
-+	depends on CPU_AT32AP7000
-+	default AP7000_16_BIT_SMC
-+	help
-+	  Define the width of the AP7000 external static memory interface.
-+	  This is used to determine how to mangle the address and/or data
-+	  when doing little-endian port access.
-+
-+	  The current code can only support a single external memory bus
-+	  width for all chip selects, excluding the flash (which is using
-+	  raw access and is thus not affected by any of this.)
-+
-+config AP7000_32_BIT_SMC
-+	bool "32 bit"
-+
-+config AP7000_16_BIT_SMC
-+	bool "16 bit"
-+
-+config AP7000_8_BIT_SMC
-+	bool "8 bit"
-+
-+endchoice
-+
-+endmenu
-+
-+endif # PLATFORM_AT32AP
-diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
-index b21bea9..f1d3957 100644
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -1,2 +1,3 @@
- obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
- obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
-+obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
-diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
-index 472703f..028883f 100644
---- a/arch/avr32/mach-at32ap/at32ap7000.c
-+++ b/arch/avr32/mach-at32ap/at32ap7000.c
-@@ -6,6 +6,7 @@
-  * published by the Free Software Foundation.
-  */
- #include <linux/clk.h>
-+#include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-@@ -17,7 +18,10 @@
- #include <asm/arch/portmux.h>
- #include <asm/arch/sm.h>
- 
-+#include <video/atmel_lcdc.h>
-+
- #include "clock.h"
-+#include "hmatrix.h"
- #include "pio.h"
- #include "sm.h"
- 
-@@ -407,8 +411,6 @@ static void __init genclk_init_parent(struct clk *clk)
- static struct resource sm_resource[] = {
- 	PBMEM(0xfff00000),
- 	NAMED_IRQ(19, "eim"),
--	NAMED_IRQ(20, "pm"),
--	NAMED_IRQ(21, "rtc"),
- };
- struct platform_device at32_sm_device = {
- 	.name		= "sm",
-@@ -416,7 +418,55 @@ struct platform_device at32_sm_device = {
- 	.resource	= sm_resource,
- 	.num_resources	= ARRAY_SIZE(sm_resource),
- };
--DEV_CLK(pclk, at32_sm, pbb, 0);
-+static struct clk at32_sm_pclk = {
-+	.name		= "pclk",
-+	.dev		= &at32_sm_device.dev,
-+	.parent		= &pbb_clk,
-+	.mode		= pbb_clk_mode,
-+	.get_rate	= pbb_clk_get_rate,
-+	.users		= 1,
-+	.index		= 0,
-+};
-+
-+static struct resource pm_resource[] = {
-+	PBMEM(0xfff00000),
-+	IRQ(20),
-+};
-+struct platform_device at32_pm_device = {
-+	.name		= "pm",
-+	.id		= 0,
-+	.resource	= pm_resource,
-+	.num_resources	= ARRAY_SIZE(pm_resource),
-+};
-+
-+static struct resource rtc_resource[] = {
-+	{
-+		.start	= 0xfff00080,
-+		.end	= 0xfff000a3,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(21),
-+};
-+struct platform_device at32_rtc_device = {
-+	.name		= "rtc",
-+	.id		= 0,
-+	.resource	= rtc_resource,
-+	.num_resources	= ARRAY_SIZE(rtc_resource),
-+};
-+
-+static struct resource wdt_resource[] = {
-+	{
-+		.start	= 0xfff000b0,
-+		.end	= 0xfff000b7,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+struct platform_device at32_wdt_device = {
-+	.name		= "wdt",
-+	.id		= 0,
-+	.resource	= wdt_resource,
-+	.num_resources	= ARRAY_SIZE(wdt_resource),
-+};
- 
- static struct resource intc0_resource[] = {
- 	PBMEM(0xfff00400),
-@@ -442,6 +492,7 @@ static struct clk hramc_clk = {
- 	.mode		= hsb_clk_mode,
- 	.get_rate	= hsb_clk_get_rate,
- 	.users		= 1,
-+	.index		= 3,
- };
- 
- static struct resource smc0_resource[] = {
-@@ -466,6 +517,68 @@ static struct clk pico_clk = {
- 	.users		= 1,
- };
- 
-+static struct resource dmaca0_resource[] = {
-+	{
-+		.start	= 0xff200000,
-+		.end	= 0xff20ffff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(2),
-+};
-+DEFINE_DEV(dmaca, 0);
-+DEV_CLK(hclk, dmaca0, hsb, 10);
-+
-+/* --------------------------------------------------------------------
-+ * HMATRIX
-+ * -------------------------------------------------------------------- */
-+
-+static struct clk hmatrix_clk = {
-+	.name		= "hmatrix_clk",
-+	.parent		= &pbb_clk,
-+	.mode		= pbb_clk_mode,
-+	.get_rate	= pbb_clk_get_rate,
-+	.index		= 2,
-+	.users		= 1,
-+};
-+#define HMATRIX_BASE	((void __iomem *)0xfff00800)
-+
-+#define hmatrix_readl(reg)					\
-+	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-+#define hmatrix_writel(reg,value)				\
-+	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
-+
-+/*
-+ * Set bits in the HMATRIX Special Function Register (SFR) used by the
-+ * External Bus Interface (EBI). This can be used to enable special
-+ * features like CompactFlash support, NAND Flash support, etc. on
-+ * certain chipselects.
-+ */
-+static inline void set_ebi_sfr_bits(u32 mask)
-+{
-+	u32 sfr;
-+
-+	clk_enable(&hmatrix_clk);
-+	sfr = hmatrix_readl(SFR4);
-+	sfr |= mask;
-+	hmatrix_writel(SFR4, sfr);
-+	clk_disable(&hmatrix_clk);
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  System Timer/Counter (TC)
-+ * -------------------------------------------------------------------- */
-+static struct resource at32_systc0_resource[] = {
-+	PBMEM(0xfff00c00),
-+	IRQ(22),
-+};
-+struct platform_device at32_systc0_device = {
-+	.name		= "systc",
-+	.id		= 0,
-+	.resource	= at32_systc0_resource,
-+	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
-+};
-+DEV_CLK(pclk, at32_systc0, pbb, 3);
-+
- /* --------------------------------------------------------------------
-  *  PIO
-  * -------------------------------------------------------------------- */
-@@ -510,9 +623,15 @@ void __init at32_add_system_devices(void)
- 	system_manager.eim_first_irq = EIM_IRQ_BASE;
- 
- 	platform_device_register(&at32_sm_device);
-+	platform_device_register(&at32_pm_device);
-+	platform_device_register(&at32_rtc_device);
-+	platform_device_register(&at32_wdt_device);
- 	platform_device_register(&at32_intc0_device);
- 	platform_device_register(&smc0_device);
- 	platform_device_register(&pdc_device);
-+	platform_device_register(&dmaca0_device);
-+
-+	platform_device_register(&at32_systc0_device);
- 
- 	platform_device_register(&pio0_device);
- 	platform_device_register(&pio1_device);
-@@ -816,22 +935,105 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- }
- 
- /* --------------------------------------------------------------------
-+ *  TWI
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource atmel_twi0_resource[] = {
-+	PBMEM(0xffe00800),
-+	IRQ(5),
-+};
-+DEFINE_DEV(atmel_twi, 0);
-+DEV_CLK(pclk,atmel_twi0,pba,2);
-+
-+struct platform_device *__init
-+at32_add_device_twi(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &atmel_twi0_device;
-+		select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
-+		select_peripheral(PA(7),  PERIPH_A, 0);	/* SCL	*/
-+		break;
-+
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * MMC
-+ * -------------------------------------------------------------------- */
-+static struct mci_platform_data atmel_mci0_data = {
-+	.detect_pin	= GPIO_PIN_NONE,
-+	.wp_pin		= GPIO_PIN_NONE,
-+};
-+static struct resource atmel_mci0_resource[] = {
-+	PBMEM(0xfff02400),
-+	IRQ(28),
-+};
-+DEFINE_DEV_DATA(atmel_mci, 0);
-+DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
-+
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &atmel_mci0_device;
-+		select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
-+		select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
-+		select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
-+		select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
-+		select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
-+		select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	if (data) {
-+		if (data->detect_pin != GPIO_PIN_NONE)
-+			at32_select_gpio(data->detect_pin, 0);
-+		if (data->wp_pin != GPIO_PIN_NONE)
-+			at32_select_gpio(data->wp_pin, 0);
-+		memcpy(pdev->dev.platform_data, data,
-+		       sizeof(struct mci_platform_data));
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-  *  LCDC
-  * -------------------------------------------------------------------- */
--static struct lcdc_platform_data lcdc0_data;
--static struct resource lcdc0_resource[] = {
-+static struct atmel_lcdfb_info atmel_lcdfb0_data;
-+static struct resource atmel_lcdfb0_resource[] = {
- 	{
- 		.start		= 0xff000000,
- 		.end		= 0xff000fff,
- 		.flags		= IORESOURCE_MEM,
- 	},
- 	IRQ(1),
-+	{
-+		/* Placeholder for pre-allocated fb memory */
-+		.start		= 0x00000000,
-+		.end		= 0x00000000,
-+		.flags		= 0,
-+	},
- };
--DEFINE_DEV_DATA(lcdc, 0);
--DEV_CLK(hclk, lcdc0, hsb, 7);
--static struct clk lcdc0_pixclk = {
--	.name		= "pixclk",
--	.dev		= &lcdc0_device.dev,
-+DEFINE_DEV_DATA(atmel_lcdfb, 0);
-+DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
-+static struct clk atmel_lcdfb0_pixclk = {
-+	.name		= "lcdc_clk",
-+	.dev		= &atmel_lcdfb0_device.dev,
- 	.mode		= genclk_mode,
- 	.get_rate	= genclk_get_rate,
- 	.set_rate	= genclk_set_rate,
-@@ -840,13 +1042,34 @@ static struct clk lcdc0_pixclk = {
- };
- 
- struct platform_device *__init
--at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data)
-+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-+		     unsigned long fbmem_start, unsigned long fbmem_len)
- {
- 	struct platform_device *pdev;
-+	struct atmel_lcdfb_info *info;
-+	struct fb_monspecs *monspecs;
-+	struct fb_videomode *modedb;
-+	unsigned int modedb_size;
-+
-+	/*
-+	 * Do a deep copy of the fb data, monspecs and modedb. Make
-+	 * sure all allocations are done before setting up the
-+	 * portmux.
-+	 */
-+	monspecs = kmemdup(data->default_monspecs,
-+			   sizeof(struct fb_monspecs), GFP_KERNEL);
-+	if (!monspecs)
-+		return NULL;
-+
-+	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
-+	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
-+	if (!modedb)
-+		goto err_dup_modedb;
-+	monspecs->modedb = modedb;
- 
- 	switch (id) {
- 	case 0:
--		pdev = &lcdc0_device;
-+		pdev = &atmel_lcdfb0_device;
- 		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
- 		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
- 		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-@@ -879,16 +1102,287 @@ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data)
- 		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
- 		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
- 
--		clk_set_parent(&lcdc0_pixclk, &pll0);
--		clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0));
-+		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
-+		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-+		break;
-+
-+	default:
-+		goto err_invalid_id;
-+	}
-+
-+	if (fbmem_len) {
-+		pdev->resource[2].start = fbmem_start;
-+		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
-+		pdev->resource[2].flags = IORESOURCE_MEM;
-+	}
-+
-+	info = pdev->dev.platform_data;
-+	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
-+	info->default_monspecs = monspecs;
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+
-+err_invalid_id:
-+	kfree(modedb);
-+err_dup_modedb:
-+	kfree(monspecs);
-+	return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  USB Device Controller
-+ * -------------------------------------------------------------------- */
-+static struct resource usba0_resource[] = {
-+	{
-+		.start		= 0xff300000,
-+		.end		= 0xff3fffff,
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	PBMEM(0xfff03000),
-+	IRQ(31),
-+};
-+DEFINE_DEV(usba, 0);
-+DEV_CLK(pclk, usba0, pbb, 12);
-+DEV_CLK(hclk, usba0, hsb, 6);
-+
-+struct platform_device *__init at32_add_device_usba(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &usba0_device;
-+		/* USB pads are not multiplexed */
- 		break;
-+	default:
-+		return NULL;
-+	}
- 
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  SSC
-+ * -------------------------------------------------------------------- */
-+static struct resource ssc0_resource[] = {
-+	PBMEM(0xffe01c00),
-+	IRQ(10),
-+};
-+DEFINE_DEV(ssc, 0);
-+DEV_CLK(pclk, ssc0, pba, 7);
-+
-+static struct resource ssc1_resource[] = {
-+	PBMEM(0xffe02000),
-+	IRQ(11),
-+};
-+DEFINE_DEV(ssc, 1);
-+DEV_CLK(pclk, ssc1, pba, 8);
-+
-+static struct resource ssc2_resource[] = {
-+	PBMEM(0xffe02400),
-+	IRQ(12),
-+};
-+DEFINE_DEV(ssc, 2);
-+DEV_CLK(pclk, ssc2, pba, 9);
-+
-+struct platform_device *__init
-+at32_add_device_ssc(unsigned int id, unsigned int flags)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &ssc0_device;
-+		if (flags & ATMEL_SSC_RF)
-+			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
-+		if (flags & ATMEL_SSC_RK)
-+			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
-+		if (flags & ATMEL_SSC_TK)
-+			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
-+		if (flags & ATMEL_SSC_TF)
-+			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
-+		if (flags & ATMEL_SSC_TD)
-+			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
-+		if (flags & ATMEL_SSC_RD)
-+			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
-+		break;
-+	case 1:
-+		pdev = &ssc1_device;
-+		if (flags & ATMEL_SSC_RF)
-+			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
-+		if (flags & ATMEL_SSC_RK)
-+			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
-+		if (flags & ATMEL_SSC_TK)
-+			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
-+		if (flags & ATMEL_SSC_TF)
-+			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
-+		if (flags & ATMEL_SSC_TD)
-+			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
-+		if (flags & ATMEL_SSC_RD)
-+			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
-+		break;
-+	case 2:
-+		pdev = &ssc2_device;
-+		if (flags & ATMEL_SSC_TD)
-+			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
-+		if (flags & ATMEL_SSC_RD)
-+			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
-+		if (flags & ATMEL_SSC_TK)
-+			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
-+		if (flags & ATMEL_SSC_TF)
-+			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
-+		if (flags & ATMEL_SSC_RF)
-+			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
-+		if (flags & ATMEL_SSC_RK)
-+			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  AC97C
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_ac97c0_resource[] = {
-+	PBMEM(0xfff02800),
-+	IRQ(29),
-+};
-+DEFINE_DEV(atmel_ac97c, 0);
-+DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
-+
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &atmel_ac97c0_device;
-+		select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
-+		select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
-+		select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
-+		select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
-+		break;
- 	default:
- 		return NULL;
- 	}
- 
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  DAC
-+ * -------------------------------------------------------------------- */
-+static struct resource abdac0_resource[] = {
-+	PBMEM(0xfff02000),
-+	IRQ(27),
-+};
-+DEFINE_DEV(abdac, 0);
-+DEV_CLK(pclk, abdac0, pbb, 8);
-+static struct clk abdac0_sample_clk = {
-+	.name           = "sample_clk",
-+	.dev            = &abdac0_device.dev,
-+	.mode           = genclk_mode,
-+	.get_rate       = genclk_get_rate,
-+	.set_rate       = genclk_set_rate,
-+	.set_parent     = genclk_set_parent,
-+	.index          = 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_abdac(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &abdac0_device;
-+		select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
-+		select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
-+		select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
-+		select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * CompactFlash
-+ * -------------------------------------------------------------------- */
-+static struct cf_platform_data at32_cf0_data;
-+static struct resource at32_cf0_resource[] = {
-+	{
-+		.start	= 0x04000000,
-+		.end	= 0x07ffffff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(~0UL),
-+};
-+DEFINE_DEV_DATA(at32_cf, 0);
-+
-+struct platform_device *__init
-+at32_add_device_cf(unsigned int id, unsigned int extint,
-+		   struct cf_platform_data *data)
-+{
-+	struct platform_device *pdev;
-+	unsigned int extint_pin;
-+
-+	switch (extint) {
-+	case 0:
-+		extint_pin = GPIO_PIN_PB(25);
-+		break;
-+	case 1:
-+		extint_pin = GPIO_PIN_PB(26);
-+		break;
-+	case 2:
-+		extint_pin = GPIO_PIN_PB(27);
-+		break;
-+	case 3:
-+		extint_pin = GPIO_PIN_PB(28);
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &at32_cf0_device;
-+		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1 */
-+		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2 */
-+		select_peripheral(PE(21), PERIPH_A, 0);	/* NCS4  */
-+		select_peripheral(PE(23), PERIPH_A, 0);	/* CFNRW */
-+		select_peripheral(PE(24), PERIPH_A, 0);	/* NWAIT */
-+		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
-+		data->cs = 4;
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	if (data->detect_pin)
-+		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-+	if (data->reset_pin)
-+		at32_select_gpio(data->reset_pin, 0);
-+	if (data->vcc_pin)
-+		at32_select_gpio(data->vcc_pin, 0);
-+
-+	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_PULLUP);
-+	pdev->resource[1].start = system_manager.eim_first_irq + extint;
-+	pdev->resource[1].end = pdev->resource[1].start;
-+
- 	memcpy(pdev->dev.platform_data, data,
--	       sizeof(struct lcdc_platform_data));
-+	       sizeof(struct cf_platform_data));
- 
- 	platform_device_register(pdev);
- 	return pdev;
-@@ -950,18 +1444,21 @@ struct clk *at32_clock_list[] = {
- 	&pbb_clk,
- 	&at32_sm_pclk,
- 	&at32_intc0_pclk,
-+	&hmatrix_clk,
- 	&ebi_clk,
- 	&hramc_clk,
- 	&smc0_pclk,
- 	&smc0_mck,
- 	&pdc_hclk,
- 	&pdc_pclk,
-+	&dmaca0_hclk,
- 	&pico_clk,
- 	&pio0_mck,
- 	&pio1_mck,
- 	&pio2_mck,
- 	&pio3_mck,
- 	&pio4_mck,
-+	&at32_systc0_pclk,
- 	&atmel_usart0_usart,
- 	&atmel_usart1_usart,
- 	&atmel_usart2_usart,
-@@ -972,8 +1469,18 @@ struct clk *at32_clock_list[] = {
- 	&macb1_pclk,
- 	&atmel_spi0_spi_clk,
- 	&atmel_spi1_spi_clk,
--	&lcdc0_hclk,
--	&lcdc0_pixclk,
-+	&atmel_twi0_pclk,
-+	&atmel_mci0_mci_clk,
-+	&atmel_lcdfb0_hck1,
-+	&atmel_lcdfb0_pixclk,
-+	&usba0_pclk,
-+	&usba0_hclk,
-+	&ssc0_pclk,
-+	&ssc1_pclk,
-+	&ssc2_pclk,
-+	&atmel_ac97c0_pclk,
-+	&abdac0_pclk,
-+	&abdac0_sample_clk,
- 	&gclk0,
- 	&gclk1,
- 	&gclk2,
-@@ -1012,7 +1519,8 @@ void __init at32_clock_init(void)
- 	genclk_init_parent(&gclk2);
- 	genclk_init_parent(&gclk3);
- 	genclk_init_parent(&gclk4);
--	genclk_init_parent(&lcdc0_pixclk);
-+	genclk_init_parent(&atmel_lcdfb0_pixclk);
-+	genclk_init_parent(&abdac0_sample_clk);
- 
- 	/*
- 	 * Turn on all clocks that have at least one user already, and
-@@ -1024,6 +1532,9 @@ void __init at32_clock_init(void)
- 	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
- 		struct clk *clk = at32_clock_list[i];
- 
-+		if (clk->users == 0)
-+			continue;
-+
- 		if (clk->mode == &cpu_clk_mode)
- 			cpu_mask |= 1 << clk->index;
- 		else if (clk->mode == &hsb_clk_mode)
-diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
-index 00c4354..e8a12a3 100644
---- a/arch/avr32/mach-at32ap/clock.c
-+++ b/arch/avr32/mach-at32ap/clock.c
-@@ -18,7 +18,7 @@
- 
- #include "clock.h"
- 
--static spinlock_t clk_lock = SPIN_LOCK_UNLOCKED;
-+static DEFINE_SPINLOCK(clk_lock);
- 
- struct clk *clk_get(struct device *dev, const char *id)
- {
-@@ -125,7 +125,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
- 	ret = clk->set_rate(clk, rate, 1);
- 	spin_unlock_irqrestore(&clk_lock, flags);
- 
--	return (ret < 0) ? ret : 0;
-+	return (ret > 0) ? ret : 0;
- }
- EXPORT_SYMBOL(clk_set_rate);
- 
-diff --git a/arch/avr32/mach-at32ap/hmatrix.h b/arch/avr32/mach-at32ap/hmatrix.h
-new file mode 100644
-index 0000000..d10bfb6
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/hmatrix.h
-@@ -0,0 +1,182 @@
-+/*
-+ * Register definitions for High-Speed Bus Matrix
-+ */
-+#ifndef __HMATRIX_H
-+#define __HMATRIX_H
-+
-+/* HMATRIX register offsets */
-+#define HMATRIX_MCFG0				0x0000
-+#define HMATRIX_MCFG1				0x0004
-+#define HMATRIX_MCFG2				0x0008
-+#define HMATRIX_MCFG3				0x000c
-+#define HMATRIX_MCFG4				0x0010
-+#define HMATRIX_MCFG5				0x0014
-+#define HMATRIX_MCFG6				0x0018
-+#define HMATRIX_MCFG7				0x001c
-+#define HMATRIX_MCFG8				0x0020
-+#define HMATRIX_MCFG9				0x0024
-+#define HMATRIX_MCFG10				0x0028
-+#define HMATRIX_MCFG11				0x002c
-+#define HMATRIX_MCFG12				0x0030
-+#define HMATRIX_MCFG13				0x0034
-+#define HMATRIX_MCFG14				0x0038
-+#define HMATRIX_MCFG15				0x003c
-+#define HMATRIX_SCFG0				0x0040
-+#define HMATRIX_SCFG1				0x0044
-+#define HMATRIX_SCFG2				0x0048
-+#define HMATRIX_SCFG3				0x004c
-+#define HMATRIX_SCFG4				0x0050
-+#define HMATRIX_SCFG5				0x0054
-+#define HMATRIX_SCFG6				0x0058
-+#define HMATRIX_SCFG7				0x005c
-+#define HMATRIX_SCFG8				0x0060
-+#define HMATRIX_SCFG9				0x0064
-+#define HMATRIX_SCFG10				0x0068
-+#define HMATRIX_SCFG11				0x006c
-+#define HMATRIX_SCFG12				0x0070
-+#define HMATRIX_SCFG13				0x0074
-+#define HMATRIX_SCFG14				0x0078
-+#define HMATRIX_SCFG15				0x007c
-+#define HMATRIX_PRAS0				0x0080
-+#define HMATRIX_PRBS0				0x0084
-+#define HMATRIX_PRAS1				0x0088
-+#define HMATRIX_PRBS1				0x008c
-+#define HMATRIX_PRAS2				0x0090
-+#define HMATRIX_PRBS2				0x0094
-+#define HMATRIX_PRAS3				0x0098
-+#define HMATRIX_PRBS3				0x009c
-+#define HMATRIX_PRAS4				0x00a0
-+#define HMATRIX_PRBS4				0x00a4
-+#define HMATRIX_PRAS5				0x00a8
-+#define HMATRIX_PRBS5				0x00ac
-+#define HMATRIX_PRAS6				0x00b0
-+#define HMATRIX_PRBS6				0x00b4
-+#define HMATRIX_PRAS7				0x00b8
-+#define HMATRIX_PRBS7				0x00bc
-+#define HMATRIX_PRAS8				0x00c0
-+#define HMATRIX_PRBS8				0x00c4
-+#define HMATRIX_PRAS9				0x00c8
-+#define HMATRIX_PRBS9				0x00cc
-+#define HMATRIX_PRAS10				0x00d0
-+#define HMATRIX_PRBS10				0x00d4
-+#define HMATRIX_PRAS11				0x00d8
-+#define HMATRIX_PRBS11				0x00dc
-+#define HMATRIX_PRAS12				0x00e0
-+#define HMATRIX_PRBS12				0x00e4
-+#define HMATRIX_PRAS13				0x00e8
-+#define HMATRIX_PRBS13				0x00ec
-+#define HMATRIX_PRAS14				0x00f0
-+#define HMATRIX_PRBS14				0x00f4
-+#define HMATRIX_PRAS15				0x00f8
-+#define HMATRIX_PRBS15				0x00fc
-+#define HMATRIX_MRCR				0x0100
-+#define HMATRIX_SFR0				0x0110
-+#define HMATRIX_SFR1				0x0114
-+#define HMATRIX_SFR2				0x0118
-+#define HMATRIX_SFR3				0x011c
-+#define HMATRIX_SFR4				0x0120
-+#define HMATRIX_SFR5				0x0124
-+#define HMATRIX_SFR6				0x0128
-+#define HMATRIX_SFR7				0x012c
-+#define HMATRIX_SFR8				0x0130
-+#define HMATRIX_SFR9				0x0134
-+#define HMATRIX_SFR10				0x0138
-+#define HMATRIX_SFR11				0x013c
-+#define HMATRIX_SFR12				0x0140
-+#define HMATRIX_SFR13				0x0144
-+#define HMATRIX_SFR14				0x0148
-+#define HMATRIX_SFR15				0x014c
-+
-+/* Bitfields in MCFGx */
-+#define HMATRIX_ULBT_OFFSET			0
-+#define HMATRIX_ULBT_SIZE			3
-+
-+/* Bitfields in SCFGx */
-+#define HMATRIX_SLOT_CYCLE_OFFSET		0
-+#define HMATRIX_SLOT_CYCLE_SIZE			8
-+#define HMATRIX_DEFMSTR_TYPE_OFFSET		16
-+#define HMATRIX_DEFMSTR_TYPE_SIZE		2
-+#define HMATRIX_FIXED_DEFMSTR_OFFSET		18
-+#define HMATRIX_FIXED_DEFMSTR_SIZE		4
-+#define HMATRIX_ARBT_OFFSET			24
-+#define HMATRIX_ARBT_SIZE			2
-+
-+/* Bitfields in PRASx */
-+#define HMATRIX_M0PR_OFFSET			0
-+#define HMATRIX_M0PR_SIZE			4
-+#define HMATRIX_M1PR_OFFSET			4
-+#define HMATRIX_M1PR_SIZE			4
-+#define HMATRIX_M2PR_OFFSET			8
-+#define HMATRIX_M2PR_SIZE			4
-+#define HMATRIX_M3PR_OFFSET			12
-+#define HMATRIX_M3PR_SIZE			4
-+#define HMATRIX_M4PR_OFFSET			16
-+#define HMATRIX_M4PR_SIZE			4
-+#define HMATRIX_M5PR_OFFSET			20
-+#define HMATRIX_M5PR_SIZE			4
-+#define HMATRIX_M6PR_OFFSET			24
-+#define HMATRIX_M6PR_SIZE			4
-+#define HMATRIX_M7PR_OFFSET			28
-+#define HMATRIX_M7PR_SIZE			4
-+
-+/* Bitfields in PRBSx */
-+#define HMATRIX_M8PR_OFFSET			0
-+#define HMATRIX_M8PR_SIZE			4
-+#define HMATRIX_M9PR_OFFSET			4
-+#define HMATRIX_M9PR_SIZE			4
-+#define HMATRIX_M10PR_OFFSET			8
-+#define HMATRIX_M10PR_SIZE			4
-+#define HMATRIX_M11PR_OFFSET			12
-+#define HMATRIX_M11PR_SIZE			4
-+#define HMATRIX_M12PR_OFFSET			16
-+#define HMATRIX_M12PR_SIZE			4
-+#define HMATRIX_M13PR_OFFSET			20
-+#define HMATRIX_M13PR_SIZE			4
-+#define HMATRIX_M14PR_OFFSET			24
-+#define HMATRIX_M14PR_SIZE			4
-+#define HMATRIX_M15PR_OFFSET			28
-+#define HMATRIX_M15PR_SIZE			4
-+
-+/* Bitfields in SFR4 */
-+#define HMATRIX_CS1A_OFFSET			1
-+#define HMATRIX_CS1A_SIZE			1
-+#define HMATRIX_CS3A_OFFSET			3
-+#define HMATRIX_CS3A_SIZE			1
-+#define HMATRIX_CS4A_OFFSET			4
-+#define HMATRIX_CS4A_SIZE			1
-+#define HMATRIX_CS5A_OFFSET			5
-+#define HMATRIX_CS5A_SIZE			1
-+#define HMATRIX_DBPUC_OFFSET			8
-+#define HMATRIX_DBPUC_SIZE			1
-+
-+/* Constants for ULBT */
-+#define HMATRIX_ULBT_INFINITE			0
-+#define HMATRIX_ULBT_SINGLE			1
-+#define HMATRIX_ULBT_FOUR_BEAT			2
-+#define HMATRIX_ULBT_EIGHT_BEAT			3
-+#define HMATRIX_ULBT_SIXTEEN_BEAT		4
-+
-+/* Constants for DEFMSTR_TYPE */
-+#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT		0
-+#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT	1
-+#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT	2
-+
-+/* Constants for ARBT */
-+#define HMATRIX_ARBT_ROUND_ROBIN		0
-+#define HMATRIX_ARBT_FIXED_PRIORITY		1
-+
-+/* Bit manipulation macros */
-+#define HMATRIX_BIT(name)					\
-+	(1 << HMATRIX_##name##_OFFSET)
-+#define HMATRIX_BF(name,value)					\
-+	(((value) & ((1 << HMATRIX_##name##_SIZE) - 1))		\
-+	 << HMATRIX_##name##_OFFSET)
-+#define HMATRIX_BFEXT(name,value)				\
-+	(((value) >> HMATRIX_##name##_OFFSET)			\
-+	 & ((1 << HMATRIX_##name##_SIZE) - 1))
-+#define HMATRIX_BFINS(name,value,old)				\
-+	(((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1)		\
-+		    << HMATRIX_##name##_OFFSET))		\
-+	 | HMATRIX_BF(name,value))
-+
-+#endif /* __HMATRIX_H */
-diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
-index 7691721..5e22a75 100644
---- a/arch/avr32/mach-at32ap/hsmc.c
-+++ b/arch/avr32/mach-at32ap/hsmc.c
-@@ -75,12 +75,35 @@ int smc_set_configuration(int cs, const struct smc_config *config)
- 		return -EINVAL;
- 	}
- 
-+	switch (config->nwait_mode) {
-+	case 0:
-+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED);
-+		break;
-+	case 1:
-+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED);
-+		break;
-+	case 2:
-+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN);
-+		break;
-+	case 3:
-+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	if (config->tdf_cycles) {
-+		mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles);
-+	}
-+
- 	if (config->nrd_controlled)
- 		mode |= HSMC_BIT(READ_MODE);
- 	if (config->nwe_controlled)
- 		mode |= HSMC_BIT(WRITE_MODE);
- 	if (config->byte_write)
- 		mode |= HSMC_BIT(BAT);
-+	if (config->tdf_mode)
-+		mode |= HSMC_BIT(TDF_MODE);
- 
- 	pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n",
- 		 cs, setup, pulse, cycle, mode);
-diff --git a/arch/avr32/mach-at32ap/time-tc.c b/arch/avr32/mach-at32ap/time-tc.c
-new file mode 100644
-index 0000000..e3070bd
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/time-tc.c
-@@ -0,0 +1,218 @@
-+/*
-+ * Copyright (C) 2004-2007 Atmel Corporation
-+ *
-+ * Based on MIPS implementation arch/mips/kernel/time.c
-+ *   Copyright 2001 MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/clocksource.h>
-+#include <linux/time.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/profile.h>
-+#include <linux/sysdev.h>
-+#include <linux/err.h>
-+
-+#include <asm/div64.h>
-+#include <asm/sysreg.h>
-+#include <asm/io.h>
-+#include <asm/sections.h>
-+
-+#include <asm/arch/time.h>
-+
-+/* how many counter cycles in a jiffy? */
-+static u32 cycles_per_jiffy;
-+
-+/* the count value for the next timer interrupt */
-+static u32 expirelo;
-+
-+/* the I/O registers of the TC module */
-+static void __iomem *ioregs;
-+
-+cycle_t read_cycle_count(void)
-+{
-+	return (cycle_t)timer_read(ioregs, 0, CV);
-+}
-+
-+struct clocksource clocksource_avr32 = {
-+	.name		= "avr32",
-+	.rating		= 342,
-+	.read		= read_cycle_count,
-+	.mask		= CLOCKSOURCE_MASK(16),
-+	.shift		= 16,
-+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+static void avr32_timer_ack(void)
-+{
-+	u16 count = expirelo;
-+
-+	/* Ack this timer interrupt and set the next one, use a u16
-+	 * variable so it will wrap around correctly */
-+	count += cycles_per_jiffy;
-+	expirelo = count;
-+	timer_write(ioregs, 0, RC, expirelo);
-+
-+	/* Check to see if we have missed any timer interrupts */
-+	count = timer_read(ioregs, 0, CV);
-+	if ((count - expirelo) < 0x7fff) {
-+		expirelo = count + cycles_per_jiffy;
-+		timer_write(ioregs, 0, RC, expirelo);
-+	}
-+}
-+
-+u32 avr32_hpt_read(void)
-+{
-+	return timer_read(ioregs, 0, CV);
-+}
-+
-+static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
-+{
-+	unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
-+	unsigned int divs[] = { 4, 8, 16, 32 };
-+	int divs_size = sizeof(divs) / sizeof(*divs);
-+	int i = 0;
-+	unsigned long count_hz;
-+	unsigned long shift;
-+	unsigned long mult;
-+	int clock_div = -1;
-+	u64 tmp;
-+
-+	shift = clocksource_avr32.shift;
-+
-+	do {
-+		count_hz = clk_get_rate(pclk) / divs[i];
-+		mult = clocksource_hz2mult(count_hz, shift);
-+		clocksource_avr32.mult = mult;
-+
-+		tmp = TICK_NSEC;
-+		tmp <<= shift;
-+		tmp += mult / 2;
-+		do_div(tmp, mult);
-+
-+		cycles_per_jiffy = tmp;
-+	} while (cycles_per_jiffy > cycles_max && ++i < divs_size);
-+
-+	clock_div = i + 1;
-+
-+	if (clock_div > divs_size) {
-+		pr_debug("timer: could not calculate clock divider\n");
-+		return -EFAULT;
-+	}
-+
-+	/* Set the clock divider */
-+	timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
-+
-+	return 0;
-+}
-+
-+int avr32_hpt_init(unsigned int count)
-+{
-+	struct resource *regs;
-+	struct clk *pclk;
-+	int irq = -1;
-+	int ret = 0;
-+
-+	ret = -ENXIO;
-+
-+	irq = platform_get_irq(&at32_systc0_device, 0);
-+	if (irq < 0) {
-+		pr_debug("timer: could not get irq\n");
-+		goto out_error;
-+	}
-+
-+	pclk = clk_get(&at32_systc0_device.dev, "pclk");
-+	if (IS_ERR(pclk)) {
-+		pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
-+		goto out_error;
-+	}
-+	clk_enable(pclk);
-+
-+	regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		pr_debug("timer: could not get resource\n");
-+		goto out_error_clk;
-+	}
-+
-+	ioregs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!ioregs) {
-+		pr_debug("timer: could not get ioregs\n");
-+		goto out_error_clk;
-+	}
-+
-+	ret = avr32_timer_calc_div_and_set_jiffies(pclk);
-+	if (ret)
-+		goto out_error_io;
-+
-+	ret = setup_irq(irq, &timer_irqaction);
-+	if (ret) {
-+		pr_debug("timer: could not request irq %d: %d\n",
-+				irq, ret);
-+		goto out_error_io;
-+	}
-+
-+	expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
-+		* cycles_per_jiffy;
-+
-+	/* Enable clock and interrupts on RC compare */
-+	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
-+	timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
-+	/* Set cycles to first interrupt */
-+	timer_write(ioregs, 0,  RC, expirelo);
-+
-+	printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
-+			ioregs, irq);
-+
-+	return 0;
-+
-+out_error_io:
-+	iounmap(ioregs);
-+out_error_clk:
-+	clk_put(pclk);
-+out_error:
-+	return ret;
-+}
-+
-+int avr32_hpt_start(void)
-+{
-+	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
-+	return 0;
-+}
-+
-+irqreturn_t timer_interrupt(int irq, void *dev_id)
-+{
-+	unsigned int sr = timer_read(ioregs, 0, SR);
-+
-+	if (sr & TIMER_BIT(SR_CPCS)) {
-+		/* ack timer interrupt and try to set next interrupt */
-+		avr32_timer_ack();
-+
-+		/*
-+		 * Call the generic timer interrupt handler
-+		 */
-+		write_seqlock(&xtime_lock);
-+		do_timer(1);
-+		write_sequnlock(&xtime_lock);
-+
-+		/*
-+		 * In UP mode, we call local_timer_interrupt() to do profiling
-+		 * and process accounting.
-+		 *
-+		 * SMP is not supported yet.
-+		 */
-+		local_timer_interrupt(irq, dev_id);
-+
-+		return IRQ_HANDLED;
-+	}
-+
-+	return IRQ_NONE;
-+}
-diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
-index b68d669..099212d 100644
---- a/arch/avr32/mm/dma-coherent.c
-+++ b/arch/avr32/mm/dma-coherent.c
-@@ -112,16 +112,21 @@ void dma_free_coherent(struct device *dev, size_t size,
- }
- EXPORT_SYMBOL(dma_free_coherent);
- 
--#if 0
- void *dma_alloc_writecombine(struct device *dev, size_t size,
- 			     dma_addr_t *handle, gfp_t gfp)
- {
- 	struct page *page;
-+	dma_addr_t phys;
- 
- 	page = __dma_alloc(dev, size, handle, gfp);
-+	if (!page)
-+		return NULL;
-+
-+	phys = page_to_phys(page);
-+	*handle = phys;
- 
- 	/* Now, map the page into P3 with write-combining turned on */
--	return __ioremap(page_to_phys(page), size, _PAGE_BUFFER);
-+	return __ioremap(phys, size, _PAGE_BUFFER);
- }
- EXPORT_SYMBOL(dma_alloc_writecombine);
- 
-@@ -132,8 +137,7 @@ void dma_free_writecombine(struct device *dev, size_t size,
- 
- 	iounmap(cpu_addr);
- 
--	page = bus_to_page(handle);
-+	page = phys_to_page(handle);
- 	__dma_free(dev, size, page, handle);
- }
- EXPORT_SYMBOL(dma_free_writecombine);
--#endif
-diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
-index 6785572..11941d8 100644
---- a/arch/avr32/mm/fault.c
-+++ b/arch/avr32/mm/fault.c
-@@ -12,73 +12,46 @@
- #include <linux/mm.h>
- #include <linux/module.h>
- #include <linux/pagemap.h>
-+#include <linux/kprobes.h>
- 
- #include <asm/kdebug.h>
- #include <asm/mmu_context.h>
- #include <asm/sysreg.h>
--#include <asm/uaccess.h>
- #include <asm/tlb.h>
--
--#ifdef DEBUG
--static void dump_code(unsigned long pc)
--{
--	char *p = (char *)pc;
--	char val;
--	int i;
--
--
--	printk(KERN_DEBUG "Code:");
--	for (i = 0; i < 16; i++) {
--		if (__get_user(val, p + i))
--			break;
--		printk(" %02x", val);
--	}
--	printk("\n");
--}
--#endif
-+#include <asm/uaccess.h>
- 
- #ifdef CONFIG_KPROBES
--ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
--
--/* Hook to register for page fault notifications */
--int register_page_fault_notifier(struct notifier_block *nb)
-+static inline int notify_page_fault(struct pt_regs *regs, int trap)
- {
--	return atomic_notifier_chain_register(&notify_page_fault_chain, nb);
--}
-+	int ret = 0;
- 
--int unregister_page_fault_notifier(struct notifier_block *nb)
--{
--	return atomic_notifier_chain_unregister(&notify_page_fault_chain, nb);
--}
-+	if (!user_mode(regs)) {
-+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
-+			ret = 1;
-+	}
- 
--static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
--				    int trap, int sig)
--{
--	struct die_args args = {
--		.regs = regs,
--		.trapnr = trap,
--	};
--	return atomic_notifier_call_chain(&notify_page_fault_chain, val, &args);
-+	return ret;
- }
- #else
--static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
--				    int trap, int sig)
-+static inline int notify_page_fault(struct pt_regs *regs, int trap)
- {
--	return NOTIFY_DONE;
-+	return 0;
- }
- #endif
- 
-+int exception_trace = 1;
-+
- /*
-  * This routine handles page faults. It determines the address and the
-  * problem, and then passes it off to one of the appropriate routines.
-  *
-  * ecr is the Exception Cause Register. Possible values are:
-- *   5:  Page not found (instruction access)
-  *   6:  Protection fault (instruction access)
-- *   12: Page not found (read access)
-- *   13: Page not found (write access)
-- *   14: Protection fault (read access)
-- *   15: Protection fault (write access)
-+ *   15: Protection fault (read access)
-+ *   16: Protection fault (write access)
-+ *   20: Page not found (instruction access)
-+ *   24: Page not found (read access)
-+ *   28: Page not found (write access)
-  */
- asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
- {
-@@ -88,10 +61,11 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
- 	const struct exception_table_entry *fixup;
- 	unsigned long address;
- 	unsigned long page;
--	int writeaccess = 0;
-+	int writeaccess;
-+	long signr;
-+	int code;
- 
--	if (notify_page_fault(DIE_PAGE_FAULT, regs,
--			      ecr, SIGSEGV) == NOTIFY_STOP)
-+	if (notify_page_fault(regs, ecr))
- 		return;
- 
- 	address = sysreg_read(TLBEAR);
-@@ -99,6 +73,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
- 	tsk = current;
- 	mm = tsk->mm;
- 
-+	signr = SIGSEGV;
-+	code = SEGV_MAPERR;
-+
- 	/*
- 	 * If we're in an interrupt or have no user context, we must
- 	 * not take the fault...
-@@ -125,7 +102,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
- 	 * can handle it...
- 	 */
- good_area:
--	//pr_debug("good area: vm_flags = 0x%lx\n", vma->vm_flags);
-+	code = SEGV_ACCERR;
-+	writeaccess = 0;
-+
- 	switch (ecr) {
- 	case ECR_PROTECTION_X:
- 	case ECR_TLB_MISS_X:
-@@ -176,46 +155,24 @@ survive:
- 	 * map. Fix it, but check if it's kernel or user first...
- 	 */
- bad_area:
--	pr_debug("Bad area [%s:%u]: addr %08lx, ecr %lu\n",
--		 tsk->comm, tsk->pid, address, ecr);
--
- 	up_read(&mm->mmap_sem);
- 
- 	if (user_mode(regs)) {
--		/* Hmm...we have to pass address and ecr somehow... */
--		/* tsk->thread.address = address;
--		   tsk->thread.error_code = ecr; */
--#ifdef DEBUG
--		show_regs(regs);
--		dump_code(regs->pc);
--
--		page = sysreg_read(PTBR);
--		printk("ptbr = %08lx", page);
--		if (page) {
--			page = ((unsigned long *)page)[address >> 22];
--			printk(" pgd = %08lx", page);
--			if (page & _PAGE_PRESENT) {
--				page &= PAGE_MASK;
--				address &= 0x003ff000;
--				page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT];
--				printk(" pte = %08lx\n", page);
--			}
--		}
--#endif
--		pr_debug("Sending SIGSEGV to PID %d...\n",
--			tsk->pid);
--		force_sig(SIGSEGV, tsk);
-+		if (exception_trace && printk_ratelimit())
-+			printk("%s%s[%d]: segfault at %08lx pc %08lx "
-+			       "sp %08lx ecr %lu\n",
-+			       is_init(tsk) ? KERN_EMERG : KERN_INFO,
-+			       tsk->comm, tsk->pid, address, regs->pc,
-+			       regs->sp, ecr);
-+		_exception(SIGSEGV, regs, code, address);
- 		return;
- 	}
- 
- no_context:
--	pr_debug("No context\n");
--
- 	/* Are we prepared to handle this kernel fault? */
- 	fixup = search_exception_tables(regs->pc);
- 	if (fixup) {
- 		regs->pc = fixup->fixup;
--		pr_debug("Found fixup at %08lx\n", fixup->fixup);
- 		return;
- 	}
- 
-@@ -230,7 +187,6 @@ no_context:
- 		printk(KERN_ALERT
- 		       "Unable to handle kernel paging request");
- 	printk(" at virtual address %08lx\n", address);
--	printk(KERN_ALERT "pc = %08lx\n", regs->pc);
- 
- 	page = sysreg_read(PTBR);
- 	printk(KERN_ALERT "ptbr = %08lx", page);
-@@ -241,20 +197,20 @@ no_context:
- 			page &= PAGE_MASK;
- 			address &= 0x003ff000;
- 			page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT];
--			printk(" pte = %08lx\n", page);
-+			printk(" pte = %08lx", page);
- 		}
- 	}
--	die("\nOops", regs, ecr);
--	do_exit(SIGKILL);
-+	printk("\n");
-+	die("Kernel access of bad area", regs, signr);
-+	return;
- 
- 	/*
- 	 * We ran out of memory, or some other thing happened to us
- 	 * that made us unable to handle the page fault gracefully.
- 	 */
- out_of_memory:
--	printk("Out of memory\n");
- 	up_read(&mm->mmap_sem);
--	if (current->pid == 1) {
-+	if (is_init(current)) {
- 		yield();
- 		down_read(&mm->mmap_sem);
- 		goto survive;
-@@ -267,21 +223,20 @@ out_of_memory:
- do_sigbus:
- 	up_read(&mm->mmap_sem);
- 
--	/*
--	 * Send a sigbus, regardless of whether we were in kernel or
--	 * user mode.
--	 */
--	/* address, error_code, trap_no, ... */
--#ifdef DEBUG
--	show_regs(regs);
--	dump_code(regs->pc);
--#endif
--	pr_debug("Sending SIGBUS to PID %d...\n", tsk->pid);
--	force_sig(SIGBUS, tsk);
--
- 	/* Kernel mode? Handle exceptions or die */
-+	signr = SIGBUS;
-+	code = BUS_ADRERR;
- 	if (!user_mode(regs))
- 		goto no_context;
-+
-+	if (exception_trace)
-+		printk("%s%s[%d]: bus error at %08lx pc %08lx "
-+		       "sp %08lx ecr %lu\n",
-+		       is_init(tsk) ? KERN_EMERG : KERN_INFO,
-+		       tsk->comm, tsk->pid, address, regs->pc,
-+		       regs->sp, ecr);
-+
-+	_exception(SIGBUS, regs, BUS_ADRERR, address);
- }
- 
- asmlinkage void do_bus_error(unsigned long addr, int write_access,
-@@ -292,8 +247,7 @@ asmlinkage void do_bus_error(unsigned long addr, int write_access,
- 	       addr, write_access ? "write" : "read");
- 	printk(KERN_INFO "DTLB dump:\n");
- 	dump_dtlb();
--	die("Bus Error", regs, write_access);
--	do_exit(SIGKILL);
-+	die("Bus Error", regs, SIGKILL);
- }
- 
- /*
-diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
-index 70da689..82cf708 100644
---- a/arch/avr32/mm/init.c
-+++ b/arch/avr32/mm/init.c
-@@ -10,11 +10,9 @@
- #include <linux/mm.h>
- #include <linux/swap.h>
- #include <linux/init.h>
--#include <linux/initrd.h>
- #include <linux/mmzone.h>
- #include <linux/bootmem.h>
- #include <linux/pagemap.h>
--#include <linux/pfn.h>
- #include <linux/nodemask.h>
- 
- #include <asm/page.h>
-@@ -78,242 +76,6 @@ void show_mem(void)
- 	printk ("%d pages swap cached\n", cached);
- }
- 
--static void __init print_memory_map(const char *what,
--				    struct tag_mem_range *mem)
--{
--	printk ("%s:\n", what);
--	for (; mem; mem = mem->next) {
--		printk ("  %08lx - %08lx\n",
--			(unsigned long)mem->addr,
--			(unsigned long)(mem->addr + mem->size));
--	}
--}
--
--#define MAX_LOWMEM	HIGHMEM_START
--#define MAX_LOWMEM_PFN	PFN_DOWN(MAX_LOWMEM)
--
--/*
-- * Sort a list of memory regions in-place by ascending address.
-- *
-- * We're using bubble sort because we only have singly linked lists
-- * with few elements.
-- */
--static void __init sort_mem_list(struct tag_mem_range **pmem)
--{
--	int done;
--	struct tag_mem_range **a, **b;
--
--	if (!*pmem)
--		return;
--
--	do {
--		done = 1;
--		a = pmem, b = &(*pmem)->next;
--		while (*b) {
--			if ((*a)->addr > (*b)->addr) {
--				struct tag_mem_range *tmp;
--				tmp = (*b)->next;
--				(*b)->next = *a;
--				*a = *b;
--				*b = tmp;
--				done = 0;
--			}
--			a = &(*a)->next;
--			b = &(*a)->next;
--		}
--	} while (!done);
--}
--
--/*
-- * Find a free memory region large enough for storing the
-- * bootmem bitmap.
-- */
--static unsigned long __init
--find_bootmap_pfn(const struct tag_mem_range *mem)
--{
--	unsigned long bootmap_pages, bootmap_len;
--	unsigned long node_pages = PFN_UP(mem->size);
--	unsigned long bootmap_addr = mem->addr;
--	struct tag_mem_range *reserved = mem_reserved;
--	struct tag_mem_range *ramdisk = mem_ramdisk;
--	unsigned long kern_start = virt_to_phys(_stext);
--	unsigned long kern_end = virt_to_phys(_end);
--
--	bootmap_pages = bootmem_bootmap_pages(node_pages);
--	bootmap_len = bootmap_pages << PAGE_SHIFT;
--
--	/*
--	 * Find a large enough region without reserved pages for
--	 * storing the bootmem bitmap. We can take advantage of the
--	 * fact that all lists have been sorted.
--	 *
--	 * We have to check explicitly reserved regions as well as the
--	 * kernel image and any RAMDISK images...
--	 *
--	 * Oh, and we have to make sure we don't overwrite the taglist
--	 * since we're going to use it until the bootmem allocator is
--	 * fully up and running.
--	 */
--	while (1) {
--		if ((bootmap_addr < kern_end) &&
--		    ((bootmap_addr + bootmap_len) > kern_start))
--			bootmap_addr = kern_end;
--
--		while (reserved &&
--		       (bootmap_addr >= (reserved->addr + reserved->size)))
--			reserved = reserved->next;
--
--		if (reserved &&
--		    ((bootmap_addr + bootmap_len) >= reserved->addr)) {
--			bootmap_addr = reserved->addr + reserved->size;
--			continue;
--		}
--
--		while (ramdisk &&
--		       (bootmap_addr >= (ramdisk->addr + ramdisk->size)))
--			ramdisk = ramdisk->next;
--
--		if (!ramdisk ||
--		    ((bootmap_addr + bootmap_len) < ramdisk->addr))
--			break;
--
--		bootmap_addr = ramdisk->addr + ramdisk->size;
--	}
--
--	if ((PFN_UP(bootmap_addr) + bootmap_len) >= (mem->addr + mem->size))
--		return ~0UL;
--
--	return PFN_UP(bootmap_addr);
--}
--
--void __init setup_bootmem(void)
--{
--	unsigned bootmap_size;
--	unsigned long first_pfn, bootmap_pfn, pages;
--	unsigned long max_pfn, max_low_pfn;
--	unsigned long kern_start = virt_to_phys(_stext);
--	unsigned long kern_end = virt_to_phys(_end);
--	unsigned node = 0;
--	struct tag_mem_range *bank, *res;
--
--	sort_mem_list(&mem_phys);
--	sort_mem_list(&mem_reserved);
--
--	print_memory_map("Physical memory", mem_phys);
--	print_memory_map("Reserved memory", mem_reserved);
--
--	nodes_clear(node_online_map);
--
--	if (mem_ramdisk) {
--#ifdef CONFIG_BLK_DEV_INITRD
--		initrd_start = (unsigned long)__va(mem_ramdisk->addr);
--		initrd_end = initrd_start + mem_ramdisk->size;
--
--		print_memory_map("RAMDISK images", mem_ramdisk);
--		if (mem_ramdisk->next)
--			printk(KERN_WARNING
--			       "Warning: Only the first RAMDISK image "
--			       "will be used\n");
--		sort_mem_list(&mem_ramdisk);
--#else
--		printk(KERN_WARNING "RAM disk image present, but "
--		       "no initrd support in kernel!\n");
--#endif
--	}
--
--	if (mem_phys->next)
--		printk(KERN_WARNING "Only using first memory bank\n");
--
--	for (bank = mem_phys; bank; bank = NULL) {
--		first_pfn = PFN_UP(bank->addr);
--		max_low_pfn = max_pfn = PFN_DOWN(bank->addr + bank->size);
--		bootmap_pfn = find_bootmap_pfn(bank);
--		if (bootmap_pfn > max_pfn)
--			panic("No space for bootmem bitmap!\n");
--
--		if (max_low_pfn > MAX_LOWMEM_PFN) {
--			max_low_pfn = MAX_LOWMEM_PFN;
--#ifndef CONFIG_HIGHMEM
--			/*
--			 * Lowmem is memory that can be addressed
--			 * directly through P1/P2
--			 */
--			printk(KERN_WARNING
--			       "Node %u: Only %ld MiB of memory will be used.\n",
--			       node, MAX_LOWMEM >> 20);
--			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
--#else
--#error HIGHMEM is not supported by AVR32 yet
--#endif
--		}
--
--		/* Initialize the boot-time allocator with low memory only. */
--		bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
--						 first_pfn, max_low_pfn);
--
--		printk("Node %u: bdata = %p, bdata->node_bootmem_map = %p\n",
--		       node, NODE_DATA(node)->bdata,
--		       NODE_DATA(node)->bdata->node_bootmem_map);
--
--		/*
--		 * Register fully available RAM pages with the bootmem
--		 * allocator.
--		 */
--		pages = max_low_pfn - first_pfn;
--		free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
--				   PFN_PHYS(pages));
--
--		/*
--		 * Reserve space for the kernel image (if present in
--		 * this node)...
--		 */
--		if ((kern_start >= PFN_PHYS(first_pfn)) &&
--		    (kern_start < PFN_PHYS(max_pfn))) {
--			printk("Node %u: Kernel image %08lx - %08lx\n",
--			       node, kern_start, kern_end);
--			reserve_bootmem_node(NODE_DATA(node), kern_start,
--					     kern_end - kern_start);
--		}
--
--		/* ...the bootmem bitmap... */
--		reserve_bootmem_node(NODE_DATA(node),
--				     PFN_PHYS(bootmap_pfn),
--				     bootmap_size);
--
--		/* ...any RAMDISK images... */
--		for (res = mem_ramdisk; res; res = res->next) {
--			if (res->addr > PFN_PHYS(max_pfn))
--				break;
--
--			if (res->addr >= PFN_PHYS(first_pfn)) {
--				printk("Node %u: RAMDISK %08lx - %08lx\n",
--				       node,
--				       (unsigned long)res->addr,
--				       (unsigned long)(res->addr + res->size));
--				reserve_bootmem_node(NODE_DATA(node),
--						     res->addr, res->size);
--			}
--		}
--
--		/* ...and any other reserved regions. */
--		for (res = mem_reserved; res; res = res->next) {
--			if (res->addr > PFN_PHYS(max_pfn))
--				break;
--
--			if (res->addr >= PFN_PHYS(first_pfn)) {
--				printk("Node %u: Reserved %08lx - %08lx\n",
--				       node,
--				       (unsigned long)res->addr,
--				       (unsigned long)(res->addr + res->size));
--				reserve_bootmem_node(NODE_DATA(node),
--						     res->addr, res->size);
--			}
--		}
--
--		node_set_online(node);
--	}
--}
--
- /*
-  * paging_init() sets up the page tables
-  *
-diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
-index e812aa1..84d9847 100644
---- a/drivers/char/watchdog/Kconfig
-+++ b/drivers/char/watchdog/Kconfig
-@@ -183,6 +183,26 @@ config PNX4008_WATCHDOG
- 
- 	  Say N if you are unsure.
- 
-+# AVR32 Architecture
-+
-+config AT32AP700X_WDT
-+	tristate "AT32AP700x watchdog"
-+	depends on WATCHDOG && CPU_AT32AP7000
-+	help
-+	  Watchdog timer embedded into AT32AP700x devices. This will reboot
-+	  your system when the timeout is reached.
-+
-+config AT32AP700X_WDT_TIMEOUT
-+	int "Timeout value for AT32AP700x watchdog"
-+	depends on AT32AP700X_WDT
-+	default "2"
-+	range 1 2
-+	help
-+	  Sets the timeout value for the watchdog in AT32AP700x devices.
-+	  Limited by hardware to be 1 or 2 seconds.
-+
-+	  Set to 2 seconds by default.
-+
- # X86 (i386 + ia64 + x86_64) Architecture
- 
- config ACQUIRE_WDT
-diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
-index 2cd8ff8..8b2a530 100644
---- a/drivers/char/watchdog/Makefile
-+++ b/drivers/char/watchdog/Makefile
-@@ -35,6 +35,9 @@ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
- obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
- obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
- 
-+# AVR32 Architecture
-+obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
-+
- # X86 (i386 + ia64 + x86_64) Architecture
- obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
- obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
-diff --git a/drivers/char/watchdog/at32ap700x_wdt.c b/drivers/char/watchdog/at32ap700x_wdt.c
-new file mode 100644
-index 0000000..789456d
---- /dev/null
-+++ b/drivers/char/watchdog/at32ap700x_wdt.c
-@@ -0,0 +1,312 @@
-+/*
-+ * Watchdog driver for Atmel AT32AP700X devices
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/platform_device.h>
-+#include <linux/watchdog.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+
-+#define TIMEOUT_MIN		1
-+#define TIMEOUT_DEFAULT		CONFIG_AT32AP700X_WDT_TIMEOUT
-+#define TIMEOUT_MAX		2
-+
-+/* Watchdog registers and write/read macro */
-+#define	WDT_CTRL		0x00
-+#define WDT_CTRL_EN		   0
-+#define WDT_CTRL_PSEL		   8
-+#define WDT_CTRL_KEY		  24
-+
-+#define WDT_CLR			0x04
-+
-+#define WDT_BIT(name)		(1 << WDT_##name)
-+#define WDT_BF(name,value)	((value) << WDT_##name)
-+
-+#define wdt_readl(dev,reg)				\
-+	__raw_readl((dev)->regs + WDT_##reg)
-+#define wdt_writel(dev,reg,value)			\
-+	__raw_writel((value), (dev)->regs + WDT_##reg)
-+
-+struct wdt_at32ap700x {
-+	void __iomem	*regs;
-+	int		timeout;
-+	int		users;
-+};
-+
-+static struct wdt_at32ap700x *wdt;
-+
-+/*
-+ * Disable the watchdog.
-+ */
-+static void inline at32_wdt_stop(void)
-+{
-+	unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
-+	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
-+	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
-+}
-+
-+/*
-+ * Enable and reset the watchdog.
-+ */
-+static void inline at32_wdt_start(void)
-+{
-+	/* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-+	unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
-+
-+	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+			| WDT_BF(CTRL_PSEL, psel)
-+			| WDT_BF(CTRL_KEY, 0x55));
-+	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+			| WDT_BF(CTRL_PSEL, psel)
-+			| WDT_BF(CTRL_KEY, 0xaa));
-+}
-+
-+/*
-+ * Pat the watchdog timer.
-+ */
-+static void inline at32_wdt_pat(void)
-+{
-+	wdt_writel(wdt, CLR, 0x42);
-+}
-+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at32_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(1, &wdt->users))
-+		return -EBUSY;
-+
-+	at32_wdt_start();
-+	return nonseekable_open(inode, file);
-+}
-+
-+/*
-+ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
-+ * the watchdog is also disabled.
-+ */
-+static int at32_wdt_close(struct inode *inode, struct file *file)
-+{
-+#ifndef CONFIG_WATCHDOG_NOWAYOUT
-+	at32_wdt_stop();
-+#endif
-+	clear_bit(1, &wdt->users);
-+	return 0;
-+}
-+
-+/*
-+ * Change the watchdog time interval.
-+ */
-+static int at32_wdt_settimeout(int time)
-+{
-+	/*
-+	 * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
-+	 * 2 ^ 16 allowing up to 2 seconds timeout.
-+	 */
-+	if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
-+		return -EINVAL;
-+
-+	/* Set new watchdog time. It will be used when at32_wdt_start() is called. */
-+	wdt->timeout = time;
-+	return 0;
-+}
-+
-+static struct watchdog_info at32_wdt_info = {
-+	.identity	= "at32ap700x watchdog",
-+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+};
-+
-+/*
-+ * Handle commands from user-space.
-+ */
-+static int at32_wdt_ioctl(struct inode *inode, struct file *file,
-+		unsigned int cmd, unsigned long arg)
-+{
-+	int ret = -ENOTTY;
-+	int time;
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = argp;
-+
-+	switch(cmd) {
-+	case WDIOC_KEEPALIVE:
-+		at32_wdt_pat();
-+		ret = 0;
-+		break;
-+	case WDIOC_GETSUPPORT:
-+		ret = copy_to_user(argp, &at32_wdt_info,
-+				sizeof(at32_wdt_info)) ? -EFAULT : 0;
-+		break;
-+	case WDIOC_SETTIMEOUT:
-+		ret = get_user(time, p);
-+		if (ret)
-+			break;
-+		ret = at32_wdt_settimeout(time);
-+		if (ret)
-+			break;
-+		/* Enable new time value */
-+		at32_wdt_start();
-+		/* fall through */
-+	case WDIOC_GETTIMEOUT:
-+		ret = put_user(wdt->timeout, p);
-+		break;
-+	case WDIOC_GETSTATUS: /* fall through */
-+	case WDIOC_GETBOOTSTATUS:
-+		ret = put_user(0, p);
-+		break;
-+	case WDIOC_SETOPTIONS:
-+		ret = get_user(time, p);
-+		if (ret)
-+			break;
-+		if (time & WDIOS_DISABLECARD)
-+			at32_wdt_stop();
-+		if (time & WDIOS_ENABLECARD)
-+			at32_wdt_start();
-+		ret = 0;
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-+{
-+	at32_wdt_pat();
-+	return len;
-+}
-+
-+static const struct file_operations at32_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.ioctl		= at32_wdt_ioctl,
-+	.open		= at32_wdt_open,
-+	.release	= at32_wdt_close,
-+	.write		= at32_wdt_write,
-+};
-+
-+static struct miscdevice at32_wdt_miscdev = {
-+	.minor		= WATCHDOG_MINOR,
-+	.name		= "watchdog",
-+	.fops		= &at32_wdt_fops,
-+};
-+
-+static int __init at32_wdt_probe(struct platform_device *pdev)
-+{
-+	struct resource	*regs;
-+	int ret;
-+
-+	wdt = kmalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
-+	if (!wdt) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		pr_debug(KERN_ERR "wdt: no mmio resource defined for WDT\n");
-+		ret = -ENXIO;
-+		goto out;
-+	}
-+
-+	wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	wdt->users = 0;
-+
-+	if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
-+		at32_wdt_settimeout(TIMEOUT_MAX);
-+		pr_info("at32_wdt: timeout invalid, set to %d sec.\n",
-+				TIMEOUT_MAX);
-+	}
-+
-+	if (at32_wdt_miscdev.parent)
-+		return -EBUSY;
-+	at32_wdt_miscdev.parent = &pdev->dev;
-+
-+	ret = misc_register(&at32_wdt_miscdev);
-+	if (ret)
-+		return ret;
-+
-+	printk(KERN_INFO "Atmel WDT for AT32AP700X at %08lx\n",
-+			(unsigned long)wdt->regs);
-+	return 0;
-+
-+out:
-+	if (wdt)
-+		kfree(wdt);
-+	return ret;
-+}
-+
-+static int __exit at32_wdt_remove(struct platform_device *pdev)
-+{
-+	int ret;
-+
-+	ret = misc_deregister(&at32_wdt_miscdev);
-+	if (!ret)
-+		at32_wdt_miscdev.parent = NULL;
-+
-+	if (wdt)
-+		kfree(wdt);
-+
-+	return ret;
-+}
-+
-+static void at32_wdt_shutdown(struct platform_device *pdev)
-+{
-+	at32_wdt_stop();
-+}
-+
-+#ifdef CONFIG_PM
-+static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
-+{
-+	at32_wdt_stop();
-+	return 0;
-+}
-+
-+static int at32_wdt_resume(struct platform_device *pdev)
-+{
-+	if (wdt->users)
-+		at32_wdt_start();
-+	return 0;
-+}
-+#endif
-+
-+static struct platform_driver at32_wdt_driver = {
-+	.remove		= __exit_p(at32_wdt_remove),
-+#ifdef CONFIG_PM
-+	.suspend	= at32_wdt_suspend,
-+	.resume		= at32_wdt_resume,
-+#endif
-+	.driver		= {
-+		.name	= "wdt",
-+		.owner	= THIS_MODULE,
-+	},
-+	.shutdown	= at32_wdt_shutdown,
-+};
-+
-+static int __init at32_wdt_init(void)
-+{
-+	return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
-+}
-+module_init(at32_wdt_init);
-+
-+static void __exit at32_wdt_exit(void)
-+{
-+	platform_driver_unregister(&at32_wdt_driver);
-+}
-+module_exit(at32_wdt_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index ece31d2..a77c24b 100644
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -5,6 +5,26 @@
- menu "I2C Hardware Bus support"
- 	depends on I2C
- 
-+config I2C_ATMELTWI
-+	tristate "Atmel TWI/I2C"
-+	depends on I2C
-+	help
-+	  Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+	  AT91-based device and want to use its built-in TWI
-+	  functionality. Atmel's TWI is compatible with Philips' I2C
-+	  protocol. If in doubt, say NO
-+
-+config I2C_ATMELTWI_BAUDRATE
-+	prompt "Atmel TWI baudrate"
-+	depends on I2C_ATMELTWI
-+	int
-+	default 100000
-+	help
-+	  Set the TWI/I2C baudrate. This will alter the default value. A
-+	  different baudrate can be set by using a module parameter as well. If
-+	  no parameter is provided when loading, this is the value that will be
-+	  used.
-+
- config I2C_ALI1535
- 	tristate "ALI 1535"
- 	depends on I2C && PCI
-@@ -102,6 +122,14 @@ config I2C_ELEKTOR
- 	  This support is also available as a module.  If so, the module 
- 	  will be called i2c-elektor.
- 
-+config I2C_GPIO
-+	tristate "GPIO-based bitbanging I2C"
-+	depends on GENERIC_GPIO
-+	select I2C_ALGOBIT
-+	help
-+	  This is a very simple bitbanging I2C driver utilizing the
-+	  arch-neutral GPIO API to control the SCL and SDA lines.
-+
- config I2C_HYDRA
- 	tristate "CHRP Apple Hydra Mac I/O I2C interface"
- 	depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index 290b540..604fe49 100644
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
- obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
- obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
- obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
-+obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
- obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
- obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
- obj-$(CONFIG_I2C_I810)		+= i2c-i810.o
-@@ -48,6 +49,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
- obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
- obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI)	+= i2c-atmeltwi.o
- 
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
-diff --git a/drivers/i2c/busses/atmeltwi.h b/drivers/i2c/busses/atmeltwi.h
-new file mode 100644
-index 0000000..8502ea6
---- /dev/null
-+++ b/drivers/i2c/busses/atmeltwi.h
-@@ -0,0 +1,117 @@
-+/*
-+ * Register definitions for the Atmel Two-Wire Interface
-+ */
-+
-+#ifndef __ASM_AVR32_TWI_H__
-+#define __ASM_AVR32_TWI_H__
-+
-+/* TWI register offsets */
-+#define TWI_CR					0x0000
-+#define TWI_MMR					0x0004
-+#define TWI_SMR					0x0008
-+#define TWI_IADR				0x000c
-+#define TWI_CWGR				0x0010
-+#define TWI_SR					0x0020
-+#define TWI_IER					0x0024
-+#define TWI_IDR					0x0028
-+#define TWI_IMR					0x002c
-+#define TWI_RHR					0x0030
-+#define TWI_THR					0x0034
-+
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET			0
-+#define TWI_START_SIZE				1
-+#define TWI_STOP_OFFSET				1
-+#define TWI_STOP_SIZE				1
-+#define TWI_MSEN_OFFSET				2
-+#define TWI_MSEN_SIZE				1
-+#define TWI_MSDIS_OFFSET			3
-+#define TWI_MSDIS_SIZE				1
-+#define TWI_SVEN_OFFSET				4
-+#define TWI_SVEN_SIZE				1
-+#define TWI_SVDIS_OFFSET			5
-+#define TWI_SVDIS_SIZE				1
-+#define TWI_SWRST_OFFSET			7
-+#define TWI_SWRST_SIZE				1
-+
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET			8
-+#define TWI_IADRSZ_SIZE				2
-+#define TWI_MREAD_OFFSET			12
-+#define TWI_MREAD_SIZE				1
-+#define TWI_DADR_OFFSET				16
-+#define TWI_DADR_SIZE				7
-+
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET				16
-+#define TWI_SADR_SIZE				7
-+
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET				0
-+#define TWI_IADR_SIZE				24
-+
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET			0
-+#define TWI_CLDIV_SIZE				8
-+#define TWI_CHDIV_OFFSET			8
-+#define TWI_CHDIV_SIZE				8
-+#define TWI_CKDIV_OFFSET			16
-+#define TWI_CKDIV_SIZE				3
-+
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET			0
-+#define TWI_TXCOMP_SIZE				1
-+#define TWI_RXRDY_OFFSET			1
-+#define TWI_RXRDY_SIZE				1
-+#define TWI_TXRDY_OFFSET			2
-+#define TWI_TXRDY_SIZE				1
-+#define TWI_SVDIR_OFFSET			3
-+#define TWI_SVDIR_SIZE				1
-+#define TWI_SVACC_OFFSET			4
-+#define TWI_SVACC_SIZE				1
-+#define TWI_GCACC_OFFSET			5
-+#define TWI_GCACC_SIZE				1
-+#define TWI_OVRE_OFFSET				6
-+#define TWI_OVRE_SIZE				1
-+#define TWI_UNRE_OFFSET				7
-+#define TWI_UNRE_SIZE				1
-+#define TWI_NACK_OFFSET				8
-+#define TWI_NACK_SIZE				1
-+#define TWI_ARBLST_OFFSET			9
-+#define TWI_ARBLST_SIZE				1
-+
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET			0
-+#define TWI_RXDATA_SIZE				8
-+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET			0
-+#define TWI_TXDATA_SIZE				8
-+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR			0
-+#define TWI_IADRSZ_ONE_BYTE			1
-+#define TWI_IADRSZ_TWO_BYTES			2
-+#define TWI_IADRSZ_THREE_BYTES			3
-+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name)					\
-+	(1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name,value)				\
-+	(((value) & ((1 << TWI_##name##_SIZE) - 1))	\
-+	 << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name,value)				\
-+	(((value) >> TWI_##name##_OFFSET)		\
-+	 & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name,value,old)			\
-+	(((old) & ~(((1 << TWI_##name##_SIZE) - 1)	\
-+		    << TWI_##name##_OFFSET))		\
-+	 | TWI_BF(name,value))
-+
-+/* Register access macros */
-+#define twi_readl(port,reg)				\
-+	__raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port,reg,value)			\
-+	__raw_writel((value), (port)->regs + TWI_##reg)
-+
-+#endif /* __ASM_AVR32_TWI_H__ */
-diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
-new file mode 100644
-index 0000000..3418465
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.c
-@@ -0,0 +1,348 @@
-+/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
-+ *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes <ekrangnes at atmel.com>
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <asm/io.h>
-+#include <linux/time.h>
-+#include "atmeltwi.h"
-+
-+static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
-+
-+
-+struct atmel_twi {
-+	void __iomem *regs;
-+	struct i2c_adapter adapter;
-+	struct clk *pclk;
-+	spinlock_t lock;
-+	struct completion comp;
-+	u32 intmask;
-+	u8 *buf;
-+	u8 len;
-+	u8 acks_left;
-+	unsigned int irq;
-+
-+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
-+
-+/*
-+ * Initialize the TWI hardware registers.
-+ */
-+static int __devinit twi_hwinit(struct atmel_twi *twi)
-+{
-+	unsigned long cdiv, ckdiv=0;
-+
-+	twi_writel(twi, IDR, ~0UL);
-+	twi_writel(twi, CR, TWI_BIT(SWRST));	/*Reset peripheral*/
-+	twi_readl(twi, SR);
-+
-+	cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
-+
-+	while (cdiv > 255) {
-+		ckdiv++;
-+		cdiv = cdiv >> 1;
-+	}
-+
-+	if (ckdiv > 7)
-+		return -EINVAL;
-+	else
-+		twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
-+			       | TWI_BF(CHDIV, cdiv)
-+			       | TWI_BF(CLDIV, cdiv)));
-+	return 0;
-+}
-+
-+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out (~100ms).
-+ */
-+static short twi_wait_for_completion(struct atmel_twi *twi,
-+		u32 mask)
-+{
-+	int timeout = msecs_to_jiffies(100);
-+
-+	twi->intmask = mask;
-+	init_completion(&twi->comp);
-+
-+	twi_writel(twi, IER, mask);
-+
-+	if(!wait_for_completion_timeout(&twi->comp, timeout))
-+		return -ETIMEDOUT;
-+
-+	return 0;
-+}
-+
-+/*
-+ * Generic i2c master transfer entrypoint.
-+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
-+{
-+	struct atmel_twi *twi = to_atmel_twi(adap);
-+	struct i2c_msg *pmsg;
-+	int i;
-+
-+	/* get first message */
-+	pmsg = msgs;
-+
-+	dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
-+
-+	for (i = 0; i < num; i++, pmsg++) {
-+
-+		twi->len = pmsg->len;
-+		twi->buf = pmsg->buf;
-+		twi->acks_left = pmsg->len;
-+		twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+			(pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+		twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
-+
-+		dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
-+			i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+			pmsg->len > 1 ? "s" : "",
-+			pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
-+
-+		/* enable */
-+		twi_writel(twi, CR, TWI_BIT(MSEN));
-+
-+		if (pmsg->flags & I2C_M_RD) {
-+			twi_writel(twi, CR, TWI_BIT(START));
-+			if ( twi_wait_for_completion(twi,TWI_BIT(RXRDY))==-ETIMEDOUT ) {
-+				dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
-+					twi->acks_left);
-+				return -ETIMEDOUT;
-+			}
-+
-+			/* Send Stop, and Wait until transfer is finished */
-+			if ( twi_wait_for_completion(twi,TWI_BIT(TXCOMP))==-ETIMEDOUT ) {
-+				dev_dbg(&adap->dev, "TXCOMP timeout\n");
-+				return -ETIMEDOUT;
-+			}
-+
-+		} else {
-+			twi_writel(twi, THR, twi->buf[0]);
-+			if ( twi_wait_for_completion(twi,TWI_BIT(TXRDY))==-ETIMEDOUT ) {
-+				dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
-+				twi->acks_left);
-+				return -ETIMEDOUT;
-+			}
-+		}
-+
-+		/* Disable TWI interface */
-+		twi_writel(twi, CR, TWI_BIT(MSDIS));
-+
-+	} /* end cur msg */
-+
-+	return i;
-+}
-+
-+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct atmel_twi *twi = dev_id;
-+	int status = twi_readl(twi, SR);
-+
-+	if (twi->intmask & status){
-+		if (twi->intmask & TWI_BIT(NACK)) {
-+			goto nack;
-+		} else if (twi->intmask & TWI_BIT(RXRDY)){
-+			twi->buf[twi->len - twi->acks_left] = twi_readl(twi,RHR);
-+			if(--twi->acks_left==1)
-+				twi_writel(twi, CR, TWI_BIT(STOP));
-+			if (twi->acks_left==0)
-+				goto complete;
-+		} else if (twi->intmask & TWI_BIT(TXRDY)) {
-+			twi->acks_left--;
-+			if (twi->acks_left==0) {
-+				twi->intmask = TWI_BIT(TXCOMP);
-+				twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+			} else
-+				twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
-+		} else if (twi->intmask & TWI_BIT(TXCOMP)) {
-+			goto complete;
-+		}
-+	}
-+
-+	return IRQ_HANDLED;
-+
-+nack:
-+	printk(KERN_INFO "NACK received!\n");
-+
-+complete:
-+	twi_writel(twi, IDR, ~0UL);
-+	complete(&twi->comp);
-+
-+	return IRQ_HANDLED;
-+
-+}
-+
-+
-+/*
-+ * Return list of supported functionality.
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
-+{
-+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+/* For now, we only handle combined mode (smbus) */
-+static struct i2c_algorithm twi_algorithm = {
-+	.master_xfer	= twi_xfer,
-+	.functionality	= twi_func,
-+};
-+
-+/*
-+ * Main initialization routine.
-+ */
-+static int __devinit twi_probe(struct platform_device *pdev)
-+{
-+	struct atmel_twi *twi;
-+	struct resource *regs;
-+	struct clk *pclk;
-+	struct i2c_adapter *adapter;
-+	int rc, irq;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+
-+	pclk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(pclk))
-+		return PTR_ERR(pclk);
-+	clk_enable(pclk);
-+
-+	rc = -ENOMEM;
-+	twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+	if (!twi) {
-+		dev_err(&pdev->dev, "can't allocate interface!\n");
-+		goto err_alloc_twi;
-+	}
-+
-+	twi->pclk = pclk;
-+	twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!twi->regs)
-+		goto err_ioremap;
-+
-+	irq = platform_get_irq(pdev,0);
-+	rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+	if (rc) {
-+		dev_err(&pdev->dev, "can't bind irq!\n");
-+		goto err_irq;
-+	}
-+	twi->irq = irq;
-+
-+	rc = twi_hwinit(twi);
-+	if (rc) {
-+		dev_err(&pdev->dev, "Unable to set baudrate\n");
-+		goto err_hw_init;
-+	}
-+
-+	adapter = &twi->adapter;
-+	sprintf(adapter->name, "TWI");
-+	adapter->algo = &twi_algorithm;
-+	adapter->class = I2C_CLASS_HWMON;
-+	adapter->dev.parent = &pdev->dev;
-+
-+	platform_set_drvdata(pdev, twi);
-+
-+	rc = i2c_add_adapter(adapter);
-+	if (rc) {
-+		dev_err(&pdev->dev, "Adapter %s registration failed\n",
-+			adapter->name);
-+		goto err_register;
-+	}
-+
-+	dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
-+		 baudrate/1000, (unsigned long)regs->start);
-+
-+	return 0;
-+
-+
-+err_register:
-+	platform_set_drvdata(pdev, NULL);
-+
-+err_hw_init:
-+	free_irq(irq, twi);
-+
-+err_irq:
-+	iounmap(twi->regs);
-+
-+err_ioremap:
-+	kfree(twi);
-+
-+err_alloc_twi:
-+	clk_disable(pclk);
-+	clk_put(pclk);
-+
-+	return rc;
-+}
-+
-+static int __devexit twi_remove(struct platform_device *pdev)
-+{
-+	struct atmel_twi *twi = platform_get_drvdata(pdev);
-+	int res;
-+
-+	platform_set_drvdata(pdev, NULL);
-+	res = i2c_del_adapter(&twi->adapter);
-+	twi_writel(twi, CR, TWI_BIT(MSDIS));
-+	iounmap(twi->regs);
-+	clk_disable(twi->pclk);
-+	clk_put(twi->pclk);
-+	free_irq(twi->irq, twi);
-+	kfree(twi);
-+
-+	return res;
-+}
-+
-+static struct platform_driver twi_driver = {
-+	.probe		= twi_probe,
-+	.remove		= __devexit_p(twi_remove),
-+	.driver		= {
-+		.name	= "atmel_twi",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init atmel_twi_init(void)
-+{
-+	return platform_driver_register(&twi_driver);
-+}
-+
-+static void __exit atmel_twi_exit(void)
-+{
-+	platform_driver_unregister(&twi_driver);
-+}
-+
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
-+
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
-new file mode 100644
-index 0000000..a7dd546
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-gpio.c
-@@ -0,0 +1,215 @@
-+/*
-+ * Bitbanging I2C bus driver using the GPIO API
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-bit.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/gpio.h>
-+
-+/* Toggle SDA by changing the direction of the pin */
-+static void i2c_gpio_setsda_dir(void *data, int state)
-+{
-+	struct i2c_gpio_platform_data *pdata = data;
-+
-+	if (state)
-+		gpio_direction_input(pdata->sda_pin);
-+	else
-+		gpio_direction_output(pdata->sda_pin, 0);
-+}
-+
-+/*
-+ * Toggle SDA by changing the output value of the pin. This is only
-+ * valid for pins configured as open drain (i.e. setting the value
-+ * high effectively turns off the output driver.)
-+ */
-+static void i2c_gpio_setsda_val(void *data, int state)
-+{
-+	struct i2c_gpio_platform_data *pdata = data;
-+
-+	gpio_set_value(pdata->sda_pin, state);
-+}
-+
-+/* Toggle SCL by changing the direction of the pin. */
-+static void i2c_gpio_setscl_dir(void *data, int state)
-+{
-+	struct i2c_gpio_platform_data *pdata = data;
-+
-+	if (state)
-+		gpio_direction_input(pdata->scl_pin);
-+	else
-+		gpio_direction_output(pdata->scl_pin, 0);
-+}
-+
-+/*
-+ * Toggle SCL by changing the output value of the pin. This is used
-+ * for pins that are configured as open drain and for output-only
-+ * pins. The latter case will break the i2c protocol, but it will
-+ * often work in practice.
-+ */
-+static void i2c_gpio_setscl_val(void *data, int state)
-+{
-+	struct i2c_gpio_platform_data *pdata = data;
-+
-+	gpio_set_value(pdata->scl_pin, state);
-+}
-+
-+int i2c_gpio_getsda(void *data)
-+{
-+	struct i2c_gpio_platform_data *pdata = data;
-+
-+	return gpio_get_value(pdata->sda_pin);
-+}
-+
-+int i2c_gpio_getscl(void *data)
-+{
-+	struct i2c_gpio_platform_data *pdata = data;
-+
-+	return gpio_get_value(pdata->scl_pin);
-+}
-+
-+static int __init i2c_gpio_probe(struct platform_device *pdev)
-+{
-+	struct i2c_gpio_platform_data *pdata;
-+	struct i2c_algo_bit_data *bit_data;
-+	struct i2c_adapter *adap;
-+	int ret;
-+
-+	pdata = pdev->dev.platform_data;
-+	if (!pdata)
-+		return -ENXIO;
-+
-+	ret = -ENOMEM;
-+	adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
-+	if (!adap)
-+		goto err_alloc_adap;
-+	bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL);
-+	if (!bit_data)
-+		goto err_alloc_bit_data;
-+
-+	ret = gpio_request(pdata->sda_pin, "sda");
-+	if (ret)
-+		goto err_request_sda;
-+	ret = gpio_request(pdata->scl_pin, "scl");
-+	if (ret)
-+		goto err_request_scl;
-+
-+	if (pdata->sda_is_open_drain) {
-+		gpio_direction_output(pdata->sda_pin, 1);
-+		bit_data->setsda = i2c_gpio_setsda_val;
-+	} else {
-+		gpio_direction_input(pdata->sda_pin);
-+		bit_data->setsda = i2c_gpio_setsda_dir;
-+	}
-+
-+	if (pdata->scl_is_open_drain || pdata->scl_is_output_only) {
-+		gpio_direction_output(pdata->scl_pin, 1);
-+		bit_data->setscl = i2c_gpio_setscl_val;
-+	} else {
-+		gpio_direction_input(pdata->scl_pin);
-+		bit_data->setscl = i2c_gpio_setscl_dir;
-+	}
-+
-+	if (!pdata->scl_is_output_only)
-+		bit_data->getscl = i2c_gpio_getscl;
-+	bit_data->getsda = i2c_gpio_getsda;
-+
-+	if (pdata->udelay)
-+		bit_data->udelay = pdata->udelay;
-+	else if (pdata->scl_is_output_only)
-+		bit_data->udelay = 50;			/* 10 kHz */
-+	else
-+		bit_data->udelay = 5;			/* 100 kHz */
-+
-+	if (pdata->timeout)
-+		bit_data->timeout = pdata->timeout;
-+	else
-+		bit_data->timeout = HZ / 10;		/* 100 ms */
-+
-+	bit_data->data = pdata;
-+
-+	adap->owner = THIS_MODULE;
-+	snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
-+	adap->algo_data = bit_data;
-+	adap->dev.parent = &pdev->dev;
-+
-+	ret = i2c_bit_add_bus(adap);
-+	if (ret)
-+		goto err_add_bus;
-+
-+	platform_set_drvdata(pdev, adap);
-+
-+	dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
-+		 pdata->sda_pin, pdata->scl_pin,
-+		 pdata->scl_is_output_only
-+		 ? ", no clock stretching" : "");
-+
-+	return 0;
-+
-+err_add_bus:
-+	gpio_free(pdata->scl_pin);
-+err_request_scl:
-+	gpio_free(pdata->sda_pin);
-+err_request_sda:
-+	kfree(bit_data);
-+err_alloc_bit_data:
-+	kfree(adap);
-+err_alloc_adap:
-+	return ret;
-+}
-+
-+static int __exit i2c_gpio_remove(struct platform_device *pdev)
-+{
-+	struct i2c_gpio_platform_data *pdata;
-+	struct i2c_adapter *adap;
-+
-+	adap = platform_get_drvdata(pdev);
-+	pdata = pdev->dev.platform_data;
-+
-+	i2c_del_adapter(adap);
-+	gpio_free(pdata->scl_pin);
-+	gpio_free(pdata->sda_pin);
-+	kfree(adap->algo_data);
-+	kfree(adap);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver i2c_gpio_driver = {
-+	.driver		= {
-+		.name	= "i2c-gpio",
-+		.owner	= THIS_MODULE,
-+	},
-+	.remove		= __exit_p(i2c_gpio_remove),
-+};
-+
-+static int __init i2c_gpio_init(void)
-+{
-+	int ret;
-+
-+	ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe);
-+	if (ret)
-+		printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
-+
-+	return ret;
-+}
-+module_init(i2c_gpio_init);
-+
-+static void __exit i2c_gpio_exit(void)
-+{
-+	platform_driver_unregister(&i2c_gpio_driver);
-+}
-+module_exit(i2c_gpio_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
-index 35d998c..a3c7057 100644
---- a/drivers/input/mouse/Kconfig
-+++ b/drivers/input/mouse/Kconfig
-@@ -125,4 +125,19 @@ config MOUSE_HIL
- 	help
- 	  Say Y here to support HIL pointers.
- 
-+config MOUSE_GPIO
-+	tristate "GPIO mouse"
-+	depends on GENERIC_GPIO
-+	help
-+	  This driver simulates a mouse on GPIO lines of various CPUs (and some
-+	  other chips).
-+
-+	  Say Y here if your device has buttons or a simple joystick connected
-+	  directly to GPIO lines. Your board-specific setup logic must also
-+	  provide a platform device and platform data saying which GPIOs are
-+	  used.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called gpio_mouse.
-+
- endif
-diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
-index 21a1de6..5d0fc43 100644
---- a/drivers/input/mouse/Makefile
-+++ b/drivers/input/mouse/Makefile
-@@ -13,5 +13,6 @@ obj-$(CONFIG_MOUSE_PS2)		+= psmouse.o
- obj-$(CONFIG_MOUSE_SERIAL)	+= sermouse.o
- obj-$(CONFIG_MOUSE_HIL)		+= hil_ptr.o
- obj-$(CONFIG_MOUSE_VSXXXAA)	+= vsxxxaa.o
-+obj-$(CONFIG_MOUSE_GPIO)	+= gpio_mouse.o
- 
- psmouse-objs  := psmouse-base.o alps.o logips2pp.o synaptics.o lifebook.o trackpoint.o
-diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
-new file mode 100644
-index 0000000..b7c438e
---- /dev/null
-+++ b/drivers/input/mouse/gpio_mouse.c
-@@ -0,0 +1,305 @@
-+/*
-+ * Driver for simulating a mouse on GPIO lines.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/timer.h>
-+#include <linux/jiffies.h>
-+#include <linux/platform_device.h>
-+#include <linux/input.h>
-+#include <linux/gpio_mouse.h>
-+
-+#include <asm/gpio.h>
-+
-+struct gpio_mouse {
-+	struct input_dev *input;
-+	struct gpio_mouse_platform_data *gpio;
-+	struct timer_list timer;
-+};
-+
-+/*
-+ * Timer function which is run every scan_ms ms when the device is opened. The
-+ * dev input varaible is set to the the input_dev pointer.
-+ */
-+static void gpio_mouse_scan(unsigned long _dev)
-+{
-+	struct input_dev *input = (struct input_dev *)_dev;
-+	struct gpio_mouse *gmouse = input->private;
-+	struct gpio_mouse_platform_data *gpio = gmouse->gpio;
-+	int x, y;
-+
-+	if (gpio->bleft >= 0)
-+		input_report_key(input, BTN_LEFT,
-+				gpio_get_value(gpio->bleft) ^ gpio->polarity);
-+	if (gpio->bmiddle >= 0)
-+		input_report_key(input, BTN_MIDDLE,
-+				gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
-+	if (gpio->bright >= 0)
-+		input_report_key(input, BTN_RIGHT,
-+				gpio_get_value(gpio->bright) ^ gpio->polarity);
-+
-+	x = (gpio_get_value(gpio->right) ^ gpio->polarity)
-+		- (gpio_get_value(gpio->left) ^ gpio->polarity);
-+	y = (gpio_get_value(gpio->down) ^ gpio->polarity)
-+		- (gpio_get_value(gpio->up) ^ gpio->polarity);
-+
-+	input_report_rel(input, REL_X, x);
-+	input_report_rel(input, REL_Y, y);
-+	input_sync(input);
-+
-+	mod_timer(&gmouse->timer, jiffies + msecs_to_jiffies(gpio->scan_ms));
-+}
-+
-+/* Only start the timer when the device is actually in use, i.e. opened. */
-+static int gpio_mouse_open(struct input_dev *input)
-+{
-+	struct gpio_mouse *gmouse = input->private;
-+	struct gpio_mouse_platform_data *gpio = gmouse->gpio;
-+	gmouse->timer.expires = jiffies + msecs_to_jiffies(gpio->scan_ms);
-+	gmouse->timer.data = (unsigned long)input;
-+	add_timer(&gmouse->timer);
-+	return 0;
-+}
-+
-+static void gpio_mouse_close(struct input_dev *input)
-+{
-+	struct gpio_mouse *gmouse = input->private;
-+	del_timer_sync(&gmouse->timer);
-+}
-+
-+static int __init gpio_mouse_probe(struct platform_device *pdev)
-+{
-+	struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
-+	struct gpio_mouse *gmouse;
-+	struct input_dev *input;
-+	int ret;
-+
-+	if (!pdata) {
-+		dev_dbg(&pdev->dev, "no platform data\n");
-+		ret = -ENXIO;
-+		goto out;
-+	}
-+
-+	if (pdata->up < 0 || pdata->down < 0 || pdata->right < 0
-+			|| pdata->left < 0) {
-+		dev_dbg(&pdev->dev, "missing GPIO for directions\n");
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+	if (pdata->scan_ms < 0) {
-+		dev_dbg(&pdev->dev, "invalid scan time\n");
-+		ret = -EINVAL;
-+		goto out;
-+	}
-+
-+	gmouse = kzalloc(sizeof(struct gpio_mouse), GFP_KERNEL);
-+	if (!gmouse) {
-+		dev_dbg(&pdev->dev, "not enought memory for gpio_mouse\n");
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	/* Mouse direction, required. */
-+	ret = gpio_request(pdata->up, "gpio_mouse_up");
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "fail up pin\n");
-+		goto out_gpio_up;
-+	}
-+	ret = gpio_request(pdata->down, "gpio_mouse_down");
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "fail down pin\n");
-+		goto out_gpio_down;
-+	}
-+	ret = gpio_request(pdata->left, "gpio_mouse_left");
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "fail left pin\n");
-+		goto out_gpio_left;
-+	}
-+	ret = gpio_request(pdata->right, "gpio_mouse_right");
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "fail right pin\n");
-+		goto out_gpio_right;
-+	}
-+
-+	gpio_direction_input(pdata->up);
-+	gpio_direction_input(pdata->down);
-+	gpio_direction_input(pdata->left);
-+	gpio_direction_input(pdata->right);
-+
-+	/* Mouse buttons, not required, but should at least have bleft. */
-+	if (pdata->bleft >= 0) {
-+		ret = gpio_request(pdata->bleft, "gpio_mouse_bleft");
-+		if (ret) {
-+			dev_dbg(&pdev->dev, "fail bleft pin\n");
-+			goto out_gpio_bleft;
-+		}
-+		gpio_direction_input(pdata->bleft);
-+	} else {
-+		dev_dbg(&pdev->dev, "no left button defined\n");
-+	}
-+	if (pdata->bmiddle >= 0) {
-+		ret = gpio_request(pdata->bmiddle, "gpio_mouse_bmiddle");
-+		if (ret) {
-+			dev_dbg(&pdev->dev, "fail bmiddle pin\n");
-+			goto out_gpio_bmiddle;
-+		}
-+		gpio_direction_input(pdata->bmiddle);
-+	}
-+	if (pdata->bright >= 0) {
-+		ret = gpio_request(pdata->bright, "gpio_mouse_bright");
-+		if (ret) {
-+			dev_dbg(&pdev->dev, "fail bright pin\n");
-+			goto out_gpio_bright;
-+		}
-+		gpio_direction_input(pdata->bright);
-+	}
-+
-+	input = input_allocate_device();
-+	if (!input) {
-+		dev_dbg(&pdev->dev, "not enough memory for input device\n");
-+		ret = -ENOMEM;
-+		goto out_input_allocate;
-+	}
-+
-+	platform_set_drvdata(pdev, input);
-+
-+	input->name = pdev->name;
-+	/* TODO: change to "input->dev.parent = &pdev->dev;" in the future */
-+	input->cdev.dev = &pdev->dev;
-+	input->private = gmouse;
-+
-+	input->id.bustype = BUS_HOST;
-+	input->id.vendor = 0;
-+	input->id.product = 0;
-+	input->id.version = 0;
-+
-+	input->evbit[0] = BIT(EV_REL);
-+	if (pdata->bleft >= 0 || pdata->bmiddle >= 0 || pdata->bright >= 0) {
-+		input->evbit[0] |= BIT(EV_KEY);
-+
-+		if (pdata->bleft >= 0)
-+			input->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT);
-+		if (pdata->bmiddle >= 0)
-+			input->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_MIDDLE);
-+		if (pdata->bright >= 0)
-+			input->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_RIGHT);
-+	}
-+	input->relbit[0] = BIT(REL_X) | BIT(REL_Y);
-+
-+	input->open = gpio_mouse_open;
-+	input->close = gpio_mouse_close;
-+
-+	gmouse->gpio = pdata;
-+	gmouse->input = input;
-+
-+	/* Init the scan timer. TODO: rewrite to use input-polldev in the future */
-+	init_timer(&gmouse->timer);
-+	gmouse->timer.function = gpio_mouse_scan;
-+
-+	ret = input_register_device(input);
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "could not register input device\n");
-+		goto out_reg_dev;
-+	}
-+
-+	dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
-+			pdata->scan_ms,
-+			pdata->bleft < 0 ? "" : "left ",
-+			pdata->bmiddle < 0 ? "" : "middle ",
-+			pdata->bright < 0 ? "" : "right");
-+
-+	return 0;
-+
-+out_reg_dev:
-+	input_free_device(input);
-+	platform_set_drvdata(pdev, NULL);
-+out_input_allocate:
-+	if (pdata->bright >= 0)
-+		gpio_free(pdata->bright);
-+out_gpio_bright:
-+	if (pdata->bmiddle >= 0)
-+		gpio_free(pdata->bmiddle);
-+out_gpio_bmiddle:
-+	if (pdata->bleft >= 0)
-+		gpio_free(pdata->bleft);
-+out_gpio_bleft:
-+	if (pdata->right >= 0)
-+		gpio_free(pdata->right);
-+out_gpio_right:
-+	if (pdata->left >= 0)
-+		gpio_free(pdata->left);
-+out_gpio_left:
-+	if (pdata->down >= 0)
-+		gpio_free(pdata->down);
-+out_gpio_down:
-+	if (pdata->up >= 0)
-+		gpio_free(pdata->up);
-+out_gpio_up:
-+	kfree(gmouse);
-+out:
-+	return ret;
-+}
-+
-+static int __exit gpio_mouse_remove(struct platform_device *pdev)
-+{
-+	struct input_dev *input = platform_get_drvdata(pdev);
-+	struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
-+	struct gpio_mouse *gmouse = input->private;
-+
-+	if (input)
-+		input_unregister_device(input);
-+
-+	if (pdata->up >= 0)
-+		gpio_free(pdata->up);
-+	if (pdata->down >= 0)
-+		gpio_free(pdata->down);
-+	if (pdata->left >= 0)
-+		gpio_free(pdata->left);
-+	if (pdata->right >= 0)
-+		gpio_free(pdata->right);
-+	if (pdata->bleft >= 0)
-+		gpio_free(pdata->bleft);
-+	if (pdata->bmiddle >= 0)
-+		gpio_free(pdata->bmiddle);
-+	if (pdata->bright >= 0)
-+		gpio_free(pdata->bright);
-+
-+	if (gmouse)
-+		kfree(gmouse);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+
-+struct platform_driver gpio_mouse_device_driver = {
-+	.remove		= __exit_p(gpio_mouse_remove),
-+	.driver		= {
-+		.name	= "gpio_mouse",
-+	}
-+};
-+
-+static int __init gpio_mouse_init(void)
-+{
-+	return platform_driver_probe(&gpio_mouse_device_driver,
-+			gpio_mouse_probe);
-+}
-+module_init(gpio_mouse_init);
-+
-+static void __exit gpio_mouse_exit(void)
-+{
-+	platform_driver_unregister(&gpio_mouse_device_driver);
-+}
-+module_exit(gpio_mouse_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("GPIO mouse driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index 80b199f..b6fb03b 100644
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -122,4 +122,16 @@ config SONY_LAPTOP
- 
- 	  Read <file:Documentation/sony-laptop.txt> for more information.
- 
-+config ATMEL_SSC
-+	tristate "Device driver for Atmel SSC peripheral"
-+	depends on AVR32 || ARCH_AT91
-+	---help---
-+	  This option enables device driver support for Atmel Syncronized
-+	  Serial Communication peripheral (SSC).
-+
-+	  The SSC peripheral supports a wide variety of serial frame based
-+	  communications, i.e. I2S, SPI, etc.
-+
-+	  If unsure, say N.
-+
- endmenu
-diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
-index 7793ccd..03bb556 100644
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -12,3 +12,4 @@ obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
- obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
- obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
- obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
-+obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc/
-diff --git a/drivers/misc/atmel-ssc/Makefile b/drivers/misc/atmel-ssc/Makefile
-new file mode 100644
-index 0000000..8c45446
---- /dev/null
-+++ b/drivers/misc/atmel-ssc/Makefile
-@@ -0,0 +1,3 @@
-+
-+obj-$(CONFIG_ATMEL_SSC) := ssc.o
-+
-diff --git a/drivers/misc/atmel-ssc/ssc.c b/drivers/misc/atmel-ssc/ssc.c
-new file mode 100644
-index 0000000..a13bd6f
---- /dev/null
-+++ b/drivers/misc/atmel-ssc/ssc.c
-@@ -0,0 +1,471 @@
-+/*
-+ * Atmel SSC support
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/ssc.h>
-+#include <linux/err.h>
-+#include <linux/mutex.h>
-+
-+#include <asm/io.h>
-+
-+#define MAX_NR_SSC_DEVICES	4
-+
-+DEFINE_MUTEX(user_mutex);
-+
-+static struct ssc_device ssc_dev[MAX_NR_SSC_DEVICES];
-+
-+/* SSC API */
-+
-+struct ssc_device* ssc_request(unsigned int ssc_num)
-+{
-+	struct ssc_device *ssc;
-+
-+	ssc = &ssc_dev[ssc_num];
-+	if (!ssc)
-+		return ERR_PTR(-ENODEV);
-+
-+	/* Lock, check if we are taken and return BUSY if taken */
-+	mutex_lock(&user_mutex);
-+	if (ssc->user) {
-+		mutex_unlock(&user_mutex);
-+		printk(KERN_ERR
-+		       "%s: attempted to request taken ssc%u module\n",
-+		       ssc->name, ssc_num);
-+		return ERR_PTR(-EBUSY);
-+	}
-+	ssc->user++;
-+	mutex_unlock(&user_mutex);
-+
-+	/* turn on the module */
-+	clk_enable(ssc->clk);
-+
-+	return ssc;
-+}
-+EXPORT_SYMBOL(ssc_request);
-+
-+void ssc_free(struct ssc_device *ssc)
-+{
-+	mutex_lock(&user_mutex);
-+	if (ssc->user) {
-+		ssc->user--;
-+		/* turn off the module */
-+		clk_disable(ssc->clk);
-+	} else {
-+		printk(KERN_WARNING
-+		       "%s: attempted to free already free ssc module\n",
-+		       ssc->name);
-+	}
-+	mutex_unlock(&user_mutex);
-+}
-+EXPORT_SYMBOL(ssc_free);
-+
-+int ssc_set_mode(struct ssc_device *ssc, struct ssc_mode *mode)
-+{
-+	ssc_writel(ssc, CR, SSC_BIT(CR_SWRST));
-+
-+	if (!mode)
-+		return -EINVAL;
-+	if (mode->bauddiv % 2)
-+		return -EINVAL; /* not power of 2 */
-+
-+	switch (mode->mode) {
-+	case ATMEL_SSC_MODE_I2S_MASTER:
-+		if (mode->data_length % 2)
-+			return -EINVAL; /* not power of 2 */
-+
-+		ssc_writel(ssc, CMR, (mode->bauddiv / 2));
-+
-+		/* Continous clock output
-+		 * Starts on falling TF
-+		 * Delay 1 cycle (1 bit)
-+		 */
-+		ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKO, 1)
-+				| SSC_BF(TCMR_START, 4)
-+				| SSC_BF(TCMR_STTDLY, 1)
-+				| SSC_BF(TCMR_PERIOD,
-+					(mode->data_length-1)));
-+		/* Transmitt MSB first
-+		 * Transmit 2 words each transfer
-+		 * Frame starts on negative pulse
-+		 */
-+		ssc_writel(ssc, TFMR,
-+				SSC_BF(TFMR_DATLEN,
-+					(mode->data_length-1))
-+				| SSC_BIT(TFMR_MSBF)
-+				| SSC_BF(TFMR_DATNB, 1)
-+				| SSC_BF(TFMR_FSLEN,
-+					(mode->data_length-1))
-+				| SSC_BF(TFMR_FSOS, 1));
-+		/* Use transmitter clock
-+		 * Invert clock
-+		 * Start on any edge on RF
-+		 * Delay 1 cycle (1 bit)
-+		 */
-+		ssc_writel(ssc, RCMR, SSC_BF(RCMR_CKS, 1)
-+				| SSC_BIT(RCMR_CKI)
-+				| SSC_BF(RCMR_START, 7)
-+				| SSC_BF(RCMR_STTDLY, 1));
-+		/* Receive MSB first */
-+		ssc_writel(ssc, RFMR,
-+				SSC_BF(RFMR_DATLEN, (mode->data_length-1))
-+				| SSC_BIT(RFMR_MSBF));
-+		break;
-+	case ATMEL_SSC_MODE_I2S_SLAVE:
-+		if (mode->data_length % 2)
-+			return -EINVAL; /* not power of 2 */
-+
-+		ssc_writel(ssc, CMR, 0);
-+
-+		/* Continous clock input on TK
-+		 * Starts on any TF edge
-+		 * Delay 1 cycle (1 bit)
-+		 */
-+		ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKS, 2)
-+				| SSC_BF(TCMR_START, 7)
-+				| SSC_BF(TCMR_STTDLY, 1));
-+		/* Transmitt MSB first
-+		 * Transmit 2 words each transfer
-+		 * Frame starts on negative pulse
-+		 */
-+		ssc_writel(ssc, TFMR,
-+				SSC_BF(TFMR_DATLEN,
-+					(mode->data_length-1))
-+				| SSC_BIT(TFMR_MSBF)
-+				| SSC_BF(TFMR_DATNB, 1)
-+				| SSC_BF(TFMR_FSLEN,
-+					(mode->data_length-1))
-+				| SSC_BF(TFMR_FSOS, 1));
-+		/* Continous clock input on RK
-+		 * Start on any RF edge
-+		 * Delay 1 cycle (1 bit)
-+		 */
-+		ssc_writel(ssc, RCMR, SSC_BF(RCMR_CKS, 2)
-+				| SSC_BF(RCMR_START, 7)
-+				| SSC_BF(RCMR_STTDLY, 1));
-+		/* Receive MSB first */
-+		ssc_writel(ssc, RFMR,
-+				SSC_BF(RFMR_DATLEN, (mode->data_length-1))
-+				| SSC_BIT(RFMR_MSBF));
-+		break;
-+	case ATMEL_SSC_MODE_SPI_MASTER:
-+		if (mode->data_length < 8 || mode->data_length > 16)
-+			return -EINVAL;
-+
-+		ssc_writel(ssc, CMR, (mode->bauddiv / 2));
-+
-+		/* Clock during xfer
-+		 * Invert depending on SPI mode
-+		 * Continous clock gating
-+		 */
-+		ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKO, 2)
-+				| SSC_BF(TCMR_CKI, (mode->spi_mode % 2) ? 0 : 1)
-+				| SSC_BF(TCMR_CKG, 1));
-+		/* Transmitt MSB first
-+		 * Frame starts on negative edge
-+		 */
-+		ssc_writel(ssc, TFMR,
-+				SSC_BF(TFMR_DATLEN, (mode->data_length-1))
-+				| SSC_BIT(TFMR_MSBF)
-+				| SSC_BF(TFMR_FSOS, 3));
-+		/* Invert depending on SPI mode
-+		 * Start receive on transmitt
-+		 */
-+		ssc_writel(ssc, RCMR,
-+				SSC_BF(RCMR_CKI, (mode->spi_mode % 2) ? 0 : 1)
-+				| SSC_BF(RCMR_START, 1));
-+		/* Reveice MSB first */
-+		ssc_writel(ssc, RFMR,
-+				SSC_BF(RFMR_DATLEN, (mode->data_length-1))
-+				| SSC_BIT(RFMR_MSBF));
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_set_mode);
-+
-+int ssc_set_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
-+{
-+	if (xfer->data) {
-+		ssc_writel(ssc, PDC_RPR, xfer->data);
-+		ssc_writel(ssc, PDC_RCR, xfer->len);
-+	}
-+	if (xfer->next_data) {
-+		ssc_writel(ssc, PDC_RNPR, xfer->next_data);
-+		ssc_writel(ssc, PDC_RNCR, xfer->next_len);
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_set_rx_buffers);
-+
-+int ssc_get_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
-+{
-+	xfer->data	= ssc_readl(ssc, PDC_RPR);
-+	xfer->len	= ssc_readl(ssc, PDC_RCR);
-+	xfer->next_data	= ssc_readl(ssc, PDC_RNPR);
-+	xfer->next_len	= ssc_readl(ssc, PDC_RNCR);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_get_rx_buffers);
-+
-+int ssc_set_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
-+{
-+	if (xfer->data) {
-+		ssc_writel(ssc, PDC_TPR, xfer->data);
-+		ssc_writel(ssc, PDC_TCR, xfer->len);
-+	}
-+	if (xfer->next_data) {
-+		ssc_writel(ssc, PDC_TNPR, xfer->next_data);
-+		ssc_writel(ssc, PDC_TNCR, xfer->next_len);
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_set_tx_buffers);
-+
-+int ssc_get_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
-+{
-+	xfer->data	= ssc_readl(ssc, PDC_TPR);
-+	xfer->len	= ssc_readl(ssc, PDC_TCR);
-+	xfer->next_data	= ssc_readl(ssc, PDC_TNPR);
-+	xfer->next_len	= ssc_readl(ssc, PDC_TNCR);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_get_tx_buffers);
-+
-+int ssc_enable(struct ssc_device *ssc, char tx, char rx)
-+{
-+	if (tx && rx) {
-+		ssc_writel(ssc, CR, SSC_BIT(CR_TXEN)|SSC_BIT(CR_RXEN));
-+	}
-+	else if (tx) {
-+		ssc_writel(ssc, CR, SSC_BIT(CR_TXEN));
-+	}
-+	else if (rx) {
-+		ssc_writel(ssc, CR, SSC_BIT(CR_RXEN));
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_enable);
-+
-+int ssc_enable_xfer(struct ssc_device *ssc, char tx, char rx)
-+{
-+	if (tx && rx) {
-+		ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN)|SSC_BIT(PDC_PTCR_RXTEN));
-+	}
-+	else if (tx) {
-+		ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
-+	}
-+	else if (rx) {
-+		ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_RXTEN));
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_enable_xfer);
-+
-+int ssc_disable(struct ssc_device *ssc, char tx, char rx)
-+{
-+	if (tx && rx) {
-+		ssc_writel(ssc, CR, SSC_BIT(CR_TXDIS)|SSC_BIT(CR_RXDIS));
-+	}
-+	else if (tx) {
-+		ssc_writel(ssc, CR, SSC_BIT(CR_TXDIS));
-+	}
-+	else if (rx) {
-+		ssc_writel(ssc, CR, SSC_BIT(CR_RXDIS));
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_disable);
-+
-+int ssc_disable_xfer(struct ssc_device *ssc, char tx, char rx)
-+{
-+	if (tx && rx) {
-+		ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS)|SSC_BIT(PDC_PTCR_RXTDIS));
-+	}
-+	else if (tx) {
-+		ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
-+	}
-+	else if (rx) {
-+		ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_RXTDIS));
-+	}
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_disable_xfer);
-+
-+int ssc_enable_int(struct ssc_device *ssc, unsigned int mask)
-+{
-+	long status;
-+
-+	ssc_writel(ssc, IER, mask);
-+
-+	status = ssc_readl(ssc, IMR);
-+
-+	if (!(status & mask))
-+		return -EFAULT;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_enable_int);
-+
-+int ssc_disable_int(struct ssc_device *ssc, unsigned int mask)
-+{
-+	long status;
-+
-+	ssc_writel(ssc, IDR, mask);
-+
-+	status = ssc_readl(ssc, IMR);
-+
-+	if (status ^ ~mask)
-+		return -EFAULT;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_disable_int);
-+
-+int ssc_get_int_mask(struct ssc_device *ssc, unsigned int *mask)
-+{
-+	*mask = ssc_readl(ssc, IMR);
-+	return 0;
-+}
-+EXPORT_SYMBOL(ssc_get_int_mask);
-+
-+int ssc_clk_get_rate(struct ssc_device *ssc)
-+{
-+	return clk_get_rate(ssc->clk);
-+}
-+EXPORT_SYMBOL(ssc_clk_get_rate);
-+
-+int ssc_to_irq(struct ssc_device *ssc)
-+{
-+	return ssc->irq;
-+}
-+EXPORT_SYMBOL(ssc_to_irq);
-+
-+struct ssc_device* irq_to_ssc(unsigned int irq)
-+{
-+	int i;
-+	struct ssc_device *ssc;
-+
-+	for (i = 0; i < MAX_NR_SSC_DEVICES; i++) {
-+		ssc = &ssc_dev[i];
-+		if (ssc && ssc->irq == irq)
-+			return ssc;
-+	}
-+
-+	return ERR_PTR(-ENXIO);
-+}
-+EXPORT_SYMBOL(irq_to_ssc);
-+
-+/* End SSC API */
-+
-+static int __init ssc_probe(struct platform_device *pdev)
-+{
-+	int retval = 0;
-+	struct resource *regs;
-+	struct ssc_device *ssc = NULL;
-+
-+	if (pdev->id > MAX_NR_SSC_DEVICES) {
-+		dev_err(&pdev->dev, "only %d SSC devices supported\n",
-+				MAX_NR_SSC_DEVICES);
-+		retval = -ENODEV;
-+		goto out;
-+	}
-+
-+	ssc = &ssc_dev[pdev->id];
-+	ssc->user = 0;
-+	snprintf(ssc->name, sizeof(ssc->name), "ssc%d", pdev->id);
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_err(&pdev->dev, "no mmio resource defined for %s\n",
-+				ssc->name);
-+		retval = -ENXIO;
-+		goto out;
-+	}
-+
-+	ssc->clk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(ssc->clk)) {
-+		dev_err(&pdev->dev, "no pclk clock defined for %s\n",
-+				ssc->name);
-+		retval = -ENXIO;
-+		goto out;
-+	}
-+
-+	ssc->pdev = pdev;
-+	ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+
-+	mutex_init(&user_mutex);
-+
-+	/* disable all interrupts */
-+	ssc_writel(ssc, IDR, ~0UL);
-+	ssc_readl(ssc, SR);
-+
-+	ssc->irq = platform_get_irq(pdev, 0);
-+	if (!ssc->irq) {
-+		printk(KERN_ERR "%s: no interrupt for module\n", ssc->name);
-+		retval = -ENXIO;
-+		goto out_unmap;
-+	}
-+
-+	platform_set_drvdata(pdev, ssc);
-+
-+	printk(KERN_INFO "%s: Atmel SSC module at 0x%08lx (irq %d)\n",
-+			ssc->name, (unsigned long)ssc->regs, ssc->irq);
-+
-+	goto out;
-+
-+out_unmap:
-+	iounmap(ssc->regs);
-+out:
-+	return retval;
-+}
-+
-+static int __devexit ssc_remove(struct platform_device *pdev)
-+{
-+	struct ssc_device *ssc = platform_get_drvdata(pdev);
-+
-+	if (ssc && ssc->regs)
-+		iounmap(ssc->regs);
-+	if (ssc && ssc->clk)
-+		clk_put(ssc->clk);
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver ssc_driver = {
-+	.remove		= __devexit_p(ssc_remove),
-+	.driver		= {
-+		.name		= "ssc",
-+	},
-+};
-+
-+static int __init ssc_init(void)
-+{
-+	return platform_driver_probe(&ssc_driver, ssc_probe);
-+}
-+
-+static void __exit ssc_exit(void)
-+{
-+	platform_driver_unregister(&ssc_driver);
-+}
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("SSC driver for AVR32 capable of I2S and SPI master (todo)");
-+MODULE_LICENSE("GPL");
-+
-+module_init(ssc_init);
-+module_exit(ssc_exit);
-diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
-index 12af9c7..6514159 100644
---- a/drivers/mmc/Kconfig
-+++ b/drivers/mmc/Kconfig
-@@ -71,6 +71,16 @@ config MMC_OMAP
- 
- 	  If unsure, say N.
- 
-+config MMC_ATMELMCI
-+	tristate "Atmel Multimedia Card Interface support"
-+	depends on AVR32 && MMC
-+	help
-+	  This selects the Atmel Multimedia Card Interface. If you have
-+	  a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
-+	  slot, say Y or M here.
-+
-+	  If unsure, say N.
-+
- config MMC_WBSD
- 	tristate "Winbond W83L51xD SD/MMC Card Interface support"
- 	depends on MMC && ISA_DMA_API
-diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
-index 83ffb93..caf30e0 100644
---- a/drivers/mmc/Makefile
-+++ b/drivers/mmc/Makefile
-@@ -23,6 +23,7 @@ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
- obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
- obj-$(CONFIG_MMC_OMAP)		+= omap.o
- obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
- 
- mmc_core-y := mmc.o mmc_sysfs.o
-diff --git a/drivers/mmc/atmel-mci.c b/drivers/mmc/atmel-mci.c
-new file mode 100644
-index 0000000..ebeab32
---- /dev/null
-+++ b/drivers/mmc/atmel-mci.c
-@@ -0,0 +1,1218 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/blkdev.h>
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/mmc/host.h>
-+#include <linux/mmc/protocol.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "atmel-mci.h"
-+
-+#define DRIVER_NAME "atmel_mci"
-+
-+#define MCI_CMD_ERROR_FLAGS	(MCI_BIT(RINDE)	| MCI_BIT(RDIRE) |	\
-+				 MCI_BIT(RCRCE) | MCI_BIT(RENDE) |	\
-+				 MCI_BIT(RTOE))
-+#define MCI_DATA_ERROR_FLAGS	(MCI_BIT(DCRCE) | MCI_BIT(DTOE) |	\
-+				 MCI_BIT(OVRE) | MCI_BIT(UNRE))
-+
-+enum {
-+	EVENT_CMD_COMPLETE = 0,
-+	EVENT_CMD_ERROR,
-+	EVENT_DATA_COMPLETE,
-+	EVENT_DATA_ERROR,
-+	EVENT_STOP_SENT,
-+	EVENT_STOP_COMPLETE,
-+	EVENT_STOP_ERROR,
-+	EVENT_DMA_ERROR,
-+	EVENT_CARD_DETECT,
-+};
-+
-+struct atmel_mci_dma {
-+	struct dma_request_sg	req;
-+	unsigned short		rx_periph_id;
-+	unsigned short		tx_periph_id;
-+};
-+
-+struct atmel_mci {
-+	struct mmc_host		*mmc;
-+	void __iomem		*regs;
-+	struct atmel_mci_dma	dma;
-+
-+	struct mmc_request	*mrq;
-+	struct mmc_command	*cmd;
-+	struct mmc_data		*data;
-+
-+	u32			stop_cmdr;
-+	u32			stop_iflags;
-+
-+	struct tasklet_struct	tasklet;
-+	unsigned long		pending_events;
-+	unsigned long		completed_events;
-+	u32			error_status;
-+
-+	int			present;
-+	int			detect_pin;
-+	int			wp_pin;
-+
-+	unsigned long		bus_hz;
-+	unsigned long		mapbase;
-+	struct clk		*mck;
-+	struct platform_device	*pdev;
-+
-+#ifdef CONFIG_DEBUG_FS
-+	struct dentry		*debugfs_root;
-+	struct dentry		*debugfs_regs;
-+	struct dentry		*debugfs_req;
-+	struct dentry		*debugfs_pending_events;
-+	struct dentry		*debugfs_completed_events;
-+#endif
-+};
-+
-+/* Those printks take an awful lot of time... */
-+#ifndef DEBUG
-+static unsigned int fmax = 15000000U;
-+#else
-+static unsigned int fmax = 1000000U;
-+#endif
-+module_param(fmax, uint, 0444);
-+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
-+
-+/* Test bit macros for completed events */
-+#define mci_cmd_is_complete(host)			\
-+	test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_cmd_error_is_complete(host)			\
-+	test_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_data_is_complete(host)			\
-+	test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_data_error_is_complete(host)		\
-+	test_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_stop_sent_is_complete(host)			\
-+	test_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_stop_is_complete(host)			\
-+	test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_stop_error_is_complete(host)		\
-+	test_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_dma_error_is_complete(host)			\
-+	test_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_card_detect_is_complete(host)			\
-+	test_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Test and clear bit macros for pending events */
-+#define mci_clear_cmd_is_pending(host)			\
-+	test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_cmd_error_is_pending(host)		\
-+	test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_clear_data_is_pending(host)			\
-+	test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_is_pending(host)		\
-+	test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_is_pending(host)		\
-+	test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_is_pending(host)			\
-+	test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_stop_error_is_pending(host)		\
-+	test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_clear_dma_error_is_pending(host)		\
-+	test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_is_pending(host)		\
-+	test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Test and set bit macros for completed events */
-+#define mci_set_cmd_is_completed(host)			\
-+	test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_cmd_error_is_completed(host)		\
-+	test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_set_data_is_completed(host)			\
-+	test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_is_completed(host)		\
-+	test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_is_completed(host)		\
-+	test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_is_completed(host)			\
-+	test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_stop_error_is_completed(host)		\
-+	test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_set_dma_error_is_completed(host)		\
-+	test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_is_completed(host)		\
-+	test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for completed events */
-+#define mci_set_cmd_complete(host)			\
-+	set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_cmd_error_complete(host)		\
-+	set_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_set_data_complete(host)			\
-+	set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_complete(host)		\
-+	set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_complete(host)		\
-+	set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_complete(host)			\
-+	set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_stop_error_complete(host)		\
-+	set_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_set_dma_error_complete(host)		\
-+	set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_complete(host)		\
-+	set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for pending events */
-+#define mci_set_cmd_pending(host)			\
-+	set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_set_cmd_error_pending(host)			\
-+	set_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_set_data_pending(host)			\
-+	set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_set_data_error_pending(host)		\
-+	set_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_set_stop_sent_pending(host)			\
-+	set_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_set_stop_pending(host)			\
-+	set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_set_stop_error_pending(host)		\
-+	set_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_set_dma_error_pending(host)			\
-+	set_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_set_card_detect_pending(host)		\
-+	set_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Clear bit macros for pending events */
-+#define mci_clear_cmd_pending(host)			\
-+	clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_cmd_error_pending(host)		\
-+	clear_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_clear_data_pending(host)			\
-+	clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_pending(host)		\
-+	clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_pending(host)		\
-+	clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_pending(host)			\
-+	clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_stop_error_pending(host)		\
-+	clear_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_clear_dma_error_pending(host)		\
-+	clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_pending(host)		\
-+	clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+
-+#define DBG_REQ_BUF_SIZE	(4096 - sizeof(unsigned int))
-+
-+struct req_dbg_data {
-+	unsigned int nbytes;
-+	char str[DBG_REQ_BUF_SIZE];
-+};
-+
-+static int req_dbg_open(struct inode *inode, struct file *file)
-+{
-+	struct atmel_mci *host;
-+	struct mmc_request *mrq;
-+	struct mmc_command *cmd, *stop;
-+	struct mmc_data *data;
-+	struct req_dbg_data *priv;
-+	char *str;
-+	unsigned long n = 0;
-+
-+	priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+	str = priv->str;
-+
-+	mutex_lock(&inode->i_mutex);
-+	host = inode->i_private;
-+
-+	spin_lock_irq(&host->mmc->lock);
-+	mrq = host->mrq;
-+	if (mrq) {
-+		cmd = mrq->cmd;
-+		data = mrq->data;
-+		stop = mrq->stop;
-+		n = snprintf(str, DBG_REQ_BUF_SIZE,
-+			     "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+			     cmd->opcode, cmd->arg, cmd->flags,
-+			     cmd->resp[0], cmd->resp[1], cmd->resp[2],
-+			     cmd->resp[3], cmd->error);
-+		if (n < DBG_REQ_BUF_SIZE && data)
-+			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+				      "DATA %u * %u (%u) %x (err %u)\n",
-+				      data->blocks, data->blksz,
-+				      data->bytes_xfered, data->flags,
-+				      data->error);
-+		if (n < DBG_REQ_BUF_SIZE && stop)
-+			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+				      "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+				      stop->opcode, stop->arg, stop->flags,
-+				      stop->resp[0], stop->resp[1],
-+				      stop->resp[2], stop->resp[3],
-+				      stop->error);
-+	}
-+	spin_unlock_irq(&host->mmc->lock);
-+	mutex_unlock(&inode->i_mutex);
-+
-+	priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
-+	file->private_data = priv;
-+
-+	return 0;
-+}
-+
-+static ssize_t req_dbg_read(struct file *file, char __user *buf,
-+			    size_t nbytes, loff_t *ppos)
-+{
-+	struct req_dbg_data *priv = file->private_data;
-+
-+	return simple_read_from_buffer(buf, nbytes, ppos,
-+				       priv->str, priv->nbytes);
-+}
-+
-+static int req_dbg_release(struct inode *inode, struct file *file)
-+{
-+	kfree(file->private_data);
-+	return 0;
-+}
-+
-+static const struct file_operations req_dbg_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= req_dbg_open,
-+	.llseek		= no_llseek,
-+	.read		= req_dbg_read,
-+	.release	= req_dbg_release,
-+};
-+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+	struct atmel_mci *host;
-+	unsigned int i;
-+	u32 *data;
-+	int ret = -ENOMEM;
-+
-+	mutex_lock(&inode->i_mutex);
-+	host = inode->i_private;
-+	data = kmalloc(inode->i_size, GFP_KERNEL);
-+	if (!data)
-+		goto out;
-+
-+	spin_lock_irq(&host->mmc->lock);
-+	for (i = 0; i < inode->i_size / 4; i++)
-+		data[i] = __raw_readl(host->regs + i * 4);
-+	spin_unlock_irq(&host->mmc->lock);
-+
-+	file->private_data = data;
-+	ret = 0;
-+
-+out:
-+	mutex_unlock(&inode->i_mutex);
-+
-+	return ret;
-+}
-+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+			     size_t nbytes, loff_t *ppos)
-+{
-+	struct inode *inode = file->f_dentry->d_inode;
-+	int ret;
-+
-+	mutex_lock(&inode->i_mutex);
-+	ret = simple_read_from_buffer(buf, nbytes, ppos,
-+				      file->private_data,
-+				      file->f_dentry->d_inode->i_size);
-+	mutex_unlock(&inode->i_mutex);
-+
-+	return ret;
-+}
-+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+	kfree(file->private_data);
-+	return 0;
-+}
-+
-+static const struct file_operations regs_dbg_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= regs_dbg_open,
-+	.llseek		= generic_file_llseek,
-+	.read		= regs_dbg_read,
-+	.release	= regs_dbg_release,
-+};
-+
-+static void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+	struct mmc_host *mmc;
-+	struct dentry *root, *regs;
-+	struct resource *res;
-+
-+	mmc = host->mmc;
-+	root = debugfs_create_dir(mmc_hostname(mmc), NULL);
-+	if (IS_ERR(root) || !root)
-+		goto err_root;
-+	host->debugfs_root = root;
-+
-+	regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
-+	if (!regs)
-+		goto err_regs;
-+
-+	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-+	regs->d_inode->i_size = res->end - res->start + 1;
-+	host->debugfs_regs = regs;
-+
-+	host->debugfs_req = debugfs_create_file("req", 0400, root,
-+						host, &req_dbg_fops);
-+	if (!host->debugfs_req)
-+		goto err_req;
-+
-+	host->debugfs_pending_events
-+		= debugfs_create_u32("pending_events", 0400, root,
-+				     (u32 *)&host->pending_events);
-+	if (!host->debugfs_pending_events)
-+		goto err_pending_events;
-+
-+	host->debugfs_completed_events
-+		= debugfs_create_u32("completed_events", 0400, root,
-+				     (u32 *)&host->completed_events);
-+	if (!host->debugfs_completed_events)
-+		goto err_completed_events;
-+
-+	return;
-+
-+err_completed_events:
-+	debugfs_remove(host->debugfs_pending_events);
-+err_pending_events:
-+	debugfs_remove(host->debugfs_req);
-+err_req:
-+	debugfs_remove(host->debugfs_regs);
-+err_regs:
-+	debugfs_remove(host->debugfs_root);
-+err_root:
-+	host->debugfs_root = NULL;
-+	dev_err(&host->pdev->dev,
-+		"failed to initialize debugfs for %s\n",
-+		mmc_hostname(mmc));
-+}
-+
-+static void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+	if (host->debugfs_root) {
-+		debugfs_remove(host->debugfs_completed_events);
-+		debugfs_remove(host->debugfs_pending_events);
-+		debugfs_remove(host->debugfs_req);
-+		debugfs_remove(host->debugfs_regs);
-+		debugfs_remove(host->debugfs_root);
-+		host->debugfs_root = NULL;
-+	}
-+}
-+#else
-+static inline void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+
-+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+#endif /* CONFIG_DEBUG_FS */
-+
-+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
-+					unsigned int ns)
-+{
-+	return (ns * (host->bus_hz / 1000000) + 999) / 1000;
-+}
-+
-+static void atmci_set_timeout(struct atmel_mci *host,
-+			      struct mmc_data *data)
-+{
-+	static unsigned dtomul_to_shift[] = {
-+		0, 4, 7, 8, 10, 12, 16, 20
-+	};
-+	unsigned timeout;
-+	unsigned dtocyc, dtomul;
-+
-+	timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
-+
-+	for (dtomul = 0; dtomul < 8; dtomul++) {
-+		unsigned shift = dtomul_to_shift[dtomul];
-+		dtocyc = (timeout + (1 << shift) - 1) >> shift;
-+		if (dtocyc < 15)
-+			break;
-+	}
-+
-+	if (dtomul >= 8) {
-+		dtomul = 7;
-+		dtocyc = 15;
-+	}
-+
-+	pr_debug("%s: setting timeout to %u cycles\n",
-+		 mmc_hostname(host->mmc),
-+		 dtocyc << dtomul_to_shift[dtomul]);
-+	mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
-+				| MCI_BF(DTOCYC, dtocyc)));
-+}
-+
-+/*
-+ * Return mask with interrupt flags to be handled for this command.
-+ */
-+static u32 atmci_prepare_command(struct mmc_host *mmc,
-+				 struct mmc_command *cmd,
-+				 u32 *cmd_flags)
-+{
-+	u32 cmdr;
-+	u32 iflags;
-+
-+	cmd->error = MMC_ERR_NONE;
-+
-+	cmdr = 0;
-+	BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0);
-+	cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr);
-+
-+	if (cmd->flags & MMC_RSP_PRESENT) {
-+		if (cmd->flags & MMC_RSP_136)
-+			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
-+		else
-+			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
-+	}
-+
-+	/*
-+	 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
-+	 * it's too difficult to determine whether this is an ACMD or
-+	 * not. Better make it 64.
-+	 */
-+	cmdr |= MCI_BIT(MAXLAT);
-+
-+	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
-+		cmdr |= MCI_BIT(OPDCMD);
-+
-+	iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS;
-+	if (!(cmd->flags & MMC_RSP_CRC))
-+		iflags &= ~MCI_BIT(RCRCE);
-+
-+	pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
-+		 mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
-+		 (unsigned long)cmdr);
-+
-+	*cmd_flags = cmdr;
-+	return iflags;
-+}
-+
-+static void atmci_start_command(struct atmel_mci *host,
-+				struct mmc_command *cmd,
-+				u32 cmd_flags)
-+{
-+	WARN_ON(host->cmd);
-+	host->cmd = cmd;
-+
-+	mci_writel(host, ARGR, cmd->arg);
-+	mci_writel(host, CMDR, cmd_flags);
-+
-+	if (cmd->data)
-+		dma_start_request(host->dma.req.req.dmac,
-+				  host->dma.req.req.channel);
-+}
-+
-+/*
-+ * Returns a mask of flags to be set in the command register when the
-+ * command to start the transfer is to be sent.
-+ */
-+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	u32 cmd_flags;
-+
-+	WARN_ON(host->data);
-+	host->data = data;
-+
-+	atmci_set_timeout(host, data);
-+	mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
-+				| MCI_BF(BLKLEN, data->blksz)));
-+	host->dma.req.block_size = data->blksz;
-+	host->dma.req.nr_blocks = data->blocks;
-+
-+	cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
-+	if (data->flags & MMC_DATA_STREAM)
-+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+	else if (data->blocks > 1)
-+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+	else
-+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
-+
-+	if (data->flags & MMC_DATA_READ) {
-+		cmd_flags |= MCI_BIT(TRDIR);
-+		host->dma.req.nr_sg
-+			= dma_map_sg(&host->pdev->dev, data->sg,
-+				     data->sg_len, DMA_FROM_DEVICE);
-+		host->dma.req.periph_id = host->dma.rx_periph_id;
-+		host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
-+		host->dma.req.data_reg = host->mapbase + MCI_RDR;
-+	} else {
-+		host->dma.req.nr_sg
-+			= dma_map_sg(&host->pdev->dev, data->sg,
-+				     data->sg_len, DMA_TO_DEVICE);
-+		host->dma.req.periph_id = host->dma.tx_periph_id;
-+		host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
-+		host->dma.req.data_reg = host->mapbase + MCI_TDR;
-+	}
-+	host->dma.req.sg = data->sg;
-+
-+	dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
-+
-+	return cmd_flags;
-+}
-+
-+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	struct mmc_data *data = mrq->data;
-+	u32 iflags;
-+	u32 cmdflags = 0;
-+
-+	iflags = mci_readl(host, IMR);
-+	if (iflags)
-+		printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
-+
-+	WARN_ON(host->mrq != NULL);
-+	host->mrq = mrq;
-+	host->pending_events = 0;
-+	host->completed_events = 0;
-+
-+	iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags);
-+
-+	if (mrq->stop) {
-+		BUG_ON(!data);
-+
-+		host->stop_iflags = atmci_prepare_command(mmc, mrq->stop,
-+							  &host->stop_cmdr);
-+		host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
-+		if (!(data->flags & MMC_DATA_WRITE))
-+			host->stop_cmdr |= MCI_BIT(TRDIR);
-+		if (data->flags & MMC_DATA_STREAM)
-+			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+		else
-+			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+	}
-+	if (data) {
-+		cmdflags |= atmci_prepare_data(mmc, data);
-+		iflags |= MCI_DATA_ERROR_FLAGS;
-+	}
-+
-+	atmci_start_command(host, mrq->cmd, cmdflags);
-+	mci_writel(host, IER, iflags);
-+}
-+
-+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	if (ios->clock) {
-+		u32 clkdiv;
-+
-+		clkdiv = host->bus_hz / (2 * ios->clock) - 1;
-+		if (clkdiv > 255)
-+			clkdiv = 255;
-+		mci_writel(host, MR, (clkdiv
-+				      | MCI_BIT(WRPROOF)
-+				      | MCI_BIT(RDPROOF)));
-+	}
-+
-+	switch (ios->bus_width) {
-+	case MMC_BUS_WIDTH_1:
-+		mci_writel(host, SDCR, 0);
-+		break;
-+	case MMC_BUS_WIDTH_4:
-+		mci_writel(host, SDCR, MCI_BIT(SDCBUS));
-+		break;
-+	}
-+
-+	switch (ios->power_mode) {
-+	case MMC_POWER_OFF:
-+		mci_writel(host, CR, MCI_BIT(MCIDIS));
-+		break;
-+	case MMC_POWER_UP:
-+		mci_writel(host, CR, MCI_BIT(SWRST));
-+		break;
-+	case MMC_POWER_ON:
-+		mci_writel(host, CR, MCI_BIT(MCIEN));
-+		break;
-+	}
-+}
-+
-+static int atmci_get_ro(struct mmc_host *mmc)
-+{
-+	int read_only = 0;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	if (host->wp_pin >= 0) {
-+		read_only = gpio_get_value(host->wp_pin);
-+		pr_debug("%s: card is %s\n", mmc_hostname(mmc),
-+			 read_only ? "read-only" : "read-write");
-+	} else {
-+		pr_debug("%s: no pin for checking read-only switch."
-+			 " Assuming write-enable.\n", mmc_hostname(mmc));
-+	}
-+
-+	return read_only;
-+}
-+
-+static struct mmc_host_ops atmci_ops = {
-+	.request	= atmci_request,
-+	.set_ios	= atmci_set_ios,
-+	.get_ro		= atmci_get_ro,
-+};
-+
-+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	WARN_ON(host->cmd || host->data);
-+	host->mrq = NULL;
-+
-+	mmc_request_done(mmc, mrq);
-+}
-+
-+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
-+			  u32 flags)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	atmci_start_command(host, data->stop, host->stop_cmdr | flags);
-+	mci_writel(host, IER, host->stop_iflags);
-+}
-+
-+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
-+{
-+	host->data = NULL;
-+	dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
-+		     ((data->flags & MMC_DATA_WRITE)
-+		      ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
-+
-+	/*
-+	 * Data might complete before command for very short transfers
-+	 * (like READ_SCR)
-+	 */
-+	if (mci_cmd_is_complete(host)
-+	    && (!data->stop || mci_stop_is_complete(host)))
-+		atmci_request_end(host->mmc, data->mrq);
-+}
-+
-+static void atmci_command_error(struct mmc_host *mmc,
-+				struct mmc_command *cmd,
-+				u32 status)
-+{
-+	pr_debug("%s: command error: status=0x%08x\n",
-+		 mmc_hostname(mmc), status);
-+
-+	if (status & MCI_BIT(RTOE))
-+		cmd->error = MMC_ERR_TIMEOUT;
-+	else if (status & MCI_BIT(RCRCE))
-+		cmd->error = MMC_ERR_BADCRC;
-+	else
-+		cmd->error = MMC_ERR_FAILED;
-+}
-+
-+static void atmci_tasklet_func(unsigned long priv)
-+{
-+	struct mmc_host *mmc = (struct mmc_host *)priv;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	struct mmc_request *mrq = host->mrq;
-+	struct mmc_data *data = host->data;
-+
-+	pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
-+		 host->pending_events, host->completed_events,
-+		 mci_readl(host, IMR));
-+
-+	if (mci_clear_cmd_error_is_pending(host)) {
-+		struct mmc_command *cmd;
-+
-+		mci_set_cmd_error_complete(host);
-+		mci_clear_cmd_pending(host);
-+		cmd = host->mrq->cmd;
-+
-+		if (cmd->data) {
-+			dma_stop_request(host->dma.req.req.dmac,
-+					 host->dma.req.req.channel);
-+			host->data = NULL;
-+		}
-+
-+		atmci_command_error(mmc, cmd, host->error_status);
-+		atmci_request_end(mmc, cmd->mrq);
-+	}
-+	if (mci_clear_stop_error_is_pending(host)) {
-+		mci_set_stop_error_complete(host);
-+		mci_clear_stop_pending(host);
-+		atmci_command_error(mmc, host->mrq->stop,
-+				    host->error_status);
-+		if (!host->data)
-+			atmci_request_end(mmc, host->mrq);
-+	}
-+	if (mci_clear_cmd_is_pending(host)) {
-+		mci_set_cmd_complete(host);
-+		if (!mrq->data || mci_data_is_complete(host)
-+		    || mci_data_error_is_complete(host))
-+			atmci_request_end(mmc, mrq);
-+	}
-+	if (mci_clear_stop_is_pending(host)) {
-+		mci_set_stop_complete(host);
-+		if (mci_data_is_complete(host)
-+		    || mci_data_error_is_complete(host))
-+			atmci_request_end(mmc, mrq);
-+	}
-+	if (mci_clear_dma_error_is_pending(host)) {
-+		mci_set_dma_error_complete(host);
-+		mci_clear_data_pending(host);
-+
-+		/* DMA controller got bus error => invalid address */
-+		data->error = MMC_ERR_INVALID;
-+
-+		printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
-+		       mmc_hostname(mmc), host->data->bytes_xfered);
-+
-+		if (data->stop
-+		    && !mci_set_stop_sent_is_completed(host))
-+			/* TODO: Check if card is still present */
-+			send_stop_cmd(host->mmc, data, 0);
-+
-+		atmci_data_complete(host, data);
-+	}
-+	if (mci_clear_data_error_is_pending(host)) {
-+		u32 status = host->error_status;
-+
-+		mci_set_data_error_complete(host);
-+		mci_clear_data_pending(host);
-+
-+		dma_stop_request(host->dma.req.req.dmac,
-+				 host->dma.req.req.channel);
-+
-+		printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
-+		       mmc_hostname(host->mmc), status);
-+
-+		if (status & MCI_BIT(DCRCE)) {
-+			printk(KERN_DEBUG "%s: Data CRC error\n",
-+			       mmc_hostname(host->mmc));
-+			data->error = MMC_ERR_BADCRC;
-+		} else if (status & MCI_BIT(DTOE)) {
-+			printk(KERN_DEBUG "%s: Data Timeout error\n",
-+			       mmc_hostname(host->mmc));
-+			data->error = MMC_ERR_TIMEOUT;
-+		} else {
-+			printk(KERN_DEBUG "%s: Data FIFO error\n",
-+			       mmc_hostname(host->mmc));
-+			data->error = MMC_ERR_FIFO;
-+		}
-+		printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
-+		       mmc_hostname(host->mmc), data->bytes_xfered);
-+
-+		if (data->stop
-+		    && !mci_set_stop_sent_is_completed(host))
-+			/* TODO: Check if card is still present */
-+			send_stop_cmd(host->mmc, data, 0);
-+
-+		atmci_data_complete(host, data);
-+	}
-+	if (mci_clear_data_is_pending(host)) {
-+		mci_set_data_complete(host);
-+		data->bytes_xfered = data->blocks * data->blksz;
-+		atmci_data_complete(host, data);
-+	}
-+	if (mci_clear_card_detect_is_pending(host)) {
-+		/* Reset controller if card is gone */
-+		if (!host->present) {
-+			mci_writel(host, CR, MCI_BIT(SWRST));
-+			mci_writel(host, IDR, ~0UL);
-+			mci_writel(host, CR, MCI_BIT(MCIEN));
-+		}
-+
-+		/* Clean up queue if present */
-+		if (mrq) {
-+			if (!mci_cmd_is_complete(host)
-+			    && !mci_cmd_error_is_complete(host)) {
-+				mrq->cmd->error = MMC_ERR_TIMEOUT;
-+			}
-+			if (mrq->data && !mci_data_is_complete(host)
-+			    && !mci_data_error_is_complete(host)) {
-+				dma_stop_request(host->dma.req.req.dmac,
-+						host->dma.req.req.channel);
-+				host->data->error = MMC_ERR_TIMEOUT;
-+				atmci_data_complete(host, data);
-+			}
-+			if (mrq->stop && !mci_stop_is_complete(host)
-+			    && !mci_stop_error_is_complete(host)) {
-+				mrq->stop->error = MMC_ERR_TIMEOUT;
-+			}
-+
-+			host->cmd = NULL;
-+			atmci_request_end(mmc, mrq);
-+		}
-+		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-+	}
-+}
-+
-+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	struct mmc_command *cmd = host->cmd;
-+
-+	/*
-+	 * Read the response now so that we're free to send a new
-+	 * command immediately.
-+	 */
-+	cmd->resp[0] = mci_readl(host, RSPR);
-+	cmd->resp[1] = mci_readl(host, RSPR);
-+	cmd->resp[2] = mci_readl(host, RSPR);
-+	cmd->resp[3] = mci_readl(host, RSPR);
-+
-+	mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS);
-+	host->cmd = NULL;
-+
-+	if (mci_stop_sent_is_complete(host))
-+		mci_set_stop_pending(host);
-+	else
-+		mci_set_cmd_pending(host);
-+
-+	tasklet_schedule(&host->tasklet);
-+}
-+
-+static void atmci_xfer_complete(struct dma_request *_req)
-+{
-+	struct dma_request_sg *req = to_dma_request_sg(_req);
-+	struct atmel_mci_dma *dma;
-+	struct atmel_mci *host;
-+	struct mmc_data *data;
-+
-+	dma = container_of(req, struct atmel_mci_dma, req);
-+	host = container_of(dma, struct atmel_mci, dma);
-+	data = host->data;
-+
-+	if (data->stop && !mci_set_stop_sent_is_completed(host))
-+		send_stop_cmd(host->mmc, data, 0);
-+
-+	if (data->flags & MMC_DATA_READ) {
-+		mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS);
-+		mci_set_data_pending(host);
-+		tasklet_schedule(&host->tasklet);
-+	} else {
-+		/*
-+		 * For the WRITE case, wait for NOTBUSY. This function
-+		 * is called when everything has been written to the
-+		 * controller, not when the card is done programming.
-+		 */
-+		mci_writel(host, IER, MCI_BIT(NOTBUSY));
-+	}
-+}
-+
-+static void atmci_dma_error(struct dma_request *_req)
-+{
-+	struct dma_request_sg *req = to_dma_request_sg(_req);
-+	struct atmel_mci_dma *dma;
-+	struct atmel_mci *host;
-+
-+	dma = container_of(req, struct atmel_mci_dma, req);
-+	host = container_of(dma, struct atmel_mci, dma);
-+
-+	mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+			       | MCI_DATA_ERROR_FLAGS));
-+
-+	mci_set_dma_error_pending(host);
-+	tasklet_schedule(&host->tasklet);
-+}
-+
-+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
-+{
-+	struct mmc_host *mmc = dev_id;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	u32 status, mask, pending;
-+
-+	spin_lock(&mmc->lock);
-+
-+	status = mci_readl(host, SR);
-+	mask = mci_readl(host, IMR);
-+	pending = status & mask;
-+
-+	do {
-+		if (pending & MCI_CMD_ERROR_FLAGS) {
-+			mci_writel(host, IDR, (MCI_BIT(CMDRDY)
-+					       | MCI_BIT(NOTBUSY)
-+					       | MCI_CMD_ERROR_FLAGS
-+					       | MCI_DATA_ERROR_FLAGS));
-+			host->error_status = status;
-+			host->cmd = NULL;
-+			if (mci_stop_sent_is_complete(host))
-+				mci_set_stop_error_pending(host);
-+			else
-+				mci_set_cmd_error_pending(host);
-+			tasklet_schedule(&host->tasklet);
-+			break;
-+		}
-+		if (pending & MCI_DATA_ERROR_FLAGS) {
-+			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+					       | MCI_DATA_ERROR_FLAGS));
-+			host->error_status = status;
-+			mci_set_data_error_pending(host);
-+			tasklet_schedule(&host->tasklet);
-+			break;
-+		}
-+		if (pending & MCI_BIT(CMDRDY))
-+			atmci_cmd_interrupt(mmc, status);
-+		if (pending & MCI_BIT(NOTBUSY)) {
-+			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+					       | MCI_DATA_ERROR_FLAGS));
-+			mci_set_data_pending(host);
-+			tasklet_schedule(&host->tasklet);
-+		}
-+
-+		status = mci_readl(host, SR);
-+		mask = mci_readl(host, IMR);
-+		pending = status & mask;
-+	} while (pending);
-+
-+	spin_unlock(&mmc->lock);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t atmci_detect_change(int irq, void *dev_id)
-+{
-+	struct mmc_host *mmc = dev_id;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	int present = !gpio_get_value(irq_to_gpio(irq));
-+
-+	if (present != host->present) {
-+		pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
-+			 present ? "inserted" : "removed");
-+		host->present = present;
-+		mci_set_card_detect_pending(host);
-+		tasklet_schedule(&host->tasklet);
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+static int __devinit atmci_probe(struct platform_device *pdev)
-+{
-+	struct mci_platform_data *board;
-+	struct atmel_mci *host;
-+	struct mmc_host *mmc;
-+	struct resource *regs;
-+	int irq;
-+	int ret;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return irq;
-+
-+	board = pdev->dev.platform_data;
-+
-+	mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
-+	if (!mmc)
-+		return -ENOMEM;
-+
-+	host = mmc_priv(mmc);
-+	host->pdev = pdev;
-+	host->mmc = mmc;
-+	if (board) {
-+		host->detect_pin = board->detect_pin;
-+		host->wp_pin = board->wp_pin;
-+	} else {
-+		host->detect_pin = -1;
-+		host->detect_pin = -1;
-+	}
-+
-+	host->mck = clk_get(&pdev->dev, "mci_clk");
-+	if (IS_ERR(host->mck)) {
-+		ret = PTR_ERR(host->mck);
-+		goto out_free_host;
-+	}
-+	clk_enable(host->mck);
-+
-+	ret = -ENOMEM;
-+	host->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!host->regs)
-+		goto out_disable_clk;
-+
-+	host->bus_hz = clk_get_rate(host->mck);
-+	host->mapbase = regs->start;
-+
-+	mmc->ops = &atmci_ops;
-+	mmc->f_min = (host->bus_hz + 511) / 512;
-+	mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
-+	mmc->ocr_avail	= 0x00100000;
-+	mmc->caps |= MMC_CAP_4_BIT_DATA;
-+
-+	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
-+
-+	ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
-+	if (ret)
-+		goto out_unmap;
-+
-+	/* Assume card is present if we don't have a detect pin */
-+	host->present = 1;
-+	if (host->detect_pin >= 0) {
-+		if (gpio_request(host->detect_pin, "mmc_detect")) {
-+			printk(KERN_WARNING "%s: no detect pin available\n",
-+			       mmc_hostname(host->mmc));
-+			host->detect_pin = -1;
-+		} else {
-+			host->present = !gpio_get_value(host->detect_pin);
-+		}
-+	}
-+	if (host->wp_pin >= 0) {
-+		if (gpio_request(host->wp_pin, "mmc_wp")) {
-+			printk(KERN_WARNING "%s: no WP pin available\n",
-+			       mmc_hostname(host->mmc));
-+			host->wp_pin = -1;
-+		}
-+	}
-+
-+	/* TODO: Get this information from platform data */
-+	ret = -ENOMEM;
-+	host->dma.req.req.dmac = find_dma_controller(0);
-+	if (!host->dma.req.req.dmac) {
-+		printk(KERN_ERR
-+		       "mmci: No DMA controller available, aborting\n");
-+		goto out_free_irq;
-+	}
-+	ret = dma_alloc_channel(host->dma.req.req.dmac);
-+	if (ret < 0) {
-+		printk(KERN_ERR
-+		       "mmci: Unable to allocate DMA channel, aborting\n");
-+		goto out_free_irq;
-+	}
-+	host->dma.req.req.channel = ret;
-+	host->dma.req.width = DMA_WIDTH_32BIT;
-+	host->dma.req.req.xfer_complete = atmci_xfer_complete;
-+	host->dma.req.req.block_complete = NULL; // atmci_block_complete;
-+	host->dma.req.req.error = atmci_dma_error;
-+	host->dma.rx_periph_id = 0;
-+	host->dma.tx_periph_id = 1;
-+
-+	mci_writel(host, CR, MCI_BIT(SWRST));
-+	mci_writel(host, IDR, ~0UL);
-+	mci_writel(host, CR, MCI_BIT(MCIEN));
-+
-+	platform_set_drvdata(pdev, host);
-+
-+	mmc_add_host(mmc);
-+
-+	if (host->detect_pin >= 0) {
-+		ret = request_irq(gpio_to_irq(host->detect_pin),
-+				  atmci_detect_change,
-+				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+				  DRIVER_NAME, mmc);
-+		if (ret) {
-+			printk(KERN_ERR
-+			       "%s: could not request IRQ %d for detect pin\n",
-+			       mmc_hostname(mmc),
-+			       gpio_to_irq(host->detect_pin));
-+			gpio_free(host->detect_pin);
-+			host->detect_pin = -1;
-+		}
-+	}
-+
-+	printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
-+	       mmc_hostname(mmc), host->mapbase, irq);
-+
-+	atmci_init_debugfs(host);
-+
-+	return 0;
-+
-+out_free_irq:
-+	if (host->detect_pin >= 0)
-+		gpio_free(host->detect_pin);
-+	if (host->wp_pin >= 0)
-+		gpio_free(host->wp_pin);
-+	free_irq(irq, mmc);
-+out_unmap:
-+	iounmap(host->regs);
-+out_disable_clk:
-+	clk_disable(host->mck);
-+	clk_put(host->mck);
-+out_free_host:
-+	mmc_free_host(mmc);
-+	return ret;
-+}
-+
-+static int __devexit atmci_remove(struct platform_device *pdev)
-+{
-+	struct atmel_mci *host = platform_get_drvdata(pdev);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	if (host) {
-+		atmci_cleanup_debugfs(host);
-+
-+		if (host->detect_pin >= 0) {
-+			free_irq(gpio_to_irq(host->detect_pin), host->mmc);
-+			cancel_delayed_work(&host->mmc->detect);
-+			gpio_free(host->detect_pin);
-+		}
-+
-+		mmc_remove_host(host->mmc);
-+
-+		mci_writel(host, IDR, ~0UL);
-+		mci_writel(host, CR, MCI_BIT(MCIDIS));
-+		mci_readl(host, SR);
-+
-+		dma_release_channel(host->dma.req.req.dmac,
-+				    host->dma.req.req.channel);
-+
-+		if (host->wp_pin >= 0)
-+			gpio_free(host->wp_pin);
-+
-+		free_irq(platform_get_irq(pdev, 0), host->mmc);
-+		iounmap(host->regs);
-+
-+		clk_disable(host->mck);
-+		clk_put(host->mck);
-+
-+		mmc_free_host(host->mmc);
-+	}
-+	return 0;
-+}
-+
-+static struct platform_driver atmci_driver = {
-+	.probe		= atmci_probe,
-+	.remove		= __devexit_p(atmci_remove),
-+	.driver		= {
-+		.name		= DRIVER_NAME,
-+	},
-+};
-+
-+static int __init atmci_init(void)
-+{
-+	return platform_driver_register(&atmci_driver);
-+}
-+
-+static void __exit atmci_exit(void)
-+{
-+	platform_driver_unregister(&atmci_driver);
-+}
-+
-+module_init(atmci_init);
-+module_exit(atmci_exit);
-+
-+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/mmc/atmel-mci.h b/drivers/mmc/atmel-mci.h
-new file mode 100644
-index 0000000..60d15c4
---- /dev/null
-+++ b/drivers/mmc/atmel-mci.h
-@@ -0,0 +1,192 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
-+#define __DRIVERS_MMC_ATMEL_MCI_H__
-+
-+/* MCI register offsets */
-+#define MCI_CR					0x0000
-+#define MCI_MR					0x0004
-+#define MCI_DTOR				0x0008
-+#define MCI_SDCR				0x000c
-+#define MCI_ARGR				0x0010
-+#define MCI_CMDR				0x0014
-+#define MCI_BLKR				0x0018
-+#define MCI_RSPR				0x0020
-+#define MCI_RSPR1				0x0024
-+#define MCI_RSPR2				0x0028
-+#define MCI_RSPR3				0x002c
-+#define MCI_RDR					0x0030
-+#define MCI_TDR					0x0034
-+#define MCI_SR					0x0040
-+#define MCI_IER					0x0044
-+#define MCI_IDR					0x0048
-+#define MCI_IMR					0x004c
-+
-+/* Bitfields in CR */
-+#define MCI_MCIEN_OFFSET			0
-+#define MCI_MCIEN_SIZE				1
-+#define MCI_MCIDIS_OFFSET			1
-+#define MCI_MCIDIS_SIZE				1
-+#define MCI_PWSEN_OFFSET			2
-+#define MCI_PWSEN_SIZE				1
-+#define MCI_PWSDIS_OFFSET			3
-+#define MCI_PWSDIS_SIZE				1
-+#define MCI_SWRST_OFFSET			7
-+#define MCI_SWRST_SIZE				1
-+
-+/* Bitfields in MR */
-+#define MCI_CLKDIV_OFFSET			0
-+#define MCI_CLKDIV_SIZE				8
-+#define MCI_PWSDIV_OFFSET			8
-+#define MCI_PWSDIV_SIZE				3
-+#define MCI_RDPROOF_OFFSET			11
-+#define MCI_RDPROOF_SIZE			1
-+#define MCI_WRPROOF_OFFSET			12
-+#define MCI_WRPROOF_SIZE			1
-+#define MCI_DMAPADV_OFFSET			14
-+#define MCI_DMAPADV_SIZE			1
-+#define MCI_BLKLEN_OFFSET			16
-+#define MCI_BLKLEN_SIZE				16
-+
-+/* Bitfields in DTOR */
-+#define MCI_DTOCYC_OFFSET			0
-+#define MCI_DTOCYC_SIZE				4
-+#define MCI_DTOMUL_OFFSET			4
-+#define MCI_DTOMUL_SIZE				3
-+
-+/* Bitfields in SDCR */
-+#define MCI_SDCSEL_OFFSET			0
-+#define MCI_SDCSEL_SIZE				4
-+#define MCI_SDCBUS_OFFSET			7
-+#define MCI_SDCBUS_SIZE				1
-+
-+/* Bitfields in ARGR */
-+#define MCI_ARG_OFFSET				0
-+#define MCI_ARG_SIZE				32
-+
-+/* Bitfields in CMDR */
-+#define MCI_CMDNB_OFFSET			0
-+#define MCI_CMDNB_SIZE				6
-+#define MCI_RSPTYP_OFFSET			6
-+#define MCI_RSPTYP_SIZE				2
-+#define MCI_SPCMD_OFFSET			8
-+#define MCI_SPCMD_SIZE				3
-+#define MCI_OPDCMD_OFFSET			11
-+#define MCI_OPDCMD_SIZE				1
-+#define MCI_MAXLAT_OFFSET			12
-+#define MCI_MAXLAT_SIZE				1
-+#define MCI_TRCMD_OFFSET			16
-+#define MCI_TRCMD_SIZE				2
-+#define MCI_TRDIR_OFFSET			18
-+#define MCI_TRDIR_SIZE				1
-+#define MCI_TRTYP_OFFSET			19
-+#define MCI_TRTYP_SIZE				2
-+
-+/* Bitfields in BLKR */
-+#define MCI_BCNT_OFFSET				0
-+#define MCI_BCNT_SIZE				16
-+
-+/* Bitfields in RSPRn */
-+#define MCI_RSP_OFFSET				0
-+#define MCI_RSP_SIZE				32
-+
-+/* Bitfields in SR/IER/IDR/IMR */
-+#define MCI_CMDRDY_OFFSET			0
-+#define MCI_CMDRDY_SIZE				1
-+#define MCI_RXRDY_OFFSET			1
-+#define MCI_RXRDY_SIZE				1
-+#define MCI_TXRDY_OFFSET			2
-+#define MCI_TXRDY_SIZE				1
-+#define MCI_BLKE_OFFSET				3
-+#define MCI_BLKE_SIZE				1
-+#define MCI_DTIP_OFFSET				4
-+#define MCI_DTIP_SIZE				1
-+#define MCI_NOTBUSY_OFFSET			5
-+#define MCI_NOTBUSY_SIZE			1
-+#define MCI_ENDRX_OFFSET			6
-+#define MCI_ENDRX_SIZE				1
-+#define MCI_ENDTX_OFFSET			7
-+#define MCI_ENDTX_SIZE				1
-+#define MCI_RXBUFF_OFFSET			14
-+#define MCI_RXBUFF_SIZE				1
-+#define MCI_TXBUFE_OFFSET			15
-+#define MCI_TXBUFE_SIZE				1
-+#define MCI_RINDE_OFFSET			16
-+#define MCI_RINDE_SIZE				1
-+#define MCI_RDIRE_OFFSET			17
-+#define MCI_RDIRE_SIZE				1
-+#define MCI_RCRCE_OFFSET			18
-+#define MCI_RCRCE_SIZE				1
-+#define MCI_RENDE_OFFSET			19
-+#define MCI_RENDE_SIZE				1
-+#define MCI_RTOE_OFFSET				20
-+#define MCI_RTOE_SIZE				1
-+#define MCI_DCRCE_OFFSET			21
-+#define MCI_DCRCE_SIZE				1
-+#define MCI_DTOE_OFFSET				22
-+#define MCI_DTOE_SIZE				1
-+#define MCI_OVRE_OFFSET				30
-+#define MCI_OVRE_SIZE				1
-+#define MCI_UNRE_OFFSET				31
-+#define MCI_UNRE_SIZE				1
-+
-+/* Constants for DTOMUL */
-+#define MCI_DTOMUL_1_CYCLE			0
-+#define MCI_DTOMUL_16_CYCLES			1
-+#define MCI_DTOMUL_128_CYCLES			2
-+#define MCI_DTOMUL_256_CYCLES			3
-+#define MCI_DTOMUL_1024_CYCLES			4
-+#define MCI_DTOMUL_4096_CYCLES			5
-+#define MCI_DTOMUL_65536_CYCLES			6
-+#define MCI_DTOMUL_1048576_CYCLES		7
-+
-+/* Constants for RSPTYP */
-+#define MCI_RSPTYP_NO_RESP			0
-+#define MCI_RSPTYP_48_BIT			1
-+#define MCI_RSPTYP_136_BIT			2
-+
-+/* Constants for SPCMD */
-+#define MCI_SPCMD_NO_SPEC_CMD			0
-+#define MCI_SPCMD_INIT_CMD			1
-+#define MCI_SPCMD_SYNC_CMD			2
-+#define MCI_SPCMD_INT_CMD			4
-+#define MCI_SPCMD_INT_RESP			5
-+
-+/* Constants for TRCMD */
-+#define MCI_TRCMD_NO_TRANS			0
-+#define MCI_TRCMD_START_TRANS			1
-+#define MCI_TRCMD_STOP_TRANS			2
-+
-+/* Constants for TRTYP */
-+#define MCI_TRTYP_BLOCK				0
-+#define MCI_TRTYP_MULTI_BLOCK			1
-+#define MCI_TRTYP_STREAM			2
-+
-+/* Bit manipulation macros */
-+#define MCI_BIT(name)					\
-+	(1 << MCI_##name##_OFFSET)
-+#define MCI_BF(name,value)				\
-+	(((value) & ((1 << MCI_##name##_SIZE) - 1))	\
-+	 << MCI_##name##_OFFSET)
-+#define MCI_BFEXT(name,value)				\
-+	(((value) >> MCI_##name##_OFFSET)		\
-+	 & ((1 << MCI_##name##_SIZE) - 1))
-+#define MCI_BFINS(name,value,old)			\
-+	(((old) & ~(((1 << MCI_##name##_SIZE) - 1)	\
-+		    << MCI_##name##_OFFSET))		\
-+	 | MCI_BF(name,value))
-+
-+/* Register access macros */
-+#define mci_readl(port,reg)				\
-+	__raw_readl((port)->regs + MCI_##reg)
-+#define mci_writel(port,reg,value)			\
-+	__raw_writel((value), (port)->regs + MCI_##reg)
-+
-+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
-diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
-index f334959..e2ef662 100644
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -47,6 +47,7 @@
- #define I82802AC	0x00ac
- #define MANUFACTURER_ST         0x0020
- #define M50LPW080       0x002F
-+#define AT49BV640D	0x02de
- 
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -153,6 +154,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
- }
- #endif
- 
-+/* Atmel chips don't use the same PRI format as Intel chips */
-+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-+	struct cfi_pri_atmel atmel_pri;
-+	uint32_t features = 0;
-+
-+	/* Reverse byteswapping */
-+	extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
-+	extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
-+	extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
-+
-+	memcpy(&atmel_pri, extp, sizeof(atmel_pri));
-+	memset((char *)extp + 5, 0, sizeof(*extp) - 5);
-+
-+	printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
-+
-+	if (atmel_pri.Features & 0x01) /* chip erase supported */
-+		features |= (1<<0);
-+	if (atmel_pri.Features & 0x02) /* erase suspend supported */
-+		features |= (1<<1);
-+	if (atmel_pri.Features & 0x04) /* program suspend supported */
-+		features |= (1<<2);
-+	if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
-+		features |= (1<<9);
-+	if (atmel_pri.Features & 0x20) /* page mode read supported */
-+		features |= (1<<7);
-+	if (atmel_pri.Features & 0x40) /* queued erase supported */
-+		features |= (1<<4);
-+	if (atmel_pri.Features & 0x80) /* Protection bits supported */
-+		features |= (1<<6);
-+
-+	extp->FeatureSupport = features;
-+
-+	/* burst write mode not supported */
-+	cfi->cfiq->BufWriteTimeoutTyp = 0;
-+	cfi->cfiq->BufWriteTimeoutMax = 0;
-+}
-+
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
- static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -221,6 +263,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
- }
- 
- static struct cfi_fixup cfi_fixup_table[] = {
-+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
- #endif
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 1f64458..205977b 100644
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
- 		extp->TopBottom = 2;
- 	else
- 		extp->TopBottom = 3;
-+
-+	/* burst write mode not supported */
-+	cfi->cfiq->BufWriteTimeoutTyp = 0;
-+	cfi->cfiq->BufWriteTimeoutMax = 0;
- }
- 
- static void fixup_use_secsi(struct mtd_info *mtd, void *param)
-@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
- }
- 
- static struct cfi_fixup cfi_fixup_table[] = {
-+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
- 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
- #endif
-@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
- #if !FORCE_WORD_WRITE
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
--	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- 	{ 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
-index 35f8864..29388e1 100644
---- a/drivers/pcmcia/Kconfig
-+++ b/drivers/pcmcia/Kconfig
-@@ -270,6 +270,13 @@ config AT91_CF
- 	  Say Y here to support the CompactFlash controller on AT91 chips.
- 	  Or choose M to compile the driver as a module named "at91_cf".
- 
-+config AT32_CF
-+	tristate "AT32AP CompactFlash Controller"
-+	depends on PCMCIA && AVR32 && PLATFORM_AT32AP
-+	help
-+	  Say Y here to support the CompactFlash controller on AT32 chips.
-+	  Or choose M to compile the driver as a module named "at32_cf".
-+
- config PCCARD_NONSTATIC
- 	tristate
- 
-diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
-index 4276965..08d7ffa 100644
---- a/drivers/pcmcia/Makefile
-+++ b/drivers/pcmcia/Makefile
-@@ -37,6 +37,7 @@ obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc4171_card.o
- obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
- obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
- obj-$(CONFIG_AT91_CF)				+= at91_cf.o
-+obj-$(CONFIG_AT32_CF)				+= at32_cf.o
- 
- sa11xx_core-y					+= soc_common.o sa11xx_base.o
- pxa2xx_core-y					+= soc_common.o pxa2xx_base.o
-diff --git a/drivers/pcmcia/at32_cf.c b/drivers/pcmcia/at32_cf.c
-new file mode 100644
-index 0000000..7165c39
---- /dev/null
-+++ b/drivers/pcmcia/at32_cf.c
-@@ -0,0 +1,506 @@
-+/*
-+ * Driver for AVR32 Static Memory Controller: CompactFlash support
-+ *
-+ * Copyright (C) 2006 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <pcmcia/ss.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+
-+#include <asm/arch/smc.h>
-+
-+struct at32_cf_socket {
-+	struct pcmcia_socket	socket;
-+	int			detect_pin;
-+	int			reset_pin;
-+	int			vcc_pin;
-+	struct resource		res_attr;
-+	struct resource		res_mem;
-+	struct resource		res_io;
-+	struct smc_config	smc;
-+	unsigned int		irq;
-+	unsigned int		cf_cs;
-+	socket_state_t		state;
-+	unsigned		present:1;
-+};
-+#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
-+
-+/*
-+ * We have the following memory layout relative to the base address:
-+ *
-+ *   Alt IDE Mode:      00e0 0000 -> 00ff ffff
-+ *   True IDE Mode:     00c0 0000 -> 00df ffff
-+ *   I/O memory:        0080 0000 -> 00bf ffff
-+ *   Common memory:     0040 0000 -> 007f ffff
-+ *   Attribute memory:  0000 0000 -> 003f ffff
-+ */
-+#define CF_ATTR_OFFSET	0x00000000
-+#define CF_MEM_OFFSET	0x00400000
-+#define CF_IO_OFFSET	0x00800000
-+#define CF_RES_SIZE	2048
-+
-+#ifdef DEBUG
-+
-+static int pc_debug;
-+module_param(pc_debug, int, 0644);
-+
-+static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
-+			  int level, const char *fmt, ...)
-+{
-+	va_list args;
-+
-+	if (pc_debug > level) {
-+		printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
-+		va_start(args, fmt);
-+		vprintk(fmt, args);
-+		va_end(args);
-+	}
-+}
-+
-+#define debug(cf, lvl, fmt, arg...)			\
-+	at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
-+
-+#else
-+#define debug(cf, lvl, fmt, arg...) do { } while (0)
-+#endif
-+
-+static inline int at32_cf_present(struct at32_cf_socket *cf)
-+{
-+	int present = 1;
-+
-+	/* If we don't have a detect pin, assume the card is present */
-+	if (cf->detect_pin >= 0)
-+		present = !gpio_get_value(cf->detect_pin);
-+
-+	return present;
-+}
-+
-+static irqreturn_t at32_cf_irq(int irq, void *dev_id)
-+{
-+	struct at32_cf_socket *cf = dev_id;
-+	unsigned int present;
-+
-+	present = at32_cf_present(cf);
-+	if (present != cf->present) {
-+		cf->present = present;
-+		debug(cf, 3, "card %s\n", present ? "present" : "gone");
-+		pcmcia_parse_events(&cf->socket, SS_DETECT);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
-+{
-+	struct at32_cf_socket *cf;
-+	u_int status = 0;
-+
-+	cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+	if (at32_cf_present(cf)) {
-+		/* NOTE: gpio on AP7xxx is 3.3V */
-+		status = SS_DETECT | SS_3VCARD | SS_READY;
-+		if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
-+			status |= SS_POWERON;
-+	}
-+
-+	*value = status;
-+	return 0;
-+}
-+
-+static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
-+{
-+	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+	debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
-+			(state->csc_mask==0)?"<NONE> ":"",
-+			(state->csc_mask&SS_DETECT)?"DETECT ":"",
-+			(state->csc_mask&SS_READY)?"READY ":"",
-+			(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
-+			(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
-+			(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
-+			(state->flags==0)?"<NONE> ":"",
-+			(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
-+			(state->flags&SS_IOCARD)?"IOCARD ":"",
-+			(state->flags&SS_RESET)?"RESET ":"",
-+			(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
-+			(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
-+			state->Vcc, state->Vpp, state->io_irq);
-+
-+	/*
-+	 * TODO: Allow boards to override this in case they have level
-+	 * converters.
-+	 */
-+	switch (state->Vcc) {
-+	case 0:
-+		if (cf->vcc_pin >= 0)
-+			gpio_set_value(cf->vcc_pin, 0);
-+		break;
-+	case 33:
-+		if (cf->vcc_pin >= 0)
-+			gpio_set_value(cf->vcc_pin, 1);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	if (cf->reset_pin >= 0)
-+		gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
-+
-+	cf->state = *state;
-+
-+	return 0;
-+}
-+
-+static int at32_cf_socket_init(struct pcmcia_socket *sock)
-+{
-+#ifdef DEBUG
-+	struct at32_cf_socket *cf = to_at32_cf(sock);
-+	debug(cf, 2, "called\n");
-+#endif
-+	return 0;
-+}
-+
-+static int at32_cf_suspend(struct pcmcia_socket *sock)
-+{
-+#ifdef DEBUG
-+	struct at32_cf_socket *cf = to_at32_cf(sock);
-+	debug(cf, 2, "called\n");
-+#endif
-+	at32_cf_set_socket(sock, &dead_socket);
-+
-+	return 0;
-+}
-+
-+static int at32_cf_set_io_map(struct pcmcia_socket *sock,
-+			      struct pccard_io_map *map)
-+{
-+	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
-+	int retval;
-+
-+	debug(cf, 2, "map %u  speed %u start 0x%08x stop 0x%08x\n",
-+		map->map, map->speed, map->start, map->stop);
-+	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
-+		(map->flags == 0) ? "<NONE>":"",
-+		(map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
-+		(map->flags & MAP_16BIT) ? "16BIT " : "",
-+		(map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
-+		(map->flags & MAP_0WS) ? "0WS " : "",
-+		(map->flags & MAP_WRPROT) ? "WRPROT " : "",
-+		(map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
-+		(map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
-+
-+	map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
-+
-+	if (map->flags & MAP_16BIT)
-+		cf->smc.bus_width = 2;
-+	else
-+		cf->smc.bus_width = 1;
-+
-+	if (map->flags & MAP_USE_WAIT)
-+		cf->smc.nwait_mode = 3;
-+	else
-+		cf->smc.nwait_mode = 0;
-+
-+	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
-+	if (retval) {
-+		printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
-+		return retval;
-+	}
-+
-+	map->start = cf->socket.io_offset;
-+	map->stop = map->start + CF_RES_SIZE - 1;
-+
-+	return 0;
-+}
-+
-+static int
-+at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
-+{
-+	struct at32_cf_socket *cf;
-+
-+	cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+	debug(cf, 2, "map %u speed %u card_start %08x\n",
-+		map->map, map->speed, map->card_start);
-+	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
-+		(map->flags==0)?"<NONE>":"",
-+		(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
-+		(map->flags&MAP_16BIT)?"16BIT ":"",
-+		(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
-+		(map->flags&MAP_0WS)?"0WS ":"",
-+		(map->flags&MAP_WRPROT)?"WRPROT ":"",
-+		(map->flags&MAP_ATTRIB)?"ATTRIB ":"",
-+		(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
-+
-+	if (map->card_start)
-+		return -EINVAL;
-+
-+	map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT;
-+
-+	if (map->flags & MAP_ATTRIB)
-+		map->static_start = cf->res_attr.start;
-+	else
-+		map->static_start = cf->res_mem.start;
-+
-+	return 0;
-+}
-+
-+static struct pccard_operations at32_cf_ops = {
-+	.init			= at32_cf_socket_init,
-+	.suspend		= at32_cf_suspend,
-+	.get_status		= at32_cf_get_status,
-+	.set_socket		= at32_cf_set_socket,
-+	.set_io_map		= at32_cf_set_io_map,
-+	.set_mem_map		= at32_cf_set_mem_map,
-+};
-+
-+static int __init request_pin(struct platform_device *pdev,
-+			      unsigned int pin, const char *name)
-+{
-+	if (gpio_request(pin, name)) {
-+		dev_warn(&pdev->dev, "failed to request %s pin\n", name);
-+		return -1;
-+	}
-+
-+	return pin;
-+}
-+
-+static int __init at32_cf_probe(struct platform_device *pdev)
-+{
-+	struct at32_cf_socket	*cf;
-+	struct cf_platform_data	*board = pdev->dev.platform_data;
-+	struct resource		*res_skt;
-+	int			irq;
-+	int			ret;
-+
-+	dev_dbg(&pdev->dev, "probe");
-+
-+	if (!board)
-+		return -ENXIO;
-+
-+	res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res_skt)
-+		return -ENXIO;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return irq;
-+
-+	cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
-+	if (!cf)
-+		return -ENOMEM;
-+
-+	cf->detect_pin = -1;
-+	cf->reset_pin = -1;
-+	cf->vcc_pin = -1;
-+	cf->cf_cs = board->cs;
-+
-+	if (board->detect_pin)
-+		cf->detect_pin = request_pin(pdev, board->detect_pin,
-+					     "cf_detect");
-+	if (board->reset_pin)
-+		cf->reset_pin = request_pin(pdev, board->reset_pin,
-+					    "cf_reset");
-+	if (board->vcc_pin)
-+		cf->vcc_pin = request_pin(pdev, board->reset_pin,
-+					  "cf_vcc");
-+
-+	debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
-+	      cf->detect_pin, cf->reset_pin, cf->vcc_pin);
-+
-+	cf->socket.pci_irq = irq;
-+	cf->socket.ops = &at32_cf_ops;
-+	cf->socket.resource_ops = &pccard_static_ops;
-+	cf->socket.dev.parent = &pdev->dev;
-+	cf->socket.owner = THIS_MODULE;
-+	cf->socket.features =
-+		SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
-+	cf->socket.map_size = CF_RES_SIZE;
-+
-+	cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
-+	cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
-+	cf->res_attr.name = "attribute";
-+	cf->res_attr.flags = IORESOURCE_MEM;
-+	ret = request_resource(res_skt, &cf->res_attr);
-+	if (ret)
-+		goto err_request_res_attr;
-+
-+	cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
-+	cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
-+	cf->res_mem.name = "memory";
-+	cf->res_mem.flags = IORESOURCE_MEM;
-+	ret = request_resource(res_skt, &cf->res_mem);
-+	if (ret)
-+		goto err_request_res_mem;
-+
-+	cf->res_io.start = res_skt->start + CF_IO_OFFSET;
-+	cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
-+	cf->res_io.name = "io";
-+	cf->res_io.flags = IORESOURCE_MEM;
-+	ret = request_resource(res_skt, &cf->res_io);
-+	if (ret)
-+		goto err_request_res_io;
-+
-+	cf->socket.io_offset = cf->res_io.start;
-+
-+	if (cf->detect_pin >= 0) {
-+		ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
-+				  IRQF_SHARED, "cf_detect", cf);
-+		if (ret) {
-+			debug(cf, 1,
-+			      "failed to request cf_detect interrupt\n");
-+			goto err_detect_irq;
-+		}
-+	}
-+
-+	/* Setup SMC timings */
-+	cf->smc.ncs_read_setup = 30;
-+	cf->smc.nrd_setup = 75;
-+	cf->smc.ncs_write_setup = 30;
-+	cf->smc.nwe_setup = 75;
-+
-+	cf->smc.ncs_read_pulse = 240;
-+	cf->smc.nrd_pulse = 165;
-+	cf->smc.ncs_write_pulse = 240;
-+	cf->smc.nwe_pulse = 165;
-+
-+	cf->smc.read_cycle = 300;
-+	cf->smc.write_cycle = 300;
-+
-+	cf->smc.bus_width = 2;
-+	cf->smc.nrd_controlled = 1;
-+	cf->smc.nwe_controlled = 1;
-+	cf->smc.nwait_mode = 0;
-+	cf->smc.byte_write = 0;
-+	cf->smc.tdf_cycles = 1;
-+	cf->smc.tdf_mode = 0;
-+
-+	ret = smc_set_configuration(cf->cf_cs, &cf->smc);
-+	if (ret) {
-+		debug(cf, 1, "failed to configure SMC\n", ret);
-+		goto err_smc;
-+	}
-+
-+	ret = pcmcia_register_socket(&cf->socket);
-+	if (ret) {
-+		debug(cf, 1, "failed to register socket: %d\n", ret);
-+		goto err_register_socket;
-+	}
-+
-+	if (cf->reset_pin >= 0) {
-+		gpio_direction_output(cf->reset_pin, 0);
-+	}
-+
-+	platform_set_drvdata(pdev, cf);
-+
-+	dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
-+		 (unsigned long)res_skt->start);
-+
-+	return 0;
-+
-+err_register_socket:
-+err_smc:
-+	if (cf->detect_pin >= 0)
-+		free_irq(gpio_to_irq(cf->detect_pin), cf);
-+err_detect_irq:
-+	release_resource(&cf->res_io);
-+err_request_res_io:
-+	release_resource(&cf->res_mem);
-+err_request_res_mem:
-+	release_resource(&cf->res_attr);
-+err_request_res_attr:
-+	if (cf->vcc_pin >= 0)
-+		gpio_free(cf->vcc_pin);
-+	if (cf->reset_pin >= 0)
-+		gpio_free(cf->reset_pin);
-+	if (cf->detect_pin >= 0)
-+		gpio_free(cf->detect_pin);
-+	kfree(cf);
-+
-+	return ret;
-+}
-+
-+static int __exit at32_cf_remove(struct platform_device *pdev)
-+{
-+	struct at32_cf_socket *cf = platform_get_drvdata(pdev);
-+
-+	pcmcia_unregister_socket(&cf->socket);
-+	if (cf->detect_pin >= 0) {
-+		free_irq(gpio_to_irq(cf->detect_pin), cf);
-+		gpio_free(cf->detect_pin);
-+	}
-+	if (cf->vcc_pin >= 0)
-+		gpio_free(cf->vcc_pin);
-+	if (cf->reset_pin >= 0)
-+		gpio_free(cf->reset_pin);
-+
-+	release_resource(&cf->res_io);
-+	release_resource(&cf->res_mem);
-+	release_resource(&cf->res_attr);
-+	kfree(cf);
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver at32_cf_driver = {
-+	.remove		= __exit_p(at32_cf_remove),
-+	.driver		= {
-+		.name	= "at32_cf",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init at32_cf_init(void)
-+{
-+	int ret;
-+
-+	ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
-+	if (ret)
-+		printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
-+	return ret;
-+}
-+
-+static void __exit at32_cf_exit(void)
-+{
-+	platform_driver_unregister(&at32_cf_driver);
-+}
-+
-+module_init(at32_cf_init);
-+module_exit(at32_cf_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
-index d154dee..5a464ec 100644
---- a/drivers/pcmcia/cistpl.c
-+++ b/drivers/pcmcia/cistpl.c
-@@ -1091,7 +1091,7 @@ static int parse_cftable_entry(tuple_t *tuple,
- 	break;
-     case 0x20:
- 	entry->mem.nwin = 1;
--	entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8;
-+	entry->mem.win[0].len = (p[0] << 8) | (p[1] << 16);
- 	entry->mem.win[0].card_addr = 0;
- 	entry->mem.win[0].host_addr = 0;
- 	p += 2;
-@@ -1099,9 +1099,8 @@ static int parse_cftable_entry(tuple_t *tuple,
- 	break;
-     case 0x40:
- 	entry->mem.nwin = 1;
--	entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8;
--	entry->mem.win[0].card_addr =
--	    le16_to_cpu(*(__le16 *)(p+2)) << 8;
-+	entry->mem.win[0].len = (p[0] << 8) | (p[1] << 16);
-+	entry->mem.win[0].card_addr = (p[2] << 8) | (p[3] << 16);
- 	entry->mem.win[0].host_addr = 0;
- 	p += 4;
- 	if (p > q) return CS_BAD_TUPLE;
-diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
-index 95826b9..ee96d77 100644
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -313,6 +313,13 @@ config RTC_DRV_PL031
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called rtc-pl031.
- 
-+config RTC_DRV_AT32AP700X
-+	tristate "AT32AP700X series RTC"
-+	depends on RTC_CLASS && PLATFORM_AT32AP
-+	help
-+	  Driver for the internal RTC (Realtime Clock) on Atmel AVR32
-+	  AT32AP700x family processors.
-+
- config RTC_DRV_AT91RM9200
- 	tristate "AT91RM9200"
- 	depends on RTC_CLASS && ARCH_AT91RM9200
-diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
-index 92bfe1b..d36d987 100644
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
- obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
- obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
- obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
-+obj-$(CONFIG_RTC_DRV_AT32AP700X)	+= rtc-at32ap700x.o
- obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
- obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
- obj-$(CONFIG_RTC_DRV_DS1742)	+= rtc-ds1742.o
-diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
-new file mode 100644
-index 0000000..a59b7c1
---- /dev/null
-+++ b/drivers/rtc/rtc-at32ap700x.c
-@@ -0,0 +1,319 @@
-+/*
-+ * An RTC driver for the AVR32 AT32AP700x processor series
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/rtc.h>
-+
-+#include <asm/io.h>
-+
-+/* This is a bare-bones RTC. It runs during most system sleep states, but has
-+ * no battery backup and gets reset during system restart.  It must be
-+ * initialized from an external clock (network, I2C, etc) before it can be of
-+ * much use.
-+ *
-+ * The alarm functionality is limited by the hardware, not supporting periodic
-+ * interrupts.
-+ */
-+
-+#define RTC_CTRL		0x00
-+#define RTC_CTRL_EN		   0
-+#define RTC_CTRL_PCLR		   1
-+#define RTC_CTRL_TOPEN		   2
-+#define RTC_CTRL_PSEL		   8
-+
-+#define RTC_VAL			0x04
-+
-+#define RTC_TOP			0x08
-+
-+#define RTC_IER			0x10
-+#define RTC_IER_TOPI		   0
-+
-+#define RTC_IDR			0x14
-+#define RTC_IDR_TOPI		   0
-+
-+#define RTC_IMR			0x18
-+#define RTC_IMR_TOPI		   0
-+
-+#define RTC_ISR			0x1c
-+#define RTC_ISR_TOPI		   0
-+
-+#define RTC_ICR			0x20
-+#define RTC_ICR_TOPI		   0
-+
-+#define RTC_BIT(name)		(1 << RTC_##name)
-+#define RTC_BF(name,value)	((value) << RTC_##name)
-+
-+#define rtc_readl(dev,reg)				\
-+	__raw_readl((dev)->regs + RTC_##reg)
-+#define rtc_writel(dev,reg,value)			\
-+	__raw_writel((value), (dev)->regs + RTC_##reg)
-+
-+struct rtc_at32ap700x {
-+	struct rtc_device	*rtc;
-+	void __iomem		*regs;
-+	unsigned long		alarm_time;
-+	unsigned long		irq;
-+	spinlock_t		lock;
-+};
-+
-+static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm)
-+{
-+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+	unsigned long now;
-+
-+	now = rtc_readl(rtc, VAL);
-+	rtc_time_to_tm(now, tm);
-+
-+	return 0;
-+}
-+
-+static int at32_rtc_settime(struct device *dev, struct rtc_time *tm)
-+{
-+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+	unsigned long now;
-+	int ret;
-+
-+	ret = rtc_tm_to_time(tm, &now);
-+	if (ret == 0)
-+		rtc_writel(rtc, VAL, now);
-+
-+	return ret;
-+}
-+
-+static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+	struct rtc_time tm;
-+
-+	rtc_time_to_tm(rtc->alarm_time, &tm);
-+	alrm->time = tm;
-+	alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
-+
-+	return 0;
-+}
-+
-+static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+	struct rtc_time	tm;
-+	unsigned long rtc_unix_time;
-+	unsigned long alarm_unix_time;
-+	int ret;
-+
-+	rtc_unix_time = rtc_readl(rtc, VAL);
-+	rtc_time_to_tm(rtc_unix_time, &tm);
-+
-+	/* RTC does only support one alarm time, not periodic */
-+	if (alrm->time.tm_mday < 1) {
-+		alrm->time.tm_mday  = tm.tm_mday;
-+		alrm->time.tm_mon   = tm.tm_mon;
-+		alrm->time.tm_year  = tm.tm_year;
-+		alrm->time.tm_wday  = tm.tm_wday;
-+		alrm->time.tm_yday  = tm.tm_yday;
-+	}
-+
-+	ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time);
-+	if (ret)
-+		return ret;
-+
-+	if (alarm_unix_time < rtc_unix_time)
-+		return -EINVAL;
-+
-+	spin_lock_irq(&rtc->lock);
-+	rtc->alarm_time = alarm_unix_time;
-+	rtc_writel(rtc, TOP, rtc->alarm_time);
-+	if (alrm->pending)
-+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+				| RTC_BIT(CTRL_TOPEN));
-+	else
-+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+				& ~RTC_BIT(CTRL_TOPEN));
-+	spin_unlock_irq(&rtc->lock);
-+
-+	return ret;
-+}
-+
-+static int at32_rtc_ioctl(struct device *dev, unsigned int cmd,
-+			unsigned long arg)
-+{
-+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+	int ret = 0;
-+
-+	switch (cmd) {
-+	case RTC_AIE_ON:
-+		spin_lock_irq(&rtc->lock);
-+		if (rtc_readl(rtc, VAL) > rtc->alarm_time)
-+			return -EINVAL;
-+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+				| RTC_BIT(CTRL_TOPEN));
-+		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+		rtc_writel(rtc, IER, RTC_BIT(IER_TOPI));
-+		spin_unlock_irq(&rtc->lock);
-+		break;
-+	case RTC_AIE_OFF:
-+		spin_lock_irq(&rtc->lock);
-+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+				& ~RTC_BIT(CTRL_TOPEN));
-+		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+		spin_unlock_irq(&rtc->lock);
-+		break;
-+	default:
-+		ret = -ENOIOCTLCMD;
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id)
-+{
-+	struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id;
-+	unsigned long isr = rtc_readl(rtc, ISR);
-+	unsigned long events = 0;
-+
-+	spin_lock(&rtc->lock);
-+
-+	if (isr & RTC_BIT(ISR_TOPI)) {
-+		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+				& ~RTC_BIT(CTRL_TOPEN));
-+		rtc_writel(rtc, VAL, rtc->alarm_time);
-+		events = RTC_AF | RTC_IRQF;
-+		rtc_update_irq(&rtc->rtc->class_dev, 1, events);
-+	}
-+
-+	spin_unlock(&rtc->lock);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static struct rtc_class_ops at32_rtc_ops = {
-+	.ioctl		= at32_rtc_ioctl,
-+	.read_time	= at32_rtc_readtime,
-+	.set_time	= at32_rtc_settime,
-+	.read_alarm	= at32_rtc_readalarm,
-+	.set_alarm	= at32_rtc_setalarm,
-+};
-+
-+static int __devinit at32_rtc_probe(struct platform_device *pdev)
-+{
-+	struct resource	*regs;
-+	struct rtc_at32ap700x *rtc;
-+	int irq = -1;
-+	int ret;
-+
-+	rtc = kmalloc(sizeof(struct rtc_at32ap700x), GFP_KERNEL);
-+	if (!rtc) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		printk(KERN_ERR "rtc: no mmio resource defined for RTC\n");
-+		ret = -ENXIO;
-+		goto out;
-+	}
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0) {
-+		printk(KERN_ERR "rtc: could not get irq\n");
-+		ret = -ENXIO;
-+		goto out;
-+	}
-+
-+	ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
-+	if (ret) {
-+		printk(KERN_ERR "rtc: could not request irq%d\n", irq);
-+		goto out;
-+	}
-+
-+	rtc->irq = irq;
-+	rtc->alarm_time = 0;
-+	rtc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	spin_lock_init(&rtc->lock);
-+
-+	/* Maybe init RTC: count from zero at 1 Hz, disable wrap irq */
-+	/* Do not reset VAL register, as it can hold an old time
-+	 * from last JTAG reset. */
-+	if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) {
-+		rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR));
-+		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+		rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe)
-+				| RTC_BIT(CTRL_EN));
-+	}
-+
-+	/* REVISIT init in arch code if wdt or rtc is enabled; this
-+	 * affects both...
-+	 */
-+
-+	rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
-+				&at32_rtc_ops, THIS_MODULE);
-+	if (IS_ERR(rtc->rtc)) {
-+		ret = PTR_ERR(rtc->rtc);
-+		goto out_free_irq;
-+	}
-+
-+	platform_set_drvdata(pdev, rtc);
-+
-+	printk(KERN_INFO "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
-+			(unsigned long)rtc->regs, rtc->irq);
-+
-+	return 0;
-+
-+out_free_irq:
-+	free_irq(irq, rtc);
-+	iounmap(rtc->regs);
-+out:
-+	kfree(rtc);
-+	return ret;
-+}
-+
-+static int __devexit at32_rtc_remove(struct platform_device *pdev)
-+{
-+	struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
-+
-+	if (rtc->irq >= 0)
-+		free_irq(rtc->irq, rtc);
-+	if (rtc->regs)
-+		iounmap(rtc->regs);
-+	rtc_device_unregister(rtc->rtc);
-+	kfree(rtc);
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver at32_rtc_driver = {
-+	.remove		= __exit_p(at32_rtc_remove),
-+	.driver		= {
-+		.name	= "rtc",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init at32_rtc_init(void)
-+{
-+	return platform_driver_probe(&at32_rtc_driver, at32_rtc_probe);
-+}
-+
-+static void __exit at32_rtc_exit(void)
-+{
-+	platform_driver_unregister(&at32_rtc_driver);
-+}
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Real time counter for AVR32 AT32AP700x");
-+MODULE_LICENSE("GPL");
-+
-+module_init(at32_rtc_init);
-+module_exit(at32_rtc_exit);
-diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
-index 935f48f..4d6b3c5 100644
---- a/drivers/serial/atmel_serial.c
-+++ b/drivers/serial/atmel_serial.c
-@@ -114,6 +114,7 @@ struct atmel_uart_port {
- 	struct uart_port	uart;		/* uart */
- 	struct clk		*clk;		/* uart clock */
- 	unsigned short		suspended;	/* is port suspended? */
-+	int			break_active;	/* break being received */
- };
- 
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-@@ -252,6 +253,7 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
-  */
- static void atmel_rx_chars(struct uart_port *port)
- {
-+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- 	struct tty_struct *tty = port->info->tty;
- 	unsigned int status, ch, flg;
- 
-@@ -267,13 +269,29 @@ static void atmel_rx_chars(struct uart_port *port)
- 		 * note that the error handling code is
- 		 * out of the main execution path
- 		 */
--		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
-+		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
-+				       | ATMEL_US_OVRE | ATMEL_US_RXBRK)
-+			     || atmel_port->break_active)) {
- 			UART_PUT_CR(port, ATMEL_US_RSTSTA);	/* clear error */
--			if (status & ATMEL_US_RXBRK) {
-+			if (status & ATMEL_US_RXBRK
-+			    && !atmel_port->break_active) {
- 				status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
- 				port->icount.brk++;
-+				atmel_port->break_active = 1;
-+				UART_PUT_IER(port, ATMEL_US_RXBRK);
- 				if (uart_handle_break(port))
- 					goto ignore_char;
-+			} else {
-+				/*
-+				 * This is either the end-of-break
-+				 * condition or we've received at
-+				 * least one character without RXBRK
-+				 * being set. In both cases, the next
-+				 * RXBRK will indicate start-of-break.
-+				 */
-+				UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+				status &= ~ATMEL_US_RXBRK;
-+				atmel_port->break_active = 0;
- 			}
- 			if (status & ATMEL_US_PARE)
- 				port->icount.parity++;
-@@ -352,6 +370,16 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
- 		/* Interrupt receive */
- 		if (pending & ATMEL_US_RXRDY)
- 			atmel_rx_chars(port);
-+		else if (pending & ATMEL_US_RXBRK) {
-+			/*
-+			 * End of break detected. If it came along
-+			 * with a character, atmel_rx_chars will
-+			 * handle it.
-+			 */
-+			UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+			UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+			atmel_port->break_active = 0;
-+		}
- 
- 		// TODO: All reads to CSR will clear these interrupts!
- 		if (pending & ATMEL_US_RIIC) port->icount.rng++;
-@@ -484,11 +512,16 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
- 	unsigned long flags;
- 	unsigned int mode, imr, quot, baud;
- 
-+	/* Get current mode register */
-+	mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
-+
- 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- 	quot = uart_get_divisor(port, baud);
- 
--	/* Get current mode register */
--	mode = UART_GET_MR(port) & ~(ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
-+	if (quot > 65535) {		/* BRGR is 16-bit, so switch to slower clock */
-+		quot /= 8;
-+		mode |= ATMEL_US_USCLKS_MCK_DIV8;
-+	}
- 
- 	/* byte size */
- 	switch (termios->c_cflag & CSIZE) {
-diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h
-index 11b4436..e014177 100644
---- a/drivers/serial/atmel_serial.h
-+++ b/drivers/serial/atmel_serial.h
-@@ -46,6 +46,9 @@
- #define			ATMEL_US_USMODE_ISO7816_T1	6
- #define			ATMEL_US_USMODE_IRDA		8
- #define		ATMEL_US_USCLKS		(3   <<  4)		/* Clock Selection */
-+#define			ATMEL_US_USCLKS_MCK		(0 <<  4)
-+#define			ATMEL_US_USCLKS_MCK_DIV8	(1 <<  4)
-+#define			ATMEL_US_USCLKS_SCK		(3 <<  4)
- #define		ATMEL_US_CHRL		(3   <<  6)		/* Character Length */
- #define			ATMEL_US_CHRL_5			(0 <<  6)
- #define			ATMEL_US_CHRL_6			(1 <<  6)
-diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
-index 66e7bc9..8f5453f 100644
---- a/drivers/spi/atmel_spi.c
-+++ b/drivers/spi/atmel_spi.c
-@@ -22,10 +22,7 @@
- #include <asm/io.h>
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--
--#ifdef CONFIG_ARCH_AT91
- #include <asm/arch/cpu.h>
--#endif
- 
- #include "atmel_spi.h"
- 
-@@ -116,16 +113,16 @@ static void atmel_spi_next_xfer(struct spi_master *master,
- 
- 	len = as->remaining_bytes;
- 
--	tx_dma = xfer->tx_dma;
--	rx_dma = xfer->rx_dma;
-+	tx_dma = xfer->tx_dma + xfer->len - len;
-+	rx_dma = xfer->rx_dma + xfer->len - len;
- 
- 	/* use scratch buffer only when rx or tx data is unspecified */
--	if (rx_dma == INVALID_DMA_ADDRESS) {
-+	if (!xfer->rx_buf) {
- 		rx_dma = as->buffer_dma;
- 		if (len > BUFFER_SIZE)
- 			len = BUFFER_SIZE;
- 	}
--	if (tx_dma == INVALID_DMA_ADDRESS) {
-+	if (!xfer->tx_buf) {
- 		tx_dma = as->buffer_dma;
- 		if (len > BUFFER_SIZE)
- 			len = BUFFER_SIZE;
-@@ -415,8 +412,8 @@ static int atmel_spi_setup(struct spi_device *spi)
- 		csr |= SPI_BIT(NCPHA);
- 
- 	/* TODO: DLYBS and DLYBCT */
--	csr |= SPI_BF(DLYBS, 10);
--	csr |= SPI_BF(DLYBCT, 10);
-+	csr |= SPI_BF(DLYBS, 0);
-+	csr |= SPI_BF(DLYBCT, 0);
- 
- 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
- 	npcs_pin = (unsigned int)spi->controller_data;
-@@ -552,10 +549,8 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
- 		goto out_free_buffer;
- 	as->irq = irq;
- 	as->clk = clk;
--#ifdef CONFIG_ARCH_AT91
- 	if (!cpu_is_at91rm9200())
- 		as->new_1 = 1;
--#endif
- 
- 	ret = request_irq(irq, atmel_spi_interrupt, 0,
- 			pdev->dev.bus_id, master);
-diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
-index 8372ace..2fcbbd4 100644
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -674,6 +674,22 @@ config FB_S1D13XXX
- 	  working with S1D13806). Product specs at
- 	  <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
- 
-+config FB_ATMEL
-+	tristate "AT91/AT32 LCD Controller support"
-+	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This enables support for the AT91/AT32 LCD Controller.
-+
-+config FB_INTSRAM
-+	bool "Frame Buffer in internal SRAM"
-+	depends on FB_ATMEL && ARCH_AT91SAM9261
-+	help
-+	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
-+	  to let frame buffer in external SDRAM.
-+
- config FB_NVIDIA
- 	tristate "nVidia Framebuffer Support"
- 	depends on FB && PCI
-diff --git a/drivers/video/Makefile b/drivers/video/Makefile
-index 760305c..17a09c6 100644
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -75,6 +75,7 @@ obj-$(CONFIG_FB_G364)             += g364fb.o
- obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
- obj-$(CONFIG_FB_HIT)              += hitfb.o
- obj-$(CONFIG_FB_EPSON1355)	  += epson1355fb.o
-+obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
- obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
-diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
-new file mode 100644
-index 0000000..e1d5bd0
---- /dev/null
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -0,0 +1,752 @@
-+/*
-+ *  Driver for AT91/AT32 LCD Controller
-+ *
-+ *  Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/gpio.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#define lcdc_readl(sinfo, reg)		__raw_readl((sinfo)->mmio+(reg))
-+#define lcdc_writel(sinfo, reg, val)	__raw_writel((val), (sinfo)->mmio+(reg))
-+
-+/* configurable parameters */
-+#define ATMEL_LCDC_CVAL_DEFAULT		0xc8
-+#define ATMEL_LCDC_DMA_BURST_LEN	8
-+
-+#if defined(CONFIG_ARCH_AT91SAM9263)
-+#define ATMEL_LCDC_FIFO_SIZE		2048
-+#else
-+#define ATMEL_LCDC_FIFO_SIZE		512
-+#endif
-+
-+#if defined(CONFIG_ARCH_AT91)
-+#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
-+
-+static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
-+					struct fb_var_screeninfo *var)
-+{
-+
-+}
-+#elif defined(CONFIG_AVR32)
-+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
-+					| FBINFO_PARTIAL_PAN_OK \
-+					| FBINFO_HWACCEL_XPAN \
-+					| FBINFO_HWACCEL_YPAN)
-+
-+static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
-+				     struct fb_var_screeninfo *var)
-+{
-+	u32 dma2dcfg;
-+	u32 pixeloff;
-+
-+	pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
-+
-+	dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
-+	dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
-+
-+	/* Update configuration */
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
-+		    lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
-+		    | ATMEL_LCDC_DMAUPDT);
-+}
-+#endif
-+
-+
-+static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
-+	.type		= FB_TYPE_PACKED_PIXELS,
-+	.visual		= FB_VISUAL_TRUECOLOR,
-+	.xpanstep	= 0,
-+	.ypanstep	= 0,
-+	.ywrapstep	= 0,
-+	.accel		= FB_ACCEL_NONE,
-+};
-+
-+
-+static void atmel_lcdfb_update_dma(struct fb_info *info,
-+			       struct fb_var_screeninfo *var)
-+{
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+	struct fb_fix_screeninfo *fix = &info->fix;
-+	unsigned long dma_addr;
-+
-+	dma_addr = (fix->smem_start + var->yoffset * fix->line_length
-+		    + var->xoffset * var->bits_per_pixel / 8);
-+
-+	dma_addr &= ~3UL;
-+
-+	/* Set framebuffer DMA base address and pixel offset */
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
-+
-+	atmel_lcdfb_update_dma2d(sinfo, var);
-+}
-+
-+static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
-+{
-+	struct fb_info *info = sinfo->info;
-+
-+	dma_free_writecombine(info->device, info->fix.smem_len,
-+				info->screen_base, info->fix.smem_start);
-+}
-+
-+/**
-+ *	atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
-+ *	@sinfo: the frame buffer to allocate memory for
-+ */
-+static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
-+{
-+	struct fb_info *info = sinfo->info;
-+	struct fb_var_screeninfo *var = &info->var;
-+
-+	info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-+			    * ((var->bits_per_pixel + 7) / 8));
-+
-+	info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
-+					(dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
-+
-+	if (!info->screen_base) {
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ *      atmel_lcdfb_check_var - Validates a var passed in.
-+ *      @var: frame buffer variable screen structure
-+ *      @info: frame buffer structure that represents a single frame buffer
-+ *
-+ *	Checks to see if the hardware supports the state requested by
-+ *	var passed in. This function does not alter the hardware
-+ *	state!!!  This means the data stored in struct fb_info and
-+ *	struct atmel_lcdfb_info do not change. This includes the var
-+ *	inside of struct fb_info.  Do NOT change these. This function
-+ *	can be called on its own if we intent to only test a mode and
-+ *	not actually set it. The stuff in modedb.c is a example of
-+ *	this. If the var passed in is slightly off by what the
-+ *	hardware can support then we alter the var PASSED in to what
-+ *	we can do. If the hardware doesn't support mode change a
-+ *	-EINVAL will be returned by the upper layers. You don't need
-+ *	to implement this function then. If you hardware doesn't
-+ *	support changing the resolution then this function is not
-+ *	needed. In this case the driver would just provide a var that
-+ *	represents the static state the screen is in.
-+ *
-+ *	Returns negative errno on error, or zero on success.
-+ */
-+static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
-+			     struct fb_info *info)
-+{
-+	struct device *dev = info->device;
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+	unsigned long clk_value_khz;
-+
-+	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-+
-+	dev_dbg(dev, "%s:\n", __func__);
-+	dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
-+	dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
-+	dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
-+	dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
-+
-+	if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
-+		dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
-+		return -EINVAL;
-+	}
-+
-+	/* Force same alignment for each line */
-+	var->xres = (var->xres + 3) & ~3UL;
-+	var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
-+
-+	var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
-+	var->transp.msb_right = 0;
-+	var->transp.offset = var->transp.length = 0;
-+	var->xoffset = var->yoffset = 0;
-+
-+	switch (var->bits_per_pixel) {
-+	case 2:
-+	case 4:
-+	case 8:
-+		var->red.offset = var->green.offset = var->blue.offset = 0;
-+		var->red.length = var->green.length = var->blue.length
-+			= var->bits_per_pixel;
-+		break;
-+	case 15:
-+	case 16:
-+		var->red.offset = 0;
-+		var->green.offset = 5;
-+		var->blue.offset = 10;
-+		var->red.length = var->green.length = var->blue.length = 5;
-+		break;
-+	case 24:
-+	case 32:
-+		var->red.offset = 0;
-+		var->green.offset = 8;
-+		var->blue.offset = 16;
-+		var->red.length = var->green.length = var->blue.length = 8;
-+		break;
-+	default:
-+		dev_err(dev, "color depth %d not supported\n",
-+					var->bits_per_pixel);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ *      atmel_lcdfb_set_par - Alters the hardware state.
-+ *      @info: frame buffer structure that represents a single frame buffer
-+ *
-+ *	Using the fb_var_screeninfo in fb_info we set the resolution
-+ *	of the this particular framebuffer. This function alters the
-+ *	par AND the fb_fix_screeninfo stored in fb_info. It doesn't
-+ *	not alter var in fb_info since we are using that data. This
-+ *	means we depend on the data in var inside fb_info to be
-+ *	supported by the hardware.  atmel_lcdfb_check_var is always called
-+ *	before atmel_lcdfb_set_par to ensure this.  Again if you can't
-+ *	change the resolution you don't need this function.
-+ *
-+ */
-+static int atmel_lcdfb_set_par(struct fb_info *info)
-+{
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+	unsigned long value;
-+	unsigned long clk_value_khz;
-+
-+	dev_dbg(info->device, "%s:\n", __func__);
-+	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
-+		 info->var.xres, info->var.yres,
-+		 info->var.xres_virtual, info->var.yres_virtual);
-+
-+	/* Turn off the LCD controller and the DMA controller */
-+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-+
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-+
-+	if (info->var.bits_per_pixel <= 8)
-+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-+	else
-+		info->fix.visual = FB_VISUAL_TRUECOLOR;
-+
-+	info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
-+
-+	/* Re-initialize the DMA engine... */
-+	dev_dbg(info->device, "  * update DMA engine\n");
-+	atmel_lcdfb_update_dma(info, &info->var);
-+
-+	/* ...set frame size and burst length = 8 words (?) */
-+	value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
-+	value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
-+
-+	/* Now, the LCDC core... */
-+
-+	/* Set pixel clock */
-+	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-+
-+	value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
-+
-+	if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
-+		value++;
-+
-+	value = (value / 2) - 1;
-+
-+	if (value <= 0) {
-+		dev_notice(info->device, "Bypassing pixel clock divider\n");
-+		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
-+	} else
-+		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
-+
-+	/* Initialize control register 2 */
-+	value = sinfo->default_lcdcon2;
-+
-+	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-+		value |= ATMEL_LCDC_INVLINE_INVERTED;
-+	if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-+		value |= ATMEL_LCDC_INVFRAME_INVERTED;
-+
-+	switch (info->var.bits_per_pixel) {
-+		case 1:	value |= ATMEL_LCDC_PIXELSIZE_1; break;
-+		case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
-+		case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
-+		case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
-+		case 15: /* fall through */
-+		case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
-+		case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
-+		case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
-+		default: BUG(); break;
-+	}
-+	dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
-+	lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
-+
-+	/* Vertical timing */
-+	value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
-+	value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
-+	value |= info->var.lower_margin;
-+	dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
-+	lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
-+
-+	/* Horizontal timing */
-+	value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
-+	value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
-+	value |= (info->var.left_margin - 1);
-+	dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
-+	lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
-+
-+	/* Display size */
-+	value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
-+	value |= info->var.yres - 1;
-+	lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
-+
-+	/* FIFO Threshold: Use formula from data sheet */
-+	value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
-+	lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
-+
-+	/* Toggle LCD_MODE every frame */
-+	lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
-+
-+	/* Disable all interrupts */
-+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
-+
-+	/* Set contrast */
-+	value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
-+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
-+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
-+	/* ...wait for DMA engine to become idle... */
-+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
-+		msleep(10);
-+
-+	dev_dbg(info->device, "  * re-enable DMA engine\n");
-+	/* ...and enable it with updated configuration */
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-+
-+	dev_dbg(info->device, "  * re-enable LCDC core\n");
-+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-+		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-+
-+	dev_dbg(info->device, "  * DONE\n");
-+
-+	return 0;
-+}
-+
-+static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
-+{
-+	chan &= 0xffff;
-+	chan >>= 16 - bf->length;
-+	return chan << bf->offset;
-+}
-+
-+/**
-+ *  	atmel_lcdfb_setcolreg - Optional function. Sets a color register.
-+ *      @regno: Which register in the CLUT we are programming
-+ *      @red: The red value which can be up to 16 bits wide
-+ *	@green: The green value which can be up to 16 bits wide
-+ *	@blue:  The blue value which can be up to 16 bits wide.
-+ *	@transp: If supported the alpha value which can be up to 16 bits wide.
-+ *      @info: frame buffer info structure
-+ *
-+ *  	Set a single color register. The values supplied have a 16 bit
-+ *  	magnitude which needs to be scaled in this function for the hardware.
-+ *	Things to take into consideration are how many color registers, if
-+ *	any, are supported with the current color visual. With truecolor mode
-+ *	no color palettes are supported. Here a psuedo palette is created
-+ *	which we store the value in pseudo_palette in struct fb_info. For
-+ *	pseudocolor mode we have a limited color palette. To deal with this
-+ *	we can program what color is displayed for a particular pixel value.
-+ *	DirectColor is similar in that we can program each color field. If
-+ *	we have a static colormap we don't need to implement this function.
-+ *
-+ *	Returns negative errno on error, or zero on success. In an
-+ *	ideal world, this would have been the case, but as it turns
-+ *	out, the other drivers return 1 on failure, so that's what
-+ *	we're going to do.
-+ */
-+static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
-+			     unsigned int green, unsigned int blue,
-+			     unsigned int transp, struct fb_info *info)
-+{
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+	unsigned int val;
-+	u32 *pal;
-+	int ret = 1;
-+
-+	if (info->var.grayscale)
-+		red = green = blue = (19595 * red + 38470 * green
-+				      + 7471 * blue) >> 16;
-+
-+	switch (info->fix.visual) {
-+	case FB_VISUAL_TRUECOLOR:
-+		if (regno < 16) {
-+			pal = info->pseudo_palette;
-+
-+			val  = chan_to_field(red, &info->var.red);
-+			val |= chan_to_field(green, &info->var.green);
-+			val |= chan_to_field(blue, &info->var.blue);
-+
-+			pal[regno] = val;
-+			ret = 0;
-+		}
-+		break;
-+
-+	case FB_VISUAL_PSEUDOCOLOR:
-+		if (regno < 256) {
-+			val  = ((red   >> 11) & 0x001f);
-+			val |= ((green >>  6) & 0x03e0);
-+			val |= ((blue  >>  1) & 0x7c00);
-+
-+			/*
-+			 * TODO: intensity bit. Maybe something like
-+			 *   ~(red[10] ^ green[10] ^ blue[10]) & 1
-+			 */
-+
-+			lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
-+			ret = 0;
-+		}
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
-+			       struct fb_info *info)
-+{
-+	dev_dbg(info->device, "%s\n", __func__);
-+
-+	atmel_lcdfb_update_dma(info, var);
-+
-+	return 0;
-+}
-+
-+static struct fb_ops atmel_lcdfb_ops = {
-+	.owner		= THIS_MODULE,
-+	.fb_check_var	= atmel_lcdfb_check_var,
-+	.fb_set_par	= atmel_lcdfb_set_par,
-+	.fb_setcolreg	= atmel_lcdfb_setcolreg,
-+	.fb_pan_display	= atmel_lcdfb_pan_display,
-+	.fb_fillrect	= cfb_fillrect,
-+	.fb_copyarea	= cfb_copyarea,
-+	.fb_imageblit	= cfb_imageblit,
-+};
-+
-+static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
-+{
-+	struct fb_info *info = dev_id;
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+	u32 status;
-+
-+	status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
-+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
-+	return IRQ_HANDLED;
-+}
-+
-+static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
-+{
-+	struct fb_info *info = sinfo->info;
-+	int ret = 0;
-+
-+	memset_io(info->screen_base, 0, info->fix.smem_len);
-+	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
-+
-+	dev_info(info->device,
-+	       "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+	       (unsigned long)info->fix.smem_len / 1024,
-+	       (unsigned long)info->fix.smem_start,
-+	       info->screen_base);
-+
-+	/* Allocate colormap */
-+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
-+	if (ret < 0)
-+		dev_err(info->device, "Alloc color map failed\n");
-+
-+	return ret;
-+}
-+
-+static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
-+{
-+	if (sinfo->bus_clk)
-+		clk_enable(sinfo->bus_clk);
-+	clk_enable(sinfo->lcdc_clk);
-+}
-+
-+static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
-+{
-+	if (sinfo->bus_clk)
-+		clk_disable(sinfo->bus_clk);
-+	clk_disable(sinfo->lcdc_clk);
-+}
-+
-+
-+static int __init atmel_lcdfb_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fb_info *info;
-+	struct atmel_lcdfb_info *sinfo;
-+	struct atmel_lcdfb_info *pdata_sinfo;
-+	struct resource *regs = NULL;
-+	struct resource *map = NULL;
-+	int ret;
-+
-+	dev_dbg(dev, "%s BEGIN\n", __func__);
-+
-+	ret = -ENOMEM;
-+	info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
-+	if (!info) {
-+		dev_err(dev, "cannot allocate memory\n");
-+		goto out;
-+	}
-+
-+	sinfo = info->par;
-+
-+	if (dev->platform_data) {
-+		pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
-+		sinfo->default_bpp = pdata_sinfo->default_bpp;
-+		sinfo->default_dmacon = pdata_sinfo->default_dmacon;
-+		sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
-+		sinfo->default_monspecs = pdata_sinfo->default_monspecs;
-+		sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
-+		sinfo->guard_time = pdata_sinfo->guard_time;
-+	} else {
-+		dev_err(dev, "cannot get default configuration\n");
-+		goto free_info;
-+	}
-+	sinfo->info = info;
-+	sinfo->pdev = pdev;
-+
-+	strcpy(info->fix.id, sinfo->pdev->name);
-+	info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
-+	info->pseudo_palette = sinfo->pseudo_palette;
-+	info->fbops = &atmel_lcdfb_ops;
-+
-+	memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
-+	info->fix = atmel_lcdfb_fix;
-+
-+	/* Enable LCDC Clocks */
-+	if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
-+		sinfo->bus_clk = clk_get(dev, "hck1");
-+		if (IS_ERR(sinfo->bus_clk)) {
-+			ret = PTR_ERR(sinfo->bus_clk);
-+			goto free_info;
-+		}
-+	}
-+	sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
-+	if (IS_ERR(sinfo->lcdc_clk)) {
-+		ret = PTR_ERR(sinfo->lcdc_clk);
-+		goto put_bus_clk;
-+	}
-+	atmel_lcdfb_start_clock(sinfo);
-+
-+	ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
-+			info->monspecs.modedb_len, info->monspecs.modedb,
-+			sinfo->default_bpp);
-+	if (!ret) {
-+		dev_err(dev, "no suitable video mode found\n");
-+		goto stop_clk;
-+	}
-+
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_err(dev, "resources unusable\n");
-+		ret = -ENXIO;
-+		goto stop_clk;
-+	}
-+
-+	sinfo->irq_base = platform_get_irq(pdev, 0);
-+	if (sinfo->irq_base < 0) {
-+		dev_err(dev, "unable to get irq\n");
-+		ret = sinfo->irq_base;
-+		goto stop_clk;
-+	}
-+
-+	/* Initialize video memory */
-+	map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+	if (map) {
-+		/* use a pre-allocated memory buffer */
-+		info->fix.smem_start = map->start;
-+		info->fix.smem_len = map->end - map->start + 1;
-+		if (!request_mem_region(info->fix.smem_start,
-+					info->fix.smem_len, pdev->name)) {
-+			ret = -EBUSY;
-+			goto stop_clk;
-+		}
-+
-+		info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
-+		if (!info->screen_base)
-+			goto release_intmem;
-+	} else {
-+		/* alocate memory buffer */
-+		ret = atmel_lcdfb_alloc_video_memory(sinfo);
-+		if (ret < 0) {
-+			dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
-+			goto stop_clk;
-+		}
-+	}
-+
-+	/* LCDC registers */
-+	info->fix.mmio_start = regs->start;
-+	info->fix.mmio_len = regs->end - regs->start + 1;
-+
-+	if (!request_mem_region(info->fix.mmio_start,
-+				info->fix.mmio_len, pdev->name)) {
-+		ret = -EBUSY;
-+		goto free_fb;
-+	}
-+
-+	sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+	if (!sinfo->mmio) {
-+		dev_err(dev, "cannot map LCDC registers\n");
-+		goto release_mem;
-+	}
-+
-+	/* interrupt */
-+	ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
-+	if (ret) {
-+		dev_err(dev, "request_irq failed: %d\n", ret);
-+		goto unmap_mmio;
-+	}
-+
-+	ret = atmel_lcdfb_init_fbinfo(sinfo);
-+	if (ret < 0) {
-+		dev_err(dev, "init fbinfo failed: %d\n", ret);
-+		goto unregister_irqs;
-+	}
-+
-+	/*
-+	 * This makes sure that our colour bitfield
-+	 * descriptors are correctly initialised.
-+	 */
-+	atmel_lcdfb_check_var(&info->var, info);
-+
-+	ret = fb_set_var(info, &info->var);
-+	if (ret) {
-+		dev_warn(dev, "unable to set display parameters\n");
-+		goto free_cmap;
-+	}
-+
-+	dev_set_drvdata(dev, info);
-+
-+	/*
-+	 * Tell the world that we're ready to go
-+	 */
-+	ret = register_framebuffer(info);
-+	if (ret < 0) {
-+		dev_err(dev, "failed to register framebuffer device: %d\n", ret);
-+		goto free_cmap;
-+	}
-+
-+	/* Power up the LCDC screen */
-+	if (sinfo->atmel_lcdfb_power_control)
-+		sinfo->atmel_lcdfb_power_control(1);
-+
-+	dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
-+		       info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
-+
-+	return 0;
-+
-+
-+free_cmap:
-+	fb_dealloc_cmap(&info->cmap);
-+unregister_irqs:
-+	free_irq(sinfo->irq_base, info);
-+unmap_mmio:
-+	iounmap(sinfo->mmio);
-+release_mem:
-+ 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+	if (map)
-+		iounmap(info->screen_base);
-+	else
-+		atmel_lcdfb_free_video_memory(sinfo);
-+
-+release_intmem:
-+	if (map)
-+		release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+stop_clk:
-+	atmel_lcdfb_stop_clock(sinfo);
-+	clk_put(sinfo->lcdc_clk);
-+put_bus_clk:
-+	if (sinfo->bus_clk)
-+		clk_put(sinfo->bus_clk);
-+free_info:
-+	framebuffer_release(info);
-+out:
-+	dev_dbg(dev, "%s FAILED\n", __func__);
-+	return ret;
-+}
-+
-+static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fb_info *info = dev_get_drvdata(dev);
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+
-+	if (!sinfo)
-+		return 0;
-+
-+	if (sinfo->atmel_lcdfb_power_control)
-+		sinfo->atmel_lcdfb_power_control(0);
-+	unregister_framebuffer(info);
-+	atmel_lcdfb_stop_clock(sinfo);
-+	clk_put(sinfo->lcdc_clk);
-+	if (sinfo->bus_clk)
-+		clk_put(sinfo->bus_clk);
-+	fb_dealloc_cmap(&info->cmap);
-+	free_irq(sinfo->irq_base, info);
-+	iounmap(sinfo->mmio);
-+ 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+	if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
-+		iounmap(info->screen_base);
-+		release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+	} else {
-+		atmel_lcdfb_free_video_memory(sinfo);
-+	}
-+
-+	dev_set_drvdata(dev, NULL);
-+	framebuffer_release(info);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver atmel_lcdfb_driver = {
-+	.remove		= __exit_p(atmel_lcdfb_remove),
-+	.driver		= {
-+		.name	= "atmel_lcdfb",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init atmel_lcdfb_init(void)
-+{
-+	return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
-+}
-+
-+static void __exit atmel_lcdfb_exit(void)
-+{
-+	platform_driver_unregister(&atmel_lcdfb_driver);
-+}
-+
-+module_init(atmel_lcdfb_init);
-+module_exit(atmel_lcdfb_exit);
-+
-+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
-+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
-index 47d15b5..b59d5bb 100644
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -8,26 +8,44 @@ menuconfig BACKLIGHT_LCD_SUPPORT
- 	  Enable this to be able to choose the drivers for controlling the
- 	  backlight and the LCD panel on some platforms, for example on PDAs.
- 
--config BACKLIGHT_CLASS_DEVICE
--        tristate "Lowlevel Backlight controls"
-+#
-+# LCD
-+#
-+config LCD_CLASS_DEVICE
-+        tristate "Lowlevel LCD controls"
- 	depends on BACKLIGHT_LCD_SUPPORT
- 	default m
- 	help
--	  This framework adds support for low-level control of the LCD
--          backlight. This includes support for brightness and power.
-+	  This framework adds support for low-level control of LCD.
-+	  Some framebuffer devices connect to platform-specific LCD modules
-+	  in order to have a platform-specific way to control the flat panel
-+	  (contrast and applying power to the LCD (not to the backlight!)).
- 
- 	  To have support for your specific LCD panel you will have to
- 	  select the proper drivers which depend on this option.
- 
--config LCD_CLASS_DEVICE
--        tristate "Lowlevel LCD controls"
-+config LCD_LTV350QV
-+	tristate "Samsung LTV350QV LCD Panel"
-+	depends on LCD_CLASS_DEVICE && SPI_MASTER
-+	default n
-+	help
-+	  If you have a Samsung LTV350QV LCD panel, say y to include a
-+	  power control driver for it.  The panel starts up in power
-+	  off state, so you need this driver in order to see any
-+	  output.
-+
-+	  The LTV350QV panel is present on all ATSTK1000 boards.
-+
-+#
-+# Backlight
-+#
-+config BACKLIGHT_CLASS_DEVICE
-+        tristate "Lowlevel Backlight controls"
- 	depends on BACKLIGHT_LCD_SUPPORT
- 	default m
- 	help
--	  This framework adds support for low-level control of LCD.
--	  Some framebuffer devices connect to platform-specific LCD modules
--	  in order to have a platform-specific way to control the flat panel
--	  (contrast and applying power to the LCD (not to the backlight!)).
-+	  This framework adds support for low-level control of the LCD
-+          backlight. This includes support for brightness and power.
- 
- 	  To have support for your specific LCD panel you will have to
- 	  select the proper drivers which depend on this option.
-diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
-index 0c3ce46..526c54b 100644
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -1,6 +1,8 @@
- # Backlight & LCD drivers
- 
- obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
-+obj-$(CONFIG_LCD_LTV350QV)	+= ltv350qv.o
-+
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
-diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
-new file mode 100644
-index 0000000..342b97a
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.c
-@@ -0,0 +1,340 @@
-+/*
-+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/lcd.h>
-+#include <linux/module.h>
-+#include <linux/spi/spi.h>
-+
-+#include "ltv350qv.h"
-+
-+#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
-+
-+struct ltv350qv {
-+	struct spi_device	*spi;
-+	u8			*buffer;
-+	int			power;
-+	struct lcd_device	*ld;
-+};
-+
-+/*
-+ * The power-on and power-off sequences are taken from the
-+ * LTV350QV-F04 data sheet from Samsung. The register definitions are
-+ * taken from the S6F2002 command list also from Samsung. Both
-+ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
-+ *
-+ * There's still some voodoo going on here, but it's a lot better than
-+ * in the first incarnation of the driver where all we had was the raw
-+ * numbers from the initialization sequence.
-+ */
-+static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
-+{
-+	struct spi_message msg;
-+	struct spi_transfer index_xfer = {
-+		.len		= 3,
-+		.cs_change	= 1,
-+	};
-+	struct spi_transfer value_xfer = {
-+		.len		= 3,
-+		.cs_change	= 1,
-+	};
-+
-+	spi_message_init(&msg);
-+
-+	/* register index */
-+	lcd->buffer[0] = LTV_OPC_INDEX;
-+	lcd->buffer[1] = 0x00;
-+	lcd->buffer[2] = reg & 0x7f;
-+	index_xfer.tx_buf = lcd->buffer;
-+	spi_message_add_tail(&index_xfer, &msg);
-+
-+	/* register value */
-+	lcd->buffer[4] = LTV_OPC_DATA;
-+	lcd->buffer[5] = val >> 8;
-+	lcd->buffer[6] = val;
-+	value_xfer.tx_buf = lcd->buffer + 4;
-+	spi_message_add_tail(&value_xfer, &msg);
-+
-+	return spi_sync(lcd->spi, &msg);
-+}
-+
-+/* The comments are taken straight from the data sheet */
-+static int ltv350qv_power_on(struct ltv350qv *lcd)
-+{
-+	int ret;
-+
-+	/* Power On Reset Display off State */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
-+		goto err;
-+	msleep(15);
-+
-+	/* Power Setting Function 1 */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
-+		goto err;
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
-+		goto err_power1;
-+
-+	/* Power Setting Function 2 */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+			       LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+			       | LTV_SUPPLY_CURRENT(5)))
-+		goto err_power2;
-+
-+	msleep(55);
-+
-+	/* Instruction Setting */
-+	ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
-+				 LTV_NMD | LTV_REV | LTV_NL(0x1d));
-+	ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
-+				  LTV_DS_SAME | LTV_CHS_480
-+				  | LTV_DF_RGB | LTV_RGB_BGR);
-+	ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
-+				  LTV_VSPL_ACTIVE_LOW
-+				  | LTV_HSPL_ACTIVE_LOW
-+				  | LTV_DPL_SAMPLE_RISING
-+				  | LTV_EPL_ACTIVE_LOW
-+				  | LTV_SS_RIGHT_TO_LEFT);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_FWI(3));
-+	ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
-+	ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
-+	ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
-+	if (ret)
-+		goto err_settings;
-+
-+	/* Wait more than 2 frames */
-+	msleep(20);
-+
-+	/* Display On Sequence */
-+	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+				 LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
-+				 | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
-+				 | LTV_SUPPLY_CURRENT(5));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
-+	if (ret)
-+		goto err_disp_on;
-+
-+	/* Display should now be ON. Phew. */
-+	return 0;
-+
-+err_disp_on:
-+	/*
-+	 * Try to recover. Error handling probably isn't very useful
-+	 * at this point, just make a best effort to switch the panel
-+	 * off.
-+	 */
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+			   LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+			   | LTV_SUPPLY_CURRENT(5));
-+	ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+			   LTV_NW_INV_1LINE | LTV_FWI(3));
-+err_settings:
-+err_power2:
-+err_power1:
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+	msleep(1);
-+err:
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+	return -EIO;
-+}
-+
-+static int ltv350qv_power_off(struct ltv350qv *lcd)
-+{
-+	int ret;
-+
-+	/* Display Off Sequence */
-+	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+				 LTV_VCOM_DISABLE
-+				 | LTV_DRIVE_CURRENT(5)
-+				 | LTV_SUPPLY_CURRENT(5));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_FWI(3));
-+
-+	/* Power down setting 1 */
-+	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+
-+	/* Wait at least 1 ms */
-+	msleep(1);
-+
-+	/* Power down setting 2 */
-+	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+
-+	/*
-+	 * No point in trying to recover here. If we can't switch the
-+	 * panel off, what are we supposed to do other than inform the
-+	 * user about the failure?
-+	 */
-+	if (ret)
-+		return -EIO;
-+
-+	/* Display power should now be OFF */
-+	return 0;
-+}
-+
-+static int ltv350qv_power(struct ltv350qv *lcd, int power)
-+{
-+	int ret = 0;
-+
-+	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
-+		ret = ltv350qv_power_on(lcd);
-+	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
-+		ret = ltv350qv_power_off(lcd);
-+
-+	if (!ret)
-+		lcd->power = power;
-+
-+	return ret;
-+}
-+
-+static int ltv350qv_set_power(struct lcd_device *ld, int power)
-+{
-+	struct ltv350qv *lcd;
-+
-+	lcd = class_get_devdata(&ld->class_dev);
-+	return ltv350qv_power(lcd, power);
-+}
-+
-+static int ltv350qv_get_power(struct lcd_device *ld)
-+{
-+	struct ltv350qv *lcd;
-+
-+	lcd = class_get_devdata(&ld->class_dev);
-+	return lcd->power;
-+}
-+
-+static struct lcd_ops ltv_ops = {
-+	.get_power	= ltv350qv_get_power,
-+	.set_power	= ltv350qv_set_power,
-+};
-+
-+static int __devinit ltv350qv_probe(struct spi_device *spi)
-+{
-+	struct ltv350qv *lcd;
-+	struct lcd_device *ld;
-+	int ret;
-+
-+	lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
-+	if (!lcd)
-+		return -ENOMEM;
-+
-+	lcd->spi = spi;
-+	lcd->power = FB_BLANK_POWERDOWN;
-+	lcd->buffer = kzalloc(8, GFP_KERNEL);
-+
-+	ld = lcd_device_register("ltv350qv", lcd, &ltv_ops);
-+	if (IS_ERR(ld)) {
-+		ret = PTR_ERR(ld);
-+		goto out_free_lcd;
-+	}
-+	lcd->ld = ld;
-+
-+	ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+	if (ret)
-+		goto out_unregister;
-+
-+	dev_set_drvdata(&spi->dev, lcd);
-+
-+	return 0;
-+
-+out_unregister:
-+	lcd_device_unregister(ld);
-+out_free_lcd:
-+	kfree(lcd);
-+	return ret;
-+}
-+
-+static int __devexit ltv350qv_remove(struct spi_device *spi)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+	lcd_device_unregister(lcd->ld);
-+	kfree(lcd);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int ltv350qv_suspend(struct spi_device *spi,
-+			    pm_message_t state, u32 level)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	if (level == SUSPEND_POWER_DOWN)
-+		return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+
-+	return 0;
-+}
-+
-+static int ltv350qv_resume(struct spi_device *spi, u32 level)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	if (level == RESUME_POWER_ON)
-+		return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+
-+	return 0;
-+}
-+#else
-+#define ltv350qv_suspend	NULL
-+#define ltv350qv_resume		NULL
-+#endif
-+
-+/* Power down all displays on reboot, poweroff or halt */
-+static void ltv350qv_shutdown(struct spi_device *spi)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+}
-+
-+static struct spi_driver ltv350qv_driver = {
-+	.driver = {
-+		.name		= "ltv350qv",
-+		.bus		= &spi_bus_type,
-+		.owner		= THIS_MODULE,
-+	},
-+
-+	.probe		= ltv350qv_probe,
-+	.remove		= __devexit_p(ltv350qv_remove),
-+	.shutdown	= ltv350qv_shutdown,
-+	.suspend	= ltv350qv_suspend,
-+	.resume		= ltv350qv_resume,
-+};
-+
-+static int __init ltv350qv_init(void)
-+{
-+	return spi_register_driver(&ltv350qv_driver);
-+}
-+
-+static void __exit ltv350qv_exit(void)
-+{
-+	spi_unregister_driver(&ltv350qv_driver);
-+}
-+module_init(ltv350qv_init);
-+module_exit(ltv350qv_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
-new file mode 100644
-index 0000000..189112e
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.h
-@@ -0,0 +1,95 @@
-+/*
-+ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LTV350QV_H
-+#define __LTV350QV_H
-+
-+#define LTV_OPC_INDEX	0x74
-+#define LTV_OPC_DATA	0x76
-+
-+#define LTV_ID		0x00		/* ID Read */
-+#define LTV_IFCTL	0x01		/* Display Interface Control */
-+#define LTV_DATACTL	0x02		/* Display Data Control */
-+#define LTV_ENTRY_MODE	0x03		/* Entry Mode */
-+#define LTV_GATECTL1	0x04		/* Gate Control 1 */
-+#define LTV_GATECTL2	0x05		/* Gate Control 2 */
-+#define LTV_VBP		0x06		/* Vertical Back Porch */
-+#define LTV_HBP		0x07		/* Horizontal Back Porch */
-+#define LTV_SOTCTL	0x08		/* Source Output Timing Control */
-+#define LTV_PWRCTL1	0x09		/* Power Control 1 */
-+#define LTV_PWRCTL2	0x0a		/* Power Control 2 */
-+#define LTV_GAMMA(x)	(0x10 + (x))	/* Gamma control */
-+
-+/* Bit definitions for LTV_IFCTL */
-+#define LTV_IM			(1 << 15)
-+#define LTV_NMD			(1 << 14)
-+#define LTV_SSMD		(1 << 13)
-+#define LTV_REV			(1 <<  7)
-+#define LTV_NL(x)		(((x) & 0x001f) << 0)
-+
-+/* Bit definitions for LTV_DATACTL */
-+#define LTV_DS_SAME		(0 << 12)
-+#define LTV_DS_D_TO_S		(1 << 12)
-+#define LTV_DS_S_TO_D		(2 << 12)
-+#define LTV_CHS_384		(0 <<  9)
-+#define LTV_CHS_480		(1 <<  9)
-+#define LTV_CHS_492		(2 <<  9)
-+#define LTV_DF_RGB		(0 <<  6)
-+#define LTV_DF_RGBX		(1 <<  6)
-+#define LTV_DF_XRGB		(2 <<  6)
-+#define LTV_RGB_RGB		(0 <<  2)
-+#define LTV_RGB_BGR		(1 <<  2)
-+#define LTV_RGB_GRB		(2 <<  2)
-+#define LTV_RGB_RBG		(3 <<  2)
-+
-+/* Bit definitions for LTV_ENTRY_MODE */
-+#define LTV_VSPL_ACTIVE_LOW	(0 << 15)
-+#define LTV_VSPL_ACTIVE_HIGH	(1 << 15)
-+#define LTV_HSPL_ACTIVE_LOW	(0 << 14)
-+#define LTV_HSPL_ACTIVE_HIGH	(1 << 14)
-+#define LTV_DPL_SAMPLE_RISING	(0 << 13)
-+#define LTV_DPL_SAMPLE_FALLING	(1 << 13)
-+#define LTV_EPL_ACTIVE_LOW	(0 << 12)
-+#define LTV_EPL_ACTIVE_HIGH	(1 << 12)
-+#define LTV_SS_LEFT_TO_RIGHT	(0 <<  8)
-+#define LTV_SS_RIGHT_TO_LEFT	(1 <<  8)
-+#define LTV_STB			(1 <<  1)
-+
-+/* Bit definitions for LTV_GATECTL1 */
-+#define LTV_CLW(x)		(((x) & 0x0007) << 12)
-+#define LTV_GAON		(1 <<  5)
-+#define LTV_SDR			(1 <<  3)
-+
-+/* Bit definitions for LTV_GATECTL2 */
-+#define LTV_NW_INV_FRAME	(0 << 14)
-+#define LTV_NW_INV_1LINE	(1 << 14)
-+#define LTV_NW_INV_2LINE	(2 << 14)
-+#define LTV_DSC			(1 << 12)
-+#define LTV_GIF			(1 <<  8)
-+#define LTV_FHN			(1 <<  7)
-+#define LTV_FTI(x)		(((x) & 0x0003) << 4)
-+#define LTV_FWI(x)		(((x) & 0x0003) << 0)
-+
-+/* Bit definitions for LTV_SOTCTL */
-+#define LTV_SDT(x)		(((x) & 0x0007) << 10)
-+#define LTV_EQ(x)		(((x) & 0x0007) <<  2)
-+
-+/* Bit definitions for LTV_PWRCTL1 */
-+#define LTV_VCOM_DISABLE	(1 << 14)
-+#define LTV_VCOMOUT_ENABLE	(1 << 11)
-+#define LTV_POWER_ON		(1 <<  9)
-+#define LTV_DRIVE_CURRENT(x)	(((x) & 0x0007) << 4)	/* 0=off, 5=max */
-+#define LTV_SUPPLY_CURRENT(x)	(((x) & 0x0007) << 0)	/* 0=off, 5=max */
-+
-+/* Bit definitions for LTV_PWRCTL2 */
-+#define LTV_VCOML_ENABLE	(1 << 13)
-+#define LTV_VCOML_VOLTAGE(x)	(((x) & 0x001f) << 8)	/* 0=1V, 31=-1V */
-+#define LTV_VCOMH_VOLTAGE(x)	(((x) & 0x001f) << 0)	/* 0=3V, 31=4.5V */
-+
-+#endif /* __LTV350QV_H */
-diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
-index 2822526..babf8a9 100644
---- a/drivers/video/fbmem.c
-+++ b/drivers/video/fbmem.c
-@@ -1198,6 +1198,10 @@ fb_mmap(struct file *file, struct vm_area_struct * vma)
- 	pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
- #elif defined(__arm__) || defined(__sh__) || defined(__m32r__)
- 	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-+#elif defined(__avr32__)
-+	vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot)
-+				      & ~_PAGE_CACHABLE)
-+				     | (_PAGE_BUFFER | _PAGE_DIRTY));
- #elif defined(__ia64__)
- 	if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
- 		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-diff --git a/include/asm-alpha/pgtable.h b/include/asm-alpha/pgtable.h
-index 49ac9be..616d206 100644
---- a/include/asm-alpha/pgtable.h
-+++ b/include/asm-alpha/pgtable.h
-@@ -345,10 +345,6 @@ extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
- #define io_remap_pfn_range(vma, start, pfn, size, prot)	\
- 		remap_pfn_range(vma, start, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- #define pte_ERROR(e) \
- 	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
- #define pmd_ERROR(e) \
-diff --git a/include/asm-alpha/scatterlist.h b/include/asm-alpha/scatterlist.h
-index 6afb8bd..9173654 100644
---- a/include/asm-alpha/scatterlist.h
-+++ b/include/asm-alpha/scatterlist.h
-@@ -2,6 +2,7 @@
- #define _ALPHA_SCATTERLIST_H
- 
- #include <asm/page.h>
-+#include <asm/types.h>
-   
- struct scatterlist {
- 	struct page *page;
-diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
-index d464ca5..7ef4eeb 100644
---- a/include/asm-arm/arch-at91/cpu.h
-+++ b/include/asm-arm/arch-at91/cpu.h
-@@ -68,4 +68,10 @@ static inline unsigned long at91_arch_identify(void)
- #define cpu_is_at91sam9263()	(0)
- #endif
- 
-+/*
-+ * Since this is ARM, we will never run on any AVR32 CPU. But these
-+ * definitions may reduce clutter in common drivers.
-+ */
-+#define cpu_is_at32ap7000()	(0)
-+
- #endif
-diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
-index 7b1c9ac..0c8be19 100644
---- a/include/asm-arm/pgtable-nommu.h
-+++ b/include/asm-arm/pgtable-nommu.h
-@@ -83,10 +83,6 @@ extern int is_in_rom(unsigned long);
- #define io_remap_page_range	remap_page_range
- #define io_remap_pfn_range	remap_pfn_range
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- 
- /*
-  * All 32bit addresses are effectively valid for vmalloc...
-diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
-index 7b2bafc..21dec9f 100644
---- a/include/asm-arm/pgtable.h
-+++ b/include/asm-arm/pgtable.h
-@@ -395,10 +395,6 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
- #define io_remap_pfn_range(vma,from,pfn,size,prot) \
- 		remap_pfn_range(vma, from, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- #define pgtable_cache_init() do { } while (0)
- 
- #endif /* !__ASSEMBLY__ */
-diff --git a/include/asm-arm26/pgtable.h b/include/asm-arm26/pgtable.h
-index 63a8881..2b20e9f 100644
---- a/include/asm-arm26/pgtable.h
-+++ b/include/asm-arm26/pgtable.h
-@@ -297,10 +297,6 @@ static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
- #define io_remap_pfn_range(vma,from,pfn,size,prot) \
- 		remap_pfn_range(vma, from, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- #endif /* !__ASSEMBLY__ */
- 
- #endif /* _ASMARM_PGTABLE_H */
-diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
-index 1a7b07d..2293ab0 100644
---- a/include/asm-avr32/arch-at32ap/board.h
-+++ b/include/asm-avr32/arch-at32ap/board.h
-@@ -6,6 +6,8 @@
- 
- #include <linux/types.h>
- 
-+#define GPIO_PIN_NONE	(-1)
-+
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
- 
-@@ -30,11 +32,46 @@ struct spi_board_info;
- struct platform_device *
- at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
- 
--struct lcdc_platform_data {
--	unsigned long fbmem_start;
--	unsigned long fbmem_size;
-+struct platform_device *at32_add_device_twi(unsigned int id);
-+
-+struct mci_platform_data {
-+	int detect_pin;
-+	int wp_pin;
-+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-+struct platform_device *at32_add_device_usba(unsigned int id);
-+
-+struct atmel_lcdfb_info;
-+struct platform_device *
-+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-+		     unsigned long fbmem_start, unsigned long fbmem_len);
-+
-+struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct platform_device *at32_add_device_abdac(unsigned int id);
-+
-+struct cf_platform_data {
-+	int	detect_pin;
-+	int	reset_pin;
-+	int	vcc_pin;
-+	u8	cs;
- };
- struct platform_device *
--at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data);
-+at32_add_device_cf(unsigned int id, unsigned int extint,
-+		   struct cf_platform_data *data);
-+
-+/* depending on what's hooked up, not all SSC pins will be used */
-+#define	ATMEL_SSC_TK		0x01
-+#define	ATMEL_SSC_TF		0x02
-+#define	ATMEL_SSC_TD		0x04
-+#define	ATMEL_SSC_TX		(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-+
-+#define	ATMEL_SSC_RK		0x10
-+#define	ATMEL_SSC_RF		0x20
-+#define	ATMEL_SSC_RD		0x40
-+#define	ATMEL_SSC_RX		(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-+
-+struct platform_device *
-+at32_add_device_ssc(unsigned int id, unsigned int flags);
- 
- #endif /* __ASM_ARCH_BOARD_H */
-diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
-new file mode 100644
-index 0000000..2bdc5bd
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap/cpu.h
-@@ -0,0 +1,33 @@
-+/*
-+ * AVR32 and (fake) AT91 CPU identification
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_ARCH_CPU_H
-+#define __ASM_ARCH_CPU_H
-+
-+/*
-+ * Only AT32AP7000 is defined for now. We can identify the specific
-+ * chip at runtime, but I'm not sure if it's really worth it.
-+ */
-+#ifdef CONFIG_CPU_AT32AP7000
-+# define cpu_is_at32ap7000()	(1)
-+#else
-+# define cpu_is_at32ap7000()	(0)
-+#endif
-+
-+/*
-+ * Since this is AVR32, we will never run on any AT91 CPU. But these
-+ * definitions may reduce clutter in common drivers.
-+ */
-+#define cpu_is_at91rm9200()	(0)
-+#define cpu_is_at91sam9xe()	(0)
-+#define cpu_is_at91sam9260()	(0)
-+#define cpu_is_at91sam9261()	(0)
-+#define cpu_is_at91sam9263()	(0)
-+
-+#endif /* __ASM_ARCH_CPU_H */
-diff --git a/include/asm-avr32/arch-at32ap/gpio.h b/include/asm-avr32/arch-at32ap/gpio.h
-index 80a21aa..af7f953 100644
---- a/include/asm-avr32/arch-at32ap/gpio.h
-+++ b/include/asm-avr32/arch-at32ap/gpio.h
-@@ -14,6 +14,8 @@ int gpio_direction_output(unsigned int gpio, int value);
- int gpio_get_value(unsigned int gpio);
- void gpio_set_value(unsigned int gpio, int value);
- 
-+#include <asm-generic/gpio.h>		/* cansleep wrappers */
-+
- static inline int gpio_to_irq(unsigned int gpio)
- {
- 	return gpio + GPIO_IRQ_BASE;
-diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h
-new file mode 100644
-index 0000000..ee59e40
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap/io.h
-@@ -0,0 +1,39 @@
-+#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
-+#define __ASM_AVR32_ARCH_AT32AP_IO_H
-+
-+/* For "bizarre" halfword swapping */
-+#include <linux/byteorder/swabb.h>
-+
-+#if defined(CONFIG_AP7000_32_BIT_SMC)
-+# define __swizzle_addr_b(addr)	(addr ^ 3UL)
-+# define __swizzle_addr_w(addr)	(addr ^ 2UL)
-+# define __swizzle_addr_l(addr)	(addr)
-+# define ioswabb(a, x)		(x)
-+# define ioswabw(a, x)		(x)
-+# define ioswabl(a, x)		(x)
-+# define __mem_ioswabb(a, x)	(x)
-+# define __mem_ioswabw(a, x)	swab16(x)
-+# define __mem_ioswabl(a, x)	swab32(x)
-+#elif defined(CONFIG_AP7000_16_BIT_SMC)
-+# define __swizzle_addr_b(addr)	(addr ^ 1UL)
-+# define __swizzle_addr_w(addr)	(addr)
-+# define __swizzle_addr_l(addr)	(addr)
-+# define ioswabb(a, x)		(x)
-+# define ioswabw(a, x)		(x)
-+# define ioswabl(a, x)		swahw32(x)
-+# define __mem_ioswabb(a, x)	(x)
-+# define __mem_ioswabw(a, x)	swab16(x)
-+# define __mem_ioswabl(a, x)	swahb32(x)
-+#else
-+# define __swizzle_addr_b(addr)	(addr)
-+# define __swizzle_addr_w(addr)	(addr)
-+# define __swizzle_addr_l(addr)	(addr)
-+# define ioswabb(a, x)		(x)
-+# define ioswabw(a, x)		swab16(x)
-+# define ioswabl(a, x)		swab32(x)
-+# define __mem_ioswabb(a, x)	(x)
-+# define __mem_ioswabw(a, x)	(x)
-+# define __mem_ioswabl(a, x)	(x)
-+#endif
-+
-+#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */
-diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h
-index 3732b32..07152b7 100644
---- a/include/asm-avr32/arch-at32ap/smc.h
-+++ b/include/asm-avr32/arch-at32ap/smc.h
-@@ -48,10 +48,32 @@ struct smc_config {
- 	unsigned int	nwe_controlled:1;
- 
- 	/*
-+	 * 0: NWAIT is disabled
-+	 * 1: Reserved
-+	 * 2: NWAIT is frozen mode
-+	 * 3: NWAIT in ready mode
-+	 */
-+	unsigned int	nwait_mode:2;
-+
-+	/*
- 	 * 0: Byte select access type
- 	 * 1: Byte write access type
- 	 */
- 	unsigned int	byte_write:1;
-+
-+	/*
-+	 * Number of clock cycles before data is released after
-+	 * the rising edge of the read controlling signal
-+	 *
-+	 * Total cycles from SMC is tdf_cycles + 1
-+	 */
-+	unsigned int	tdf_cycles:4;
-+
-+	/*
-+	 * 0: TDF optimization disabled
-+	 * 1: TDF optimization enabled
-+	 */
-+	unsigned int	tdf_mode:1;
- };
- 
- extern int smc_set_configuration(int cs, const struct smc_config *config);
-diff --git a/include/asm-avr32/arch-at32ap/time.h b/include/asm-avr32/arch-at32ap/time.h
-new file mode 100644
-index 0000000..cc8a434
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap/time.h
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
-+#define _ASM_AVR32_ARCH_AT32AP_TIME_H
-+
-+#include <linux/platform_device.h>
-+
-+extern struct irqaction timer_irqaction;
-+extern struct platform_device at32_systc0_device;
-+extern void local_timer_interrupt(int irq, void *dev_id);
-+
-+#define TIMER_BCR					0x000000c0
-+#define TIMER_BCR_SYNC						 0
-+#define TIMER_BMR					0x000000c4
-+#define TIMER_BMR_TC0XC0S					 0
-+#define TIMER_BMR_TC1XC1S					 2
-+#define TIMER_BMR_TC2XC2S					 4
-+#define TIMER_CCR					0x00000000
-+#define TIMER_CCR_CLKDIS					 1
-+#define TIMER_CCR_CLKEN						 0
-+#define TIMER_CCR_SWTRG						 2
-+#define TIMER_CMR					0x00000004
-+#define TIMER_CMR_ABETRG					10
-+#define TIMER_CMR_ACPA						16
-+#define TIMER_CMR_ACPC						18
-+#define TIMER_CMR_AEEVT						20
-+#define TIMER_CMR_ASWTRG					22
-+#define TIMER_CMR_BCPB						24
-+#define TIMER_CMR_BCPC						26
-+#define TIMER_CMR_BEEVT						28
-+#define TIMER_CMR_BSWTRG					30
-+#define TIMER_CMR_BURST						 4
-+#define TIMER_CMR_CLKI						 3
-+#define TIMER_CMR_CPCDIS					 7
-+#define TIMER_CMR_CPCSTOP					 6
-+#define TIMER_CMR_CPCTRG					14
-+#define TIMER_CMR_EEVT						10
-+#define TIMER_CMR_EEVTEDG					 8
-+#define TIMER_CMR_ENETRG					12
-+#define TIMER_CMR_ETRGEDG					 8
-+#define TIMER_CMR_LDBDIS					 7
-+#define TIMER_CMR_LDBSTOP					 6
-+#define TIMER_CMR_LDRA						16
-+#define TIMER_CMR_LDRB						18
-+#define TIMER_CMR_TCCLKS					 0
-+#define TIMER_CMR_WAVE						15
-+#define TIMER_CMR_WAVSEL					13
-+#define TIMER_CV					0x00000010
-+#define TIMER_CV_CV						 0
-+#define TIMER_IDR					0x00000028
-+#define TIMER_IDR_COVFS						 0
-+#define TIMER_IDR_CPAS						 2
-+#define TIMER_IDR_CPBS						 3
-+#define TIMER_IDR_CPCS						 4
-+#define TIMER_IDR_ETRGS						 7
-+#define TIMER_IDR_LDRAS						 5
-+#define TIMER_IDR_LDRBS						 6
-+#define TIMER_IDR_LOVRS						 1
-+#define TIMER_IER					0x00000024
-+#define TIMER_IER_COVFS						 0
-+#define TIMER_IER_CPAS						 2
-+#define TIMER_IER_CPBS						 3
-+#define TIMER_IER_CPCS						 4
-+#define TIMER_IER_ETRGS						 7
-+#define TIMER_IER_LDRAS						 5
-+#define TIMER_IER_LDRBS						 6
-+#define TIMER_IER_LOVRS						 1
-+#define TIMER_IMR					0x0000002c
-+#define TIMER_IMR_COVFS						 0
-+#define TIMER_IMR_CPAS						 2
-+#define TIMER_IMR_CPBS						 3
-+#define TIMER_IMR_CPCS						 4
-+#define TIMER_IMR_ETRGS						 7
-+#define TIMER_IMR_LDRAS						 5
-+#define TIMER_IMR_LDRBS						 6
-+#define TIMER_IMR_LOVRS						 1
-+#define TIMER_RA					0x00000014
-+#define TIMER_RA_RA						 0
-+#define TIMER_RB					0x00000018
-+#define TIMER_RB_RB						 0
-+#define TIMER_RC					0x0000001c
-+#define TIMER_RC_RC						 0
-+#define TIMER_SR					0x00000020
-+#define TIMER_SR_CLKSTA						16
-+#define TIMER_SR_COVFS						 0
-+#define TIMER_SR_CPAS						 2
-+#define TIMER_SR_CPBS						 3
-+#define TIMER_SR_CPCS						 4
-+#define TIMER_SR_ETRGS						 7
-+#define TIMER_SR_LDRAS						 5
-+#define TIMER_SR_LDRBS						 6
-+#define TIMER_SR_LOVRS						 1
-+#define TIMER_SR_MTIOA						17
-+#define TIMER_SR_MTIOB						18
-+
-+/* Bit manipulation macros */
-+#define TIMER_BIT(name)		(1 << TIMER_##name)
-+#define TIMER_BF(name,value)	((value) << TIMER_##name)
-+
-+/* Register access macros */
-+#define timer_read(port,instance,reg) \
-+	__raw_readl(port + (0x40 * instance) + TIMER_##reg)
-+#define timer_write(port,instance,reg,value) \
-+	__raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
-+
-+#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */
-diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h
-index c40b603..b9c2548 100644
---- a/include/asm-avr32/atomic.h
-+++ b/include/asm-avr32/atomic.h
-@@ -173,7 +173,7 @@ static inline int atomic_sub_if_positive(int i, atomic_t *v)
- }
- 
- #define atomic_xchg(v, new)	(xchg(&((v)->counter), new))
--#define atomic_cmpxchg(v, o, n)	((int)cmpxchg(&((v)->counter), (o), (n)))
-+#define atomic_cmpxchg(v, o, n)	(cmpxchg(&((v)->counter), (o), (n)))
- 
- #define atomic_sub(i, v)	(void)atomic_sub_return(i, v)
- #define atomic_add(i, v)	(void)atomic_add_return(i, v)
-diff --git a/include/asm-avr32/bug.h b/include/asm-avr32/bug.h
-index 521766b..afdcd79 100644
---- a/include/asm-avr32/bug.h
-+++ b/include/asm-avr32/bug.h
-@@ -18,27 +18,53 @@
- 
- #ifdef CONFIG_DEBUG_BUGVERBOSE
- 
--#define BUG()								\
--	do {								\
--		asm volatile(".hword	%0\n\t"				\
--			     ".hword	%1\n\t"				\
--			     ".long	%2"				\
--			     :						\
--			     : "n"(AVR32_BUG_OPCODE),			\
--			       "i"(__LINE__), "X"(__FILE__));		\
--	} while (0)
-+#define _BUG_OR_WARN(flags)						\
-+	asm volatile(							\
-+		"1:	.hword	%0\n"					\
-+		"	.section __bug_table,\"a\",@progbits\n"		\
-+		"2:	.long	1b\n"					\
-+		"	.long	%1\n"					\
-+		"	.short	%2\n"					\
-+		"	.short	%3\n"					\
-+		"	.org	2b + %4\n"				\
-+		"	.previous"					\
-+		:							\
-+		: "i"(AVR32_BUG_OPCODE), "i"(__FILE__),			\
-+		  "i"(__LINE__), "i"(flags),				\
-+		  "i"(sizeof(struct bug_entry)))
- 
- #else
- 
-+#define _BUG_OR_WARN(flags)						\
-+	asm volatile(							\
-+		"1:	.hword	%0\n"					\
-+		"	.section __bug_table,\"a\",@progbits\n"		\
-+		"2:	.long	1b\n"					\
-+		"	.short	%1\n"					\
-+		"	.org	2b + %2\n"				\
-+		"	.previous"					\
-+		:							\
-+		: "i"(AVR32_BUG_OPCODE), "i"(flags),			\
-+		  "i"(sizeof(struct bug_entry)))
-+
-+#endif /* CONFIG_DEBUG_BUGVERBOSE */
-+
- #define BUG()								\
- 	do {								\
--		asm volatile(".hword	%0\n\t"				\
--			     : : "n"(AVR32_BUG_OPCODE));		\
-+		_BUG_OR_WARN(0);					\
-+		for (;;);						\
- 	} while (0)
- 
--#endif /* CONFIG_DEBUG_BUGVERBOSE */
-+#define WARN_ON(condition)							\
-+	({								\
-+		typeof(condition) __ret_warn_on = (condition);		\
-+		if (unlikely(__ret_warn_on))				\
-+			_BUG_OR_WARN(BUGFLAG_WARNING);			\
-+		unlikely(__ret_warn_on);				\
-+	})
- 
- #define HAVE_ARCH_BUG
-+#define HAVE_ARCH_WARN_ON
- 
- #endif /* CONFIG_BUG */
- 
-diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
-new file mode 100644
-index 0000000..56a4965
---- /dev/null
-+++ b/include/asm-avr32/dma-controller.h
-@@ -0,0 +1,166 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
-+
-+#include <linux/device.h>
-+
-+#define DMA_DIR_MEM_TO_MEM		0x0000
-+#define DMA_DIR_MEM_TO_PERIPH		0x0001
-+#define DMA_DIR_PERIPH_TO_MEM		0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH	0x0003
-+
-+#define DMA_WIDTH_8BIT			0
-+#define DMA_WIDTH_16BIT			1
-+#define DMA_WIDTH_32BIT			2
-+
-+struct dma_request {
-+	struct dma_controller *dmac;
-+	struct list_head list;
-+
-+	unsigned short channel;
-+
-+	void (*xfer_complete)(struct dma_request *req);
-+	void (*block_complete)(struct dma_request *req);
-+	void (*error)(struct dma_request *req);
-+};
-+
-+struct dma_request_sg {
-+	struct dma_request req;
-+
-+	int nr_sg;
-+	struct scatterlist *sg;
-+	unsigned long block_size;
-+	unsigned int nr_blocks;
-+
-+	dma_addr_t data_reg;
-+	unsigned short periph_id;
-+
-+	unsigned char direction;
-+	unsigned char width;
-+};
-+#define to_dma_request_sg(_req)				\
-+	container_of(_req, struct dma_request_sg, req)
-+
-+struct dma_request_cyclic {
-+	struct dma_request req;
-+
-+        int periods;
-+	unsigned long buffer_size;
-+
-+        dma_addr_t buffer_start;
-+	dma_addr_t data_reg;
-+
-+	unsigned short periph_id;
-+	unsigned char direction;
-+	unsigned char width;
-+
-+        void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req)				\
-+	container_of(_req, struct dma_request_cyclic, req)
-+
-+struct dma_request_memcpy {
-+	struct dma_request req;
-+
-+	dma_addr_t src_addr;
-+	unsigned int src_width;
-+	unsigned int src_stride;
-+
-+	dma_addr_t dst_addr;
-+	unsigned int dst_width;
-+	unsigned int dst_stride;
-+
-+	size_t length;
-+
-+	unsigned short src_reverse:1;
-+	unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req)				\
-+	container_of(_req, struct dma_request_memcpy, req)
-+
-+struct dma_controller {
-+	struct list_head list;
-+	int id;
-+	struct device *dev;
-+
-+	int (*alloc_channel)(struct dma_controller *dmac);
-+	void (*release_channel)(struct dma_controller *dmac,
-+				int channel);
-+	int (*prepare_request_sg)(struct dma_controller *dmac,
-+				  struct dma_request_sg *req);
-+        int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+				      struct dma_request_cyclic *req);
-+	int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+				      struct dma_request_memcpy *req);
-+	int (*start_request)(struct dma_controller *dmac,
-+			     unsigned int channel);
-+	int (*stop_request)(struct dma_controller *dmac,
-+                            unsigned int channel);
-+        dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+                                      unsigned int channel);
-+};
-+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+	return dmac->alloc_channel(dmac);
-+}
-+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
-+{
-+	dmac->release_channel(dmac, chan);
-+}
-+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+		       struct dma_request_sg *req)
-+{
-+	return dmac->prepare_request_sg(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+			   struct dma_request_cyclic *req)
-+{
-+	return dmac->prepare_request_cyclic(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+			   struct dma_request_memcpy *req)
-+{
-+	return dmac->prepare_request_memcpy(dmac, req);
-+}
-+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+		  unsigned int channel)
-+{
-+	return dmac->start_request(dmac, channel);
-+}
-+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+                 unsigned int channel)
-+{
-+	return dmac->stop_request(dmac, channel);
-+}
-+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+                    unsigned int channel)
-+{
-+	return dmac->get_current_pos(dmac, channel);
-+}
-+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
-+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
-index c08e810..e30d4b3 100644
---- a/include/asm-avr32/io.h
-+++ b/include/asm-avr32/io.h
-@@ -1,13 +1,15 @@
- #ifndef __ASM_AVR32_IO_H
- #define __ASM_AVR32_IO_H
- 
-+#include <linux/kernel.h>
- #include <linux/string.h>
--
--#ifdef __KERNEL__
-+#include <linux/types.h>
- 
- #include <asm/addrspace.h>
- #include <asm/byteorder.h>
- 
-+#include <asm/arch/io.h>
-+
- /* virt_to_phys will only work when address is in P1 or P2 */
- static __inline__ unsigned long virt_to_phys(volatile void *address)
- {
-@@ -36,104 +38,215 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
- extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
- extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
- 
--static inline void writeb(unsigned char b, volatile void __iomem *addr)
-+static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
- {
--	*(volatile unsigned char __force *)addr = b;
-+	*(volatile u8 __force *)addr = v;
- }
--static inline void writew(unsigned short b, volatile void __iomem *addr)
-+static inline void __raw_writew(u16 v, volatile void __iomem *addr)
- {
--	*(volatile unsigned short __force *)addr = b;
-+	*(volatile u16 __force *)addr = v;
- }
--static inline void writel(unsigned int b, volatile void __iomem *addr)
-+static inline void __raw_writel(u32 v, volatile void __iomem *addr)
- {
--	*(volatile unsigned int __force *)addr = b;
-+	*(volatile u32 __force *)addr = v;
- }
--#define __raw_writeb writeb
--#define __raw_writew writew
--#define __raw_writel writel
- 
--static inline unsigned char readb(const volatile void __iomem *addr)
-+static inline u8 __raw_readb(const volatile void __iomem *addr)
- {
--	return *(const volatile unsigned char __force *)addr;
-+	return *(const volatile u8 __force *)addr;
- }
--static inline unsigned short readw(const volatile void __iomem *addr)
-+static inline u16 __raw_readw(const volatile void __iomem *addr)
- {
--	return *(const volatile unsigned short __force *)addr;
-+	return *(const volatile u16 __force *)addr;
- }
--static inline unsigned int readl(const volatile void __iomem *addr)
-+static inline u32 __raw_readl(const volatile void __iomem *addr)
- {
--	return *(const volatile unsigned int __force *)addr;
-+	return *(const volatile u32 __force *)addr;
-+}
-+
-+/* Convert I/O port address to virtual address */
-+#ifndef __io
-+# define __io(p)	((void *)phys_to_uncached(p))
-+#endif
-+
-+/*
-+ * Not really sure about the best way to slow down I/O on
-+ * AVR32. Defining it as a no-op until we have an actual test case.
-+ */
-+#define SLOW_DOWN_IO	do { } while (0)
-+
-+#define __BUILD_MEMORY_SINGLE(pfx, bwl, type)				\
-+static inline void							\
-+pfx##write##bwl(type val, volatile void __iomem *addr)			\
-+{									\
-+	volatile type *__addr;						\
-+	type __val;							\
-+									\
-+	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
-+	__val = pfx##ioswab##bwl(__addr, val);				\
-+									\
-+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-+									\
-+	*__addr = __val;						\
-+}									\
-+									\
-+static inline type pfx##read##bwl(const volatile void __iomem *addr)	\
-+{									\
-+	volatile type *__addr;						\
-+	type __val;							\
-+									\
-+	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
-+									\
-+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-+									\
-+	__val = *__addr;						\
-+	return pfx##ioswab##bwl(__addr, __val);				\
-+}
-+
-+#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow)			\
-+static inline void pfx##out##bwl##p(type val, unsigned long port)	\
-+{									\
-+	volatile type *__addr;						\
-+	type __val;							\
-+									\
-+	__addr = __io(__swizzle_addr_##bwl(port));			\
-+	__val = pfx##ioswab##bwl(__addr, val);				\
-+									\
-+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-+									\
-+	*__addr = __val;						\
-+	slow;								\
-+}									\
-+									\
-+static inline type pfx##in##bwl##p(unsigned long port)			\
-+{									\
-+	volatile type *__addr;						\
-+	type __val;							\
-+									\
-+	__addr = __io(__swizzle_addr_##bwl(port));			\
-+									\
-+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-+									\
-+	__val = *__addr;						\
-+	slow;								\
-+									\
-+	return pfx##ioswab##bwl(__addr, __val);				\
-+}
-+
-+#define __BUILD_MEMORY_PFX(bus, bwl, type)				\
-+	__BUILD_MEMORY_SINGLE(bus, bwl, type)
-+
-+#define BUILDIO_MEM(bwl, type)						\
-+	__BUILD_MEMORY_PFX(, bwl, type)					\
-+	__BUILD_MEMORY_PFX(__mem_, bwl, type)
-+
-+#define __BUILD_IOPORT_PFX(bus, bwl, type)				\
-+	__BUILD_IOPORT_SINGLE(bus, bwl, type, ,)			\
-+	__BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
-+
-+#define BUILDIO_IOPORT(bwl, type)					\
-+	__BUILD_IOPORT_PFX(, bwl, type)					\
-+	__BUILD_IOPORT_PFX(__mem_, bwl, type)
-+
-+BUILDIO_MEM(b, u8)
-+BUILDIO_MEM(w, u16)
-+BUILDIO_MEM(l, u32)
-+
-+BUILDIO_IOPORT(b, u8)
-+BUILDIO_IOPORT(w, u16)
-+BUILDIO_IOPORT(l, u32)
-+
-+#define readb_relaxed			readb
-+#define readw_relaxed			readw
-+#define readl_relaxed			readl
-+
-+#define __BUILD_MEMORY_STRING(bwl, type)				\
-+static inline void writes##bwl(volatile void __iomem *addr,		\
-+			       const void *data, unsigned int count)	\
-+{									\
-+	const type *__data = data;					\
-+									\
-+	while (count--)							\
-+		__mem_write##bwl(*__data++, addr);			\
-+}									\
-+									\
-+static inline void reads##bwl(const volatile void __iomem *addr,	\
-+			      void *data, unsigned int count)		\
-+{									\
-+	type *__data = data;						\
-+									\
-+	while (count--)							\
-+		*__data++ = __mem_read##bwl(addr);			\
- }
--#define __raw_readb readb
--#define __raw_readw readw
--#define __raw_readl readl
- 
--#define writesb(p, d, l)	__raw_writesb((unsigned int)p, d, l)
--#define writesw(p, d, l)	__raw_writesw((unsigned int)p, d, l)
--#define writesl(p, d, l)	__raw_writesl((unsigned int)p, d, l)
-+#define __BUILD_IOPORT_STRING(bwl, type)				\
-+static inline void outs##bwl(unsigned long port, const void *data,	\
-+			     unsigned int count)			\
-+{									\
-+	const type *__data = data;					\
-+									\
-+	while (count--)							\
-+		__mem_out##bwl(*__data++, port);			\
-+}									\
-+									\
-+static inline void ins##bwl(unsigned long port, void *data,		\
-+			   unsigned int count)				\
-+{									\
-+	type *__data = data;						\
-+									\
-+	while (count--)							\
-+		*__data++ = __mem_in##bwl(port);			\
-+}
- 
--#define readsb(p, d, l)		__raw_readsb((unsigned int)p, d, l)
--#define readsw(p, d, l)		__raw_readsw((unsigned int)p, d, l)
--#define readsl(p, d, l)		__raw_readsl((unsigned int)p, d, l)
-+#define BUILDSTRING(bwl, type)						\
-+	__BUILD_MEMORY_STRING(bwl, type)				\
-+	__BUILD_IOPORT_STRING(bwl, type)
- 
-+BUILDSTRING(b, u8)
-+BUILDSTRING(w, u16)
-+BUILDSTRING(l, u32)
- 
- /*
-  * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
-  */
- #ifndef ioread8
- 
--#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
-+#define ioread8(p)		((unsigned int)readb(p))
- 
--#define ioread16(p)	({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; })
--#define ioread16be(p)	({ unsigned int __v = be16_to_cpu(__raw_readw(p)); __v; })
-+#define ioread16(p)		((unsigned int)readw(p))
-+#define ioread16be(p)		((unsigned int)__raw_readw(p))
- 
--#define ioread32(p)	({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; })
--#define ioread32be(p)	({ unsigned int __v = be32_to_cpu(__raw_readl(p)); __v; })
-+#define ioread32(p)		((unsigned int)readl(p))
-+#define ioread32be(p)		((unsigned int)__raw_readl(p))
- 
--#define iowrite8(v,p)	__raw_writeb(v, p)
-+#define iowrite8(v,p)		writeb(v, p)
- 
--#define iowrite16(v,p)	__raw_writew(cpu_to_le16(v), p)
--#define iowrite16be(v,p)	__raw_writew(cpu_to_be16(v), p)
-+#define iowrite16(v,p)		writew(v, p)
-+#define iowrite16be(v,p)	__raw_writew(v, p)
- 
--#define iowrite32(v,p)	__raw_writel(cpu_to_le32(v), p)
--#define iowrite32be(v,p)	__raw_writel(cpu_to_be32(v), p)
-+#define iowrite32(v,p)		writel(v, p)
-+#define iowrite32be(v,p)	__raw_writel(v, p)
- 
--#define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
--#define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
--#define ioread32_rep(p,d,c)	__raw_readsl(p,d,c)
-+#define ioread8_rep(p,d,c)	readsb(p,d,c)
-+#define ioread16_rep(p,d,c)	readsw(p,d,c)
-+#define ioread32_rep(p,d,c)	readsl(p,d,c)
- 
--#define iowrite8_rep(p,s,c)	__raw_writesb(p,s,c)
--#define iowrite16_rep(p,s,c)	__raw_writesw(p,s,c)
--#define iowrite32_rep(p,s,c)	__raw_writesl(p,s,c)
-+#define iowrite8_rep(p,s,c)	writesb(p,s,c)
-+#define iowrite16_rep(p,s,c)	writesw(p,s,c)
-+#define iowrite32_rep(p,s,c)	writesl(p,s,c)
- 
- #endif
- 
--
--/*
-- * These two are only here because ALSA _thinks_ it needs them...
-- */
- static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
- 				 unsigned long count)
- {
--	char *p = to;
--	while (count) {
--		count--;
--		*p = readb(from);
--		p++;
--		from++;
--	}
-+	memcpy(to, (const void __force *)from, count);
- }
- 
- static inline void  memcpy_toio(volatile void __iomem *to, const void * from,
- 				unsigned long count)
- {
--	const char *p = from;
--	while (count) {
--		count--;
--		writeb(*p, to);
--		p++;
--		to++;
--	}
-+	memcpy((void __force *)to, from, count);
- }
- 
- static inline void memset_io(volatile void __iomem *addr, unsigned char val,
-@@ -142,99 +255,8 @@ static inline void memset_io(volatile void __iomem *addr, unsigned char val,
- 	memset((void __force *)addr, val, count);
- }
- 
--/*
-- * Bad read/write accesses...
-- */
--extern void __readwrite_bug(const char *fn);
--
- #define IO_SPACE_LIMIT	0xffffffff
- 
--/* Convert I/O port address to virtual address */
--#define __io(p)		((void __iomem *)phys_to_uncached(p))
--
--/*
-- *  IO port access primitives
-- *  -------------------------
-- *
-- * The AVR32 doesn't have special IO access instructions; all IO is memory
-- * mapped. Note that these are defined to perform little endian accesses
-- * only. Their primary purpose is to access PCI and ISA peripherals.
-- *
-- * Note that for a big endian machine, this implies that the following
-- * big endian mode connectivity is in place.
-- *
-- * The machine specific io.h include defines __io to translate an "IO"
-- * address to a memory address.
-- *
-- * Note that we prevent GCC re-ordering or caching values in expressions
-- * by introducing sequence points into the in*() definitions.  Note that
-- * __raw_* do not guarantee this behaviour.
-- *
-- * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
-- */
--#define outb(v, p)		__raw_writeb(v, __io(p))
--#define outw(v, p)		__raw_writew(cpu_to_le16(v), __io(p))
--#define outl(v, p)		__raw_writel(cpu_to_le32(v), __io(p))
--
--#define inb(p)			__raw_readb(__io(p))
--#define inw(p)			le16_to_cpu(__raw_readw(__io(p)))
--#define inl(p)			le32_to_cpu(__raw_readl(__io(p)))
--
--static inline void __outsb(unsigned long port, void *addr, unsigned int count)
--{
--	while (count--) {
--		outb(*(u8 *)addr, port);
--		addr++;
--	}
--}
--
--static inline void __insb(unsigned long port, void *addr, unsigned int count)
--{
--	while (count--) {
--		*(u8 *)addr = inb(port);
--		addr++;
--	}
--}
--
--static inline void __outsw(unsigned long port, void *addr, unsigned int count)
--{
--	while (count--) {
--		outw(*(u16 *)addr, port);
--		addr += 2;
--	}
--}
--
--static inline void __insw(unsigned long port, void *addr, unsigned int count)
--{
--	while (count--) {
--		*(u16 *)addr = inw(port);
--		addr += 2;
--	}
--}
--
--static inline void __outsl(unsigned long port, void *addr, unsigned int count)
--{
--	while (count--) {
--		outl(*(u32 *)addr, port);
--		addr += 4;
--	}
--}
--
--static inline void __insl(unsigned long port, void *addr, unsigned int count)
--{
--	while (count--) {
--		*(u32 *)addr = inl(port);
--		addr += 4;
--	}
--}
--
--#define outsb(port, addr, count)	__outsb(port, addr, count)
--#define insb(port, addr, count)		__insb(port, addr, count)
--#define outsw(port, addr, count)	__outsw(port, addr, count)
--#define insw(port, addr, count)		__insw(port, addr, count)
--#define outsl(port, addr, count)	__outsl(port, addr, count)
--#define insl(port, addr, count)		__insl(port, addr, count)
--
- extern void __iomem *__ioremap(unsigned long offset, size_t size,
- 			       unsigned long flags);
- extern void __iounmap(void __iomem *addr);
-@@ -292,6 +314,4 @@ extern void __iounmap(void __iomem *addr);
-  */
- #define xlate_dev_kmem_ptr(p)   p
- 
--#endif /* __KERNEL__ */
--
- #endif /* __ASM_AVR32_IO_H */
-diff --git a/include/asm-avr32/kdebug.h b/include/asm-avr32/kdebug.h
-index f583b64..a8c2f5e 100644
---- a/include/asm-avr32/kdebug.h
-+++ b/include/asm-avr32/kdebug.h
-@@ -12,16 +12,12 @@ struct die_args {
- 
- int register_die_notifier(struct notifier_block *nb);
- int unregister_die_notifier(struct notifier_block *nb);
--int register_page_fault_notifier(struct notifier_block *nb);
--int unregister_page_fault_notifier(struct notifier_block *nb);
- extern struct atomic_notifier_head avr32_die_chain;
- 
- /* Grossly misnamed. */
- enum die_val {
--	DIE_FAULT,
- 	DIE_BREAKPOINT,
- 	DIE_SSTEP,
--	DIE_PAGE_FAULT,
- };
- 
- static inline int notify_die(enum die_val val, struct pt_regs *regs,
-@@ -35,4 +31,18 @@ static inline int notify_die(enum die_val val, struct pt_regs *regs,
- 	return atomic_notifier_call_chain(&avr32_die_chain, val, &args);
- }
- 
-+/*
-+ * These are only here because kprobes.c wants them to implement a
-+ * blatant layering violation.  Will hopefully go away soon once all
-+ * architectures are updated.
-+ */
-+static inline int register_page_fault_notifier(struct notifier_block *nb)
-+{
-+	return 0;
-+}
-+static inline int unregister_page_fault_notifier(struct notifier_block *nb)
-+{
-+	return 0;
-+}
-+
- #endif /* __ASM_AVR32_KDEBUG_H */
-diff --git a/include/asm-avr32/kprobes.h b/include/asm-avr32/kprobes.h
-index 09a5cbe..190a637 100644
---- a/include/asm-avr32/kprobes.h
-+++ b/include/asm-avr32/kprobes.h
-@@ -26,6 +26,7 @@ struct arch_specific_insn {
- 	kprobe_opcode_t	insn[MAX_INSN_SIZE];
- };
- 
-+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
- extern int kprobe_exceptions_notify(struct notifier_block *self,
- 				    unsigned long val, void *data);
- 
-diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h
-index 6b8ca9d..f6cc2b0 100644
---- a/include/asm-avr32/pgtable.h
-+++ b/include/asm-avr32/pgtable.h
-@@ -394,10 +394,6 @@ typedef pte_t *pte_addr_t;
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
- 	remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- /* No page table caches to initialize (?) */
- #define pgtable_cache_init()	do { } while(0)
- 
-diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h
-index f691377..6a64833 100644
---- a/include/asm-avr32/processor.h
-+++ b/include/asm-avr32/processor.h
-@@ -40,6 +40,14 @@ enum tlb_config {
- 	TLB_INVALID
- };
- 
-+#define AVR32_FEATURE_RMW	(1 << 0)
-+#define AVR32_FEATURE_DSP	(1 << 1)
-+#define AVR32_FEATURE_SIMD	(1 << 2)
-+#define AVR32_FEATURE_OCD	(1 << 3)
-+#define AVR32_FEATURE_PCTR	(1 << 4)
-+#define AVR32_FEATURE_JAVA	(1 << 5)
-+#define AVR32_FEATURE_FPU	(1 << 6)
-+
- struct avr32_cpuinfo {
- 	struct clk *clk;
- 	unsigned long loops_per_jiffy;
-@@ -48,6 +56,7 @@ struct avr32_cpuinfo {
- 	unsigned short arch_revision;
- 	unsigned short cpu_revision;
- 	enum tlb_config tlb_config;
-+	unsigned long features;
- 
- 	struct cache_info icache;
- 	struct cache_info dcache;
-@@ -125,10 +134,10 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
- #define thread_saved_pc(tsk)    ((tsk)->thread.cpu_context.pc)
- 
- struct pt_regs;
--void show_trace(struct task_struct *task, unsigned long *stack,
--		struct pt_regs *regs);
--
- extern unsigned long get_wchan(struct task_struct *p);
-+extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl);
-+extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
-+			       struct pt_regs *regs, const char *log_lvl);
- 
- #define KSTK_EIP(tsk)	((tsk)->thread.cpu_context.pc)
- #define KSTK_ESP(tsk)	((tsk)->thread.cpu_context.ksp)
-diff --git a/include/asm-avr32/scatterlist.h b/include/asm-avr32/scatterlist.h
-index bfe7d75..c6d5ce3 100644
---- a/include/asm-avr32/scatterlist.h
-+++ b/include/asm-avr32/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef __ASM_AVR32_SCATTERLIST_H
- #define __ASM_AVR32_SCATTERLIST_H
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
-     struct page		*page;
-     unsigned int	offset;
-diff --git a/include/asm-avr32/setup.h b/include/asm-avr32/setup.h
-index 0a52242..b0828d4 100644
---- a/include/asm-avr32/setup.h
-+++ b/include/asm-avr32/setup.h
-@@ -110,7 +110,7 @@ struct tagtable {
- 	int	(*parse)(struct tag *);
- };
- 
--#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
-+#define __tag __attribute_used__ __attribute__((__section__(".taglist.init")))
- #define __tagtable(tag, fn)						\
- 	static struct tagtable __tagtable_##fn __tag = { tag, fn }
- 
-@@ -124,19 +124,12 @@ struct tagtable {
- #define for_each_tag(t,base)						\
- 	for (t = base; t->hdr.size; t = tag_next(t))
- 
--extern struct tag_mem_range *mem_phys;
--extern struct tag_mem_range *mem_reserved;
--extern struct tag_mem_range *mem_ramdisk;
--
- extern struct tag *bootloader_tags;
- 
--extern void setup_bootmem(void);
--extern void setup_processor(void);
--extern void board_setup_fbmem(unsigned long fbmem_start,
--			      unsigned long fbmem_size);
-+extern resource_size_t fbmem_start;
-+extern resource_size_t fbmem_size;
- 
--/* Chip-specific hook to enable the use of SDRAM */
--void chip_enable_sdram(void);
-+void setup_processor(void);
- 
- #endif /* !__ASSEMBLY__ */
- 
-diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h
-index f91975f..c02bc83 100644
---- a/include/asm-avr32/sysreg.h
-+++ b/include/asm-avr32/sysreg.h
-@@ -7,326 +7,281 @@
-  * it under the terms of the GNU General Public License version 2 as
-  * published by the Free Software Foundation.
-  */
--#ifndef __ASM_AVR32_SYSREG_H__
--#define __ASM_AVR32_SYSREG_H__
-+#ifndef __ASM_AVR32_SYSREG_H
-+#define __ASM_AVR32_SYSREG_H
- 
- /* sysreg register offsets */
--#define SYSREG_SR                               0x0000
--#define SYSREG_EVBA                             0x0004
--#define SYSREG_ACBA                             0x0008
--#define SYSREG_CPUCR                            0x000c
--#define SYSREG_ECR                              0x0010
--#define SYSREG_RSR_SUP                          0x0014
--#define SYSREG_RSR_INT0                         0x0018
--#define SYSREG_RSR_INT1                         0x001c
--#define SYSREG_RSR_INT2                         0x0020
--#define SYSREG_RSR_INT3                         0x0024
--#define SYSREG_RSR_EX                           0x0028
--#define SYSREG_RSR_NMI                          0x002c
--#define SYSREG_RSR_DBG                          0x0030
--#define SYSREG_RAR_SUP                          0x0034
--#define SYSREG_RAR_INT0                         0x0038
--#define SYSREG_RAR_INT1                         0x003c
--#define SYSREG_RAR_INT2                         0x0040
--#define SYSREG_RAR_INT3                         0x0044
--#define SYSREG_RAR_EX                           0x0048
--#define SYSREG_RAR_NMI                          0x004c
--#define SYSREG_RAR_DBG                          0x0050
--#define SYSREG_JECR                             0x0054
--#define SYSREG_JOSP                             0x0058
--#define SYSREG_JAVA_LV0                         0x005c
--#define SYSREG_JAVA_LV1                         0x0060
--#define SYSREG_JAVA_LV2                         0x0064
--#define SYSREG_JAVA_LV3                         0x0068
--#define SYSREG_JAVA_LV4                         0x006c
--#define SYSREG_JAVA_LV5                         0x0070
--#define SYSREG_JAVA_LV6                         0x0074
--#define SYSREG_JAVA_LV7                         0x0078
--#define SYSREG_JTBA                             0x007c
--#define SYSREG_JBCR                             0x0080
--#define SYSREG_CONFIG0                          0x0100
--#define SYSREG_CONFIG1                          0x0104
--#define SYSREG_COUNT                            0x0108
--#define SYSREG_COMPARE                          0x010c
--#define SYSREG_TLBEHI                           0x0110
--#define SYSREG_TLBELO                           0x0114
--#define SYSREG_PTBR                             0x0118
--#define SYSREG_TLBEAR                           0x011c
--#define SYSREG_MMUCR                            0x0120
--#define SYSREG_TLBARLO                          0x0124
--#define SYSREG_TLBARHI                          0x0128
--#define SYSREG_PCCNT                            0x012c
--#define SYSREG_PCNT0                            0x0130
--#define SYSREG_PCNT1                            0x0134
--#define SYSREG_PCCR                             0x0138
--#define SYSREG_BEAR                             0x013c
-+#define SYSREG_SR				0x0000
-+#define SYSREG_EVBA				0x0004
-+#define SYSREG_ACBA				0x0008
-+#define SYSREG_CPUCR				0x000c
-+#define SYSREG_ECR				0x0010
-+#define SYSREG_RSR_SUP				0x0014
-+#define SYSREG_RSR_INT0				0x0018
-+#define SYSREG_RSR_INT1				0x001c
-+#define SYSREG_RSR_INT2				0x0020
-+#define SYSREG_RSR_INT3				0x0024
-+#define SYSREG_RSR_EX				0x0028
-+#define SYSREG_RSR_NMI				0x002c
-+#define SYSREG_RSR_DBG				0x0030
-+#define SYSREG_RAR_SUP				0x0034
-+#define SYSREG_RAR_INT0				0x0038
-+#define SYSREG_RAR_INT1				0x003c
-+#define SYSREG_RAR_INT2				0x0040
-+#define SYSREG_RAR_INT3				0x0044
-+#define SYSREG_RAR_EX				0x0048
-+#define SYSREG_RAR_NMI				0x004c
-+#define SYSREG_RAR_DBG				0x0050
-+#define SYSREG_JECR				0x0054
-+#define SYSREG_JOSP				0x0058
-+#define SYSREG_JAVA_LV0				0x005c
-+#define SYSREG_JAVA_LV1				0x0060
-+#define SYSREG_JAVA_LV2				0x0064
-+#define SYSREG_JAVA_LV3				0x0068
-+#define SYSREG_JAVA_LV4				0x006c
-+#define SYSREG_JAVA_LV5				0x0070
-+#define SYSREG_JAVA_LV6				0x0074
-+#define SYSREG_JAVA_LV7				0x0078
-+#define SYSREG_JTBA				0x007c
-+#define SYSREG_JBCR				0x0080
-+#define SYSREG_CONFIG0				0x0100
-+#define SYSREG_CONFIG1				0x0104
-+#define SYSREG_COUNT				0x0108
-+#define SYSREG_COMPARE				0x010c
-+#define SYSREG_TLBEHI				0x0110
-+#define SYSREG_TLBELO				0x0114
-+#define SYSREG_PTBR				0x0118
-+#define SYSREG_TLBEAR				0x011c
-+#define SYSREG_MMUCR				0x0120
-+#define SYSREG_TLBARLO				0x0124
-+#define SYSREG_TLBARHI				0x0128
-+#define SYSREG_PCCNT				0x012c
-+#define SYSREG_PCNT0				0x0130
-+#define SYSREG_PCNT1				0x0134
-+#define SYSREG_PCCR				0x0138
-+#define SYSREG_BEAR				0x013c
-+#define SYSREG_SABAL				0x0300
-+#define SYSREG_SABAH				0x0304
-+#define SYSREG_SABD				0x0308
- 
- /* Bitfields in SR */
--#define SYSREG_SR_C_OFFSET                      0
--#define SYSREG_SR_C_SIZE                        1
--#define SYSREG_Z_OFFSET                         1
--#define SYSREG_Z_SIZE                           1
--#define SYSREG_SR_N_OFFSET                      2
--#define SYSREG_SR_N_SIZE                        1
--#define SYSREG_SR_V_OFFSET                      3
--#define SYSREG_SR_V_SIZE                        1
--#define SYSREG_Q_OFFSET                         4
--#define SYSREG_Q_SIZE                           1
--#define SYSREG_GM_OFFSET                        16
--#define SYSREG_GM_SIZE                          1
--#define SYSREG_I0M_OFFSET                       17
--#define SYSREG_I0M_SIZE                         1
--#define SYSREG_I1M_OFFSET                       18
--#define SYSREG_I1M_SIZE                         1
--#define SYSREG_I2M_OFFSET                       19
--#define SYSREG_I2M_SIZE                         1
--#define SYSREG_I3M_OFFSET                       20
--#define SYSREG_I3M_SIZE                         1
--#define SYSREG_EM_OFFSET                        21
--#define SYSREG_EM_SIZE                          1
--#define SYSREG_M0_OFFSET                        22
--#define SYSREG_M0_SIZE                          1
--#define SYSREG_M1_OFFSET                        23
--#define SYSREG_M1_SIZE                          1
--#define SYSREG_M2_OFFSET                        24
--#define SYSREG_M2_SIZE                          1
--#define SYSREG_SR_D_OFFSET                      26
--#define SYSREG_SR_D_SIZE                        1
--#define SYSREG_DM_OFFSET                        27
--#define SYSREG_DM_SIZE                          1
--#define SYSREG_SR_J_OFFSET                      28
--#define SYSREG_SR_J_SIZE                        1
--#define SYSREG_R_OFFSET                         29
--#define SYSREG_R_SIZE                           1
--#define SYSREG_H_OFFSET                         30
--#define SYSREG_H_SIZE                           1
--
--/* Bitfields in EVBA */
--
--/* Bitfields in ACBA */
-+#define SYSREG_SR_C_OFFSET			0
-+#define SYSREG_SR_C_SIZE			1
-+#define SYSREG_Z_OFFSET				1
-+#define SYSREG_Z_SIZE				1
-+#define SYSREG_SR_N_OFFSET			2
-+#define SYSREG_SR_N_SIZE			1
-+#define SYSREG_SR_V_OFFSET			3
-+#define SYSREG_SR_V_SIZE			1
-+#define SYSREG_Q_OFFSET				4
-+#define SYSREG_Q_SIZE				1
-+#define SYSREG_L_OFFSET				5
-+#define SYSREG_L_SIZE				1
-+#define SYSREG_T_OFFSET				14
-+#define SYSREG_T_SIZE				1
-+#define SYSREG_SR_R_OFFSET			15
-+#define SYSREG_SR_R_SIZE			1
-+#define SYSREG_GM_OFFSET			16
-+#define SYSREG_GM_SIZE				1
-+#define SYSREG_I0M_OFFSET			17
-+#define SYSREG_I0M_SIZE				1
-+#define SYSREG_I1M_OFFSET			18
-+#define SYSREG_I1M_SIZE				1
-+#define SYSREG_I2M_OFFSET			19
-+#define SYSREG_I2M_SIZE				1
-+#define SYSREG_I3M_OFFSET			20
-+#define SYSREG_I3M_SIZE				1
-+#define SYSREG_EM_OFFSET			21
-+#define SYSREG_EM_SIZE				1
-+#define SYSREG_M0_OFFSET			22
-+#define SYSREG_M0_SIZE				1
-+#define SYSREG_M1_OFFSET			23
-+#define SYSREG_M1_SIZE				1
-+#define SYSREG_M2_OFFSET			24
-+#define SYSREG_M2_SIZE				1
-+#define SYSREG_SR_D_OFFSET			26
-+#define SYSREG_SR_D_SIZE			1
-+#define SYSREG_DM_OFFSET			27
-+#define SYSREG_DM_SIZE				1
-+#define SYSREG_SR_J_OFFSET			28
-+#define SYSREG_SR_J_SIZE			1
-+#define SYSREG_H_OFFSET				29
-+#define SYSREG_H_SIZE				1
- 
- /* Bitfields in CPUCR */
--#define SYSREG_BI_OFFSET                        0
--#define SYSREG_BI_SIZE                          1
--#define SYSREG_BE_OFFSET                        1
--#define SYSREG_BE_SIZE                          1
--#define SYSREG_FE_OFFSET                        2
--#define SYSREG_FE_SIZE                          1
--#define SYSREG_RE_OFFSET                        3
--#define SYSREG_RE_SIZE                          1
--#define SYSREG_IBE_OFFSET                       4
--#define SYSREG_IBE_SIZE                         1
--#define SYSREG_IEE_OFFSET                       5
--#define SYSREG_IEE_SIZE                         1
--
--/* Bitfields in ECR */
--#define SYSREG_ECR_OFFSET                       0
--#define SYSREG_ECR_SIZE                         32
--
--/* Bitfields in RSR_SUP */
--
--/* Bitfields in RSR_INT0 */
--
--/* Bitfields in RSR_INT1 */
--
--/* Bitfields in RSR_INT2 */
--
--/* Bitfields in RSR_INT3 */
--
--/* Bitfields in RSR_EX */
--
--/* Bitfields in RSR_NMI */
--
--/* Bitfields in RSR_DBG */
--
--/* Bitfields in RAR_SUP */
--
--/* Bitfields in RAR_INT0 */
--
--/* Bitfields in RAR_INT1 */
--
--/* Bitfields in RAR_INT2 */
--
--/* Bitfields in RAR_INT3 */
--
--/* Bitfields in RAR_EX */
--
--/* Bitfields in RAR_NMI */
--
--/* Bitfields in RAR_DBG */
--
--/* Bitfields in JECR */
--
--/* Bitfields in JOSP */
--
--/* Bitfields in JAVA_LV0 */
--
--/* Bitfields in JAVA_LV1 */
--
--/* Bitfields in JAVA_LV2 */
--
--/* Bitfields in JAVA_LV3 */
--
--/* Bitfields in JAVA_LV4 */
--
--/* Bitfields in JAVA_LV5 */
--
--/* Bitfields in JAVA_LV6 */
--
--/* Bitfields in JAVA_LV7 */
--
--/* Bitfields in JTBA */
--
--/* Bitfields in JBCR */
-+#define SYSREG_BI_OFFSET			0
-+#define SYSREG_BI_SIZE				1
-+#define SYSREG_BE_OFFSET			1
-+#define SYSREG_BE_SIZE				1
-+#define SYSREG_FE_OFFSET			2
-+#define SYSREG_FE_SIZE				1
-+#define SYSREG_RE_OFFSET			3
-+#define SYSREG_RE_SIZE				1
-+#define SYSREG_IBE_OFFSET			4
-+#define SYSREG_IBE_SIZE				1
-+#define SYSREG_IEE_OFFSET			5
-+#define SYSREG_IEE_SIZE				1
- 
- /* Bitfields in CONFIG0 */
--#define SYSREG_CONFIG0_D_OFFSET                 1
--#define SYSREG_CONFIG0_D_SIZE                   1
--#define SYSREG_CONFIG0_S_OFFSET                 2
--#define SYSREG_CONFIG0_S_SIZE                   1
--#define SYSREG_O_OFFSET                         3
--#define SYSREG_O_SIZE                           1
--#define SYSREG_P_OFFSET                         4
--#define SYSREG_P_SIZE                           1
--#define SYSREG_CONFIG0_J_OFFSET                 5
--#define SYSREG_CONFIG0_J_SIZE                   1
--#define SYSREG_F_OFFSET                         6
--#define SYSREG_F_SIZE                           1
--#define SYSREG_MMUT_OFFSET                      7
--#define SYSREG_MMUT_SIZE                        3
--#define SYSREG_AR_OFFSET                        10
--#define SYSREG_AR_SIZE                          3
--#define SYSREG_AT_OFFSET                        13
--#define SYSREG_AT_SIZE                          3
--#define SYSREG_PROCESSORREVISION_OFFSET         16
--#define SYSREG_PROCESSORREVISION_SIZE           8
--#define SYSREG_PROCESSORID_OFFSET               24
--#define SYSREG_PROCESSORID_SIZE                 8
-+#define SYSREG_CONFIG0_R_OFFSET			0
-+#define SYSREG_CONFIG0_R_SIZE			1
-+#define SYSREG_CONFIG0_D_OFFSET			1
-+#define SYSREG_CONFIG0_D_SIZE			1
-+#define SYSREG_CONFIG0_S_OFFSET			2
-+#define SYSREG_CONFIG0_S_SIZE			1
-+#define SYSREG_CONFIG0_O_OFFSET			3
-+#define SYSREG_CONFIG0_O_SIZE			1
-+#define SYSREG_CONFIG0_P_OFFSET			4
-+#define SYSREG_CONFIG0_P_SIZE			1
-+#define SYSREG_CONFIG0_J_OFFSET			5
-+#define SYSREG_CONFIG0_J_SIZE			1
-+#define SYSREG_CONFIG0_F_OFFSET			6
-+#define SYSREG_CONFIG0_F_SIZE			1
-+#define SYSREG_MMUT_OFFSET			7
-+#define SYSREG_MMUT_SIZE			3
-+#define SYSREG_AR_OFFSET			10
-+#define SYSREG_AR_SIZE				3
-+#define SYSREG_AT_OFFSET			13
-+#define SYSREG_AT_SIZE				3
-+#define SYSREG_PROCESSORREVISION_OFFSET		16
-+#define SYSREG_PROCESSORREVISION_SIZE		8
-+#define SYSREG_PROCESSORID_OFFSET		24
-+#define SYSREG_PROCESSORID_SIZE			8
- 
- /* Bitfields in CONFIG1 */
--#define SYSREG_DASS_OFFSET                      0
--#define SYSREG_DASS_SIZE                        3
--#define SYSREG_DLSZ_OFFSET                      3
--#define SYSREG_DLSZ_SIZE                        3
--#define SYSREG_DSET_OFFSET                      6
--#define SYSREG_DSET_SIZE                        4
--#define SYSREG_IASS_OFFSET                      10
--#define SYSREG_IASS_SIZE                        2
--#define SYSREG_ILSZ_OFFSET                      13
--#define SYSREG_ILSZ_SIZE                        3
--#define SYSREG_ISET_OFFSET                      16
--#define SYSREG_ISET_SIZE                        4
--#define SYSREG_DMMUSZ_OFFSET                    20
--#define SYSREG_DMMUSZ_SIZE                      6
--#define SYSREG_IMMUSZ_OFFSET                    26
--#define SYSREG_IMMUSZ_SIZE                      6
--
--/* Bitfields in COUNT */
--
--/* Bitfields in COMPARE */
-+#define SYSREG_DASS_OFFSET			0
-+#define SYSREG_DASS_SIZE			3
-+#define SYSREG_DLSZ_OFFSET			3
-+#define SYSREG_DLSZ_SIZE			3
-+#define SYSREG_DSET_OFFSET			6
-+#define SYSREG_DSET_SIZE			4
-+#define SYSREG_IASS_OFFSET			10
-+#define SYSREG_IASS_SIZE			3
-+#define SYSREG_ILSZ_OFFSET			13
-+#define SYSREG_ILSZ_SIZE			3
-+#define SYSREG_ISET_OFFSET			16
-+#define SYSREG_ISET_SIZE			4
-+#define SYSREG_DMMUSZ_OFFSET			20
-+#define SYSREG_DMMUSZ_SIZE			6
-+#define SYSREG_IMMUSZ_OFFSET			26
-+#define SYSREG_IMMUSZ_SIZE			6
- 
- /* Bitfields in TLBEHI */
--#define SYSREG_ASID_OFFSET                      0
--#define SYSREG_ASID_SIZE                        8
--#define SYSREG_TLBEHI_I_OFFSET                  8
--#define SYSREG_TLBEHI_I_SIZE                    1
--#define SYSREG_TLBEHI_V_OFFSET                  9
--#define SYSREG_TLBEHI_V_SIZE                    1
--#define SYSREG_VPN_OFFSET                       10
--#define SYSREG_VPN_SIZE                         22
-+#define SYSREG_ASID_OFFSET			0
-+#define SYSREG_ASID_SIZE			8
-+#define SYSREG_TLBEHI_I_OFFSET			8
-+#define SYSREG_TLBEHI_I_SIZE			1
-+#define SYSREG_TLBEHI_V_OFFSET			9
-+#define SYSREG_TLBEHI_V_SIZE			1
-+#define SYSREG_VPN_OFFSET			10
-+#define SYSREG_VPN_SIZE				22
- 
- /* Bitfields in TLBELO */
--#define SYSREG_W_OFFSET                         0
--#define SYSREG_W_SIZE                           1
--#define SYSREG_TLBELO_D_OFFSET                  1
--#define SYSREG_TLBELO_D_SIZE                    1
--#define SYSREG_SZ_OFFSET                        2
--#define SYSREG_SZ_SIZE                          2
--#define SYSREG_AP_OFFSET                        4
--#define SYSREG_AP_SIZE                          3
--#define SYSREG_B_OFFSET                         7
--#define SYSREG_B_SIZE                           1
--#define SYSREG_G_OFFSET                         8
--#define SYSREG_G_SIZE                           1
--#define SYSREG_TLBELO_C_OFFSET                  9
--#define SYSREG_TLBELO_C_SIZE                    1
--#define SYSREG_PFN_OFFSET                       10
--#define SYSREG_PFN_SIZE                         22
--
--/* Bitfields in PTBR */
--
--/* Bitfields in TLBEAR */
-+#define SYSREG_W_OFFSET				0
-+#define SYSREG_W_SIZE				1
-+#define SYSREG_TLBELO_D_OFFSET			1
-+#define SYSREG_TLBELO_D_SIZE			1
-+#define SYSREG_SZ_OFFSET			2
-+#define SYSREG_SZ_SIZE				2
-+#define SYSREG_AP_OFFSET			4
-+#define SYSREG_AP_SIZE				3
-+#define SYSREG_B_OFFSET				7
-+#define SYSREG_B_SIZE				1
-+#define SYSREG_G_OFFSET				8
-+#define SYSREG_G_SIZE				1
-+#define SYSREG_TLBELO_C_OFFSET			9
-+#define SYSREG_TLBELO_C_SIZE			1
-+#define SYSREG_PFN_OFFSET			10
-+#define SYSREG_PFN_SIZE				22
- 
- /* Bitfields in MMUCR */
--#define SYSREG_E_OFFSET                         0
--#define SYSREG_E_SIZE                           1
--#define SYSREG_M_OFFSET                         1
--#define SYSREG_M_SIZE                           1
--#define SYSREG_MMUCR_I_OFFSET                   2
--#define SYSREG_MMUCR_I_SIZE                     1
--#define SYSREG_MMUCR_N_OFFSET                   3
--#define SYSREG_MMUCR_N_SIZE                     1
--#define SYSREG_MMUCR_S_OFFSET                   4
--#define SYSREG_MMUCR_S_SIZE                     1
--#define SYSREG_DLA_OFFSET                       8
--#define SYSREG_DLA_SIZE                         6
--#define SYSREG_DRP_OFFSET                       14
--#define SYSREG_DRP_SIZE                         6
--#define SYSREG_ILA_OFFSET                       20
--#define SYSREG_ILA_SIZE                         6
--#define SYSREG_IRP_OFFSET                       26
--#define SYSREG_IRP_SIZE                         6
--
--/* Bitfields in TLBARLO */
--
--/* Bitfields in TLBARHI */
--
--/* Bitfields in PCCNT */
--
--/* Bitfields in PCNT0 */
--
--/* Bitfields in PCNT1 */
-+#define SYSREG_E_OFFSET				0
-+#define SYSREG_E_SIZE				1
-+#define SYSREG_M_OFFSET				1
-+#define SYSREG_M_SIZE				1
-+#define SYSREG_MMUCR_I_OFFSET			2
-+#define SYSREG_MMUCR_I_SIZE			1
-+#define SYSREG_MMUCR_N_OFFSET			3
-+#define SYSREG_MMUCR_N_SIZE			1
-+#define SYSREG_MMUCR_S_OFFSET			4
-+#define SYSREG_MMUCR_S_SIZE			1
-+#define SYSREG_DLA_OFFSET			8
-+#define SYSREG_DLA_SIZE				6
-+#define SYSREG_DRP_OFFSET			14
-+#define SYSREG_DRP_SIZE				6
-+#define SYSREG_ILA_OFFSET			20
-+#define SYSREG_ILA_SIZE				6
-+#define SYSREG_IRP_OFFSET			26
-+#define SYSREG_IRP_SIZE				6
- 
- /* Bitfields in PCCR */
--
--/* Bitfields in BEAR */
-+#define SYSREG_PCCR_R_OFFSET			1
-+#define SYSREG_PCCR_R_SIZE			1
-+#define SYSREG_PCCR_C_OFFSET			2
-+#define SYSREG_PCCR_C_SIZE			1
-+#define SYSREG_PCCR_S_OFFSET			3
-+#define SYSREG_PCCR_S_SIZE			1
-+#define SYSREG_IEC_OFFSET			4
-+#define SYSREG_IEC_SIZE				1
-+#define SYSREG_IE0_OFFSET			5
-+#define SYSREG_IE0_SIZE				1
-+#define SYSREG_IE1_OFFSET			6
-+#define SYSREG_IE1_SIZE				1
-+#define SYSREG_FC_OFFSET			8
-+#define SYSREG_FC_SIZE				1
-+#define SYSREG_F0_OFFSET			9
-+#define SYSREG_F0_SIZE				1
-+#define SYSREG_F1_OFFSET			10
-+#define SYSREG_F1_SIZE				1
-+#define SYSREG_CONF0_OFFSET			12
-+#define SYSREG_CONF0_SIZE			6
-+#define SYSREG_CONF1_OFFSET			18
-+#define SYSREG_CONF1_SIZE			6
- 
- /* Constants for ECR */
--#define ECR_UNRECOVERABLE                       0
--#define ECR_TLB_MULTIPLE                        1
--#define ECR_BUS_ERROR_WRITE                     2
--#define ECR_BUS_ERROR_READ                      3
--#define ECR_NMI                                 4
--#define ECR_ADDR_ALIGN_X                        5
--#define ECR_PROTECTION_X                        6
--#define ECR_DEBUG                               7
--#define ECR_ILLEGAL_OPCODE                      8
--#define ECR_UNIMPL_INSTRUCTION                  9
--#define ECR_PRIVILEGE_VIOLATION                 10
--#define ECR_FPE                                 11
--#define ECR_COPROC_ABSENT                       12
--#define ECR_ADDR_ALIGN_R                        13
--#define ECR_ADDR_ALIGN_W                        14
--#define ECR_PROTECTION_R                        15
--#define ECR_PROTECTION_W                        16
--#define ECR_DTLB_MODIFIED                       17
--#define ECR_TLB_MISS_X                          20
--#define ECR_TLB_MISS_R                          24
--#define ECR_TLB_MISS_W                          28
-+#define ECR_UNRECOVERABLE			0
-+#define ECR_TLB_MULTIPLE			1
-+#define ECR_BUS_ERROR_WRITE			2
-+#define ECR_BUS_ERROR_READ			3
-+#define ECR_NMI					4
-+#define ECR_ADDR_ALIGN_X			5
-+#define ECR_PROTECTION_X			6
-+#define ECR_DEBUG				7
-+#define ECR_ILLEGAL_OPCODE			8
-+#define ECR_UNIMPL_INSTRUCTION			9
-+#define ECR_PRIVILEGE_VIOLATION			10
-+#define ECR_FPE					11
-+#define ECR_COPROC_ABSENT			12
-+#define ECR_ADDR_ALIGN_R			13
-+#define ECR_ADDR_ALIGN_W			14
-+#define ECR_PROTECTION_R			15
-+#define ECR_PROTECTION_W			16
-+#define ECR_DTLB_MODIFIED			17
-+#define ECR_TLB_MISS_X				20
-+#define ECR_TLB_MISS_R				24
-+#define ECR_TLB_MISS_W				28
- 
- /* Bit manipulation macros */
--#define SYSREG_BIT(name)                        (1 << SYSREG_##name##_OFFSET)
--#define SYSREG_BF(name,value)                   (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) << SYSREG_##name##_OFFSET)
--#define SYSREG_BFEXT(name,value)                (((value) >> SYSREG_##name##_OFFSET) & ((1 << SYSREG_##name##_SIZE) - 1))
--#define SYSREG_BFINS(name,value,old)            (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) << SYSREG_##name##_OFFSET)) | SYSREG_BF(name,value))
-+#define SYSREG_BIT(name)				\
-+	(1 << SYSREG_##name##_OFFSET)
-+#define SYSREG_BF(name,value)				\
-+	(((value) & ((1 << SYSREG_##name##_SIZE) - 1))	\
-+	 << SYSREG_##name##_OFFSET)
-+#define SYSREG_BFEXT(name,value)\
-+	(((value) >> SYSREG_##name##_OFFSET)		\
-+	 & ((1 << SYSREG_##name##_SIZE) - 1))
-+#define SYSREG_BFINS(name,value,old)			\
-+	(((old) & ~(((1 << SYSREG_##name##_SIZE) - 1)	\
-+		    << SYSREG_##name##_OFFSET))		\
-+	 | SYSREG_BF(name,value))
- 
-+/* Register access macros */
- #ifdef __CHECKER__
- extern unsigned long __builtin_mfsr(unsigned long reg);
- extern void __builtin_mtsr(unsigned long reg, unsigned long value);
- #endif
- 
--/* Register access macros */
--#define sysreg_read(reg)                        __builtin_mfsr(SYSREG_##reg)
--#define sysreg_write(reg, value)                __builtin_mtsr(SYSREG_##reg, value)
-+#define sysreg_read(reg)		__builtin_mfsr(SYSREG_##reg)
-+#define sysreg_write(reg, value)	__builtin_mtsr(SYSREG_##reg, value)
- 
--#endif /* __ASM_AVR32_SYSREG_H__ */
-+#endif /* __ASM_AVR32_SYSREG_H */
-diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h
-index ac59605..a8236ba 100644
---- a/include/asm-avr32/system.h
-+++ b/include/asm-avr32/system.h
-@@ -9,6 +9,7 @@
- #define __ASM_AVR32_SYSTEM_H
- 
- #include <linux/compiler.h>
-+#include <linux/linkage.h>
- #include <linux/types.h>
- 
- #include <asm/ptrace.h>
-@@ -140,15 +141,9 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
- 				   sizeof(*(ptr))))
- 
- struct pt_regs;
--extern void __die(const char *, struct pt_regs *, unsigned long,
--		  const char *, const char *, unsigned long);
--extern void __die_if_kernel(const char *, struct pt_regs *, unsigned long,
--			    const char *, const char *, unsigned long);
--
--#define die(msg, regs, err)					\
--	__die(msg, regs, err, __FILE__ ":", __FUNCTION__, __LINE__)
--#define die_if_kernel(msg, regs, err)					\
--	__die_if_kernel(msg, regs, err, __FILE__ ":", __FUNCTION__, __LINE__)
-+void NORET_TYPE die(const char *str, struct pt_regs *regs, long err);
-+void _exception(long signr, struct pt_regs *regs, int code,
-+		unsigned long addr);
- 
- #define arch_align_stack(x)	(x)
- 
-diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h
-index d1f5b35..a2e606d 100644
---- a/include/asm-avr32/thread_info.h
-+++ b/include/asm-avr32/thread_info.h
-@@ -83,6 +83,7 @@ static inline struct thread_info *current_thread_info(void)
- #define TIF_SINGLE_STEP		6	/* single step after next break */
- #define TIF_MEMDIE		7
- #define TIF_RESTORE_SIGMASK	8	/* restore signal mask in do_signal */
-+#define TIF_CPU_GOING_TO_SLEEP	9	/* CPU is entering sleep 0 mode */
- #define TIF_USERSPACE		31      /* true if FS sets userspace */
- 
- #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-@@ -94,6 +95,7 @@ static inline struct thread_info *current_thread_info(void)
- #define _TIF_SINGLE_STEP	(1 << TIF_SINGLE_STEP)
- #define _TIF_MEMDIE		(1 << TIF_MEMDIE)
- #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
-+#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
- 
- /* XXX: These two masks must never span more than 16 bits! */
- /* work to do on interrupt/exception return */
-diff --git a/include/asm-avr32/uaccess.h b/include/asm-avr32/uaccess.h
-index 74a679e..ed09239 100644
---- a/include/asm-avr32/uaccess.h
-+++ b/include/asm-avr32/uaccess.h
-@@ -181,24 +181,23 @@ extern int __put_user_bad(void);
- 
- #define __get_user_nocheck(x, ptr, size)				\
- ({									\
--	typeof(*(ptr)) __gu_val = (typeof(*(ptr)) __force)0;		\
-+	unsigned long __gu_val = 0;					\
- 	int __gu_err = 0;						\
- 									\
- 	switch (size) {							\
- 	case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break;	\
- 	case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break;	\
- 	case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break;	\
--	case 8: __get_user_asm("d", __gu_val, ptr, __gu_err); break;	\
- 	default: __gu_err = __get_user_bad(); break;			\
- 	}								\
- 									\
--	x = __gu_val;							\
-+	x = (typeof(*(ptr)))__gu_val;					\
- 	__gu_err;							\
- })
- 
- #define __get_user_check(x, ptr, size)					\
- ({									\
--	typeof(*(ptr)) __gu_val = (typeof(*(ptr)) __force)0;		\
-+	unsigned long __gu_val = 0;					\
- 	const typeof(*(ptr)) __user * __gu_addr = (ptr);		\
- 	int __gu_err = 0;						\
- 									\
-@@ -216,10 +215,6 @@ extern int __put_user_bad(void);
- 			__get_user_asm("w", __gu_val, __gu_addr,	\
- 				       __gu_err);			\
- 			break;						\
--		case 8:							\
--			__get_user_asm("d", __gu_val, __gu_addr,	\
--				       __gu_err);			\
--			break;						\
- 		default:						\
- 			__gu_err = __get_user_bad();			\
- 			break;						\
-@@ -227,7 +222,7 @@ extern int __put_user_bad(void);
- 	} else {							\
- 		__gu_err = -EFAULT;					\
- 	}								\
--	x = __gu_val;							\
-+	x = (typeof(*(ptr)))__gu_val;					\
- 	__gu_err;							\
- })
- 
-diff --git a/include/asm-avr32/unaligned.h b/include/asm-avr32/unaligned.h
-index 3042723..7913617 100644
---- a/include/asm-avr32/unaligned.h
-+++ b/include/asm-avr32/unaligned.h
-@@ -6,20 +6,31 @@
-  * implementation.  The AVR32 AP implementation can handle unaligned
-  * words, but halfwords must be halfword-aligned, and doublewords must
-  * be word-aligned.
-- *
-- * TODO: Make all this CPU-specific and optimize.
-  */
- 
--#include <linux/string.h>
-+#include <asm-generic/unaligned.h>
- 
--/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
-+#ifdef CONFIG_CPU_AT32AP7000
- 
-+/* REVISIT calling memmove() may be smaller for 64-bit values ... */
-+
-+#undef get_unaligned
- #define get_unaligned(ptr) \
--  ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
-+	___get_unaligned(ptr, sizeof((*ptr)))
-+#define ___get_unaligned(ptr, size) \
-+	((size == 4) ? *(ptr) : __get_unaligned(ptr, size))
-+
-+#undef put_unaligned
-+#define put_unaligned(val, ptr) \
-+	___put_unaligned((__u64)(val), ptr, sizeof((*ptr)))
-+#define ___put_unaligned(val, ptr, size)		\
-+do {							\
-+	if (size == 4)					\
-+		*(ptr) = (val);				\
-+	else						\
-+		__put_unaligned(val, ptr, size);	\
-+} while (0)
- 
--#define put_unaligned(val, ptr)				\
--  ({ __typeof__(*(ptr)) __tmp = (val);			\
--     memmove((ptr), &__tmp, sizeof(*(ptr)));		\
--     (void)0; })
-+#endif
- 
- #endif /* __ASM_AVR32_UNALIGNED_H */
-diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h
-index 8a05aa1..2687c77 100644
---- a/include/asm-frv/pgtable.h
-+++ b/include/asm-frv/pgtable.h
-@@ -509,10 +509,6 @@ static inline int pte_file(pte_t pte)
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
- #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-diff --git a/include/asm-frv/scatterlist.h b/include/asm-frv/scatterlist.h
-index fb38fd3..8e827fa 100644
---- a/include/asm-frv/scatterlist.h
-+++ b/include/asm-frv/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef _ASM_SCATTERLIST_H
- #define _ASM_SCATTERLIST_H
- 
-+#include <asm/types.h>
-+
- /*
-  * Drivers must set either ->address or (preferred) ->page and ->offset
-  * to indicate where data must be transferred to/from.
-diff --git a/include/asm-h8300/pgtable.h b/include/asm-h8300/pgtable.h
-index 8b7c685..170ea02 100644
---- a/include/asm-h8300/pgtable.h
-+++ b/include/asm-h8300/pgtable.h
-@@ -55,10 +55,6 @@ extern int is_in_rom(unsigned long);
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- /*
-  * All 32bit addresses are effectively valid for vmalloc...
-  * Sort of meaningless for non-VM targets.
-diff --git a/include/asm-h8300/scatterlist.h b/include/asm-h8300/scatterlist.h
-index 7627f0c..985fdf5 100644
---- a/include/asm-h8300/scatterlist.h
-+++ b/include/asm-h8300/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef _H8300_SCATTERLIST_H
- #define _H8300_SCATTERLIST_H
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
- 	struct page	*page;
- 	unsigned int	offset;
-diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
-index c3b58d4..994cf30 100644
---- a/include/asm-i386/pgtable.h
-+++ b/include/asm-i386/pgtable.h
-@@ -519,10 +519,6 @@ do {									\
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- #include <asm-generic/pgtable.h>
- 
- #endif /* _I386_PGTABLE_H */
-diff --git a/include/asm-i386/scatterlist.h b/include/asm-i386/scatterlist.h
-index 55d6c95..d7e45a8 100644
---- a/include/asm-i386/scatterlist.h
-+++ b/include/asm-i386/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef _I386_SCATTERLIST_H
- #define _I386_SCATTERLIST_H
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
-     struct page		*page;
-     unsigned int	offset;
-diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
-index 5531827..670b706 100644
---- a/include/asm-ia64/pgtable.h
-+++ b/include/asm-ia64/pgtable.h
-@@ -485,10 +485,6 @@ extern void paging_init (void);
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- /*
-  * ZERO_PAGE is a global shared page that is always zero: used
-  * for zero-mapped memory areas etc..
-diff --git a/include/asm-ia64/scatterlist.h b/include/asm-ia64/scatterlist.h
-index 9dbea88..a452ea2 100644
---- a/include/asm-ia64/scatterlist.h
-+++ b/include/asm-ia64/scatterlist.h
-@@ -6,6 +6,8 @@
-  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
-  */
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
- 	struct page *page;
- 	unsigned int offset;
-diff --git a/include/asm-m32r/pgtable.h b/include/asm-m32r/pgtable.h
-index 1c15ba7..8b2a2f1 100644
---- a/include/asm-m32r/pgtable.h
-+++ b/include/asm-m32r/pgtable.h
-@@ -381,10 +381,6 @@ static inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
- #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-diff --git a/include/asm-m32r/scatterlist.h b/include/asm-m32r/scatterlist.h
-index c2de96c..352415f 100644
---- a/include/asm-m32r/scatterlist.h
-+++ b/include/asm-m32r/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef _ASM_M32R_SCATTERLIST_H
- #define _ASM_M32R_SCATTERLIST_H
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
-     char *  address;    /* Location data is to be transferred to, NULL for
-                          * highmem page */
-diff --git a/include/asm-m68k/pgtable.h b/include/asm-m68k/pgtable.h
-index f3aa053..555b87a 100644
---- a/include/asm-m68k/pgtable.h
-+++ b/include/asm-m68k/pgtable.h
-@@ -143,10 +143,6 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- /* MMU-specific headers */
- 
- #ifdef CONFIG_SUN3
-diff --git a/include/asm-m68knommu/pgtable.h b/include/asm-m68knommu/pgtable.h
-index 549ad23..9dfbbc2 100644
---- a/include/asm-m68knommu/pgtable.h
-+++ b/include/asm-m68knommu/pgtable.h
-@@ -59,10 +59,6 @@ extern int is_in_rom(unsigned long);
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- /*
-  * All 32bit addresses are effectively valid for vmalloc...
-  * Sort of meaningless for non-VM targets.
-diff --git a/include/asm-m68knommu/scatterlist.h b/include/asm-m68knommu/scatterlist.h
-index 2085d6f..4da79d3 100644
---- a/include/asm-m68knommu/scatterlist.h
-+++ b/include/asm-m68knommu/scatterlist.h
-@@ -2,6 +2,7 @@
- #define _M68KNOMMU_SCATTERLIST_H
- 
- #include <linux/mm.h>
-+#include <asm/types.h>
- 
- struct scatterlist {
- 	struct page	*page;
-diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
-index 0d3295f..27d77d9 100644
---- a/include/asm-mips/pgtable.h
-+++ b/include/asm-mips/pgtable.h
-@@ -387,10 +387,6 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma,
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- #endif
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- #include <asm-generic/pgtable.h>
- 
- /*
-diff --git a/include/asm-mips/scatterlist.h b/include/asm-mips/scatterlist.h
-index 2263470..7af104c 100644
---- a/include/asm-mips/scatterlist.h
-+++ b/include/asm-mips/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef __ASM_SCATTERLIST_H
- #define __ASM_SCATTERLIST_H
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
- 	struct page *	page;
- 	unsigned int	offset;
-diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h
-index d7e1b10..beb2adb 100644
---- a/include/asm-parisc/pgtable.h
-+++ b/include/asm-parisc/pgtable.h
-@@ -528,10 +528,6 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
- 
- #define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- /* We provide our own get_unmapped_area to provide cache coherency */
- 
- #define HAVE_ARCH_UNMAPPED_AREA
-diff --git a/include/asm-parisc/scatterlist.h b/include/asm-parisc/scatterlist.h
-index 236c1d0..e7211c7 100644
---- a/include/asm-parisc/scatterlist.h
-+++ b/include/asm-parisc/scatterlist.h
-@@ -2,6 +2,7 @@
- #define _ASM_PARISC_SCATTERLIST_H
- 
- #include <asm/page.h>
-+#include <asm/types.h>
- 
- struct scatterlist {
- 	struct page *page;
-diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
-index b1fdbf4..bed452d 100644
---- a/include/asm-ppc/pgtable.h
-+++ b/include/asm-ppc/pgtable.h
-@@ -827,10 +827,6 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma,
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- #endif
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- /*
-  * No page table caches to initialise
-  */
-diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
-index 184d7fc..5b523c7 100644
---- a/include/asm-sh/pgtable.h
-+++ b/include/asm-sh/pgtable.h
-@@ -568,10 +568,6 @@ typedef pte_t *pte_addr_t;
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- struct mm_struct;
- 
- /*
-diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h
-index d19e7cd..b9ae53c 100644
---- a/include/asm-sh/scatterlist.h
-+++ b/include/asm-sh/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef __ASM_SH_SCATTERLIST_H
- #define __ASM_SH_SCATTERLIST_H
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
-     struct page * page; /* Location for highmem page, if any */
-     unsigned int offset;/* for highmem, page offset */
-diff --git a/include/asm-sh64/pgtable.h b/include/asm-sh64/pgtable.h
-index 6b97c4c..b875482 100644
---- a/include/asm-sh64/pgtable.h
-+++ b/include/asm-sh64/pgtable.h
-@@ -485,10 +485,6 @@ extern void update_mmu_cache(struct vm_area_struct * vma,
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- #endif /* !__ASSEMBLY__ */
- 
- /*
-diff --git a/include/asm-sh64/scatterlist.h b/include/asm-sh64/scatterlist.h
-index 5d8fa32..1c723f2 100644
---- a/include/asm-sh64/scatterlist.h
-+++ b/include/asm-sh64/scatterlist.h
-@@ -11,6 +11,8 @@
- #ifndef __ASM_SH64_SCATTERLIST_H
- #define __ASM_SH64_SCATTERLIST_H
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
-     struct page * page; /* Location for highmem page, if any */
-     unsigned int offset;/* for highmem, page offset */
-diff --git a/include/asm-sparc64/scatterlist.h b/include/asm-sparc64/scatterlist.h
-index ec4f3c6..048fdb4 100644
---- a/include/asm-sparc64/scatterlist.h
-+++ b/include/asm-sparc64/scatterlist.h
-@@ -3,6 +3,7 @@
- #define _SPARC64_SCATTERLIST_H
- 
- #include <asm/page.h>
-+#include <asm/types.h>
- 
- struct scatterlist {
- 	struct page	*page;
-diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h
-index af1cba6..56f4029 100644
---- a/include/asm-v850/scatterlist.h
-+++ b/include/asm-v850/scatterlist.h
-@@ -14,6 +14,8 @@
- #ifndef __V850_SCATTERLIST_H__
- #define __V850_SCATTERLIST_H__
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
- 	struct page	*page;
- 	unsigned	offset;
-diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h
-index 730bd60..1eb1043 100644
---- a/include/asm-x86_64/pgtable.h
-+++ b/include/asm-x86_64/pgtable.h
-@@ -413,10 +413,6 @@ extern int kern_addr_valid(unsigned long addr);
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
- 		remap_pfn_range(vma, vaddr, pfn, size, prot)
- 
--#define MK_IOSPACE_PFN(space, pfn)	(pfn)
--#define GET_IOSPACE(pfn)		0
--#define GET_PFN(pfn)			(pfn)
--
- #define HAVE_ARCH_UNMAPPED_AREA
- 
- #define pgtable_cache_init()   do { } while (0)
-diff --git a/include/asm-x86_64/scatterlist.h b/include/asm-x86_64/scatterlist.h
-index 49d89f8..eaf7ada 100644
---- a/include/asm-x86_64/scatterlist.h
-+++ b/include/asm-x86_64/scatterlist.h
-@@ -1,6 +1,8 @@
- #ifndef _X8664_SCATTERLIST_H
- #define _X8664_SCATTERLIST_H
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
-     struct page		*page;
-     unsigned int	offset;
-diff --git a/include/asm-xtensa/scatterlist.h b/include/asm-xtensa/scatterlist.h
-index 38a2b9a..ca337a2 100644
---- a/include/asm-xtensa/scatterlist.h
-+++ b/include/asm-xtensa/scatterlist.h
-@@ -11,6 +11,8 @@
- #ifndef _XTENSA_SCATTERLIST_H
- #define _XTENSA_SCATTERLIST_H
- 
-+#include <asm/types.h>
-+
- struct scatterlist {
- 	struct page 	*page;
- 	unsigned int	offset;
-diff --git a/include/linux/fb.h b/include/linux/fb.h
-index be913ec..deb2365 100644
---- a/include/linux/fb.h
-+++ b/include/linux/fb.h
-@@ -833,7 +833,7 @@ struct fb_info {
- #define fb_writeq sbus_writeq
- #define fb_memset sbus_memset_io
- 
--#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__)
-+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__)
- 
- #define fb_readb __raw_readb
- #define fb_readw __raw_readw
-diff --git a/include/linux/gpio_mouse.h b/include/linux/gpio_mouse.h
-new file mode 100644
-index 0000000..7796683
---- /dev/null
-+++ b/include/linux/gpio_mouse.h
-@@ -0,0 +1,47 @@
-+/*
-+ * Driver for simulating a mouse on GPIO lines.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GPIO_MOUSE_H
-+#define _GPIO_MOUSE_H
-+
-+#define GPIO_MOUSE_POLARITY_ACT_HIGH	0x00
-+#define GPIO_MOUSE_POLARITY_ACT_LOW	0x01
-+
-+/**
-+ * struct gpio_mouse_platform_data
-+ * @scan_ms: integer in ms specifying the scan periode.
-+ * @polarity: Pin polarity, active high or low.
-+ * @up: GPIO line for up value.
-+ * @down: GPIO line for down value.
-+ * @left: GPIO line for left value.
-+ * @right: GPIO line for right value.
-+ * @bleft: GPIO line for left button.
-+ * @bright: GPIO line for right button.
-+ * @bmiddle: GPIO line for middle button.
-+ *
-+ * This struct must be added to the platform_device in the board code. It is
-+ * used by the gpio_mouse driver to setup GPIO lines, calculate mouse movement
-+ * and have a reference to the timer used for scanning.
-+ */
-+struct gpio_mouse_platform_data {
-+	int scan_ms;
-+	int polarity;
-+
-+	int up;
-+	int down;
-+	int left;
-+	int right;
-+
-+	int bleft;
-+	int bmiddle;
-+	int bright;
-+};
-+
-+#endif /* _GPIO_MOUSE_H */
-diff --git a/include/linux/i2c-gpio.h b/include/linux/i2c-gpio.h
-new file mode 100644
-index 0000000..c1bcb1f
---- /dev/null
-+++ b/include/linux/i2c-gpio.h
-@@ -0,0 +1,38 @@
-+/*
-+ * i2c-gpio interface to platform code
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef _LINUX_I2C_GPIO_H
-+#define _LINUX_I2C_GPIO_H
-+
-+/**
-+ * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
-+ * @sda_pin: GPIO pin ID to use for SDA
-+ * @scl_pin: GPIO pin ID to use for SCL
-+ * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
-+ * @timeout: clock stretching timeout in jiffies. If the slave keeps
-+ *	SCL low for longer than this, the transfer will time out.
-+ * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin
-+ *	isn't actively driven high when setting the output value high.
-+ *	gpio_get_value() must return the actual pin state even if the
-+ *	pin is configured as an output.
-+ * @scl_is_open_drain: SCL is set up as open drain. Same requirements
-+ *	as for sda_is_open_drain apply.
-+ * @scl_is_output_only: SCL output drivers cannot be turned off.
-+ */
-+struct i2c_gpio_platform_data {
-+	unsigned int	sda_pin;
-+	unsigned int	scl_pin;
-+	int		udelay;
-+	int		timeout;
-+	unsigned int	sda_is_open_drain:1;
-+	unsigned int	scl_is_open_drain:1;
-+	unsigned int	scl_is_output_only:1;
-+};
-+
-+#endif /* _LINUX_I2C_GPIO_H */
-diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
-new file mode 100644
-index 0000000..44ebe7d
---- /dev/null
-+++ b/include/linux/spi/at73c213.h
-@@ -0,0 +1,26 @@
-+/*
-+ * Board-specific data used to set up AT73c213 audio DAC driver.
-+ */
-+
-+struct at73c213_board_info {
-+
-+	/* This identifies a clock suitable for clk_get(NULL, dac_clk).
-+	 * One might expect something like clk_get(&spidev->dev, "dac") to
-+	 * work, but current clock framework implementations don't support
-+	 * association of such clocks with non-core (e.g. SPI) devices.
-+	 */
-+	char	dac_clk[8];
-+
-+	/* SPI is used only for the control interface.  Data is streamed
-+	 * using "I2S" formats through a different interface, with its own
-+	 * driver and associated resources (registers, irq, clock).
-+	 */
-+	int	i2s_dev;
-+
-+	/* this name is seen by userspace tools */
-+	char	shortname[32];
-+
-+	/* REVISIT should target bitrate be provided here?
-+	 * It can not be provided here, as it has to be calculated when probed
-+	 */
-+};
-diff --git a/include/linux/ssc.h b/include/linux/ssc.h
-new file mode 100644
-index 0000000..9705e4a
---- /dev/null
-+++ b/include/linux/ssc.h
-@@ -0,0 +1,355 @@
-+#ifndef __INCLUDE_ATMEL_SSC_H
-+#define __INCLUDE_ATMEL_SSC_H
-+
-+#include <linux/platform_device.h>
-+#include <asm/irq.h>
-+
-+#define ATMEL_SSC_MODE_I2S_MASTER	0x00000001
-+#define ATMEL_SSC_MODE_I2S_SLAVE	0x00000002
-+#define ATMEL_SSC_MODE_SPI_MASTER	0x00000003
-+
-+#define ATMEL_SSC_SPI_MODE0	0	/* SPI: CPOL = 0, CPHA = 1 */
-+#define ATMEL_SSC_SPI_MODE1	1	/* SPI: CPOL = 0, CHPA = 0 */
-+#define ATMEL_SSC_SPI_MODE2	2	/* SPI: CPOL = 1, CPHA = 1 */
-+#define ATMEL_SSC_SPI_MODE3	3	/* SPI: CPOL = 1, CPHA = 0 */
-+
-+struct ssc_device {
-+	void __iomem		*regs;
-+	struct platform_device	*pdev;
-+	struct clk		*clk;
-+	char			name[6];
-+	int			user;
-+	int			irq;
-+};
-+
-+struct ssc_mode {
-+	unsigned int	mode;
-+	unsigned int	bauddiv;
-+	unsigned int	data_length;
-+	unsigned int	ssc_rxtx;
-+	unsigned int	spi_mode;
-+	unsigned int	spi_cs_pio_pin;
-+};
-+
-+struct ssc_xfer_info {
-+	unsigned long	data;
-+	unsigned long	len;
-+	unsigned long	next_data;
-+	unsigned long	next_len;
-+};
-+
-+struct ssc_device* __must_check ssc_request(unsigned int ssc_num);
-+void ssc_free(struct ssc_device *ssc);
-+
-+int ssc_set_mode(struct ssc_device *ssc, struct ssc_mode *mode);
-+
-+int ssc_set_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
-+int ssc_get_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
-+int ssc_set_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
-+int ssc_get_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
-+
-+int ssc_enable(struct ssc_device *ssc, char tx, char rx);
-+int ssc_enable_xfer(struct ssc_device *ssc, char tx, char rx);
-+int ssc_disable(struct ssc_device *ssc, char tx, char rx);
-+int ssc_disable_xfer(struct ssc_device *ssc, char tx, char rx);
-+
-+int ssc_enable_int(struct ssc_device *ssc, unsigned int mask);
-+int ssc_disable_int(struct ssc_device *ssc, unsigned int mask);
-+int ssc_get_int_mask(struct ssc_device *ssc, unsigned int *mask);
-+
-+int ssc_clk_get_rate(struct ssc_device *ssc);
-+
-+int ssc_to_irq(struct ssc_device *ssc);
-+struct ssc_device* irq_to_ssc(unsigned int irq);
-+
-+void at32_init_ssc(struct platform_device *pdev);
-+
-+/* SSC register offsets */
-+
-+/* SSC Control Register */
-+#define SSC_CR				0x00000000
-+#define SSC_CR_RXDIS_SIZE			 1
-+#define SSC_CR_RXDIS_OFFSET			 1
-+#define SSC_CR_RXEN_SIZE			 1
-+#define SSC_CR_RXEN_OFFSET			 0
-+#define SSC_CR_SWRST_SIZE			 1
-+#define SSC_CR_SWRST_OFFSET			15
-+#define SSC_CR_TXDIS_SIZE			 1
-+#define SSC_CR_TXDIS_OFFSET			 9
-+#define SSC_CR_TXEN_SIZE			 1
-+#define SSC_CR_TXEN_OFFSET			 8
-+
-+/* SSC Clock Mode Register */
-+#define SSC_CMR				0x00000004
-+#define SSC_CMR_DIV_SIZE			12
-+#define SSC_CMR_DIV_OFFSET			 0
-+
-+/* SSC Receive Clock Mode Register */
-+#define SSC_RCMR			0x00000010
-+#define SSC_RCMR_CKG_SIZE			 2
-+#define SSC_RCMR_CKG_OFFSET			 6
-+#define SSC_RCMR_CKI_SIZE			 1
-+#define SSC_RCMR_CKI_OFFSET			 5
-+#define SSC_RCMR_CKO_SIZE			 3
-+#define SSC_RCMR_CKO_OFFSET			 2
-+#define SSC_RCMR_CKS_SIZE			 2
-+#define SSC_RCMR_CKS_OFFSET			 0
-+#define SSC_RCMR_PERIOD_SIZE			 8
-+#define SSC_RCMR_PERIOD_OFFSET			24
-+#define SSC_RCMR_START_SIZE			 4
-+#define SSC_RCMR_START_OFFSET			 8
-+#define SSC_RCMR_STOP_SIZE			 1
-+#define SSC_RCMR_STOP_OFFSET			12
-+#define SSC_RCMR_STTDLY_SIZE			 8
-+#define SSC_RCMR_STTDLY_OFFSET			16
-+
-+/* SSC Receive Frame Mode Register */
-+#define SSC_RFMR			0x00000014
-+#define SSC_RFMR_DATLEN_SIZE			 5
-+#define SSC_RFMR_DATLEN_OFFSET			 0
-+#define SSC_RFMR_DATNB_SIZE			 4
-+#define SSC_RFMR_DATNB_OFFSET			 8
-+#define SSC_RFMR_FSEDGE_SIZE			 1
-+#define SSC_RFMR_FSEDGE_OFFSET			24
-+#define SSC_RFMR_FSLEN_SIZE			 4
-+#define SSC_RFMR_FSLEN_OFFSET			16
-+#define SSC_RFMR_FSOS_SIZE			 4
-+#define SSC_RFMR_FSOS_OFFSET			20
-+#define SSC_RFMR_LOOP_SIZE			 1
-+#define SSC_RFMR_LOOP_OFFSET			 5
-+#define SSC_RFMR_MSBF_SIZE			 1
-+#define SSC_RFMR_MSBF_OFFSET			 7
-+
-+/* SSC Transmit Clock Mode Register */
-+#define SSC_TCMR			0x00000018
-+#define SSC_TCMR_CKG_SIZE			 2
-+#define SSC_TCMR_CKG_OFFSET			 6
-+#define SSC_TCMR_CKI_SIZE			 1
-+#define SSC_TCMR_CKI_OFFSET			 5
-+#define SSC_TCMR_CKO_SIZE			 3
-+#define SSC_TCMR_CKO_OFFSET			 2
-+#define SSC_TCMR_CKS_SIZE			 2
-+#define SSC_TCMR_CKS_OFFSET			 0
-+#define SSC_TCMR_PERIOD_SIZE			 8
-+#define SSC_TCMR_PERIOD_OFFSET			24
-+#define SSC_TCMR_START_SIZE			 4
-+#define SSC_TCMR_START_OFFSET			 8
-+#define SSC_TCMR_STTDLY_SIZE			 8
-+#define SSC_TCMR_STTDLY_OFFSET			16
-+
-+/* SSC Transmit Frame Mode Register */
-+#define SSC_TFMR			0x0000001c
-+#define SSC_TFMR_DATDEF_SIZE			 1
-+#define SSC_TFMR_DATDEF_OFFSET			 5
-+#define SSC_TFMR_DATLEN_SIZE			 5
-+#define SSC_TFMR_DATLEN_OFFSET			 0
-+#define SSC_TFMR_DATNB_SIZE			 4
-+#define SSC_TFMR_DATNB_OFFSET			 8
-+#define SSC_TFMR_FSDEN_SIZE			 1
-+#define SSC_TFMR_FSDEN_OFFSET			23
-+#define SSC_TFMR_FSEDGE_SIZE			 1
-+#define SSC_TFMR_FSEDGE_OFFSET			24
-+#define SSC_TFMR_FSLEN_SIZE			 4
-+#define SSC_TFMR_FSLEN_OFFSET			16
-+#define SSC_TFMR_FSOS_SIZE			 3
-+#define SSC_TFMR_FSOS_OFFSET			20
-+#define SSC_TFMR_MSBF_SIZE			 1
-+#define SSC_TFMR_MSBF_OFFSET			 7
-+
-+/* SSC Receive Hold Register */
-+#define SSC_RHR				0x00000020
-+#define SSC_RHR_RDAT_SIZE			32
-+#define SSC_RHR_RDAT_OFFSET			 0
-+
-+/* SSC Transmit Hold Register */
-+#define SSC_THR				0x00000024
-+#define SSC_THR_TDAT_SIZE			32
-+#define SSC_THR_TDAT_OFFSET			 0
-+
-+/* SSC Receive Sync. Holding Register */
-+#define SSC_RSHR			0x00000030
-+#define SSC_RSHR_RSDAT_SIZE			16
-+#define SSC_RSHR_RSDAT_OFFSET			 0
-+
-+/* SSC Transmit Sync. Holding Register */
-+#define SSC_TSHR			0x00000034
-+#define SSC_TSHR_TSDAT_SIZE			16
-+#define SSC_TSHR_RSDAT_OFFSET			 0
-+
-+/* SSC Receive Compare 0 Register */
-+#define SSC_RC0R			0x00000038
-+#define SSC_RC0R_CP0_SIZE			16
-+#define SSC_RC0R_CP0_OFFSET			 0
-+
-+/* SSC Receive Compare 1 Register */
-+#define SSC_RC1R			0x0000003c
-+#define SSC_RC1R_CP1_SIZE			16
-+#define SSC_RC1R_CP1_OFFSET			 0
-+
-+/* SSC Status Register */
-+#define SSC_SR				0x00000040
-+#define SSC_SR_CP0_SIZE				 1
-+#define SSC_SR_CP0_OFFSET			 8
-+#define SSC_SR_CP1_SIZE				 1
-+#define SSC_SR_CP1_OFFSET			 9
-+#define SSC_SR_ENDRX_SIZE			 1
-+#define SSC_SR_ENDRX_OFFSET			 6
-+#define SSC_SR_ENDTX_SIZE			 1
-+#define SSC_SR_ENDTX_OFFSET			 2
-+#define SSC_SR_OVRUN_SIZE			 1
-+#define SSC_SR_OVRUN_OFFSET			 5
-+#define SSC_SR_RXBUFF_SIZE			 1
-+#define SSC_SR_RXBUFF_OFFSET			 7
-+#define SSC_SR_RXEN_SIZE			 1
-+#define SSC_SR_RXEN_OFFSET			17
-+#define SSC_SR_RXRDY_SIZE			 1
-+#define SSC_SR_RXRDY_OFFSET			 4
-+#define SSC_SR_RXSYN_SIZE			 1
-+#define SSC_SR_RXSYN_OFFSET			11
-+#define SSC_SR_TXBUFE_SIZE			 1
-+#define SSC_SR_TXBUFE_OFFSET			 3
-+#define SSC_SR_TXEMPTY_SIZE			 1
-+#define SSC_SR_TXEMPTY_OFFSET			 1
-+#define SSC_SR_TXEN_SIZE			 1
-+#define SSC_SR_TXEN_OFFSET			16
-+#define SSC_SR_TXRDY_SIZE			 1
-+#define SSC_SR_TXRDY_OFFSET			 0
-+#define SSC_SR_TXSYN_SIZE			 1
-+#define SSC_SR_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Enable Register */
-+#define SSC_IER				0x00000044
-+#define SSC_IER_CP0_SIZE			 1
-+#define SSC_IER_CP0_OFFSET			 8
-+#define SSC_IER_CP1_SIZE			 1
-+#define SSC_IER_CP1_OFFSET			 9
-+#define SSC_IER_ENDRX_SIZE			 1
-+#define SSC_IER_ENDRX_OFFSET			 6
-+#define SSC_IER_ENDTX_SIZE			 1
-+#define SSC_IER_ENDTX_OFFSET			 2
-+#define SSC_IER_OVRUN_SIZE			 1
-+#define SSC_IER_OVRUN_OFFSET			 5
-+#define SSC_IER_RXBUFF_SIZE			 1
-+#define SSC_IER_RXBUFF_OFFSET			 7
-+#define SSC_IER_RXRDY_SIZE			 1
-+#define SSC_IER_RXRDY_OFFSET			 4
-+#define SSC_IER_RXSYN_SIZE			 1
-+#define SSC_IER_RXSYN_OFFSET			11
-+#define SSC_IER_TXBUFE_SIZE			 1
-+#define SSC_IER_TXBUFE_OFFSET			 3
-+#define SSC_IER_TXEMPTY_SIZE			 1
-+#define SSC_IER_TXEMPTY_OFFSET			 1
-+#define SSC_IER_TXRDY_SIZE			 1
-+#define SSC_IER_TXRDY_OFFSET			 0
-+#define SSC_IER_TXSYN_SIZE			 1
-+#define SSC_IER_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Disable Register */
-+#define SSC_IDR				0x00000048
-+#define SSC_IDR_CP0_SIZE			 1
-+#define SSC_IDR_CP0_OFFSET			 8
-+#define SSC_IDR_CP1_SIZE			 1
-+#define SSC_IDR_CP1_OFFSET			 9
-+#define SSC_IDR_ENDRX_SIZE			 1
-+#define SSC_IDR_ENDRX_OFFSET			 6
-+#define SSC_IDR_ENDTX_SIZE			 1
-+#define SSC_IDR_ENDTX_OFFSET			 2
-+#define SSC_IDR_OVRUN_SIZE			 1
-+#define SSC_IDR_OVRUN_OFFSET			 5
-+#define SSC_IDR_RXBUFF_SIZE			 1
-+#define SSC_IDR_RXBUFF_OFFSET			 7
-+#define SSC_IDR_RXRDY_SIZE			 1
-+#define SSC_IDR_RXRDY_OFFSET			 4
-+#define SSC_IDR_RXSYN_SIZE			 1
-+#define SSC_IDR_RXSYN_OFFSET			11
-+#define SSC_IDR_TXBUFE_SIZE			 1
-+#define SSC_IDR_TXBUFE_OFFSET			 3
-+#define SSC_IDR_TXEMPTY_SIZE			 1
-+#define SSC_IDR_TXEMPTY_OFFSET			 1
-+#define SSC_IDR_TXRDY_SIZE			 1
-+#define SSC_IDR_TXRDY_OFFSET			 0
-+#define SSC_IDR_TXSYN_SIZE			 1
-+#define SSC_IDR_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Mask Register */
-+#define SSC_IMR				0x0000004c
-+#define SSC_IMR_CP0_SIZE			 1
-+#define SSC_IMR_CP0_OFFSET			 8
-+#define SSC_IMR_CP1_SIZE			 1
-+#define SSC_IMR_CP1_OFFSET			 9
-+#define SSC_IMR_ENDRX_SIZE			 1
-+#define SSC_IMR_ENDRX_OFFSET			 6
-+#define SSC_IMR_ENDTX_SIZE			 1
-+#define SSC_IMR_ENDTX_OFFSET			 2
-+#define SSC_IMR_OVRUN_SIZE			 1
-+#define SSC_IMR_OVRUN_OFFSET			 5
-+#define SSC_IMR_RXBUFF_SIZE			 1
-+#define SSC_IMR_RXBUFF_OFFSET			 7
-+#define SSC_IMR_RXRDY_SIZE			 1
-+#define SSC_IMR_RXRDY_OFFSET			 4
-+#define SSC_IMR_RXSYN_SIZE			 1
-+#define SSC_IMR_RXSYN_OFFSET			11
-+#define SSC_IMR_TXBUFE_SIZE			 1
-+#define SSC_IMR_TXBUFE_OFFSET			 3
-+#define SSC_IMR_TXEMPTY_SIZE			 1
-+#define SSC_IMR_TXEMPTY_OFFSET			 1
-+#define SSC_IMR_TXRDY_SIZE			 1
-+#define SSC_IMR_TXRDY_OFFSET			 0
-+#define SSC_IMR_TXSYN_SIZE			 1
-+#define SSC_IMR_TXSYN_OFFSET			10
-+
-+/* SSC PDC Receive Pointer Register */
-+#define SSC_PDC_RPR			0x00000100
-+
-+/* SSC PDC Receive Counter Register */
-+#define SSC_PDC_RCR			0x00000104
-+
-+/* SSC PDC Transmit Pointer Register */
-+#define SSC_PDC_TPR			0x00000108
-+
-+/* SSC PDC Receive Next Pointer Register */
-+#define SSC_PDC_RNPR			0x00000110
-+
-+/* SSC PDC Receive Next Counter Register */
-+#define SSC_PDC_RNCR			0x00000114
-+
-+/* SSC PDC Transmit Counter Register */
-+#define SSC_PDC_TCR			0x0000010c
-+
-+/* SSC PDC Transmit Next Pointer Register */
-+#define SSC_PDC_TNPR			0x00000118
-+
-+/* SSC PDC Transmit Next Counter Register */
-+#define SSC_PDC_TNCR			0x0000011c
-+
-+/* SSC PDC Transfer Control Register */
-+#define SSC_PDC_PTCR			0x00000120
-+#define SSC_PDC_PTCR_RXTDIS_SIZE		 1
-+#define SSC_PDC_PTCR_RXTDIS_OFFSET		 1
-+#define SSC_PDC_PTCR_RXTEN_SIZE			 1
-+#define SSC_PDC_PTCR_RXTEN_OFFSET		 0
-+#define SSC_PDC_PTCR_TXTDIS_SIZE		 1
-+#define SSC_PDC_PTCR_TXTDIS_OFFSET		 9
-+#define SSC_PDC_PTCR_TXTEN_SIZE			 1
-+#define SSC_PDC_PTCR_TXTEN_OFFSET		 8
-+
-+/* SSC PDC Transfer Status Register */
-+#define SSC_PDC_PTSR			0x00000124
-+#define SSC_PDC_PTSR_RXTEN_SIZE			 1
-+#define SSC_PDC_PTSR_RXTEN_OFFSET		 0
-+#define SSC_PDC_PTSR_TXTEN_SIZE			 1
-+#define SSC_PDC_PTSR_TXTEN_OFFSET		 8
-+
-+/* Bit manipulation macros */
-+#define SSC_BIT(name)                          (1 << SSC_##name##_OFFSET)
-+#define SSC_BF(name,value)                     (((value) & ((1 << SSC_##name##_SIZE) - 1)) << SSC_##name##_OFFSET)
-+#define SSC_BFEXT(name,value)                  (((value) >> SSC_##name##_OFFSET) & ((1 << SSC_##name##_SIZE) - 1))
-+#define SSC_BFINS(name,value,old)              (((old) & ~(((1 << SSC_##name##_SIZE) - 1) << SSC_##name##_OFFSET)) | SSC_BF(name,value))
-+
-+/* Register access macros */
-+#define ssc_readl(port,reg)					\
-+	__raw_readl((port)->regs + SSC_##reg)
-+#define ssc_writel(port,reg,value)				\
-+	__raw_writel((value), (port)->regs + SSC_##reg)
-+
-+#endif /* __INCLUDE_ATMEL_SSC_H */
-diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h
-index c1d1629..5f38803 100644
---- a/include/pcmcia/cs_types.h
-+++ b/include/pcmcia/cs_types.h
-@@ -21,7 +21,7 @@
- #include <sys/types.h>
- #endif
- 
--#if defined(__arm__) || defined(__mips__)
-+#if defined(__arm__) || defined(__mips__) || defined(__avr32__)
- /* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
- typedef u_int   ioaddr_t;
- #else
-diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
-new file mode 100644
-index 0000000..4eea637
---- /dev/null
-+++ b/include/video/atmel_lcdc.h
-@@ -0,0 +1,196 @@
-+/*
-+ *  Header file for AT91/AT32 LCD Controller
-+ *
-+ *  Data structure and register user interface
-+ *
-+ *  Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#ifndef __ATMEL_LCDC_H__
-+#define __ATMEL_LCDC_H__
-+
-+ /* LCD Controller info data structure */
-+struct atmel_lcdfb_info {
-+	spinlock_t		lock;
-+	struct fb_info		*info;
-+	void __iomem		*mmio;
-+	unsigned long		irq_base;
-+
-+	unsigned int		guard_time;
-+	struct platform_device	*pdev;
-+	struct clk		*bus_clk;
-+	struct clk		*lcdc_clk;
-+	unsigned int		default_bpp;
-+	unsigned int		default_lcdcon2;
-+	unsigned int		default_dmacon;
-+	void (*atmel_lcdfb_power_control)(int on);
-+	struct fb_monspecs	*default_monspecs;
-+	u32			pseudo_palette[16];
-+};
-+
-+#define ATMEL_LCDC_DMABADDR1	0x00
-+#define ATMEL_LCDC_DMABADDR2	0x04
-+#define ATMEL_LCDC_DMAFRMPT1	0x08
-+#define ATMEL_LCDC_DMAFRMPT2	0x0c
-+#define ATMEL_LCDC_DMAFRMADD1	0x10
-+#define ATMEL_LCDC_DMAFRMADD2	0x14
-+
-+#define ATMEL_LCDC_DMAFRMCFG	0x18
-+#define	ATMEL_LCDC_FRSIZE	(0x7fffff <<  0)
-+#define	ATMEL_LCDC_BLENGTH_OFFSET	24
-+#define	ATMEL_LCDC_BLENGTH	(0x7f     << ATMEL_LCDC_BLENGTH_OFFSET)
-+
-+#define ATMEL_LCDC_DMACON	0x1c
-+#define	ATMEL_LCDC_DMAEN	(0x1 << 0)
-+#define	ATMEL_LCDC_DMARST	(0x1 << 1)
-+#define	ATMEL_LCDC_DMABUSY	(0x1 << 2)
-+#define		ATMEL_LCDC_DMAUPDT	(0x1 << 3)
-+#define		ATMEL_LCDC_DMA2DEN	(0x1 << 4)
-+
-+#define ATMEL_LCDC_DMA2DCFG	0x20
-+#define		ATMEL_LCDC_ADDRINC_OFFSET	0
-+#define		ATMEL_LCDC_ADDRINC		(0xffff)
-+#define		ATMEL_LCDC_PIXELOFF_OFFSET	24
-+#define		ATMEL_LCDC_PIXELOFF		(0x1f << 24)
-+
-+#define ATMEL_LCDC_LCDCON1	0x0800
-+#define	ATMEL_LCDC_BYPASS	(1     <<  0)
-+#define	ATMEL_LCDC_CLKVAL_OFFSET	12
-+#define	ATMEL_LCDC_CLKVAL	(0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
-+#define	ATMEL_LCDC_LINCNT	(0x7ff << 21)
-+
-+#define ATMEL_LCDC_LCDCON2	0x0804
-+#define	ATMEL_LCDC_DISTYPE	(3 << 0)
-+#define		ATMEL_LCDC_DISTYPE_STNMONO	(0 << 0)
-+#define		ATMEL_LCDC_DISTYPE_STNCOLOR	(1 << 0)
-+#define		ATMEL_LCDC_DISTYPE_TFT		(2 << 0)
-+#define	ATMEL_LCDC_SCANMOD	(1 << 2)
-+#define		ATMEL_LCDC_SCANMOD_SINGLE	(0 << 2)
-+#define		ATMEL_LCDC_SCANMOD_DUAL		(1 << 2)
-+#define	ATMEL_LCDC_IFWIDTH	(3 << 3)
-+#define		ATMEL_LCDC_IFWIDTH_4		(0 << 3)
-+#define		ATMEL_LCDC_IFWIDTH_8		(1 << 3)
-+#define		ATMEL_LCDC_IFWIDTH_16		(2 << 3)
-+#define	ATMEL_LCDC_PIXELSIZE	(7 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_1		(0 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_2		(1 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_4		(2 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_8		(3 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_16		(4 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_24		(5 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_32		(6 << 5)
-+#define	ATMEL_LCDC_INVVD	(1 << 8)
-+#define		ATMEL_LCDC_INVVD_NORMAL		(0 << 8)
-+#define		ATMEL_LCDC_INVVD_INVERTED	(1 << 8)
-+#define	ATMEL_LCDC_INVFRAME	(1 << 9 )
-+#define		ATMEL_LCDC_INVFRAME_NORMAL	(0 << 9)
-+#define		ATMEL_LCDC_INVFRAME_INVERTED	(1 << 9)
-+#define	ATMEL_LCDC_INVLINE	(1 << 10)
-+#define		ATMEL_LCDC_INVLINE_NORMAL	(0 << 10)
-+#define		ATMEL_LCDC_INVLINE_INVERTED	(1 << 10)
-+#define	ATMEL_LCDC_INVCLK	(1 << 11)
-+#define		ATMEL_LCDC_INVCLK_NORMAL	(0 << 11)
-+#define		ATMEL_LCDC_INVCLK_INVERTED	(1 << 11)
-+#define	ATMEL_LCDC_INVDVAL	(1 << 12)
-+#define		ATMEL_LCDC_INVDVAL_NORMAL	(0 << 12)
-+#define		ATMEL_LCDC_INVDVAL_INVERTED	(1 << 12)
-+#define	ATMEL_LCDC_CLKMOD	(1 << 15)
-+#define		ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
-+#define		ATMEL_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
-+#define	ATMEL_LCDC_MEMOR	(1 << 31)
-+#define		ATMEL_LCDC_MEMOR_BIG		(0 << 31)
-+#define		ATMEL_LCDC_MEMOR_LITTLE		(1 << 31)
-+
-+#define ATMEL_LCDC_TIM1		0x0808
-+#define	ATMEL_LCDC_VFP		(0xff <<  0)
-+#define	ATMEL_LCDC_VBP_OFFSET		8
-+#define	ATMEL_LCDC_VBP		(0xff <<  ATMEL_LCDC_VBP_OFFSET)
-+#define	ATMEL_LCDC_VPW_OFFSET		16
-+#define	ATMEL_LCDC_VPW		(0x3f << ATMEL_LCDC_VPW_OFFSET)
-+#define	ATMEL_LCDC_VHDLY_OFFSET		24
-+#define	ATMEL_LCDC_VHDLY	(0xf  << ATMEL_LCDC_VHDLY_OFFSET)
-+
-+#define ATMEL_LCDC_TIM2		0x080c
-+#define	ATMEL_LCDC_HBP		(0xff  <<  0)
-+#define	ATMEL_LCDC_HPW_OFFSET		8
-+#define	ATMEL_LCDC_HPW		(0x3f  <<  ATMEL_LCDC_HPW_OFFSET)
-+#define	ATMEL_LCDC_HFP_OFFSET		21
-+#define	ATMEL_LCDC_HFP		(0x7ff << ATMEL_LCDC_HFP_OFFSET)
-+
-+#define ATMEL_LCDC_LCDFRMCFG	0x0810
-+#define	ATMEL_LCDC_LINEVAL	(0x7ff <<  0)
-+#define	ATMEL_LCDC_HOZVAL_OFFSET	21
-+#define	ATMEL_LCDC_HOZVAL	(0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
-+
-+#define ATMEL_LCDC_FIFO		0x0814
-+#define	ATMEL_LCDC_FIFOTH	(0xffff)
-+
-+#define ATMEL_LCDC_MVAL		0x0818
-+
-+#define ATMEL_LCDC_DP1_2	0x081c
-+#define ATMEL_LCDC_DP4_7	0x0820
-+#define ATMEL_LCDC_DP3_5	0x0824
-+#define ATMEL_LCDC_DP2_3	0x0828
-+#define ATMEL_LCDC_DP5_7	0x082c
-+#define ATMEL_LCDC_DP3_4	0x0830
-+#define ATMEL_LCDC_DP4_5	0x0834
-+#define ATMEL_LCDC_DP6_7	0x0838
-+#define	ATMEL_LCDC_DP1_2_VAL	(0xff)
-+#define	ATMEL_LCDC_DP4_7_VAL	(0xfffffff)
-+#define	ATMEL_LCDC_DP3_5_VAL	(0xfffff)
-+#define	ATMEL_LCDC_DP2_3_VAL	(0xfff)
-+#define	ATMEL_LCDC_DP5_7_VAL	(0xfffffff)
-+#define	ATMEL_LCDC_DP3_4_VAL	(0xffff)
-+#define	ATMEL_LCDC_DP4_5_VAL	(0xfffff)
-+#define	ATMEL_LCDC_DP6_7_VAL	(0xfffffff)
-+
-+#define ATMEL_LCDC_PWRCON	0x083c
-+#define	ATMEL_LCDC_PWR		(1    <<  0)
-+#define	ATMEL_LCDC_GUARDT_OFFSET	1
-+#define	ATMEL_LCDC_GUARDT	(0x7f <<  ATMEL_LCDC_GUARDT_OFFSET)
-+#define	ATMEL_LCDC_BUSY		(1    << 31)
-+
-+#define ATMEL_LCDC_CONTRAST_CTR	0x0840
-+#define	ATMEL_LCDC_PS		(3 << 0)
-+#define		ATMEL_LCDC_PS_DIV1		(0 << 0)
-+#define		ATMEL_LCDC_PS_DIV2		(1 << 0)
-+#define		ATMEL_LCDC_PS_DIV4		(2 << 0)
-+#define		ATMEL_LCDC_PS_DIV8		(3 << 0)
-+#define	ATMEL_LCDC_POL		(1 << 2)
-+#define		ATMEL_LCDC_POL_NEGATIVE		(0 << 2)
-+#define		ATMEL_LCDC_POL_POSITIVE		(1 << 2)
-+#define	ATMEL_LCDC_ENA		(1 << 3)
-+#define		ATMEL_LCDC_ENA_PWMDISABLE	(0 << 3)
-+#define		ATMEL_LCDC_ENA_PWMENABLE	(1 << 3)
-+
-+#define ATMEL_LCDC_CONTRAST_VAL	0x0844
-+#define	ATMEL_LCDC_CVAL	(0xff)
-+
-+#define ATMEL_LCDC_IER		0x0848
-+#define ATMEL_LCDC_IDR		0x084c
-+#define ATMEL_LCDC_IMR		0x0850
-+#define ATMEL_LCDC_ISR		0x0854
-+#define ATMEL_LCDC_ICR		0x0858
-+#define	ATMEL_LCDC_LNI		(1 << 0)
-+#define	ATMEL_LCDC_LSTLNI	(1 << 1)
-+#define	ATMEL_LCDC_EOFI		(1 << 2)
-+#define	ATMEL_LCDC_UFLWI	(1 << 4)
-+#define	ATMEL_LCDC_OWRI		(1 << 5)
-+#define	ATMEL_LCDC_MERI		(1 << 6)
-+
-+#define ATMEL_LCDC_LUT(n)	(0x0c00 + ((n)*4))
-+
-+#endif /* __ATMEL_LCDC_H__ */
-diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
-index f7844f6..6631586 100755
---- a/scripts/checkstack.pl
-+++ b/scripts/checkstack.pl
-@@ -12,6 +12,7 @@
- #	sh64 port by Paul Mundt
- #	Random bits by Matt Mackall <mpm@selenic.com>
- #	M68k port by Geert Uytterhoeven and Andreas Schwab
-+#	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
- #
- #	Usage:
- #	objdump -d vmlinux | stackcheck.pl [arch]
-@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
- 	if ($arch eq 'arm') {
- 		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
- 		$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
-+	} elsif ($arch eq 'avr32') {
-+		#8000008a:       20 1d           sub sp,4
-+		#80000ca8:       fa cd 05 b0     sub sp,sp,1456
-+		$re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
- 	} elsif ($arch =~ /^i[3456]86$/) {
- 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
- 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
-diff --git a/sound/Kconfig b/sound/Kconfig
-index 97532bb..2bad674 100644
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -62,9 +62,13 @@ source "sound/aoa/Kconfig"
- 
- source "sound/arm/Kconfig"
- 
-+source "sound/spi/Kconfig"
-+
-+source "sound/avr32/Kconfig"
-+
- source "sound/mips/Kconfig"
- 
--# the following will depend on the order of config.
-+# tee following will depend on the order of config.
- # here assuming USB is defined before ALSA
- source "sound/usb/Kconfig"
- 
-diff --git a/sound/Makefile b/sound/Makefile
-index b7c7fb7..fda6893 100644
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
- obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
--obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
-+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ avr32/ synth/ usb/ \
-+		      sparc/ spi/ parisc/ pcmcia/ mips/ soc/
- obj-$(CONFIG_SND_AOA) += aoa/
- 
- # This one must be compilable even if sound is configured out
-diff --git a/sound/avr32/Kconfig b/sound/avr32/Kconfig
-new file mode 100644
-index 0000000..adfe779
---- /dev/null
-+++ b/sound/avr32/Kconfig
-@@ -0,0 +1,12 @@
-+menu "AVR32 devices"
-+	depends on SND != n && AVR32
-+
-+config SND_ATMEL_AC97
-+	tristate "Atmel AC97 Controller Driver"
-+	depends on SND
-+	select SND_PCM
-+	select SND_AC97_CODEC
-+	help
-+	  ALSA sound driver for the Atmel AC97 controller.
-+
-+endmenu
-diff --git a/sound/avr32/Makefile b/sound/avr32/Makefile
-new file mode 100644
-index 0000000..fd864b7
---- /dev/null
-+++ b/sound/avr32/Makefile
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for ALSA
-+#
-+
-+snd-atmel-ac97-objs		:= ac97c.o
-+obj-$(CONFIG_SND_ATMEL_AC97)	+= snd-atmel-ac97.o
-diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c
-new file mode 100644
-index 0000000..32f6639
---- /dev/null
-+++ b/sound/avr32/ac97c.c
-@@ -0,0 +1,880 @@
-+/*
-+ * Driver for the Atmel AC97 Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/initval.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/memalloc.h>
-+
-+#include <asm/io.h>
-+#include <asm/dma-controller.h>
-+
-+#include "ac97c.h"
-+
-+/*
-+ * Module parameters
-+ */
-+static char *id;
-+module_param(id, charp, 0444);
-+MODULE_PARM_DESC(id, "ID string for Atmel AC97 controller");
-+
-+static DEFINE_MUTEX(opened_mutex);
-+
-+struct atmel_ac97_dma_info {
-+	struct dma_request_cyclic req_tx;
-+	struct dma_request_cyclic req_rx;
-+	unsigned short rx_periph_id;
-+	unsigned short tx_periph_id;
-+};
-+
-+typedef struct atmel_ac97 {
-+	spinlock_t lock;
-+	void __iomem *regs;
-+	struct snd_pcm_substream *playback_substream;
-+	struct snd_pcm_substream *capture_substream;
-+	struct snd_card *card;
-+	struct snd_pcm *pcm;
-+	struct snd_ac97 *ac97;
-+	struct snd_ac97_bus *ac97_bus;
-+	int opened;
-+	int period;
-+	u64 cur_format;
-+	unsigned int cur_rate;
-+	struct clk *mck;
-+	struct platform_device *pdev;
-+        struct atmel_ac97_dma_info dma;
-+} atmel_ac97_t;
-+#define get_chip(card) ((atmel_ac97_t *)(card)->private_data)
-+
-+#define ac97c_writel(chip, reg, val)			\
-+	__raw_writel((val), (chip)->regs + AC97C_##reg)
-+#define ac97c_readl(chip, reg)				\
-+	__raw_readl((chip)->regs + AC97C_##reg)
-+
-+/*
-+ * PCM part
-+ */
-+static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
-+	.info			= (SNDRV_PCM_INFO_INTERLEAVED
-+				  |SNDRV_PCM_INFO_MMAP
-+				  |SNDRV_PCM_INFO_MMAP_VALID
-+				  |SNDRV_PCM_INFO_BLOCK_TRANSFER
-+				  |SNDRV_PCM_INFO_JOINT_DUPLEX),
-+	.formats		= (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
-+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
-+	.rate_min		= 4000,
-+	.rate_max		= 48000,
-+	.channels_min		= 1,
-+	.channels_max		= 6,
-+	.buffer_bytes_max	= 64*1024,
-+	.period_bytes_min	= 512,
-+	.period_bytes_max	= 4095,
-+	.periods_min		= 8,
-+	.periods_max		= 1024,
-+};
-+
-+static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
-+	.info			= (SNDRV_PCM_INFO_INTERLEAVED
-+				  |SNDRV_PCM_INFO_MMAP
-+				  |SNDRV_PCM_INFO_MMAP_VALID
-+				  |SNDRV_PCM_INFO_BLOCK_TRANSFER
-+				  |SNDRV_PCM_INFO_JOINT_DUPLEX),
-+	.formats		= (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
-+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
-+	.rate_min		= 4000,
-+	.rate_max		= 48000,
-+	.channels_min		= 1,
-+	.channels_max		= 2,
-+	.buffer_bytes_max	= 64*1024,
-+	.period_bytes_min	= 512,
-+	.period_bytes_max	= 4095,
-+	.periods_min		= 8,
-+	.periods_max		= 1024,
-+};
-+
-+/* Joint full duplex variables */
-+unsigned int hw_rates[1];
-+unsigned int hw_formats[1];
-+struct snd_pcm_hw_constraint_list hw_constraint_rates;
-+struct snd_pcm_hw_constraint_list hw_constraint_formats;
-+
-+/*
-+ * PCM functions
-+ */
-+static int
-+snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+	mutex_lock(&opened_mutex);
-+	chip->opened++;
-+	runtime->hw = snd_atmel_ac97_playback_hw;
-+	if (chip->cur_rate) {
-+		runtime->hw.rate_min = chip->cur_rate;
-+		runtime->hw.rate_max = chip->cur_rate;
-+	}
-+	if (chip->cur_format)
-+		runtime->hw.formats = (1ULL<<chip->cur_format);
-+	mutex_unlock(&opened_mutex);
-+	chip->playback_substream = substream;
-+	chip->period = 0;
-+	return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+	mutex_lock(&opened_mutex);
-+	chip->opened++;
-+	runtime->hw = snd_atmel_ac97_capture_hw;
-+	if (chip->cur_rate) {
-+		runtime->hw.rate_min = chip->cur_rate;
-+		runtime->hw.rate_max = chip->cur_rate;
-+	}
-+	if (chip->cur_format)
-+		runtime->hw.formats = (1ULL<<chip->cur_format);
-+	mutex_unlock(&opened_mutex);
-+	chip->capture_substream = substream;
-+	chip->period = 0;
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	mutex_lock(&opened_mutex);
-+	chip->opened--;
-+	if (!chip->opened) {
-+		chip->cur_rate = 0;
-+		chip->cur_format = 0;
-+	}
-+	mutex_unlock(&opened_mutex);
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	mutex_lock(&opened_mutex);
-+	chip->opened--;
-+	if (!chip->opened) {
-+		chip->cur_rate = 0;
-+		chip->cur_format = 0;
-+	}
-+	mutex_unlock(&opened_mutex);
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
-+				    struct snd_pcm_hw_params *hw_params)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	int err;
-+
-+	err = snd_pcm_lib_malloc_pages(substream,
-+					params_buffer_bytes(hw_params));
-+	if (err < 0)
-+		return err;
-+
-+	/* Set restrictions to params */
-+	mutex_lock(&opened_mutex);
-+	chip->cur_rate = params_rate(hw_params);
-+	chip->cur_format = params_format(hw_params);
-+	mutex_unlock(&opened_mutex);
-+
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
-+				    struct snd_pcm_hw_params *hw_params)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	int err;
-+
-+	err = snd_pcm_lib_malloc_pages(substream,
-+					params_buffer_bytes(hw_params));
-+	if (err < 0)
-+		return err;
-+
-+	/* Set restrictions to params */
-+	mutex_lock(&opened_mutex);
-+	chip->cur_rate = params_rate(hw_params);
-+	chip->cur_format = params_format(hw_params);
-+	mutex_unlock(&opened_mutex);
-+
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
-+{
-+	return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
-+{
-+
-+	return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	struct platform_device *pdev = chip->pdev;
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	int block_size = frames_to_bytes(runtime, runtime->period_size);
-+	unsigned long word = 0;
-+	unsigned long buffer_size = 0;
-+
-+	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+			block_size * 2, DMA_TO_DEVICE);
-+
-+	/* Assign slots to channels */
-+	switch (substream->runtime->channels) {
-+        case 1:
-+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+		break;
-+	case 2:
-+		/* Assign Left and Right slot to Channel A */
-+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+		break;
-+        default:
-+		/* TODO: support more than two channels */
-+		return -EINVAL;
-+		break;
-+	}
-+	ac97c_writel(chip, OCA, word);
-+
-+	/* Configure sample format and size */
-+        word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+        switch (runtime->format){
-+        case SNDRV_PCM_FORMAT_S16_LE:
-+		word |= AC97C_CMR_CEM_LITTLE;
-+		break;
-+        case SNDRV_PCM_FORMAT_S16_BE:
-+        default:
-+		word &= ~AC97C_CMR_CEM_LITTLE;
-+		break;
-+        }
-+
-+	ac97c_writel(chip, CAMR, word);
-+
-+        /* Set variable rate if needed */
-+        if (runtime->rate != 48000) {
-+		word = ac97c_readl(chip, MR);
-+		word |= AC97C_MR_VRA;
-+		ac97c_writel(chip, MR, word);
-+        } else {
-+		/* Clear Variable Rate Bit */
-+		word = ac97c_readl(chip, MR);
-+		word &= ~AC97C_MR_VRA;
-+		ac97c_writel(chip, MR, word);
-+        }
-+
-+        /* Set rate */
-+        snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
-+
-+	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+		runtime->periods;
-+
-+	chip->dma.req_tx.buffer_size = buffer_size;
-+        chip->dma.req_tx.periods = runtime->periods;
-+
-+	BUG_ON(chip->dma.req_tx.buffer_size !=
-+			(chip->dma.req_tx.periods *
-+			 frames_to_bytes(runtime, runtime->period_size)));
-+
-+        chip->dma.req_tx.buffer_start = runtime->dma_addr;
-+        chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
-+        chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
-+        chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
-+        chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+        chip->dma.req_tx.dev_id = chip;
-+
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	struct platform_device *pdev = chip->pdev;
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	int block_size = frames_to_bytes(runtime, runtime->period_size);
-+	unsigned long word = 0;
-+	unsigned long buffer_size = 0;
-+
-+	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+			block_size * 2, DMA_FROM_DEVICE);
-+
-+	/* Assign slots to channels */
-+	switch (substream->runtime->channels) {
-+        case 1:
-+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+		break;
-+        case 2:
-+		/* Assign Left and Right slot to Channel A */
-+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+		break;
-+	default:
-+		/* TODO: support more than two channels */
-+		return -EINVAL;
-+		break;
-+	}
-+	ac97c_writel(chip, ICA, word);
-+
-+	/* Configure sample format and size */
-+        word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+	switch (runtime->format) {
-+	case SNDRV_PCM_FORMAT_S16_LE:
-+		word |= AC97C_CMR_CEM_LITTLE;
-+		break;
-+	case SNDRV_PCM_FORMAT_S16_BE:
-+	default:
-+		word &= ~(AC97C_CMR_CEM_LITTLE);
-+		break;
-+	}
-+
-+	ac97c_writel(chip, CAMR, word);
-+
-+	/* Set variable rate if needed */
-+	if (runtime->rate != 48000) {
-+		word = ac97c_readl(chip, MR);
-+		word |= AC97C_MR_VRA;
-+		ac97c_writel(chip, MR, word);
-+	} else {
-+		/* Clear Variable Rate Bit */
-+		word = ac97c_readl(chip, MR);
-+		word &= ~(AC97C_MR_VRA);
-+		ac97c_writel(chip, MR, word);
-+	}
-+
-+	/* Set rate */
-+	snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
-+
-+	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+		runtime->periods;
-+
-+	chip->dma.req_rx.buffer_size = buffer_size;
-+	chip->dma.req_rx.periods = runtime->periods;
-+
-+	BUG_ON(chip->dma.req_rx.buffer_size !=
-+			(chip->dma.req_rx.periods *
-+			 frames_to_bytes(runtime, runtime->period_size)));
-+
-+	chip->dma.req_rx.buffer_start = runtime->dma_addr;
-+	chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
-+	chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
-+	chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
-+	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+	chip->dma.req_rx.dev_id = chip;
-+
-+	return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	unsigned long camr;
-+	int flags, err = 0;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+	camr = ac97c_readl(chip, CAMR);
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_START:
-+		err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
-+				&chip->dma.req_tx);
-+		dma_start_request(chip->dma.req_tx.req.dmac,
-+				chip->dma.req_tx.req.channel);
-+		camr |= AC97C_CMR_CENA;
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+		err = dma_stop_request(chip->dma.req_tx.req.dmac,
-+				chip->dma.req_tx.req.channel);
-+		if (chip->opened <= 1)
-+			camr &= ~AC97C_CMR_CENA;
-+		break;
-+	default:
-+		err = -EINVAL;
-+		break;
-+	}
-+
-+	ac97c_writel(chip, CAMR, camr);
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+	return err;
-+}
-+
-+static int snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	unsigned long camr;
-+	int flags, err = 0;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+	camr = ac97c_readl(chip, CAMR);
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_START:
-+		err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
-+				&chip->dma.req_rx);
-+		dma_start_request(chip->dma.req_rx.req.dmac,
-+				chip->dma.req_rx.req.channel);
-+		camr |= AC97C_CMR_CENA;
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+		err = dma_stop_request(chip->dma.req_rx.req.dmac,
-+				chip->dma.req_rx.req.channel);
-+		mutex_lock(&opened_mutex);
-+		if (chip->opened <= 1)
-+			camr &= ~AC97C_CMR_CENA;
-+		mutex_unlock(&opened_mutex);
-+		break;
-+	default:
-+		err = -EINVAL;
-+		break;
-+	}
-+
-+	ac97c_writel(chip, CAMR, camr);
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+	return err;
-+}
-+
-+static snd_pcm_uframes_t snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	snd_pcm_uframes_t pos;
-+	unsigned long bytes;
-+
-+        bytes = (dma_get_current_pos
-+			(chip->dma.req_tx.req.dmac,
-+			 chip->dma.req_tx.req.channel) - runtime->dma_addr);
-+	pos = bytes_to_frames(runtime, bytes);
-+	if (pos >= runtime->buffer_size)
-+		pos -= runtime->buffer_size;
-+
-+	return pos;
-+}
-+
-+static snd_pcm_uframes_t snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
-+{
-+	atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	snd_pcm_uframes_t pos;
-+	unsigned long bytes;
-+
-+        bytes = (dma_get_current_pos
-+			(chip->dma.req_rx.req.dmac,chip->dma.req_rx.req.channel) -
-+			runtime->dma_addr);
-+	pos = bytes_to_frames(runtime, bytes);
-+	if (pos >= runtime->buffer_size)
-+		pos -= runtime->buffer_size;
-+
-+
-+	return pos;
-+}
-+
-+static struct snd_pcm_ops atmel_ac97_playback_ops = {
-+	.open		= snd_atmel_ac97_playback_open,
-+	.close		= snd_atmel_ac97_playback_close,
-+	.ioctl		= snd_pcm_lib_ioctl,
-+	.hw_params	= snd_atmel_ac97_playback_hw_params,
-+	.hw_free	= snd_atmel_ac97_playback_hw_free,
-+	.prepare	= snd_atmel_ac97_playback_prepare,
-+	.trigger	= snd_atmel_ac97_playback_trigger,
-+	.pointer	= snd_atmel_ac97_playback_pointer,
-+};
-+
-+static struct snd_pcm_ops atmel_ac97_capture_ops = {
-+	.open		= snd_atmel_ac97_capture_open,
-+	.close		= snd_atmel_ac97_capture_close,
-+	.ioctl		= snd_pcm_lib_ioctl,
-+	.hw_params	= snd_atmel_ac97_capture_hw_params,
-+	.hw_free	= snd_atmel_ac97_capture_hw_free,
-+	.prepare	= snd_atmel_ac97_capture_prepare,
-+	.trigger	= snd_atmel_ac97_capture_trigger,
-+	.pointer	= snd_atmel_ac97_capture_pointer,
-+};
-+
-+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
-+	/* Playback */
-+	{
-+		.exclusive = 1,
-+		.r = { {
-+			.slots = ((1 << AC97_SLOT_PCM_LEFT)
-+					| (1 << AC97_SLOT_PCM_RIGHT)
-+					| (1 << AC97_SLOT_PCM_CENTER)
-+					| (1 << AC97_SLOT_PCM_SLEFT)
-+					| (1 << AC97_SLOT_PCM_SRIGHT)
-+					| (1 << AC97_SLOT_LFE)),
-+		} }
-+	},
-+	/* PCM in */
-+	{
-+		.stream = 1,
-+		.exclusive = 1,
-+		.r = { {
-+			.slots = ((1 << AC97_SLOT_PCM_LEFT)
-+					| (1 << AC97_SLOT_PCM_RIGHT)),
-+		} }
-+	},
-+	/* Mic in */
-+	{
-+		.stream = 1,
-+		.exclusive = 1,
-+		.r = { {
-+			.slots = (1<<AC97_SLOT_MIC),
-+		} }
-+	},
-+};
-+
-+static int __devinit snd_atmel_ac97_pcm_new(atmel_ac97_t *chip)
-+{
-+	struct snd_pcm *pcm;
-+	int err;
-+
-+	err = snd_ac97_pcm_assign(chip->ac97_bus,
-+			ARRAY_SIZE(atmel_ac97_pcm_defs),
-+			atmel_ac97_pcm_defs);
-+	if (err)
-+		return err;
-+
-+	err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
-+	if (err)
-+		return err;
-+
-+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
-+			&atmel_ac97_playback_ops);
-+
-+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
-+			&atmel_ac97_capture_ops);
-+
-+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
-+					      &chip->pdev->dev,
-+					      128 * 1024, 128 * 1024);
-+
-+	pcm->private_data = chip;
-+	pcm->info_flags = 0;
-+	strcpy(pcm->name, "Atmel-AC97");
-+	chip->pcm = pcm;
-+
-+	return 0;
-+}
-+
-+/* Mixer part */
-+static int snd_atmel_ac97_mixer_new(atmel_ac97_t *chip)
-+{
-+	int err;
-+	struct snd_ac97_template template;
-+
-+	memset(&template, 0, sizeof(template));
-+	template.private_data = chip;
-+	err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
-+
-+	return err;
-+}
-+
-+static void atmel_ac97_error(struct dma_request *_req)
-+{
-+	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+
-+	printk(KERN_WARNING
-+	       "DMA Controller error, channel %d (AC97C)\n",
-+	       req->req.channel);
-+}
-+
-+static void atmel_ac97_block_complete(struct dma_request *_req)
-+{
-+	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+	atmel_ac97_t *chip = req->dev_id;
-+	if (req->periph_id == chip->dma.tx_periph_id)
-+		snd_pcm_period_elapsed(chip->playback_substream);
-+	else
-+		snd_pcm_period_elapsed(chip->capture_substream);
-+}
-+
-+/*
-+ * Codec part
-+ */
-+static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
-+				 unsigned short val)
-+{
-+	atmel_ac97_t *chip = get_chip(ac97);
-+	unsigned long word;
-+	int timeout = 40;
-+
-+	word = (reg & 0x7f) << 16 | val;
-+
-+	do {
-+		if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
-+			ac97c_writel(chip, COTHR, word);
-+			return;
-+		}
-+		udelay(1);
-+	} while (--timeout);
-+
-+	snd_printk(KERN_WARNING "atmel-ac97: codec write timeout\n");
-+}
-+
-+static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
-+					  unsigned short reg)
-+{
-+	atmel_ac97_t *chip = get_chip(ac97);
-+	unsigned long word;
-+	int timeout = 40;
-+	int write = 10;
-+
-+	word = (0x80 | (reg & 0x7f)) << 16;
-+
-+	if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
-+		ac97c_readl(chip, CORHR);
-+
-+retry_write:
-+	timeout = 40;
-+
-+	do {
-+                if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
-+			ac97c_writel(chip, COTHR, word);
-+			goto read_reg;
-+                }
-+		mdelay(10);
-+	} while (--timeout);
-+
-+	if (!--write)
-+		goto timed_out;
-+	goto retry_write;
-+
-+read_reg:
-+	do {
-+		if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0){
-+			unsigned short val = ac97c_readl(chip, CORHR);
-+			return val;
-+		}
-+		mdelay(10);
-+	} while (--timeout);
-+
-+	if (!--write)
-+		goto timed_out;
-+	goto retry_write;
-+
-+timed_out:
-+	snd_printk(KERN_INFO "atmel-ac97: codec read timeout\n");
-+	return 0xffff;
-+}
-+
-+static void snd_atmel_ac97_reset(atmel_ac97_t *chip)
-+{
-+	/* TODO: Perform hard reset of codec as well */
-+	ac97c_writel(chip, MR, AC97C_MR_WRST);
-+	mdelay(1);
-+	ac97c_writel(chip, MR, AC97C_MR_ENA);
-+}
-+
-+static void snd_atmel_ac97_destroy(struct snd_card *card)
-+{
-+	atmel_ac97_t *chip = get_chip(card);
-+
-+	if (chip->regs)
-+		iounmap(chip->regs);
-+
-+	if (chip->mck) {
-+		clk_disable(chip->mck);
-+		clk_put(chip->mck);
-+	}
-+
-+        if (chip->dma.req_tx.req.dmac){
-+		dma_release_channel(chip->dma.req_tx.req.dmac,
-+				    chip->dma.req_tx.req.channel);
-+        }
-+        if (chip->dma.req_rx.req.dmac) {
-+		dma_release_channel(chip->dma.req_rx.req.dmac,
-+				    chip->dma.req_rx.req.channel);
-+        }
-+}
-+
-+static int __devinit snd_atmel_ac97_create(struct snd_card *card,
-+					   struct platform_device *pdev)
-+{
-+	static struct snd_ac97_bus_ops ops = {
-+		.write	= snd_atmel_ac97_write,
-+		.read	= snd_atmel_ac97_read,
-+	};
-+	atmel_ac97_t *chip = get_chip(card);
-+	struct resource *regs;
-+	struct clk *mck;
-+        int err;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+
-+	mck = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(mck))
-+		return PTR_ERR(mck);
-+	clk_enable(mck);
-+	chip->mck = mck;
-+
-+	card->private_free = snd_atmel_ac97_destroy;
-+
-+	spin_lock_init(&chip->lock);
-+	chip->card = card;
-+	chip->pdev = pdev;
-+
-+	chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!chip->regs)
-+		return -ENOMEM;
-+
-+	snd_card_set_dev(card, &pdev->dev);
-+
-+	err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
-+
-+	return err;
-+}
-+
-+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
-+{
-+	static int dev;
-+	struct snd_card *card;
-+	atmel_ac97_t *chip;
-+	int err;
-+        int ch;
-+
-+	mutex_init(&opened_mutex);
-+
-+	err = -ENOMEM;
-+	card = snd_card_new(-1, id, THIS_MODULE, sizeof(atmel_ac97_t));
-+	if (!card)
-+		goto out;
-+	chip = get_chip(card);
-+
-+	err = snd_atmel_ac97_create(card, pdev);
-+	if (err)
-+		goto out_free_card;
-+
-+	snd_atmel_ac97_reset(chip);
-+
-+	err = snd_atmel_ac97_mixer_new(chip);
-+	if (err)
-+		goto out_free_card;
-+
-+	err = snd_atmel_ac97_pcm_new(chip);
-+	if (err)
-+		goto out_free_card;
-+
-+	/* TODO: Get this information from the platform device */
-+	chip->dma.req_tx.req.dmac = find_dma_controller(0);
-+	if (!chip->dma.req_tx.req.dmac) {
-+		printk(KERN_ERR
-+		       "atmel-ac97c: No DMA controller for TX, aborting\n");
-+		goto out_free_card;
-+	}
-+	chip->dma.req_rx.req.dmac = find_dma_controller(0);
-+	if (!chip->dma.req_rx.req.dmac) {
-+		snd_printk(KERN_ERR
-+		       "atmel-ac97c: No DMA controller available for RX, aborting\n");
-+		goto out_free_card;
-+	}
-+
-+	chip->dma.rx_periph_id = 3;
-+	chip->dma.tx_periph_id = 4;
-+
-+	ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
-+	if (ch < 0) {
-+		printk(KERN_ERR
-+		       "atmel-ac97c: Unable to allocate TX DMA channel, aborting\n");
-+		goto out_free_card;
-+	}
-+	chip->dma.req_tx.req.channel = ch;
-+	chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+	chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
-+	chip->dma.req_tx.req.error = atmel_ac97_error;
-+
-+	ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
-+	if (ch < 0) {
-+		snd_printk(KERN_ERR
-+		       "atmel-ac97c: Unable to allocate RX DMA channel, aborting\n");
-+		goto out_free_card;
-+	}
-+	chip->dma.req_rx.req.channel = ch;
-+	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+	chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
-+	chip->dma.req_rx.req.error = atmel_ac97_error;
-+
-+	strcpy(card->driver, "ac97c");
-+	strcpy(card->shortname, "Atmel-AC97");
-+	sprintf(card->longname, "Atmel AVR32 AC97 Controller at 0x%p, dma rx %i and tx %i",
-+		chip->regs, chip->dma.rx_periph_id, chip->dma.tx_periph_id);
-+
-+	err = snd_card_register(card);
-+	if (err)
-+		goto out_free_card;
-+
-+	platform_set_drvdata(pdev, card);
-+	dev++;
-+	return 0;
-+
-+out_free_card:
-+	snd_card_free(card);
-+out:
-+	return err;
-+}
-+
-+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
-+{
-+	struct snd_card *card = platform_get_drvdata(pdev);
-+
-+	snd_card_free(card);
-+	platform_set_drvdata(pdev, NULL);
-+	return 0;
-+}
-+
-+static struct platform_driver atmel_ac97_driver = {
-+	.remove		= __devexit_p(snd_atmel_ac97_remove),
-+	.driver		= {
-+		.name	= "atmel_ac97c",
-+	},
-+};
-+
-+static int __init atmel_ac97_init(void)
-+{
-+	return platform_driver_probe(&atmel_ac97_driver, snd_atmel_ac97_probe);
-+}
-+
-+static void __exit atmel_ac97_exit(void)
-+{
-+	platform_driver_unregister(&atmel_ac97_driver);
-+}
-+
-+module_init(atmel_ac97_init);
-+module_exit(atmel_ac97_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-diff --git a/sound/avr32/ac97c.h b/sound/avr32/ac97c.h
-new file mode 100644
-index 0000000..96246e7
---- /dev/null
-+++ b/sound/avr32/ac97c.h
-@@ -0,0 +1,71 @@
-+/*
-+ * Register definitions for the Atmel AC97 Controller.
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __SOUND_AVR32_AC97C_H
-+#define __SOUND_AVR32_AC97C_H
-+
-+#define AC97C_MR		0x08
-+#define AC97C_ICA		0x10
-+#define AC97C_OCA		0x14
-+#define AC97C_CARHR		0x20
-+#define AC97C_CATHR		0x24
-+#define AC97C_CASR		0x28
-+#define AC97C_CAMR		0x2c
-+#define AC97C_CBRHR		0x30
-+#define AC97C_CBTHR		0x34
-+#define AC97C_CBSR		0x38
-+#define AC97C_CBMR		0x3c
-+#define AC97C_CORHR		0x40
-+#define AC97C_COTHR		0x44
-+#define AC97C_COSR		0x48
-+#define AC97C_COMR		0x4c
-+#define AC97C_SR		0x50
-+#define AC97C_IER		0x54
-+#define AC97C_IDR		0x58
-+#define AC97C_IMR		0x5c
-+#define AC97C_VERSION		0xfc
-+
-+#define AC97C_CATPR		PDC_TPR
-+#define AC97C_CATCR		PDC_TCR
-+#define AC97C_CATNPR		PDC_TNPR
-+#define AC97C_CATNCR		PDC_TNCR
-+#define AC97C_CARPR		PDC_RPR
-+#define AC97C_CARCR		PDC_RCR
-+#define AC97C_CARNPR		PDC_RNPR
-+#define AC97C_CARNCR		PDC_RNCR
-+#define AC97C_PTCR		PDC_PTCR
-+
-+#define AC97C_MR_ENA		(1 << 0)
-+#define AC97C_MR_WRST		(1 << 1)
-+#define AC97C_MR_VRA		(1 << 2)
-+
-+#define AC97C_CSR_TXRDY		(1 << 0)
-+#define AC97C_CSR_UNRUN		(1 << 2)
-+#define AC97C_CSR_RXRDY		(1 << 4)
-+#define AC97C_CSR_ENDTX		(1 << 10)
-+#define AC97C_CSR_ENDRX		(1 << 14)
-+
-+#define AC97C_CMR_SIZE_20	(0 << 16)
-+#define AC97C_CMR_SIZE_18	(1 << 16)
-+#define AC97C_CMR_SIZE_16	(2 << 16)
-+#define AC97C_CMR_SIZE_10	(3 << 16)
-+#define AC97C_CMR_CEM_LITTLE	(1 << 18)
-+#define AC97C_CMR_CEM_BIG	(0 << 18)
-+#define AC97C_CMR_CENA		(1 << 21)
-+#define AC97C_CMR_PDCEN		(1 << 22)
-+
-+#define AC97C_SR_CAEVT		(1 << 3)
-+
-+#define AC97C_CH_ASSIGN(slot, channel)					\
-+	(AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
-+#define AC97C_CHANNEL_NONE	0x0
-+#define AC97C_CHANNEL_A		0x1
-+#define AC97C_CHANNEL_B		0x2
-+
-+#endif /* __SOUND_AVR32_AC97C_H */
-diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
-new file mode 100644
-index 0000000..6814353
---- /dev/null
-+++ b/sound/spi/Kconfig
-@@ -0,0 +1,31 @@
-+#SPI drivers
-+
-+menu "SPI devices"
-+	depends on SND != n
-+
-+config SND_AT73C213
-+	tristate "Atmel AT73C213 DAC driver"
-+	depends on ATMEL_SSC
-+	select SND_PCM
-+	help
-+	  Say Y here if you want to use the Atmel AT73C213 DAC. This device can
-+	  be found on several development boards for AT91 and AVR32.
-+
-+	  This driver requires the Atmel SSC driver for sound sink, a
-+	  peripheral found on most AT91 and AVR32 microprocessors.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called snd-at73c213.
-+
-+config SND_AT73C213_TARGET_BITRATE
-+	int "Target bitrate for AT73C213"
-+	depends on SND_AT73C213
-+	default "48000"
-+	range 8000 50000
-+	help
-+	  Sets the target bitrate for the bitrate calculator in the driver.
-+	  Limited by hardware to be between 8000 Hz and 50000 Hz.
-+
-+	  Set to 48000 Hz by default.
-+
-+endmenu
-diff --git a/sound/spi/Makefile b/sound/spi/Makefile
-new file mode 100644
-index 0000000..026fb73
---- /dev/null
-+++ b/sound/spi/Makefile
-@@ -0,0 +1,5 @@
-+# Makefile for SPI drivers
-+
-+snd-at73c213-objs		:= at73c213.o
-+
-+obj-$(CONFIG_SND_AT73C213)	+= snd-at73c213.o
-diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
-new file mode 100644
-index 0000000..f94e417
---- /dev/null
-+++ b/sound/spi/at73c213.c
-@@ -0,0 +1,1123 @@
-+/*
-+ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
-+ *
-+ * Copyright (C) 2006 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+
-+/*#define DEBUG*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kmod.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <sound/initval.h>
-+#include <sound/driver.h>
-+#include <sound/control.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+
-+#include <linux/ssc.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+
-+#include <asm/io.h>
-+#include <asm/processor.h>
-+
-+#include "at73c213.h"
-+
-+#define BITRATE_MIN	 8000 /* hardware limit? */
-+#define BITRATE_TARGET	CONFIG_SND_AT73C213_TARGET_BITRATE
-+#define BITRATE_MAX	50000 /* hardware limit */
-+
-+/* initial (hardware reset) AT73C213 register values */
-+static unsigned char snd_at73c213_original_image[18] =
-+{
-+	0x00,	/* 00 - CTRL    */
-+	0x05,	/* 01 - LLIG    */
-+	0x05,	/* 02 - RLIG    */
-+	0x08,	/* 03 - LPMG    */
-+	0x08,	/* 04 - RPMG    */
-+	0x00,	/* 05 - LLOG    */
-+	0x00,	/* 06 - RLOG    */
-+	0x22,	/* 07 - OLC     */
-+	0x09,	/* 08 - MC      */
-+	0x00,	/* 09 - CSFC    */
-+	0x00,	/* 0A - MISC    */
-+	0x00,	/* 0B -         */
-+	0x00,	/* 0C - PRECH   */
-+	0x05,	/* 0D - AUXG    */
-+	0x00,	/* 0E -         */
-+	0x00,	/* 0F -         */
-+	0x00,	/* 10 - RST     */
-+	0x00,	/* 11 - PA_CTRL */
-+};
-+
-+/* SSC setup */
-+static struct ssc_mode ssc_at73c213 =
-+{
-+	.mode			= ATMEL_SSC_MODE_I2S_MASTER,
-+	.data_length		= 16,
-+};
-+
-+/* chip-specific data */
-+struct snd_at73c213 {
-+	struct snd_card			*card;
-+	struct snd_pcm			*pcm;
-+	struct snd_pcm_substream	*substream;
-+	int				irq;
-+	int				period;
-+	unsigned long			bitrate;
-+	struct clk			*bitclk;
-+	struct clk			*dac_clk;
-+	struct ssc_device		*ssc;
-+	struct spi_device		*spi;
-+	struct at73c213_board_info	*info;
-+	struct ssc_xfer_info		ssc_xfer;
-+	u8				spi_wbuffer[2];
-+	u8				spi_rbuffer[2];
-+	/* image of the SPI registers in AT73C213 */
-+	u8				image[18];
-+	spinlock_t			lock;
-+};
-+
-+#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
-+
-+static int
-+snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
-+{
-+	struct spi_message msg;
-+	struct spi_transfer msg_xfer = {
-+		.len		= 2,
-+		.cs_change	= 0,
-+	};
-+
-+	spi_message_init(&msg);
-+
-+	chip->spi_wbuffer[0] = reg;
-+	chip->spi_wbuffer[1] = val;
-+
-+	msg_xfer.tx_buf = chip->spi_wbuffer;
-+	msg_xfer.rx_buf = chip->spi_rbuffer;
-+	spi_message_add_tail(&msg_xfer, &msg);
-+
-+	return spi_sync(chip->spi, &msg);
-+}
-+
-+#define write_reg(_spi, reg, val)				\
-+	do {							\
-+		retval = snd_at73c213_write_reg(_spi, reg, val);	\
-+		if (retval)					\
-+			goto out;				\
-+	} while (0)
-+
-+static struct snd_pcm_hardware snd_at73c213_playback_hw = {
-+	.info		= SNDRV_PCM_INFO_INTERLEAVED |
-+			  SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+	.formats	= SNDRV_PCM_FMTBIT_S16_BE,
-+	.rates		= SNDRV_PCM_RATE_CONTINUOUS,
-+	.rate_min	= 8000,  /* overwritten by chip->bitrate */
-+	.rate_max	= 50000, /* overwritten by chip->bitrate */
-+	.channels_min	= 2,
-+	.channels_max	= 2,
-+	.buffer_bytes_max = 64 * 1024 - 1,
-+	.period_bytes_min = 512,
-+	.period_bytes_max = 64 * 1024 - 1,
-+	.periods_min	= 4,
-+	.periods_max	= 1024,
-+};
-+
-+/*
-+ * calculate and set bitrate and divisions
-+ */
-+static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
-+{
-+	unsigned long ssc_rate = ssc_clk_get_rate(chip->ssc);
-+	unsigned long dac_rate_new, ssc_div, status;
-+	unsigned long ssc_div_max, ssc_div_min;
-+	int max_tries, retval;
-+
-+	/* We connect two clocks here, picking divisors so the I2S clocks
-+	 * out data at the same rate the DAC clocks it in ... and as close
-+	 * as practical to the desired target rate.
-+	 *
-+	 * The DAC master clock (MCLK) is programmable, and is either 256
-+	 * or (not here) 384 times the I2S output clock (BCLK).
-+	 */
-+
-+	/* SSC clock / (bitrate * stereo * 16-bit) */
-+	ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
-+	ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
-+	ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
-+	max_tries = (ssc_div_max - ssc_div_min) / 2;
-+
-+	if ((ssc_div % 2) != 0)
-+		ssc_div++;
-+	if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
-+		ssc_div -= 2;
-+		if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX) {
-+			return -ENXIO;
-+		}
-+	}
-+
-+	/* search for a possible bitrate */
-+	do {
-+		/* SSC clock / (ssc divider * 16-bit * stereo) */
-+		if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
-+			return -ENXIO;
-+
-+		dac_rate_new = 8 * (ssc_rate / ssc_div); /* 256 / (2 * 16) = 8 */
-+
-+		status = clk_round_rate(chip->dac_clk, dac_rate_new);
-+		if (status < 0)
-+			return status;
-+
-+		/* ignore difference smaller than 256 Hz */
-+		if ((status/256) == (dac_rate_new/256))
-+			goto set_rate;
-+
-+		ssc_div += 2;
-+	} while (--max_tries);
-+
-+	/* not able to find a bitrate */
-+	return -ENXIO;
-+
-+set_rate:
-+	status = clk_set_rate(chip->dac_clk, status);
-+	if (status < 0)
-+		return status;
-+
-+	ssc_at73c213.bauddiv = ssc_div;
-+	retval = ssc_set_mode(chip->ssc, &ssc_at73c213);
-+	if (retval)
-+		return retval;
-+
-+	/* SSC clock / (ssc divider * 16-bit * stereo) */
-+	chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
-+
-+	printk(KERN_INFO "at73c213: supported bitrate is %lu (%lu divider)\n",
-+			chip->bitrate, ssc_div);
-+
-+	return 0;
-+}
-+
-+/* open callback */
-+static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+	snd_at73c213_playback_hw.rate_min = chip->bitrate;
-+	snd_at73c213_playback_hw.rate_max = chip->bitrate;
-+	runtime->hw = snd_at73c213_playback_hw;
-+	chip->substream = substream;
-+
-+	return 0;
-+}
-+
-+/* close callback */
-+static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	chip->substream = NULL;
-+	return 0;
-+}
-+
-+/* hw_params callback */
-+static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
-+				 struct snd_pcm_hw_params *hw_params)
-+{
-+	return snd_pcm_lib_malloc_pages(substream,
-+					params_buffer_bytes(hw_params));
-+}
-+
-+/* hw_free callback */
-+static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+	return snd_pcm_lib_free_pages(substream);
-+}
-+
-+/* prepare callback */
-+static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	int block_size;
-+
-+	block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+	chip->period = 0;
-+
-+	/* Make sure that our data are actually readable by the SSC */
-+	dma_sync_single_for_device(&chip->spi->dev,
-+			(long)runtime->dma_area,
-+			block_size, DMA_TO_DEVICE);
-+	dma_sync_single_for_device(&chip->spi->dev,
-+			(long)runtime->dma_area + block_size,
-+			block_size, DMA_TO_DEVICE);
-+
-+	chip->ssc_xfer.data	 = (long)runtime->dma_area;
-+	chip->ssc_xfer.data	 &= ~0xe0000000;
-+	chip->ssc_xfer.len	 = runtime->period_size * 2;
-+	chip->ssc_xfer.next_data = (long)runtime->dma_area + block_size;
-+	chip->ssc_xfer.next_data &= ~0xe0000000;
-+	chip->ssc_xfer.next_len  = runtime->period_size * 2;
-+	ssc_set_tx_buffers(chip->ssc, &chip->ssc_xfer);
-+
-+	return 0;
-+}
-+
-+/* trigger callback */
-+static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
-+				   int cmd)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	int retval = 0;
-+	unsigned long flags = 0;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_START:
-+		ssc_enable_int(chip->ssc, SSC_BIT(IER_ENDTX));
-+		ssc_enable_xfer(chip->ssc, 1, 0);
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+		ssc_disable_xfer(chip->ssc, 1, 0);
-+		ssc_disable_int(chip->ssc, SSC_BIT(IDR_ENDTX));
-+		break;
-+	default:
-+		printk(KERN_WARNING "at73c213: spurious command %x\n", cmd);
-+		retval = -EINVAL;
-+		break;
-+	}
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+
-+	return retval;
-+}
-+
-+/* pointer callback */
-+static snd_pcm_uframes_t snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	snd_pcm_uframes_t pos;
-+	unsigned long bytes;
-+
-+	ssc_get_tx_buffers(chip->ssc, &chip->ssc_xfer);
-+	bytes = chip->ssc_xfer.data - (unsigned long)runtime->dma_area;
-+
-+	pos = bytes_to_frames(runtime, bytes);
-+	if (pos >= runtime->buffer_size)
-+		pos -= runtime->buffer_size;
-+
-+	return pos;
-+}
-+
-+/* operators */
-+static struct snd_pcm_ops at73c213_playback_ops = {
-+	.open		= snd_at73c213_pcm_open,
-+	.close		= snd_at73c213_pcm_close,
-+	.ioctl		= snd_pcm_lib_ioctl,
-+	.hw_params	= snd_at73c213_pcm_hw_params,
-+	.hw_free	= snd_at73c213_pcm_hw_free,
-+	.prepare	= snd_at73c213_pcm_prepare,
-+	.trigger	= snd_at73c213_pcm_trigger,
-+	.pointer	= snd_at73c213_pcm_pointer,
-+};
-+
-+/* free a pcm device */
-+static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_chip(pcm);
-+	if (chip->pcm) {
-+		snd_pcm_lib_preallocate_free_for_all(chip->pcm);
-+		chip->pcm = NULL;
-+	}
-+}
-+
-+/* create a new pcm device */
-+static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
-+{
-+	struct snd_pcm *pcm;
-+	int retval;
-+
-+	retval = snd_pcm_new(chip->card, chip->card->shortname, device, 1, 0, &pcm);
-+	if (retval < 0)
-+		return retval;
-+
-+	pcm->private_data = chip;
-+	pcm->private_free = snd_at73c213_pcm_free;
-+	pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
-+	strcpy(pcm->name, "at73c213");
-+	chip->pcm = pcm;
-+
-+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
-+
-+	/* TODO: why can I not use SNDRV_DMA_TYPE_DEV? */
-+	retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
-+			SNDRV_DMA_TYPE_CONTINUOUS,
-+			snd_dma_continuous_data(GFP_KERNEL),
-+			64 * 1024, 64 * 1024);
-+	return 0;
-+}
-+
-+static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
-+{
-+	struct snd_at73c213 *chip = dev_id;
-+	struct snd_pcm_runtime *runtime = chip->substream->runtime;
-+	u32 status;
-+	int offset, next_period, block_size, mask, retval;
-+
-+	spin_lock(&chip->lock);
-+
-+	block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+	retval = ssc_get_int_mask(chip->ssc, &status);
-+	if (retval)
-+		return retval;
-+
-+	if (status & SSC_BIT(IMR_ENDTX)) {
-+		chip->period++;
-+		if (chip->period == runtime->periods)
-+			chip->period = 0;
-+		next_period = chip->period + 1;
-+		if (next_period == runtime->periods)
-+			next_period = 0;
-+
-+		offset = block_size * next_period;
-+
-+		/* make sure that our data are actually readable by the SSC */
-+		dma_sync_single_for_device(&chip->spi->dev,
-+				(long)runtime->dma_area + offset,
-+				block_size, DMA_TO_DEVICE);
-+		chip->ssc_xfer.data	 = 0; /* only update next pointer */
-+		chip->ssc_xfer.next_data = (long)runtime->dma_area + offset;
-+		chip->ssc_xfer.next_data &= ~0xe0000000;
-+		chip->ssc_xfer.next_len  = runtime->period_size * 2;
-+		ssc_set_tx_buffers(chip->ssc, &chip->ssc_xfer);
-+	} else {
-+		printk(KERN_WARNING
-+				"Spurious SSC interrupt, status = 0x%08lx\n",
-+				(unsigned long)status);
-+		ssc_disable_int(chip->ssc, status);
-+	}
-+
-+	ssc_get_int_mask(chip->ssc, &mask);
-+	spin_unlock(&chip->lock);
-+
-+	if (status & SSC_BIT(IMR_ENDTX))
-+		snd_pcm_period_elapsed(chip->substream);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Mixer functions
-+ */
-+#if 0 /* Function not in use */
-+static int snd_at73c213_mono_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	unsigned long mask = (kcontrol->private_value >> 16) & 0xff;
-+
-+	uinfo->type = (mask == 1) ?
-+		SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = mask;
-+
-+	return 0;
-+}
-+#endif
-+
-+static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	unsigned long flags;
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+
-+	ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & mask;
-+
-+	if (invert)
-+		ucontrol->value.integer.value[0] =
-+			(mask - ucontrol->value.integer.value[0]);
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	unsigned long flags;
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+	int change, retval;
-+	unsigned short val;
-+
-+	val = (ucontrol->value.integer.value[0] & mask);
-+	if (invert)
-+		val = mask - val;
-+	val <<= shift;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+
-+	val = (chip->image[reg] & ~(mask << shift)) | val;
-+	change = val != chip->image[reg];
-+	write_reg(chip, reg, val);
-+
-+	chip->image[reg] = val;
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+
-+	return change;
-+
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	int mask = (kcontrol->private_value >> 24) & 0xFF;
-+
-+	uinfo->type = mask == 1 ?
-+		SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 2;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = mask;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	unsigned long flags;
-+	int left_reg = kcontrol->private_value & 0xff;
-+	int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+	int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+	int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+	int invert = (kcontrol->private_value >> 22) & 1;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+
-+	ucontrol->value.integer.value[0] =
-+		(chip->image[left_reg] >> shift_left) & mask;
-+	ucontrol->value.integer.value[1] =
-+		(chip->image[right_reg] >> shift_right) & mask;
-+
-+	if (invert) {
-+		ucontrol->value.integer.value[0] =
-+			(mask - ucontrol->value.integer.value[0]);
-+		ucontrol->value.integer.value[1] =
-+			(mask - ucontrol->value.integer.value[1]);
-+	}
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	unsigned long flags;
-+	int left_reg = kcontrol->private_value & 0xff;
-+	int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+	int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+	int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+	int invert = (kcontrol->private_value >> 22) & 1;
-+	int change, retval;
-+	unsigned short val1, val2;
-+
-+	val1 = ucontrol->value.integer.value[0] & mask;
-+	val2 = ucontrol->value.integer.value[1] & mask;
-+	if (invert) {
-+		val1 = mask - val1;
-+		val2 = mask - val2;
-+	}
-+	val1 <<= shift_left;
-+	val2 <<= shift_right;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+
-+	val1 = (chip->image[left_reg] & ~(mask << shift_left)) | val1;
-+	val2 = (chip->image[right_reg] & ~(mask << shift_right)) | val2;
-+	change = val1 != chip->image[left_reg] || val2 != chip->image[right_reg];
-+	write_reg(chip, left_reg, val1);
-+	write_reg(chip, right_reg, val2);
-+
-+	chip->image[left_reg] = val1;
-+	chip->image[right_reg] = val2;
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+
-+	return change;
-+
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = 1;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	unsigned long flags;
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+
-+	ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & 0x01;
-+
-+	if (invert)
-+		ucontrol->value.integer.value[0] =
-+			(0x01 - ucontrol->value.integer.value[0]);
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	unsigned long flags;
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+	int change, retval;
-+	unsigned short val;
-+
-+	if (ucontrol->value.integer.value[0])
-+		val = mask;
-+	else
-+		val = 0;
-+
-+	if (invert)
-+		val = mask - val;
-+	val <<= shift;
-+
-+	spin_lock_irqsave(&chip->lock, flags);
-+
-+	val |= (chip->image[reg] & ~(mask << shift));
-+	change = val != chip->image[reg];
-+
-+	write_reg(chip, reg, val);
-+
-+	chip->image[reg] = val;
-+
-+	spin_unlock_irqrestore(&chip->lock, flags);
-+
-+	return change;
-+
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xFF) - 1;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_line_capture_volume_info(
-+		struct snd_kcontrol *kcontrol,
-+		struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 2;
-+	uinfo->value.integer.min = 14;
-+	uinfo->value.integer.max = 31;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_aux_capture_volume_info(
-+		struct snd_kcontrol *kcontrol,
-+		struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 14;
-+	uinfo->value.integer.max = 31;
-+
-+	return 0;
-+}
-+
-+#define AT73C213_MONO(xname, xindex, reg, shift, mask, invert) \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
-+  .info = snd_at73c213_mono_info, \
-+  .get = snd_at73c213_mono_get, .put = snd_at73c213_mono_put, \
-+  .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
-+
-+#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
-+  .info = snd_at73c213_mono_switch_info, \
-+  .get = snd_at73c213_mono_switch_get, .put = snd_at73c213_mono_switch_put, \
-+  .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
-+
-+#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
-+  .info = snd_at73c213_stereo_info, \
-+  .get = snd_at73c213_stereo_get, .put = snd_at73c213_stereo_put, \
-+  .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) }
-+
-+static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
-+AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1F, 1),
-+AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
-+AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1F, 1),
-+AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
-+AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "PA Playback Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_pa_volume_info,
-+	.get	= snd_at73c213_mono_get,
-+	.put	= snd_at73c213_mono_put,
-+	.private_value	= PA_CTRL|(PA_CTRL_APAGAIN<<8)|(0x0F<<16)|(1<<24),
-+},
-+AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
-+AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "Aux Capture Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_aux_capture_volume_info,
-+	.get	= snd_at73c213_mono_get,
-+	.put	= snd_at73c213_mono_put,
-+	.private_value	= DAC_AUXG|(0<<8)|(0x1F<<16)|(1<<24),
-+},
-+AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "Line Capture Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_line_capture_volume_info,
-+	.get	= snd_at73c213_stereo_get,
-+	.put	= snd_at73c213_stereo_put,
-+	.private_value	= DAC_LLIG|(DAC_RLIG<<8)|(0<<16)|(0<<19)|(0x1F<<24)|(1<<22),
-+},
-+AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
-+};
-+
-+static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
-+{
-+	struct snd_card *card;
-+	int errval, idx;
-+
-+	if (chip == NULL || chip->pcm == NULL)
-+		return -EINVAL;
-+
-+	card = chip->card;
-+
-+	strcpy(card->mixername, chip->pcm->name);
-+
-+	for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
-+		if ((errval = snd_ctl_add(card,
-+				snd_ctl_new1(&snd_at73c213_controls[idx],
-+				chip))) < 0) {
-+			goto cleanup;
-+		}
-+	}
-+
-+	return 0;
-+
-+cleanup:
-+	for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
-+		struct snd_kcontrol *kctl;
-+		kctl = snd_ctl_find_numid(card, idx);
-+		if (kctl)
-+			snd_ctl_remove(card, kctl);
-+	}
-+	return errval;
-+}
-+
-+/*
-+ * Device functions
-+ */
-+static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
-+{
-+	int retval;
-+	unsigned char dac_ctrl = 0;
-+
-+	retval = snd_at73c213_set_bitrate(chip);
-+	if (retval)
-+		goto out;
-+
-+	/* enable DAC master clock */
-+	clk_enable(chip->dac_clk);
-+
-+	/* initialize at73c213 on SPI bus */
-+	write_reg(chip, DAC_RST, 0x04);
-+	msleep(1);
-+	write_reg(chip, DAC_RST, 0x03);
-+
-+	/* precharge everything */
-+	write_reg(chip, DAC_PRECH, 0xFF);
-+	write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
-+	write_reg(chip, DAC_CTRL, (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR));
-+
-+	msleep(50);
-+
-+	/* stop precharging PA */
-+	write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
-+	chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
-+
-+	msleep(450);
-+
-+	/* stop precharging DAC, turn on master power */
-+	write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
-+	chip->image[DAC_PRECH] = (1<<DAC_PRECH_ONMSTR);
-+
-+	msleep(1);
-+
-+	/* turn on DAC */
-+	dac_ctrl = (1<<DAC_CTRL_ONDACL)|(1<<DAC_CTRL_ONDACR)|
-+			(1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR);
-+
-+	write_reg(chip, DAC_CTRL, dac_ctrl);
-+	chip->image[DAC_CTRL] = dac_ctrl;
-+
-+	/* mute sound */
-+	write_reg(chip, DAC_LMPG, 0x3F);
-+	chip->image[DAC_LMPG] = 0x3F;
-+	write_reg(chip, DAC_RMPG, 0x3F);
-+	chip->image[DAC_RMPG] = 0x3F;
-+	write_reg(chip, DAC_LLOG, 0x3F);
-+	chip->image[DAC_LLOG] = 0x3F;
-+	write_reg(chip, DAC_RLOG, 0x3F);
-+	chip->image[DAC_RLOG] = 0x3F;
-+	write_reg(chip, DAC_LLIG, 0x11);
-+	chip->image[DAC_LLIG] = 0x11;
-+	write_reg(chip, DAC_RLIG, 0x11);
-+	chip->image[DAC_RLIG] = 0x11;
-+	write_reg(chip, DAC_AUXG, 0x11);
-+	chip->image[DAC_AUXG] = 0x11;
-+
-+	/* enable I2S clock */
-+	retval = ssc_enable(chip->ssc, 1, 0);
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_dev_free(struct snd_device *device)
-+{
-+	struct snd_at73c213 *chip = device->device_data;
-+
-+	ssc_disable(chip->ssc, 1, 0);
-+	if (chip->irq >= 0) {
-+		free_irq(chip->irq, chip);
-+		chip->irq = -1;
-+	}
-+	ssc_free(chip->ssc);
-+
-+	return 0;
-+}
-+
-+static int __devinit snd_at73c213_init(struct snd_card *card,
-+					 struct spi_device *spi)
-+{
-+	static struct snd_device_ops ops = {
-+		.dev_free	= snd_at73c213_dev_free,
-+	};
-+	struct snd_at73c213 *chip = get_chip(card);
-+	int irq, retval;
-+
-+	irq = ssc_to_irq(chip->ssc);
-+	if (irq < 0)
-+		return irq;
-+
-+	spin_lock_init(&chip->lock);
-+	chip->card = card;
-+	chip->irq = -1;
-+
-+	retval = -ENOMEM;
-+
-+	retval = spi_setup(chip->spi);
-+	if (retval)
-+		goto cleanup;
-+
-+	retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
-+	if (retval) {
-+		snd_printk("unable to request irq %d\n", irq);
-+		goto cleanup;
-+	}
-+	chip->irq = irq;
-+
-+	memcpy(&chip->image, &snd_at73c213_original_image,
-+			sizeof(snd_at73c213_original_image));
-+
-+	retval = snd_at73c213_chip_init(chip);
-+	if (retval)
-+		goto cleanup;
-+
-+	retval = snd_at73c213_pcm_new(chip, 0);
-+	if (retval)
-+		goto cleanup;
-+
-+	retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
-+	if (retval)
-+		goto cleanup;
-+
-+	retval = snd_at73c213_mixer(chip);
-+	if (retval)
-+		goto cleanup;
-+
-+	snd_card_set_dev(card, &spi->dev);
-+
-+	return retval;
-+
-+cleanup:
-+	if (!list_empty(&card->devices))
-+		snd_device_free(card, chip);
-+	if (chip->pcm)
-+		dev_dbg(&spi->dev, "FIXME: howto free pcm?\n");
-+	if (chip->irq >= 0) {
-+		free_irq(chip->irq, chip);
-+		chip->irq = -1;
-+	}
-+	return retval;
-+}
-+
-+static int snd_at73c213_probe(struct spi_device *spi)
-+{
-+	struct at73c213_board_info	*info;
-+	struct clk			*dac_clk;
-+	struct snd_card			*card;
-+	struct snd_at73c213		*chip;
-+	int				retval;
-+	char				id[16];
-+
-+	info = spi->dev.platform_data;
-+	if (!info) {
-+		dev_dbg(&spi->dev, "no platform_data\n");
-+		return -ENXIO;
-+	}
-+
-+	dac_clk = clk_get(NULL, info->dac_clk);
-+	if (IS_ERR(dac_clk)) {
-+		dev_dbg(&spi->dev, "unable to get DAC clk '%s'\n",
-+				info->dac_clk);
-+		return (PTR_ERR(dac_clk));
-+	}
-+
-+	retval = -ENOMEM;
-+
-+	/* allocate "card" using some unused identifiers */
-+	snprintf(id, sizeof id, "at73c213_%d", info->i2s_dev);
-+	card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
-+	if (!card)
-+		goto cleanup_card;
-+
-+	chip = card->private_data;
-+	chip->spi = spi;
-+	chip->info = info;
-+	chip->dac_clk = dac_clk;
-+
-+	chip->ssc = ssc_request(info->i2s_dev);
-+	if (IS_ERR(chip->ssc)) {
-+		dev_dbg(&spi->dev, "could not get ssc%d device\n",
-+				info->i2s_dev);
-+		retval = (PTR_ERR(chip->ssc));
-+		goto cleanup;
-+	}
-+
-+	retval = snd_at73c213_init(card, spi);
-+	if (retval)
-+		goto cleanup;
-+
-+	strcpy(card->driver, "at73c213");
-+	strcpy(card->shortname, info->shortname);
-+	sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
-+
-+	retval = snd_card_register(card);
-+	if (retval)
-+		goto cleanup;
-+
-+	dev_set_drvdata(&spi->dev, card);
-+	return 0;
-+
-+cleanup:
-+	if (IS_ERR(chip->ssc))
-+		ssc_free(chip->ssc);
-+	if (card)
-+		snd_card_free(card);
-+cleanup_card:
-+	if (dac_clk)
-+		clk_put(dac_clk);
-+	return retval;
-+}
-+
-+static int __devexit snd_at73c213_remove(struct spi_device *spi)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+	int retval;
-+
-+	/* Stop playback */
-+	ssc_disable(chip->ssc, 1, 0);
-+
-+	/* Mute sound */
-+	write_reg(chip, DAC_LMPG, 0x3F);
-+	chip->image[DAC_LMPG] = 0x3F;
-+	write_reg(chip, DAC_RMPG, 0x3F);
-+	chip->image[DAC_RMPG] = 0x3F;
-+	write_reg(chip, DAC_LLOG, 0x3F);
-+	chip->image[DAC_LLOG] = 0x3F;
-+	write_reg(chip, DAC_RLOG, 0x3F);
-+	chip->image[DAC_RLOG] = 0x3F;
-+	write_reg(chip, DAC_LLIG, 0x11);
-+	chip->image[DAC_LLIG] = 0x11;
-+	write_reg(chip, DAC_RLIG, 0x11);
-+	chip->image[DAC_RLIG] = 0x11;
-+	write_reg(chip, DAC_AUXG, 0x11);
-+	chip->image[DAC_AUXG] = 0x11;
-+
-+	/* Turn off PA */
-+	write_reg(chip, PA_CTRL, (chip->image[PA_CTRL]|0x0F));
-+	chip->image[PA_CTRL] |= 0x0F;
-+	msleep(10);
-+	write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
-+	chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
-+
-+	/* Turn off external DAC */
-+	write_reg(chip, DAC_CTRL, 0x0C);
-+	chip->image[DAC_CTRL] = 0x0C;
-+	msleep(2);
-+	write_reg(chip, DAC_CTRL, 0x00);
-+	chip->image[DAC_CTRL] = 0x00;
-+
-+	/* Turn off master power */
-+	write_reg(chip, DAC_PRECH, 0x00);
-+	chip->image[DAC_PRECH] = 0x00;
-+
-+	/* Stop DAC master clock */
-+	if (chip->dac_clk) {
-+		clk_disable(chip->dac_clk);
-+		clk_put(chip->dac_clk);
-+	}
-+
-+out:
-+	if (card) {
-+		snd_card_free(card);
-+		dev_set_drvdata(&spi->dev, NULL);
-+	}
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+
-+	ssc_disable(chip->ssc, 1, 0);
-+	clk_disable(chip->dac_clk);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_resume(struct spi_device *spi)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+
-+	clk_enable(chip->dac_clk);
-+	ssc_enable(chip->ssc, 1, 0);
-+
-+	return 0;
-+}
-+#endif /* CONFIG_PM */
-+
-+/* Driver core initialization */
-+static struct spi_driver at73c213_driver = {
-+	.driver		= {
-+		.name	= "at73c213",
-+	},
-+	.probe		= snd_at73c213_probe,
-+#ifdef CONFIG_PM
-+	.suspend	= snd_at73c213_suspend,
-+	.resume		= snd_at73c213_resume,
-+#endif
-+	.remove		= __devexit_p(snd_at73c213_remove),
-+};
-+
-+static int __init at73c213_init(void)
-+{
-+	return spi_register_driver(&at73c213_driver);
-+}
-+module_init(at73c213_init);
-+
-+static void __exit at73c213_exit(void)
-+{
-+	spi_unregister_driver(&at73c213_driver);
-+}
-+module_exit(at73c213_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
-+MODULE_LICENSE("GPL");
-diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
-new file mode 100644
-index 0000000..fd8b372
---- /dev/null
-+++ b/sound/spi/at73c213.h
-@@ -0,0 +1,119 @@
-+/*
-+ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
-+ *
-+ * Copyright (C) 2006 - 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+
-+#ifndef _SND_AT73C213_H
-+#define _SND_AT73C213_H
-+
-+/* DAC control register */
-+#define DAC_CTRL		0x00
-+#define DAC_CTRL_ONPADRV	7
-+#define DAC_CTRL_ONAUXIN	6
-+#define DAC_CTRL_ONDACR		5
-+#define DAC_CTRL_ONDACL		4
-+#define DAC_CTRL_ONLNOR		3
-+#define DAC_CTRL_ONLNOL		2
-+#define DAC_CTRL_ONLNIR		1
-+#define DAC_CTRL_ONLNIL		0
-+
-+/* DAC left line in gain register */
-+#define DAC_LLIG		0x01
-+#define DAC_LLIG_LLIG		0
-+
-+/* DAC right line in gain register */
-+#define DAC_RLIG		0x02
-+#define DAC_RLIG_RLIG		0
-+
-+/* DAC Left Master Playback Gain Register */
-+#define DAC_LMPG		0x03
-+#define DAC_LMPG_LMPG		0
-+
-+/* DAC Right Master Playback Gain Register */
-+#define DAC_RMPG		0x04
-+#define DAC_RMPG_RMPG		0
-+
-+/* DAC Left Line Out Gain Register */
-+#define DAC_LLOG		0x05
-+#define DAC_LLOG_LLOG		0
-+
-+/* DAC Right Line Out Gain Register */
-+#define DAC_RLOG		0x06
-+#define DAC_RLOG_RLOG		0
-+
-+/* DAC Output Level Control Register */
-+#define DAC_OLC			0x07
-+#define DAC_OLC_RSHORT		7
-+#define DAC_OLC_ROLC		4
-+#define DAC_OLC_LSHORT		3
-+#define DAC_OLC_LOLC		0
-+
-+/* DAC Mixer Control Register */
-+#define DAC_MC			0x08
-+#define DAC_MC_INVR		5
-+#define DAC_MC_INVL		4
-+#define DAC_MC_RMSMIN2		3
-+#define DAC_MC_RMSMIN1		2
-+#define DAC_MC_LMSMIN2		1
-+#define DAC_MC_LMSMIN1		0
-+
-+/* DAC Clock and Sampling Frequency Control Register */
-+#define DAC_CSFC		0x09
-+#define DAC_CSFC_OVRSEL		4
-+
-+/* DAC Miscellaneous Register */
-+#define DAC_MISC		0x0A
-+#define DAC_MISC_VCMCAPSEL	7
-+#define DAC_MISC_DINTSEL	4
-+#define DAC_MISC_DITHEN		3
-+#define DAC_MISC_DEEMPEN	2
-+#define DAC_MISC_NBITS		0
-+
-+/* DAC Precharge Control Register */
-+#define DAC_PRECH		0x0C
-+#define DAC_PRECH_PRCHGPDRV	7
-+#define DAC_PRECH_PRCHGAUX1	6
-+#define DAC_PRECH_PRCHGLNOR	5
-+#define DAC_PRECH_PRCHGLNOL	4
-+#define DAC_PRECH_PRCHGLNIR	3
-+#define DAC_PRECH_PRCHGLNIL	2
-+#define DAC_PRECH_PRCHG		1
-+#define DAC_PRECH_ONMSTR	0
-+
-+/* DAC Auxiliary Input Gain Control Register */
-+#define DAC_AUXG		0x0D
-+#define DAC_AUXG_AUXG		0
-+
-+/* DAC Reset Register */
-+#define DAC_RST			0x10
-+#define DAC_RST_RESMASK		2
-+#define DAC_RST_RESFILZ		1
-+#define DAC_RST_RSTZ		0
-+
-+/* Power Amplifier Control Register */
-+#define PA_CTRL			0x11
-+#define PA_CTRL_APAON		6
-+#define PA_CTRL_APAPRECH	5
-+#define PA_CTRL_APALP		4
-+#define PA_CTRL_APAGAIN		0
-+
-+#endif /* _SND_AT73C213_H */

toolchain/kernel-headers/linux-2.6.22.1-003-atmel.3-avr32-updates.patch

@@ -1,14820 +0,0 @@
-diff --git a/MAINTAINERS b/MAINTAINERS
-index df40a4e..3c5cfef 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -674,6 +674,13 @@ P:	Haavard Skinnemoen
- M:	hskinnemoen@atmel.com
- S:	Supported
- 
-+ATMEL USBA UDC DRIVER
-+P:	Haavard Skinnemoen
-+M:	hskinnemoen@atmel.com
-+L:	kernel@avr32linux.org
-+W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
-+S:	Supported
-+
- ATMEL WIRELESS DRIVER
- P:	Simon Kelley
- M:	simon@thekelleys.org.uk
-diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
-index 3ec7658..ec6c7c5 100644
---- a/arch/avr32/Kconfig
-+++ b/arch/avr32/Kconfig
-@@ -113,6 +113,13 @@ config BOARD_ATNGW100
- 	bool "ATNGW100 Network Gateway"
- endchoice
- 
-+if BOARD_ATSTK1000
-+source "arch/avr32/boards/atstk1000/Kconfig"
-+endif
-+if BOARD_ATNGW100
-+source "arch/avr32/boards/atngw100/Kconfig"
-+endif
-+
- choice
- 	prompt "Boot loader type"
- 	default LOADER_U_BOOT
-@@ -171,6 +178,10 @@ config OWNERSHIP_TRACE
- 	  enabling Nexus-compliant debuggers to keep track of the PID of the
- 	  currently executing task.
- 
-+config DW_DMAC
-+	tristate "Synopsys DesignWare DMA Controller support"
-+	default y if CPU_AT32AP7000
-+
- # FPU emulation goes here
- 
- source "kernel/Kconfig.hz"
-@@ -185,6 +196,27 @@ config CMDLINE
- 
- endmenu
- 
-+menu "Power managment options"
-+
-+menu "CPU Frequency scaling"
-+
-+source "drivers/cpufreq/Kconfig"
-+
-+config CPU_FREQ_AT32AP
-+	bool "CPU frequency driver for AT32AP"
-+	depends on CPU_FREQ && PLATFORM_AT32AP
-+	default n
-+	help
-+	  This enables the CPU frequency driver for AT32AP processors.
-+
-+	  For details, take a look in <file:Documentation/cpu-freq>.
-+
-+	  If in doubt, say N.
-+
-+endmenu
-+
-+endmenu
-+
- menu "Bus options"
- 
- config PCI
-diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
-index dc6bc01..eb72198 100644
---- a/arch/avr32/Makefile
-+++ b/arch/avr32/Makefile
-@@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
- core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
- core-y					+= arch/avr32/kernel/
- core-y					+= arch/avr32/mm/
-+drivers-y				+= arch/avr32/drivers/
- libs-y					+= arch/avr32/lib/
- 
- archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
-diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
-new file mode 100644
-index 0000000..5d922df
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/Kconfig
-@@ -0,0 +1,12 @@
-+# NGW100 customization
-+
-+config BOARD_ATNGW100_I2C_GPIO
-+	bool "Use GPIO for i2c instead of built-in TWI module"
-+	help
-+	  The driver for the built-in TWI module has been plagued by
-+	  various problems, while the i2c-gpio driver is based on the
-+	  trusty old i2c-algo-bit bitbanging engine, making it work
-+	  on pretty much any setup.
-+
-+	  Choose 'Y' here if you're having i2c-related problems and
-+	  want to rule out the i2c bus driver.
-diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
-index 6c4dc0a..d649974 100644
---- a/arch/avr32/boards/atngw100/setup.c
-+++ b/arch/avr32/boards/atngw100/setup.c
-@@ -9,10 +9,12 @@
-  */
- #include <linux/clk.h>
- #include <linux/etherdevice.h>
-+#include <linux/i2c-gpio.h>
- #include <linux/init.h>
- #include <linux/linkage.h>
- #include <linux/platform_device.h>
- #include <linux/types.h>
-+#include <linux/leds.h>
- #include <linux/spi/spi.h>
- 
- #include <asm/io.h>
-@@ -21,6 +23,7 @@
- #include <asm/arch/at32ap7000.h>
- #include <asm/arch/board.h>
- #include <asm/arch/init.h>
-+#include <asm/arch/portmux.h>
- 
- /* Initialized by bootloader-specific startup code. */
- struct tag *bootloader_tags __initdata;
-@@ -39,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
- 	},
- };
- 
-+static struct mci_platform_data __initdata mci0_data = {
-+	.detect_pin	= GPIO_PIN_PC(25),
-+	.wp_pin		= GPIO_PIN_PE(0),
-+};
-+
- /*
-  * The next two functions should go away as the boot loader is
-  * supposed to initialize the macb address registers with a valid
-@@ -100,8 +108,46 @@ void __init setup_board(void)
- 	at32_setup_serial_console(0);
- }
- 
-+static const struct gpio_led ngw_leds[] = {
-+	{ .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1,
-+		.default_trigger = "heartbeat",
-+	},
-+	{ .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, },
-+	{ .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, },
-+};
-+
-+static const struct gpio_led_platform_data ngw_led_data = {
-+	.num_leds =	ARRAY_SIZE(ngw_leds),
-+	.leds =		(void *) ngw_leds,
-+};
-+
-+static struct platform_device ngw_gpio_leds = {
-+	.name =		"leds-gpio",
-+	.id =		-1,
-+	.dev = {
-+		.platform_data = (void *) &ngw_led_data,
-+	}
-+};
-+
-+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
-+static struct i2c_gpio_platform_data i2c_gpio_data = {
-+	.sda_pin	= GPIO_PIN_PA(6),
-+	.scl_pin	= GPIO_PIN_PA(7),
-+};
-+
-+static struct platform_device i2c_gpio_device = {
-+	.name		= "i2c-gpio",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &i2c_gpio_data,
-+	},
-+};
-+#endif
-+
- static int __init atngw100_init(void)
- {
-+	unsigned	i;
-+
- 	/*
- 	 * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
- 	 * reserve any pins for it.
-@@ -115,6 +161,22 @@ static int __init atngw100_init(void)
- 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
- 
- 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+	at32_add_device_mci(0, &mci0_data);
-+	at32_add_device_usba(0, NULL);
-+
-+	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
-+		at32_select_gpio(ngw_leds[i].gpio,
-+				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-+	}
-+	platform_device_register(&ngw_gpio_leds);
-+
-+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
-+	at32_select_gpio(i2c_gpio_data.sda_pin, 0);
-+	at32_select_gpio(i2c_gpio_data.scl_pin, 0);
-+	platform_device_register(&i2c_gpio_device);
-+#else
-+	at32_add_device_twi(0);
-+#endif
- 
- 	return 0;
- }
-diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-new file mode 100644
-index 0000000..718578f
---- /dev/null
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -0,0 +1,79 @@
-+# STK1000 customization
-+
-+if BOARD_ATSTK1002
-+
-+config BOARD_ATSTK1002_CUSTOM
-+	bool "Non-default STK-1002 jumper settings"
-+	help
-+	  You will normally leave the jumpers on the CPU card at their
-+	  default settings.  If you need to use certain peripherals,
-+	  you will need to change some of those jumpers.
-+
-+if BOARD_ATSTK1002_CUSTOM
-+
-+config BOARD_ATSTK1002_SW1_CUSTOM
-+	bool "SW1: use SSC1 (not SPI0)"
-+	help
-+	  This also prevents using the external DAC as an audio interface,
-+	  and means you can't initialize the on-board QVGA display.
-+
-+config BOARD_ATSTK1002_SW2_CUSTOM
-+	bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
-+	help
-+	  If you change this you'll want an updated boot loader putting
-+	  the console on UART-C not UART-A.
-+
-+config BOARD_ATSTK1002_SW3_CUSTOM
-+	bool "SW3: use TIMER1 (not SSC0 and GCLK)"
-+	help
-+	  This also prevents using the external DAC as an audio interface.
-+
-+config BOARD_ATSTK1002_SW4_CUSTOM
-+	bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
-+	help
-+	  To use the camera interface you'll need a custom card (on the
-+	  PCI-format connector) connect a video sensor.
-+
-+config BOARD_ATSTK1002_SW5_CUSTOM
-+	bool "SW5: use MACB1 (not LCDC)"
-+
-+config BOARD_ATSTK1002_SW6_CUSTOM
-+	bool "SW6: more GPIOs (not MACB0)"
-+
-+endif	# custom
-+
-+config BOARD_ATSTK1002_SPI1
-+	bool "Configure SPI1 controller"
-+	depends on !BOARD_ATSTK1002_SW4_CUSTOM
-+	help
-+	  All the signals for the second SPI controller are available on
-+	  GPIO lines and accessed through the J1 jumper block.  Say "y"
-+	  here to configure that SPI controller.
-+
-+config BOARD_ATSTK1002_J2_LED
-+	bool
-+	default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
-+
-+choice
-+	prompt "LEDs connected to J2:"
-+	depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
-+	optional
-+	help
-+	  Select this if you have jumpered the J2 jumper block to the
-+	  LED0..LED7 amber leds, or to the RGB leds, using a ten-pin
-+	  IDC cable.  A default "heartbeat" trigger is provided, but
-+	  you can of course override this.
-+
-+config BOARD_ATSTK1002_J2_LED8
-+	bool "LED0..LED7"
-+	help
-+	  Select this if J2 is jumpered to LED0..LED7 amber leds.
-+
-+config BOARD_ATSTK1002_J2_RGB
-+	bool "RGB leds"
-+	help
-+	  Select this if J2 is jumpered to the RGB leds.
-+
-+endchoice
-+
-+endif	# stk 1002
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index e253e86..c958fd4 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -11,10 +11,12 @@
- #include <linux/etherdevice.h>
- #include <linux/init.h>
- #include <linux/kernel.h>
-+#include <linux/leds.h>
- #include <linux/platform_device.h>
- #include <linux/string.h>
- #include <linux/types.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
- 
- #include <video/atmel_lcdc.h>
- 
-@@ -27,16 +29,47 @@
- 
- #include "atstk1000.h"
- 
--#define	SW2_DEFAULT		/* MMCI and UART_A available */
- 
- struct eth_addr {
- 	u8 addr[6];
- };
- 
- static struct eth_addr __initdata hw_addr[2];
--static struct eth_platform_data __initdata eth_data[2];
-+static struct eth_platform_data __initdata eth_data[2] = {
-+	{
-+		/*
-+		 * The MDIO pullups on STK1000 are a bit too weak for
-+		 * the autodetection to work properly, so we have to
-+		 * mask out everything but the correct address.
-+		 */
-+		.phy_mask	= ~(1U << 16),
-+	},
-+	{
-+		.phy_mask	= ~(1U << 17),
-+	},
-+};
-+
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+static struct at73c213_board_info at73c213_data = {
-+	.ssc_id		= 0,
-+	.shortname	= "AVR32 STK1000 external DAC",
-+};
-+#endif
-+#endif
- 
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
- static struct spi_board_info spi0_board_info[] __initdata = {
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+	{
-+		/* AT73C213 */
-+		.modalias	= "at73c213",
-+		.max_speed_hz	= 200000,
-+		.chip_select	= 0,
-+		.mode		= SPI_MODE_1,
-+		.platform_data	= &at73c213_data,
-+	},
-+#endif
- 	{
- 		/* QVGA display */
- 		.modalias	= "ltv350qv",
-@@ -45,6 +78,18 @@ static struct spi_board_info spi0_board_info[] __initdata = {
- 		.mode		= SPI_MODE_3,
- 	},
- };
-+#endif
-+
-+#ifdef CONFIG_BOARD_ATSTK1002_SPI1
-+static struct spi_board_info spi1_board_info[] __initdata = { {
-+	/* patch in custom entries here */
-+} };
-+#endif
-+
-+static struct mci_platform_data __initdata mci0_data = {
-+	.detect_pin	= GPIO_PIN_NONE,
-+	.wp_pin		= GPIO_PIN_NONE,
-+};
- 
- /*
-  * The next two functions should go away as the boot loader is
-@@ -101,12 +146,103 @@ static void __init set_hw_addr(struct platform_device *pdev)
- 	clk_put(pclk);
- }
- 
--void __init setup_board(void)
-+#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
-+
-+static struct gpio_led stk_j2_led[] = {
-+#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
-+#define LEDSTRING "J2 jumpered to LED8"
-+	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
-+	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
-+	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
-+	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
-+	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
-+	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
-+	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
-+	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
-+			.default_trigger = "heartbeat", },
-+#else	/* RGB */
-+#define LEDSTRING "J2 jumpered to RGB LEDs"
-+	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
-+	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
-+	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
-+
-+	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
-+			.default_trigger = "heartbeat", },
-+	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
-+	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
-+			.default_trigger = "heartbeat", },
-+	/* PB16, PB30 unused */
-+#endif
-+};
-+
-+static struct gpio_led_platform_data stk_j2_led_data = {
-+	.num_leds	= ARRAY_SIZE(stk_j2_led),
-+	.leds		= stk_j2_led,
-+};
-+
-+static struct platform_device stk_j2_led_dev = {
-+	.name		= "leds-gpio",
-+	.id		= 2,	/* gpio block J2 */
-+	.dev		= {
-+		.platform_data	= &stk_j2_led_data,
-+	},
-+};
-+
-+static void setup_j2_leds(void)
- {
--#ifdef	SW2_DEFAULT
--	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
-+	unsigned	i;
-+
-+	for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
-+		at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
-+
-+	printk("STK1002: " LEDSTRING "\n");
-+	platform_device_register(&stk_j2_led_dev);
-+}
-+
- #else
-+static void setup_j2_leds(void)
-+{
-+}
-+#endif
-+
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+static void __init at73c213_set_clk(struct at73c213_board_info *info)
-+{
-+	struct clk *gclk;
-+	struct clk *pll;
-+
-+	gclk = clk_get(NULL, "gclk0");
-+	if (IS_ERR(gclk))
-+		goto err_gclk;
-+	pll = clk_get(NULL, "pll0");
-+	if (IS_ERR(pll))
-+		goto err_pll;
-+
-+	if (clk_set_parent(gclk, pll)) {
-+		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
-+		goto err_set_clk;
-+	}
-+
-+	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+	info->dac_clk = gclk;
-+
-+err_set_clk:
-+	clk_put(pll);
-+err_pll:
-+	clk_put(gclk);
-+err_gclk:
-+	return;
-+}
-+#endif
-+#endif
-+
-+void __init setup_board(void)
-+{
-+#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
- 	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
-+#else
-+	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
- #endif
- 	/* USART 2/unused: expansion connector */
- 	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
-@@ -140,18 +276,46 @@ static int __init atstk1002_init(void)
- 
- 	at32_add_system_devices();
- 
--#ifdef	SW2_DEFAULT
--	at32_add_device_usart(0);
--#else
-+#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
- 	at32_add_device_usart(1);
-+#else
-+	at32_add_device_usart(0);
- #endif
- 	at32_add_device_usart(2);
- 
-+#ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
- 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
--
--	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+#endif
-+#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
-+	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
-+#else
- 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- 			     fbmem_start, fbmem_size);
-+#endif
-+
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+#endif
-+#ifdef CONFIG_BOARD_ATSTK1002_SPI1
-+	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-+#endif
-+	at32_add_device_twi(0);
-+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-+	at32_add_device_mci(0, &mci0_data);
-+#endif
-+	at32_add_device_usba(0, NULL);
-+	at32_add_device_abdac(0);
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+	at32_add_device_ssc(0, ATMEL_SSC_TX);
-+#endif
-+
-+	setup_j2_leds();
-+
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+	at73c213_set_clk(&at73c213_data);
-+#endif
-+#endif
- 
- 	return 0;
- }
-diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
-index 49493ad..adce168 100644
---- a/arch/avr32/configs/atngw100_defconfig
-+++ b/arch/avr32/configs/atngw100_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22-rc5
--# Sat Jun 23 15:40:05 2007
-+# Linux kernel version: 2.6.22.atmel.1
-+# Thu Jul 12 17:49:20 2007
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -114,6 +114,7 @@ CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP7000=y
- # CONFIG_BOARD_ATSTK1000 is not set
- CONFIG_BOARD_ATNGW100=y
-+# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
- CONFIG_LOADER_U_BOOT=y
- 
- #
-@@ -122,6 +123,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -145,6 +147,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=0
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
-@@ -153,6 +156,27 @@ CONFIG_HZ=250
- CONFIG_CMDLINE=""
- 
- #
-+# Power managment options
-+#
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
- # Bus options
- #
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -187,13 +211,8 @@ CONFIG_NET_KEY=y
- # CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
- CONFIG_IP_MULTICAST=y
--CONFIG_IP_ADVANCED_ROUTER=y
--CONFIG_ASK_IP_FIB_HASH=y
--# CONFIG_IP_FIB_TRIE is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
- CONFIG_IP_FIB_HASH=y
--# CONFIG_IP_MULTIPLE_TABLES is not set
--# CONFIG_IP_ROUTE_MULTIPATH is not set
--# CONFIG_IP_ROUTE_VERBOSE is not set
- CONFIG_IP_PNP=y
- CONFIG_IP_PNP_DHCP=y
- # CONFIG_IP_PNP_BOOTP is not set
-@@ -240,6 +259,7 @@ CONFIG_IPV6_SIT=y
- # CONFIG_NETWORK_SECMARK is not set
- CONFIG_NETFILTER=y
- # CONFIG_NETFILTER_DEBUG is not set
-+CONFIG_BRIDGE_NETFILTER=y
- 
- #
- # Core Netfilter Configuration
-@@ -284,6 +304,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
- CONFIG_NETFILTER_XT_MATCH_MARK=m
- CONFIG_NETFILTER_XT_MATCH_POLICY=m
- CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
- CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
- CONFIG_NETFILTER_XT_MATCH_QUOTA=m
- CONFIG_NETFILTER_XT_MATCH_REALM=m
-@@ -359,13 +380,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
- CONFIG_IP6_NF_MANGLE=m
- CONFIG_IP6_NF_TARGET_HL=m
- CONFIG_IP6_NF_RAW=m
-+
-+#
-+# Bridge: Netfilter Configuration
-+#
-+# CONFIG_BRIDGE_NF_EBTABLES is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
-+CONFIG_BRIDGE=m
- CONFIG_VLAN_8021Q=m
- # CONFIG_DECNET is not set
-+CONFIG_LLC=m
- # CONFIG_LLC2 is not set
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
-@@ -521,7 +548,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # Misc devices
- #
--# CONFIG_BLINK is not set
- # CONFIG_IDE is not set
- 
- #
-@@ -545,13 +571,26 @@ CONFIG_NETDEVICES=y
- # CONFIG_BONDING is not set
- # CONFIG_EQUALIZER is not set
- CONFIG_TUN=m
--# CONFIG_PHYLIB is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_FIXED_PHY is not set
- 
- #
- # Ethernet (10 or 100Mbit)
- #
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_MII is not set
- CONFIG_MACB=y
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-@@ -625,7 +664,15 @@ CONFIG_UNIX98_PTYS=y
- # IPMI
- #
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
- # CONFIG_HW_RANDOM is not set
- # CONFIG_RTC is not set
- # CONFIG_GEN_RTC is not set
-@@ -636,7 +683,42 @@ CONFIG_UNIX98_PTYS=y
- # TPM devices
- #
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
- 
- #
- # SPI support
-@@ -655,7 +737,7 @@ CONFIG_SPI_ATMEL=y
- # SPI Protocol Masters
- #
- # CONFIG_SPI_AT25 is not set
--# CONFIG_SPI_SPIDEV is not set
-+CONFIG_SPI_SPIDEV=m
- 
- #
- # Dallas's 1-wire bus
-@@ -706,21 +788,59 @@ CONFIG_SPI_ATMEL=y
- #
- # USB Gadget Support
- #
--# CONFIG_USB_GADGET is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_ATMELMCI=y
- 
- #
- # LED devices
- #
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
- 
- #
- # LED drivers
- #
-+CONFIG_LEDS_GPIO=y
- 
- #
- # LED Triggers
- #
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
- 
- #
- # InfiniBand support
-@@ -733,7 +853,51 @@ CONFIG_SPI_ATMEL=y
- #
- # Real Time Clock
- #
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
- 
- #
- # DMA Engine support
-@@ -767,7 +931,8 @@ CONFIG_JBD=y
- # CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
--# CONFIG_INOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
- # CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
-@@ -922,7 +1087,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_ENABLE_MUST_CHECK=y
- CONFIG_MAGIC_SYSRQ=y
- # CONFIG_UNUSED_SYMBOLS is not set
--# CONFIG_DEBUG_FS is not set
-+CONFIG_DEBUG_FS=y
- # CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
- # CONFIG_DEBUG_SHIRQ is not set
-diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
-index 3b977fd..3708066 100644
---- a/arch/avr32/configs/atstk1002_defconfig
-+++ b/arch/avr32/configs/atstk1002_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22-rc5
--# Sat Jun 23 15:32:08 2007
-+# Linux kernel version: 2.6.22.atmel.2
-+# Thu Jul 19 13:46:47 2007
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -80,10 +80,10 @@ CONFIG_BASE_SMALL=1
- #
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
--# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
--# CONFIG_KMOD is not set
-+CONFIG_KMOD=y
- 
- #
- # Block layer
-@@ -99,12 +99,12 @@ CONFIG_BLOCK=y
- CONFIG_IOSCHED_NOOP=y
- # CONFIG_IOSCHED_AS is not set
- # CONFIG_IOSCHED_DEADLINE is not set
--# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_IOSCHED_CFQ=y
- # CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
--# CONFIG_DEFAULT_CFQ is not set
--CONFIG_DEFAULT_NOOP=y
--CONFIG_DEFAULT_IOSCHED="noop"
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
- 
- #
- # System Type and features
-@@ -117,6 +117,11 @@ CONFIG_CPU_AT32AP7000=y
- CONFIG_BOARD_ATSTK1002=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK1002_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
- CONFIG_LOADER_U_BOOT=y
- 
- #
-@@ -125,6 +130,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -148,6 +154,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=0
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
-@@ -156,6 +163,27 @@ CONFIG_HZ=250
- CONFIG_CMDLINE=""
- 
- #
-+# Power managment options
-+#
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
- # Bus options
- #
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -327,6 +355,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- # Self-contained MTD device drivers
- #
-+CONFIG_MTD_DATAFLASH=m
-+# CONFIG_MTD_M25P80 is not set
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -373,7 +403,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # Misc devices
- #
--# CONFIG_BLINK is not set
-+CONFIG_ATMEL_SSC=m
- # CONFIG_IDE is not set
- 
- #
-@@ -397,13 +427,26 @@ CONFIG_DUMMY=y
- # CONFIG_BONDING is not set
- # CONFIG_EQUALIZER is not set
- CONFIG_TUN=m
--# CONFIG_PHYLIB is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+CONFIG_LXT_PHY=y
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_FIXED_PHY is not set
- 
- #
- # Ethernet (10 or 100Mbit)
- #
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_MII is not set
- CONFIG_MACB=y
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-@@ -443,7 +486,42 @@ CONFIG_SLHC=m
- #
- # Input device support
- #
--# CONFIG_INPUT is not set
-+CONFIG_INPUT=m
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
- 
- #
- # Hardware I/O ports
-@@ -477,7 +555,15 @@ CONFIG_UNIX98_PTYS=y
- # IPMI
- #
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
- # CONFIG_HW_RANDOM is not set
- # CONFIG_RTC is not set
- # CONFIG_GEN_RTC is not set
-@@ -488,13 +574,61 @@ CONFIG_UNIX98_PTYS=y
- # TPM devices
- #
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
- 
- #
- # SPI support
- #
--# CONFIG_SPI is not set
--# CONFIG_SPI_MASTER is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
- 
- #
- # Dallas's 1-wire bus
-@@ -517,19 +651,91 @@ CONFIG_UNIX98_PTYS=y
- #
- # Graphics support
- #
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
- 
- #
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
- # CONFIG_VGASTATE is not set
--# CONFIG_FB is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_LOGO is not set
- 
- #
- # Sound
- #
--# CONFIG_SOUND is not set
-+CONFIG_SOUND=m
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+
-+#
-+# SPI devices
-+#
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-+
-+#
-+# System on Chip audio support
-+#
-+# CONFIG_SND_SOC is not set
-+
-+#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+
-+#
-+# HID Devices
-+#
-+# CONFIG_HID is not set
- 
- #
- # USB support
-@@ -545,21 +751,59 @@ CONFIG_UNIX98_PTYS=y
- #
- # USB Gadget Support
- #
--# CONFIG_USB_GADGET is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_ATMELMCI=y
- 
- #
- # LED devices
- #
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
- 
- #
- # LED drivers
- #
-+CONFIG_LEDS_GPIO=m
- 
- #
- # LED Triggers
- #
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
- 
- #
- # InfiniBand support
-@@ -572,7 +816,50 @@ CONFIG_UNIX98_PTYS=y
- #
- # Real Time Clock
- #
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_HCTOSYS is not set
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
- 
- #
- # DMA Engine support
-@@ -590,11 +877,14 @@ CONFIG_UNIX98_PTYS=y
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--# CONFIG_EXT3_FS is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
-@@ -609,7 +899,7 @@ CONFIG_INOTIFY_USER=y
- # CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
--# CONFIG_FUSE_FS is not set
-+CONFIG_FUSE_FS=m
- 
- #
- # CD-ROM/DVD Filesystems
-@@ -638,7 +928,7 @@ CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
- CONFIG_RAMFS=y
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
- 
- #
- # Miscellaneous filesystems
-@@ -683,8 +973,14 @@ CONFIG_SUNRPC=y
- # CONFIG_SUNRPC_BIND34 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
--# CONFIG_CIFS is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+CONFIG_CIFS=m
-+# CONFIG_CIFS_STATS is not set
-+# CONFIG_CIFS_WEAK_PW_HASH is not set
-+# CONFIG_CIFS_XATTR is not set
-+# CONFIG_CIFS_DEBUG2 is not set
-+# CONFIG_CIFS_EXPERIMENTAL is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
-diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
-new file mode 100644
-index 0000000..b429b75
---- /dev/null
-+++ b/arch/avr32/drivers/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC)			+= dw-dmac.o
-diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
-new file mode 100644
-index 0000000..224eb30
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.c
-@@ -0,0 +1,761 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+
-+#include "dw-dmac.h"
-+
-+#define DMAC_NR_CHANNELS 3
-+#define DMAC_MAX_BLOCKSIZE 4095
-+
-+enum {
-+	CH_STATE_FREE = 0,
-+	CH_STATE_ALLOCATED,
-+	CH_STATE_BUSY,
-+};
-+
-+struct dw_dma_lli {
-+	dma_addr_t	sar;
-+	dma_addr_t	dar;
-+	dma_addr_t	llp;
-+	u32		ctllo;
-+	u32		ctlhi;
-+	u32		sstat;
-+	u32		dstat;
-+};
-+
-+struct dw_dma_block {
-+	struct dw_dma_lli *lli_vaddr;
-+	dma_addr_t lli_dma_addr;
-+};
-+
-+struct dw_dma_channel {
-+	unsigned int state;
-+        int is_cyclic;
-+	struct dma_request_sg *req_sg;
-+	struct dma_request_cyclic *req_cyclic;
-+	unsigned int nr_blocks;
-+	int direction;
-+	struct dw_dma_block *block;
-+};
-+
-+struct dw_dma_controller {
-+	spinlock_t lock;
-+	void * __iomem	regs;
-+	struct dma_pool *lli_pool;
-+	struct clk *hclk;
-+	struct dma_controller dma;
-+	struct dw_dma_channel channel[DMAC_NR_CHANNELS];
-+};
-+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
-+
-+#define dmac_writel_hi(dmac, reg, value) \
-+	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_readl_hi(dmac, reg) \
-+	__raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_writel_lo(dmac, reg, value) \
-+	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
-+#define dmac_readl_lo(dmac, reg) \
-+	__raw_readl((dmac)->regs + DW_DMAC_##reg)
-+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
-+	__raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
-+			       + DW_DMAC_CHAN_##reg + 4))
-+#define dmac_chan_readl_hi(dmac, chan, reg) \
-+	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
-+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
-+	__raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define dmac_chan_readl_lo(dmac, chan, reg) \
-+	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define set_channel_bit(dmac, reg, chan) \
-+	dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
-+#define clear_channel_bit(dmac, reg, chan) \
-+	dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
-+
-+static int dmac_alloc_channel(struct dma_controller *_dmac)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&dmac->lock, flags);
-+	for (i = 0; i < DMAC_NR_CHANNELS; i++)
-+		if (dmac->channel[i].state == CH_STATE_FREE)
-+			break;
-+
-+	if (i < DMAC_NR_CHANNELS) {
-+		chan = &dmac->channel[i];
-+		chan->state = CH_STATE_ALLOCATED;
-+	} else {
-+		i = -EBUSY;
-+	}
-+
-+	spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+	return i;
-+}
-+
-+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS
-+	       || dmac->channel[channel].state != CH_STATE_ALLOCATED);
-+
-+	dmac->channel[channel].state = CH_STATE_FREE;
-+}
-+
-+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
-+					    unsigned int nr_blocks)
-+{
-+	struct dw_dma_block *block;
-+	void *p;
-+	unsigned int i;
-+
-+	block = kmalloc(nr_blocks * sizeof(*block),
-+			GFP_KERNEL);
-+	if (unlikely(!block))
-+		return NULL;
-+
-+	for (i = 0; i < nr_blocks; i++) {
-+		p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
-+				   &block[i].lli_dma_addr);
-+		block[i].lli_vaddr = p;
-+		if (unlikely(!p))
-+			goto fail;
-+	}
-+
-+	return block;
-+
-+fail:
-+	for (i = 0; i < nr_blocks; i++) {
-+		if (!block[i].lli_vaddr)
-+			break;
-+		dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
-+			      block[i].lli_dma_addr);
-+	}
-+	kfree(block);
-+	return NULL;
-+}
-+
-+static void cleanup_channel(struct dw_dma_controller *dmac,
-+			    struct dw_dma_channel *chan)
-+{
-+	unsigned int i;
-+
-+	if (chan->nr_blocks > 1) {
-+		for (i = 0; i < chan->nr_blocks; i++)
-+			dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
-+				      chan->block[i].lli_dma_addr);
-+		kfree(chan->block);
-+	}
-+
-+	chan->state = CH_STATE_ALLOCATED;
-+}
-+
-+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
-+				   struct dma_request_sg *req)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+	unsigned long ctlhi, ctllo, cfghi, cfglo;
-+	unsigned long block_size;
-+	unsigned int nr_blocks;
-+	int ret, i, direction;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&dmac->lock, flags);
-+
-+	ret = -EINVAL;
-+	if (req->req.channel >= DMAC_NR_CHANNELS
-+	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+	    || req->block_size > DMAC_MAX_BLOCKSIZE) {
-+		spin_unlock_irqrestore(&dmac->lock, flags);
-+		return -EINVAL;
-+	}
-+
-+	chan = &dmac->channel[req->req.channel];
-+	chan->state = CH_STATE_BUSY;
-+	chan->req_sg = req;
-+	chan->is_cyclic = 0;
-+
-+	/*
-+	 * We have marked the channel as busy, so no need to keep the
-+	 * lock as long as we only touch the channel-specific
-+	 * registers
-+	 */
-+	spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+	/*
-+	 * There may be limitations in the driver and/or the DMA
-+	 * controller that prevents us from sending a whole
-+	 * scatterlist item in one go.  Taking this into account,
-+	 * calculate the number of block transfers we need to set up.
-+	 *
-+	 * FIXME: Let the peripheral driver know about the maximum
-+	 * block size we support. We really don't want to use a
-+	 * different block size than what was suggested by the
-+	 * peripheral.
-+	 *
-+	 * Each block will get its own Linked List Item (LLI) below.
-+	 */
-+	block_size = req->block_size;
-+	nr_blocks = req->nr_blocks;
-+	pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
-+		 block_size, nr_blocks, req->nr_sg);
-+
-+	BUG_ON(nr_blocks == 0);
-+	chan->nr_blocks = nr_blocks;
-+
-+	ret = -EINVAL;
-+	cfglo = cfghi = 0;
-+	switch (req->direction) {
-+	case DMA_DIR_MEM_TO_PERIPH:
-+		direction = DMA_TO_DEVICE;
-+		cfghi = req->periph_id << (43 - 32);
-+		break;
-+
-+	case DMA_DIR_PERIPH_TO_MEM:
-+		direction = DMA_FROM_DEVICE;
-+		cfghi = req->periph_id << (39 - 32);
-+		break;
-+	default:
-+		goto out_unclaim_channel;
-+	}
-+
-+        chan->direction = direction;
-+
-+	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+	ctlhi = block_size >> req->width;
-+	ctllo = ((req->direction << 20)
-+		 // | (1 << 14) | (1 << 11) // source/dest burst trans len
-+		 | (req->width << 4) | (req->width << 1)
-+		 | (1 << 0));		 // interrupt enable
-+
-+	if (nr_blocks == 1) {
-+		/* Only one block: No need to use block chaining */
-+		if (direction == DMA_TO_DEVICE) {
-+			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+					    req->sg->dma_address);
-+			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+					    req->data_reg);
-+			ctllo |= 2 << 7; // no dst increment
-+		} else {
-+			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+					    req->data_reg);
-+			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+					    req->sg->dma_address);
-+			ctllo |= 2 << 9; // no src increment
-+		}
-+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
-+		dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
-+		pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
-+	} else {
-+		struct dw_dma_lli *lli, *lli_prev = NULL;
-+		int j = 0, offset = 0;
-+
-+		ret = -ENOMEM;
-+		chan->block = allocate_blocks(dmac, nr_blocks);
-+		if (!chan->block)
-+			goto out_unclaim_channel;
-+
-+		if (direction == DMA_TO_DEVICE)
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+		else
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+		/*
-+		 * Map scatterlist items to blocks. One scatterlist
-+		 * item may need more than one block for the reasons
-+		 * mentioned above.
-+		 */
-+		for (i = 0; i < nr_blocks; i++) {
-+			lli = chan->block[i].lli_vaddr;
-+			if (lli_prev) {
-+				lli_prev->llp = chan->block[i].lli_dma_addr;
-+				pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+					 i - 1, chan->block[i - 1].lli_vaddr,
-+					 chan->block[i - 1].lli_dma_addr,
-+					 lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+					 lli_prev->ctllo, lli_prev->ctlhi);
-+			}
-+			lli->llp = 0;
-+			lli->ctllo = ctllo;
-+			lli->ctlhi = ctlhi;
-+			if (direction == DMA_TO_DEVICE) {
-+				lli->sar = req->sg[j].dma_address + offset;
-+				lli->dar = req->data_reg;
-+			} else {
-+				lli->sar = req->data_reg;
-+				lli->dar = req->sg[j].dma_address + offset;
-+			}
-+			lli_prev = lli;
-+
-+			offset += block_size;
-+			if (offset > req->sg[j].length) {
-+				j++;
-+				offset = 0;
-+			}
-+		}
-+
-+		pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+			 i - 1, chan->block[i - 1].lli_vaddr,
-+			 chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+			 lli_prev->dar, lli_prev->llp,
-+			 lli_prev->ctllo, lli_prev->ctlhi);
-+
-+		/*
-+		 * SAR, DAR and CTL are initialized from the LLI. We
-+		 * only have to enable the LLI bits in CTL.
-+		 */
-+		dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
-+		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+				    chan->block[0].lli_dma_addr);
-+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+	}
-+
-+	set_channel_bit(dmac, MASK_XFER, req->req.channel);
-+	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+	if (req->req.block_complete)
-+		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+	else
-+		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+	return 0;
-+
-+out_unclaim_channel:
-+	chan->state = CH_STATE_ALLOCATED;
-+	return ret;
-+}
-+
-+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
-+                                       struct dma_request_cyclic *req)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+	unsigned long ctlhi, ctllo, cfghi, cfglo;
-+	unsigned long block_size;
-+	int ret, i, direction;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&dmac->lock, flags);
-+
-+        block_size = (req->buffer_size/req->periods) >> req->width;
-+
-+	ret = -EINVAL;
-+	if (req->req.channel >= DMAC_NR_CHANNELS
-+	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+            || (req->periods == 0)
-+	    || block_size > DMAC_MAX_BLOCKSIZE) {
-+		spin_unlock_irqrestore(&dmac->lock, flags);
-+		return -EINVAL;
-+	}
-+
-+	chan = &dmac->channel[req->req.channel];
-+	chan->state = CH_STATE_BUSY;
-+	chan->is_cyclic = 1;
-+        chan->req_cyclic = req;
-+
-+	/*
-+	 * We have marked the channel as busy, so no need to keep the
-+	 * lock as long as we only touch the channel-specific
-+	 * registers
-+	 */
-+	spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+	/*
-+          Setup
-+	 */
-+	BUG_ON(req->buffer_size % req->periods);
-+	/* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
-+
-+	chan->nr_blocks = req->periods;
-+
-+	ret = -EINVAL;
-+	cfglo = cfghi = 0;
-+	switch (req->direction) {
-+	case DMA_DIR_MEM_TO_PERIPH:
-+		direction = DMA_TO_DEVICE;
-+		cfghi = req->periph_id << (43 - 32);
-+		break;
-+
-+	case DMA_DIR_PERIPH_TO_MEM:
-+		direction = DMA_FROM_DEVICE;
-+		cfghi = req->periph_id << (39 - 32);
-+		break;
-+	default:
-+		goto out_unclaim_channel;
-+	}
-+
-+        chan->direction = direction;
-+
-+	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+	ctlhi = block_size;
-+	ctllo = ((req->direction << 20)
-+		 | (req->width << 4) | (req->width << 1)
-+		 | (1 << 0));		 // interrupt enable
-+
-+        {
-+		struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
-+
-+		ret = -ENOMEM;
-+		chan->block = allocate_blocks(dmac, req->periods);
-+		if (!chan->block)
-+			goto out_unclaim_channel;
-+
-+		if (direction == DMA_TO_DEVICE)
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+		else
-+			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+		/*
-+		 * Set up a linked list items where each period gets
-+		 * an item. The linked list item for the last period
-+		 * points back to the star of the buffer making a
-+		 * cyclic buffer.
-+		 */
-+		for (i = 0; i < req->periods; i++) {
-+			lli = chan->block[i].lli_vaddr;
-+			if (lli_prev) {
-+				lli_prev->llp = chan->block[i].lli_dma_addr;
-+				/* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+				   i - 1, chan->block[i - 1].lli_vaddr,
-+				   chan->block[i - 1].lli_dma_addr,
-+				   lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+				   lli_prev->ctllo, lli_prev->ctlhi);*/
-+			}
-+			lli->llp = 0;
-+			lli->ctllo = ctllo;
-+			lli->ctlhi = ctlhi;
-+			if (direction == DMA_TO_DEVICE) {
-+				lli->sar = req->buffer_start + i*(block_size << req->width);
-+				lli->dar = req->data_reg;
-+			} else {
-+				lli->sar = req->data_reg;
-+				lli->dar = req->buffer_start + i*(block_size << req->width);
-+			}
-+			lli_prev = lli;
-+		}
-+		lli->llp = chan->block[0].lli_dma_addr;
-+
-+		/*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+		  i - 1, chan->block[i - 1].lli_vaddr,
-+		  chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+		  lli_prev->dar, lli_prev->llp,
-+		  lli_prev->ctllo, lli_prev->ctlhi); */
-+
-+		/*
-+		 * SAR, DAR and CTL are initialized from the LLI. We
-+		 * only have to enable the LLI bits in CTL.
-+		 */
-+		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+				    chan->block[0].lli_dma_addr);
-+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+	}
-+
-+	clear_channel_bit(dmac, MASK_XFER, req->req.channel);
-+	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+	if (req->req.block_complete)
-+		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+	else
-+		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+	return 0;
-+
-+out_unclaim_channel:
-+	chan->state = CH_STATE_ALLOCATED;
-+	return ret;
-+}
-+
-+static int dmac_start_request(struct dma_controller *_dmac,
-+			      unsigned int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+	set_channel_bit(dmac, CH_EN, channel);
-+
-+	return 0;
-+}
-+
-+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
-+                                       unsigned int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+        dma_addr_t current_pos;
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+        chan = &dmac->channel[channel];
-+
-+	switch (chan->direction) {
-+	case DMA_TO_DEVICE:
-+		current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
-+		break;
-+	case DMA_FROM_DEVICE:
-+		current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
-+		break;
-+	default:
-+		return 0;
-+	}
-+
-+
-+        if (!current_pos) {
-+		if (chan->is_cyclic) {
-+			current_pos = chan->req_cyclic->buffer_start;
-+		} else {
-+			current_pos = chan->req_sg->sg->dma_address;
-+		}
-+	}
-+
-+	return current_pos;
-+}
-+
-+
-+static int dmac_stop_request(struct dma_controller *_dmac,
-+                             unsigned int channel)
-+{
-+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+	struct dw_dma_channel *chan;
-+
-+	BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+	chan = &dmac->channel[channel];
-+	pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
-+		 chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
-+		 dmac_chan_readl_lo(dmac, channel, DAR),
-+		 dmac_chan_readl_lo(dmac, channel, LLP),
-+		 dmac_chan_readl_hi(dmac, channel, CTL),
-+		 dmac_chan_readl_lo(dmac, channel, CTL));
-+
-+	if (chan->state == CH_STATE_BUSY) {
-+		clear_channel_bit(dmac, CH_EN, channel);
-+		cleanup_channel(dmac, &dmac->channel[channel]);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static void dmac_block_complete(struct dw_dma_controller *dmac)
-+{
-+	struct dw_dma_channel *chan;
-+	unsigned long status, chanid;
-+
-+	status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+
-+	while (status) {
-+		struct dma_request *req;
-+		chanid = __ffs(status);
-+		chan = &dmac->channel[chanid];
-+
-+                if (chan->is_cyclic) {
-+			BUG_ON(!chan->req_cyclic
-+			       || !chan->req_cyclic->req.block_complete);
-+			req = &chan->req_cyclic->req;
-+                } else {
-+			BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
-+			req = &chan->req_sg->req;
-+                }
-+		dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
-+		req->block_complete(req);
-+		status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+	}
-+}
-+
-+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
-+{
-+	struct dw_dma_channel *chan;
-+	struct dma_request *req;
-+	unsigned long status, chanid;
-+
-+	status = dmac_readl_lo(dmac, STATUS_XFER);
-+
-+	while (status) {
-+		chanid = __ffs(status);
-+		chan = &dmac->channel[chanid];
-+
-+		dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
-+
-+                req = &chan->req_sg->req;
-+                BUG_ON(!req);
-+                cleanup_channel(dmac, chan);
-+                if (req->xfer_complete)
-+			req->xfer_complete(req);
-+
-+		status = dmac_readl_lo(dmac, STATUS_XFER);
-+	}
-+}
-+
-+static void dmac_error(struct dw_dma_controller *dmac)
-+{
-+	struct dw_dma_channel *chan;
-+	unsigned long status, chanid;
-+
-+	status = dmac_readl_lo(dmac, STATUS_ERROR);
-+
-+	while (status) {
-+		struct dma_request *req;
-+
-+		chanid = __ffs(status);
-+		chan = &dmac->channel[chanid];
-+
-+		dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
-+		clear_channel_bit(dmac, CH_EN, chanid);
-+
-+                if (chan->is_cyclic) {
-+			BUG_ON(!chan->req_cyclic);
-+			req = &chan->req_cyclic->req;
-+                } else {
-+			BUG_ON(!chan->req_sg);
-+			req = &chan->req_sg->req;
-+                }
-+
-+		cleanup_channel(dmac, chan);
-+		if (req->error)
-+			req->error(req);
-+
-+		status = dmac_readl_lo(dmac, STATUS_XFER);
-+	}
-+}
-+
-+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
-+{
-+	struct dw_dma_controller *dmac = dev_id;
-+	unsigned long status;
-+	int ret = IRQ_NONE;
-+
-+	spin_lock(&dmac->lock);
-+
-+	status = dmac_readl_lo(dmac, STATUS_INT);
-+
-+	while (status) {
-+		ret = IRQ_HANDLED;
-+		if (status & 0x10)
-+			dmac_error(dmac);
-+		if (status & 0x02)
-+			dmac_block_complete(dmac);
-+		if (status & 0x01)
-+			dmac_xfer_complete(dmac);
-+
-+		status = dmac_readl_lo(dmac, STATUS_INT);
-+	}
-+
-+	spin_unlock(&dmac->lock);
-+	return ret;
-+}
-+
-+static int __devinit dmac_probe(struct platform_device *pdev)
-+{
-+	struct dw_dma_controller *dmac;
-+	struct resource *regs;
-+	int ret;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+
-+	dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
-+	if (!dmac)
-+		return -ENOMEM;
-+	memset(dmac, 0, sizeof(*dmac));
-+
-+	dmac->hclk = clk_get(&pdev->dev, "hclk");
-+	if (IS_ERR(dmac->hclk)) {
-+		ret = PTR_ERR(dmac->hclk);
-+		goto out_free_dmac;
-+	}
-+	clk_enable(dmac->hclk);
-+
-+	ret = -ENOMEM;
-+	dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
-+					 sizeof(struct dw_dma_lli), 4, 0);
-+	if (!dmac->lli_pool)
-+		goto out_disable_clk;
-+
-+	spin_lock_init(&dmac->lock);
-+	dmac->dma.dev = &pdev->dev;
-+	dmac->dma.alloc_channel = dmac_alloc_channel;
-+	dmac->dma.release_channel = dmac_release_channel;
-+	dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
-+	dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
-+	dmac->dma.start_request = dmac_start_request;
-+	dmac->dma.stop_request = dmac_stop_request;
-+	dmac->dma.get_current_pos = dmac_get_current_pos;
-+
-+	dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!dmac->regs)
-+		goto out_free_pool;
-+
-+	ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+			  IRQF_SAMPLE_RANDOM, pdev->name, dmac);
-+	if (ret)
-+		goto out_unmap_regs;
-+
-+	/* Enable the DMA controller */
-+	dmac_writel_lo(dmac, CFG, 1);
-+
-+	register_dma_controller(&dmac->dma);
-+
-+	printk(KERN_INFO
-+	       "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
-+	       dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
-+
-+	return 0;
-+
-+out_unmap_regs:
-+	iounmap(dmac->regs);
-+out_free_pool:
-+	dma_pool_destroy(dmac->lli_pool);
-+out_disable_clk:
-+	clk_disable(dmac->hclk);
-+	clk_put(dmac->hclk);
-+out_free_dmac:
-+	kfree(dmac);
-+	return ret;
-+}
-+
-+static struct platform_driver dmac_driver = {
-+	.probe		= dmac_probe,
-+	.driver		= {
-+		.name		= "dmaca",
-+	},
-+};
-+
-+static int __init dmac_init(void)
-+{
-+	return platform_driver_register(&dmac_driver);
-+}
-+subsys_initcall(dmac_init);
-+
-+static void __exit dmac_exit(void)
-+{
-+	platform_driver_unregister(&dmac_driver);
-+}
-+module_exit(dmac_exit);
-+
-+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
-new file mode 100644
-index 0000000..1f67921
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
-+
-+#define DW_DMAC_CFG		0x398
-+#define DW_DMAC_CH_EN		0x3a0
-+
-+#define DW_DMAC_STATUS_XFER	0x2e8
-+#define DW_DMAC_STATUS_BLOCK	0x2f0
-+#define DW_DMAC_STATUS_ERROR	0x308
-+
-+#define DW_DMAC_MASK_XFER	0x310
-+#define DW_DMAC_MASK_BLOCK	0x318
-+#define DW_DMAC_MASK_ERROR	0x330
-+
-+#define DW_DMAC_CLEAR_XFER	0x338
-+#define DW_DMAC_CLEAR_BLOCK	0x340
-+#define DW_DMAC_CLEAR_ERROR	0x358
-+
-+#define DW_DMAC_STATUS_INT	0x360
-+
-+#define DW_DMAC_CHAN_SAR	0x000
-+#define DW_DMAC_CHAN_DAR	0x008
-+#define DW_DMAC_CHAN_LLP	0x010
-+#define DW_DMAC_CHAN_CTL	0x018
-+#define DW_DMAC_CHAN_SSTAT	0x020
-+#define DW_DMAC_CHAN_DSTAT	0x028
-+#define DW_DMAC_CHAN_SSTATAR	0x030
-+#define DW_DMAC_CHAN_DSTATAR	0x038
-+#define DW_DMAC_CHAN_CFG	0x040
-+#define DW_DMAC_CHAN_SGR	0x048
-+#define DW_DMAC_CHAN_DSR	0x050
-+
-+#endif /* __AVR32_DW_DMAC_H__ */
-diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
-index 90e5aff..b6afc0c 100644
---- a/arch/avr32/kernel/Makefile
-+++ b/arch/avr32/kernel/Makefile
-@@ -9,6 +9,7 @@ obj-y				+= syscall_table.o syscall-stubs.o irq.o
- obj-y				+= setup.o traps.o semaphore.o ptrace.o
- obj-y				+= signal.o sys_avr32.o process.o time.o
- obj-y				+= init_task.o switch_to.o cpu.o
-+obj-y				+= dma-controller.o
- obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES)		+= kprobes.o
- 
-diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
-new file mode 100644
-index 0000000..fb654b3
---- /dev/null
-+++ b/arch/avr32/kernel/dma-controller.c
-@@ -0,0 +1,34 @@
-+/*
-+ * Preliminary DMA controller framework for AVR32
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/dma-controller.h>
-+
-+static LIST_HEAD(controllers);
-+
-+int register_dma_controller(struct dma_controller *dmac)
-+{
-+	static int next_id;
-+
-+	dmac->id = next_id++;
-+	list_add_tail(&dmac->list, &controllers);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(register_dma_controller);
-+
-+struct dma_controller *find_dma_controller(int id)
-+{
-+	struct dma_controller *dmac;
-+
-+	list_for_each_entry(dmac, &controllers, list)
-+		if (dmac->id == id)
-+			return dmac;
-+	return NULL;
-+}
-+EXPORT_SYMBOL(find_dma_controller);
-diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
-index b279d66..d08b0bc 100644
---- a/arch/avr32/kernel/setup.c
-+++ b/arch/avr32/kernel/setup.c
-@@ -313,7 +313,7 @@ __tagtable(ATAG_MEM, parse_tag_mem);
- 
- static int __init parse_tag_rdimg(struct tag *tag)
- {
--#ifdef CONFIG_INITRD
-+#ifdef CONFIG_BLK_DEV_INITRD
- 	struct tag_mem_range *mem = &tag->u.mem_range;
- 	int ret;
- 
-@@ -323,7 +323,7 @@ static int __init parse_tag_rdimg(struct tag *tag)
- 		return 0;
- 	}
- 
--	ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
-+	ret = add_reserved_region(mem->addr, mem->addr + mem->size - 1,
- 				  "initrd");
- 	if (ret) {
- 		printk(KERN_WARNING
-diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
-index eb30783..43c5b9f 100644
---- a/arch/avr32/mach-at32ap/Kconfig
-+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -26,6 +26,13 @@ config AP7000_8_BIT_SMC
- 
- endchoice
- 
-+config GPIO_DEV
-+	bool "GPIO /dev interface"
-+	select CONFIGFS_FS
-+	default n
-+	help
-+	  Say `Y' to enable a /dev interface to the GPIO pins.
-+
- endmenu
- 
- endif # PLATFORM_AT32AP
-diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
-index f1d3957..250372a 100644
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -1,3 +1,5 @@
- obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
- obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
- obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
-+obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
-+obj-$(CONFIG_GPIO_DEV)		+= gpio-dev.o
-diff --git a/arch/avr32/mach-at32ap/at32ap.c b/arch/avr32/mach-at32ap/at32ap.c
-index 90f207e..7c4987f 100644
---- a/arch/avr32/mach-at32ap/at32ap.c
-+++ b/arch/avr32/mach-at32ap/at32ap.c
-@@ -11,41 +11,10 @@
- #include <linux/init.h>
- #include <linux/platform_device.h>
- 
--#include <asm/io.h>
--
- #include <asm/arch/init.h>
--#include <asm/arch/sm.h>
--
--struct at32_sm system_manager;
--
--static int __init at32_sm_init(void)
--{
--	struct resource *regs;
--	struct at32_sm *sm = &system_manager;
--	int ret = -ENXIO;
--
--	regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
--	if (!regs)
--		goto fail;
--
--	spin_lock_init(&sm->lock);
--	sm->pdev = &at32_sm_device;
--
--	ret = -ENOMEM;
--	sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
--	if (!sm->regs)
--		goto fail;
--
--	return 0;
--
--fail:
--	printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
--	return ret;
--}
- 
- void __init setup_platform(void)
- {
--	at32_sm_init();
- 	at32_clock_init();
- 	at32_portmux_init();
- }
-diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
-index 4dda42d..1130c8a 100644
---- a/arch/avr32/mach-at32ap/at32ap7000.c
-+++ b/arch/avr32/mach-at32ap/at32ap7000.c
-@@ -17,14 +17,20 @@
- #include <asm/arch/at32ap7000.h>
- #include <asm/arch/board.h>
- #include <asm/arch/portmux.h>
--#include <asm/arch/sm.h>
- 
- #include <video/atmel_lcdc.h>
- 
- #include "clock.h"
- #include "hmatrix.h"
- #include "pio.h"
--#include "sm.h"
-+#include "pm.h"
-+
-+/*
-+ * We can reduce the code size a bit by using a constant here. Since
-+ * this file is completely chip-specific, it's safe to not use
-+ * ioremap. Generic drivers should of course never do this.
-+ */
-+#define AT32_PM_BASE	0xfff00000
- 
- #define PBMEM(base)					\
- 	{						\
-@@ -88,6 +94,8 @@ static struct clk devname##_##_name = {				\
- 	.index		= _index,				\
- }
- 
-+static DEFINE_SPINLOCK(pm_lock);
-+
- unsigned long at32ap7000_osc_rates[3] = {
- 	[0] = 32768,
- 	/* FIXME: these are ATSTK1002-specific */
-@@ -104,11 +112,11 @@ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
- {
- 	unsigned long div, mul, rate;
- 
--	if (!(control & SM_BIT(PLLEN)))
-+	if (!(control & PM_BIT(PLLEN)))
- 		return 0;
- 
--	div = SM_BFEXT(PLLDIV, control) + 1;
--	mul = SM_BFEXT(PLLMUL, control) + 1;
-+	div = PM_BFEXT(PLLDIV, control) + 1;
-+	mul = PM_BFEXT(PLLMUL, control) + 1;
- 
- 	rate = clk->parent->get_rate(clk->parent);
- 	rate = (rate + div / 2) / div;
-@@ -121,7 +129,7 @@ static unsigned long pll0_get_rate(struct clk *clk)
- {
- 	u32 control;
- 
--	control = sm_readl(&system_manager, PM_PLL0);
-+	control = pm_readl(PLL0);
- 
- 	return pll_get_rate(clk, control);
- }
-@@ -130,7 +138,7 @@ static unsigned long pll1_get_rate(struct clk *clk)
- {
- 	u32 control;
- 
--	control = sm_readl(&system_manager, PM_PLL1);
-+	control = pm_readl(PLL1);
- 
- 	return pll_get_rate(clk, control);
- }
-@@ -187,108 +195,139 @@ static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
- 
- static void cpu_clk_mode(struct clk *clk, int enabled)
- {
--	struct at32_sm *sm = &system_manager;
- 	unsigned long flags;
- 	u32 mask;
- 
--	spin_lock_irqsave(&sm->lock, flags);
--	mask = sm_readl(sm, PM_CPU_MASK);
-+	spin_lock_irqsave(&pm_lock, flags);
-+	mask = pm_readl(CPU_MASK);
- 	if (enabled)
- 		mask |= 1 << clk->index;
- 	else
- 		mask &= ~(1 << clk->index);
--	sm_writel(sm, PM_CPU_MASK, mask);
--	spin_unlock_irqrestore(&sm->lock, flags);
-+	pm_writel(CPU_MASK, mask);
-+	spin_unlock_irqrestore(&pm_lock, flags);
- }
- 
- static unsigned long cpu_clk_get_rate(struct clk *clk)
- {
- 	unsigned long cksel, shift = 0;
- 
--	cksel = sm_readl(&system_manager, PM_CKSEL);
--	if (cksel & SM_BIT(CPUDIV))
--		shift = SM_BFEXT(CPUSEL, cksel) + 1;
-+	cksel = pm_readl(CKSEL);
-+	if (cksel & PM_BIT(CPUDIV))
-+		shift = PM_BFEXT(CPUSEL, cksel) + 1;
- 
- 	return bus_clk_get_rate(clk, shift);
- }
- 
-+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+	u32 control;
-+	unsigned long parent_rate, child_div, actual_rate, div;
-+
-+	parent_rate = clk->parent->get_rate(clk->parent);
-+	control = pm_readl(CKSEL);
-+
-+	if (control & PM_BIT(HSBDIV))
-+		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
-+	else
-+		child_div = 1;
-+
-+	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
-+		actual_rate = parent_rate;
-+		control &= ~PM_BIT(CPUDIV);
-+	} else {
-+		unsigned int cpusel;
-+		div = (parent_rate + rate / 2) / rate;
-+		if (div > child_div)
-+			div = child_div;
-+		cpusel = (div > 1) ? (fls(div) - 2) : 0;
-+		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
-+		actual_rate = parent_rate / (1 << (cpusel + 1));
-+	}
-+
-+	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-+			clk->name, rate, actual_rate);
-+
-+	if (apply)
-+		pm_writel(CKSEL, control);
-+
-+	return actual_rate;
-+}
-+
- static void hsb_clk_mode(struct clk *clk, int enabled)
- {
--	struct at32_sm *sm = &system_manager;
- 	unsigned long flags;
- 	u32 mask;
- 
--	spin_lock_irqsave(&sm->lock, flags);
--	mask = sm_readl(sm, PM_HSB_MASK);
-+	spin_lock_irqsave(&pm_lock, flags);
-+	mask = pm_readl(HSB_MASK);
- 	if (enabled)
- 		mask |= 1 << clk->index;
- 	else
- 		mask &= ~(1 << clk->index);
--	sm_writel(sm, PM_HSB_MASK, mask);
--	spin_unlock_irqrestore(&sm->lock, flags);
-+	pm_writel(HSB_MASK, mask);
-+	spin_unlock_irqrestore(&pm_lock, flags);
- }
- 
- static unsigned long hsb_clk_get_rate(struct clk *clk)
- {
- 	unsigned long cksel, shift = 0;
- 
--	cksel = sm_readl(&system_manager, PM_CKSEL);
--	if (cksel & SM_BIT(HSBDIV))
--		shift = SM_BFEXT(HSBSEL, cksel) + 1;
-+	cksel = pm_readl(CKSEL);
-+	if (cksel & PM_BIT(HSBDIV))
-+		shift = PM_BFEXT(HSBSEL, cksel) + 1;
- 
- 	return bus_clk_get_rate(clk, shift);
- }
- 
- static void pba_clk_mode(struct clk *clk, int enabled)
- {
--	struct at32_sm *sm = &system_manager;
- 	unsigned long flags;
- 	u32 mask;
- 
--	spin_lock_irqsave(&sm->lock, flags);
--	mask = sm_readl(sm, PM_PBA_MASK);
-+	spin_lock_irqsave(&pm_lock, flags);
-+	mask = pm_readl(PBA_MASK);
- 	if (enabled)
- 		mask |= 1 << clk->index;
- 	else
- 		mask &= ~(1 << clk->index);
--	sm_writel(sm, PM_PBA_MASK, mask);
--	spin_unlock_irqrestore(&sm->lock, flags);
-+	pm_writel(PBA_MASK, mask);
-+	spin_unlock_irqrestore(&pm_lock, flags);
- }
- 
- static unsigned long pba_clk_get_rate(struct clk *clk)
- {
- 	unsigned long cksel, shift = 0;
- 
--	cksel = sm_readl(&system_manager, PM_CKSEL);
--	if (cksel & SM_BIT(PBADIV))
--		shift = SM_BFEXT(PBASEL, cksel) + 1;
-+	cksel = pm_readl(CKSEL);
-+	if (cksel & PM_BIT(PBADIV))
-+		shift = PM_BFEXT(PBASEL, cksel) + 1;
- 
- 	return bus_clk_get_rate(clk, shift);
- }
- 
- static void pbb_clk_mode(struct clk *clk, int enabled)
- {
--	struct at32_sm *sm = &system_manager;
- 	unsigned long flags;
- 	u32 mask;
- 
--	spin_lock_irqsave(&sm->lock, flags);
--	mask = sm_readl(sm, PM_PBB_MASK);
-+	spin_lock_irqsave(&pm_lock, flags);
-+	mask = pm_readl(PBB_MASK);
- 	if (enabled)
- 		mask |= 1 << clk->index;
- 	else
- 		mask &= ~(1 << clk->index);
--	sm_writel(sm, PM_PBB_MASK, mask);
--	spin_unlock_irqrestore(&sm->lock, flags);
-+	pm_writel(PBB_MASK, mask);
-+	spin_unlock_irqrestore(&pm_lock, flags);
- }
- 
- static unsigned long pbb_clk_get_rate(struct clk *clk)
- {
- 	unsigned long cksel, shift = 0;
- 
--	cksel = sm_readl(&system_manager, PM_CKSEL);
--	if (cksel & SM_BIT(PBBDIV))
--		shift = SM_BFEXT(PBBSEL, cksel) + 1;
-+	cksel = pm_readl(CKSEL);
-+	if (cksel & PM_BIT(PBBDIV))
-+		shift = PM_BFEXT(PBBSEL, cksel) + 1;
- 
- 	return bus_clk_get_rate(clk, shift);
- }
-@@ -296,6 +335,7 @@ static unsigned long pbb_clk_get_rate(struct clk *clk)
- static struct clk cpu_clk = {
- 	.name		= "cpu",
- 	.get_rate	= cpu_clk_get_rate,
-+	.set_rate	= cpu_clk_set_rate,
- 	.users		= 1,
- };
- static struct clk hsb_clk = {
-@@ -327,12 +367,12 @@ static void genclk_mode(struct clk *clk, int enabled)
- {
- 	u32 control;
- 
--	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-+	control = pm_readl(GCCTRL(clk->index));
- 	if (enabled)
--		control |= SM_BIT(CEN);
-+		control |= PM_BIT(CEN);
- 	else
--		control &= ~SM_BIT(CEN);
--	sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
-+		control &= ~PM_BIT(CEN);
-+	pm_writel(GCCTRL(clk->index), control);
- }
- 
- static unsigned long genclk_get_rate(struct clk *clk)
-@@ -340,9 +380,9 @@ static unsigned long genclk_get_rate(struct clk *clk)
- 	u32 control;
- 	unsigned long div = 1;
- 
--	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
--	if (control & SM_BIT(DIVEN))
--		div = 2 * (SM_BFEXT(DIV, control) + 1);
-+	control = pm_readl(GCCTRL(clk->index));
-+	if (control & PM_BIT(DIVEN))
-+		div = 2 * (PM_BFEXT(DIV, control) + 1);
- 
- 	return clk->parent->get_rate(clk->parent) / div;
- }
-@@ -353,23 +393,22 @@ static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
- 	unsigned long parent_rate, actual_rate, div;
- 
- 	parent_rate = clk->parent->get_rate(clk->parent);
--	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-+	control = pm_readl(GCCTRL(clk->index));
- 
- 	if (rate > 3 * parent_rate / 4) {
- 		actual_rate = parent_rate;
--		control &= ~SM_BIT(DIVEN);
-+		control &= ~PM_BIT(DIVEN);
- 	} else {
- 		div = (parent_rate + rate) / (2 * rate) - 1;
--		control = SM_BFINS(DIV, div, control) | SM_BIT(DIVEN);
-+		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
- 		actual_rate = parent_rate / (2 * (div + 1));
- 	}
- 
--	printk("clk %s: new rate %lu (actual rate %lu)\n",
--	       clk->name, rate, actual_rate);
-+	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
-+		clk->name, rate, actual_rate);
- 
- 	if (apply)
--		sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index,
--			  control);
-+		pm_writel(GCCTRL(clk->index), control);
- 
- 	return actual_rate;
- }
-@@ -378,24 +417,24 @@ int genclk_set_parent(struct clk *clk, struct clk *parent)
- {
- 	u32 control;
- 
--	printk("clk %s: new parent %s (was %s)\n",
--	       clk->name, parent->name, clk->parent->name);
-+	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
-+		clk->name, parent->name, clk->parent->name);
- 
--	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-+	control = pm_readl(GCCTRL(clk->index));
- 
- 	if (parent == &osc1 || parent == &pll1)
--		control |= SM_BIT(OSCSEL);
-+		control |= PM_BIT(OSCSEL);
- 	else if (parent == &osc0 || parent == &pll0)
--		control &= ~SM_BIT(OSCSEL);
-+		control &= ~PM_BIT(OSCSEL);
- 	else
- 		return -EINVAL;
- 
- 	if (parent == &pll0 || parent == &pll1)
--		control |= SM_BIT(PLLSEL);
-+		control |= PM_BIT(PLLSEL);
- 	else
--		control &= ~SM_BIT(PLLSEL);
-+		control &= ~PM_BIT(PLLSEL);
- 
--	sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
-+	pm_writel(GCCTRL(clk->index), control);
- 	clk->parent = parent;
- 
- 	return 0;
-@@ -408,11 +447,11 @@ static void __init genclk_init_parent(struct clk *clk)
- 
- 	BUG_ON(clk->index > 7);
- 
--	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
--	if (control & SM_BIT(OSCSEL))
--		parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1;
-+	control = pm_readl(GCCTRL(clk->index));
-+	if (control & PM_BIT(OSCSEL))
-+		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
- 	else
--		parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0;
-+		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
- 
- 	clk->parent = parent;
- }
-@@ -420,21 +459,53 @@ static void __init genclk_init_parent(struct clk *clk)
- /* --------------------------------------------------------------------
-  *  System peripherals
-  * -------------------------------------------------------------------- */
--static struct resource sm_resource[] = {
--	PBMEM(0xfff00000),
--	NAMED_IRQ(19, "eim"),
--	NAMED_IRQ(20, "pm"),
--	NAMED_IRQ(21, "rtc"),
--};
--struct platform_device at32_sm_device = {
--	.name		= "sm",
--	.id		= 0,
--	.resource	= sm_resource,
--	.num_resources	= ARRAY_SIZE(sm_resource),
-+static struct resource at32_pm0_resource[] = {
-+	{
-+		.start	= 0xfff00000,
-+		.end	= 0xfff0007f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(20),
- };
--static struct clk at32_sm_pclk = {
-+
-+static struct resource at32ap700x_rtc0_resource[] = {
-+	{
-+		.start	= 0xfff00080,
-+		.end	= 0xfff000af,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(21),
-+};
-+
-+static struct resource at32_wdt0_resource[] = {
-+	{
-+		.start	= 0xfff000b0,
-+		.end	= 0xfff000bf,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct resource at32_eic0_resource[] = {
-+	{
-+		.start	= 0xfff00100,
-+		.end	= 0xfff0013f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(19),
-+};
-+
-+DEFINE_DEV(at32_pm, 0);
-+DEFINE_DEV(at32ap700x_rtc, 0);
-+DEFINE_DEV(at32_wdt, 0);
-+DEFINE_DEV(at32_eic, 0);
-+
-+/*
-+ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
-+ * is always running.
-+ */
-+static struct clk at32_pm_pclk = {
- 	.name		= "pclk",
--	.dev		= &at32_sm_device.dev,
-+	.dev		= &at32_pm0_device.dev,
- 	.parent		= &pbb_clk,
- 	.mode		= pbb_clk_mode,
- 	.get_rate	= pbb_clk_get_rate,
-@@ -491,6 +562,17 @@ static struct clk pico_clk = {
- 	.users		= 1,
- };
- 
-+static struct resource dmaca0_resource[] = {
-+	{
-+		.start	= 0xff200000,
-+		.end	= 0xff20ffff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(2),
-+};
-+DEFINE_DEV(dmaca, 0);
-+DEV_CLK(hclk, dmaca0, hsb, 10);
-+
- /* --------------------------------------------------------------------
-  * HMATRIX
-  * -------------------------------------------------------------------- */
-@@ -583,12 +665,14 @@ DEV_CLK(mck, pio4, pba, 14);
- 
- void __init at32_add_system_devices(void)
- {
--	system_manager.eim_first_irq = EIM_IRQ_BASE;
--
--	platform_device_register(&at32_sm_device);
-+	platform_device_register(&at32_pm0_device);
- 	platform_device_register(&at32_intc0_device);
-+	platform_device_register(&at32ap700x_rtc0_device);
-+	platform_device_register(&at32_wdt0_device);
-+	platform_device_register(&at32_eic0_device);
- 	platform_device_register(&smc0_device);
- 	platform_device_register(&pdc_device);
-+	platform_device_register(&dmaca0_device);
- 
- 	platform_device_register(&at32_systc0_device);
- 
-@@ -894,6 +978,83 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- }
- 
- /* --------------------------------------------------------------------
-+ *  TWI
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource atmel_twi0_resource[] = {
-+	PBMEM(0xffe00800),
-+	IRQ(5),
-+};
-+DEFINE_DEV(atmel_twi, 0);
-+DEV_CLK(pclk,atmel_twi0,pba,2);
-+
-+struct platform_device *__init
-+at32_add_device_twi(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &atmel_twi0_device;
-+		select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
-+		select_peripheral(PA(7),  PERIPH_A, 0);	/* SCL	*/
-+		break;
-+
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * MMC
-+ * -------------------------------------------------------------------- */
-+static struct mci_platform_data atmel_mci0_data = {
-+	.detect_pin	= GPIO_PIN_NONE,
-+	.wp_pin		= GPIO_PIN_NONE,
-+};
-+static struct resource atmel_mci0_resource[] = {
-+	PBMEM(0xfff02400),
-+	IRQ(28),
-+};
-+DEFINE_DEV_DATA(atmel_mci, 0);
-+DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
-+
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &atmel_mci0_device;
-+		select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
-+		select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
-+		select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
-+		select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
-+		select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
-+		select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	if (data) {
-+		if (data->detect_pin != GPIO_PIN_NONE)
-+			at32_select_gpio(data->detect_pin, 0);
-+		if (data->wp_pin != GPIO_PIN_NONE)
-+			at32_select_gpio(data->wp_pin, 0);
-+		memcpy(pdev->dev.platform_data, data,
-+		       sizeof(struct mci_platform_data));
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-  *  LCDC
-  * -------------------------------------------------------------------- */
- static struct atmel_lcdfb_info atmel_lcdfb0_data;
-@@ -1013,6 +1174,228 @@ err_dup_modedb:
- }
- 
- /* --------------------------------------------------------------------
-+ *  USB Device Controller
-+ * -------------------------------------------------------------------- */
-+static struct resource usba0_resource[] __initdata = {
-+	{
-+		.name		= "fifo",
-+		.start		= 0xff300000,
-+		.end		= 0xff3fffff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.name		= "regs",
-+		.start		= 0xfff03000,
-+		.end		= 0xfff033ff,
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	IRQ(31),
-+};
-+static struct clk usba0_pclk = {
-+	.name		= "pclk",
-+	.parent		= &pbb_clk,
-+	.mode		= pbb_clk_mode,
-+	.get_rate	= pbb_clk_get_rate,
-+	.index		= 12,
-+};
-+static struct clk usba0_hclk = {
-+	.name		= "hclk",
-+	.parent		= &hsb_clk,
-+	.mode		= hsb_clk_mode,
-+	.get_rate	= hsb_clk_get_rate,
-+	.index		= 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
-+{
-+	struct platform_device *pdev;
-+
-+	if (id != 0)
-+		return NULL;
-+
-+	pdev = platform_device_alloc("atmel_usba_udc", 0);
-+	if (!pdev)
-+		return NULL;
-+
-+	if (platform_device_add_resources(pdev, usba0_resource,
-+					  ARRAY_SIZE(usba0_resource)))
-+		goto out_free_pdev;
-+
-+	if (data) {
-+		if (platform_device_add_data(pdev, data, sizeof(*data)))
-+			goto out_free_pdev;
-+
-+		if (data->vbus_pin != GPIO_PIN_NONE)
-+			at32_select_gpio(data->vbus_pin, 0);
-+	}
-+
-+	usba0_pclk.dev = &pdev->dev;
-+	usba0_hclk.dev = &pdev->dev;
-+
-+	platform_device_add(pdev);
-+
-+	return pdev;
-+
-+out_free_pdev:
-+	platform_device_put(pdev);
-+	return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  SSC
-+ * -------------------------------------------------------------------- */
-+static struct resource ssc0_resource[] = {
-+	PBMEM(0xffe01c00),
-+	IRQ(10),
-+};
-+DEFINE_DEV(ssc, 0);
-+DEV_CLK(pclk, ssc0, pba, 7);
-+
-+static struct resource ssc1_resource[] = {
-+	PBMEM(0xffe02000),
-+	IRQ(11),
-+};
-+DEFINE_DEV(ssc, 1);
-+DEV_CLK(pclk, ssc1, pba, 8);
-+
-+static struct resource ssc2_resource[] = {
-+	PBMEM(0xffe02400),
-+	IRQ(12),
-+};
-+DEFINE_DEV(ssc, 2);
-+DEV_CLK(pclk, ssc2, pba, 9);
-+
-+struct platform_device *__init
-+at32_add_device_ssc(unsigned int id, unsigned int flags)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &ssc0_device;
-+		if (flags & ATMEL_SSC_RF)
-+			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
-+		if (flags & ATMEL_SSC_RK)
-+			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
-+		if (flags & ATMEL_SSC_TK)
-+			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
-+		if (flags & ATMEL_SSC_TF)
-+			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
-+		if (flags & ATMEL_SSC_TD)
-+			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
-+		if (flags & ATMEL_SSC_RD)
-+			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
-+		break;
-+	case 1:
-+		pdev = &ssc1_device;
-+		if (flags & ATMEL_SSC_RF)
-+			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
-+		if (flags & ATMEL_SSC_RK)
-+			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
-+		if (flags & ATMEL_SSC_TK)
-+			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
-+		if (flags & ATMEL_SSC_TF)
-+			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
-+		if (flags & ATMEL_SSC_TD)
-+			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
-+		if (flags & ATMEL_SSC_RD)
-+			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
-+		break;
-+	case 2:
-+		pdev = &ssc2_device;
-+		if (flags & ATMEL_SSC_TD)
-+			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
-+		if (flags & ATMEL_SSC_RD)
-+			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
-+		if (flags & ATMEL_SSC_TK)
-+			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
-+		if (flags & ATMEL_SSC_TF)
-+			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
-+		if (flags & ATMEL_SSC_RF)
-+			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
-+		if (flags & ATMEL_SSC_RK)
-+			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  AC97C
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_ac97c0_resource[] = {
-+	PBMEM(0xfff02800),
-+	IRQ(29),
-+};
-+DEFINE_DEV(atmel_ac97c, 0);
-+DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
-+
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &atmel_ac97c0_device;
-+		select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
-+		select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
-+		select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
-+		select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  DAC
-+ * -------------------------------------------------------------------- */
-+static struct resource abdac0_resource[] = {
-+	PBMEM(0xfff02000),
-+	IRQ(27),
-+};
-+DEFINE_DEV(abdac, 0);
-+DEV_CLK(pclk, abdac0, pbb, 8);
-+static struct clk abdac0_sample_clk = {
-+	.name           = "sample_clk",
-+	.dev            = &abdac0_device.dev,
-+	.mode           = genclk_mode,
-+	.get_rate       = genclk_get_rate,
-+	.set_rate       = genclk_set_rate,
-+	.set_parent     = genclk_set_parent,
-+	.index          = 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_abdac(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &abdac0_device;
-+		select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
-+		select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
-+		select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
-+		select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-  *  GCLK
-  * -------------------------------------------------------------------- */
- static struct clk gclk0 = {
-@@ -1066,7 +1449,7 @@ struct clk *at32_clock_list[] = {
- 	&hsb_clk,
- 	&pba_clk,
- 	&pbb_clk,
--	&at32_sm_pclk,
-+	&at32_pm_pclk,
- 	&at32_intc0_pclk,
- 	&hmatrix_clk,
- 	&ebi_clk,
-@@ -1075,6 +1458,7 @@ struct clk *at32_clock_list[] = {
- 	&smc0_mck,
- 	&pdc_hclk,
- 	&pdc_pclk,
-+	&dmaca0_hclk,
- 	&pico_clk,
- 	&pio0_mck,
- 	&pio1_mck,
-@@ -1092,8 +1476,18 @@ struct clk *at32_clock_list[] = {
- 	&macb1_pclk,
- 	&atmel_spi0_spi_clk,
- 	&atmel_spi1_spi_clk,
-+	&atmel_twi0_pclk,
-+	&atmel_mci0_mci_clk,
- 	&atmel_lcdfb0_hck1,
- 	&atmel_lcdfb0_pixclk,
-+	&usba0_pclk,
-+	&usba0_hclk,
-+	&ssc0_pclk,
-+	&ssc1_pclk,
-+	&ssc2_pclk,
-+	&atmel_ac97c0_pclk,
-+	&abdac0_pclk,
-+	&abdac0_sample_clk,
- 	&gclk0,
- 	&gclk1,
- 	&gclk2,
-@@ -1113,18 +1507,20 @@ void __init at32_portmux_init(void)
- 
- void __init at32_clock_init(void)
- {
--	struct at32_sm *sm = &system_manager;
- 	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
- 	int i;
- 
--	if (sm_readl(sm, PM_MCCTRL) & SM_BIT(PLLSEL))
-+	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
- 		main_clock = &pll0;
--	else
-+		cpu_clk.parent = &pll0;
-+	} else {
- 		main_clock = &osc0;
-+		cpu_clk.parent = &osc0;
-+	}
- 
--	if (sm_readl(sm, PM_PLL0) & SM_BIT(PLLOSC))
-+	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
- 		pll0.parent = &osc1;
--	if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC))
-+	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
- 		pll1.parent = &osc1;
- 
- 	genclk_init_parent(&gclk0);
-@@ -1133,6 +1529,7 @@ void __init at32_clock_init(void)
- 	genclk_init_parent(&gclk3);
- 	genclk_init_parent(&gclk4);
- 	genclk_init_parent(&atmel_lcdfb0_pixclk);
-+	genclk_init_parent(&abdac0_sample_clk);
- 
- 	/*
- 	 * Turn on all clocks that have at least one user already, and
-@@ -1157,8 +1554,8 @@ void __init at32_clock_init(void)
- 			pbb_mask |= 1 << clk->index;
- 	}
- 
--	sm_writel(sm, PM_CPU_MASK, cpu_mask);
--	sm_writel(sm, PM_HSB_MASK, hsb_mask);
--	sm_writel(sm, PM_PBA_MASK, pba_mask);
--	sm_writel(sm, PM_PBB_MASK, pbb_mask);
-+	pm_writel(CPU_MASK, cpu_mask);
-+	pm_writel(HSB_MASK, hsb_mask);
-+	pm_writel(PBA_MASK, pba_mask);
-+	pm_writel(PBB_MASK, pbb_mask);
- }
-diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
-new file mode 100644
-index 0000000..235524b
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/cpufreq.c
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright (C) 2004-2007 Atmel Corporation
-+ *
-+ * Based on MIPS implementation arch/mips/kernel/time.c
-+ *   Copyright 2001 MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+/*#define DEBUG*/
-+
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/cpufreq.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <asm/system.h>
-+
-+static struct clk *cpuclk;
-+
-+static int at32_verify_speed(struct cpufreq_policy *policy)
-+{
-+	if (policy->cpu != 0)
-+		return -EINVAL;
-+
-+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-+			policy->cpuinfo.max_freq);
-+	return 0;
-+}
-+
-+static unsigned int at32_get_speed(unsigned int cpu)
-+{
-+	/* No SMP support */
-+	if (cpu)
-+		return 0;
-+	return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
-+}
-+
-+static int at32_set_target(struct cpufreq_policy *policy,
-+			  unsigned int target_freq,
-+			  unsigned int relation)
-+{
-+	struct cpufreq_freqs freqs;
-+	long freq;
-+
-+	/* Convert target_freq from kHz to Hz */
-+	freq = clk_round_rate(cpuclk, target_freq * 1000);
-+
-+	/* Check if policy->min <= new_freq <= policy->max */
-+	if(freq < (policy->min * 1000) || freq > (policy->max * 1000))
-+		return -EINVAL;
-+
-+	pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000);
-+
-+	freqs.old = at32_get_speed(0);
-+	freqs.new = (freq + 500) / 1000;
-+	freqs.cpu = 0;
-+	freqs.flags = 0;
-+
-+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-+	clk_set_rate(cpuclk, freq);
-+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-+
-+	pr_debug("cpufreq: set frequency %lu Hz\n", freq);
-+
-+	return 0;
-+}
-+
-+static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy)
-+{
-+	if (policy->cpu != 0)
-+		return -EINVAL;
-+
-+	cpuclk = clk_get(NULL, "cpu");
-+	if (IS_ERR(cpuclk)) {
-+		pr_debug("cpufreq: could not get CPU clk\n");
-+		return PTR_ERR(cpuclk);
-+	}
-+
-+	policy->cpuinfo.min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000;
-+	policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-+	policy->cpuinfo.transition_latency = 0;
-+	policy->cur = at32_get_speed(0);
-+	policy->min = policy->cpuinfo.min_freq;
-+	policy->max = policy->cpuinfo.max_freq;
-+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-+
-+	printk("cpufreq: AT32AP CPU frequency driver\n");
-+
-+	return 0;
-+}
-+
-+static struct cpufreq_driver at32_driver = {
-+	.name		= "at32ap",
-+	.owner		= THIS_MODULE,
-+	.init		= at32_cpufreq_driver_init,
-+	.verify		= at32_verify_speed,
-+	.target		= at32_set_target,
-+	.get		= at32_get_speed,
-+	.flags		= CPUFREQ_STICKY,
-+};
-+
-+static int __init at32_cpufreq_init(void)
-+{
-+	return cpufreq_register_driver(&at32_driver);
-+}
-+
-+arch_initcall(at32_cpufreq_init);
-diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
-index 4a60ecc..8acd010 100644
---- a/arch/avr32/mach-at32ap/extint.c
-+++ b/arch/avr32/mach-at32ap/extint.c
-@@ -17,42 +17,83 @@
- 
- #include <asm/io.h>
- 
--#include <asm/arch/sm.h>
--
--#include "sm.h"
-+/* EIC register offsets */
-+#define EIC_IER					0x0000
-+#define EIC_IDR					0x0004
-+#define EIC_IMR					0x0008
-+#define EIC_ISR					0x000c
-+#define EIC_ICR					0x0010
-+#define EIC_MODE				0x0014
-+#define EIC_EDGE				0x0018
-+#define EIC_LEVEL				0x001c
-+#define EIC_TEST				0x0020
-+#define EIC_NMIC				0x0024
-+
-+/* Bitfields in TEST */
-+#define EIC_TESTEN_OFFSET			31
-+#define EIC_TESTEN_SIZE				1
-+
-+/* Bitfields in NMIC */
-+#define EIC_EN_OFFSET				0
-+#define EIC_EN_SIZE				1
-+
-+/* Bit manipulation macros */
-+#define EIC_BIT(name)					\
-+	(1 << EIC_##name##_OFFSET)
-+#define EIC_BF(name,value)				\
-+	(((value) & ((1 << EIC_##name##_SIZE) - 1))	\
-+	 << EIC_##name##_OFFSET)
-+#define EIC_BFEXT(name,value)				\
-+	(((value) >> EIC_##name##_OFFSET)		\
-+	 & ((1 << EIC_##name##_SIZE) - 1))
-+#define EIC_BFINS(name,value,old)			\
-+	(((old) & ~(((1 << EIC_##name##_SIZE) - 1)	\
-+		    << EIC_##name##_OFFSET))		\
-+	 | EIC_BF(name,value))
-+
-+/* Register access macros */
-+#define eic_readl(port,reg)				\
-+	__raw_readl((port)->regs + EIC_##reg)
-+#define eic_writel(port,reg,value)			\
-+	__raw_writel((value), (port)->regs + EIC_##reg)
-+
-+struct eic {
-+	void __iomem *regs;
-+	struct irq_chip *chip;
-+	unsigned int first_irq;
-+};
- 
--static void eim_ack_irq(unsigned int irq)
-+static void eic_ack_irq(unsigned int irq)
- {
--	struct at32_sm *sm = get_irq_chip_data(irq);
--	sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
-+	struct eic *eic = get_irq_chip_data(irq);
-+	eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
- }
- 
--static void eim_mask_irq(unsigned int irq)
-+static void eic_mask_irq(unsigned int irq)
- {
--	struct at32_sm *sm = get_irq_chip_data(irq);
--	sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
-+	struct eic *eic = get_irq_chip_data(irq);
-+	eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
- }
- 
--static void eim_mask_ack_irq(unsigned int irq)
-+static void eic_mask_ack_irq(unsigned int irq)
- {
--	struct at32_sm *sm = get_irq_chip_data(irq);
--	sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
--	sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
-+	struct eic *eic = get_irq_chip_data(irq);
-+	eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
-+	eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
- }
- 
--static void eim_unmask_irq(unsigned int irq)
-+static void eic_unmask_irq(unsigned int irq)
- {
--	struct at32_sm *sm = get_irq_chip_data(irq);
--	sm_writel(sm, EIM_IER, 1 << (irq - sm->eim_first_irq));
-+	struct eic *eic = get_irq_chip_data(irq);
-+	eic_writel(eic, IER, 1 << (irq - eic->first_irq));
- }
- 
--static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
-+static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
- {
--	struct at32_sm *sm = get_irq_chip_data(irq);
-+	struct eic *eic = get_irq_chip_data(irq);
- 	struct irq_desc *desc;
--	unsigned int i = irq - sm->eim_first_irq;
-+	unsigned int i = irq - eic->first_irq;
- 	u32 mode, edge, level;
--	unsigned long flags;
- 	int ret = 0;
- 
- 	flow_type &= IRQ_TYPE_SENSE_MASK;
-@@ -60,11 +101,10 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
- 		flow_type = IRQ_TYPE_LEVEL_LOW;
- 
- 	desc = &irq_desc[irq];
--	spin_lock_irqsave(&sm->lock, flags);
- 
--	mode = sm_readl(sm, EIM_MODE);
--	edge = sm_readl(sm, EIM_EDGE);
--	level = sm_readl(sm, EIM_LEVEL);
-+	mode = eic_readl(eic, MODE);
-+	edge = eic_readl(eic, EDGE);
-+	level = eic_readl(eic, LEVEL);
- 
- 	switch (flow_type) {
- 	case IRQ_TYPE_LEVEL_LOW:
-@@ -89,9 +129,9 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
- 	}
- 
- 	if (ret == 0) {
--		sm_writel(sm, EIM_MODE, mode);
--		sm_writel(sm, EIM_EDGE, edge);
--		sm_writel(sm, EIM_LEVEL, level);
-+		eic_writel(eic, MODE, mode);
-+		eic_writel(eic, EDGE, edge);
-+		eic_writel(eic, LEVEL, level);
- 
- 		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
- 			flow_type |= IRQ_LEVEL;
-@@ -99,35 +139,33 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
- 		desc->status |= flow_type;
- 	}
- 
--	spin_unlock_irqrestore(&sm->lock, flags);
--
- 	return ret;
- }
- 
--struct irq_chip eim_chip = {
--	.name		= "eim",
--	.ack		= eim_ack_irq,
--	.mask		= eim_mask_irq,
--	.mask_ack	= eim_mask_ack_irq,
--	.unmask		= eim_unmask_irq,
--	.set_type	= eim_set_irq_type,
-+struct irq_chip eic_chip = {
-+	.name		= "eic",
-+	.ack		= eic_ack_irq,
-+	.mask		= eic_mask_irq,
-+	.mask_ack	= eic_mask_ack_irq,
-+	.unmask		= eic_unmask_irq,
-+	.set_type	= eic_set_irq_type,
- };
- 
--static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
-+static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
- {
--	struct at32_sm *sm = desc->handler_data;
-+	struct eic *eic = desc->handler_data;
- 	struct irq_desc *ext_desc;
- 	unsigned long status, pending;
- 	unsigned int i, ext_irq;
- 
--	status = sm_readl(sm, EIM_ISR);
--	pending = status & sm_readl(sm, EIM_IMR);
-+	status = eic_readl(eic, ISR);
-+	pending = status & eic_readl(eic, IMR);
- 
- 	while (pending) {
- 		i = fls(pending) - 1;
- 		pending &= ~(1 << i);
- 
--		ext_irq = i + sm->eim_first_irq;
-+		ext_irq = i + eic->first_irq;
- 		ext_desc = irq_desc + ext_irq;
- 		if (ext_desc->status & IRQ_LEVEL)
- 			handle_level_irq(ext_irq, ext_desc);
-@@ -136,51 +174,85 @@ static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
- 	}
- }
- 
--static int __init eim_init(void)
-+static int __init eic_probe(struct platform_device *pdev)
- {
--	struct at32_sm *sm = &system_manager;
-+	struct eic *eic;
-+	struct resource *regs;
- 	unsigned int i;
- 	unsigned int nr_irqs;
- 	unsigned int int_irq;
-+	int ret;
- 	u32 pattern;
- 
--	/*
--	 * The EIM is really the same module as SM, so register
--	 * mapping, etc. has been taken care of already.
--	 */
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	int_irq = platform_get_irq(pdev, 0);
-+	if (!regs || !int_irq) {
-+		dev_dbg(&pdev->dev, "missing regs and/or irq resource\n");
-+		return -ENXIO;
-+	}
-+
-+	ret = -ENOMEM;
-+	eic = kzalloc(sizeof(struct eic), GFP_KERNEL);
-+	if (!eic) {
-+		dev_dbg(&pdev->dev, "no memory for eic structure\n");
-+		goto err_kzalloc;
-+	}
-+
-+	eic->first_irq = EIM_IRQ_BASE + 32 * pdev->id;
-+	eic->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!eic->regs) {
-+		dev_dbg(&pdev->dev, "failed to map regs\n");
-+		goto err_ioremap;
-+	}
- 
- 	/*
- 	 * Find out how many interrupt lines that are actually
- 	 * implemented in hardware.
- 	 */
--	sm_writel(sm, EIM_IDR, ~0UL);
--	sm_writel(sm, EIM_MODE, ~0UL);
--	pattern = sm_readl(sm, EIM_MODE);
-+	eic_writel(eic, IDR, ~0UL);
-+	eic_writel(eic, MODE, ~0UL);
-+	pattern = eic_readl(eic, MODE);
- 	nr_irqs = fls(pattern);
- 
- 	/* Trigger on falling edge unless overridden by driver */
--	sm_writel(sm, EIM_MODE, 0UL);
--	sm_writel(sm, EIM_EDGE, 0UL);
-+	eic_writel(eic, MODE, 0UL);
-+	eic_writel(eic, EDGE, 0UL);
- 
--	sm->eim_chip = &eim_chip;
-+	eic->chip = &eic_chip;
- 
- 	for (i = 0; i < nr_irqs; i++) {
- 		/* NOTE the handler we set here is ignored by the demux */
--		set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
-+		set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
- 					 handle_level_irq);
--		set_irq_chip_data(sm->eim_first_irq + i, sm);
-+		set_irq_chip_data(eic->first_irq + i, eic);
- 	}
- 
--	int_irq = platform_get_irq_byname(sm->pdev, "eim");
--
--	set_irq_chained_handler(int_irq, demux_eim_irq);
--	set_irq_data(int_irq, sm);
-+	set_irq_chained_handler(int_irq, demux_eic_irq);
-+	set_irq_data(int_irq, eic);
- 
--	printk("EIM: External Interrupt Module at 0x%p, IRQ %u\n",
--	       sm->regs, int_irq);
--	printk("EIM: Handling %u external IRQs, starting with IRQ %u\n",
--	       nr_irqs, sm->eim_first_irq);
-+	dev_info(&pdev->dev,
-+		 "External Interrupt Controller at 0x%p, IRQ %u\n",
-+		 eic->regs, int_irq);
-+	dev_info(&pdev->dev,
-+		 "Handling %u external IRQs, starting with IRQ %u\n",
-+		 nr_irqs, eic->first_irq);
- 
- 	return 0;
-+
-+err_ioremap:
-+	kfree(eic);
-+err_kzalloc:
-+	return ret;
-+}
-+
-+static struct platform_driver eic_driver = {
-+	.driver = {
-+		.name = "at32_eic",
-+	},
-+};
-+
-+static int __init eic_init(void)
-+{
-+	return platform_driver_probe(&eic_driver, eic_probe);
- }
--arch_initcall(eim_init);
-+arch_initcall(eic_init);
-diff --git a/arch/avr32/mach-at32ap/gpio-dev.c b/arch/avr32/mach-at32ap/gpio-dev.c
-new file mode 100644
-index 0000000..3d4810d
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/gpio-dev.c
-@@ -0,0 +1,570 @@
-+/*
-+ * GPIO /dev and configfs interface
-+ *
-+ * Copyright (C) 2006-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/configfs.h>
-+#include <linux/cdev.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/poll.h>
-+#include <linux/uaccess.h>
-+#include <linux/wait.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/arch/portmux.h>
-+
-+#define GPIO_DEV_MAX			8
-+
-+static struct class *gpio_dev_class;
-+static dev_t gpio_devt;
-+
-+struct gpio_item {
-+	spinlock_t lock;
-+
-+	int enabled;
-+	int initialized;
-+	int port;
-+	u32 pin_mask;
-+	u32 oe_mask;
-+
-+	/* Pin state last time we read it (for blocking reads) */
-+	u32 pin_state;
-+	int changed;
-+
-+	wait_queue_head_t change_wq;
-+	struct fasync_struct *async_queue;
-+
-+	int id;
-+	struct class_device *gpio_dev;
-+	struct cdev char_dev;
-+	struct config_item item;
-+};
-+
-+struct gpio_attribute {
-+	struct configfs_attribute attr;
-+	ssize_t (*show)(struct gpio_item *, char *);
-+	ssize_t (*store)(struct gpio_item *, const char *, size_t);
-+};
-+
-+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
-+{
-+	struct gpio_item *gpio = dev_id;
-+	u32 old_state, new_state;
-+
-+	old_state = gpio->pin_state;
-+	new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+	gpio->pin_state = new_state;
-+
-+	if (new_state != old_state) {
-+		gpio->changed = 1;
-+		wake_up_interruptible(&gpio->change_wq);
-+
-+		if (gpio->async_queue)
-+			kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int gpio_dev_open(struct inode *inode, struct file *file)
-+{
-+	struct gpio_item *gpio = container_of(inode->i_cdev,
-+					      struct gpio_item,
-+					      char_dev);
-+	unsigned int irq;
-+	unsigned int i;
-+	int ret;
-+
-+	nonseekable_open(inode, file);
-+	config_item_get(&gpio->item);
-+	file->private_data = gpio;
-+
-+	gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
-+						       gpio->pin_mask);
-+	gpio->changed = 1;
-+
-+	for (i = 0; i < 32; i++) {
-+		if (gpio->pin_mask & (1 << i)) {
-+			irq = gpio_to_irq(32 * gpio->port + i);
-+			ret = request_irq(irq, gpio_dev_interrupt, 0,
-+					  "gpio-dev", gpio);
-+			if (ret)
-+				goto err_irq;
-+		}
-+	}
-+
-+	return 0;
-+
-+err_irq:
-+	while (i--) {
-+		if (gpio->pin_mask & (1 << i)) {
-+			irq = gpio_to_irq(32 * gpio->port + i);
-+			free_irq(irq, gpio);
-+		}
-+	}
-+
-+	config_item_put(&gpio->item);
-+
-+	return ret;
-+}
-+
-+static int gpio_dev_fasync(int fd, struct file *file, int mode)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+
-+	return fasync_helper(fd, file, mode, &gpio->async_queue);
-+}
-+
-+static int gpio_dev_release(struct inode *inode, struct file *file)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	unsigned int irq;
-+	unsigned int i;
-+
-+	gpio_dev_fasync(-1, file, 0);
-+
-+	for (i = 0; i < 32; i++) {
-+		if (gpio->pin_mask & (1 << i)) {
-+			irq = gpio_to_irq(32 * gpio->port + i);
-+			free_irq(irq, gpio);
-+		}
-+	}
-+
-+	config_item_put(&gpio->item);
-+
-+	return 0;
-+}
-+
-+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	unsigned int mask = 0;
-+
-+	poll_wait(file, &gpio->change_wq, wait);
-+	if (gpio->changed)
-+		mask |= POLLIN | POLLRDNORM;
-+
-+	return mask;
-+}
-+
-+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
-+			     size_t count, loff_t *offset)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	u32 value;
-+
-+	spin_lock_irq(&gpio->lock);
-+	while (!gpio->changed) {
-+		spin_unlock_irq(&gpio->lock);
-+
-+		if (file->f_flags & O_NONBLOCK)
-+			return -EAGAIN;
-+
-+		if (wait_event_interruptible(gpio->change_wq, gpio->changed))
-+			return -ERESTARTSYS;
-+
-+		spin_lock_irq(&gpio->lock);
-+	}
-+
-+	gpio->changed = 0;
-+	value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+
-+	spin_unlock_irq(&gpio->lock);
-+
-+	count = min(count, (size_t)4);
-+	if (copy_to_user(buf, &value, count))
-+		return -EFAULT;
-+
-+	return count;
-+}
-+
-+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
-+			      size_t count, loff_t *offset)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	u32 value = 0;
-+	u32 mask = ~0UL;
-+
-+	count = min(count, (size_t)4);
-+	if (copy_from_user(&value, buf, count))
-+		return -EFAULT;
-+
-+	/* Assuming big endian */
-+	mask <<= (4 - count) * 8;
-+	mask &= gpio->pin_mask;
-+
-+	at32_gpio_set_value_multiple(gpio->port, value, mask);
-+
-+	return count;
-+}
-+
-+static struct file_operations gpio_dev_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.open		= gpio_dev_open,
-+	.release	= gpio_dev_release,
-+	.fasync		= gpio_dev_fasync,
-+	.poll		= gpio_dev_poll,
-+	.read		= gpio_dev_read,
-+	.write		= gpio_dev_write,
-+};
-+
-+static struct gpio_item *to_gpio_item(struct config_item *item)
-+{
-+	return item ? container_of(item, struct gpio_item, item) : NULL;
-+}
-+
-+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "%d\n", gpio->port);
-+}
-+
-+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
-+				  const char *page, size_t count)
-+{
-+	unsigned long id;
-+	char *p = (char *)page;
-+	ssize_t ret = -EINVAL;
-+
-+	id = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	/* Switching PIO is not allowed when live... */
-+	spin_lock(&gpio->lock);
-+	if (!gpio->enabled) {
-+		ret = -ENXIO;
-+		if (at32_gpio_port_is_valid(id)) {
-+			gpio->port = id;
-+			ret = count;
-+		}
-+	}
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "0x%08x\n", gpio->pin_mask);
-+}
-+
-+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
-+				   const char *page, size_t count)
-+{
-+	u32 new_mask;
-+	char *p = (char *)page;
-+	ssize_t ret = -EINVAL;
-+
-+	new_mask = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	/* Can't update the pin mask while live. */
-+	spin_lock(&gpio->lock);
-+	if (!gpio->enabled) {
-+		gpio->oe_mask &= new_mask;
-+		gpio->pin_mask = new_mask;
-+		ret = count;
-+	}
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "0x%08x\n", gpio->oe_mask);
-+}
-+
-+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
-+				  const char *page, size_t count)
-+{
-+	u32 mask;
-+	char *p = (char *)page;
-+	ssize_t ret = -EINVAL;
-+
-+	mask = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	spin_lock(&gpio->lock);
-+	if (!gpio->enabled) {
-+		gpio->oe_mask = mask & gpio->pin_mask;
-+		ret = count;
-+	}
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "%d\n", gpio->enabled);
-+}
-+
-+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
-+				  const char *page, size_t count)
-+{
-+	char *p = (char *)page;
-+	int enabled;
-+	int ret;
-+
-+	enabled = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	/* make it a boolean value */
-+	enabled = !!enabled;
-+
-+	if (gpio->enabled == enabled)
-+		/* No change; do nothing. */
-+		return count;
-+
-+	BUG_ON(gpio->id >= GPIO_DEV_MAX);
-+
-+	if (!enabled) {
-+		class_device_unregister(gpio->gpio_dev);
-+		cdev_del(&gpio->char_dev);
-+		at32_deselect_pins(gpio->port, gpio->pin_mask);
-+		gpio->initialized = 0;
-+	} else {
-+		if (gpio->port < 0 || !gpio->pin_mask)
-+			return -ENODEV;
-+	}
-+
-+	/* Disallow any updates to gpio_id or pin_mask */
-+	spin_lock(&gpio->lock);
-+	gpio->enabled = enabled;
-+	spin_unlock(&gpio->lock);
-+
-+	if (!enabled)
-+		return count;
-+
-+	/* Now, try to allocate the pins */
-+	ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
-+	if (ret)
-+		goto err_alloc_pins;
-+
-+	gpio->initialized = 1;
-+
-+	cdev_init(&gpio->char_dev, &gpio_dev_fops);
-+	gpio->char_dev.owner = THIS_MODULE;
-+	ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
-+	if (ret < 0)
-+		goto err_cdev_add;
-+	gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
-+					     MKDEV(MAJOR(gpio_devt), gpio->id),
-+					     NULL,
-+					     "gpio%d", gpio->id);
-+	if (IS_ERR(gpio->gpio_dev)) {
-+		printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
-+		ret = PTR_ERR(gpio->gpio_dev);
-+		goto err_class_dev;
-+	}
-+
-+	printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
-+	       gpio->id, gpio->port, gpio->pin_mask,
-+	       MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
-+
-+	return 0;
-+
-+err_class_dev:
-+	cdev_del(&gpio->char_dev);
-+err_cdev_add:
-+	at32_deselect_pins(gpio->port, gpio->pin_mask);
-+	gpio->initialized = 0;
-+err_alloc_pins:
-+	spin_lock(&gpio->lock);
-+	gpio->enabled = 0;
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static struct gpio_attribute gpio_item_attr_gpio_id = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "gpio_id",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_gpio_id,
-+	.store = gpio_store_gpio_id,
-+};
-+static struct gpio_attribute gpio_item_attr_pin_mask = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "pin_mask",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_pin_mask,
-+	.store = gpio_store_pin_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_oe_mask = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "oe_mask",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_oe_mask,
-+	.store = gpio_store_oe_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_enabled = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "enabled",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_enabled,
-+	.store = gpio_store_enabled,
-+};
-+
-+static struct configfs_attribute *gpio_item_attrs[] = {
-+	&gpio_item_attr_gpio_id.attr,
-+	&gpio_item_attr_pin_mask.attr,
-+	&gpio_item_attr_oe_mask.attr,
-+	&gpio_item_attr_enabled.attr,
-+	NULL,
-+};
-+
-+static ssize_t gpio_show_attr(struct config_item *item,
-+			      struct configfs_attribute *attr,
-+			      char *page)
-+{
-+	struct gpio_item *gpio_item = to_gpio_item(item);
-+	struct gpio_attribute *gpio_attr
-+		= container_of(attr, struct gpio_attribute, attr);
-+	ssize_t ret = 0;
-+
-+	if (gpio_attr->show)
-+		ret = gpio_attr->show(gpio_item, page);
-+	return ret;
-+}
-+
-+static ssize_t gpio_store_attr(struct config_item *item,
-+			       struct configfs_attribute *attr,
-+			       const char *page, size_t count)
-+{
-+	struct gpio_item *gpio_item = to_gpio_item(item);
-+	struct gpio_attribute *gpio_attr
-+		= container_of(attr, struct gpio_attribute, attr);
-+	ssize_t ret = -EINVAL;
-+
-+	if (gpio_attr->store)
-+		ret = gpio_attr->store(gpio_item, page, count);
-+	return ret;
-+}
-+
-+static void gpio_release(struct config_item *item)
-+{
-+	kfree(to_gpio_item(item));
-+}
-+
-+static struct configfs_item_operations gpio_item_ops = {
-+	.release		= gpio_release,
-+	.show_attribute		= gpio_show_attr,
-+	.store_attribute	= gpio_store_attr,
-+};
-+
-+static struct config_item_type gpio_item_type = {
-+	.ct_item_ops	= &gpio_item_ops,
-+	.ct_attrs	= gpio_item_attrs,
-+	.ct_owner	= THIS_MODULE,
-+};
-+
-+static struct config_item *gpio_make_item(struct config_group *group,
-+					  const char *name)
-+{
-+	static int next_id;
-+	struct gpio_item *gpio;
-+
-+	if (next_id >= GPIO_DEV_MAX)
-+		return NULL;
-+
-+	gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
-+	if (!gpio)
-+		return NULL;
-+
-+	gpio->id = next_id++;
-+	config_item_init_type_name(&gpio->item, name, &gpio_item_type);
-+	spin_lock_init(&gpio->lock);
-+	init_waitqueue_head(&gpio->change_wq);
-+
-+	return &gpio->item;
-+}
-+
-+static void gpio_drop_item(struct config_group *group,
-+			   struct config_item *item)
-+{
-+	struct gpio_item *gpio = to_gpio_item(item);
-+
-+	spin_lock(&gpio->lock);
-+	if (gpio->enabled) {
-+		class_device_unregister(gpio->gpio_dev);
-+		cdev_del(&gpio->char_dev);
-+	}
-+
-+	if (gpio->initialized) {
-+		at32_deselect_pins(gpio->port, gpio->pin_mask);
-+		gpio->initialized = 0;
-+		gpio->enabled = 0;
-+	}
-+	spin_unlock(&gpio->lock);
-+}
-+
-+static struct configfs_group_operations gpio_group_ops = {
-+	.make_item	= gpio_make_item,
-+	.drop_item	= gpio_drop_item,
-+};
-+
-+static struct config_item_type gpio_group_type = {
-+	.ct_group_ops	= &gpio_group_ops,
-+	.ct_owner	= THIS_MODULE,
-+};
-+
-+static struct configfs_subsystem gpio_subsys = {
-+	.su_group = {
-+		.cg_item = {
-+			 .ci_namebuf = "gpio",
-+			 .ci_type = &gpio_group_type,
-+		 },
-+	},
-+};
-+
-+static int __init gpio_dev_init(void)
-+{
-+	int err;
-+
-+	gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
-+	if (IS_ERR(gpio_dev_class)) {
-+		err = PTR_ERR(gpio_dev_class);
-+		goto err_class_create;
-+	}
-+
-+	err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
-+	if (err < 0)
-+		goto err_alloc_chrdev;
-+
-+	/* Configfs initialization */
-+	config_group_init(&gpio_subsys.su_group);
-+	init_MUTEX(&gpio_subsys.su_sem);
-+	err = configfs_register_subsystem(&gpio_subsys);
-+	if (err)
-+		goto err_register_subsys;
-+
-+	return 0;
-+
-+err_register_subsys:
-+	unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
-+err_alloc_chrdev:
-+	class_destroy(gpio_dev_class);
-+err_class_create:
-+	printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
-+	return err;
-+}
-+late_initcall(gpio_dev_init);
-diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
-index 1eb99b8..153bb9a 100644
---- a/arch/avr32/mach-at32ap/pio.c
-+++ b/arch/avr32/mach-at32ap/pio.c
-@@ -158,6 +158,82 @@ fail:
- 	dump_stack();
- }
- 
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port)
-+{
-+	return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
-+}
-+
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
-+{
-+	struct pio_device *pio;
-+	u32 old, new;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
-+
-+	/* Try to allocate the pins */
-+	do {
-+		old = pio->pinmux_mask;
-+		if (old & pins)
-+			return -EBUSY;
-+
-+		new = old | pins;
-+	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+
-+	/* That went well, now configure the port */
-+	pio_writel(pio, OER, oe_mask);
-+	pio_writel(pio, PER, pins);
-+
-+	return 0;
-+}
-+
-+void at32_deselect_pins(unsigned int port, u32 pins)
-+{
-+	struct pio_device *pio;
-+	u32 old, new;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+	/* Return to a "safe" mux configuration */
-+	pio_writel(pio, PUER, pins);
-+	pio_writel(pio, ODR, pins);
-+
-+	/* Deallocate the pins */
-+	do {
-+		old = pio->pinmux_mask;
-+		new = old & ~pins;
-+	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+}
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
-+{
-+	struct pio_device *pio;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+	return pio_readl(pio, PDSR) & pins;
-+}
-+
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
-+{
-+	struct pio_device *pio;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+	/* No atomic updates for now... */
-+	pio_writel(pio, CODR, ~value & mask);
-+	pio_writel(pio, SODR, value & mask);
-+}
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
-+
- /*--------------------------------------------------------------------------*/
- 
- /* GPIO API */
-diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
-new file mode 100644
-index 0000000..a1f8ace
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pm.h
-@@ -0,0 +1,112 @@
-+/*
-+ * Register definitions for the Power Manager (PM)
-+ */
-+#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
-+#define __ARCH_AVR32_MACH_AT32AP_PM_H__
-+
-+/* PM register offsets */
-+#define PM_MCCTRL				0x0000
-+#define PM_CKSEL				0x0004
-+#define PM_CPU_MASK				0x0008
-+#define PM_HSB_MASK				0x000c
-+#define PM_PBA_MASK				0x0010
-+#define PM_PBB_MASK				0x0014
-+#define PM_PLL0					0x0020
-+#define PM_PLL1					0x0024
-+#define PM_IER					0x0040
-+#define PM_IDR					0x0044
-+#define PM_IMR					0x0048
-+#define PM_ISR					0x004c
-+#define PM_ICR					0x0050
-+#define PM_GCCTRL(x)				(0x0060 + 4 * (x))
-+#define PM_RCAUSE				0x00c0
-+
-+/* Bitfields in CKSEL */
-+#define PM_CPUSEL_OFFSET			0
-+#define PM_CPUSEL_SIZE				3
-+#define PM_CPUDIV_OFFSET			7
-+#define PM_CPUDIV_SIZE				1
-+#define PM_HSBSEL_OFFSET			8
-+#define PM_HSBSEL_SIZE				3
-+#define PM_HSBDIV_OFFSET			15
-+#define PM_HSBDIV_SIZE				1
-+#define PM_PBASEL_OFFSET			16
-+#define PM_PBASEL_SIZE				3
-+#define PM_PBADIV_OFFSET			23
-+#define PM_PBADIV_SIZE				1
-+#define PM_PBBSEL_OFFSET			24
-+#define PM_PBBSEL_SIZE				3
-+#define PM_PBBDIV_OFFSET			31
-+#define PM_PBBDIV_SIZE				1
-+
-+/* Bitfields in PLL0 */
-+#define PM_PLLEN_OFFSET				0
-+#define PM_PLLEN_SIZE				1
-+#define PM_PLLOSC_OFFSET			1
-+#define PM_PLLOSC_SIZE				1
-+#define PM_PLLOPT_OFFSET			2
-+#define PM_PLLOPT_SIZE				3
-+#define PM_PLLDIV_OFFSET			8
-+#define PM_PLLDIV_SIZE				8
-+#define PM_PLLMUL_OFFSET			16
-+#define PM_PLLMUL_SIZE				8
-+#define PM_PLLCOUNT_OFFSET			24
-+#define PM_PLLCOUNT_SIZE			6
-+#define PM_PLLTEST_OFFSET			31
-+#define PM_PLLTEST_SIZE				1
-+
-+/* Bitfields in ICR */
-+#define PM_LOCK0_OFFSET				0
-+#define PM_LOCK0_SIZE				1
-+#define PM_LOCK1_OFFSET				1
-+#define PM_LOCK1_SIZE				1
-+#define PM_WAKE_OFFSET				2
-+#define PM_WAKE_SIZE				1
-+#define PM_CKRDY_OFFSET				5
-+#define PM_CKRDY_SIZE				1
-+#define PM_MSKRDY_OFFSET			6
-+#define PM_MSKRDY_SIZE				1
-+
-+/* Bitfields in GCCTRL0 */
-+#define PM_OSCSEL_OFFSET			0
-+#define PM_OSCSEL_SIZE				1
-+#define PM_PLLSEL_OFFSET			1
-+#define PM_PLLSEL_SIZE				1
-+#define PM_CEN_OFFSET				2
-+#define PM_CEN_SIZE				1
-+#define PM_DIVEN_OFFSET				4
-+#define PM_DIVEN_SIZE				1
-+#define PM_DIV_OFFSET				8
-+#define PM_DIV_SIZE				8
-+
-+/* Bitfields in RCAUSE */
-+#define PM_POR_OFFSET				0
-+#define PM_POR_SIZE				1
-+#define PM_EXT_OFFSET				2
-+#define PM_EXT_SIZE				1
-+#define PM_WDT_OFFSET				3
-+#define PM_WDT_SIZE				1
-+#define PM_NTAE_OFFSET				4
-+#define PM_NTAE_SIZE				1
-+
-+/* Bit manipulation macros */
-+#define PM_BIT(name)					\
-+	(1 << PM_##name##_OFFSET)
-+#define PM_BF(name,value)				\
-+	(((value) & ((1 << PM_##name##_SIZE) - 1))	\
-+	 << PM_##name##_OFFSET)
-+#define PM_BFEXT(name,value)				\
-+	(((value) >> PM_##name##_OFFSET)		\
-+	 & ((1 << PM_##name##_SIZE) - 1))
-+#define PM_BFINS(name,value,old)\
-+	(((old) & ~(((1 << PM_##name##_SIZE) - 1)	\
-+		    << PM_##name##_OFFSET))		\
-+	 | PM_BF(name,value))
-+
-+/* Register access macros */
-+#define pm_readl(reg)							\
-+	__raw_readl((void __iomem *)AT32_PM_BASE + PM_##reg)
-+#define pm_writel(reg,value)						\
-+	__raw_writel((value), (void __iomem *)AT32_PM_BASE + PM_##reg)
-+
-+#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
-diff --git a/arch/avr32/mach-at32ap/sm.h b/arch/avr32/mach-at32ap/sm.h
-deleted file mode 100644
-index cad02b5..0000000
---- a/arch/avr32/mach-at32ap/sm.h
-+++ /dev/null
-@@ -1,242 +0,0 @@
--/*
-- * Register definitions for SM
-- *
-- * System Manager
-- */
--#ifndef __ASM_AVR32_SM_H__
--#define __ASM_AVR32_SM_H__
--
--/* SM register offsets */
--#define SM_PM_MCCTRL                            0x0000
--#define SM_PM_CKSEL                             0x0004
--#define SM_PM_CPU_MASK                          0x0008
--#define SM_PM_HSB_MASK                          0x000c
--#define SM_PM_PBA_MASK                         0x0010
--#define SM_PM_PBB_MASK                         0x0014
--#define SM_PM_PLL0                              0x0020
--#define SM_PM_PLL1                              0x0024
--#define SM_PM_VCTRL                             0x0030
--#define SM_PM_VMREF                             0x0034
--#define SM_PM_VMV                               0x0038
--#define SM_PM_IER                               0x0040
--#define SM_PM_IDR                               0x0044
--#define SM_PM_IMR                               0x0048
--#define SM_PM_ISR                               0x004c
--#define SM_PM_ICR                               0x0050
--#define SM_PM_GCCTRL                            0x0060
--#define SM_RTC_CTRL                             0x0080
--#define SM_RTC_VAL                              0x0084
--#define SM_RTC_TOP                              0x0088
--#define SM_RTC_IER                              0x0090
--#define SM_RTC_IDR                              0x0094
--#define SM_RTC_IMR                              0x0098
--#define SM_RTC_ISR                              0x009c
--#define SM_RTC_ICR                              0x00a0
--#define SM_WDT_CTRL                             0x00b0
--#define SM_WDT_CLR                              0x00b4
--#define SM_WDT_EXT                              0x00b8
--#define SM_RC_RCAUSE                            0x00c0
--#define SM_EIM_IER                              0x0100
--#define SM_EIM_IDR                              0x0104
--#define SM_EIM_IMR                              0x0108
--#define SM_EIM_ISR                              0x010c
--#define SM_EIM_ICR                              0x0110
--#define SM_EIM_MODE                             0x0114
--#define SM_EIM_EDGE                             0x0118
--#define SM_EIM_LEVEL                            0x011c
--#define SM_EIM_TEST                             0x0120
--#define SM_EIM_NMIC                             0x0124
--
--/* Bitfields in PM_MCCTRL */
--
--/* Bitfields in PM_CKSEL */
--#define SM_CPUSEL_OFFSET                        0
--#define SM_CPUSEL_SIZE                          3
--#define SM_CPUDIV_OFFSET                        7
--#define SM_CPUDIV_SIZE                          1
--#define SM_HSBSEL_OFFSET                        8
--#define SM_HSBSEL_SIZE                          3
--#define SM_HSBDIV_OFFSET                        15
--#define SM_HSBDIV_SIZE                          1
--#define SM_PBASEL_OFFSET                       16
--#define SM_PBASEL_SIZE                         3
--#define SM_PBADIV_OFFSET                       23
--#define SM_PBADIV_SIZE                         1
--#define SM_PBBSEL_OFFSET                       24
--#define SM_PBBSEL_SIZE                         3
--#define SM_PBBDIV_OFFSET                       31
--#define SM_PBBDIV_SIZE                         1
--
--/* Bitfields in PM_CPU_MASK */
--
--/* Bitfields in PM_HSB_MASK */
--
--/* Bitfields in PM_PBA_MASK */
--
--/* Bitfields in PM_PBB_MASK */
--
--/* Bitfields in PM_PLL0 */
--#define SM_PLLEN_OFFSET                         0
--#define SM_PLLEN_SIZE                           1
--#define SM_PLLOSC_OFFSET                        1
--#define SM_PLLOSC_SIZE                          1
--#define SM_PLLOPT_OFFSET                        2
--#define SM_PLLOPT_SIZE                          3
--#define SM_PLLDIV_OFFSET                        8
--#define SM_PLLDIV_SIZE                          8
--#define SM_PLLMUL_OFFSET                        16
--#define SM_PLLMUL_SIZE                          8
--#define SM_PLLCOUNT_OFFSET                      24
--#define SM_PLLCOUNT_SIZE                        6
--#define SM_PLLTEST_OFFSET                       31
--#define SM_PLLTEST_SIZE                         1
--
--/* Bitfields in PM_PLL1 */
--
--/* Bitfields in PM_VCTRL */
--#define SM_VAUTO_OFFSET                         0
--#define SM_VAUTO_SIZE                           1
--#define SM_PM_VCTRL_VAL_OFFSET                  8
--#define SM_PM_VCTRL_VAL_SIZE                    7
--
--/* Bitfields in PM_VMREF */
--#define SM_REFSEL_OFFSET                        0
--#define SM_REFSEL_SIZE                          4
--
--/* Bitfields in PM_VMV */
--#define SM_PM_VMV_VAL_OFFSET                    0
--#define SM_PM_VMV_VAL_SIZE                      8
--
--/* Bitfields in PM_IER */
--
--/* Bitfields in PM_IDR */
--
--/* Bitfields in PM_IMR */
--
--/* Bitfields in PM_ISR */
--
--/* Bitfields in PM_ICR */
--#define SM_LOCK0_OFFSET                         0
--#define SM_LOCK0_SIZE                           1
--#define SM_LOCK1_OFFSET                         1
--#define SM_LOCK1_SIZE                           1
--#define SM_WAKE_OFFSET                          2
--#define SM_WAKE_SIZE                            1
--#define SM_VOK_OFFSET                           3
--#define SM_VOK_SIZE                             1
--#define SM_VMRDY_OFFSET                         4
--#define SM_VMRDY_SIZE                           1
--#define SM_CKRDY_OFFSET                         5
--#define SM_CKRDY_SIZE                           1
--
--/* Bitfields in PM_GCCTRL */
--#define SM_OSCSEL_OFFSET                        0
--#define SM_OSCSEL_SIZE                          1
--#define SM_PLLSEL_OFFSET                        1
--#define SM_PLLSEL_SIZE                          1
--#define SM_CEN_OFFSET                           2
--#define SM_CEN_SIZE                             1
--#define SM_CPC_OFFSET                           3
--#define SM_CPC_SIZE                             1
--#define SM_DIVEN_OFFSET                         4
--#define SM_DIVEN_SIZE                           1
--#define SM_DIV_OFFSET                           8
--#define SM_DIV_SIZE                             8
--
--/* Bitfields in RTC_CTRL */
--#define SM_PCLR_OFFSET                          1
--#define SM_PCLR_SIZE                            1
--#define SM_TOPEN_OFFSET                         2
--#define SM_TOPEN_SIZE                           1
--#define SM_CLKEN_OFFSET                         3
--#define SM_CLKEN_SIZE                           1
--#define SM_PSEL_OFFSET                          8
--#define SM_PSEL_SIZE                            16
--
--/* Bitfields in RTC_VAL */
--#define SM_RTC_VAL_VAL_OFFSET                   0
--#define SM_RTC_VAL_VAL_SIZE                     31
--
--/* Bitfields in RTC_TOP */
--#define SM_RTC_TOP_VAL_OFFSET                   0
--#define SM_RTC_TOP_VAL_SIZE                     32
--
--/* Bitfields in RTC_IER */
--
--/* Bitfields in RTC_IDR */
--
--/* Bitfields in RTC_IMR */
--
--/* Bitfields in RTC_ISR */
--
--/* Bitfields in RTC_ICR */
--#define SM_TOPI_OFFSET                          0
--#define SM_TOPI_SIZE                            1
--
--/* Bitfields in WDT_CTRL */
--#define SM_KEY_OFFSET                           24
--#define SM_KEY_SIZE                             8
--
--/* Bitfields in WDT_CLR */
--
--/* Bitfields in WDT_EXT */
--
--/* Bitfields in RC_RCAUSE */
--#define SM_POR_OFFSET                           0
--#define SM_POR_SIZE                             1
--#define SM_BOD_OFFSET                           1
--#define SM_BOD_SIZE                             1
--#define SM_EXT_OFFSET                           2
--#define SM_EXT_SIZE                             1
--#define SM_WDT_OFFSET                           3
--#define SM_WDT_SIZE                             1
--#define SM_NTAE_OFFSET                          4
--#define SM_NTAE_SIZE                            1
--#define SM_SERP_OFFSET                          5
--#define SM_SERP_SIZE                            1
--
--/* Bitfields in EIM_IER */
--
--/* Bitfields in EIM_IDR */
--
--/* Bitfields in EIM_IMR */
--
--/* Bitfields in EIM_ISR */
--
--/* Bitfields in EIM_ICR */
--
--/* Bitfields in EIM_MODE */
--
--/* Bitfields in EIM_EDGE */
--#define SM_INT0_OFFSET                          0
--#define SM_INT0_SIZE                            1
--#define SM_INT1_OFFSET                          1
--#define SM_INT1_SIZE                            1
--#define SM_INT2_OFFSET                          2
--#define SM_INT2_SIZE                            1
--#define SM_INT3_OFFSET                          3
--#define SM_INT3_SIZE                            1
--
--/* Bitfields in EIM_LEVEL */
--
--/* Bitfields in EIM_TEST */
--#define SM_TESTEN_OFFSET                        31
--#define SM_TESTEN_SIZE                          1
--
--/* Bitfields in EIM_NMIC */
--#define SM_EN_OFFSET                            0
--#define SM_EN_SIZE                              1
--
--/* Bit manipulation macros */
--#define SM_BIT(name)                            (1 << SM_##name##_OFFSET)
--#define SM_BF(name,value)                       (((value) & ((1 << SM_##name##_SIZE) - 1)) << SM_##name##_OFFSET)
--#define SM_BFEXT(name,value)                    (((value) >> SM_##name##_OFFSET) & ((1 << SM_##name##_SIZE) - 1))
--#define SM_BFINS(name,value,old)                (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value))
--
--/* Register access macros */
--#define sm_readl(port,reg)					\
--	__raw_readl((port)->regs + SM_##reg)
--#define sm_writel(port,reg,value)				\
--	__raw_writel((value), (port)->regs + SM_##reg)
--
--#endif /* __ASM_AVR32_SM_H__ */
-diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
-index 099212d..26f29c6 100644
---- a/arch/avr32/mm/dma-coherent.c
-+++ b/arch/avr32/mm/dma-coherent.c
-@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size,
- 	struct page *page, *free, *end;
- 	int order;
- 
-+	/* Following is a work-around (a.k.a. hack) to prevent pages
-+	 * with __GFP_COMP being passed to split_page() which cannot
-+	 * handle them.  The real problem is that this flag probably
-+	 * should be 0 on AVR32 as it is not supported on this
-+	 * platform--see CONFIG_HUGETLB_PAGE. */
-+	gfp &= ~(__GFP_COMP);
-+
- 	size = PAGE_ALIGN(size);
- 	order = get_order(size);
- 
-diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
-index 53f5538..520afb8 100644
---- a/drivers/char/watchdog/Kconfig
-+++ b/drivers/char/watchdog/Kconfig
-@@ -187,6 +187,26 @@ config PNX4008_WATCHDOG
- 
- 	  Say N if you are unsure.
- 
-+# AVR32 Architecture
-+
-+config AT32AP700X_WDT
-+	tristate "AT32AP700x watchdog"
-+	depends on WATCHDOG && CPU_AT32AP7000
-+	help
-+	  Watchdog timer embedded into AT32AP700x devices. This will reboot
-+	  your system when the timeout is reached.
-+
-+config AT32AP700X_WDT_TIMEOUT
-+	int "Timeout value for AT32AP700x watchdog"
-+	depends on AT32AP700X_WDT
-+	default "2"
-+	range 1 2
-+	help
-+	  Sets the timeout value for the watchdog in AT32AP700x devices.
-+	  Limited by hardware to be 1 or 2 seconds.
-+
-+	  Set to 2 seconds by default.
-+
- # X86 (i386 + ia64 + x86_64) Architecture
- 
- config ACQUIRE_WDT
-diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
-index d90f649..3907ec0 100644
---- a/drivers/char/watchdog/Makefile
-+++ b/drivers/char/watchdog/Makefile
-@@ -36,6 +36,9 @@ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
- obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
- obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
- 
-+# AVR32 Architecture
-+obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
-+
- # X86 (i386 + ia64 + x86_64) Architecture
- obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
- obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
-diff --git a/drivers/char/watchdog/at32ap700x_wdt.c b/drivers/char/watchdog/at32ap700x_wdt.c
-new file mode 100644
-index 0000000..9b598d9
---- /dev/null
-+++ b/drivers/char/watchdog/at32ap700x_wdt.c
-@@ -0,0 +1,325 @@
-+/*
-+ * Watchdog driver for Atmel AT32AP700X devices
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/platform_device.h>
-+#include <linux/watchdog.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-+
-+#define TIMEOUT_MIN		1
-+#define TIMEOUT_DEFAULT		CONFIG_AT32AP700X_WDT_TIMEOUT
-+#define TIMEOUT_MAX		2
-+
-+/* Watchdog registers and write/read macro */
-+#define	WDT_CTRL		0x00
-+#define WDT_CTRL_EN		   0
-+#define WDT_CTRL_PSEL		   8
-+#define WDT_CTRL_KEY		  24
-+
-+#define WDT_CLR			0x04
-+
-+#define WDT_BIT(name)		(1 << WDT_##name)
-+#define WDT_BF(name,value)	((value) << WDT_##name)
-+
-+#define wdt_readl(dev,reg)				\
-+	__raw_readl((dev)->regs + WDT_##reg)
-+#define wdt_writel(dev,reg,value)			\
-+	__raw_writel((value), (dev)->regs + WDT_##reg)
-+
-+struct wdt_at32ap700x {
-+	void __iomem		*regs;
-+	int			timeout;
-+	int			users;
-+	struct miscdevice	miscdev;
-+};
-+
-+static struct wdt_at32ap700x *wdt;
-+
-+/*
-+ * Disable the watchdog.
-+ */
-+static void inline at32_wdt_stop(void)
-+{
-+	unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
-+	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
-+	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
-+}
-+
-+/*
-+ * Enable and reset the watchdog.
-+ */
-+static void inline at32_wdt_start(void)
-+{
-+	/* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-+	unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
-+
-+	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+			| WDT_BF(CTRL_PSEL, psel)
-+			| WDT_BF(CTRL_KEY, 0x55));
-+	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+			| WDT_BF(CTRL_PSEL, psel)
-+			| WDT_BF(CTRL_KEY, 0xaa));
-+}
-+
-+/*
-+ * Pat the watchdog timer.
-+ */
-+static void inline at32_wdt_pat(void)
-+{
-+	wdt_writel(wdt, CLR, 0x42);
-+}
-+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at32_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(1, &wdt->users))
-+		return -EBUSY;
-+
-+	at32_wdt_start();
-+	return nonseekable_open(inode, file);
-+}
-+
-+/*
-+ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
-+ * the watchdog is also disabled.
-+ */
-+static int at32_wdt_close(struct inode *inode, struct file *file)
-+{
-+#ifndef CONFIG_WATCHDOG_NOWAYOUT
-+	at32_wdt_stop();
-+#endif
-+	clear_bit(1, &wdt->users);
-+	return 0;
-+}
-+
-+/*
-+ * Change the watchdog time interval.
-+ */
-+static int at32_wdt_settimeout(int time)
-+{
-+	/*
-+	 * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
-+	 * 2 ^ 16 allowing up to 2 seconds timeout.
-+	 */
-+	if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
-+		return -EINVAL;
-+
-+	/*
-+	 * Set new watchdog time. It will be used when at32_wdt_start() is
-+	 * called.
-+	 */
-+	wdt->timeout = time;
-+	return 0;
-+}
-+
-+static struct watchdog_info at32_wdt_info = {
-+	.identity	= "at32ap700x watchdog",
-+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+};
-+
-+/*
-+ * Handle commands from user-space.
-+ */
-+static int at32_wdt_ioctl(struct inode *inode, struct file *file,
-+		unsigned int cmd, unsigned long arg)
-+{
-+	int ret = -ENOTTY;
-+	int time;
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = argp;
-+
-+	switch (cmd) {
-+	case WDIOC_KEEPALIVE:
-+		at32_wdt_pat();
-+		ret = 0;
-+		break;
-+	case WDIOC_GETSUPPORT:
-+		ret = copy_to_user(argp, &at32_wdt_info,
-+				sizeof(at32_wdt_info)) ? -EFAULT : 0;
-+		break;
-+	case WDIOC_SETTIMEOUT:
-+		ret = get_user(time, p);
-+		if (ret)
-+			break;
-+		ret = at32_wdt_settimeout(time);
-+		if (ret)
-+			break;
-+		/* Enable new time value */
-+		at32_wdt_start();
-+		/* fall through */
-+	case WDIOC_GETTIMEOUT:
-+		ret = put_user(wdt->timeout, p);
-+		break;
-+	case WDIOC_GETSTATUS: /* fall through */
-+	case WDIOC_GETBOOTSTATUS:
-+		ret = put_user(0, p);
-+		break;
-+	case WDIOC_SETOPTIONS:
-+		ret = get_user(time, p);
-+		if (ret)
-+			break;
-+		if (time & WDIOS_DISABLECARD)
-+			at32_wdt_stop();
-+		if (time & WDIOS_ENABLECARD)
-+			at32_wdt_start();
-+		ret = 0;
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len,
-+				loff_t *ppos)
-+{
-+	at32_wdt_pat();
-+	return len;
-+}
-+
-+static const struct file_operations at32_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.ioctl		= at32_wdt_ioctl,
-+	.open		= at32_wdt_open,
-+	.release	= at32_wdt_close,
-+	.write		= at32_wdt_write,
-+};
-+
-+static int __init at32_wdt_probe(struct platform_device *pdev)
-+{
-+	struct resource	*regs;
-+	int ret;
-+
-+	if (wdt) {
-+		dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
-+		return -EBUSY;
-+	}
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_dbg(&pdev->dev, "missing mmio resource\n");
-+		return -ENXIO;
-+	}
-+
-+	wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
-+	if (!wdt) {
-+		dev_dbg(&pdev->dev, "no memory for wdt structure\n");
-+		return -ENOMEM;
-+	}
-+
-+	wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!wdt->regs) {
-+		ret = -ENOMEM;
-+		dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+		goto err_free;
-+	}
-+	wdt->users = 0;
-+	wdt->miscdev.minor = WATCHDOG_MINOR;
-+	wdt->miscdev.name = "watchdog";
-+	wdt->miscdev.fops = &at32_wdt_fops;
-+
-+	if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
-+		at32_wdt_settimeout(TIMEOUT_MAX);
-+		dev_dbg(&pdev->dev,
-+			"default timeout invalid, set to %d sec.\n",
-+			TIMEOUT_MAX);
-+	}
-+
-+	ret = misc_register(&wdt->miscdev);
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-+		goto err_iounmap;
-+	}
-+
-+	platform_set_drvdata(pdev, wdt);
-+	wdt->miscdev.parent = &pdev->dev;
-+	dev_info(&pdev->dev, "AT32AP700X WDT at 0x%p\n", wdt->regs);
-+
-+	return 0;
-+
-+err_iounmap:
-+	iounmap(wdt->regs);
-+err_free:
-+	kfree(wdt);
-+	wdt = NULL;
-+	return ret;
-+}
-+
-+static int __exit at32_wdt_remove(struct platform_device *pdev)
-+{
-+	if (wdt && platform_get_drvdata(pdev) == wdt) {
-+		misc_deregister(&wdt->miscdev);
-+		iounmap(wdt->regs);
-+		kfree(wdt);
-+		wdt = NULL;
-+		platform_set_drvdata(pdev, NULL);
-+	}
-+
-+	return 0;
-+}
-+
-+static void at32_wdt_shutdown(struct platform_device *pdev)
-+{
-+	at32_wdt_stop();
-+}
-+
-+#ifdef CONFIG_PM
-+static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
-+{
-+	at32_wdt_stop();
-+	return 0;
-+}
-+
-+static int at32_wdt_resume(struct platform_device *pdev)
-+{
-+	if (wdt->users)
-+		at32_wdt_start();
-+	return 0;
-+}
-+#else
-+#define at32_wdt_suspend NULL
-+#define at32_wdt_resume NULL
-+#endif
-+
-+static struct platform_driver at32_wdt_driver = {
-+	.remove		= __exit_p(at32_wdt_remove),
-+	.suspend	= at32_wdt_suspend,
-+	.resume		= at32_wdt_resume,
-+	.driver		= {
-+		.name	= "at32_wdt",
-+		.owner	= THIS_MODULE,
-+	},
-+	.shutdown	= at32_wdt_shutdown,
-+};
-+
-+static int __init at32_wdt_init(void)
-+{
-+	return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
-+}
-+module_init(at32_wdt_init);
-+
-+static void __exit at32_wdt_exit(void)
-+{
-+	platform_driver_unregister(&at32_wdt_driver);
-+}
-+module_exit(at32_wdt_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index 838dc1c..80da12d 100644
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -4,6 +4,26 @@
- 
- menu "I2C Hardware Bus support"
- 
-+config I2C_ATMELTWI
-+	tristate "Atmel TWI/I2C"
-+	depends on I2C
-+	help
-+	  Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+	  AT91-based device and want to use its built-in TWI
-+	  functionality. Atmel's TWI is compatible with Philips' I2C
-+	  protocol. If in doubt, say NO
-+
-+config I2C_ATMELTWI_BAUDRATE
-+	prompt "Atmel TWI baudrate"
-+	depends on I2C_ATMELTWI
-+	int
-+	default 100000
-+	help
-+	  Set the TWI/I2C baudrate. This will alter the default value. A
-+	  different baudrate can be set by using a module parameter as well. If
-+	  no parameter is provided when loading, this is the value that will be
-+	  used.
-+
- config I2C_ALI1535
- 	tristate "ALI 1535"
- 	depends on PCI
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index 14d1432..fd7c3b3 100644
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
- obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
- obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI)	+= i2c-atmeltwi.o
- 
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
-diff --git a/drivers/i2c/busses/atmeltwi.h b/drivers/i2c/busses/atmeltwi.h
-new file mode 100644
-index 0000000..8502ea6
---- /dev/null
-+++ b/drivers/i2c/busses/atmeltwi.h
-@@ -0,0 +1,117 @@
-+/*
-+ * Register definitions for the Atmel Two-Wire Interface
-+ */
-+
-+#ifndef __ASM_AVR32_TWI_H__
-+#define __ASM_AVR32_TWI_H__
-+
-+/* TWI register offsets */
-+#define TWI_CR					0x0000
-+#define TWI_MMR					0x0004
-+#define TWI_SMR					0x0008
-+#define TWI_IADR				0x000c
-+#define TWI_CWGR				0x0010
-+#define TWI_SR					0x0020
-+#define TWI_IER					0x0024
-+#define TWI_IDR					0x0028
-+#define TWI_IMR					0x002c
-+#define TWI_RHR					0x0030
-+#define TWI_THR					0x0034
-+
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET			0
-+#define TWI_START_SIZE				1
-+#define TWI_STOP_OFFSET				1
-+#define TWI_STOP_SIZE				1
-+#define TWI_MSEN_OFFSET				2
-+#define TWI_MSEN_SIZE				1
-+#define TWI_MSDIS_OFFSET			3
-+#define TWI_MSDIS_SIZE				1
-+#define TWI_SVEN_OFFSET				4
-+#define TWI_SVEN_SIZE				1
-+#define TWI_SVDIS_OFFSET			5
-+#define TWI_SVDIS_SIZE				1
-+#define TWI_SWRST_OFFSET			7
-+#define TWI_SWRST_SIZE				1
-+
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET			8
-+#define TWI_IADRSZ_SIZE				2
-+#define TWI_MREAD_OFFSET			12
-+#define TWI_MREAD_SIZE				1
-+#define TWI_DADR_OFFSET				16
-+#define TWI_DADR_SIZE				7
-+
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET				16
-+#define TWI_SADR_SIZE				7
-+
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET				0
-+#define TWI_IADR_SIZE				24
-+
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET			0
-+#define TWI_CLDIV_SIZE				8
-+#define TWI_CHDIV_OFFSET			8
-+#define TWI_CHDIV_SIZE				8
-+#define TWI_CKDIV_OFFSET			16
-+#define TWI_CKDIV_SIZE				3
-+
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET			0
-+#define TWI_TXCOMP_SIZE				1
-+#define TWI_RXRDY_OFFSET			1
-+#define TWI_RXRDY_SIZE				1
-+#define TWI_TXRDY_OFFSET			2
-+#define TWI_TXRDY_SIZE				1
-+#define TWI_SVDIR_OFFSET			3
-+#define TWI_SVDIR_SIZE				1
-+#define TWI_SVACC_OFFSET			4
-+#define TWI_SVACC_SIZE				1
-+#define TWI_GCACC_OFFSET			5
-+#define TWI_GCACC_SIZE				1
-+#define TWI_OVRE_OFFSET				6
-+#define TWI_OVRE_SIZE				1
-+#define TWI_UNRE_OFFSET				7
-+#define TWI_UNRE_SIZE				1
-+#define TWI_NACK_OFFSET				8
-+#define TWI_NACK_SIZE				1
-+#define TWI_ARBLST_OFFSET			9
-+#define TWI_ARBLST_SIZE				1
-+
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET			0
-+#define TWI_RXDATA_SIZE				8
-+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET			0
-+#define TWI_TXDATA_SIZE				8
-+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR			0
-+#define TWI_IADRSZ_ONE_BYTE			1
-+#define TWI_IADRSZ_TWO_BYTES			2
-+#define TWI_IADRSZ_THREE_BYTES			3
-+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name)					\
-+	(1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name,value)				\
-+	(((value) & ((1 << TWI_##name##_SIZE) - 1))	\
-+	 << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name,value)				\
-+	(((value) >> TWI_##name##_OFFSET)		\
-+	 & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name,value,old)			\
-+	(((old) & ~(((1 << TWI_##name##_SIZE) - 1)	\
-+		    << TWI_##name##_OFFSET))		\
-+	 | TWI_BF(name,value))
-+
-+/* Register access macros */
-+#define twi_readl(port,reg)				\
-+	__raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port,reg,value)			\
-+	__raw_writel((value), (port)->regs + TWI_##reg)
-+
-+#endif /* __ASM_AVR32_TWI_H__ */
-diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
-new file mode 100644
-index 0000000..9a3f223
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.c
-@@ -0,0 +1,383 @@
-+/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
-+ *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes
-+ * <ekrangnes at atmel.com>
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
-+ *
-+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
-+ * bugs removed, interrupt routine markedly rewritten
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <asm/io.h>
-+#include <linux/time.h>
-+#include "atmeltwi.h"
-+
-+static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
-+
-+
-+struct atmel_twi {
-+	void __iomem *regs;
-+	struct i2c_adapter adapter;
-+	struct clk *pclk;
-+	spinlock_t lock;
-+	struct completion comp;
-+	u32 intmask;
-+	u8 *buf;
-+	u8 len;
-+	u8 acks_left;
-+	u8 nack;
-+	unsigned int irq;
-+
-+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
-+
-+/*
-+ * Initialize the TWI hardware registers.
-+ */
-+static int __devinit twi_hwinit(struct atmel_twi *twi)
-+{
-+	unsigned long cdiv, ckdiv=0;
-+
-+	twi_writel(twi, IDR, ~0UL);
-+	twi_writel(twi, CR, TWI_BIT(SWRST));	/*Reset peripheral*/
-+	twi_readl(twi, SR);
-+
-+	cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
-+
-+	while (cdiv > 255) {
-+		ckdiv++;
-+		cdiv = cdiv >> 1;
-+	}
-+
-+	if (ckdiv > 7)
-+		return -EINVAL;
-+	else
-+		twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
-+			       | TWI_BF(CHDIV, cdiv)
-+			       | TWI_BF(CLDIV, cdiv)));
-+	return 0;
-+}
-+
-+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out (~100ms).
-+ */
-+static short twi_complete(struct atmel_twi *twi, u32 mask)
-+{
-+	int timeout = msecs_to_jiffies(100);
-+
-+	twi->intmask = mask;
-+	init_completion(&twi->comp);
-+
-+	twi_writel(twi, IER, mask);
-+
-+	if (!wait_for_completion_timeout(&twi->comp, timeout)) {
-+		/* RESET TWI interface */
-+		twi_writel(twi, CR, TWI_BIT(SWRST));
-+
-+		/* Reinitialize TWI */
-+		twi_hwinit(twi);
-+
-+		return -ETIMEDOUT;
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * Generic i2c master transfer entrypoint.
-+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
-+{
-+	struct atmel_twi *twi = to_atmel_twi(adap);
-+	struct i2c_msg *pmsg;
-+	int i;
-+
-+	/* get first message */
-+	pmsg = msgs;
-+
-+	dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
-+
-+	twi->nack = 0;
-+	for (i = 0; i < num; i++, pmsg++) {
-+		twi->len = pmsg->len;
-+		twi->buf = pmsg->buf;
-+		twi->acks_left = pmsg->len;
-+		twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+			(pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+		twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
-+
-+		dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
-+			i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+			pmsg->len > 1 ? "s" : "",
-+			pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
-+
-+		/* enable */
-+		twi_writel(twi, CR, TWI_BIT(MSEN));
-+
-+		if (pmsg->flags & I2C_M_RD) {
-+			if (twi->len == 1)
-+				twi_writel(twi, CR,
-+					TWI_BIT(START) | TWI_BIT(STOP));
-+			else
-+				twi_writel(twi, CR, TWI_BIT(START));
-+
-+			if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
-+				dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
-+					twi->acks_left);
-+				return -ETIMEDOUT;
-+			}
-+		} else {
-+			twi_writel(twi, THR, twi->buf[0]);
-+			if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
-+				dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
-+				twi->acks_left);
-+				return -ETIMEDOUT;
-+			}
-+
-+			if (twi->nack)
-+			    return -ENODEV;
-+		}
-+
-+		/* Disable TWI interface */
-+		twi_writel(twi, CR, TWI_BIT(MSDIS));
-+
-+	} /* end cur msg */
-+
-+	return i;
-+}
-+
-+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id)
-+{
-+	struct atmel_twi *twi = dev_id;
-+	int status = twi_readl(twi, SR);
-+
-+	/* Save state for later debug prints */
-+	int old_mask = twi->intmask;
-+	int old_status = status;
-+
-+	if (twi->intmask & status) {
-+		if (status & TWI_BIT(NACK))
-+			goto nack;
-+
-+		status &= twi->intmask;
-+
-+		if (status & TWI_BIT(TXCOMP))
-+		    goto complete;
-+
-+		else if (status & TWI_BIT(RXRDY)) {
-+			if ( twi->acks_left > 0 ) {
-+			    twi->buf[twi->len - twi->acks_left] =
-+				twi_readl(twi, RHR);
-+			    twi->acks_left--;
-+			}
-+			if ( twi->acks_left == 1 )
-+				twi_writel(twi, CR, TWI_BIT(STOP));
-+
-+			if (twi->acks_left == 0 ) {
-+				twi->intmask = TWI_BIT(TXCOMP);
-+				twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+			}
-+		} else if (status & TWI_BIT(TXRDY)) {
-+			twi->acks_left--;
-+			if ( twi->acks_left == 0 ) {
-+				twi->intmask = TWI_BIT(TXCOMP);
-+				twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+			} else if (twi->acks_left > 0)
-+				twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
-+		}
-+	}
-+
-+	dev_dbg(&twi->adapter.dev,
-+		"TWI ISR, SR 0x%08X, intmask 0x%08X, acks_left %i.\n",
-+		old_status, old_mask, twi->acks_left);
-+
-+	return IRQ_HANDLED;
-+
-+nack:
-+	dev_dbg(&twi->adapter.dev, "NACK received!\n");
-+	twi->nack = 1;
-+
-+complete:
-+	twi_writel(twi, IDR, ~0UL);
-+	complete(&twi->comp);
-+
-+	dev_dbg(&twi->adapter.dev,
-+		"TWI ISR, SR 0x%08X, intmask 0x%08X, \
-+		acks_left %i - completed.\n",
-+		old_status, old_mask, twi->acks_left);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * Return list of supported functionality.
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
-+{
-+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+/* For now, we only handle combined mode (smbus) */
-+static struct i2c_algorithm twi_algorithm = {
-+	.master_xfer	= twi_xfer,
-+	.functionality	= twi_func,
-+};
-+
-+/*
-+ * Main initialization routine.
-+ */
-+static int __devinit twi_probe(struct platform_device *pdev)
-+{
-+	struct atmel_twi *twi;
-+	struct resource *regs;
-+	struct clk *pclk;
-+	struct i2c_adapter *adapter;
-+	int rc, irq;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+
-+	pclk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(pclk))
-+		return PTR_ERR(pclk);
-+	clk_enable(pclk);
-+
-+	rc = -ENOMEM;
-+	twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+	if (!twi) {
-+		dev_err(&pdev->dev, "can't allocate interface!\n");
-+		goto err_alloc_twi;
-+	}
-+
-+	twi->pclk = pclk;
-+	twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!twi->regs)
-+		goto err_ioremap;
-+
-+	irq = platform_get_irq(pdev,0);
-+	rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+	if (rc) {
-+		dev_err(&pdev->dev, "can't bind irq!\n");
-+		goto err_irq;
-+	}
-+	twi->irq = irq;
-+
-+	rc = twi_hwinit(twi);
-+	if (rc) {
-+		dev_err(&pdev->dev, "Unable to set baudrate\n");
-+		goto err_hw_init;
-+	}
-+
-+	adapter = &twi->adapter;
-+	sprintf(adapter->name, "TWI");
-+	adapter->algo = &twi_algorithm;
-+	adapter->class = I2C_CLASS_HWMON;
-+	adapter->dev.parent = &pdev->dev;
-+
-+	platform_set_drvdata(pdev, twi);
-+
-+	rc = i2c_add_adapter(adapter);
-+	if (rc) {
-+		dev_err(&pdev->dev, "Adapter %s registration failed\n",
-+			adapter->name);
-+		goto err_register;
-+	}
-+
-+	dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
-+		 baudrate/1000, (unsigned long)regs->start);
-+
-+	return 0;
-+
-+
-+err_register:
-+	platform_set_drvdata(pdev, NULL);
-+
-+err_hw_init:
-+	free_irq(irq, twi);
-+
-+err_irq:
-+	iounmap(twi->regs);
-+
-+err_ioremap:
-+	kfree(twi);
-+
-+err_alloc_twi:
-+	clk_disable(pclk);
-+	clk_put(pclk);
-+
-+	return rc;
-+}
-+
-+static int __devexit twi_remove(struct platform_device *pdev)
-+{
-+	struct atmel_twi *twi = platform_get_drvdata(pdev);
-+	int res;
-+
-+	platform_set_drvdata(pdev, NULL);
-+	res = i2c_del_adapter(&twi->adapter);
-+	twi_writel(twi, CR, TWI_BIT(MSDIS));
-+	iounmap(twi->regs);
-+	clk_disable(twi->pclk);
-+	clk_put(twi->pclk);
-+	free_irq(twi->irq, twi);
-+	kfree(twi);
-+
-+	return res;
-+}
-+
-+static struct platform_driver twi_driver = {
-+	.probe		= twi_probe,
-+	.remove		= __devexit_p(twi_remove),
-+	.driver		= {
-+		.name	= "atmel_twi",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init atmel_twi_init(void)
-+{
-+	return platform_driver_register(&twi_driver);
-+}
-+
-+static void __exit atmel_twi_exit(void)
-+{
-+	platform_driver_unregister(&twi_driver);
-+}
-+
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
-+
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
-index 50e06e8..7bbea09 100644
---- a/drivers/input/mouse/Kconfig
-+++ b/drivers/input/mouse/Kconfig
-@@ -216,4 +216,20 @@ config MOUSE_HIL
- 	help
- 	  Say Y here to support HIL pointers.
- 
-+config MOUSE_GPIO
-+	tristate "GPIO mouse"
-+	depends on GENERIC_GPIO
-+	select INPUT_POLLDEV
-+	help
-+	  This driver simulates a mouse on GPIO lines of various CPUs (and some
-+	  other chips).
-+
-+	  Say Y here if your device has buttons or a simple joystick connected
-+	  directly to GPIO lines. Your board-specific setup logic must also
-+	  provide a platform device and platform data saying which GPIOs are
-+	  used.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called gpio_mouse.
-+
- endif
-diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
-index aa4ba87..9e6e363 100644
---- a/drivers/input/mouse/Makefile
-+++ b/drivers/input/mouse/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_MOUSE_PS2)		+= psmouse.o
- obj-$(CONFIG_MOUSE_SERIAL)	+= sermouse.o
- obj-$(CONFIG_MOUSE_HIL)		+= hil_ptr.o
- obj-$(CONFIG_MOUSE_VSXXXAA)	+= vsxxxaa.o
-+obj-$(CONFIG_MOUSE_GPIO)	+= gpio_mouse.o
- 
- psmouse-objs := psmouse-base.o synaptics.o
- 
-diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
-new file mode 100644
-index 0000000..0936d6b
---- /dev/null
-+++ b/drivers/input/mouse/gpio_mouse.c
-@@ -0,0 +1,196 @@
-+/*
-+ * Driver for simulating a mouse on GPIO lines.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/input-polldev.h>
-+#include <linux/gpio_mouse.h>
-+
-+#include <asm/gpio.h>
-+
-+/*
-+ * Timer function which is run every scan_ms ms when the device is opened.
-+ * The dev input varaible is set to the the input_dev pointer.
-+ */
-+static void gpio_mouse_scan(struct input_polled_dev *dev)
-+{
-+	struct gpio_mouse_platform_data *gpio = dev->private;
-+	struct input_dev *input = dev->input;
-+	int x, y;
-+
-+	if (gpio->bleft >= 0)
-+		input_report_key(input, BTN_LEFT,
-+				gpio_get_value(gpio->bleft) ^ gpio->polarity);
-+	if (gpio->bmiddle >= 0)
-+		input_report_key(input, BTN_MIDDLE,
-+				gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
-+	if (gpio->bright >= 0)
-+		input_report_key(input, BTN_RIGHT,
-+				gpio_get_value(gpio->bright) ^ gpio->polarity);
-+
-+	x = (gpio_get_value(gpio->right) ^ gpio->polarity)
-+		- (gpio_get_value(gpio->left) ^ gpio->polarity);
-+	y = (gpio_get_value(gpio->down) ^ gpio->polarity)
-+		- (gpio_get_value(gpio->up) ^ gpio->polarity);
-+
-+	input_report_rel(input, REL_X, x);
-+	input_report_rel(input, REL_Y, y);
-+	input_sync(input);
-+}
-+
-+static int __init gpio_mouse_probe(struct platform_device *pdev)
-+{
-+	struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
-+	struct input_polled_dev *input_poll;
-+	struct input_dev *input;
-+	int pin, i;
-+	int error;
-+
-+	if (!pdata) {
-+		dev_err(&pdev->dev, "no platform data\n");
-+		error = -ENXIO;
-+		goto out;
-+	}
-+
-+	if (pdata->scan_ms < 0) {
-+		dev_err(&pdev->dev, "invalid scan time\n");
-+		error = -EINVAL;
-+		goto out;
-+	}
-+
-+	for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
-+		pin = pdata->pins[i];
-+
-+		if (pin < 0) {
-+
-+			if (i <= GPIO_MOUSE_PIN_RIGHT) {
-+				/* Mouse direction is required. */
-+				dev_err(&pdev->dev,
-+					"missing GPIO for directions\n");
-+				error = -EINVAL;
-+				goto out_free_gpios;
-+			}
-+
-+			if (i == GPIO_MOUSE_PIN_BLEFT)
-+				dev_dbg(&pdev->dev, "no left button defined\n");
-+
-+		} else {
-+			error = gpio_request(pin, "gpio_mouse");
-+			if (error) {
-+				dev_err(&pdev->dev, "fail %d pin (%d idx)\n",
-+					pin, i);
-+				goto out_free_gpios;
-+			}
-+
-+			gpio_direction_input(pin);
-+		}
-+	}
-+
-+	input_poll = input_allocate_polled_device();
-+	if (!input_poll) {
-+		dev_err(&pdev->dev, "not enough memory for input device\n");
-+		error = -ENOMEM;
-+		goto out_free_gpios;
-+	}
-+
-+	platform_set_drvdata(pdev, input_poll);
-+
-+	/* set input-polldev handlers */
-+	input_poll->private = pdata;
-+	input_poll->poll = gpio_mouse_scan;
-+	input_poll->poll_interval = pdata->scan_ms;
-+
-+	input = input_poll->input;
-+	input->name = pdev->name;
-+	input->id.bustype = BUS_HOST;
-+	input->dev.parent = &pdev->dev;
-+
-+	input_set_capability(input, EV_REL, REL_X);
-+	input_set_capability(input, EV_REL, REL_Y);
-+	if (pdata->bleft >= 0)
-+		input_set_capability(input, EV_KEY, BTN_LEFT);
-+	if (pdata->bmiddle >= 0)
-+		input_set_capability(input, EV_KEY, BTN_MIDDLE);
-+	if (pdata->bright >= 0)
-+		input_set_capability(input, EV_KEY, BTN_RIGHT);
-+
-+	error = input_register_polled_device(input_poll);
-+	if (error) {
-+		dev_err(&pdev->dev, "could not register input device\n");
-+		goto out_free_polldev;
-+	}
-+
-+	dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
-+			pdata->scan_ms,
-+			pdata->bleft < 0 ? "" : "left ",
-+			pdata->bmiddle < 0 ? "" : "middle ",
-+			pdata->bright < 0 ? "" : "right");
-+
-+	return 0;
-+
-+ out_free_polldev:
-+	input_free_polled_device(input_poll);
-+	platform_set_drvdata(pdev, NULL);
-+
-+ out_free_gpios:
-+	while (--i >= 0) {
-+		pin = pdata->pins[i];
-+		if (pin)
-+			gpio_free(pin);
-+	}
-+ out:
-+	return error;
-+}
-+
-+static int __devexit gpio_mouse_remove(struct platform_device *pdev)
-+{
-+	struct input_polled_dev *input = platform_get_drvdata(pdev);
-+	struct gpio_mouse_platform_data *pdata = input->private;
-+	int pin, i;
-+
-+	input_unregister_polled_device(input);
-+	input_free_polled_device(input);
-+
-+	for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
-+		pin = pdata->pins[i];
-+		if (pin >= 0)
-+			gpio_free(pin);
-+	}
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+
-+struct platform_driver gpio_mouse_device_driver = {
-+	.remove		= __devexit_p(gpio_mouse_remove),
-+	.driver		= {
-+		.name	= "gpio_mouse",
-+	}
-+};
-+
-+static int __init gpio_mouse_init(void)
-+{
-+	return platform_driver_probe(&gpio_mouse_device_driver,
-+			gpio_mouse_probe);
-+}
-+module_init(gpio_mouse_init);
-+
-+static void __exit gpio_mouse_exit(void)
-+{
-+	platform_driver_unregister(&gpio_mouse_device_driver);
-+}
-+module_exit(gpio_mouse_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("GPIO mouse driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
-index 87d2046..9ce3ca1 100644
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -95,6 +95,14 @@ config LEDS_COBALT
- 	help
- 	  This option enables support for the front LED on Cobalt Server
- 
-+config LEDS_GPIO
-+	tristate "LED Support for GPIO connected LEDs"
-+	depends on LEDS_CLASS && GENERIC_GPIO
-+	help
-+	  This option enables support for the LEDs connected to GPIO
-+	  outputs. To be useful the particular board must have LEDs
-+	  and they must be connected to the GPIO lines.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
-diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
-index aa2c18e..f8995c9 100644
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
-+obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
-new file mode 100644
-index 0000000..47d90db
---- /dev/null
-+++ b/drivers/leds/leds-gpio.c
-@@ -0,0 +1,199 @@
-+/*
-+ * LEDs driver for GPIOs
-+ *
-+ * Copyright (C) 2007 8D Technologies inc.
-+ * Raphael Assenat <raph@8d.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/workqueue.h>
-+
-+#include <asm/gpio.h>
-+
-+struct gpio_led_data {
-+	struct led_classdev cdev;
-+	unsigned gpio;
-+	struct work_struct work;
-+	u8 new_level;
-+	u8 can_sleep;
-+	u8 active_low;
-+};
-+
-+static void gpio_led_work(struct work_struct *work)
-+{
-+	struct gpio_led_data	*led_dat =
-+		container_of(work, struct gpio_led_data, work);
-+
-+	gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
-+}
-+
-+static void gpio_led_set(struct led_classdev *led_cdev,
-+	enum led_brightness value)
-+{
-+	struct gpio_led_data *led_dat =
-+		container_of(led_cdev, struct gpio_led_data, cdev);
-+	int level;
-+
-+	if (value == LED_OFF)
-+		level = 0;
-+	else
-+		level = 1;
-+
-+	if (led_dat->active_low)
-+		level = !level;
-+
-+	/* setting GPIOs with I2C/etc requires a preemptible task context */
-+	if (led_dat->can_sleep) {
-+		if (preempt_count()) {
-+			led_dat->new_level = level;
-+			schedule_work(&led_dat->work);
-+		} else
-+			gpio_set_value_cansleep(led_dat->gpio, level);
-+	} else
-+		gpio_set_value(led_dat->gpio, level);
-+}
-+
-+static int __init gpio_led_probe(struct platform_device *pdev)
-+{
-+	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+	struct gpio_led *cur_led;
-+	struct gpio_led_data *leds_data, *led_dat;
-+	int i, ret = 0;
-+
-+	if (!pdata)
-+		return -EBUSY;
-+
-+	leds_data = kzalloc(sizeof(struct gpio_led_data) * pdata->num_leds,
-+				GFP_KERNEL);
-+	if (!leds_data)
-+		return -ENOMEM;
-+
-+	for (i = 0; i < pdata->num_leds; i++) {
-+		cur_led = &pdata->leds[i];
-+		led_dat = &leds_data[i];
-+
-+		led_dat->cdev.name = cur_led->name;
-+		led_dat->cdev.default_trigger = cur_led->default_trigger;
-+		led_dat->gpio = cur_led->gpio;
-+		led_dat->can_sleep = gpio_cansleep(cur_led->gpio);
-+		led_dat->active_low = cur_led->active_low;
-+		led_dat->cdev.brightness_set = gpio_led_set;
-+		led_dat->cdev.brightness = cur_led->active_low ? LED_FULL : LED_OFF;
-+
-+		ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
-+		if (ret < 0)
-+			goto err;
-+
-+		gpio_direction_output(led_dat->gpio, led_dat->active_low);
-+
-+		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-+		if (ret < 0) {
-+			gpio_free(led_dat->gpio);
-+			goto err;
-+		}
-+
-+		INIT_WORK(&led_dat->work, gpio_led_work);
-+	}
-+
-+	platform_set_drvdata(pdev, leds_data);
-+
-+	return 0;
-+
-+err:
-+	if (i > 0) {
-+		for (i = i - 1; i >= 0; i--) {
-+			led_classdev_unregister(&leds_data[i].cdev);
-+			gpio_free(leds_data[i].gpio);
-+		}
-+	}
-+
-+	flush_scheduled_work();
-+	kfree(leds_data);
-+
-+	return ret;
-+}
-+
-+static int __exit gpio_led_remove(struct platform_device *pdev)
-+{
-+	int i;
-+	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+	struct gpio_led_data *leds_data;
-+
-+	leds_data = platform_get_drvdata(pdev);
-+
-+	for (i = 0; i < pdata->num_leds; i++) {
-+		led_classdev_unregister(&leds_data[i].cdev);
-+		gpio_free(leds_data[i].gpio);
-+	}
-+	
-+	kfree(leds_data);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int gpio_led_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+	struct gpio_led_data *leds_data;
-+	int i;
-+	
-+	leds_data = platform_get_drvdata(pdev);
-+
-+	for (i = 0; i < pdata->num_leds; i++)
-+		led_classdev_suspend(&leds_data[i].cdev);
-+
-+	return 0;
-+}
-+
-+static int gpio_led_resume(struct platform_device *pdev)
-+{
-+	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+	struct gpio_led_data *leds_data;
-+	int i;
-+
-+	leds_data = platform_get_drvdata(pdev);
-+
-+	for (i = 0; i < pdata->num_leds; i++)
-+		led_classdev_resume(&leds_data[i].cdev);
-+
-+	return 0;
-+}
-+#else
-+#define gpio_led_suspend NULL
-+#define gpio_led_resume NULL
-+#endif
-+
-+static struct platform_driver gpio_led_driver = {
-+	.remove		= __exit_p(gpio_led_remove),
-+	.suspend	= gpio_led_suspend,
-+	.resume		= gpio_led_resume,
-+	.driver		= {
-+		.name	= "leds-gpio",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init gpio_led_init(void)
-+{
-+	return platform_driver_probe(&gpio_led_driver, gpio_led_probe);
-+}
-+
-+static void __exit gpio_led_exit(void)
-+{
-+	platform_driver_unregister(&gpio_led_driver);
-+}
-+
-+module_init(gpio_led_init);
-+module_exit(gpio_led_exit);
-+
-+MODULE_AUTHOR("Raphael Assenat <raph@8d.com>");
-+MODULE_DESCRIPTION("GPIO LED driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index 616eee9..0810d83 100644
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -187,5 +187,15 @@ config THINKPAD_ACPI_BAY
- 
- 	  If you are not sure, say Y here.
- 
-+config ATMEL_SSC
-+	tristate "Device driver for Atmel SSC peripheral"
-+	depends on AVR32 || ARCH_AT91
-+	---help---
-+	  This option enables device driver support for Atmel Syncronized
-+	  Serial Communication peripheral (SSC).
-+
-+	  The SSC peripheral supports a wide variety of serial frame based
-+	  communications, i.e. I2S, SPI, etc.
- 
-+	  If unsure, say N.
- endmenu
-diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
-index 8abbf2f..2d52cc6 100644
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -14,3 +14,4 @@ obj-$(CONFIG_PHANTOM)		+= phantom.o
- obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
- obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
- obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
-+obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
-diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
-new file mode 100644
-index 0000000..058ccac
---- /dev/null
-+++ b/drivers/misc/atmel-ssc.c
-@@ -0,0 +1,174 @@
-+/*
-+ * Atmel SSC driver
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/list.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/list.h>
-+#include <linux/spinlock.h>
-+#include <linux/atmel-ssc.h>
-+
-+/* Serialize access to ssc_list and user count */
-+static DEFINE_SPINLOCK(user_lock);
-+static LIST_HEAD(ssc_list);
-+
-+struct ssc_device *ssc_request(unsigned int ssc_num)
-+{
-+	int ssc_valid = 0;
-+	struct ssc_device *ssc;
-+
-+	spin_lock(&user_lock);
-+	list_for_each_entry(ssc, &ssc_list, list) {
-+		if (ssc->pdev->id == ssc_num) {
-+			ssc_valid = 1;
-+			break;
-+		}
-+	}
-+
-+	if (!ssc_valid) {
-+		spin_unlock(&user_lock);
-+		dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
-+		return ERR_PTR(-ENODEV);
-+	}
-+
-+	if (ssc->user) {
-+		spin_unlock(&user_lock);
-+		dev_dbg(&ssc->pdev->dev, "module busy\n");
-+		return ERR_PTR(-EBUSY);
-+	}
-+	ssc->user++;
-+	spin_unlock(&user_lock);
-+
-+	clk_enable(ssc->clk);
-+
-+	return ssc;
-+}
-+EXPORT_SYMBOL(ssc_request);
-+
-+void ssc_free(struct ssc_device *ssc)
-+{
-+	spin_lock(&user_lock);
-+	if (ssc->user) {
-+		ssc->user--;
-+		clk_disable(ssc->clk);
-+	} else {
-+		dev_dbg(&ssc->pdev->dev, "device already free\n");
-+	}
-+	spin_unlock(&user_lock);
-+}
-+EXPORT_SYMBOL(ssc_free);
-+
-+static int __init ssc_probe(struct platform_device *pdev)
-+{
-+	int retval = 0;
-+	struct resource *regs;
-+	struct ssc_device *ssc;
-+
-+	ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
-+	if (!ssc) {
-+		dev_dbg(&pdev->dev, "out of memory\n");
-+		retval = -ENOMEM;
-+		goto out;
-+	}
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_dbg(&pdev->dev, "no mmio resource defined\n");
-+		retval = -ENXIO;
-+		goto out_free;
-+	}
-+
-+	ssc->clk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(ssc->clk)) {
-+		dev_dbg(&pdev->dev, "no pclk clock defined\n");
-+		retval = -ENXIO;
-+		goto out_free;
-+	}
-+
-+	ssc->pdev = pdev;
-+	ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!ssc->regs) {
-+		dev_dbg(&pdev->dev, "ioremap failed\n");
-+		retval = -EINVAL;
-+		goto out_clk;
-+	}
-+
-+	/* disable all interrupts */
-+	clk_enable(ssc->clk);
-+	ssc_writel(ssc->regs, IDR, ~0UL);
-+	ssc_readl(ssc->regs, SR);
-+	clk_disable(ssc->clk);
-+
-+	ssc->irq = platform_get_irq(pdev, 0);
-+	if (!ssc->irq) {
-+		dev_dbg(&pdev->dev, "could not get irq\n");
-+		retval = -ENXIO;
-+		goto out_unmap;
-+	}
-+
-+	spin_lock(&user_lock);
-+	list_add_tail(&ssc->list, &ssc_list);
-+	spin_unlock(&user_lock);
-+
-+	platform_set_drvdata(pdev, ssc);
-+
-+	dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
-+			ssc->regs, ssc->irq);
-+
-+	goto out;
-+
-+out_unmap:
-+	iounmap(ssc->regs);
-+out_clk:
-+	clk_put(ssc->clk);
-+out_free:
-+	kfree(ssc);
-+out:
-+	return retval;
-+}
-+
-+static int __devexit ssc_remove(struct platform_device *pdev)
-+{
-+	struct ssc_device *ssc = platform_get_drvdata(pdev);
-+
-+	spin_lock(&user_lock);
-+	iounmap(ssc->regs);
-+	clk_put(ssc->clk);
-+	list_del(&ssc->list);
-+	kfree(ssc);
-+	spin_unlock(&user_lock);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver ssc_driver = {
-+	.remove		= __devexit_p(ssc_remove),
-+	.driver		= {
-+		.name		= "ssc",
-+	},
-+};
-+
-+static int __init ssc_init(void)
-+{
-+	return platform_driver_probe(&ssc_driver, ssc_probe);
-+}
-+module_init(ssc_init);
-+
-+static void __exit ssc_exit(void)
-+{
-+	platform_driver_unregister(&ssc_driver);
-+}
-+module_exit(ssc_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index e23082f..1de1716 100644
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -74,6 +74,16 @@ config MMC_AT91
- 
- 	  If unsure, say N.
- 
-+config MMC_ATMELMCI
-+	tristate "Atmel Multimedia Card Interface support"
-+	depends on AVR32 && MMC
-+	help
-+	  This selects the Atmel Multimedia Card Interface. If you have
-+	  a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
-+	  slot, say Y or M here.
-+
-+	  If unsure, say N.
-+
- config MMC_IMX
- 	tristate "Motorola i.MX Multimedia Card Interface support"
- 	depends on ARCH_IMX
-diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
-index 6685f64..4b8e6e2 100644
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -14,5 +14,6 @@ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
- obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
- obj-$(CONFIG_MMC_OMAP)		+= omap.o
- obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
- 
-diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
-new file mode 100644
-index 0000000..74d343f
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.c
-@@ -0,0 +1,1217 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/blkdev.h>
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/mmc/host.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "atmel-mci.h"
-+
-+#define DRIVER_NAME "atmel_mci"
-+
-+#define MCI_CMD_ERROR_FLAGS	(MCI_BIT(RINDE)	| MCI_BIT(RDIRE) |	\
-+				 MCI_BIT(RCRCE) | MCI_BIT(RENDE) |	\
-+				 MCI_BIT(RTOE))
-+#define MCI_DATA_ERROR_FLAGS	(MCI_BIT(DCRCE) | MCI_BIT(DTOE) |	\
-+				 MCI_BIT(OVRE) | MCI_BIT(UNRE))
-+
-+enum {
-+	EVENT_CMD_COMPLETE = 0,
-+	EVENT_CMD_ERROR,
-+	EVENT_DATA_COMPLETE,
-+	EVENT_DATA_ERROR,
-+	EVENT_STOP_SENT,
-+	EVENT_STOP_COMPLETE,
-+	EVENT_STOP_ERROR,
-+	EVENT_DMA_ERROR,
-+	EVENT_CARD_DETECT,
-+};
-+
-+struct atmel_mci_dma {
-+	struct dma_request_sg	req;
-+	unsigned short		rx_periph_id;
-+	unsigned short		tx_periph_id;
-+};
-+
-+struct atmel_mci {
-+	struct mmc_host		*mmc;
-+	void __iomem		*regs;
-+	struct atmel_mci_dma	dma;
-+
-+	struct mmc_request	*mrq;
-+	struct mmc_command	*cmd;
-+	struct mmc_data		*data;
-+
-+	u32			stop_cmdr;
-+	u32			stop_iflags;
-+
-+	struct tasklet_struct	tasklet;
-+	unsigned long		pending_events;
-+	unsigned long		completed_events;
-+	u32			error_status;
-+
-+	int			present;
-+	int			detect_pin;
-+	int			wp_pin;
-+
-+	unsigned long		bus_hz;
-+	unsigned long		mapbase;
-+	struct clk		*mck;
-+	struct platform_device	*pdev;
-+
-+#ifdef CONFIG_DEBUG_FS
-+	struct dentry		*debugfs_root;
-+	struct dentry		*debugfs_regs;
-+	struct dentry		*debugfs_req;
-+	struct dentry		*debugfs_pending_events;
-+	struct dentry		*debugfs_completed_events;
-+#endif
-+};
-+
-+/* Those printks take an awful lot of time... */
-+#ifndef DEBUG
-+static unsigned int fmax = 15000000U;
-+#else
-+static unsigned int fmax = 1000000U;
-+#endif
-+module_param(fmax, uint, 0444);
-+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
-+
-+/* Test bit macros for completed events */
-+#define mci_cmd_is_complete(host)			\
-+	test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_cmd_error_is_complete(host)			\
-+	test_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_data_is_complete(host)			\
-+	test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_data_error_is_complete(host)		\
-+	test_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_stop_sent_is_complete(host)			\
-+	test_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_stop_is_complete(host)			\
-+	test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_stop_error_is_complete(host)		\
-+	test_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_dma_error_is_complete(host)			\
-+	test_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_card_detect_is_complete(host)			\
-+	test_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Test and clear bit macros for pending events */
-+#define mci_clear_cmd_is_pending(host)			\
-+	test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_cmd_error_is_pending(host)		\
-+	test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_clear_data_is_pending(host)			\
-+	test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_is_pending(host)		\
-+	test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_is_pending(host)		\
-+	test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_is_pending(host)			\
-+	test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_stop_error_is_pending(host)		\
-+	test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_clear_dma_error_is_pending(host)		\
-+	test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_is_pending(host)		\
-+	test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Test and set bit macros for completed events */
-+#define mci_set_cmd_is_completed(host)			\
-+	test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_cmd_error_is_completed(host)		\
-+	test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_set_data_is_completed(host)			\
-+	test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_is_completed(host)		\
-+	test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_is_completed(host)		\
-+	test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_is_completed(host)			\
-+	test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_stop_error_is_completed(host)		\
-+	test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_set_dma_error_is_completed(host)		\
-+	test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_is_completed(host)		\
-+	test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for completed events */
-+#define mci_set_cmd_complete(host)			\
-+	set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_cmd_error_complete(host)		\
-+	set_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_set_data_complete(host)			\
-+	set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_complete(host)		\
-+	set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_complete(host)		\
-+	set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_complete(host)			\
-+	set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_stop_error_complete(host)		\
-+	set_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_set_dma_error_complete(host)		\
-+	set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_complete(host)		\
-+	set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for pending events */
-+#define mci_set_cmd_pending(host)			\
-+	set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_set_cmd_error_pending(host)			\
-+	set_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_set_data_pending(host)			\
-+	set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_set_data_error_pending(host)		\
-+	set_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_set_stop_sent_pending(host)			\
-+	set_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_set_stop_pending(host)			\
-+	set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_set_stop_error_pending(host)		\
-+	set_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_set_dma_error_pending(host)			\
-+	set_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_set_card_detect_pending(host)		\
-+	set_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Clear bit macros for pending events */
-+#define mci_clear_cmd_pending(host)			\
-+	clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_cmd_error_pending(host)		\
-+	clear_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_clear_data_pending(host)			\
-+	clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_pending(host)		\
-+	clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_pending(host)		\
-+	clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_pending(host)			\
-+	clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_stop_error_pending(host)		\
-+	clear_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_clear_dma_error_pending(host)		\
-+	clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_pending(host)		\
-+	clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+
-+#define DBG_REQ_BUF_SIZE	(4096 - sizeof(unsigned int))
-+
-+struct req_dbg_data {
-+	unsigned int nbytes;
-+	char str[DBG_REQ_BUF_SIZE];
-+};
-+
-+static int req_dbg_open(struct inode *inode, struct file *file)
-+{
-+	struct atmel_mci *host;
-+	struct mmc_request *mrq;
-+	struct mmc_command *cmd, *stop;
-+	struct mmc_data *data;
-+	struct req_dbg_data *priv;
-+	char *str;
-+	unsigned long n = 0;
-+
-+	priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+	str = priv->str;
-+
-+	mutex_lock(&inode->i_mutex);
-+	host = inode->i_private;
-+
-+	spin_lock_irq(&host->mmc->lock);
-+	mrq = host->mrq;
-+	if (mrq) {
-+		cmd = mrq->cmd;
-+		data = mrq->data;
-+		stop = mrq->stop;
-+		n = snprintf(str, DBG_REQ_BUF_SIZE,
-+			     "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+			     cmd->opcode, cmd->arg, cmd->flags,
-+			     cmd->resp[0], cmd->resp[1], cmd->resp[2],
-+			     cmd->resp[3], cmd->error);
-+		if (n < DBG_REQ_BUF_SIZE && data)
-+			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+				      "DATA %u * %u (%u) %x (err %u)\n",
-+				      data->blocks, data->blksz,
-+				      data->bytes_xfered, data->flags,
-+				      data->error);
-+		if (n < DBG_REQ_BUF_SIZE && stop)
-+			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+				      "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+				      stop->opcode, stop->arg, stop->flags,
-+				      stop->resp[0], stop->resp[1],
-+				      stop->resp[2], stop->resp[3],
-+				      stop->error);
-+	}
-+	spin_unlock_irq(&host->mmc->lock);
-+	mutex_unlock(&inode->i_mutex);
-+
-+	priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
-+	file->private_data = priv;
-+
-+	return 0;
-+}
-+
-+static ssize_t req_dbg_read(struct file *file, char __user *buf,
-+			    size_t nbytes, loff_t *ppos)
-+{
-+	struct req_dbg_data *priv = file->private_data;
-+
-+	return simple_read_from_buffer(buf, nbytes, ppos,
-+				       priv->str, priv->nbytes);
-+}
-+
-+static int req_dbg_release(struct inode *inode, struct file *file)
-+{
-+	kfree(file->private_data);
-+	return 0;
-+}
-+
-+static const struct file_operations req_dbg_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= req_dbg_open,
-+	.llseek		= no_llseek,
-+	.read		= req_dbg_read,
-+	.release	= req_dbg_release,
-+};
-+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+	struct atmel_mci *host;
-+	unsigned int i;
-+	u32 *data;
-+	int ret = -ENOMEM;
-+
-+	mutex_lock(&inode->i_mutex);
-+	host = inode->i_private;
-+	data = kmalloc(inode->i_size, GFP_KERNEL);
-+	if (!data)
-+		goto out;
-+
-+	spin_lock_irq(&host->mmc->lock);
-+	for (i = 0; i < inode->i_size / 4; i++)
-+		data[i] = __raw_readl(host->regs + i * 4);
-+	spin_unlock_irq(&host->mmc->lock);
-+
-+	file->private_data = data;
-+	ret = 0;
-+
-+out:
-+	mutex_unlock(&inode->i_mutex);
-+
-+	return ret;
-+}
-+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+			     size_t nbytes, loff_t *ppos)
-+{
-+	struct inode *inode = file->f_dentry->d_inode;
-+	int ret;
-+
-+	mutex_lock(&inode->i_mutex);
-+	ret = simple_read_from_buffer(buf, nbytes, ppos,
-+				      file->private_data,
-+				      file->f_dentry->d_inode->i_size);
-+	mutex_unlock(&inode->i_mutex);
-+
-+	return ret;
-+}
-+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+	kfree(file->private_data);
-+	return 0;
-+}
-+
-+static const struct file_operations regs_dbg_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= regs_dbg_open,
-+	.llseek		= generic_file_llseek,
-+	.read		= regs_dbg_read,
-+	.release	= regs_dbg_release,
-+};
-+
-+static void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+	struct mmc_host *mmc;
-+	struct dentry *root, *regs;
-+	struct resource *res;
-+
-+	mmc = host->mmc;
-+	root = debugfs_create_dir(mmc_hostname(mmc), NULL);
-+	if (IS_ERR(root) || !root)
-+		goto err_root;
-+	host->debugfs_root = root;
-+
-+	regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
-+	if (!regs)
-+		goto err_regs;
-+
-+	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-+	regs->d_inode->i_size = res->end - res->start + 1;
-+	host->debugfs_regs = regs;
-+
-+	host->debugfs_req = debugfs_create_file("req", 0400, root,
-+						host, &req_dbg_fops);
-+	if (!host->debugfs_req)
-+		goto err_req;
-+
-+	host->debugfs_pending_events
-+		= debugfs_create_u32("pending_events", 0400, root,
-+				     (u32 *)&host->pending_events);
-+	if (!host->debugfs_pending_events)
-+		goto err_pending_events;
-+
-+	host->debugfs_completed_events
-+		= debugfs_create_u32("completed_events", 0400, root,
-+				     (u32 *)&host->completed_events);
-+	if (!host->debugfs_completed_events)
-+		goto err_completed_events;
-+
-+	return;
-+
-+err_completed_events:
-+	debugfs_remove(host->debugfs_pending_events);
-+err_pending_events:
-+	debugfs_remove(host->debugfs_req);
-+err_req:
-+	debugfs_remove(host->debugfs_regs);
-+err_regs:
-+	debugfs_remove(host->debugfs_root);
-+err_root:
-+	host->debugfs_root = NULL;
-+	dev_err(&host->pdev->dev,
-+		"failed to initialize debugfs for %s\n",
-+		mmc_hostname(mmc));
-+}
-+
-+static void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+	if (host->debugfs_root) {
-+		debugfs_remove(host->debugfs_completed_events);
-+		debugfs_remove(host->debugfs_pending_events);
-+		debugfs_remove(host->debugfs_req);
-+		debugfs_remove(host->debugfs_regs);
-+		debugfs_remove(host->debugfs_root);
-+		host->debugfs_root = NULL;
-+	}
-+}
-+#else
-+static inline void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+
-+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+#endif /* CONFIG_DEBUG_FS */
-+
-+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
-+					unsigned int ns)
-+{
-+	return (ns * (host->bus_hz / 1000000) + 999) / 1000;
-+}
-+
-+static void atmci_set_timeout(struct atmel_mci *host,
-+			      struct mmc_data *data)
-+{
-+	static unsigned dtomul_to_shift[] = {
-+		0, 4, 7, 8, 10, 12, 16, 20
-+	};
-+	unsigned timeout;
-+	unsigned dtocyc, dtomul;
-+
-+	timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
-+
-+	for (dtomul = 0; dtomul < 8; dtomul++) {
-+		unsigned shift = dtomul_to_shift[dtomul];
-+		dtocyc = (timeout + (1 << shift) - 1) >> shift;
-+		if (dtocyc < 15)
-+			break;
-+	}
-+
-+	if (dtomul >= 8) {
-+		dtomul = 7;
-+		dtocyc = 15;
-+	}
-+
-+	pr_debug("%s: setting timeout to %u cycles\n",
-+		 mmc_hostname(host->mmc),
-+		 dtocyc << dtomul_to_shift[dtomul]);
-+	mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
-+				| MCI_BF(DTOCYC, dtocyc)));
-+}
-+
-+/*
-+ * Return mask with interrupt flags to be handled for this command.
-+ */
-+static u32 atmci_prepare_command(struct mmc_host *mmc,
-+				 struct mmc_command *cmd,
-+				 u32 *cmd_flags)
-+{
-+	u32 cmdr;
-+	u32 iflags;
-+
-+	cmd->error = MMC_ERR_NONE;
-+
-+	cmdr = 0;
-+	BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0);
-+	cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr);
-+
-+	if (cmd->flags & MMC_RSP_PRESENT) {
-+		if (cmd->flags & MMC_RSP_136)
-+			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
-+		else
-+			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
-+	}
-+
-+	/*
-+	 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
-+	 * it's too difficult to determine whether this is an ACMD or
-+	 * not. Better make it 64.
-+	 */
-+	cmdr |= MCI_BIT(MAXLAT);
-+
-+	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
-+		cmdr |= MCI_BIT(OPDCMD);
-+
-+	iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS;
-+	if (!(cmd->flags & MMC_RSP_CRC))
-+		iflags &= ~MCI_BIT(RCRCE);
-+
-+	pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
-+		 mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
-+		 (unsigned long)cmdr);
-+
-+	*cmd_flags = cmdr;
-+	return iflags;
-+}
-+
-+static void atmci_start_command(struct atmel_mci *host,
-+				struct mmc_command *cmd,
-+				u32 cmd_flags)
-+{
-+	WARN_ON(host->cmd);
-+	host->cmd = cmd;
-+
-+	mci_writel(host, ARGR, cmd->arg);
-+	mci_writel(host, CMDR, cmd_flags);
-+
-+	if (cmd->data)
-+		dma_start_request(host->dma.req.req.dmac,
-+				  host->dma.req.req.channel);
-+}
-+
-+/*
-+ * Returns a mask of flags to be set in the command register when the
-+ * command to start the transfer is to be sent.
-+ */
-+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	u32 cmd_flags;
-+
-+	WARN_ON(host->data);
-+	host->data = data;
-+
-+	atmci_set_timeout(host, data);
-+	mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
-+				| MCI_BF(BLKLEN, data->blksz)));
-+	host->dma.req.block_size = data->blksz;
-+	host->dma.req.nr_blocks = data->blocks;
-+
-+	cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
-+	if (data->flags & MMC_DATA_STREAM)
-+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+	else if (data->blocks > 1)
-+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+	else
-+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
-+
-+	if (data->flags & MMC_DATA_READ) {
-+		cmd_flags |= MCI_BIT(TRDIR);
-+		host->dma.req.nr_sg
-+			= dma_map_sg(&host->pdev->dev, data->sg,
-+				     data->sg_len, DMA_FROM_DEVICE);
-+		host->dma.req.periph_id = host->dma.rx_periph_id;
-+		host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
-+		host->dma.req.data_reg = host->mapbase + MCI_RDR;
-+	} else {
-+		host->dma.req.nr_sg
-+			= dma_map_sg(&host->pdev->dev, data->sg,
-+				     data->sg_len, DMA_TO_DEVICE);
-+		host->dma.req.periph_id = host->dma.tx_periph_id;
-+		host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
-+		host->dma.req.data_reg = host->mapbase + MCI_TDR;
-+	}
-+	host->dma.req.sg = data->sg;
-+
-+	dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
-+
-+	return cmd_flags;
-+}
-+
-+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	struct mmc_data *data = mrq->data;
-+	u32 iflags;
-+	u32 cmdflags = 0;
-+
-+	iflags = mci_readl(host, IMR);
-+	if (iflags)
-+		printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
-+
-+	WARN_ON(host->mrq != NULL);
-+	host->mrq = mrq;
-+	host->pending_events = 0;
-+	host->completed_events = 0;
-+
-+	iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags);
-+
-+	if (mrq->stop) {
-+		BUG_ON(!data);
-+
-+		host->stop_iflags = atmci_prepare_command(mmc, mrq->stop,
-+							  &host->stop_cmdr);
-+		host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
-+		if (!(data->flags & MMC_DATA_WRITE))
-+			host->stop_cmdr |= MCI_BIT(TRDIR);
-+		if (data->flags & MMC_DATA_STREAM)
-+			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+		else
-+			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+	}
-+	if (data) {
-+		cmdflags |= atmci_prepare_data(mmc, data);
-+		iflags |= MCI_DATA_ERROR_FLAGS;
-+	}
-+
-+	atmci_start_command(host, mrq->cmd, cmdflags);
-+	mci_writel(host, IER, iflags);
-+}
-+
-+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	if (ios->clock) {
-+		u32 clkdiv;
-+
-+		clkdiv = host->bus_hz / (2 * ios->clock) - 1;
-+		if (clkdiv > 255)
-+			clkdiv = 255;
-+		mci_writel(host, MR, (clkdiv
-+				      | MCI_BIT(WRPROOF)
-+				      | MCI_BIT(RDPROOF)));
-+	}
-+
-+	switch (ios->bus_width) {
-+	case MMC_BUS_WIDTH_1:
-+		mci_writel(host, SDCR, 0);
-+		break;
-+	case MMC_BUS_WIDTH_4:
-+		mci_writel(host, SDCR, MCI_BIT(SDCBUS));
-+		break;
-+	}
-+
-+	switch (ios->power_mode) {
-+	case MMC_POWER_OFF:
-+		mci_writel(host, CR, MCI_BIT(MCIDIS));
-+		break;
-+	case MMC_POWER_UP:
-+		mci_writel(host, CR, MCI_BIT(SWRST));
-+		break;
-+	case MMC_POWER_ON:
-+		mci_writel(host, CR, MCI_BIT(MCIEN));
-+		break;
-+	}
-+}
-+
-+static int atmci_get_ro(struct mmc_host *mmc)
-+{
-+	int read_only = 0;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	if (host->wp_pin >= 0) {
-+		read_only = gpio_get_value(host->wp_pin);
-+		pr_debug("%s: card is %s\n", mmc_hostname(mmc),
-+			 read_only ? "read-only" : "read-write");
-+	} else {
-+		pr_debug("%s: no pin for checking read-only switch."
-+			 " Assuming write-enable.\n", mmc_hostname(mmc));
-+	}
-+
-+	return read_only;
-+}
-+
-+static struct mmc_host_ops atmci_ops = {
-+	.request	= atmci_request,
-+	.set_ios	= atmci_set_ios,
-+	.get_ro		= atmci_get_ro,
-+};
-+
-+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	WARN_ON(host->cmd || host->data);
-+	host->mrq = NULL;
-+
-+	mmc_request_done(mmc, mrq);
-+}
-+
-+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
-+			  u32 flags)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	atmci_start_command(host, data->stop, host->stop_cmdr | flags);
-+	mci_writel(host, IER, host->stop_iflags);
-+}
-+
-+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
-+{
-+	host->data = NULL;
-+	dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
-+		     ((data->flags & MMC_DATA_WRITE)
-+		      ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
-+
-+	/*
-+	 * Data might complete before command for very short transfers
-+	 * (like READ_SCR)
-+	 */
-+	if (mci_cmd_is_complete(host)
-+	    && (!data->stop || mci_stop_is_complete(host)))
-+		atmci_request_end(host->mmc, data->mrq);
-+}
-+
-+static void atmci_command_error(struct mmc_host *mmc,
-+				struct mmc_command *cmd,
-+				u32 status)
-+{
-+	pr_debug("%s: command error: status=0x%08x\n",
-+		 mmc_hostname(mmc), status);
-+
-+	if (status & MCI_BIT(RTOE))
-+		cmd->error = MMC_ERR_TIMEOUT;
-+	else if (status & MCI_BIT(RCRCE))
-+		cmd->error = MMC_ERR_BADCRC;
-+	else
-+		cmd->error = MMC_ERR_FAILED;
-+}
-+
-+static void atmci_tasklet_func(unsigned long priv)
-+{
-+	struct mmc_host *mmc = (struct mmc_host *)priv;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	struct mmc_request *mrq = host->mrq;
-+	struct mmc_data *data = host->data;
-+
-+	pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
-+		 host->pending_events, host->completed_events,
-+		 mci_readl(host, IMR));
-+
-+	if (mci_clear_cmd_error_is_pending(host)) {
-+		struct mmc_command *cmd;
-+
-+		mci_set_cmd_error_complete(host);
-+		mci_clear_cmd_pending(host);
-+		cmd = host->mrq->cmd;
-+
-+		if (cmd->data) {
-+			dma_stop_request(host->dma.req.req.dmac,
-+					 host->dma.req.req.channel);
-+			host->data = NULL;
-+		}
-+
-+		atmci_command_error(mmc, cmd, host->error_status);
-+		atmci_request_end(mmc, cmd->mrq);
-+	}
-+	if (mci_clear_stop_error_is_pending(host)) {
-+		mci_set_stop_error_complete(host);
-+		mci_clear_stop_pending(host);
-+		atmci_command_error(mmc, host->mrq->stop,
-+				    host->error_status);
-+		if (!host->data)
-+			atmci_request_end(mmc, host->mrq);
-+	}
-+	if (mci_clear_cmd_is_pending(host)) {
-+		mci_set_cmd_complete(host);
-+		if (!mrq->data || mci_data_is_complete(host)
-+		    || mci_data_error_is_complete(host))
-+			atmci_request_end(mmc, mrq);
-+	}
-+	if (mci_clear_stop_is_pending(host)) {
-+		mci_set_stop_complete(host);
-+		if (mci_data_is_complete(host)
-+		    || mci_data_error_is_complete(host))
-+			atmci_request_end(mmc, mrq);
-+	}
-+	if (mci_clear_dma_error_is_pending(host)) {
-+		mci_set_dma_error_complete(host);
-+		mci_clear_data_pending(host);
-+
-+		/* DMA controller got bus error => invalid address */
-+		data->error = MMC_ERR_INVALID;
-+
-+		printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
-+		       mmc_hostname(mmc), host->data->bytes_xfered);
-+
-+		if (data->stop
-+		    && !mci_set_stop_sent_is_completed(host))
-+			/* TODO: Check if card is still present */
-+			send_stop_cmd(host->mmc, data, 0);
-+
-+		atmci_data_complete(host, data);
-+	}
-+	if (mci_clear_data_error_is_pending(host)) {
-+		u32 status = host->error_status;
-+
-+		mci_set_data_error_complete(host);
-+		mci_clear_data_pending(host);
-+
-+		dma_stop_request(host->dma.req.req.dmac,
-+				 host->dma.req.req.channel);
-+
-+		printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
-+		       mmc_hostname(host->mmc), status);
-+
-+		if (status & MCI_BIT(DCRCE)) {
-+			printk(KERN_DEBUG "%s: Data CRC error\n",
-+			       mmc_hostname(host->mmc));
-+			data->error = MMC_ERR_BADCRC;
-+		} else if (status & MCI_BIT(DTOE)) {
-+			printk(KERN_DEBUG "%s: Data Timeout error\n",
-+			       mmc_hostname(host->mmc));
-+			data->error = MMC_ERR_TIMEOUT;
-+		} else {
-+			printk(KERN_DEBUG "%s: Data FIFO error\n",
-+			       mmc_hostname(host->mmc));
-+			data->error = MMC_ERR_FIFO;
-+		}
-+		printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
-+		       mmc_hostname(host->mmc), data->bytes_xfered);
-+
-+		if (data->stop
-+		    && !mci_set_stop_sent_is_completed(host))
-+			/* TODO: Check if card is still present */
-+			send_stop_cmd(host->mmc, data, 0);
-+
-+		atmci_data_complete(host, data);
-+	}
-+	if (mci_clear_data_is_pending(host)) {
-+		mci_set_data_complete(host);
-+		data->bytes_xfered = data->blocks * data->blksz;
-+		atmci_data_complete(host, data);
-+	}
-+	if (mci_clear_card_detect_is_pending(host)) {
-+		/* Reset controller if card is gone */
-+		if (!host->present) {
-+			mci_writel(host, CR, MCI_BIT(SWRST));
-+			mci_writel(host, IDR, ~0UL);
-+			mci_writel(host, CR, MCI_BIT(MCIEN));
-+		}
-+
-+		/* Clean up queue if present */
-+		if (mrq) {
-+			if (!mci_cmd_is_complete(host)
-+			    && !mci_cmd_error_is_complete(host)) {
-+				mrq->cmd->error = MMC_ERR_TIMEOUT;
-+			}
-+			if (mrq->data && !mci_data_is_complete(host)
-+			    && !mci_data_error_is_complete(host)) {
-+				dma_stop_request(host->dma.req.req.dmac,
-+						host->dma.req.req.channel);
-+				host->data->error = MMC_ERR_TIMEOUT;
-+				atmci_data_complete(host, data);
-+			}
-+			if (mrq->stop && !mci_stop_is_complete(host)
-+			    && !mci_stop_error_is_complete(host)) {
-+				mrq->stop->error = MMC_ERR_TIMEOUT;
-+			}
-+
-+			host->cmd = NULL;
-+			atmci_request_end(mmc, mrq);
-+		}
-+		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-+	}
-+}
-+
-+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-+{
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	struct mmc_command *cmd = host->cmd;
-+
-+	/*
-+	 * Read the response now so that we're free to send a new
-+	 * command immediately.
-+	 */
-+	cmd->resp[0] = mci_readl(host, RSPR);
-+	cmd->resp[1] = mci_readl(host, RSPR);
-+	cmd->resp[2] = mci_readl(host, RSPR);
-+	cmd->resp[3] = mci_readl(host, RSPR);
-+
-+	mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS);
-+	host->cmd = NULL;
-+
-+	if (mci_stop_sent_is_complete(host))
-+		mci_set_stop_pending(host);
-+	else
-+		mci_set_cmd_pending(host);
-+
-+	tasklet_schedule(&host->tasklet);
-+}
-+
-+static void atmci_xfer_complete(struct dma_request *_req)
-+{
-+	struct dma_request_sg *req = to_dma_request_sg(_req);
-+	struct atmel_mci_dma *dma;
-+	struct atmel_mci *host;
-+	struct mmc_data *data;
-+
-+	dma = container_of(req, struct atmel_mci_dma, req);
-+	host = container_of(dma, struct atmel_mci, dma);
-+	data = host->data;
-+
-+	if (data->stop && !mci_set_stop_sent_is_completed(host))
-+		send_stop_cmd(host->mmc, data, 0);
-+
-+	if (data->flags & MMC_DATA_READ) {
-+		mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS);
-+		mci_set_data_pending(host);
-+		tasklet_schedule(&host->tasklet);
-+	} else {
-+		/*
-+		 * For the WRITE case, wait for NOTBUSY. This function
-+		 * is called when everything has been written to the
-+		 * controller, not when the card is done programming.
-+		 */
-+		mci_writel(host, IER, MCI_BIT(NOTBUSY));
-+	}
-+}
-+
-+static void atmci_dma_error(struct dma_request *_req)
-+{
-+	struct dma_request_sg *req = to_dma_request_sg(_req);
-+	struct atmel_mci_dma *dma;
-+	struct atmel_mci *host;
-+
-+	dma = container_of(req, struct atmel_mci_dma, req);
-+	host = container_of(dma, struct atmel_mci, dma);
-+
-+	mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+			       | MCI_DATA_ERROR_FLAGS));
-+
-+	mci_set_dma_error_pending(host);
-+	tasklet_schedule(&host->tasklet);
-+}
-+
-+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
-+{
-+	struct mmc_host *mmc = dev_id;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+	u32 status, mask, pending;
-+
-+	spin_lock(&mmc->lock);
-+
-+	status = mci_readl(host, SR);
-+	mask = mci_readl(host, IMR);
-+	pending = status & mask;
-+
-+	do {
-+		if (pending & MCI_CMD_ERROR_FLAGS) {
-+			mci_writel(host, IDR, (MCI_BIT(CMDRDY)
-+					       | MCI_BIT(NOTBUSY)
-+					       | MCI_CMD_ERROR_FLAGS
-+					       | MCI_DATA_ERROR_FLAGS));
-+			host->error_status = status;
-+			host->cmd = NULL;
-+			if (mci_stop_sent_is_complete(host))
-+				mci_set_stop_error_pending(host);
-+			else
-+				mci_set_cmd_error_pending(host);
-+			tasklet_schedule(&host->tasklet);
-+			break;
-+		}
-+		if (pending & MCI_DATA_ERROR_FLAGS) {
-+			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+					       | MCI_DATA_ERROR_FLAGS));
-+			host->error_status = status;
-+			mci_set_data_error_pending(host);
-+			tasklet_schedule(&host->tasklet);
-+			break;
-+		}
-+		if (pending & MCI_BIT(CMDRDY))
-+			atmci_cmd_interrupt(mmc, status);
-+		if (pending & MCI_BIT(NOTBUSY)) {
-+			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+					       | MCI_DATA_ERROR_FLAGS));
-+			mci_set_data_pending(host);
-+			tasklet_schedule(&host->tasklet);
-+		}
-+
-+		status = mci_readl(host, SR);
-+		mask = mci_readl(host, IMR);
-+		pending = status & mask;
-+	} while (pending);
-+
-+	spin_unlock(&mmc->lock);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t atmci_detect_change(int irq, void *dev_id)
-+{
-+	struct mmc_host *mmc = dev_id;
-+	struct atmel_mci *host = mmc_priv(mmc);
-+
-+	int present = !gpio_get_value(irq_to_gpio(irq));
-+
-+	if (present != host->present) {
-+		pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
-+			 present ? "inserted" : "removed");
-+		host->present = present;
-+		mci_set_card_detect_pending(host);
-+		tasklet_schedule(&host->tasklet);
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+static int __devinit atmci_probe(struct platform_device *pdev)
-+{
-+	struct mci_platform_data *board;
-+	struct atmel_mci *host;
-+	struct mmc_host *mmc;
-+	struct resource *regs;
-+	int irq;
-+	int ret;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return irq;
-+
-+	board = pdev->dev.platform_data;
-+
-+	mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
-+	if (!mmc)
-+		return -ENOMEM;
-+
-+	host = mmc_priv(mmc);
-+	host->pdev = pdev;
-+	host->mmc = mmc;
-+	if (board) {
-+		host->detect_pin = board->detect_pin;
-+		host->wp_pin = board->wp_pin;
-+	} else {
-+		host->detect_pin = -1;
-+		host->detect_pin = -1;
-+	}
-+
-+	host->mck = clk_get(&pdev->dev, "mci_clk");
-+	if (IS_ERR(host->mck)) {
-+		ret = PTR_ERR(host->mck);
-+		goto out_free_host;
-+	}
-+	clk_enable(host->mck);
-+
-+	ret = -ENOMEM;
-+	host->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!host->regs)
-+		goto out_disable_clk;
-+
-+	host->bus_hz = clk_get_rate(host->mck);
-+	host->mapbase = regs->start;
-+
-+	mmc->ops = &atmci_ops;
-+	mmc->f_min = (host->bus_hz + 511) / 512;
-+	mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
-+	mmc->ocr_avail	= 0x00100000;
-+	mmc->caps |= MMC_CAP_4_BIT_DATA;
-+
-+	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
-+
-+	ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
-+	if (ret)
-+		goto out_unmap;
-+
-+	/* Assume card is present if we don't have a detect pin */
-+	host->present = 1;
-+	if (host->detect_pin >= 0) {
-+		if (gpio_request(host->detect_pin, "mmc_detect")) {
-+			printk(KERN_WARNING "%s: no detect pin available\n",
-+			       mmc_hostname(host->mmc));
-+			host->detect_pin = -1;
-+		} else {
-+			host->present = !gpio_get_value(host->detect_pin);
-+		}
-+	}
-+	if (host->wp_pin >= 0) {
-+		if (gpio_request(host->wp_pin, "mmc_wp")) {
-+			printk(KERN_WARNING "%s: no WP pin available\n",
-+			       mmc_hostname(host->mmc));
-+			host->wp_pin = -1;
-+		}
-+	}
-+
-+	/* TODO: Get this information from platform data */
-+	ret = -ENOMEM;
-+	host->dma.req.req.dmac = find_dma_controller(0);
-+	if (!host->dma.req.req.dmac) {
-+		printk(KERN_ERR
-+		       "mmci: No DMA controller available, aborting\n");
-+		goto out_free_irq;
-+	}
-+	ret = dma_alloc_channel(host->dma.req.req.dmac);
-+	if (ret < 0) {
-+		printk(KERN_ERR
-+		       "mmci: Unable to allocate DMA channel, aborting\n");
-+		goto out_free_irq;
-+	}
-+	host->dma.req.req.channel = ret;
-+	host->dma.req.width = DMA_WIDTH_32BIT;
-+	host->dma.req.req.xfer_complete = atmci_xfer_complete;
-+	host->dma.req.req.block_complete = NULL; // atmci_block_complete;
-+	host->dma.req.req.error = atmci_dma_error;
-+	host->dma.rx_periph_id = 0;
-+	host->dma.tx_periph_id = 1;
-+
-+	mci_writel(host, CR, MCI_BIT(SWRST));
-+	mci_writel(host, IDR, ~0UL);
-+	mci_writel(host, CR, MCI_BIT(MCIEN));
-+
-+	platform_set_drvdata(pdev, host);
-+
-+	mmc_add_host(mmc);
-+
-+	if (host->detect_pin >= 0) {
-+		ret = request_irq(gpio_to_irq(host->detect_pin),
-+				  atmci_detect_change,
-+				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+				  DRIVER_NAME, mmc);
-+		if (ret) {
-+			printk(KERN_ERR
-+			       "%s: could not request IRQ %d for detect pin\n",
-+			       mmc_hostname(mmc),
-+			       gpio_to_irq(host->detect_pin));
-+			gpio_free(host->detect_pin);
-+			host->detect_pin = -1;
-+		}
-+	}
-+
-+	printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
-+	       mmc_hostname(mmc), host->mapbase, irq);
-+
-+	atmci_init_debugfs(host);
-+
-+	return 0;
-+
-+out_free_irq:
-+	if (host->detect_pin >= 0)
-+		gpio_free(host->detect_pin);
-+	if (host->wp_pin >= 0)
-+		gpio_free(host->wp_pin);
-+	free_irq(irq, mmc);
-+out_unmap:
-+	iounmap(host->regs);
-+out_disable_clk:
-+	clk_disable(host->mck);
-+	clk_put(host->mck);
-+out_free_host:
-+	mmc_free_host(mmc);
-+	return ret;
-+}
-+
-+static int __devexit atmci_remove(struct platform_device *pdev)
-+{
-+	struct atmel_mci *host = platform_get_drvdata(pdev);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	if (host) {
-+		atmci_cleanup_debugfs(host);
-+
-+		if (host->detect_pin >= 0) {
-+			free_irq(gpio_to_irq(host->detect_pin), host->mmc);
-+			cancel_delayed_work(&host->mmc->detect);
-+			gpio_free(host->detect_pin);
-+		}
-+
-+		mmc_remove_host(host->mmc);
-+
-+		mci_writel(host, IDR, ~0UL);
-+		mci_writel(host, CR, MCI_BIT(MCIDIS));
-+		mci_readl(host, SR);
-+
-+		dma_release_channel(host->dma.req.req.dmac,
-+				    host->dma.req.req.channel);
-+
-+		if (host->wp_pin >= 0)
-+			gpio_free(host->wp_pin);
-+
-+		free_irq(platform_get_irq(pdev, 0), host->mmc);
-+		iounmap(host->regs);
-+
-+		clk_disable(host->mck);
-+		clk_put(host->mck);
-+
-+		mmc_free_host(host->mmc);
-+	}
-+	return 0;
-+}
-+
-+static struct platform_driver atmci_driver = {
-+	.probe		= atmci_probe,
-+	.remove		= __devexit_p(atmci_remove),
-+	.driver		= {
-+		.name		= DRIVER_NAME,
-+	},
-+};
-+
-+static int __init atmci_init(void)
-+{
-+	return platform_driver_register(&atmci_driver);
-+}
-+
-+static void __exit atmci_exit(void)
-+{
-+	platform_driver_unregister(&atmci_driver);
-+}
-+
-+module_init(atmci_init);
-+module_exit(atmci_exit);
-+
-+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/mmc/host/atmel-mci.h b/drivers/mmc/host/atmel-mci.h
-new file mode 100644
-index 0000000..60d15c4
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.h
-@@ -0,0 +1,192 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
-+#define __DRIVERS_MMC_ATMEL_MCI_H__
-+
-+/* MCI register offsets */
-+#define MCI_CR					0x0000
-+#define MCI_MR					0x0004
-+#define MCI_DTOR				0x0008
-+#define MCI_SDCR				0x000c
-+#define MCI_ARGR				0x0010
-+#define MCI_CMDR				0x0014
-+#define MCI_BLKR				0x0018
-+#define MCI_RSPR				0x0020
-+#define MCI_RSPR1				0x0024
-+#define MCI_RSPR2				0x0028
-+#define MCI_RSPR3				0x002c
-+#define MCI_RDR					0x0030
-+#define MCI_TDR					0x0034
-+#define MCI_SR					0x0040
-+#define MCI_IER					0x0044
-+#define MCI_IDR					0x0048
-+#define MCI_IMR					0x004c
-+
-+/* Bitfields in CR */
-+#define MCI_MCIEN_OFFSET			0
-+#define MCI_MCIEN_SIZE				1
-+#define MCI_MCIDIS_OFFSET			1
-+#define MCI_MCIDIS_SIZE				1
-+#define MCI_PWSEN_OFFSET			2
-+#define MCI_PWSEN_SIZE				1
-+#define MCI_PWSDIS_OFFSET			3
-+#define MCI_PWSDIS_SIZE				1
-+#define MCI_SWRST_OFFSET			7
-+#define MCI_SWRST_SIZE				1
-+
-+/* Bitfields in MR */
-+#define MCI_CLKDIV_OFFSET			0
-+#define MCI_CLKDIV_SIZE				8
-+#define MCI_PWSDIV_OFFSET			8
-+#define MCI_PWSDIV_SIZE				3
-+#define MCI_RDPROOF_OFFSET			11
-+#define MCI_RDPROOF_SIZE			1
-+#define MCI_WRPROOF_OFFSET			12
-+#define MCI_WRPROOF_SIZE			1
-+#define MCI_DMAPADV_OFFSET			14
-+#define MCI_DMAPADV_SIZE			1
-+#define MCI_BLKLEN_OFFSET			16
-+#define MCI_BLKLEN_SIZE				16
-+
-+/* Bitfields in DTOR */
-+#define MCI_DTOCYC_OFFSET			0
-+#define MCI_DTOCYC_SIZE				4
-+#define MCI_DTOMUL_OFFSET			4
-+#define MCI_DTOMUL_SIZE				3
-+
-+/* Bitfields in SDCR */
-+#define MCI_SDCSEL_OFFSET			0
-+#define MCI_SDCSEL_SIZE				4
-+#define MCI_SDCBUS_OFFSET			7
-+#define MCI_SDCBUS_SIZE				1
-+
-+/* Bitfields in ARGR */
-+#define MCI_ARG_OFFSET				0
-+#define MCI_ARG_SIZE				32
-+
-+/* Bitfields in CMDR */
-+#define MCI_CMDNB_OFFSET			0
-+#define MCI_CMDNB_SIZE				6
-+#define MCI_RSPTYP_OFFSET			6
-+#define MCI_RSPTYP_SIZE				2
-+#define MCI_SPCMD_OFFSET			8
-+#define MCI_SPCMD_SIZE				3
-+#define MCI_OPDCMD_OFFSET			11
-+#define MCI_OPDCMD_SIZE				1
-+#define MCI_MAXLAT_OFFSET			12
-+#define MCI_MAXLAT_SIZE				1
-+#define MCI_TRCMD_OFFSET			16
-+#define MCI_TRCMD_SIZE				2
-+#define MCI_TRDIR_OFFSET			18
-+#define MCI_TRDIR_SIZE				1
-+#define MCI_TRTYP_OFFSET			19
-+#define MCI_TRTYP_SIZE				2
-+
-+/* Bitfields in BLKR */
-+#define MCI_BCNT_OFFSET				0
-+#define MCI_BCNT_SIZE				16
-+
-+/* Bitfields in RSPRn */
-+#define MCI_RSP_OFFSET				0
-+#define MCI_RSP_SIZE				32
-+
-+/* Bitfields in SR/IER/IDR/IMR */
-+#define MCI_CMDRDY_OFFSET			0
-+#define MCI_CMDRDY_SIZE				1
-+#define MCI_RXRDY_OFFSET			1
-+#define MCI_RXRDY_SIZE				1
-+#define MCI_TXRDY_OFFSET			2
-+#define MCI_TXRDY_SIZE				1
-+#define MCI_BLKE_OFFSET				3
-+#define MCI_BLKE_SIZE				1
-+#define MCI_DTIP_OFFSET				4
-+#define MCI_DTIP_SIZE				1
-+#define MCI_NOTBUSY_OFFSET			5
-+#define MCI_NOTBUSY_SIZE			1
-+#define MCI_ENDRX_OFFSET			6
-+#define MCI_ENDRX_SIZE				1
-+#define MCI_ENDTX_OFFSET			7
-+#define MCI_ENDTX_SIZE				1
-+#define MCI_RXBUFF_OFFSET			14
-+#define MCI_RXBUFF_SIZE				1
-+#define MCI_TXBUFE_OFFSET			15
-+#define MCI_TXBUFE_SIZE				1
-+#define MCI_RINDE_OFFSET			16
-+#define MCI_RINDE_SIZE				1
-+#define MCI_RDIRE_OFFSET			17
-+#define MCI_RDIRE_SIZE				1
-+#define MCI_RCRCE_OFFSET			18
-+#define MCI_RCRCE_SIZE				1
-+#define MCI_RENDE_OFFSET			19
-+#define MCI_RENDE_SIZE				1
-+#define MCI_RTOE_OFFSET				20
-+#define MCI_RTOE_SIZE				1
-+#define MCI_DCRCE_OFFSET			21
-+#define MCI_DCRCE_SIZE				1
-+#define MCI_DTOE_OFFSET				22
-+#define MCI_DTOE_SIZE				1
-+#define MCI_OVRE_OFFSET				30
-+#define MCI_OVRE_SIZE				1
-+#define MCI_UNRE_OFFSET				31
-+#define MCI_UNRE_SIZE				1
-+
-+/* Constants for DTOMUL */
-+#define MCI_DTOMUL_1_CYCLE			0
-+#define MCI_DTOMUL_16_CYCLES			1
-+#define MCI_DTOMUL_128_CYCLES			2
-+#define MCI_DTOMUL_256_CYCLES			3
-+#define MCI_DTOMUL_1024_CYCLES			4
-+#define MCI_DTOMUL_4096_CYCLES			5
-+#define MCI_DTOMUL_65536_CYCLES			6
-+#define MCI_DTOMUL_1048576_CYCLES		7
-+
-+/* Constants for RSPTYP */
-+#define MCI_RSPTYP_NO_RESP			0
-+#define MCI_RSPTYP_48_BIT			1
-+#define MCI_RSPTYP_136_BIT			2
-+
-+/* Constants for SPCMD */
-+#define MCI_SPCMD_NO_SPEC_CMD			0
-+#define MCI_SPCMD_INIT_CMD			1
-+#define MCI_SPCMD_SYNC_CMD			2
-+#define MCI_SPCMD_INT_CMD			4
-+#define MCI_SPCMD_INT_RESP			5
-+
-+/* Constants for TRCMD */
-+#define MCI_TRCMD_NO_TRANS			0
-+#define MCI_TRCMD_START_TRANS			1
-+#define MCI_TRCMD_STOP_TRANS			2
-+
-+/* Constants for TRTYP */
-+#define MCI_TRTYP_BLOCK				0
-+#define MCI_TRTYP_MULTI_BLOCK			1
-+#define MCI_TRTYP_STREAM			2
-+
-+/* Bit manipulation macros */
-+#define MCI_BIT(name)					\
-+	(1 << MCI_##name##_OFFSET)
-+#define MCI_BF(name,value)				\
-+	(((value) & ((1 << MCI_##name##_SIZE) - 1))	\
-+	 << MCI_##name##_OFFSET)
-+#define MCI_BFEXT(name,value)				\
-+	(((value) >> MCI_##name##_OFFSET)		\
-+	 & ((1 << MCI_##name##_SIZE) - 1))
-+#define MCI_BFINS(name,value,old)			\
-+	(((old) & ~(((1 << MCI_##name##_SIZE) - 1)	\
-+		    << MCI_##name##_OFFSET))		\
-+	 | MCI_BF(name,value))
-+
-+/* Register access macros */
-+#define mci_readl(port,reg)				\
-+	__raw_readl((port)->regs + MCI_##reg)
-+#define mci_writel(port,reg,value)			\
-+	__raw_writel((value), (port)->regs + MCI_##reg)
-+
-+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
-diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
-index 2f19fa7..94304ca 100644
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -50,6 +50,7 @@
- #define I82802AC	0x00ac
- #define MANUFACTURER_ST         0x0020
- #define M50LPW080       0x002F
-+#define AT49BV640D	0x02de
- 
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -156,6 +157,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
- }
- #endif
- 
-+/* Atmel chips don't use the same PRI format as Intel chips */
-+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-+	struct cfi_pri_atmel atmel_pri;
-+	uint32_t features = 0;
-+
-+	/* Reverse byteswapping */
-+	extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
-+	extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
-+	extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
-+
-+	memcpy(&atmel_pri, extp, sizeof(atmel_pri));
-+	memset((char *)extp + 5, 0, sizeof(*extp) - 5);
-+
-+	printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
-+
-+	if (atmel_pri.Features & 0x01) /* chip erase supported */
-+		features |= (1<<0);
-+	if (atmel_pri.Features & 0x02) /* erase suspend supported */
-+		features |= (1<<1);
-+	if (atmel_pri.Features & 0x04) /* program suspend supported */
-+		features |= (1<<2);
-+	if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
-+		features |= (1<<9);
-+	if (atmel_pri.Features & 0x20) /* page mode read supported */
-+		features |= (1<<7);
-+	if (atmel_pri.Features & 0x40) /* queued erase supported */
-+		features |= (1<<4);
-+	if (atmel_pri.Features & 0x80) /* Protection bits supported */
-+		features |= (1<<6);
-+
-+	extp->FeatureSupport = features;
-+
-+	/* burst write mode not supported */
-+	cfi->cfiq->BufWriteTimeoutTyp = 0;
-+	cfi->cfiq->BufWriteTimeoutMax = 0;
-+}
-+
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
- static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -233,6 +275,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
- }
- 
- static struct cfi_fixup cfi_fixup_table[] = {
-+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
- #endif
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 1f64458..205977b 100644
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
- 		extp->TopBottom = 2;
- 	else
- 		extp->TopBottom = 3;
-+
-+	/* burst write mode not supported */
-+	cfi->cfiq->BufWriteTimeoutTyp = 0;
-+	cfi->cfiq->BufWriteTimeoutMax = 0;
- }
- 
- static void fixup_use_secsi(struct mtd_info *mtd, void *param)
-@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
- }
- 
- static struct cfi_fixup cfi_fixup_table[] = {
-+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
- 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
- #endif
-@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
- #if !FORCE_WORD_WRITE
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
--	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- 	{ 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
-index b49375a..b9cb56a 100644
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -191,7 +191,7 @@ config MII
- config MACB
- 	tristate "Atmel MACB support"
- 	depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
--	select MII
-+	select PHYLIB
- 	help
- 	  The Atmel MACB ethernet interface is found on many AT32 and AT91
- 	  parts. Say Y to include support for the MACB chip.
-diff --git a/drivers/net/macb.c b/drivers/net/macb.c
-index 0e04f7a..c20a585 100644
---- a/drivers/net/macb.c
-+++ b/drivers/net/macb.c
-@@ -17,13 +17,14 @@
- #include <linux/init.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
--#include <linux/mii.h>
--#include <linux/mutex.h>
- #include <linux/dma-mapping.h>
--#include <linux/ethtool.h>
- #include <linux/platform_device.h>
-+#include <linux/phy.h>
- 
- #include <asm/arch/board.h>
-+#if defined(CONFIG_ARCH_AT91)
-+#include <asm/arch/cpu.h>
-+#endif
- 
- #include "macb.h"
- 
-@@ -85,172 +86,202 @@ static void __init macb_get_hwaddr(struct macb *bp)
- 		memcpy(bp->dev->dev_addr, addr, sizeof(addr));
- }
- 
--static void macb_enable_mdio(struct macb *bp)
-+static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
- {
--	unsigned long flags;
--	u32 reg;
--
--	spin_lock_irqsave(&bp->lock, flags);
--	reg = macb_readl(bp, NCR);
--	reg |= MACB_BIT(MPE);
--	macb_writel(bp, NCR, reg);
--	macb_writel(bp, IER, MACB_BIT(MFD));
--	spin_unlock_irqrestore(&bp->lock, flags);
--}
--
--static void macb_disable_mdio(struct macb *bp)
--{
--	unsigned long flags;
--	u32 reg;
--
--	spin_lock_irqsave(&bp->lock, flags);
--	reg = macb_readl(bp, NCR);
--	reg &= ~MACB_BIT(MPE);
--	macb_writel(bp, NCR, reg);
--	macb_writel(bp, IDR, MACB_BIT(MFD));
--	spin_unlock_irqrestore(&bp->lock, flags);
--}
--
--static int macb_mdio_read(struct net_device *dev, int phy_id, int location)
--{
--	struct macb *bp = netdev_priv(dev);
-+	struct macb *bp = bus->priv;
- 	int value;
- 
--	mutex_lock(&bp->mdio_mutex);
--
--	macb_enable_mdio(bp);
- 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
- 			      | MACB_BF(RW, MACB_MAN_READ)
--			      | MACB_BF(PHYA, phy_id)
--			      | MACB_BF(REGA, location)
-+			      | MACB_BF(PHYA, mii_id)
-+			      | MACB_BF(REGA, regnum)
- 			      | MACB_BF(CODE, MACB_MAN_CODE)));
- 
--	wait_for_completion(&bp->mdio_complete);
-+	/* wait for end of transfer */
-+	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
-+		cpu_relax();
- 
- 	value = MACB_BFEXT(DATA, macb_readl(bp, MAN));
--	macb_disable_mdio(bp);
--	mutex_unlock(&bp->mdio_mutex);
- 
- 	return value;
- }
- 
--static void macb_mdio_write(struct net_device *dev, int phy_id,
--			    int location, int val)
-+static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+			   u16 value)
- {
--	struct macb *bp = netdev_priv(dev);
--
--	dev_dbg(&bp->pdev->dev, "mdio_write %02x:%02x <- %04x\n",
--		phy_id, location, val);
--
--	mutex_lock(&bp->mdio_mutex);
--	macb_enable_mdio(bp);
-+	struct macb *bp = bus->priv;
- 
- 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
- 			      | MACB_BF(RW, MACB_MAN_WRITE)
--			      | MACB_BF(PHYA, phy_id)
--			      | MACB_BF(REGA, location)
-+			      | MACB_BF(PHYA, mii_id)
-+			      | MACB_BF(REGA, regnum)
- 			      | MACB_BF(CODE, MACB_MAN_CODE)
--			      | MACB_BF(DATA, val)));
-+			      | MACB_BF(DATA, value)));
- 
--	wait_for_completion(&bp->mdio_complete);
-+	/* wait for end of transfer */
-+	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
-+		cpu_relax();
- 
--	macb_disable_mdio(bp);
--	mutex_unlock(&bp->mdio_mutex);
-+	return 0;
- }
- 
--static int macb_phy_probe(struct macb *bp)
-+static int macb_mdio_reset(struct mii_bus *bus)
- {
--	int phy_address;
--	u16 phyid1, phyid2;
-+	return 0;
-+}
- 
--	for (phy_address = 0; phy_address < 32; phy_address++) {
--		phyid1 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID1);
--		phyid2 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID2);
-+static void macb_handle_link_change(struct net_device *dev)
-+{
-+	struct macb *bp = netdev_priv(dev);
-+	struct phy_device *phydev = bp->phy_dev;
-+	unsigned long flags;
- 
--		if (phyid1 != 0xffff && phyid1 != 0x0000
--		    && phyid2 != 0xffff && phyid2 != 0x0000)
--			break;
-+	int status_change = 0;
-+
-+	spin_lock_irqsave(&bp->lock, flags);
-+
-+	if (phydev->link) {
-+		if ((bp->speed != phydev->speed) ||
-+		    (bp->duplex != phydev->duplex)) {
-+			u32 reg;
-+
-+			reg = macb_readl(bp, NCFGR);
-+			reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
-+
-+			if (phydev->duplex)
-+				reg |= MACB_BIT(FD);
-+			if (phydev->speed)
-+				reg |= MACB_BIT(SPD);
-+
-+			macb_writel(bp, NCFGR, reg);
-+
-+			bp->speed = phydev->speed;
-+			bp->duplex = phydev->duplex;
-+			status_change = 1;
-+		}
- 	}
- 
--	if (phy_address == 32)
--		return -ENODEV;
-+	if (phydev->link != bp->link) {
-+		if (phydev->link)
-+			netif_schedule(dev);
-+		else {
-+			bp->speed = 0;
-+			bp->duplex = -1;
-+		}
-+		bp->link = phydev->link;
- 
--	dev_info(&bp->pdev->dev,
--		 "detected PHY at address %d (ID %04x:%04x)\n",
--		 phy_address, phyid1, phyid2);
-+		status_change = 1;
-+	}
- 
--	bp->mii.phy_id = phy_address;
--	return 0;
-+	spin_unlock_irqrestore(&bp->lock, flags);
-+
-+	if (status_change) {
-+		if (phydev->link)
-+			printk(KERN_INFO "%s: link up (%d/%s)\n",
-+			       dev->name, phydev->speed,
-+			       DUPLEX_FULL == phydev->duplex ? "Full":"Half");
-+		else
-+			printk(KERN_INFO "%s: link down\n", dev->name);
-+	}
- }
- 
--static void macb_set_media(struct macb *bp, int media)
-+/* based on au1000_eth. c*/
-+static int macb_mii_probe(struct net_device *dev)
- {
--	u32 reg;
-+	struct macb *bp = netdev_priv(dev);
-+	struct phy_device *phydev = NULL;
-+	struct eth_platform_data *pdata;
-+	int phy_addr;
- 
--	spin_lock_irq(&bp->lock);
--	reg = macb_readl(bp, NCFGR);
--	reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
--	if (media & (ADVERTISE_100HALF | ADVERTISE_100FULL))
--		reg |= MACB_BIT(SPD);
--	if (media & ADVERTISE_FULL)
--		reg |= MACB_BIT(FD);
--	macb_writel(bp, NCFGR, reg);
--	spin_unlock_irq(&bp->lock);
-+	/* find the first phy */
-+	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-+		if (bp->mii_bus.phy_map[phy_addr]) {
-+			phydev = bp->mii_bus.phy_map[phy_addr];
-+			break;
-+		}
-+	}
-+
-+	if (!phydev) {
-+		printk (KERN_ERR "%s: no PHY found\n", dev->name);
-+		return -1;
-+	}
-+
-+	pdata = bp->pdev->dev.platform_data;
-+	/* TODO : add pin_irq */
-+
-+	/* attach the mac to the phy */
-+	if (pdata && pdata->is_rmii) {
-+		phydev = phy_connect(dev, phydev->dev.bus_id,
-+			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_RMII);
-+	} else {
-+		phydev = phy_connect(dev, phydev->dev.bus_id,
-+			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_MII);
-+	}
-+
-+	if (IS_ERR(phydev)) {
-+		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+		return PTR_ERR(phydev);
-+	}
-+
-+	/* mask with MAC supported features */
-+	phydev->supported &= PHY_BASIC_FEATURES;
-+
-+	phydev->advertising = phydev->supported;
-+
-+	bp->link = 0;
-+	bp->speed = 0;
-+	bp->duplex = -1;
-+	bp->phy_dev = phydev;
-+
-+	return 0;
- }
- 
--static void macb_check_media(struct macb *bp, int ok_to_print, int init_media)
-+static int macb_mii_init(struct macb *bp)
- {
--	struct mii_if_info *mii = &bp->mii;
--	unsigned int old_carrier, new_carrier;
--	int advertise, lpa, media, duplex;
-+	struct eth_platform_data *pdata;
-+	int err = -ENXIO, i;
- 
--	/* if forced media, go no further */
--	if (mii->force_media)
--		return;
-+	/* Enable managment port */
-+	macb_writel(bp, NCR, MACB_BIT(MPE));
- 
--	/* check current and old link status */
--	old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
--	new_carrier = (unsigned int) mii_link_ok(mii);
-+	bp->mii_bus.name = "MACB_mii_bus",
-+	bp->mii_bus.read = &macb_mdio_read,
-+	bp->mii_bus.write = &macb_mdio_write,
-+	bp->mii_bus.reset = &macb_mdio_reset,
-+	bp->mii_bus.id = bp->pdev->id,
-+	bp->mii_bus.priv = bp,
-+	bp->mii_bus.dev = &bp->dev->dev;
-+	pdata = bp->pdev->dev.platform_data;
- 
--	/* if carrier state did not change, assume nothing else did */
--	if (!init_media && old_carrier == new_carrier)
--		return;
-+	if (pdata)
-+		bp->mii_bus.phy_mask = pdata->phy_mask;
- 
--	/* no carrier, nothing much to do */
--	if (!new_carrier) {
--		netif_carrier_off(mii->dev);
--		printk(KERN_INFO "%s: link down\n", mii->dev->name);
--		return;
-+	bp->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-+	if (!bp->mii_bus.irq) {
-+		err = -ENOMEM;
-+		goto err_out;
- 	}
- 
--	/*
--	 * we have carrier, see who's on the other end
--	 */
--	netif_carrier_on(mii->dev);
-+	for (i = 0; i < PHY_MAX_ADDR; i++)
-+		bp->mii_bus.irq[i] = PHY_POLL;
- 
--	/* get MII advertise and LPA values */
--	if (!init_media && mii->advertising) {
--		advertise = mii->advertising;
--	} else {
--		advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
--		mii->advertising = advertise;
--	}
--	lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
-+	platform_set_drvdata(bp->dev, &bp->mii_bus);
- 
--	/* figure out media and duplex from advertise and LPA values */
--	media = mii_nway_result(lpa & advertise);
--	duplex = (media & ADVERTISE_FULL) ? 1 : 0;
-+	if (mdiobus_register(&bp->mii_bus))
-+		goto err_out_free_mdio_irq;
- 
--	if (ok_to_print)
--		printk(KERN_INFO "%s: link up, %sMbps, %s-duplex, lpa 0x%04X\n",
--		       mii->dev->name,
--		       media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? "100" : "10",
--		       duplex ? "full" : "half", lpa);
-+	if (macb_mii_probe(bp->dev) != 0) {
-+		goto err_out_unregister_bus;
-+	}
- 
--	mii->full_duplex = duplex;
-+	return 0;
- 
--	/* Let the MAC know about the new link state */
--	macb_set_media(bp, media);
-+err_out_unregister_bus:
-+	mdiobus_unregister(&bp->mii_bus);
-+err_out_free_mdio_irq:
-+	kfree(bp->mii_bus.irq);
-+err_out:
-+	return err;
- }
- 
- static void macb_update_stats(struct macb *bp)
-@@ -265,16 +296,6 @@ static void macb_update_stats(struct macb *bp)
- 		*p += __raw_readl(reg);
- }
- 
--static void macb_periodic_task(struct work_struct *work)
--{
--	struct macb *bp = container_of(work, struct macb, periodic_task.work);
--
--	macb_update_stats(bp);
--	macb_check_media(bp, 1, 0);
--
--	schedule_delayed_work(&bp->periodic_task, HZ);
--}
--
- static void macb_tx(struct macb *bp)
- {
- 	unsigned int tail;
-@@ -519,9 +540,6 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
- 	spin_lock(&bp->lock);
- 
- 	while (status) {
--		if (status & MACB_BIT(MFD))
--			complete(&bp->mdio_complete);
--
- 		/* close possible race with dev_close */
- 		if (unlikely(!netif_running(dev))) {
- 			macb_writel(bp, IDR, ~0UL);
-@@ -535,7 +553,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
- 				 * until we have processed the buffers
- 				 */
- 				macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
--				dev_dbg(&bp->pdev->dev, "scheduling RX softirq\n");
-+				dev_dbg(&bp->pdev->dev,
-+					"scheduling RX softirq\n");
- 				__netif_rx_schedule(dev);
- 			}
- 		}
-@@ -765,7 +784,7 @@ static void macb_init_hw(struct macb *bp)
- 	macb_writel(bp, TBQP, bp->tx_ring_dma);
- 
- 	/* Enable TX and RX */
--	macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE));
-+	macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE) | MACB_BIT(MPE));
- 
- 	/* Enable interrupts */
- 	macb_writel(bp, IER, (MACB_BIT(RCOMP)
-@@ -776,18 +795,126 @@ static void macb_init_hw(struct macb *bp)
- 			      | MACB_BIT(TCOMP)
- 			      | MACB_BIT(ISR_ROVR)
- 			      | MACB_BIT(HRESP)));
-+
- }
- 
--static void macb_init_phy(struct net_device *dev)
-+/*
-+ * The hash address register is 64 bits long and takes up two
-+ * locations in the memory map.  The least significant bits are stored
-+ * in EMAC_HSL and the most significant bits in EMAC_HSH.
-+ *
-+ * The unicast hash enable and the multicast hash enable bits in the
-+ * network configuration register enable the reception of hash matched
-+ * frames. The destination address is reduced to a 6 bit index into
-+ * the 64 bit hash register using the following hash function.  The
-+ * hash function is an exclusive or of every sixth bit of the
-+ * destination address.
-+ *
-+ * hi[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
-+ * hi[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
-+ * hi[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
-+ * hi[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
-+ * hi[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
-+ * hi[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
-+ *
-+ * da[0] represents the least significant bit of the first byte
-+ * received, that is, the multicast/unicast indicator, and da[47]
-+ * represents the most significant bit of the last byte received.  If
-+ * the hash index, hi[n], points to a bit that is set in the hash
-+ * register then the frame will be matched according to whether the
-+ * frame is multicast or unicast.  A multicast match will be signalled
-+ * if the multicast hash enable bit is set, da[0] is 1 and the hash
-+ * index points to a bit set in the hash register.  A unicast match
-+ * will be signalled if the unicast hash enable bit is set, da[0] is 0
-+ * and the hash index points to a bit set in the hash register.  To
-+ * receive all multicast frames, the hash register should be set with
-+ * all ones and the multicast hash enable bit should be set in the
-+ * network configuration register.
-+ */
-+
-+static inline int hash_bit_value(int bitnr, __u8 *addr)
- {
-+	if (addr[bitnr / 8] & (1 << (bitnr % 8)))
-+		return 1;
-+	return 0;
-+}
-+
-+/*
-+ * Return the hash index value for the specified address.
-+ */
-+static int hash_get_index(__u8 *addr)
-+{
-+	int i, j, bitval;
-+	int hash_index = 0;
-+
-+	for (j = 0; j < 6; j++) {
-+		for (i = 0, bitval = 0; i < 8; i++)
-+			bitval ^= hash_bit_value(i*6 + j, addr);
-+
-+		hash_index |= (bitval << j);
-+	}
-+
-+	return hash_index;
-+}
-+
-+/*
-+ * Add multicast addresses to the internal multicast-hash table.
-+ */
-+static void macb_sethashtable(struct net_device *dev)
-+{
-+	struct dev_mc_list *curr;
-+	unsigned long mc_filter[2];
-+	unsigned int i, bitnr;
-+	struct macb *bp = netdev_priv(dev);
-+
-+	mc_filter[0] = mc_filter[1] = 0;
-+
-+	curr = dev->mc_list;
-+	for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
-+		if (!curr) break;	/* unexpected end of list */
-+
-+		bitnr = hash_get_index(curr->dmi_addr);
-+		mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
-+	}
-+
-+	macb_writel(bp, HRB, mc_filter[0]);
-+	macb_writel(bp, HRT, mc_filter[1]);
-+}
-+
-+/*
-+ * Enable/Disable promiscuous and multicast modes.
-+ */
-+static void macb_set_rx_mode(struct net_device *dev)
-+{
-+	unsigned long cfg;
- 	struct macb *bp = netdev_priv(dev);
- 
--	/* Set some reasonable default settings */
--	macb_mdio_write(dev, bp->mii.phy_id, MII_ADVERTISE,
--			ADVERTISE_CSMA | ADVERTISE_ALL);
--	macb_mdio_write(dev, bp->mii.phy_id, MII_BMCR,
--			(BMCR_SPEED100 | BMCR_ANENABLE
--			 | BMCR_ANRESTART | BMCR_FULLDPLX));
-+	cfg = macb_readl(bp, NCFGR);
-+
-+	if (dev->flags & IFF_PROMISC)
-+		/* Enable promiscuous mode */
-+		cfg |= MACB_BIT(CAF);
-+	else if (dev->flags & (~IFF_PROMISC))
-+		 /* Disable promiscuous mode */
-+		cfg &= ~MACB_BIT(CAF);
-+
-+	if (dev->flags & IFF_ALLMULTI) {
-+		/* Enable all multicast mode */
-+		macb_writel(bp, HRB, -1);
-+		macb_writel(bp, HRT, -1);
-+		cfg |= MACB_BIT(NCFGR_MTI);
-+	} else if (dev->mc_count > 0) {
-+		/* Enable specific multicasts */
-+		macb_sethashtable(dev);
-+		cfg |= MACB_BIT(NCFGR_MTI);
-+	} else if (dev->flags & (~IFF_ALLMULTI)) {
-+		/* Disable all multicast mode */
-+		macb_writel(bp, HRB, 0);
-+		macb_writel(bp, HRT, 0);
-+		cfg &= ~MACB_BIT(NCFGR_MTI);
-+	}
-+
-+	macb_writel(bp, NCFGR, cfg);
- }
- 
- static int macb_open(struct net_device *dev)
-@@ -797,6 +924,10 @@ static int macb_open(struct net_device *dev)
- 
- 	dev_dbg(&bp->pdev->dev, "open\n");
- 
-+	/* if the phy is not yet register, retry later*/
-+	if (!bp->phy_dev)
-+		return -EAGAIN;
-+
- 	if (!is_valid_ether_addr(dev->dev_addr))
- 		return -EADDRNOTAVAIL;
- 
-@@ -810,12 +941,11 @@ static int macb_open(struct net_device *dev)
- 
- 	macb_init_rings(bp);
- 	macb_init_hw(bp);
--	macb_init_phy(dev);
- 
--	macb_check_media(bp, 1, 1);
--	netif_start_queue(dev);
-+	/* schedule a link state check */
-+	phy_start(bp->phy_dev);
- 
--	schedule_delayed_work(&bp->periodic_task, HZ);
-+	netif_start_queue(dev);
- 
- 	return 0;
- }
-@@ -825,10 +955,11 @@ static int macb_close(struct net_device *dev)
- 	struct macb *bp = netdev_priv(dev);
- 	unsigned long flags;
- 
--	cancel_rearming_delayed_work(&bp->periodic_task);
--
- 	netif_stop_queue(dev);
- 
-+	if (bp->phy_dev)
-+		phy_stop(bp->phy_dev);
-+
- 	spin_lock_irqsave(&bp->lock, flags);
- 	macb_reset_hw(bp);
- 	netif_carrier_off(dev);
-@@ -845,6 +976,9 @@ static struct net_device_stats *macb_get_stats(struct net_device *dev)
- 	struct net_device_stats *nstat = &bp->stats;
- 	struct macb_stats *hwstat = &bp->hw_stats;
- 
-+	/* read stats from hardware */
-+	macb_update_stats(bp);
-+
- 	/* Convert HW stats into netdevice stats */
- 	nstat->rx_errors = (hwstat->rx_fcs_errors +
- 			    hwstat->rx_align_errors +
-@@ -882,18 +1016,27 @@ static struct net_device_stats *macb_get_stats(struct net_device *dev)
- static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- 	struct macb *bp = netdev_priv(dev);
-+	struct phy_device *phydev = bp->phy_dev;
- 
--	return mii_ethtool_gset(&bp->mii, cmd);
-+	if (!phydev)
-+		return -ENODEV;
-+
-+	return phy_ethtool_gset(phydev, cmd);
- }
- 
- static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- 	struct macb *bp = netdev_priv(dev);
-+	struct phy_device *phydev = bp->phy_dev;
- 
--	return mii_ethtool_sset(&bp->mii, cmd);
-+	if (!phydev)
-+		return -ENODEV;
-+
-+	return phy_ethtool_sset(phydev, cmd);
- }
- 
--static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-+static void macb_get_drvinfo(struct net_device *dev,
-+			     struct ethtool_drvinfo *info)
- {
- 	struct macb *bp = netdev_priv(dev);
- 
-@@ -902,104 +1045,34 @@ static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *inf
- 	strcpy(info->bus_info, bp->pdev->dev.bus_id);
- }
- 
--static int macb_nway_reset(struct net_device *dev)
--{
--	struct macb *bp = netdev_priv(dev);
--	return mii_nway_restart(&bp->mii);
--}
--
- static struct ethtool_ops macb_ethtool_ops = {
- 	.get_settings		= macb_get_settings,
- 	.set_settings		= macb_set_settings,
- 	.get_drvinfo		= macb_get_drvinfo,
--	.nway_reset		= macb_nway_reset,
- 	.get_link		= ethtool_op_get_link,
- };
- 
- static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
- 	struct macb *bp = netdev_priv(dev);
-+	struct phy_device *phydev = bp->phy_dev;
- 
- 	if (!netif_running(dev))
- 		return -EINVAL;
- 
--	return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
--}
--
--static ssize_t macb_mii_show(const struct device *_dev, char *buf,
--			unsigned long addr)
--{
--	struct net_device *dev = to_net_dev(_dev);
--	struct macb *bp = netdev_priv(dev);
--	ssize_t ret = -EINVAL;
--
--	if (netif_running(dev)) {
--		int value;
--		value = macb_mdio_read(dev, bp->mii.phy_id, addr);
--		ret = sprintf(buf, "0x%04x\n", (uint16_t)value);
--	}
--
--	return ret;
--}
--
--#define MII_ENTRY(name, addr)					\
--static ssize_t show_##name(struct device *_dev,			\
--			   struct device_attribute *attr,	\
--			   char *buf)				\
--{								\
--	return macb_mii_show(_dev, buf, addr);			\
--}								\
--static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
--
--MII_ENTRY(bmcr, MII_BMCR);
--MII_ENTRY(bmsr, MII_BMSR);
--MII_ENTRY(physid1, MII_PHYSID1);
--MII_ENTRY(physid2, MII_PHYSID2);
--MII_ENTRY(advertise, MII_ADVERTISE);
--MII_ENTRY(lpa, MII_LPA);
--MII_ENTRY(expansion, MII_EXPANSION);
--
--static struct attribute *macb_mii_attrs[] = {
--	&dev_attr_bmcr.attr,
--	&dev_attr_bmsr.attr,
--	&dev_attr_physid1.attr,
--	&dev_attr_physid2.attr,
--	&dev_attr_advertise.attr,
--	&dev_attr_lpa.attr,
--	&dev_attr_expansion.attr,
--	NULL,
--};
--
--static struct attribute_group macb_mii_group = {
--	.name	= "mii",
--	.attrs	= macb_mii_attrs,
--};
--
--static void macb_unregister_sysfs(struct net_device *net)
--{
--	struct device *_dev = &net->dev;
-+	if (!phydev)
-+		return -ENODEV;
- 
--	sysfs_remove_group(&_dev->kobj, &macb_mii_group);
-+	return phy_mii_ioctl(phydev, if_mii(rq), cmd);
- }
- 
--static int macb_register_sysfs(struct net_device *net)
--{
--	struct device *_dev = &net->dev;
--	int ret;
--
--	ret = sysfs_create_group(&_dev->kobj, &macb_mii_group);
--	if (ret)
--		printk(KERN_WARNING
--		       "%s: sysfs mii attribute registration failed: %d\n",
--		       net->name, ret);
--	return ret;
--}
- static int __devinit macb_probe(struct platform_device *pdev)
- {
- 	struct eth_platform_data *pdata;
- 	struct resource *regs;
- 	struct net_device *dev;
- 	struct macb *bp;
-+	struct phy_device *phydev;
- 	unsigned long pclk_hz;
- 	u32 config;
- 	int err = -ENXIO;
-@@ -1073,6 +1146,7 @@ static int __devinit macb_probe(struct platform_device *pdev)
- 	dev->stop = macb_close;
- 	dev->hard_start_xmit = macb_start_xmit;
- 	dev->get_stats = macb_get_stats;
-+	dev->set_multicast_list = macb_set_rx_mode;
- 	dev->do_ioctl = macb_ioctl;
- 	dev->poll = macb_poll;
- 	dev->weight = 64;
-@@ -1080,10 +1154,6 @@ static int __devinit macb_probe(struct platform_device *pdev)
- 
- 	dev->base_addr = regs->start;
- 
--	INIT_DELAYED_WORK(&bp->periodic_task, macb_periodic_task);
--	mutex_init(&bp->mdio_mutex);
--	init_completion(&bp->mdio_complete);
--
- 	/* Set MII management clock divider */
- 	pclk_hz = clk_get_rate(bp->pclk);
- 	if (pclk_hz <= 20000000)
-@@ -1096,20 +1166,9 @@ static int __devinit macb_probe(struct platform_device *pdev)
- 		config = MACB_BF(CLK, MACB_CLK_DIV64);
- 	macb_writel(bp, NCFGR, config);
- 
--	bp->mii.dev = dev;
--	bp->mii.mdio_read = macb_mdio_read;
--	bp->mii.mdio_write = macb_mdio_write;
--	bp->mii.phy_id_mask = 0x1f;
--	bp->mii.reg_num_mask = 0x1f;
--
- 	macb_get_hwaddr(bp);
--	err = macb_phy_probe(bp);
--	if (err) {
--		dev_err(&pdev->dev, "Failed to detect PHY, aborting.\n");
--		goto err_out_free_irq;
--	}
--
- 	pdata = pdev->dev.platform_data;
-+
- 	if (pdata && pdata->is_rmii)
- #if defined(CONFIG_ARCH_AT91)
- 		macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
-@@ -1131,9 +1190,11 @@ static int __devinit macb_probe(struct platform_device *pdev)
- 		goto err_out_free_irq;
- 	}
- 
--	platform_set_drvdata(pdev, dev);
-+	if (macb_mii_init(bp) != 0) {
-+		goto err_out_unregister_netdev;
-+	}
- 
--	macb_register_sysfs(dev);
-+	platform_set_drvdata(pdev, dev);
- 
- 	printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d "
- 	       "(%02x:%02x:%02x:%02x:%02x:%02x)\n",
-@@ -1141,8 +1202,15 @@ static int __devinit macb_probe(struct platform_device *pdev)
- 	       dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- 	       dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
- 
-+	phydev = bp->phy_dev;
-+	printk(KERN_INFO "%s: attached PHY driver [%s] "
-+		"(mii_bus:phy_addr=%s, irq=%d)\n",
-+		dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
-+
- 	return 0;
- 
-+err_out_unregister_netdev:
-+	unregister_netdev(dev);
- err_out_free_irq:
- 	free_irq(dev->irq, dev);
- err_out_iounmap:
-@@ -1153,7 +1221,9 @@ err_out_disable_clocks:
- 	clk_put(bp->hclk);
- #endif
- 	clk_disable(bp->pclk);
-+#ifndef CONFIG_ARCH_AT91
- err_out_put_pclk:
-+#endif
- 	clk_put(bp->pclk);
- err_out_free_dev:
- 	free_netdev(dev);
-@@ -1171,7 +1241,8 @@ static int __devexit macb_remove(struct platform_device *pdev)
- 
- 	if (dev) {
- 		bp = netdev_priv(dev);
--		macb_unregister_sysfs(dev);
-+		mdiobus_unregister(&bp->mii_bus);
-+		kfree(bp->mii_bus.irq);
- 		unregister_netdev(dev);
- 		free_irq(dev->irq, dev);
- 		iounmap(bp->regs);
-diff --git a/drivers/net/macb.h b/drivers/net/macb.h
-index b3bb218..4e3283e 100644
---- a/drivers/net/macb.h
-+++ b/drivers/net/macb.h
-@@ -383,11 +383,11 @@ struct macb {
- 
- 	unsigned int		rx_pending, tx_pending;
- 
--	struct delayed_work	periodic_task;
--
--	struct mutex		mdio_mutex;
--	struct completion	mdio_complete;
--	struct mii_if_info	mii;
-+	struct mii_bus		mii_bus;
-+	struct phy_device	*phy_dev;
-+	unsigned int 		link;
-+	unsigned int 		speed;
-+	unsigned int 		duplex;
- };
- 
- #endif /* _MACB_H */
-diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
-index 4e4c10a..6d014fb 100644
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -379,6 +379,13 @@ config RTC_DRV_PL031
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called rtc-pl031.
- 
-+config RTC_DRV_AT32AP700X
-+	tristate "AT32AP700X series RTC"
-+	depends on RTC_CLASS && PLATFORM_AT32AP
-+	help
-+	  Driver for the internal RTC (Realtime Clock) on Atmel AVR32
-+	  AT32AP700x family processors.
-+
- config RTC_DRV_AT91RM9200
- 	tristate "AT91RM9200"
- 	depends on RTC_CLASS && ARCH_AT91RM9200
-diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
-index a1afbc2..5fb1c10 100644
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
- obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
- obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
- obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
-+obj-$(CONFIG_RTC_DRV_AT32AP700X)	+= rtc-at32ap700x.o
- obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
- obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
- obj-$(CONFIG_RTC_DRV_DS1742)	+= rtc-ds1742.o
-diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
-new file mode 100644
-index 0000000..2999214
---- /dev/null
-+++ b/drivers/rtc/rtc-at32ap700x.c
-@@ -0,0 +1,317 @@
-+/*
-+ * An RTC driver for the AVR32 AT32AP700x processor series.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/rtc.h>
-+#include <linux/io.h>
-+
-+/*
-+ * This is a bare-bones RTC. It runs during most system sleep states, but has
-+ * no battery backup and gets reset during system restart.  It must be
-+ * initialized from an external clock (network, I2C, etc) before it can be of
-+ * much use.
-+ *
-+ * The alarm functionality is limited by the hardware, not supporting
-+ * periodic interrupts.
-+ */
-+
-+#define RTC_CTRL		0x00
-+#define RTC_CTRL_EN		   0
-+#define RTC_CTRL_PCLR		   1
-+#define RTC_CTRL_TOPEN		   2
-+#define RTC_CTRL_PSEL		   8
-+
-+#define RTC_VAL			0x04
-+
-+#define RTC_TOP			0x08
-+
-+#define RTC_IER			0x10
-+#define RTC_IER_TOPI		   0
-+
-+#define RTC_IDR			0x14
-+#define RTC_IDR_TOPI		   0
-+
-+#define RTC_IMR			0x18
-+#define RTC_IMR_TOPI		   0
-+
-+#define RTC_ISR			0x1c
-+#define RTC_ISR_TOPI		   0
-+
-+#define RTC_ICR			0x20
-+#define RTC_ICR_TOPI		   0
-+
-+#define RTC_BIT(name)		(1 << RTC_##name)
-+#define RTC_BF(name, value)	((value) << RTC_##name)
-+
-+#define rtc_readl(dev, reg)				\
-+	__raw_readl((dev)->regs + RTC_##reg)
-+#define rtc_writel(dev, reg, value)			\
-+	__raw_writel((value), (dev)->regs + RTC_##reg)
-+
-+struct rtc_at32ap700x {
-+	struct rtc_device	*rtc;
-+	void __iomem		*regs;
-+	unsigned long		alarm_time;
-+	unsigned long		irq;
-+	/* Protect against concurrent register access. */
-+	spinlock_t		lock;
-+};
-+
-+static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm)
-+{
-+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+	unsigned long now;
-+
-+	now = rtc_readl(rtc, VAL);
-+	rtc_time_to_tm(now, tm);
-+
-+	return 0;
-+}
-+
-+static int at32_rtc_settime(struct device *dev, struct rtc_time *tm)
-+{
-+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+	unsigned long now;
-+	int ret;
-+
-+	ret = rtc_tm_to_time(tm, &now);
-+	if (ret == 0)
-+		rtc_writel(rtc, VAL, now);
-+
-+	return ret;
-+}
-+
-+static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+
-+	rtc_time_to_tm(rtc->alarm_time, &alrm->time);
-+	alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
-+
-+	return 0;
-+}
-+
-+static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+	unsigned long rtc_unix_time;
-+	unsigned long alarm_unix_time;
-+	int ret;
-+
-+	rtc_unix_time = rtc_readl(rtc, VAL);
-+
-+	ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time);
-+	if (ret)
-+		return ret;
-+
-+	if (alarm_unix_time < rtc_unix_time)
-+		return -EINVAL;
-+
-+	spin_lock_irq(&rtc->lock);
-+	rtc->alarm_time = alarm_unix_time;
-+	rtc_writel(rtc, TOP, rtc->alarm_time);
-+	if (alrm->pending)
-+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+				| RTC_BIT(CTRL_TOPEN));
-+	else
-+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+				& ~RTC_BIT(CTRL_TOPEN));
-+	spin_unlock_irq(&rtc->lock);
-+
-+	return ret;
-+}
-+
-+static int at32_rtc_ioctl(struct device *dev, unsigned int cmd,
-+			unsigned long arg)
-+{
-+	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+	int ret = 0;
-+
-+	spin_lock_irq(&rtc->lock);
-+
-+	switch (cmd) {
-+	case RTC_AIE_ON:
-+		if (rtc_readl(rtc, VAL) > rtc->alarm_time) {
-+			ret = -EINVAL;
-+			break;
-+		}
-+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+				| RTC_BIT(CTRL_TOPEN));
-+		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+		rtc_writel(rtc, IER, RTC_BIT(IER_TOPI));
-+		break;
-+	case RTC_AIE_OFF:
-+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+				& ~RTC_BIT(CTRL_TOPEN));
-+		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+		break;
-+	default:
-+		ret = -ENOIOCTLCMD;
-+		break;
-+	}
-+
-+	spin_unlock_irq(&rtc->lock);
-+
-+	return ret;
-+}
-+
-+static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id)
-+{
-+	struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id;
-+	unsigned long isr = rtc_readl(rtc, ISR);
-+	unsigned long events = 0;
-+	int ret = IRQ_NONE;
-+
-+	spin_lock(&rtc->lock);
-+
-+	if (isr & RTC_BIT(ISR_TOPI)) {
-+		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+				& ~RTC_BIT(CTRL_TOPEN));
-+		rtc_writel(rtc, VAL, rtc->alarm_time);
-+		events = RTC_AF | RTC_IRQF;
-+		rtc_update_irq(rtc->rtc, 1, events);
-+		ret = IRQ_HANDLED;
-+	}
-+
-+	spin_unlock(&rtc->lock);
-+
-+	return ret;
-+}
-+
-+static struct rtc_class_ops at32_rtc_ops = {
-+	.ioctl		= at32_rtc_ioctl,
-+	.read_time	= at32_rtc_readtime,
-+	.set_time	= at32_rtc_settime,
-+	.read_alarm	= at32_rtc_readalarm,
-+	.set_alarm	= at32_rtc_setalarm,
-+};
-+
-+static int __init at32_rtc_probe(struct platform_device *pdev)
-+{
-+	struct resource	*regs;
-+	struct rtc_at32ap700x *rtc;
-+	int irq = -1;
-+	int ret;
-+
-+	rtc = kzalloc(sizeof(struct rtc_at32ap700x), GFP_KERNEL);
-+	if (!rtc) {
-+		dev_dbg(&pdev->dev, "out of memory\n");
-+		return -ENOMEM;
-+	}
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_dbg(&pdev->dev, "no mmio resource defined\n");
-+		ret = -ENXIO;
-+		goto out;
-+	}
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0) {
-+		dev_dbg(&pdev->dev, "could not get irq\n");
-+		ret = -ENXIO;
-+		goto out;
-+	}
-+
-+	ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
-+		goto out;
-+	}
-+
-+	rtc->irq = irq;
-+	rtc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!rtc->regs) {
-+		ret = -ENOMEM;
-+		dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+		goto out_free_irq;
-+	}
-+	spin_lock_init(&rtc->lock);
-+
-+	/*
-+	 * Maybe init RTC: count from zero at 1 Hz, disable wrap irq.
-+	 *
-+	 * Do not reset VAL register, as it can hold an old time
-+	 * from last JTAG reset.
-+	 */
-+	if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) {
-+		rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR));
-+		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+		rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe)
-+				| RTC_BIT(CTRL_EN));
-+	}
-+
-+	rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
-+				&at32_rtc_ops, THIS_MODULE);
-+	if (IS_ERR(rtc->rtc)) {
-+		dev_dbg(&pdev->dev, "could not register rtc device\n");
-+		ret = PTR_ERR(rtc->rtc);
-+		goto out_iounmap;
-+	}
-+
-+	platform_set_drvdata(pdev, rtc);
-+
-+	dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
-+			(unsigned long)rtc->regs, rtc->irq);
-+
-+	return 0;
-+
-+out_iounmap:
-+	iounmap(rtc->regs);
-+out_free_irq:
-+	free_irq(irq, rtc);
-+out:
-+	kfree(rtc);
-+	return ret;
-+}
-+
-+static int __exit at32_rtc_remove(struct platform_device *pdev)
-+{
-+	struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
-+
-+	free_irq(rtc->irq, rtc);
-+	iounmap(rtc->regs);
-+	rtc_device_unregister(rtc->rtc);
-+	kfree(rtc);
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+
-+MODULE_ALIAS("at32ap700x_rtc");
-+
-+static struct platform_driver at32_rtc_driver = {
-+	.remove		= __exit_p(at32_rtc_remove),
-+	.driver		= {
-+		.name	= "at32ap700x_rtc",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init at32_rtc_init(void)
-+{
-+	return platform_driver_probe(&at32_rtc_driver, at32_rtc_probe);
-+}
-+module_init(at32_rtc_init);
-+
-+static void __exit at32_rtc_exit(void)
-+{
-+	platform_driver_unregister(&at32_rtc_driver);
-+}
-+module_exit(at32_rtc_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Real time clock for AVR32 AT32AP700x");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
-index 3320bcd..4d6b3c5 100644
---- a/drivers/serial/atmel_serial.c
-+++ b/drivers/serial/atmel_serial.c
-@@ -114,6 +114,7 @@ struct atmel_uart_port {
- 	struct uart_port	uart;		/* uart */
- 	struct clk		*clk;		/* uart clock */
- 	unsigned short		suspended;	/* is port suspended? */
-+	int			break_active;	/* break being received */
- };
- 
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-@@ -252,6 +253,7 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
-  */
- static void atmel_rx_chars(struct uart_port *port)
- {
-+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- 	struct tty_struct *tty = port->info->tty;
- 	unsigned int status, ch, flg;
- 
-@@ -267,13 +269,29 @@ static void atmel_rx_chars(struct uart_port *port)
- 		 * note that the error handling code is
- 		 * out of the main execution path
- 		 */
--		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
-+		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
-+				       | ATMEL_US_OVRE | ATMEL_US_RXBRK)
-+			     || atmel_port->break_active)) {
- 			UART_PUT_CR(port, ATMEL_US_RSTSTA);	/* clear error */
--			if (status & ATMEL_US_RXBRK) {
-+			if (status & ATMEL_US_RXBRK
-+			    && !atmel_port->break_active) {
- 				status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
- 				port->icount.brk++;
-+				atmel_port->break_active = 1;
-+				UART_PUT_IER(port, ATMEL_US_RXBRK);
- 				if (uart_handle_break(port))
- 					goto ignore_char;
-+			} else {
-+				/*
-+				 * This is either the end-of-break
-+				 * condition or we've received at
-+				 * least one character without RXBRK
-+				 * being set. In both cases, the next
-+				 * RXBRK will indicate start-of-break.
-+				 */
-+				UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+				status &= ~ATMEL_US_RXBRK;
-+				atmel_port->break_active = 0;
- 			}
- 			if (status & ATMEL_US_PARE)
- 				port->icount.parity++;
-@@ -352,6 +370,16 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
- 		/* Interrupt receive */
- 		if (pending & ATMEL_US_RXRDY)
- 			atmel_rx_chars(port);
-+		else if (pending & ATMEL_US_RXBRK) {
-+			/*
-+			 * End of break detected. If it came along
-+			 * with a character, atmel_rx_chars will
-+			 * handle it.
-+			 */
-+			UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+			UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+			atmel_port->break_active = 0;
-+		}
- 
- 		// TODO: All reads to CSR will clear these interrupts!
- 		if (pending & ATMEL_US_RIIC) port->icount.rng++;
-diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
-index 8b2601d..8f5453f 100644
---- a/drivers/spi/atmel_spi.c
-+++ b/drivers/spi/atmel_spi.c
-@@ -412,8 +412,8 @@ static int atmel_spi_setup(struct spi_device *spi)
- 		csr |= SPI_BIT(NCPHA);
- 
- 	/* TODO: DLYBS and DLYBCT */
--	csr |= SPI_BF(DLYBS, 10);
--	csr |= SPI_BF(DLYBCT, 10);
-+	csr |= SPI_BF(DLYBS, 0);
-+	csr |= SPI_BF(DLYBCT, 0);
- 
- 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
- 	npcs_pin = (unsigned int)spi->controller_data;
-diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
-index f771a7c..0c3d55b 100644
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -175,6 +175,19 @@ config USB_LH7A40X
- 	default USB_GADGET
- 	select USB_GADGET_SELECTED
- 
-+config USB_GADGET_ATMEL_USBA
-+	boolean "Atmel USBA"
-+	select USB_GADGET_DUALSPEED
-+	depends on AVR32
-+	help
-+	  USBA is the integrated high-speed USB Device controller on
-+	  the AT32AP700x processors from Atmel.
-+
-+config USB_ATMEL_USBA
-+	tristate
-+	depends on USB_GADGET_ATMEL_USBA
-+	default USB_GADGET
-+	select USB_GADGET_SELECTED
- 
- config USB_GADGET_OMAP
- 	boolean "OMAP USB Device Controller"
-diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
-index 5db1939..c28da01 100644
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
- obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
- obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
- obj-$(CONFIG_USB_AT91)		+= at91_udc.o
-+obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
- obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
- 
- #
-diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
-new file mode 100644
-index 0000000..34dbae3
---- /dev/null
-+++ b/drivers/usb/gadget/atmel_usba_udc.c
-@@ -0,0 +1,2072 @@
-+/*
-+ * Driver for the Atmel USBA high speed USB device controller
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+/* #define DEBUG */
-+
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/list.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ch9.h>
-+#include <linux/usb_gadget.h>
-+#include <linux/delay.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/arch/board.h>
-+
-+#include "atmel_usba_udc.h"
-+
-+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-+
-+#define FIFO_IOMEM_ID	0
-+#define CTRL_IOMEM_ID	1
-+
-+#ifdef DEBUG
-+#define DBG_ERR		0x0001	/* report all error returns */
-+#define DBG_HW		0x0002	/* debug hardware initialization */
-+#define DBG_GADGET	0x0004	/* calls to/from gadget driver */
-+#define DBG_INT		0x0008	/* interrupts */
-+#define DBG_BUS		0x0010	/* report changes in bus state */
-+#define DBG_QUEUE	0x0020  /* debug request queue processing */
-+#define DBG_FIFO	0x0040  /* debug FIFO contents */
-+#define DBG_DMA		0x0080  /* debug DMA handling */
-+#define DBG_REQ		0x0100	/* print out queued request length */
-+#define DBG_ALL		0xffff
-+#define DBG_NONE	0x0000
-+
-+#define DEBUG_LEVEL	(DBG_ERR)
-+#define DBG(level, fmt, ...)					\
-+	do {							\
-+		if ((level) & DEBUG_LEVEL)			\
-+			printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__);	\
-+	} while (0)
-+#else
-+#define DBG(level, fmt...)
-+#endif
-+
-+static struct usba_udc the_udc;
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+#include <linux/uaccess.h>
-+
-+static int queue_dbg_open(struct inode *inode, struct file *file)
-+{
-+	struct usba_ep *ep = inode->i_private;
-+	struct usba_request *req, *req_copy;
-+	struct list_head *queue_data;
-+
-+	queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
-+	if (!queue_data)
-+		return -ENOMEM;
-+	INIT_LIST_HEAD(queue_data);
-+
-+	spin_lock_irq(&ep->udc->lock);
-+	list_for_each_entry(req, &ep->queue, queue) {
-+		req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
-+		if (!req_copy)
-+			goto fail;
-+		memcpy(req_copy, req, sizeof(*req_copy));
-+		list_add_tail(&req_copy->queue, queue_data);
-+	}
-+	spin_unlock_irq(&ep->udc->lock);
-+
-+	file->private_data = queue_data;
-+	return 0;
-+
-+fail:
-+	spin_unlock_irq(&ep->udc->lock);
-+	list_for_each_entry_safe(req, req_copy, queue_data, queue) {
-+		list_del(&req->queue);
-+		kfree(req);
-+	}
-+	kfree(queue_data);
-+	return -ENOMEM;
-+}
-+
-+/*
-+ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
-+ *
-+ * b: buffer address
-+ * l: buffer length
-+ * I/i: interrupt/no interrupt
-+ * Z/z: zero/no zero
-+ * S/s: short ok/short not ok
-+ * s: status
-+ * n: nr_packets
-+ * F/f: submitted/not submitted to FIFO
-+ * D/d: using/not using DMA
-+ * L/l: last transaction/not last transaction
-+ */
-+static ssize_t queue_dbg_read(struct file *file, char __user *buf,
-+			      size_t nbytes, loff_t *ppos)
-+{
-+	struct list_head *queue = file->private_data;
-+	struct usba_request *req, *tmp_req;
-+	size_t len, remaining, actual = 0;
-+	char tmpbuf[38];
-+
-+	if (!access_ok(VERIFY_WRITE, buf, nbytes))
-+		return -EFAULT;
-+
-+	mutex_lock(&file->f_dentry->d_inode->i_mutex);
-+	list_for_each_entry_safe(req, tmp_req, queue, queue) {
-+		len = snprintf(tmpbuf, sizeof(tmpbuf),
-+			       "%8p %08x %c%c%c %5d %c%c%c\n",
-+			       req->req.buf, req->req.length,
-+			       req->req.no_interrupt ? 'i' : 'I',
-+			       req->req.zero ? 'Z' : 'z',
-+			       req->req.short_not_ok ? 's' : 'S',
-+			       req->req.status,
-+			       req->submitted ? 'F' : 'f',
-+			       req->using_dma ? 'D' : 'd',
-+			       req->last_transaction ? 'L' : 'l');
-+		len = min(len, sizeof(tmpbuf));
-+		if (len > nbytes)
-+			break;
-+
-+		list_del(&req->queue);
-+		kfree(req);
-+
-+		remaining = __copy_to_user(buf, tmpbuf, len);
-+		actual += len - remaining;
-+		if (remaining)
-+			break;
-+
-+		nbytes -= len;
-+		buf += len;
-+	}
-+	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-+
-+	return actual;
-+}
-+
-+static int queue_dbg_release(struct inode *inode, struct file *file)
-+{
-+	struct list_head *queue_data = file->private_data;
-+	struct usba_request *req, *tmp_req;
-+
-+	list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
-+		list_del(&req->queue);
-+		kfree(req);
-+	}
-+	kfree(queue_data);
-+	return 0;
-+}
-+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+	struct usba_udc *udc;
-+	unsigned int i;
-+	u32 *data;
-+	int ret = -ENOMEM;
-+
-+	mutex_lock(&inode->i_mutex);
-+	udc = inode->i_private;
-+	data = kmalloc(inode->i_size, GFP_KERNEL);
-+	if (!data)
-+		goto out;
-+
-+	spin_lock_irq(&udc->lock);
-+	for (i = 0; i < inode->i_size / 4; i++)
-+		data[i] = __raw_readl(udc->regs + i * 4);
-+	spin_unlock_irq(&udc->lock);
-+
-+	file->private_data = data;
-+	ret = 0;
-+
-+out:
-+	mutex_unlock(&inode->i_mutex);
-+
-+	return ret;
-+}
-+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+			     size_t nbytes, loff_t *ppos)
-+{
-+	struct inode *inode = file->f_dentry->d_inode;
-+	int ret;
-+
-+	mutex_lock(&inode->i_mutex);
-+	ret = simple_read_from_buffer(buf, nbytes, ppos,
-+				       file->private_data,
-+				       file->f_dentry->d_inode->i_size);
-+	mutex_unlock(&inode->i_mutex);
-+
-+	return ret;
-+}
-+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+	kfree(file->private_data);
-+	return 0;
-+}
-+
-+const struct file_operations queue_dbg_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= queue_dbg_open,
-+	.llseek		= no_llseek,
-+	.read		= queue_dbg_read,
-+	.release	= queue_dbg_release,
-+};
-+
-+const struct file_operations regs_dbg_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= regs_dbg_open,
-+	.llseek		= generic_file_llseek,
-+	.read		= regs_dbg_read,
-+	.release	= regs_dbg_release,
-+};
-+
-+static void usba_ep_init_debugfs(struct usba_udc *udc,
-+				  struct usba_ep *ep)
-+{
-+	struct dentry *ep_root;
-+
-+	ep_root = debugfs_create_dir(ep_name(ep), udc->debugfs_root);
-+	if (!ep_root)
-+		goto err_root;
-+	ep->debugfs_dir = ep_root;
-+
-+	ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
-+						ep, &queue_dbg_fops);
-+	if (!ep->debugfs_queue)
-+		goto err_queue;
-+
-+	if (ep_can_dma(ep)) {
-+		ep->debugfs_dma_status
-+			= debugfs_create_u32("dma_status", 0400, ep_root,
-+					     &ep->last_dma_status);
-+		if (!ep->debugfs_dma_status)
-+			goto err_dma_status;
-+	}
-+	if (ep_is_control(ep)) {
-+		ep->debugfs_state
-+			= debugfs_create_u32("state", 0400, ep_root,
-+					     &ep->state);
-+		if (!ep->debugfs_state)
-+			goto err_state;
-+	}
-+
-+	return;
-+
-+err_state:
-+	if (ep_can_dma(ep))
-+		debugfs_remove(ep->debugfs_dma_status);
-+err_dma_status:
-+	debugfs_remove(ep->debugfs_queue);
-+err_queue:
-+	debugfs_remove(ep_root);
-+err_root:
-+	dev_err(&ep->udc->pdev->dev,
-+		"failed to create debugfs directory for %s\n", ep_name(ep));
-+}
-+
-+static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
-+{
-+	debugfs_remove(ep->debugfs_queue);
-+	debugfs_remove(ep->debugfs_dma_status);
-+	debugfs_remove(ep->debugfs_state);
-+	debugfs_remove(ep->debugfs_dir);
-+	ep->debugfs_dma_status = NULL;
-+	ep->debugfs_dir = NULL;
-+}
-+
-+static void usba_init_debugfs(struct usba_udc *udc)
-+{
-+	struct dentry *root, *regs;
-+	struct resource *regs_resource;
-+
-+	root = debugfs_create_dir(udc->gadget.name, NULL);
-+	if (IS_ERR(root) || !root)
-+		goto err_root;
-+	udc->debugfs_root = root;
-+
-+	regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
-+	if (!regs)
-+		goto err_regs;
-+
-+	regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
-+					      CTRL_IOMEM_ID);
-+	regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
-+	udc->debugfs_regs = regs;
-+
-+	usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
-+
-+	return;
-+
-+err_regs:
-+	debugfs_remove(root);
-+err_root:
-+	udc->debugfs_root = NULL;
-+	dev_err(&udc->pdev->dev, "debugfs is not available\n");
-+}
-+
-+static void usba_cleanup_debugfs(struct usba_udc *udc)
-+{
-+	usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
-+	debugfs_remove(udc->debugfs_regs);
-+	debugfs_remove(udc->debugfs_root);
-+	udc->debugfs_regs = NULL;
-+	udc->debugfs_root = NULL;
-+}
-+#else
-+static inline void usba_ep_init_debugfs(struct usba_udc *udc,
-+					 struct usba_ep *ep)
-+{
-+
-+}
-+
-+static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
-+{
-+
-+}
-+
-+static inline void usba_init_debugfs(struct usba_udc *udc)
-+{
-+
-+}
-+
-+static inline void usba_cleanup_debugfs(struct usba_udc *udc)
-+{
-+
-+}
-+#endif
-+
-+static int vbus_is_present(struct usba_udc *udc)
-+{
-+	if (udc->vbus_pin != -1)
-+		return gpio_get_value(udc->vbus_pin);
-+
-+	/* No Vbus detection: Assume always present */
-+	return 1;
-+}
-+
-+static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
-+{
-+	unsigned long tmp;
-+
-+	DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
-+	for (; len > 0; len -= 4, buf += 4, fifo += 4) {
-+		tmp = *(unsigned long *)buf;
-+		if (len >= 4) {
-+			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
-+			__raw_writel(tmp, fifo);
-+		} else {
-+			do {
-+				DBG(DBG_FIFO, "  -> %02lx\n", tmp >> 24);
-+				__raw_writeb(tmp >> 24, fifo);
-+				fifo++;
-+				tmp <<= 8;
-+			} while (--len);
-+			break;
-+		}
-+	}
-+}
-+
-+static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
-+{
-+	union {
-+		unsigned long *w;
-+		unsigned char *b;
-+	} p;
-+	unsigned long tmp;
-+
-+	DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
-+	for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
-+		if (len >= 4) {
-+			tmp = __raw_readl(fifo);
-+			*p.w = tmp;
-+			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
-+		} else {
-+			do {
-+				tmp = __raw_readb(fifo);
-+				*p.b = tmp;
-+				DBG(DBG_FIFO, " -> %02lx\n", tmp);
-+				fifo++, p.b++;
-+			} while (--len);
-+		}
-+	}
-+}
-+
-+static void next_fifo_transaction(struct usba_ep *ep,
-+				  struct usba_request *req)
-+{
-+	unsigned int transaction_len;
-+
-+	transaction_len = req->req.length - req->req.actual;
-+	req->last_transaction = 1;
-+	if (transaction_len > ep->ep.maxpacket) {
-+		transaction_len = ep->ep.maxpacket;
-+		req->last_transaction = 0;
-+	} else if (transaction_len == ep->ep.maxpacket
-+		   && req->req.zero) {
-+		req->last_transaction = 0;
-+	}
-+	DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
-+	    ep_name(ep), req, transaction_len,
-+	    req->last_transaction ? ", done" : "");
-+
-+	copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
-+	usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
-+	req->req.actual += transaction_len;
-+}
-+
-+static void submit_request(struct usba_ep *ep, struct usba_request *req)
-+{
-+	DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
-+	    ep_name(ep), req, req->req.length);
-+
-+	req->req.actual = 0;
-+	req->submitted = 1;
-+
-+	if (req->using_dma) {
-+		if (req->req.length == 0) {
-+			usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
-+			return;
-+		}
-+
-+		if (req->req.zero)
-+			usba_ep_writel(ep, CTL_ENB, USBA_BIT(SHORT_PACKET));
-+		else
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(SHORT_PACKET));
-+
-+		usba_dma_writel(ep, ADDRESS, req->req.dma);
-+		usba_dma_writel(ep, CONTROL, req->ctrl);
-+	} else {
-+		next_fifo_transaction(ep, req);
-+		if (req->last_transaction) {
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
-+			usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
-+		} else {
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
-+			usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
-+		}
-+	}
-+}
-+
-+static void submit_next_request(struct usba_ep *ep)
-+{
-+	struct usba_request *req;
-+
-+	if (list_empty(&ep->queue)) {
-+		usba_ep_writel(ep, CTL_DIS, (USBA_BIT(TX_PK_RDY)
-+					      | USBA_BIT(RX_BK_RDY)));
-+		return;
-+	}
-+
-+	req = list_entry(ep->queue.next, struct usba_request, queue);
-+	if (!req->submitted)
-+		submit_request(ep, req);
-+}
-+
-+static void send_status(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+	ep->state = STATUS_STAGE_IN;
-+	usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
-+	usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
-+}
-+
-+static void receive_data(struct usba_ep *ep)
-+{
-+	struct usba_udc *udc = ep->udc;
-+	struct usba_request *req;
-+	unsigned long status;
-+	unsigned int bytecount, nr_busy;
-+	int is_complete = 0;
-+
-+	status = usba_ep_readl(ep, STA);
-+	nr_busy = USBA_BFEXT(BUSY_BANKS, status);
-+
-+	DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
-+
-+	while (nr_busy > 0) {
-+		if (list_empty(&ep->queue)) {
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
-+			break;
-+		}
-+		req = list_entry(ep->queue.next,
-+				 struct usba_request, queue);
-+
-+		bytecount = USBA_BFEXT(BYTE_COUNT, status);
-+
-+		if (status & (1 << 31))
-+			is_complete = 1;
-+		if (req->req.actual + bytecount >= req->req.length) {
-+			is_complete = 1;
-+			bytecount = req->req.length - req->req.actual;
-+		}
-+
-+		copy_from_fifo(req->req.buf + req->req.actual,
-+			       ep->fifo, bytecount);
-+		req->req.actual += bytecount;
-+
-+		usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
-+
-+		if (is_complete) {
-+			DBG(DBG_QUEUE, "%s: request done\n", ep_name(ep));
-+			req->req.status = 0;
-+			list_del_init(&req->queue);
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
-+			req->req.complete(&ep->ep, &req->req);
-+		}
-+
-+		status = usba_ep_readl(ep, STA);
-+		nr_busy = USBA_BFEXT(BUSY_BANKS, status);
-+
-+		if (is_complete && ep_is_control(ep)) {
-+			send_status(udc, ep);
-+			break;
-+		}
-+	}
-+}
-+
-+static void request_complete(struct usba_ep *ep,
-+			     struct usba_request *req,
-+			     int status)
-+{
-+	struct usba_udc *udc = ep->udc;
-+
-+	WARN_ON(!list_empty(&req->queue));
-+
-+	if (req->req.status == -EINPROGRESS)
-+		req->req.status = status;
-+
-+	if (req->mapped) {
-+		dma_unmap_single(
-+			&udc->pdev->dev, req->req.dma, req->req.length,
-+			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+		req->req.dma = DMA_ADDR_INVALID;
-+		req->mapped = 0;
-+	}
-+
-+	DBG(DBG_GADGET | DBG_REQ,
-+	    "%s: req %p complete: status %d, actual %u\n",
-+	    ep_name(ep), req, req->req.status, req->req.actual);
-+	req->req.complete(&ep->ep, &req->req);
-+}
-+
-+static void request_complete_list(struct usba_ep *ep,
-+				  struct list_head *list,
-+				  int status)
-+{
-+	struct usba_request *req, *tmp_req;
-+
-+	list_for_each_entry_safe(req, tmp_req, list, queue) {
-+		list_del_init(&req->queue);
-+		request_complete(ep, req, status);
-+	}
-+}
-+
-+static int usba_ep_enable(struct usb_ep *_ep,
-+			   const struct usb_endpoint_descriptor *desc)
-+{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+	unsigned long flags, ept_cfg, maxpacket;
-+
-+	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep_name(ep), desc);
-+
-+	maxpacket = le16_to_cpu(desc->wMaxPacketSize);
-+
-+	if (ep->index == 0
-+	    || desc->bDescriptorType != USB_DT_ENDPOINT
-+	    || ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
-+		!= ep->index)
-+	    || maxpacket == 0
-+	    || maxpacket > ep->fifo_size) {
-+		DBG(DBG_ERR, "ep_enable: Invalid argument");
-+		return -EINVAL;
-+	}
-+
-+	ep->is_isoc = 0;
-+	ep->is_in = 0;
-+
-+	if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-+	    == USB_ENDPOINT_XFER_ISOC) {
-+		    if (!ep->can_isoc) {
-+			    DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
-+				ep_name(ep));
-+			    return -EINVAL;
-+		    }
-+		    ep->is_isoc = 1;
-+	}
-+
-+	if (maxpacket <= 8)
-+		ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
-+	else
-+		/* LSB is bit 1, not 0 */
-+		ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
-+	DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
-+	    ep_name(ep), ept_cfg, maxpacket);
-+
-+	if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+		ep->is_in = 1;
-+		ept_cfg |= USBA_BIT(EPT_DIR);
-+	}
-+
-+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+	case USB_ENDPOINT_XFER_CONTROL:
-+		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
-+		break;
-+	case USB_ENDPOINT_XFER_ISOC:
-+		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
-+		break;
-+	case USB_ENDPOINT_XFER_BULK:
-+		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
-+		break;
-+	case USB_ENDPOINT_XFER_INT:
-+		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
-+		break;
-+	}
-+	ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks);
-+
-+	spin_lock_irqsave(&ep->udc->lock, flags);
-+
-+	if (ep->desc) {
-+		spin_unlock_irqrestore(&ep->udc->lock, flags);
-+		DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
-+		return -EBUSY;
-+	}
-+
-+	ep->desc = desc;
-+	ep->ep.maxpacket = maxpacket;
-+
-+	usba_ep_writel(ep, CFG, ept_cfg);
-+	usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
-+
-+	if (ep_can_dma(ep)) {
-+		u32 ctrl;
-+
-+		usba_writel(udc, INT_ENB,
-+			     (usba_readl(udc, INT_ENB)
-+			      | USBA_BF(EPT_INT, 1 << ep->index)
-+			      | USBA_BF(DMA_INT, 1 << ep->index)));
-+		ctrl = USBA_BIT(AUTO_VALID) | USBA_BIT(INTDIS_DMA);
-+		usba_ep_writel(ep, CTL_ENB, ctrl);
-+	} else {
-+		usba_writel(udc, INT_ENB,
-+			     (usba_readl(udc, INT_ENB)
-+			      | USBA_BF(EPT_INT, 1 << ep->index)));
-+	}
-+
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
-+	    (unsigned long)usba_ep_readl(ep, CFG));
-+	DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
-+	    (unsigned long)usba_readl(udc, INT_ENB));
-+
-+	return 0;
-+}
-+
-+static int usba_ep_disable(struct usb_ep *_ep)
-+{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+	LIST_HEAD(req_list);
-+	unsigned long flags;
-+
-+	DBG(DBG_GADGET, "ep_disable: %s\n", ep_name(ep));
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+
-+	if (!ep->desc) {
-+		spin_unlock_irqrestore(&udc->lock, flags);
-+		DBG(DBG_ERR, "ep_disable: %s not enabled\n",
-+		    ep_name(ep));
-+		return -EINVAL;
-+	}
-+	ep->desc = NULL;
-+
-+	list_splice_init(&ep->queue, &req_list);
-+	if (ep_can_dma(ep)) {
-+		usba_dma_writel(ep, CONTROL, 0);
-+		usba_dma_writel(ep, ADDRESS, 0);
-+		usba_dma_readl(ep, STATUS);
-+	}
-+	usba_ep_writel(ep, CTL_DIS, USBA_BIT(EPT_ENABLE));
-+	usba_writel(udc, INT_ENB, (usba_readl(udc, INT_ENB)
-+				    & ~USBA_BF(EPT_INT, 1 << ep->index)));
-+
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	request_complete_list(ep, &req_list, -ESHUTDOWN);
-+
-+	return 0;
-+}
-+
-+static struct usb_request *
-+usba_ep_alloc_request(struct usb_ep *_ep, unsigned gfp_flags)
-+{
-+	struct usba_request *req;
-+
-+	DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
-+
-+	req = kzalloc(sizeof(*req), gfp_flags);
-+	if (!req)
-+		return NULL;
-+
-+	INIT_LIST_HEAD(&req->queue);
-+	req->req.dma = DMA_ADDR_INVALID;
-+
-+	return &req->req;
-+}
-+
-+static void
-+usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+	struct usba_request *req = to_usba_req(_req);
-+
-+	DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
-+
-+	kfree(req);
-+}
-+
-+static void *usba_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
-+				   dma_addr_t *dma, unsigned gfp_flags)
-+{
-+	void *buf;
-+
-+	if (bytes < L1_CACHE_BYTES)
-+		bytes = L1_CACHE_BYTES;
-+
-+	buf = kmalloc(bytes, gfp_flags);
-+
-+	/*
-+	 * Seems like we have to map the buffer any chance we get.
-+	 * ether.c wants us to initialize the dma member of a
-+	 * different request than the one receiving the buffer, so one
-+	 * never knows...
-+	 *
-+	 * Ah, screw it.  The ether driver is probably wrong, and this
-+	 * is not the right place to do the mapping.  The driver
-+	 * shouldn't mess with our DMA mappings anyway.
-+	 */
-+	*dma = DMA_ADDR_INVALID;
-+
-+	return buf;
-+}
-+
-+static void usba_ep_free_buffer(struct usb_ep *_ep, void *buf,
-+				 dma_addr_t dma, unsigned bytes)
-+{
-+	DBG(DBG_GADGET, "ep_free_buffer: %s, buf %p (size %u)\n",
-+	    _ep->name, buf, bytes);
-+	kfree(buf);
-+}
-+
-+static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
-+		     struct usba_request *req, gfp_t gfp_flags)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
-+	    ep_name(ep), req->req.length, req->req.dma,
-+	    req->req.zero ? 'Z' : 'z',
-+	    req->req.short_not_ok ? 'S' : 's',
-+	    req->req.no_interrupt ? 'I' : 'i');
-+
-+	if (req->req.length > 0x10000) {
-+		/* Lengths from 0 to 65536 (inclusive) are supported */
-+		DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
-+		return -EINVAL;
-+	}
-+
-+	req->using_dma = 1;
-+
-+	if (req->req.dma == DMA_ADDR_INVALID) {
-+		req->req.dma = dma_map_single(
-+			&udc->pdev->dev, req->req.buf, req->req.length,
-+			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+		req->mapped = 1;
-+	} else {
-+		dma_sync_single_for_device(
-+			&udc->pdev->dev, req->req.dma, req->req.length,
-+			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+		req->mapped = 0;
-+	}
-+
-+	req->ctrl = (USBA_BF(DMA_BUF_LEN, req->req.length)
-+		     | USBA_BIT(DMA_CH_EN) | USBA_BIT(DMA_END_BUF_IE)
-+		     | USBA_BIT(DMA_END_TR_EN) | USBA_BIT(DMA_END_TR_IE));
-+
-+	if (ep_is_in(ep))
-+		req->ctrl |= USBA_BIT(DMA_END_BUF_EN);
-+
-+	/*
-+	 * Add this request to the queue and submit for DMA if
-+	 * possible. Check if we're still alive first -- we may have
-+	 * received a reset since last time we checked.
-+	 */
-+	ret = -ESHUTDOWN;
-+	spin_lock_irqsave(&udc->lock, flags);
-+	if (ep->desc) {
-+		if (list_empty(&ep->queue))
-+			submit_request(ep, req);
-+
-+		list_add_tail(&req->queue, &ep->queue);
-+		ret = 0;
-+	}
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	return ret;
-+}
-+
-+static int usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
-+			  gfp_t gfp_flags)
-+{
-+	struct usba_request *req = to_usba_req(_req);
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+	unsigned long flags;
-+	int ret;
-+
-+	DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ,
-+	    "%s: queue req %p, len %u\n", ep_name(ep), req, _req->length);
-+
-+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN
-+	    || !ep->desc)
-+		return -ESHUTDOWN;
-+
-+	req->submitted = 0;
-+	req->using_dma = 0;
-+	req->last_transaction = 0;
-+
-+	_req->status = -EINPROGRESS;
-+	_req->actual = 0;
-+
-+	if (ep_can_dma(ep))
-+		return queue_dma(udc, ep, req, gfp_flags);
-+
-+	/* May have received a reset since last time we checked */
-+	ret = -ESHUTDOWN;
-+	spin_lock_irqsave(&udc->lock, flags);
-+	if (ep->desc) {
-+		list_add_tail(&req->queue, &ep->queue);
-+
-+		if (ep_is_in(ep)
-+		    || (ep_is_control(ep)
-+			&& (ep->state == DATA_STAGE_IN
-+			    || ep->state == STATUS_STAGE_IN)))
-+			usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
-+		else
-+			usba_ep_writel(ep, CTL_ENB, USBA_BIT(RX_BK_RDY));
-+		ret = 0;
-+	}
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	return ret;
-+}
-+
-+static void usba_update_req(struct usba_ep *ep, struct usba_request *req,
-+			     u32 status)
-+{
-+	req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
-+}
-+
-+static int stop_dma(struct usba_ep *ep, u32 *pstatus)
-+{
-+	unsigned int timeout;
-+	u32 status;
-+
-+	/*
-+	 * Stop the DMA controller. When writing both CH_EN
-+	 * and LINK to 0, the other bits are not affected.
-+	 */
-+	usba_dma_writel(ep, CONTROL, 0);
-+
-+	/* Wait for the FIFO to empty */
-+	for (timeout = 40; timeout; --timeout) {
-+		status = usba_dma_readl(ep, STATUS);
-+		if (!(status & USBA_BIT(DMA_CH_EN)))
-+			break;
-+		udelay(1);
-+	}
-+
-+	if (pstatus)
-+		*pstatus = status;
-+
-+	if (timeout == 0) {
-+		dev_err(&ep->udc->pdev->dev,
-+			"%s: timed out waiting for DMA FIFO to empty\n",
-+			ep_name(ep));
-+		return -ETIMEDOUT;
-+	}
-+
-+	return 0;
-+}
-+
-+static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+	struct usba_request *req = to_usba_req(_req);
-+	unsigned long flags;
-+	u32 status;
-+
-+	DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
-+	    ep_name(ep), req);
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+
-+	if (req->using_dma) {
-+		/*
-+		 * If this request is currently being transferred,
-+		 * stop the DMA controller and reset the FIFO.
-+		 */
-+		if (ep->queue.next == &req->queue) {
-+			status = usba_dma_readl(ep, STATUS);
-+			if (status & USBA_BIT(DMA_CH_EN))
-+				stop_dma(ep, &status);
-+
-+#ifdef CONFIG_DEBUG_FS
-+			ep->last_dma_status = status;
-+#endif
-+
-+			usba_writel(udc, EPT_RST,
-+				     1 << ep_index(ep));
-+
-+			usba_update_req(ep, req, status);
-+		}
-+	}
-+
-+	/*
-+	 * Errors should stop the queue from advancing until the
-+	 * completion function returns.
-+	 */
-+	list_del_init(&req->queue);
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	request_complete(ep, req, -ECONNRESET);
-+
-+	/* Process the next request if any */
-+	spin_lock_irqsave(&udc->lock, flags);
-+	submit_next_request(ep);
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int usba_ep_set_halt(struct usb_ep *_ep, int value)
-+{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+	unsigned long flags;
-+	int ret = 0;
-+
-+	DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep_name(ep),
-+	    value ? "set" : "clear");
-+
-+	if (!ep->desc) {
-+		DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
-+		    ep_name(ep));
-+		return -ENODEV;
-+	}
-+	if (ep_is_isochronous(ep)) {
-+		DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
-+		    ep_name(ep));
-+		return -ENOTTY;
-+	}
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+
-+	/*
-+	 * We can't halt IN endpoints while there are still data to be
-+	 * transferred
-+	 */
-+	if (!list_empty(&ep->queue)
-+	    || ((value && ep_is_in(ep)
-+		 && (usba_ep_readl(ep, STA)
-+		     & USBA_BF(BUSY_BANKS, -1L))))) {
-+		ret = -EAGAIN;
-+	} else {
-+		if (value)
-+			usba_ep_writel(ep, SET_STA, USBA_BIT(FORCE_STALL));
-+		else
-+			usba_ep_writel(ep, CLR_STA, (USBA_BIT(FORCE_STALL)
-+						     | USBA_BIT(TOGGLE_SEQ)));
-+		usba_ep_readl(ep, STA);
-+	}
-+
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	return ret;
-+}
-+
-+static int usba_ep_fifo_status(struct usb_ep *_ep)
-+{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+
-+	return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
-+}
-+
-+static void usba_ep_fifo_flush(struct usb_ep *_ep)
-+{
-+	struct usba_ep *ep = to_usba_ep(_ep);
-+	struct usba_udc *udc = ep->udc;
-+
-+	usba_writel(udc, EPT_RST, 1 << ep->index);
-+}
-+
-+struct usb_ep_ops usba_ep_ops = {
-+	.enable		= usba_ep_enable,
-+	.disable	= usba_ep_disable,
-+	.alloc_request	= usba_ep_alloc_request,
-+	.free_request	= usba_ep_free_request,
-+	.alloc_buffer	= usba_ep_alloc_buffer,
-+	.free_buffer	= usba_ep_free_buffer,
-+	.queue		= usba_ep_queue,
-+	.dequeue	= usba_ep_dequeue,
-+	.set_halt	= usba_ep_set_halt,
-+	.fifo_status	= usba_ep_fifo_status,
-+	.fifo_flush	= usba_ep_fifo_flush,
-+};
-+
-+static int usba_udc_get_frame(struct usb_gadget *gadget)
-+{
-+	struct usba_udc *udc = to_usba_udc(gadget);
-+
-+	return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
-+}
-+
-+struct usb_gadget_ops usba_udc_ops = {
-+	.get_frame	= usba_udc_get_frame,
-+};
-+
-+#define EP(nam, type, idx, dma, isoc)				\
-+{								\
-+	.ep	= {						\
-+		.ops		= &usba_ep_ops,			\
-+		.name		= nam,				\
-+		.maxpacket	= type##_FIFO_SIZE,		\
-+	},							\
-+	.udc		= &the_udc,				\
-+	.queue		= LIST_HEAD_INIT(usba_ep[idx].queue),	\
-+	.fifo_size	= type##_FIFO_SIZE,			\
-+	.nr_banks	= type##_NR_BANKS,			\
-+	.index		= idx,					\
-+	.can_dma	= dma,					\
-+	.can_isoc	= isoc,					\
-+}
-+
-+static struct usba_ep usba_ep[] = {
-+	EP("ep0", EP0, 0, 0, 0),
-+	EP("ep1in-bulk", BULK, 1, 1, 0),
-+	EP("ep2out-bulk", BULK, 2, 1, 0),
-+	EP("ep3in-iso", ISO, 3, 1, 1),
-+	EP("ep4out-iso", ISO, 4, 1, 1),
-+	EP("ep5in-int", INT, 5, 1, 0),
-+	EP("ep6out-int", INT, 6, 1, 0),
-+};
-+#undef EP
-+
-+static struct usb_endpoint_descriptor usba_ep0_desc = {
-+	.bLength = USB_DT_ENDPOINT_SIZE,
-+	.bDescriptorType = USB_DT_ENDPOINT,
-+	.bEndpointAddress = 0,
-+	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
-+	.wMaxPacketSize = __constant_cpu_to_le16(64),
-+	/* FIXME: I have no idea what to put here */
-+	.bInterval = 1,
-+};
-+
-+static void nop_release(struct device *dev)
-+{
-+
-+}
-+
-+static struct usba_udc the_udc = {
-+	.gadget	= {
-+		.ops		= &usba_udc_ops,
-+		.ep0		= &usba_ep[0].ep,
-+		.ep_list	= LIST_HEAD_INIT(the_udc.gadget.ep_list),
-+		.is_dualspeed	= 1,
-+		.name		= "atmel_usba_udc",
-+		.dev	= {
-+			.bus_id		= "gadget",
-+			.release	= nop_release,
-+		},
-+	},
-+
-+	.lock	= SPIN_LOCK_UNLOCKED,
-+};
-+
-+/*
-+ * Called with interrupts disabled and udc->lock held.
-+ */
-+static void reset_all_endpoints(struct usba_udc *udc)
-+{
-+	struct usba_ep *ep;
-+	struct usba_request *req, *tmp_req;
-+
-+	usba_writel(udc, EPT_RST, ~0UL);
-+
-+	ep = to_usba_ep(udc->gadget.ep0);
-+	list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
-+		list_del_init(&req->queue);
-+		request_complete(ep, req, -ECONNRESET);
-+	}
-+
-+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
-+		if (ep->desc)
-+			usba_ep_disable(&ep->ep);
-+	}
-+}
-+
-+static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
-+{
-+	struct usba_ep *ep;
-+
-+	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-+		return to_usba_ep(udc->gadget.ep0);
-+
-+	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
-+		u8 bEndpointAddress;
-+
-+		if (!ep->desc)
-+			continue;
-+		bEndpointAddress = ep->desc->bEndpointAddress;
-+		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
-+			continue;
-+		if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
-+		    == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
-+			return ep;
-+	}
-+
-+	return NULL;
-+}
-+
-+/* Called with interrupts disabled and udc->lock held */
-+static inline void set_protocol_stall(struct usba_udc *udc,
-+				      struct usba_ep *ep)
-+{
-+	usba_ep_writel(ep, SET_STA, USBA_BIT(FORCE_STALL));
-+	ep->state = WAIT_FOR_SETUP;
-+}
-+
-+static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+	if (usba_ep_readl(ep, STA) & USBA_BIT(FORCE_STALL))
-+		return 1;
-+	return 0;
-+}
-+
-+static inline void set_address(struct usba_udc *udc, unsigned int addr)
-+{
-+	u32 regval;
-+
-+	DBG(DBG_BUS, "setting address %u...\n", addr);
-+	regval = usba_readl(udc, CTRL);
-+	regval = USBA_BFINS(DEV_ADDR, addr, regval);
-+	usba_writel(udc, CTRL, regval);
-+}
-+
-+static int do_test_mode(struct usba_udc *udc)
-+{
-+	static const char test_packet_buffer[] = {
-+		/* JKJKJKJK * 9 */
-+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+		/* JJKKJJKK * 8 */
-+		0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
-+		/* JJKKJJKK * 8 */
-+		0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
-+		/* JJJJJJJKKKKKKK * 8 */
-+		0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-+		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-+		/* JJJJJJJK * 8 */
-+		0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
-+		/* {JKKKKKKK * 10}, JK */
-+		0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
-+	};
-+	struct device *dev = &udc->pdev->dev;
-+	struct usba_ep *ep;
-+	int test_mode;
-+
-+	test_mode = udc->test_mode;
-+
-+	/* Start from a clean slate */
-+	reset_all_endpoints(udc);
-+
-+	switch (test_mode) {
-+	case 0x0100:
-+		/* Test_J */
-+		usba_writel(udc, TST, USBA_BIT(TST_J_MODE));
-+		dev_info(dev, "Entering Test_J mode...\n");
-+		break;
-+	case 0x0200:
-+		/* Test_K */
-+		usba_writel(udc, TST, USBA_BIT(TST_K_MODE));
-+		dev_info(dev, "Entering Test_K mode...\n");
-+		break;
-+	case 0x0300:
-+		/*
-+		 * Test_SE0_NAK: Force high-speed mode and set up ep0
-+		 * for Bulk IN transfers
-+		 */
-+		ep = &usba_ep[0];
-+		usba_writel(udc, TST,
-+			     USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
-+		usba_ep_writel(ep, CFG,
-+				USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
-+				| USBA_BIT(EPT_DIR)
-+				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
-+				| USBA_BF(BK_NUMBER, 1));
-+		if (!(usba_ep_readl(ep, CFG) & USBA_BIT(EPT_MAPPED))) {
-+			set_protocol_stall(udc, ep);
-+			dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
-+		} else {
-+			usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
-+			dev_info(dev, "Entering Test_SE0_NAK mode...\n");
-+		}
-+		break;
-+	case 0x0400:
-+		/* Test_Packet */
-+		ep = &usba_ep[0];
-+		usba_ep_writel(ep, CFG,
-+				USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
-+				| USBA_BIT(EPT_DIR)
-+				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
-+				| USBA_BF(BK_NUMBER, 1));
-+		if (!(usba_ep_readl(ep, CFG) & USBA_BIT(EPT_MAPPED))) {
-+			set_protocol_stall(udc, ep);
-+			dev_err(dev, "Test_Packet: ep0 not mapped\n");
-+		} else {
-+			usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
-+			usba_writel(udc, TST, USBA_BIT(TST_PKT_MODE));
-+			copy_to_fifo(ep->fifo, test_packet_buffer,
-+				     sizeof(test_packet_buffer));
-+			usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
-+			dev_info(dev, "Entering Test_Packet mode...\n");
-+		}
-+		break;
-+	default:
-+		dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Avoid overly long expressions */
-+static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
-+{
-+	if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
-+		return true;
-+	return false;
-+}
-+
-+static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
-+{
-+	if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
-+		return true;
-+	return false;
-+}
-+
-+static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
-+{
-+	if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
-+		return true;
-+	return false;
-+}
-+
-+static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
-+			    struct usb_ctrlrequest *crq)
-+{
-+	switch (crq->bRequest) {
-+	case USB_REQ_GET_STATUS: {
-+		u16 status;
-+
-+		if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
-+			/* Self-powered, no remote wakeup */
-+			status = __constant_cpu_to_le16(1 << 0);
-+		} else if (crq->bRequestType
-+			   == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
-+			status = __constant_cpu_to_le16(0);
-+		} else if (crq->bRequestType
-+			   == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
-+			struct usba_ep *target;
-+
-+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+			if (!target)
-+				goto stall;
-+
-+			status = 0;
-+			if (is_stalled(udc, target))
-+				status |= __constant_cpu_to_le16(1);
-+		} else {
-+			goto delegate;
-+		}
-+
-+		/* Write directly to the FIFO. No queueing is done. */
-+		if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
-+			goto stall;
-+		ep->state = DATA_STAGE_IN;
-+		__raw_writew(status, ep->fifo);
-+		usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
-+		break;
-+	}
-+
-+	case USB_REQ_CLEAR_FEATURE: {
-+		if (crq->bRequestType == USB_RECIP_DEVICE) {
-+			if (feature_is_dev_remote_wakeup(crq)) {
-+				/* TODO: Handle REMOTE_WAKEUP */
-+			} else {
-+				/* Can't CLEAR_FEATURE TEST_MODE */
-+				goto stall;
-+			}
-+		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
-+			struct usba_ep *target;
-+
-+			if (!feature_is_ep_halt(crq)
-+			    || crq->wLength != __constant_cpu_to_le16(0))
-+				goto stall;
-+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+			if (!target)
-+				goto stall;
-+
-+			usba_ep_writel(target, CLR_STA,
-+				       (USBA_BIT(FORCE_STALL)
-+					| USBA_BIT(TOGGLE_SEQ)));
-+		} else {
-+			goto delegate;
-+		}
-+
-+		send_status(udc, ep);
-+		break;
-+	}
-+
-+	case USB_REQ_SET_FEATURE: {
-+		if (crq->bRequestType == USB_RECIP_DEVICE) {
-+			if (feature_is_dev_test_mode(crq)) {
-+				send_status(udc, ep);
-+				ep->state = STATUS_STAGE_TEST;
-+				udc->test_mode = le16_to_cpu(crq->wIndex);
-+				return 0;
-+			} else if (feature_is_dev_remote_wakeup(crq)) {
-+				/* TODO: Handle REMOTE_WAKEUP */
-+			} else {
-+				goto stall;
-+			}
-+		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
-+			struct usba_ep *target;
-+
-+			if (!feature_is_ep_halt(crq)
-+			    || crq->wLength != __constant_cpu_to_le16(0))
-+				goto stall;
-+
-+			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+			if (!target)
-+				goto stall;
-+
-+			usba_ep_writel(target, SET_STA, USBA_BIT(FORCE_STALL));
-+		} else
-+			goto delegate;
-+
-+		send_status(udc, ep);
-+		break;
-+	}
-+
-+	case USB_REQ_SET_ADDRESS:
-+		if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
-+			goto delegate;
-+
-+		set_address(udc, le16_to_cpu(crq->wValue));
-+		send_status(udc, ep);
-+		ep->state = STATUS_STAGE_ADDR;
-+		break;
-+
-+	default:
-+delegate:
-+		return udc->driver->setup(&udc->gadget, crq);
-+	}
-+
-+	return 0;
-+
-+stall:
-+	printk(KERN_ERR
-+	       "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
-+	       "halting endpoint...\n",
-+	       ep_name(ep), crq->bRequestType, crq->bRequest,
-+	       le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
-+	       le16_to_cpu(crq->wLength));
-+	set_protocol_stall(udc, ep);
-+	return -1;
-+}
-+
-+static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+	struct usba_request *req;
-+	u32 epstatus;
-+	u32 epctrl;
-+
-+restart:
-+	epstatus = usba_ep_readl(ep, STA);
-+	epctrl = usba_ep_readl(ep, CTL);
-+
-+	DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
-+	    ep_name(ep), ep->state, epstatus, epctrl);
-+
-+	req = NULL;
-+	if (!list_empty(&ep->queue))
-+		req = list_entry(ep->queue.next,
-+				 struct usba_request, queue);
-+
-+	if ((epctrl & USBA_BIT(TX_PK_RDY))
-+	    && !(epstatus & USBA_BIT(TX_PK_RDY))) {
-+		if (req->submitted)
-+			next_fifo_transaction(ep, req);
-+		else
-+			submit_request(ep, req);
-+
-+		if (req->last_transaction) {
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
-+			usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
-+		}
-+		goto restart;
-+	}
-+	if ((epstatus & epctrl) & USBA_BIT(TX_COMPLETE)) {
-+		usba_ep_writel(ep, CLR_STA, USBA_BIT(TX_COMPLETE));
-+
-+		switch (ep->state) {
-+		case DATA_STAGE_IN:
-+			usba_ep_writel(ep, CTL_ENB, USBA_BIT(RX_BK_RDY));
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
-+			ep->state = STATUS_STAGE_OUT;
-+			break;
-+		case STATUS_STAGE_ADDR:
-+			/* Activate our new address */
-+			usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
-+						| USBA_BIT(FADDR_EN)));
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
-+			ep->state = WAIT_FOR_SETUP;
-+			break;
-+		case STATUS_STAGE_IN:
-+			if (req) {
-+				list_del_init(&req->queue);
-+				request_complete(ep, req, 0);
-+				submit_next_request(ep);
-+			}
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
-+			ep->state = WAIT_FOR_SETUP;
-+			break;
-+		case STATUS_STAGE_TEST:
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
-+			ep->state = WAIT_FOR_SETUP;
-+			if (do_test_mode(udc))
-+				set_protocol_stall(udc, ep);
-+			break;
-+		default:
-+			printk(KERN_ERR
-+			       "udc: %s: TXCOMP: Invalid endpoint state %d, "
-+			       "halting endpoint...\n",
-+			       ep_name(ep), ep->state);
-+			set_protocol_stall(udc, ep);
-+			break;
-+		}
-+
-+		goto restart;
-+	}
-+	if ((epstatus & epctrl) & USBA_BIT(RX_BK_RDY)) {
-+		switch (ep->state) {
-+		case STATUS_STAGE_OUT:
-+			usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
-+
-+			if (req) {
-+				list_del_init(&req->queue);
-+				request_complete(ep, req, 0);
-+			}
-+			ep->state = WAIT_FOR_SETUP;
-+			break;
-+
-+		case DATA_STAGE_OUT:
-+			receive_data(ep);
-+			break;
-+
-+		default:
-+			usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
-+			printk(KERN_ERR
-+			       "udc: %s: RXRDY: Invalid endpoint state %d, "
-+			       "halting endpoint...\n",
-+			       ep_name(ep), ep->state);
-+			set_protocol_stall(udc, ep);
-+			break;
-+		}
-+
-+		goto restart;
-+	}
-+	if (epstatus & USBA_BIT(RX_SETUP)) {
-+		union {
-+			struct usb_ctrlrequest crq;
-+			unsigned long data[2];
-+		} crq;
-+		unsigned int pkt_len;
-+		int ret;
-+
-+		if (ep->state != WAIT_FOR_SETUP) {
-+			/*
-+			 * Didn't expect a SETUP packet at this
-+			 * point. Clean up any pending requests (which
-+			 * may be successful).
-+			 */
-+			int status = -EPROTO;
-+
-+			/*
-+			 * RXRDY and TXCOMP are dropped when SETUP
-+			 * packets arrive.  Just pretend we received
-+			 * the status packet.
-+			 */
-+			if (ep->state == STATUS_STAGE_OUT
-+			    || ep->state == STATUS_STAGE_IN) {
-+				usba_ep_writel(ep, CTL_DIS,
-+					       USBA_BIT(RX_BK_RDY));
-+				status = 0;
-+			}
-+
-+			if (req) {
-+				list_del_init(&req->queue);
-+				request_complete(ep, req, status);
-+			}
-+		}
-+
-+		pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
-+		DBG(DBG_HW, "Packet length: %u\n", pkt_len);
-+		if (pkt_len != sizeof(crq)) {
-+			printk(KERN_WARNING
-+			       "udc: Invalid packet length %u (expected %lu)\n",
-+			       pkt_len, sizeof(crq));
-+			set_protocol_stall(udc, ep);
-+			return;
-+		}
-+
-+		DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
-+		copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
-+
-+		/* Free up one bank in the FIFO so that we can
-+		 * generate or receive a reply right away. */
-+		usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_SETUP));
-+
-+		/* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
-+		       ep->state, crq.crq.bRequestType,
-+		       crq.crq.bRequest); */
-+
-+		if (crq.crq.bRequestType & USB_DIR_IN) {
-+			/*
-+			 * The USB 2.0 spec states that "if wLength is
-+			 * zero, there is no data transfer phase."
-+			 * However, testusb #14 seems to actually
-+			 * expect a data phase even if wLength = 0...
-+			 */
-+			ep->state = DATA_STAGE_IN;
-+		} else {
-+			if (crq.crq.wLength != __constant_cpu_to_le16(0))
-+				ep->state = DATA_STAGE_OUT;
-+			else
-+				ep->state = STATUS_STAGE_IN;
-+		}
-+
-+		ret = -1;
-+		if (ep->index == 0)
-+			ret = handle_ep0_setup(udc, ep, &crq.crq);
-+		else
-+			ret = udc->driver->setup(&udc->gadget, &crq.crq);
-+
-+		DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
-+		    crq.crq.bRequestType, crq.crq.bRequest,
-+		    le16_to_cpu(crq.crq.wLength), ep->state, ret);
-+
-+		if (ret < 0) {
-+			/* Let the host know that we failed */
-+			set_protocol_stall(udc, ep);
-+		}
-+	}
-+}
-+
-+static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+	struct usba_request *req;
-+	u32 epstatus;
-+	u32 epctrl;
-+
-+	epstatus = usba_ep_readl(ep, STA);
-+	epctrl = usba_ep_readl(ep, CTL);
-+
-+	DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n",
-+	    ep_name(ep), epstatus);
-+
-+	while ((epctrl & USBA_BIT(TX_PK_RDY))
-+	       && !(epstatus & USBA_BIT(TX_PK_RDY))) {
-+		DBG(DBG_BUS, "%s: TX PK ready\n", ep_name(ep));
-+
-+		if (list_empty(&ep->queue)) {
-+			dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
-+			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
-+			return;
-+		}
-+
-+		req = list_entry(ep->queue.next, struct usba_request, queue);
-+
-+		if (req->using_dma) {
-+			/* Send a zero-length packet */
-+			usba_ep_writel(ep, SET_STA,
-+					USBA_BIT(TX_PK_RDY));
-+			usba_ep_writel(ep, CTL_DIS,
-+					USBA_BIT(TX_PK_RDY));
-+			list_del_init(&req->queue);
-+			submit_next_request(ep);
-+			request_complete(ep, req, 0);
-+		} else {
-+			if (req->submitted)
-+				next_fifo_transaction(ep, req);
-+			else
-+				submit_request(ep, req);
-+
-+			if (req->last_transaction) {
-+				list_del_init(&req->queue);
-+				submit_next_request(ep);
-+				request_complete(ep, req, 0);
-+			}
-+		}
-+
-+		epstatus = usba_ep_readl(ep, STA);
-+		epctrl = usba_ep_readl(ep, CTL);
-+	}
-+	if ((epstatus & epctrl) & USBA_BIT(RX_BK_RDY)) {
-+		DBG(DBG_BUS, "%s: RX data ready\n", ep_name(ep));
-+		receive_data(ep);
-+		usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
-+	}
-+}
-+
-+static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+	struct usba_request *req;
-+	u32 status, control, pending;
-+
-+	status = usba_dma_readl(ep, STATUS);
-+	control = usba_dma_readl(ep, CONTROL);
-+#ifdef CONFIG_DEBUG_FS
-+	ep->last_dma_status = status;
-+#endif
-+	pending = status & control;
-+	DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n",
-+	    status, control);
-+
-+	if (status & USBA_BIT(DMA_CH_EN)) {
-+		dev_err(&udc->pdev->dev,
-+			"DMA_CH_EN is set after transfer is finished!\n");
-+		dev_err(&udc->pdev->dev,
-+		       "status=%#08x, pending=%#08x, control=%#08x\n",
-+		       status, pending, control);
-+
-+		/*
-+		 * try to pretend nothing happened. We might have to
-+		 * do something here...
-+		 */
-+	}
-+
-+	if (list_empty(&ep->queue))
-+		/* Might happen if a reset comes along at the right moment */
-+		return;
-+
-+	if (pending & (USBA_BIT(DMA_END_TR_ST) | USBA_BIT(DMA_END_BUF_ST))) {
-+		req = list_entry(ep->queue.next, struct usba_request, queue);
-+		usba_update_req(ep, req, status);
-+
-+		list_del_init(&req->queue);
-+		submit_next_request(ep);
-+		request_complete(ep, req, 0);
-+	}
-+}
-+
-+static irqreturn_t usba_udc_irq(int irq, void *devid)
-+{
-+	struct usba_udc *udc = devid;
-+	u32 status;
-+	u32 dma_status;
-+	u32 ep_status;
-+
-+	spin_lock(&udc->lock);
-+
-+	status = usba_readl(udc, INT_STA);
-+	DBG(DBG_INT, "irq, status=%#08x\n", status);
-+
-+	if (status & USBA_BIT(DET_SUSPEND)) {
-+		usba_writel(udc, INT_CLR, USBA_BIT(DET_SUSPEND));
-+		DBG(DBG_BUS, "Suspend detected\n");
-+		if (udc->gadget.speed != USB_SPEED_UNKNOWN
-+		    && udc->driver && udc->driver->suspend)
-+			udc->driver->suspend(&udc->gadget);
-+	}
-+
-+	if (status & USBA_BIT(WAKE_UP)) {
-+		usba_writel(udc, INT_CLR, USBA_BIT(WAKE_UP));
-+		DBG(DBG_BUS, "Wake Up CPU detected\n");
-+	}
-+
-+	if (status & USBA_BIT(END_OF_RESUME)) {
-+		usba_writel(udc, INT_CLR, USBA_BIT(END_OF_RESUME));
-+		DBG(DBG_BUS, "Resume detected\n");
-+		if (udc->gadget.speed != USB_SPEED_UNKNOWN
-+		    && udc->driver && udc->driver->resume)
-+			udc->driver->resume(&udc->gadget);
-+	}
-+
-+	dma_status = USBA_BFEXT(DMA_INT, status);
-+	if (dma_status) {
-+		int i;
-+
-+		for (i = 1; i < USBA_NR_ENDPOINTS; i++)
-+			if (dma_status & (1 << i))
-+				usba_dma_irq(udc, &usba_ep[i]);
-+	}
-+
-+	ep_status = USBA_BFEXT(EPT_INT, status);
-+	if (ep_status) {
-+		int i;
-+
-+		for (i = 0; i < USBA_NR_ENDPOINTS; i++)
-+			if (ep_status & (1 << i)) {
-+				if (ep_is_control(&usba_ep[i]))
-+					usba_control_irq(udc, &usba_ep[i]);
-+				else
-+					usba_ep_irq(udc, &usba_ep[i]);
-+			}
-+	}
-+
-+	if (status & USBA_BIT(END_OF_RESET)) {
-+		struct usba_ep *ep0;
-+
-+		usba_writel(udc, INT_CLR, USBA_BIT(END_OF_RESET));
-+		reset_all_endpoints(udc);
-+
-+		if (status & USBA_BIT(HIGH_SPEED)) {
-+			DBG(DBG_BUS, "High-speed bus reset detected\n");
-+			udc->gadget.speed = USB_SPEED_HIGH;
-+		} else {
-+			DBG(DBG_BUS, "Full-speed bus reset detected\n");
-+			udc->gadget.speed = USB_SPEED_FULL;
-+		}
-+
-+		ep0 = &usba_ep[0];
-+		ep0->desc = &usba_ep0_desc;
-+		ep0->state = WAIT_FOR_SETUP;
-+		usba_ep_writel(ep0, CFG,
-+			       (USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
-+				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
-+				| USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
-+		usba_ep_writel(ep0, CTL_ENB,
-+			       USBA_BIT(EPT_ENABLE) | USBA_BIT(RX_SETUP));
-+		usba_writel(udc, INT_ENB, (usba_readl(udc, INT_ENB)
-+					   | USBA_BF(EPT_INT, 1)
-+					   | USBA_BIT(DET_SUSPEND)
-+					   | USBA_BIT(END_OF_RESUME)));
-+
-+		if (!(usba_ep_readl(ep0, CFG) & USBA_BIT(EPT_MAPPED)))
-+			dev_warn(&udc->pdev->dev,
-+				 "WARNING: EP0 configuration is invalid!\n");
-+	}
-+
-+	spin_unlock(&udc->lock);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t usba_vbus_irq(int irq, void *devid)
-+{
-+	struct usba_udc *udc = devid;
-+	int vbus;
-+
-+	/* debounce */
-+	udelay(10);
-+
-+	spin_lock(&udc->lock);
-+	vbus = gpio_get_value(udc->vbus_pin);
-+	if (vbus != udc->vbus_prev) {
-+		if (vbus) {
-+			usba_writel(udc, CTRL, USBA_BIT(EN_USBA));
-+			usba_writel(udc, INT_ENB, USBA_BIT(END_OF_RESET));
-+		} else {
-+			udc->gadget.speed = USB_SPEED_UNKNOWN;
-+			reset_all_endpoints(udc);
-+			usba_writel(udc, CTRL, 0);
-+			if (udc->driver)
-+				udc->driver->disconnect(&udc->gadget);
-+		}
-+		udc->vbus_prev = vbus;
-+	}
-+	spin_unlock(&udc->lock);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-+{
-+	struct usba_udc *udc = &the_udc;
-+	unsigned long flags;
-+	int ret;
-+
-+	if (!udc->pdev)
-+		return -ENODEV;
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+	if (udc->driver) {
-+		spin_unlock_irqrestore(&udc->lock, flags);
-+		return -EBUSY;
-+	}
-+
-+	udc->driver = driver;
-+	udc->gadget.dev.driver = &driver->driver;
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	clk_enable(udc->pclk);
-+	clk_enable(udc->hclk);
-+
-+	ret = driver->bind(&udc->gadget);
-+	if (ret) {
-+		DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
-+		    driver->driver.name, ret);
-+		goto err_driver_bind;
-+	}
-+
-+	DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
-+
-+	udc->vbus_prev = 0;
-+	if (udc->vbus_pin != -1) {
-+		ret = request_irq(gpio_to_irq(udc->vbus_pin),
-+				  usba_vbus_irq, 0, "atmel_usba_udc", udc);
-+		if (ret) {
-+			gpio_free(udc->vbus_pin);
-+			udc->vbus_pin = -1;
-+			dev_warn(&udc->pdev->dev,
-+				 "failed to request vbus irq; "
-+				 "assuming always on\n");
-+		}
-+	}
-+
-+	/* If Vbus is present, enable the controller and wait for reset */
-+	spin_lock_irqsave(&udc->lock, flags);
-+	if (vbus_is_present(udc) && udc->vbus_prev == 0) {
-+		usba_writel(udc, CTRL, USBA_BIT(EN_USBA));
-+		usba_writel(udc, INT_ENB, USBA_BIT(END_OF_RESET));
-+	}
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	return 0;
-+
-+err_driver_bind:
-+	udc->driver = NULL;
-+	udc->gadget.dev.driver = NULL;
-+	return ret;
-+}
-+EXPORT_SYMBOL(usb_gadget_register_driver);
-+
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-+{
-+	struct usba_udc *udc = &the_udc;
-+	unsigned long flags;
-+
-+	if (!udc->pdev)
-+		return -ENODEV;
-+	if (driver != udc->driver)
-+		return -EINVAL;
-+
-+	if (udc->vbus_pin != -1)
-+		free_irq(gpio_to_irq(udc->vbus_pin), udc);
-+
-+	spin_lock_irqsave(&udc->lock, flags);
-+	udc->gadget.speed = USB_SPEED_UNKNOWN;
-+	reset_all_endpoints(udc);
-+	spin_unlock_irqrestore(&udc->lock, flags);
-+
-+	/* This will also disable the DP pullup */
-+	usba_writel(udc, CTRL, 0);
-+
-+	driver->unbind(&udc->gadget);
-+	udc->gadget.dev.driver = NULL;
-+	udc->driver = NULL;
-+
-+	clk_disable(udc->hclk);
-+	clk_disable(udc->pclk);
-+
-+	DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
-+
-+static int __devinit usba_udc_probe(struct platform_device *pdev)
-+{
-+	struct usba_platform_data *pdata = pdev->dev.platform_data;
-+	struct resource *regs, *fifo;
-+	struct clk *pclk, *hclk;
-+	struct usba_udc *udc = &the_udc;
-+	int irq, ret, i;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
-+	fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
-+	if (!regs || !fifo)
-+		return -ENXIO;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return irq;
-+
-+	pclk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(pclk))
-+		return PTR_ERR(pclk);
-+	hclk = clk_get(&pdev->dev, "hclk");
-+	if (IS_ERR(hclk)) {
-+		ret = PTR_ERR(hclk);
-+		goto err_get_hclk;
-+	}
-+
-+	udc->pdev = pdev;
-+	udc->pclk = pclk;
-+	udc->hclk = hclk;
-+	udc->vbus_pin = -1;
-+
-+	ret = -ENOMEM;
-+	udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!udc->regs) {
-+		dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
-+		goto err_map_regs;
-+	}
-+	dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
-+		 (unsigned long)regs->start, udc->regs);
-+	udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
-+	if (!udc->fifo) {
-+		dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
-+		goto err_map_fifo;
-+	}
-+	dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
-+		 (unsigned long)fifo->start, udc->fifo);
-+
-+	device_initialize(&udc->gadget.dev);
-+	udc->gadget.dev.parent = &pdev->dev;
-+	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
-+
-+	platform_set_drvdata(pdev, udc);
-+
-+	/* Make sure we start from a clean slate */
-+	clk_enable(pclk);
-+	usba_writel(udc, CTRL, 0);
-+	clk_disable(pclk);
-+
-+	INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
-+	usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
-+	usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
-+	usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
-+	for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
-+		struct usba_ep *ep = &usba_ep[i];
-+
-+		ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
-+		ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
-+		ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
-+
-+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
-+	}
-+
-+	ret = request_irq(irq, usba_udc_irq, IRQF_SAMPLE_RANDOM,
-+			  "atmel_usba_udc", udc);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
-+			irq, ret);
-+		goto err_request_irq;
-+	}
-+	udc->irq = irq;
-+
-+	ret = device_add(&udc->gadget.dev);
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
-+		goto err_device_add;
-+	}
-+
-+	if (pdata && pdata->vbus_pin != GPIO_PIN_NONE)
-+		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc"))
-+			udc->vbus_pin = pdata->vbus_pin;
-+
-+	usba_init_debugfs(udc);
-+	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+		usba_ep_init_debugfs(udc, &usba_ep[i]);
-+
-+	return 0;
-+
-+err_device_add:
-+	free_irq(irq, udc);
-+err_request_irq:
-+	iounmap(udc->fifo);
-+err_map_fifo:
-+	iounmap(udc->regs);
-+err_map_regs:
-+	clk_put(hclk);
-+err_get_hclk:
-+	clk_put(pclk);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return ret;
-+}
-+
-+static int __devexit usba_udc_remove(struct platform_device *pdev)
-+{
-+	struct usba_udc *udc;
-+	int i;
-+
-+	udc = platform_get_drvdata(pdev);
-+
-+	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+		usba_ep_cleanup_debugfs(&usba_ep[i]);
-+	usba_cleanup_debugfs(udc);
-+
-+	if (udc->vbus_pin != -1)
-+		gpio_free(udc->vbus_pin);
-+
-+	free_irq(udc->irq, udc);
-+	iounmap(udc->fifo);
-+	iounmap(udc->regs);
-+	clk_put(udc->hclk);
-+	clk_put(udc->pclk);
-+
-+	device_unregister(&udc->gadget.dev);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver udc_driver = {
-+	.probe		= usba_udc_probe,
-+	.remove		= __devexit_p(usba_udc_remove),
-+	.driver		= {
-+		.name		= "atmel_usba_udc",
-+	},
-+};
-+
-+static int __init udc_init(void)
-+{
-+	return platform_driver_register(&udc_driver);
-+}
-+module_init(udc_init);
-+
-+static void __exit udc_exit(void)
-+{
-+	platform_driver_unregister(&udc_driver);
-+}
-+module_exit(udc_exit);
-+
-+MODULE_DESCRIPTION("Atmel USBA UDC driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
-new file mode 100644
-index 0000000..408d2ce
---- /dev/null
-+++ b/drivers/usb/gadget/atmel_usba_udc.h
-@@ -0,0 +1,402 @@
-+/*
-+ * Driver for the Atmel USBA high speed USB device controller
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
-+#define __LINUX_USB_GADGET_USBA_UDC_H__
-+
-+/* USB register offsets */
-+#define USBA_CTRL				0x0000
-+#define USBA_FNUM				0x0004
-+#define USBA_INT_ENB				0x0010
-+#define USBA_INT_STA				0x0014
-+#define USBA_INT_CLR				0x0018
-+#define USBA_EPT_RST				0x001c
-+#define USBA_TST_SOF_CNT			0x00d0
-+#define USBA_TST_CNT_A				0x00d4
-+#define USBA_TST_CNT_B				0x00d8
-+#define USBA_TST_MODE_REG			0x00dc
-+#define USBA_TST				0x00e0
-+
-+/* USB endpoint register offsets */
-+#define USBA_EPT_CFG				0x0000
-+#define USBA_EPT_CTL_ENB			0x0004
-+#define USBA_EPT_CTL_DIS			0x0008
-+#define USBA_EPT_CTL				0x000c
-+#define USBA_EPT_SET_STA			0x0014
-+#define USBA_EPT_CLR_STA			0x0018
-+#define USBA_EPT_STA				0x001c
-+
-+/* USB DMA register offsets */
-+#define USBA_DMA_NXT_DSC			0x0000
-+#define USBA_DMA_ADDRESS			0x0004
-+#define USBA_DMA_CONTROL			0x0008
-+#define USBA_DMA_STATUS				0x000c
-+
-+/* Bitfields in CTRL */
-+#define USBA_DEV_ADDR_OFFSET			0
-+#define USBA_DEV_ADDR_SIZE			7
-+#define USBA_FADDR_EN_OFFSET			7
-+#define USBA_FADDR_EN_SIZE			1
-+#define USBA_EN_USBA_OFFSET			8
-+#define USBA_EN_USBA_SIZE			1
-+#define USBA_DETACH_OFFSET			9
-+#define USBA_DETACH_SIZE			1
-+#define USBA_REMOTE_WAKE_UP_OFFSET		10
-+#define USBA_REMOTE_WAKE_UP_SIZE		1
-+
-+/* Bitfields in FNUM */
-+#define USBA_MICRO_FRAME_NUM_OFFSET		0
-+#define USBA_MICRO_FRAME_NUM_SIZE		3
-+#define USBA_FRAME_NUMBER_OFFSET		3
-+#define USBA_FRAME_NUMBER_SIZE			11
-+#define USBA_FRAME_NUM_ERROR_OFFSET		31
-+#define USBA_FRAME_NUM_ERROR_SIZE		1
-+
-+/* Bitfields in INT_ENB/INT_STA/INT_CLR */
-+#define USBA_HIGH_SPEED_OFFSET			0
-+#define USBA_HIGH_SPEED_SIZE			1
-+#define USBA_DET_SUSPEND_OFFSET			1
-+#define USBA_DET_SUSPEND_SIZE			1
-+#define USBA_MICRO_SOF_OFFSET			2
-+#define USBA_MICRO_SOF_SIZE			1
-+#define USBA_SOF_OFFSET				3
-+#define USBA_SOF_SIZE				1
-+#define USBA_END_OF_RESET_OFFSET		4
-+#define USBA_END_OF_RESET_SIZE			1
-+#define USBA_WAKE_UP_OFFSET			5
-+#define USBA_WAKE_UP_SIZE			1
-+#define USBA_END_OF_RESUME_OFFSET		6
-+#define USBA_END_OF_RESUME_SIZE			1
-+#define USBA_UPSTREAM_RESUME_OFFSET		7
-+#define USBA_UPSTREAM_RESUME_SIZE		1
-+#define USBA_EPT_INT_OFFSET			8
-+#define USBA_EPT_INT_SIZE			16
-+#define USBA_DMA_INT_OFFSET			24
-+#define USBA_DMA_INT_SIZE			8
-+
-+/* Bitfields in EPT_RST */
-+#define USBA_RST_OFFSET				0
-+#define USBA_RST_SIZE				16
-+
-+/* Bitfields in TST_SOF_CNT */
-+#define USBA_SOF_CNT_MAX_OFFSET			0
-+#define USBA_SOF_CNT_MAX_SIZE			7
-+#define USBA_SOF_CNT_LOAD_OFFSET		7
-+#define USBA_SOF_CNT_LOAD_SIZE			1
-+
-+/* Bitfields in TST_CNT_A */
-+#define USBA_CNT_A_MAX_OFFSET			0
-+#define USBA_CNT_A_MAX_SIZE			7
-+#define USBA_CNT_A_LOAD_OFFSET			7
-+#define USBA_CNT_A_LOAD_SIZE			1
-+
-+/* Bitfields in TST_CNT_B */
-+#define USBA_CNT_B_MAX_OFFSET			0
-+#define USBA_CNT_B_MAX_SIZE			7
-+#define USBA_CNT_B_LOAD_OFFSET			7
-+#define USBA_CNT_B_LOAD_SIZE			1
-+
-+/* Bitfields in TST_MODE_REG */
-+#define USBA_TST_MODE_OFFSET			0
-+#define USBA_TST_MODE_SIZE			6
-+
-+/* Bitfields in USBA_TST */
-+#define USBA_SPEED_CFG_OFFSET			0
-+#define USBA_SPEED_CFG_SIZE			2
-+#define USBA_TST_J_MODE_OFFSET			2
-+#define USBA_TST_J_MODE_SIZE			1
-+#define USBA_TST_K_MODE_OFFSET			3
-+#define USBA_TST_K_MODE_SIZE			1
-+#define USBA_TST_PKT_MODE_OFFSET		4
-+#define USBA_TST_PKT_MODE_SIZE			1
-+#define USBA_OPMODE2_OFFSET			5
-+#define USBA_OPMODE2_SIZE			1
-+
-+/* Bitfields in EPT_CFG */
-+#define USBA_EPT_SIZE_OFFSET			0
-+#define USBA_EPT_SIZE_SIZE			3
-+#define USBA_EPT_DIR_OFFSET			3
-+#define USBA_EPT_DIR_SIZE			1
-+#define USBA_EPT_TYPE_OFFSET			4
-+#define USBA_EPT_TYPE_SIZE			2
-+#define USBA_BK_NUMBER_OFFSET			6
-+#define USBA_BK_NUMBER_SIZE			2
-+#define USBA_NB_TRANS_OFFSET			8
-+#define USBA_NB_TRANS_SIZE			2
-+#define USBA_EPT_MAPPED_OFFSET			31
-+#define USBA_EPT_MAPPED_SIZE			1
-+
-+/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
-+#define USBA_EPT_ENABLE_OFFSET			0
-+#define USBA_EPT_ENABLE_SIZE			1
-+#define USBA_AUTO_VALID_OFFSET			1
-+#define USBA_AUTO_VALID_SIZE			1
-+#define USBA_INTDIS_DMA_OFFSET			3
-+#define USBA_INTDIS_DMA_SIZE			1
-+#define USBA_NYET_DIS_OFFSET			4
-+#define USBA_NYET_DIS_SIZE			1
-+#define USBA_DATAX_RX_OFFSET			6
-+#define USBA_DATAX_RX_SIZE			1
-+#define USBA_MDATA_RX_OFFSET			7
-+#define USBA_MDATA_RX_SIZE			1
-+/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
-+#define USBA_BUSY_BANK_IE_OFFSET		18
-+#define USBA_BUSY_BANK_IE_SIZE			1
-+
-+/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
-+#define USBA_FORCE_STALL_OFFSET			5
-+#define USBA_FORCE_STALL_SIZE			1
-+#define USBA_TOGGLE_SEQ_OFFSET			6
-+#define USBA_TOGGLE_SEQ_SIZE			2
-+#define USBA_ERR_OVFLW_OFFSET			8
-+#define USBA_ERR_OVFLW_SIZE			1
-+#define USBA_RX_BK_RDY_OFFSET			9
-+#define USBA_RX_BK_RDY_SIZE			1
-+#define USBA_KILL_BANK_OFFSET			9
-+#define USBA_KILL_BANK_SIZE			1
-+#define USBA_TX_COMPLETE_OFFSET			10
-+#define USBA_TX_COMPLETE_SIZE			1
-+#define USBA_TX_PK_RDY_OFFSET			11
-+#define USBA_TX_PK_RDY_SIZE			1
-+#define USBA_ISO_ERR_TRANS_OFFSET		11
-+#define USBA_ISO_ERR_TRANS_SIZE			1
-+#define USBA_RX_SETUP_OFFSET			12
-+#define USBA_RX_SETUP_SIZE			1
-+#define USBA_ISO_ERR_FLOW_OFFSET		12
-+#define USBA_ISO_ERR_FLOW_SIZE			1
-+#define USBA_STALL_SENT_OFFSET			13
-+#define USBA_STALL_SENT_SIZE			1
-+#define USBA_ISO_ERR_CRC_OFFSET			13
-+#define USBA_ISO_ERR_CRC_SIZE			1
-+#define USBA_ISO_ERR_NBTRANS_OFFSET		13
-+#define USBA_ISO_ERR_NBTRANS_SIZE		1
-+#define USBA_NAK_IN_OFFSET			14
-+#define USBA_NAK_IN_SIZE			1
-+#define USBA_ISO_ERR_FLUSH_OFFSET		14
-+#define USBA_ISO_ERR_FLUSH_SIZE			1
-+#define USBA_NAK_OUT_OFFSET			15
-+#define USBA_NAK_OUT_SIZE			1
-+#define USBA_CURRENT_BANK_OFFSET		16
-+#define USBA_CURRENT_BANK_SIZE			2
-+#define USBA_BUSY_BANKS_OFFSET			18
-+#define USBA_BUSY_BANKS_SIZE			2
-+#define USBA_BYTE_COUNT_OFFSET			20
-+#define USBA_BYTE_COUNT_SIZE			11
-+#define USBA_SHORT_PACKET_OFFSET		31
-+#define USBA_SHORT_PACKET_SIZE			1
-+
-+/* Bitfields in DMA_CONTROL */
-+#define USBA_DMA_CH_EN_OFFSET			0
-+#define USBA_DMA_CH_EN_SIZE			1
-+#define USBA_DMA_LINK_OFFSET			1
-+#define USBA_DMA_LINK_SIZE			1
-+#define USBA_DMA_END_TR_EN_OFFSET		2
-+#define USBA_DMA_END_TR_EN_SIZE			1
-+#define USBA_DMA_END_BUF_EN_OFFSET		3
-+#define USBA_DMA_END_BUF_EN_SIZE		1
-+#define USBA_DMA_END_TR_IE_OFFSET		4
-+#define USBA_DMA_END_TR_IE_SIZE			1
-+#define USBA_DMA_END_BUF_IE_OFFSET		5
-+#define USBA_DMA_END_BUF_IE_SIZE		1
-+#define USBA_DMA_DESC_LOAD_IE_OFFSET		6
-+#define USBA_DMA_DESC_LOAD_IE_SIZE		1
-+#define USBA_DMA_BURST_LOCK_OFFSET		7
-+#define USBA_DMA_BURST_LOCK_SIZE		1
-+#define USBA_DMA_BUF_LEN_OFFSET			16
-+#define USBA_DMA_BUF_LEN_SIZE			16
-+
-+/* Bitfields in DMA_STATUS */
-+#define USBA_DMA_CH_ACTIVE_OFFSET		1
-+#define USBA_DMA_CH_ACTIVE_SIZE			1
-+#define USBA_DMA_END_TR_ST_OFFSET		4
-+#define USBA_DMA_END_TR_ST_SIZE			1
-+#define USBA_DMA_END_BUF_ST_OFFSET		5
-+#define USBA_DMA_END_BUF_ST_SIZE		1
-+#define USBA_DMA_DESC_LOAD_ST_OFFSET		6
-+#define USBA_DMA_DESC_LOAD_ST_SIZE		1
-+
-+/* Constants for SPEED_CFG */
-+#define USBA_SPEED_CFG_NORMAL			0
-+#define USBA_SPEED_CFG_FORCE_HIGH		2
-+#define USBA_SPEED_CFG_FORCE_FULL		3
-+
-+/* Constants for EPT_SIZE */
-+#define USBA_EPT_SIZE_8				0
-+#define USBA_EPT_SIZE_16			1
-+#define USBA_EPT_SIZE_32			2
-+#define USBA_EPT_SIZE_64			3
-+#define USBA_EPT_SIZE_128			4
-+#define USBA_EPT_SIZE_256			5
-+#define USBA_EPT_SIZE_512			6
-+#define USBA_EPT_SIZE_1024			7
-+
-+/* Constants for EPT_TYPE */
-+#define USBA_EPT_TYPE_CONTROL			0
-+#define USBA_EPT_TYPE_ISO			1
-+#define USBA_EPT_TYPE_BULK			2
-+#define USBA_EPT_TYPE_INT			3
-+
-+/* Constants for BK_NUMBER */
-+#define USBA_BK_NUMBER_ZERO			0
-+#define USBA_BK_NUMBER_ONE			1
-+#define USBA_BK_NUMBER_DOUBLE			2
-+#define USBA_BK_NUMBER_TRIPLE			3
-+
-+/* Bit manipulation macros */
-+#define USBA_BIT(name)						\
-+	(1 << USBA_##name##_OFFSET)
-+#define USBA_BF(name, value)					\
-+	(((value) & ((1 << USBA_##name##_SIZE) - 1))		\
-+	 << USBA_##name##_OFFSET)
-+#define USBA_BFEXT(name, value)					\
-+	(((value) >> USBA_##name##_OFFSET)			\
-+	 & ((1 << USBA_##name##_SIZE) - 1))
-+#define USBA_BFINS(name, value, old)				\
-+	(((old) & ~(((1 << USBA_##name##_SIZE) - 1)		\
-+		    << USBA_##name##_OFFSET))			\
-+	 | USBA_BF(name, value))
-+
-+/* Register access macros */
-+#define usba_readl(udc, reg)					\
-+	__raw_readl((udc)->regs + USBA_##reg)
-+#define usba_writel(udc, reg, value)				\
-+	__raw_writel((value), (udc)->regs + USBA_##reg)
-+#define usba_ep_readl(ep, reg)					\
-+	__raw_readl((ep)->ep_regs + USBA_EPT_##reg)
-+#define usba_ep_writel(ep, reg, value)				\
-+	__raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
-+#define usba_dma_readl(ep, reg)					\
-+	__raw_readl((ep)->dma_regs + USBA_DMA_##reg)
-+#define usba_dma_writel(ep, reg, value)				\
-+	__raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
-+
-+/* Calculate base address for a given endpoint or DMA controller */
-+#define USBA_EPT_BASE(x)	(0x100 + (x) * 0x20)
-+#define USBA_DMA_BASE(x)	(0x300 + (x) * 0x10)
-+#define USBA_FIFO_BASE(x)	((x) << 16)
-+
-+/* Synth parameters */
-+#define USBA_NR_ENDPOINTS	7
-+
-+#define EP0_FIFO_SIZE		64
-+#define EP0_EPT_SIZE		USBA_EPT_SIZE_64
-+#define EP0_NR_BANKS		1
-+#define BULK_FIFO_SIZE		512
-+#define BULK_EPT_SIZE		USBA_EPT_SIZE_512
-+#define BULK_NR_BANKS		2
-+#define ISO_FIFO_SIZE		1024
-+#define ISO_EPT_SIZE		USBA_EPT_SIZE_1024
-+#define ISO_NR_BANKS		3
-+#define INT_FIFO_SIZE		64
-+#define INT_EPT_SIZE		USBA_EPT_SIZE_64
-+#define INT_NR_BANKS		3
-+
-+enum usba_ctrl_state {
-+	WAIT_FOR_SETUP,
-+	DATA_STAGE_IN,
-+	DATA_STAGE_OUT,
-+	STATUS_STAGE_IN,
-+	STATUS_STAGE_OUT,
-+	STATUS_STAGE_ADDR,
-+	STATUS_STAGE_TEST,
-+};
-+/*
-+  EP_STATE_IDLE,
-+  EP_STATE_SETUP,
-+  EP_STATE_IN_DATA,
-+  EP_STATE_OUT_DATA,
-+  EP_STATE_SET_ADDR_STATUS,
-+  EP_STATE_RX_STATUS,
-+  EP_STATE_TX_STATUS,
-+  EP_STATE_HALT,
-+*/
-+
-+struct usba_dma_desc {
-+	dma_addr_t next;
-+	dma_addr_t addr;
-+	u32 ctrl;
-+};
-+
-+struct usba_ep {
-+	int					state;
-+	void __iomem				*ep_regs;
-+	void __iomem				*dma_regs;
-+	void __iomem				*fifo;
-+	struct usb_ep				ep;
-+	struct usba_udc				*udc;
-+
-+	struct list_head			queue;
-+	const struct usb_endpoint_descriptor	*desc;
-+
-+	u16					fifo_size;
-+	u8					nr_banks;
-+	u8					index;
-+	unsigned int				can_dma:1;
-+	unsigned int				can_isoc:1;
-+	unsigned int				is_isoc:1;
-+	unsigned int				is_in:1;
-+
-+#ifdef CONFIG_DEBUG_FS
-+	u32					last_dma_status;
-+	struct dentry				*debugfs_dir;
-+	struct dentry				*debugfs_queue;
-+	struct dentry				*debugfs_dma_status;
-+	struct dentry				*debugfs_state;
-+#endif
-+};
-+
-+struct usba_request {
-+	struct usb_request			req;
-+	struct list_head			queue;
-+
-+	u32					ctrl;
-+
-+	unsigned int				submitted:1;
-+	unsigned int				last_transaction:1;
-+	unsigned int				using_dma:1;
-+	unsigned int				mapped:1;
-+};
-+
-+struct usba_udc {
-+	/* Protect hw registers from concurrent modifications */
-+	spinlock_t lock;
-+
-+	void __iomem *regs;
-+	void __iomem *fifo;
-+
-+	struct usb_gadget gadget;
-+	struct usb_gadget_driver *driver;
-+	struct platform_device *pdev;
-+	int irq;
-+	int vbus_pin;
-+	struct clk *pclk;
-+	struct clk *hclk;
-+
-+	int test_mode;
-+	int vbus_prev;
-+
-+#ifdef CONFIG_DEBUG_FS
-+	struct dentry *debugfs_root;
-+	struct dentry *debugfs_regs;
-+#endif
-+};
-+
-+#define to_usba_ep(x) container_of((x), struct usba_ep, ep)
-+#define to_usba_req(x) container_of((x), struct usba_request, req)
-+#define to_usba_udc(x) container_of((x), struct usba_udc, gadget)
-+
-+#define ep_index(ep)		((ep)->index)
-+#define ep_can_dma(ep)		((ep)->can_dma)
-+#define ep_is_in(ep)		((ep)->is_in)
-+#define ep_is_isochronous(ep)	((ep)->is_isoc)
-+#define ep_is_control(ep)	(ep_index(ep) == 0)
-+#define ep_name(ep)		((ep)->ep.name)
-+#define ep_is_idle(ep)		((ep)->state == EP_STATE_IDLE)
-+
-+#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
-diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
-index 325bf7c..23e874b 100644
---- a/drivers/usb/gadget/ether.c
-+++ b/drivers/usb/gadget/ether.c
-@@ -277,7 +277,7 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
- #define DEV_CONFIG_CDC
- #endif
- 
--#ifdef CONFIG_USB_GADGET_HUSB2DEV
-+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- #define DEV_CONFIG_CDC
- #endif
- 
-diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
-index d041b91..96e4dbc 100644
---- a/drivers/usb/gadget/gadget_chips.h
-+++ b/drivers/usb/gadget/gadget_chips.h
-@@ -75,10 +75,10 @@
- #define	gadget_is_pxa27x(g)	0
- #endif
- 
--#ifdef CONFIG_USB_GADGET_HUSB2DEV
--#define gadget_is_husb2dev(g)	!strcmp("husb2_udc", (g)->name)
-+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
-+#define gadget_is_atmel_usba(g)	!strcmp("atmel_usba_udc", (g)->name)
- #else
--#define gadget_is_husb2dev(g)	0
-+#define gadget_is_atmel_usba(g)	0
- #endif
- 
- #ifdef CONFIG_USB_GADGET_S3C2410
-@@ -181,7 +181,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
- 		return 0x16;
- 	else if (gadget_is_mpc8272(gadget))
- 		return 0x17;
--	else if (gadget_is_husb2dev(gadget))
-+	else if (gadget_is_atmel_usba(gadget))
- 		return 0x18;
- 	else if (gadget_is_fsl_usb2(gadget))
- 		return 0x19;
-diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
-index 46d0e52..855f8cc 100644
---- a/drivers/usb/gadget/inode.c
-+++ b/drivers/usb/gadget/inode.c
-@@ -37,7 +37,7 @@
- #include <linux/device.h>
- #include <linux/moduleparam.h>
- 
--#include <linux/usb_gadgetfs.h>
-+#include <linux/usb/gadgetfs.h>
- #include <linux/usb_gadget.h>
- 
- 
-diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
-index 403dac7..f3e2897 100644
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -849,6 +849,16 @@ config FB_INTSRAM
- 	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
- 	  to let frame buffer in external SDRAM.
- 
-+config FB_ATMEL_STN
-+	bool "Use a STN display with AT91/AT32 LCD Controller"
-+	depends on FB_ATMEL && ARCH_AT91SAM9261
-+	default n
-+	help
-+	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
-+	  Controller. Say N if you want to connect a TFT.
-+
-+	  If unsure, say N.
-+
- config FB_NVIDIA
- 	tristate "nVidia Framebuffer Support"
- 	depends on FB && PCI
-diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
-index e1d5bd0..bb361ab 100644
---- a/drivers/video/atmel_lcdfb.c
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -37,7 +37,9 @@
- #endif
- 
- #if defined(CONFIG_ARCH_AT91)
--#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
-+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
-+					 | FBINFO_PARTIAL_PAN_OK \
-+					 | FBINFO_HWACCEL_YPAN)
- 
- static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
- 					struct fb_var_screeninfo *var)
-@@ -74,11 +76,34 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
- 	.type		= FB_TYPE_PACKED_PIXELS,
- 	.visual		= FB_VISUAL_TRUECOLOR,
- 	.xpanstep	= 0,
--	.ypanstep	= 0,
-+	.ypanstep	= 1,
- 	.ywrapstep	= 0,
- 	.accel		= FB_ACCEL_NONE,
- };
- 
-+static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
-+{
-+	unsigned long value;
-+
-+	if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
-+		return xres;
-+
-+	value = xres;
-+	if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
-+		/* STN display */
-+		if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
-+			value *= 3;
-+		}
-+		if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
-+		   || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
-+		      && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
-+			value = DIV_ROUND_UP(value, 4);
-+		else
-+			value = DIV_ROUND_UP(value, 8);
-+	}
-+
-+	return value;
-+}
- 
- static void atmel_lcdfb_update_dma(struct fb_info *info,
- 			       struct fb_var_screeninfo *var)
-@@ -181,6 +206,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
- 	var->xoffset = var->yoffset = 0;
- 
- 	switch (var->bits_per_pixel) {
-+	case 1:
- 	case 2:
- 	case 4:
- 	case 8:
-@@ -195,8 +221,11 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
- 		var->blue.offset = 10;
- 		var->red.length = var->green.length = var->blue.length = 5;
- 		break;
--	case 24:
- 	case 32:
-+		var->transp.offset = 24;
-+		var->transp.length = 8;
-+		/* fall through */
-+	case 24:
- 		var->red.offset = 0;
- 		var->green.offset = 8;
- 		var->blue.offset = 16;
-@@ -228,8 +257,10 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
- static int atmel_lcdfb_set_par(struct fb_info *info)
- {
- 	struct atmel_lcdfb_info *sinfo = info->par;
-+	unsigned long hozval_linesz;
- 	unsigned long value;
- 	unsigned long clk_value_khz;
-+	unsigned long bits_per_line;
- 
- 	dev_dbg(info->device, "%s:\n", __func__);
- 	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
-@@ -241,12 +272,15 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
- 
- 	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
- 
--	if (info->var.bits_per_pixel <= 8)
-+	if (info->var.bits_per_pixel == 1)
-+		info->fix.visual = FB_VISUAL_MONO01;
-+	else if (info->var.bits_per_pixel <= 8)
- 		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
- 	else
- 		info->fix.visual = FB_VISUAL_TRUECOLOR;
- 
--	info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
-+	bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
-+	info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
- 
- 	/* Re-initialize the DMA engine... */
- 	dev_dbg(info->device, "  * update DMA engine\n");
-@@ -262,18 +296,21 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
- 	/* Set pixel clock */
- 	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
- 
--	value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
--
--	if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
--		value++;
-+	value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
- 
- 	value = (value / 2) - 1;
-+	dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n", value);
- 
- 	if (value <= 0) {
- 		dev_notice(info->device, "Bypassing pixel clock divider\n");
- 		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
--	} else
-+	} else {
- 		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
-+		info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
-+		dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
-+					PICOS2KHZ(info->var.pixclock));
-+	}
-+
- 
- 	/* Initialize control register 2 */
- 	value = sinfo->default_lcdcon2;
-@@ -311,9 +348,14 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
- 	dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
- 	lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
- 
-+	/* Horizontal value (aka line size) */
-+	hozval_linesz = compute_hozval(info->var.xres,
-+					lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
-+
- 	/* Display size */
--	value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
-+	value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
- 	value |= info->var.yres - 1;
-+	dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
- 	lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
- 
- 	/* FIFO Threshold: Use formula from data sheet */
-@@ -421,6 +463,15 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
- 			ret = 0;
- 		}
- 		break;
-+
-+	case FB_VISUAL_MONO01:
-+		if (regno < 2) {
-+			val = (regno == 0) ? 0x00 : 0x1F;
-+			lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
-+			ret = 0;
-+		}
-+		break;
-+
- 	}
- 
- 	return ret;
-diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
-index fbef663..b6f936a 100644
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -8,26 +8,44 @@ menuconfig BACKLIGHT_LCD_SUPPORT
- 	  Enable this to be able to choose the drivers for controlling the
- 	  backlight and the LCD panel on some platforms, for example on PDAs.
- 
--config BACKLIGHT_CLASS_DEVICE
--        tristate "Lowlevel Backlight controls"
-+#
-+# LCD
-+#
-+config LCD_CLASS_DEVICE
-+        tristate "Lowlevel LCD controls"
- 	depends on BACKLIGHT_LCD_SUPPORT
- 	default m
- 	help
--	  This framework adds support for low-level control of the LCD
--          backlight. This includes support for brightness and power.
-+	  This framework adds support for low-level control of LCD.
-+	  Some framebuffer devices connect to platform-specific LCD modules
-+	  in order to have a platform-specific way to control the flat panel
-+	  (contrast and applying power to the LCD (not to the backlight!)).
- 
- 	  To have support for your specific LCD panel you will have to
- 	  select the proper drivers which depend on this option.
- 
--config LCD_CLASS_DEVICE
--        tristate "Lowlevel LCD controls"
-+config LCD_LTV350QV
-+	tristate "Samsung LTV350QV LCD Panel"
-+	depends on LCD_CLASS_DEVICE && SPI_MASTER
-+	default n
-+	help
-+	  If you have a Samsung LTV350QV LCD panel, say y to include a
-+	  power control driver for it.  The panel starts up in power
-+	  off state, so you need this driver in order to see any
-+	  output.
-+
-+	  The LTV350QV panel is present on all ATSTK1000 boards.
-+
-+#
-+# Backlight
-+#
-+config BACKLIGHT_CLASS_DEVICE
-+        tristate "Lowlevel Backlight controls"
- 	depends on BACKLIGHT_LCD_SUPPORT
- 	default m
- 	help
--	  This framework adds support for low-level control of LCD.
--	  Some framebuffer devices connect to platform-specific LCD modules
--	  in order to have a platform-specific way to control the flat panel
--	  (contrast and applying power to the LCD (not to the backlight!)).
-+	  This framework adds support for low-level control of the LCD
-+          backlight. This includes support for brightness and power.
- 
- 	  To have support for your specific LCD panel you will have to
- 	  select the proper drivers which depend on this option.
-diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
-index c6e2266..965a78b 100644
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -1,6 +1,8 @@
- # Backlight & LCD drivers
- 
- obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
-+obj-$(CONFIG_LCD_LTV350QV)	+= ltv350qv.o
-+
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
-diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
-new file mode 100644
-index 0000000..342b97a
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.c
-@@ -0,0 +1,340 @@
-+/*
-+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/lcd.h>
-+#include <linux/module.h>
-+#include <linux/spi/spi.h>
-+
-+#include "ltv350qv.h"
-+
-+#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
-+
-+struct ltv350qv {
-+	struct spi_device	*spi;
-+	u8			*buffer;
-+	int			power;
-+	struct lcd_device	*ld;
-+};
-+
-+/*
-+ * The power-on and power-off sequences are taken from the
-+ * LTV350QV-F04 data sheet from Samsung. The register definitions are
-+ * taken from the S6F2002 command list also from Samsung. Both
-+ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
-+ *
-+ * There's still some voodoo going on here, but it's a lot better than
-+ * in the first incarnation of the driver where all we had was the raw
-+ * numbers from the initialization sequence.
-+ */
-+static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
-+{
-+	struct spi_message msg;
-+	struct spi_transfer index_xfer = {
-+		.len		= 3,
-+		.cs_change	= 1,
-+	};
-+	struct spi_transfer value_xfer = {
-+		.len		= 3,
-+		.cs_change	= 1,
-+	};
-+
-+	spi_message_init(&msg);
-+
-+	/* register index */
-+	lcd->buffer[0] = LTV_OPC_INDEX;
-+	lcd->buffer[1] = 0x00;
-+	lcd->buffer[2] = reg & 0x7f;
-+	index_xfer.tx_buf = lcd->buffer;
-+	spi_message_add_tail(&index_xfer, &msg);
-+
-+	/* register value */
-+	lcd->buffer[4] = LTV_OPC_DATA;
-+	lcd->buffer[5] = val >> 8;
-+	lcd->buffer[6] = val;
-+	value_xfer.tx_buf = lcd->buffer + 4;
-+	spi_message_add_tail(&value_xfer, &msg);
-+
-+	return spi_sync(lcd->spi, &msg);
-+}
-+
-+/* The comments are taken straight from the data sheet */
-+static int ltv350qv_power_on(struct ltv350qv *lcd)
-+{
-+	int ret;
-+
-+	/* Power On Reset Display off State */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
-+		goto err;
-+	msleep(15);
-+
-+	/* Power Setting Function 1 */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
-+		goto err;
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
-+		goto err_power1;
-+
-+	/* Power Setting Function 2 */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+			       LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+			       | LTV_SUPPLY_CURRENT(5)))
-+		goto err_power2;
-+
-+	msleep(55);
-+
-+	/* Instruction Setting */
-+	ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
-+				 LTV_NMD | LTV_REV | LTV_NL(0x1d));
-+	ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
-+				  LTV_DS_SAME | LTV_CHS_480
-+				  | LTV_DF_RGB | LTV_RGB_BGR);
-+	ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
-+				  LTV_VSPL_ACTIVE_LOW
-+				  | LTV_HSPL_ACTIVE_LOW
-+				  | LTV_DPL_SAMPLE_RISING
-+				  | LTV_EPL_ACTIVE_LOW
-+				  | LTV_SS_RIGHT_TO_LEFT);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_FWI(3));
-+	ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
-+	ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
-+	ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
-+	if (ret)
-+		goto err_settings;
-+
-+	/* Wait more than 2 frames */
-+	msleep(20);
-+
-+	/* Display On Sequence */
-+	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+				 LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
-+				 | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
-+				 | LTV_SUPPLY_CURRENT(5));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
-+	if (ret)
-+		goto err_disp_on;
-+
-+	/* Display should now be ON. Phew. */
-+	return 0;
-+
-+err_disp_on:
-+	/*
-+	 * Try to recover. Error handling probably isn't very useful
-+	 * at this point, just make a best effort to switch the panel
-+	 * off.
-+	 */
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+			   LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+			   | LTV_SUPPLY_CURRENT(5));
-+	ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+			   LTV_NW_INV_1LINE | LTV_FWI(3));
-+err_settings:
-+err_power2:
-+err_power1:
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+	msleep(1);
-+err:
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+	return -EIO;
-+}
-+
-+static int ltv350qv_power_off(struct ltv350qv *lcd)
-+{
-+	int ret;
-+
-+	/* Display Off Sequence */
-+	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+				 LTV_VCOM_DISABLE
-+				 | LTV_DRIVE_CURRENT(5)
-+				 | LTV_SUPPLY_CURRENT(5));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_FWI(3));
-+
-+	/* Power down setting 1 */
-+	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+
-+	/* Wait at least 1 ms */
-+	msleep(1);
-+
-+	/* Power down setting 2 */
-+	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+
-+	/*
-+	 * No point in trying to recover here. If we can't switch the
-+	 * panel off, what are we supposed to do other than inform the
-+	 * user about the failure?
-+	 */
-+	if (ret)
-+		return -EIO;
-+
-+	/* Display power should now be OFF */
-+	return 0;
-+}
-+
-+static int ltv350qv_power(struct ltv350qv *lcd, int power)
-+{
-+	int ret = 0;
-+
-+	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
-+		ret = ltv350qv_power_on(lcd);
-+	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
-+		ret = ltv350qv_power_off(lcd);
-+
-+	if (!ret)
-+		lcd->power = power;
-+
-+	return ret;
-+}
-+
-+static int ltv350qv_set_power(struct lcd_device *ld, int power)
-+{
-+	struct ltv350qv *lcd;
-+
-+	lcd = class_get_devdata(&ld->class_dev);
-+	return ltv350qv_power(lcd, power);
-+}
-+
-+static int ltv350qv_get_power(struct lcd_device *ld)
-+{
-+	struct ltv350qv *lcd;
-+
-+	lcd = class_get_devdata(&ld->class_dev);
-+	return lcd->power;
-+}
-+
-+static struct lcd_ops ltv_ops = {
-+	.get_power	= ltv350qv_get_power,
-+	.set_power	= ltv350qv_set_power,
-+};
-+
-+static int __devinit ltv350qv_probe(struct spi_device *spi)
-+{
-+	struct ltv350qv *lcd;
-+	struct lcd_device *ld;
-+	int ret;
-+
-+	lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
-+	if (!lcd)
-+		return -ENOMEM;
-+
-+	lcd->spi = spi;
-+	lcd->power = FB_BLANK_POWERDOWN;
-+	lcd->buffer = kzalloc(8, GFP_KERNEL);
-+
-+	ld = lcd_device_register("ltv350qv", lcd, &ltv_ops);
-+	if (IS_ERR(ld)) {
-+		ret = PTR_ERR(ld);
-+		goto out_free_lcd;
-+	}
-+	lcd->ld = ld;
-+
-+	ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+	if (ret)
-+		goto out_unregister;
-+
-+	dev_set_drvdata(&spi->dev, lcd);
-+
-+	return 0;
-+
-+out_unregister:
-+	lcd_device_unregister(ld);
-+out_free_lcd:
-+	kfree(lcd);
-+	return ret;
-+}
-+
-+static int __devexit ltv350qv_remove(struct spi_device *spi)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+	lcd_device_unregister(lcd->ld);
-+	kfree(lcd);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int ltv350qv_suspend(struct spi_device *spi,
-+			    pm_message_t state, u32 level)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	if (level == SUSPEND_POWER_DOWN)
-+		return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+
-+	return 0;
-+}
-+
-+static int ltv350qv_resume(struct spi_device *spi, u32 level)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	if (level == RESUME_POWER_ON)
-+		return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+
-+	return 0;
-+}
-+#else
-+#define ltv350qv_suspend	NULL
-+#define ltv350qv_resume		NULL
-+#endif
-+
-+/* Power down all displays on reboot, poweroff or halt */
-+static void ltv350qv_shutdown(struct spi_device *spi)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+}
-+
-+static struct spi_driver ltv350qv_driver = {
-+	.driver = {
-+		.name		= "ltv350qv",
-+		.bus		= &spi_bus_type,
-+		.owner		= THIS_MODULE,
-+	},
-+
-+	.probe		= ltv350qv_probe,
-+	.remove		= __devexit_p(ltv350qv_remove),
-+	.shutdown	= ltv350qv_shutdown,
-+	.suspend	= ltv350qv_suspend,
-+	.resume		= ltv350qv_resume,
-+};
-+
-+static int __init ltv350qv_init(void)
-+{
-+	return spi_register_driver(&ltv350qv_driver);
-+}
-+
-+static void __exit ltv350qv_exit(void)
-+{
-+	spi_unregister_driver(&ltv350qv_driver);
-+}
-+module_init(ltv350qv_init);
-+module_exit(ltv350qv_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
-new file mode 100644
-index 0000000..189112e
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.h
-@@ -0,0 +1,95 @@
-+/*
-+ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LTV350QV_H
-+#define __LTV350QV_H
-+
-+#define LTV_OPC_INDEX	0x74
-+#define LTV_OPC_DATA	0x76
-+
-+#define LTV_ID		0x00		/* ID Read */
-+#define LTV_IFCTL	0x01		/* Display Interface Control */
-+#define LTV_DATACTL	0x02		/* Display Data Control */
-+#define LTV_ENTRY_MODE	0x03		/* Entry Mode */
-+#define LTV_GATECTL1	0x04		/* Gate Control 1 */
-+#define LTV_GATECTL2	0x05		/* Gate Control 2 */
-+#define LTV_VBP		0x06		/* Vertical Back Porch */
-+#define LTV_HBP		0x07		/* Horizontal Back Porch */
-+#define LTV_SOTCTL	0x08		/* Source Output Timing Control */
-+#define LTV_PWRCTL1	0x09		/* Power Control 1 */
-+#define LTV_PWRCTL2	0x0a		/* Power Control 2 */
-+#define LTV_GAMMA(x)	(0x10 + (x))	/* Gamma control */
-+
-+/* Bit definitions for LTV_IFCTL */
-+#define LTV_IM			(1 << 15)
-+#define LTV_NMD			(1 << 14)
-+#define LTV_SSMD		(1 << 13)
-+#define LTV_REV			(1 <<  7)
-+#define LTV_NL(x)		(((x) & 0x001f) << 0)
-+
-+/* Bit definitions for LTV_DATACTL */
-+#define LTV_DS_SAME		(0 << 12)
-+#define LTV_DS_D_TO_S		(1 << 12)
-+#define LTV_DS_S_TO_D		(2 << 12)
-+#define LTV_CHS_384		(0 <<  9)
-+#define LTV_CHS_480		(1 <<  9)
-+#define LTV_CHS_492		(2 <<  9)
-+#define LTV_DF_RGB		(0 <<  6)
-+#define LTV_DF_RGBX		(1 <<  6)
-+#define LTV_DF_XRGB		(2 <<  6)
-+#define LTV_RGB_RGB		(0 <<  2)
-+#define LTV_RGB_BGR		(1 <<  2)
-+#define LTV_RGB_GRB		(2 <<  2)
-+#define LTV_RGB_RBG		(3 <<  2)
-+
-+/* Bit definitions for LTV_ENTRY_MODE */
-+#define LTV_VSPL_ACTIVE_LOW	(0 << 15)
-+#define LTV_VSPL_ACTIVE_HIGH	(1 << 15)
-+#define LTV_HSPL_ACTIVE_LOW	(0 << 14)
-+#define LTV_HSPL_ACTIVE_HIGH	(1 << 14)
-+#define LTV_DPL_SAMPLE_RISING	(0 << 13)
-+#define LTV_DPL_SAMPLE_FALLING	(1 << 13)
-+#define LTV_EPL_ACTIVE_LOW	(0 << 12)
-+#define LTV_EPL_ACTIVE_HIGH	(1 << 12)
-+#define LTV_SS_LEFT_TO_RIGHT	(0 <<  8)
-+#define LTV_SS_RIGHT_TO_LEFT	(1 <<  8)
-+#define LTV_STB			(1 <<  1)
-+
-+/* Bit definitions for LTV_GATECTL1 */
-+#define LTV_CLW(x)		(((x) & 0x0007) << 12)
-+#define LTV_GAON		(1 <<  5)
-+#define LTV_SDR			(1 <<  3)
-+
-+/* Bit definitions for LTV_GATECTL2 */
-+#define LTV_NW_INV_FRAME	(0 << 14)
-+#define LTV_NW_INV_1LINE	(1 << 14)
-+#define LTV_NW_INV_2LINE	(2 << 14)
-+#define LTV_DSC			(1 << 12)
-+#define LTV_GIF			(1 <<  8)
-+#define LTV_FHN			(1 <<  7)
-+#define LTV_FTI(x)		(((x) & 0x0003) << 4)
-+#define LTV_FWI(x)		(((x) & 0x0003) << 0)
-+
-+/* Bit definitions for LTV_SOTCTL */
-+#define LTV_SDT(x)		(((x) & 0x0007) << 10)
-+#define LTV_EQ(x)		(((x) & 0x0007) <<  2)
-+
-+/* Bit definitions for LTV_PWRCTL1 */
-+#define LTV_VCOM_DISABLE	(1 << 14)
-+#define LTV_VCOMOUT_ENABLE	(1 << 11)
-+#define LTV_POWER_ON		(1 <<  9)
-+#define LTV_DRIVE_CURRENT(x)	(((x) & 0x0007) << 4)	/* 0=off, 5=max */
-+#define LTV_SUPPLY_CURRENT(x)	(((x) & 0x0007) << 0)	/* 0=off, 5=max */
-+
-+/* Bit definitions for LTV_PWRCTL2 */
-+#define LTV_VCOML_ENABLE	(1 << 13)
-+#define LTV_VCOML_VOLTAGE(x)	(((x) & 0x001f) << 8)	/* 0=1V, 31=-1V */
-+#define LTV_VCOMH_VOLTAGE(x)	(((x) & 0x001f) << 0)	/* 0=3V, 31=4.5V */
-+
-+#endif /* __LTV350QV_H */
-diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
-index 0ce6ee9..d96b10f 100644
---- a/include/asm-arm/arch-at91/board.h
-+++ b/include/asm-arm/arch-at91/board.h
-@@ -64,6 +64,7 @@ extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
- 
-  /* Ethernet (EMAC & MACB) */
- struct at91_eth_data {
-+	u32		phy_mask;
- 	u8		phy_irq_pin;	/* PHY IRQ */
- 	u8		is_rmii;	/* using RMII interface? */
- };
-diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
-index 9fd2e32..9b36eb8 100644
---- a/include/asm-avr32/arch-at32ap/board.h
-+++ b/include/asm-avr32/arch-at32ap/board.h
-@@ -6,6 +6,8 @@
- 
- #include <linux/types.h>
- 
-+#define GPIO_PIN_NONE	(-1)
-+
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
- 
-@@ -21,6 +23,7 @@ void at32_map_usart(unsigned int hw_id, unsigned int line);
- struct platform_device *at32_add_device_usart(unsigned int id);
- 
- struct eth_platform_data {
-+	u32	phy_mask;
- 	u8	is_rmii;
- };
- struct platform_device *
-@@ -30,9 +33,41 @@ struct spi_board_info;
- struct platform_device *
- at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
- 
-+struct platform_device *at32_add_device_twi(unsigned int id);
-+
-+struct mci_platform_data {
-+	int detect_pin;
-+	int wp_pin;
-+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-+
-+struct usba_platform_data {
-+	int vbus_pin;
-+};
-+struct platform_device *
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
-+
- struct atmel_lcdfb_info;
- struct platform_device *
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- 		     unsigned long fbmem_start, unsigned long fbmem_len);
- 
-+struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct platform_device *at32_add_device_abdac(unsigned int id);
-+
-+/* depending on what's hooked up, not all SSC pins will be used */
-+#define	ATMEL_SSC_TK		0x01
-+#define	ATMEL_SSC_TF		0x02
-+#define	ATMEL_SSC_TD		0x04
-+#define	ATMEL_SSC_TX		(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-+
-+#define	ATMEL_SSC_RK		0x10
-+#define	ATMEL_SSC_RF		0x20
-+#define	ATMEL_SSC_RD		0x40
-+#define	ATMEL_SSC_RX		(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-+
-+struct platform_device *
-+at32_add_device_ssc(unsigned int id, unsigned int flags);
-+
- #endif /* __ASM_ARCH_BOARD_H */
-diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
-index 9930871..0f95567 100644
---- a/include/asm-avr32/arch-at32ap/portmux.h
-+++ b/include/asm-avr32/arch-at32ap/portmux.h
-@@ -25,4 +25,16 @@ void at32_select_periph(unsigned int pin, unsigned int periph,
- void at32_select_gpio(unsigned int pin, unsigned long flags);
- void at32_reserve_pin(unsigned int pin);
- 
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port);
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
-+void at32_deselect_pins(unsigned int port, u32 pins);
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
- #endif /* __ASM_ARCH_PORTMUX_H__ */
-diff --git a/include/asm-avr32/arch-at32ap/sm.h b/include/asm-avr32/arch-at32ap/sm.h
-deleted file mode 100644
-index 265a9ea..0000000
---- a/include/asm-avr32/arch-at32ap/sm.h
-+++ /dev/null
-@@ -1,27 +0,0 @@
--/*
-- * AT32 System Manager interface.
-- *
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--#ifndef __ASM_AVR32_AT32_SM_H__
--#define __ASM_AVR32_AT32_SM_H__
--
--struct irq_chip;
--struct platform_device;
--
--struct at32_sm {
--	spinlock_t lock;
--	void __iomem *regs;
--	struct irq_chip *eim_chip;
--	unsigned int eim_first_irq;
--	struct platform_device *pdev;
--};
--
--extern struct platform_device at32_sm_device;
--extern struct at32_sm system_manager;
--
--#endif /* __ASM_AVR32_AT32_SM_H__ */
-diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h
-index b9c2548..7ef3862 100644
---- a/include/asm-avr32/atomic.h
-+++ b/include/asm-avr32/atomic.h
-@@ -101,7 +101,7 @@ static inline int atomic_sub_unless(atomic_t *v, int a, int u)
- 		"	mov	%1, 1\n"
- 		"1:"
- 		: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
--		: "m"(v->counter), "rKs21"(a), "rKs21"(u)
-+		: "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result)
- 		: "cc", "memory");
- 
- 	return result;
-@@ -137,7 +137,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
- 			"	mov	%1, 1\n"
- 			"1:"
- 			: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
--			: "m"(v->counter), "r"(a), "ir"(u)
-+			: "m"(v->counter), "r"(a), "ir"(u), "1"(result)
- 			: "cc", "memory");
- 	}
- 
-diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
-new file mode 100644
-index 0000000..56a4965
---- /dev/null
-+++ b/include/asm-avr32/dma-controller.h
-@@ -0,0 +1,166 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
-+
-+#include <linux/device.h>
-+
-+#define DMA_DIR_MEM_TO_MEM		0x0000
-+#define DMA_DIR_MEM_TO_PERIPH		0x0001
-+#define DMA_DIR_PERIPH_TO_MEM		0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH	0x0003
-+
-+#define DMA_WIDTH_8BIT			0
-+#define DMA_WIDTH_16BIT			1
-+#define DMA_WIDTH_32BIT			2
-+
-+struct dma_request {
-+	struct dma_controller *dmac;
-+	struct list_head list;
-+
-+	unsigned short channel;
-+
-+	void (*xfer_complete)(struct dma_request *req);
-+	void (*block_complete)(struct dma_request *req);
-+	void (*error)(struct dma_request *req);
-+};
-+
-+struct dma_request_sg {
-+	struct dma_request req;
-+
-+	int nr_sg;
-+	struct scatterlist *sg;
-+	unsigned long block_size;
-+	unsigned int nr_blocks;
-+
-+	dma_addr_t data_reg;
-+	unsigned short periph_id;
-+
-+	unsigned char direction;
-+	unsigned char width;
-+};
-+#define to_dma_request_sg(_req)				\
-+	container_of(_req, struct dma_request_sg, req)
-+
-+struct dma_request_cyclic {
-+	struct dma_request req;
-+
-+        int periods;
-+	unsigned long buffer_size;
-+
-+        dma_addr_t buffer_start;
-+	dma_addr_t data_reg;
-+
-+	unsigned short periph_id;
-+	unsigned char direction;
-+	unsigned char width;
-+
-+        void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req)				\
-+	container_of(_req, struct dma_request_cyclic, req)
-+
-+struct dma_request_memcpy {
-+	struct dma_request req;
-+
-+	dma_addr_t src_addr;
-+	unsigned int src_width;
-+	unsigned int src_stride;
-+
-+	dma_addr_t dst_addr;
-+	unsigned int dst_width;
-+	unsigned int dst_stride;
-+
-+	size_t length;
-+
-+	unsigned short src_reverse:1;
-+	unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req)				\
-+	container_of(_req, struct dma_request_memcpy, req)
-+
-+struct dma_controller {
-+	struct list_head list;
-+	int id;
-+	struct device *dev;
-+
-+	int (*alloc_channel)(struct dma_controller *dmac);
-+	void (*release_channel)(struct dma_controller *dmac,
-+				int channel);
-+	int (*prepare_request_sg)(struct dma_controller *dmac,
-+				  struct dma_request_sg *req);
-+        int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+				      struct dma_request_cyclic *req);
-+	int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+				      struct dma_request_memcpy *req);
-+	int (*start_request)(struct dma_controller *dmac,
-+			     unsigned int channel);
-+	int (*stop_request)(struct dma_controller *dmac,
-+                            unsigned int channel);
-+        dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+                                      unsigned int channel);
-+};
-+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+	return dmac->alloc_channel(dmac);
-+}
-+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
-+{
-+	dmac->release_channel(dmac, chan);
-+}
-+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+		       struct dma_request_sg *req)
-+{
-+	return dmac->prepare_request_sg(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+			   struct dma_request_cyclic *req)
-+{
-+	return dmac->prepare_request_cyclic(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+			   struct dma_request_memcpy *req)
-+{
-+	return dmac->prepare_request_memcpy(dmac, req);
-+}
-+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+		  unsigned int channel)
-+{
-+	return dmac->start_request(dmac, channel);
-+}
-+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+                 unsigned int channel)
-+{
-+	return dmac->stop_request(dmac, channel);
-+}
-+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+                    unsigned int channel)
-+{
-+	return dmac->get_current_pos(dmac, channel);
-+}
-+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
-+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff --git a/include/asm-avr32/unaligned.h b/include/asm-avr32/unaligned.h
-index 3042723..36f5fd4 100644
---- a/include/asm-avr32/unaligned.h
-+++ b/include/asm-avr32/unaligned.h
-@@ -7,19 +7,10 @@
-  * words, but halfwords must be halfword-aligned, and doublewords must
-  * be word-aligned.
-  *
-- * TODO: Make all this CPU-specific and optimize.
-+ * However, swapped word loads must be word-aligned so we can't
-+ * optimize word loads in general.
-  */
- 
--#include <linux/string.h>
--
--/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
--
--#define get_unaligned(ptr) \
--  ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
--
--#define put_unaligned(val, ptr)				\
--  ({ __typeof__(*(ptr)) __tmp = (val);			\
--     memmove((ptr), &__tmp, sizeof(*(ptr)));		\
--     (void)0; })
-+#include <asm-generic/unaligned.h>
- 
- #endif /* __ASM_AVR32_UNALIGNED_H */
-diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
-new file mode 100644
-index 0000000..0602339
---- /dev/null
-+++ b/include/linux/atmel-ssc.h
-@@ -0,0 +1,312 @@
-+#ifndef __INCLUDE_ATMEL_SSC_H
-+#define __INCLUDE_ATMEL_SSC_H
-+
-+#include <linux/platform_device.h>
-+#include <linux/list.h>
-+
-+struct ssc_device {
-+	struct list_head	list;
-+	void __iomem		*regs;
-+	struct platform_device	*pdev;
-+	struct clk		*clk;
-+	int			user;
-+	int			irq;
-+};
-+
-+struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
-+void ssc_free(struct ssc_device *ssc);
-+
-+/* SSC register offsets */
-+
-+/* SSC Control Register */
-+#define SSC_CR				0x00000000
-+#define SSC_CR_RXDIS_SIZE			 1
-+#define SSC_CR_RXDIS_OFFSET			 1
-+#define SSC_CR_RXEN_SIZE			 1
-+#define SSC_CR_RXEN_OFFSET			 0
-+#define SSC_CR_SWRST_SIZE			 1
-+#define SSC_CR_SWRST_OFFSET			15
-+#define SSC_CR_TXDIS_SIZE			 1
-+#define SSC_CR_TXDIS_OFFSET			 9
-+#define SSC_CR_TXEN_SIZE			 1
-+#define SSC_CR_TXEN_OFFSET			 8
-+
-+/* SSC Clock Mode Register */
-+#define SSC_CMR				0x00000004
-+#define SSC_CMR_DIV_SIZE			12
-+#define SSC_CMR_DIV_OFFSET			 0
-+
-+/* SSC Receive Clock Mode Register */
-+#define SSC_RCMR			0x00000010
-+#define SSC_RCMR_CKG_SIZE			 2
-+#define SSC_RCMR_CKG_OFFSET			 6
-+#define SSC_RCMR_CKI_SIZE			 1
-+#define SSC_RCMR_CKI_OFFSET			 5
-+#define SSC_RCMR_CKO_SIZE			 3
-+#define SSC_RCMR_CKO_OFFSET			 2
-+#define SSC_RCMR_CKS_SIZE			 2
-+#define SSC_RCMR_CKS_OFFSET			 0
-+#define SSC_RCMR_PERIOD_SIZE			 8
-+#define SSC_RCMR_PERIOD_OFFSET			24
-+#define SSC_RCMR_START_SIZE			 4
-+#define SSC_RCMR_START_OFFSET			 8
-+#define SSC_RCMR_STOP_SIZE			 1
-+#define SSC_RCMR_STOP_OFFSET			12
-+#define SSC_RCMR_STTDLY_SIZE			 8
-+#define SSC_RCMR_STTDLY_OFFSET			16
-+
-+/* SSC Receive Frame Mode Register */
-+#define SSC_RFMR			0x00000014
-+#define SSC_RFMR_DATLEN_SIZE			 5
-+#define SSC_RFMR_DATLEN_OFFSET			 0
-+#define SSC_RFMR_DATNB_SIZE			 4
-+#define SSC_RFMR_DATNB_OFFSET			 8
-+#define SSC_RFMR_FSEDGE_SIZE			 1
-+#define SSC_RFMR_FSEDGE_OFFSET			24
-+#define SSC_RFMR_FSLEN_SIZE			 4
-+#define SSC_RFMR_FSLEN_OFFSET			16
-+#define SSC_RFMR_FSOS_SIZE			 4
-+#define SSC_RFMR_FSOS_OFFSET			20
-+#define SSC_RFMR_LOOP_SIZE			 1
-+#define SSC_RFMR_LOOP_OFFSET			 5
-+#define SSC_RFMR_MSBF_SIZE			 1
-+#define SSC_RFMR_MSBF_OFFSET			 7
-+
-+/* SSC Transmit Clock Mode Register */
-+#define SSC_TCMR			0x00000018
-+#define SSC_TCMR_CKG_SIZE			 2
-+#define SSC_TCMR_CKG_OFFSET			 6
-+#define SSC_TCMR_CKI_SIZE			 1
-+#define SSC_TCMR_CKI_OFFSET			 5
-+#define SSC_TCMR_CKO_SIZE			 3
-+#define SSC_TCMR_CKO_OFFSET			 2
-+#define SSC_TCMR_CKS_SIZE			 2
-+#define SSC_TCMR_CKS_OFFSET			 0
-+#define SSC_TCMR_PERIOD_SIZE			 8
-+#define SSC_TCMR_PERIOD_OFFSET			24
-+#define SSC_TCMR_START_SIZE			 4
-+#define SSC_TCMR_START_OFFSET			 8
-+#define SSC_TCMR_STTDLY_SIZE			 8
-+#define SSC_TCMR_STTDLY_OFFSET			16
-+
-+/* SSC Transmit Frame Mode Register */
-+#define SSC_TFMR			0x0000001c
-+#define SSC_TFMR_DATDEF_SIZE			 1
-+#define SSC_TFMR_DATDEF_OFFSET			 5
-+#define SSC_TFMR_DATLEN_SIZE			 5
-+#define SSC_TFMR_DATLEN_OFFSET			 0
-+#define SSC_TFMR_DATNB_SIZE			 4
-+#define SSC_TFMR_DATNB_OFFSET			 8
-+#define SSC_TFMR_FSDEN_SIZE			 1
-+#define SSC_TFMR_FSDEN_OFFSET			23
-+#define SSC_TFMR_FSEDGE_SIZE			 1
-+#define SSC_TFMR_FSEDGE_OFFSET			24
-+#define SSC_TFMR_FSLEN_SIZE			 4
-+#define SSC_TFMR_FSLEN_OFFSET			16
-+#define SSC_TFMR_FSOS_SIZE			 3
-+#define SSC_TFMR_FSOS_OFFSET			20
-+#define SSC_TFMR_MSBF_SIZE			 1
-+#define SSC_TFMR_MSBF_OFFSET			 7
-+
-+/* SSC Receive Hold Register */
-+#define SSC_RHR				0x00000020
-+#define SSC_RHR_RDAT_SIZE			32
-+#define SSC_RHR_RDAT_OFFSET			 0
-+
-+/* SSC Transmit Hold Register */
-+#define SSC_THR				0x00000024
-+#define SSC_THR_TDAT_SIZE			32
-+#define SSC_THR_TDAT_OFFSET			 0
-+
-+/* SSC Receive Sync. Holding Register */
-+#define SSC_RSHR			0x00000030
-+#define SSC_RSHR_RSDAT_SIZE			16
-+#define SSC_RSHR_RSDAT_OFFSET			 0
-+
-+/* SSC Transmit Sync. Holding Register */
-+#define SSC_TSHR			0x00000034
-+#define SSC_TSHR_TSDAT_SIZE			16
-+#define SSC_TSHR_RSDAT_OFFSET			 0
-+
-+/* SSC Receive Compare 0 Register */
-+#define SSC_RC0R			0x00000038
-+#define SSC_RC0R_CP0_SIZE			16
-+#define SSC_RC0R_CP0_OFFSET			 0
-+
-+/* SSC Receive Compare 1 Register */
-+#define SSC_RC1R			0x0000003c
-+#define SSC_RC1R_CP1_SIZE			16
-+#define SSC_RC1R_CP1_OFFSET			 0
-+
-+/* SSC Status Register */
-+#define SSC_SR				0x00000040
-+#define SSC_SR_CP0_SIZE				 1
-+#define SSC_SR_CP0_OFFSET			 8
-+#define SSC_SR_CP1_SIZE				 1
-+#define SSC_SR_CP1_OFFSET			 9
-+#define SSC_SR_ENDRX_SIZE			 1
-+#define SSC_SR_ENDRX_OFFSET			 6
-+#define SSC_SR_ENDTX_SIZE			 1
-+#define SSC_SR_ENDTX_OFFSET			 2
-+#define SSC_SR_OVRUN_SIZE			 1
-+#define SSC_SR_OVRUN_OFFSET			 5
-+#define SSC_SR_RXBUFF_SIZE			 1
-+#define SSC_SR_RXBUFF_OFFSET			 7
-+#define SSC_SR_RXEN_SIZE			 1
-+#define SSC_SR_RXEN_OFFSET			17
-+#define SSC_SR_RXRDY_SIZE			 1
-+#define SSC_SR_RXRDY_OFFSET			 4
-+#define SSC_SR_RXSYN_SIZE			 1
-+#define SSC_SR_RXSYN_OFFSET			11
-+#define SSC_SR_TXBUFE_SIZE			 1
-+#define SSC_SR_TXBUFE_OFFSET			 3
-+#define SSC_SR_TXEMPTY_SIZE			 1
-+#define SSC_SR_TXEMPTY_OFFSET			 1
-+#define SSC_SR_TXEN_SIZE			 1
-+#define SSC_SR_TXEN_OFFSET			16
-+#define SSC_SR_TXRDY_SIZE			 1
-+#define SSC_SR_TXRDY_OFFSET			 0
-+#define SSC_SR_TXSYN_SIZE			 1
-+#define SSC_SR_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Enable Register */
-+#define SSC_IER				0x00000044
-+#define SSC_IER_CP0_SIZE			 1
-+#define SSC_IER_CP0_OFFSET			 8
-+#define SSC_IER_CP1_SIZE			 1
-+#define SSC_IER_CP1_OFFSET			 9
-+#define SSC_IER_ENDRX_SIZE			 1
-+#define SSC_IER_ENDRX_OFFSET			 6
-+#define SSC_IER_ENDTX_SIZE			 1
-+#define SSC_IER_ENDTX_OFFSET			 2
-+#define SSC_IER_OVRUN_SIZE			 1
-+#define SSC_IER_OVRUN_OFFSET			 5
-+#define SSC_IER_RXBUFF_SIZE			 1
-+#define SSC_IER_RXBUFF_OFFSET			 7
-+#define SSC_IER_RXRDY_SIZE			 1
-+#define SSC_IER_RXRDY_OFFSET			 4
-+#define SSC_IER_RXSYN_SIZE			 1
-+#define SSC_IER_RXSYN_OFFSET			11
-+#define SSC_IER_TXBUFE_SIZE			 1
-+#define SSC_IER_TXBUFE_OFFSET			 3
-+#define SSC_IER_TXEMPTY_SIZE			 1
-+#define SSC_IER_TXEMPTY_OFFSET			 1
-+#define SSC_IER_TXRDY_SIZE			 1
-+#define SSC_IER_TXRDY_OFFSET			 0
-+#define SSC_IER_TXSYN_SIZE			 1
-+#define SSC_IER_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Disable Register */
-+#define SSC_IDR				0x00000048
-+#define SSC_IDR_CP0_SIZE			 1
-+#define SSC_IDR_CP0_OFFSET			 8
-+#define SSC_IDR_CP1_SIZE			 1
-+#define SSC_IDR_CP1_OFFSET			 9
-+#define SSC_IDR_ENDRX_SIZE			 1
-+#define SSC_IDR_ENDRX_OFFSET			 6
-+#define SSC_IDR_ENDTX_SIZE			 1
-+#define SSC_IDR_ENDTX_OFFSET			 2
-+#define SSC_IDR_OVRUN_SIZE			 1
-+#define SSC_IDR_OVRUN_OFFSET			 5
-+#define SSC_IDR_RXBUFF_SIZE			 1
-+#define SSC_IDR_RXBUFF_OFFSET			 7
-+#define SSC_IDR_RXRDY_SIZE			 1
-+#define SSC_IDR_RXRDY_OFFSET			 4
-+#define SSC_IDR_RXSYN_SIZE			 1
-+#define SSC_IDR_RXSYN_OFFSET			11
-+#define SSC_IDR_TXBUFE_SIZE			 1
-+#define SSC_IDR_TXBUFE_OFFSET			 3
-+#define SSC_IDR_TXEMPTY_SIZE			 1
-+#define SSC_IDR_TXEMPTY_OFFSET			 1
-+#define SSC_IDR_TXRDY_SIZE			 1
-+#define SSC_IDR_TXRDY_OFFSET			 0
-+#define SSC_IDR_TXSYN_SIZE			 1
-+#define SSC_IDR_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Mask Register */
-+#define SSC_IMR				0x0000004c
-+#define SSC_IMR_CP0_SIZE			 1
-+#define SSC_IMR_CP0_OFFSET			 8
-+#define SSC_IMR_CP1_SIZE			 1
-+#define SSC_IMR_CP1_OFFSET			 9
-+#define SSC_IMR_ENDRX_SIZE			 1
-+#define SSC_IMR_ENDRX_OFFSET			 6
-+#define SSC_IMR_ENDTX_SIZE			 1
-+#define SSC_IMR_ENDTX_OFFSET			 2
-+#define SSC_IMR_OVRUN_SIZE			 1
-+#define SSC_IMR_OVRUN_OFFSET			 5
-+#define SSC_IMR_RXBUFF_SIZE			 1
-+#define SSC_IMR_RXBUFF_OFFSET			 7
-+#define SSC_IMR_RXRDY_SIZE			 1
-+#define SSC_IMR_RXRDY_OFFSET			 4
-+#define SSC_IMR_RXSYN_SIZE			 1
-+#define SSC_IMR_RXSYN_OFFSET			11
-+#define SSC_IMR_TXBUFE_SIZE			 1
-+#define SSC_IMR_TXBUFE_OFFSET			 3
-+#define SSC_IMR_TXEMPTY_SIZE			 1
-+#define SSC_IMR_TXEMPTY_OFFSET			 1
-+#define SSC_IMR_TXRDY_SIZE			 1
-+#define SSC_IMR_TXRDY_OFFSET			 0
-+#define SSC_IMR_TXSYN_SIZE			 1
-+#define SSC_IMR_TXSYN_OFFSET			10
-+
-+/* SSC PDC Receive Pointer Register */
-+#define SSC_PDC_RPR			0x00000100
-+
-+/* SSC PDC Receive Counter Register */
-+#define SSC_PDC_RCR			0x00000104
-+
-+/* SSC PDC Transmit Pointer Register */
-+#define SSC_PDC_TPR			0x00000108
-+
-+/* SSC PDC Receive Next Pointer Register */
-+#define SSC_PDC_RNPR			0x00000110
-+
-+/* SSC PDC Receive Next Counter Register */
-+#define SSC_PDC_RNCR			0x00000114
-+
-+/* SSC PDC Transmit Counter Register */
-+#define SSC_PDC_TCR			0x0000010c
-+
-+/* SSC PDC Transmit Next Pointer Register */
-+#define SSC_PDC_TNPR			0x00000118
-+
-+/* SSC PDC Transmit Next Counter Register */
-+#define SSC_PDC_TNCR			0x0000011c
-+
-+/* SSC PDC Transfer Control Register */
-+#define SSC_PDC_PTCR			0x00000120
-+#define SSC_PDC_PTCR_RXTDIS_SIZE		 1
-+#define SSC_PDC_PTCR_RXTDIS_OFFSET		 1
-+#define SSC_PDC_PTCR_RXTEN_SIZE			 1
-+#define SSC_PDC_PTCR_RXTEN_OFFSET		 0
-+#define SSC_PDC_PTCR_TXTDIS_SIZE		 1
-+#define SSC_PDC_PTCR_TXTDIS_OFFSET		 9
-+#define SSC_PDC_PTCR_TXTEN_SIZE			 1
-+#define SSC_PDC_PTCR_TXTEN_OFFSET		 8
-+
-+/* SSC PDC Transfer Status Register */
-+#define SSC_PDC_PTSR			0x00000124
-+#define SSC_PDC_PTSR_RXTEN_SIZE			 1
-+#define SSC_PDC_PTSR_RXTEN_OFFSET		 0
-+#define SSC_PDC_PTSR_TXTEN_SIZE			 1
-+#define SSC_PDC_PTSR_TXTEN_OFFSET		 8
-+
-+/* Bit manipulation macros */
-+#define SSC_BIT(name)					\
-+	(1 << SSC_##name##_OFFSET)
-+#define SSC_BF(name, value)				\
-+	(((value) & ((1 << SSC_##name##_SIZE) - 1))	\
-+	 << SSC_##name##_OFFSET)
-+#define SSC_BFEXT(name, value)				\
-+	(((value) >> SSC_##name##_OFFSET)		\
-+	 & ((1 << SSC_##name##_SIZE) - 1))
-+#define SSC_BFINS(name, value, old)			\
-+	(((old) & ~(((1 << SSC_##name##_SIZE) - 1)	\
-+	<< SSC_##name##_OFFSET)) | SSC_BF(name, value))
-+
-+/* Register access macros */
-+#define ssc_readl(base, reg)		__raw_readl(base + SSC_##reg)
-+#define ssc_writel(base, reg, value)	__raw_writel((value), base + SSC_##reg)
-+
-+#endif /* __INCLUDE_ATMEL_SSC_H */
-diff --git a/include/linux/gpio_mouse.h b/include/linux/gpio_mouse.h
-new file mode 100644
-index 0000000..44ed7aa
---- /dev/null
-+++ b/include/linux/gpio_mouse.h
-@@ -0,0 +1,61 @@
-+/*
-+ * Driver for simulating a mouse on GPIO lines.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GPIO_MOUSE_H
-+#define _GPIO_MOUSE_H
-+
-+#define GPIO_MOUSE_POLARITY_ACT_HIGH	0x00
-+#define GPIO_MOUSE_POLARITY_ACT_LOW	0x01
-+
-+#define GPIO_MOUSE_PIN_UP	0
-+#define GPIO_MOUSE_PIN_DOWN	1
-+#define GPIO_MOUSE_PIN_LEFT	2
-+#define GPIO_MOUSE_PIN_RIGHT	3
-+#define GPIO_MOUSE_PIN_BLEFT	4
-+#define GPIO_MOUSE_PIN_BMIDDLE	5
-+#define GPIO_MOUSE_PIN_BRIGHT	6
-+#define GPIO_MOUSE_PIN_MAX	7
-+
-+/**
-+ * struct gpio_mouse_platform_data
-+ * @scan_ms: integer in ms specifying the scan periode.
-+ * @polarity: Pin polarity, active high or low.
-+ * @up: GPIO line for up value.
-+ * @down: GPIO line for down value.
-+ * @left: GPIO line for left value.
-+ * @right: GPIO line for right value.
-+ * @bleft: GPIO line for left button.
-+ * @bmiddle: GPIO line for middle button.
-+ * @bright: GPIO line for right button.
-+ *
-+ * This struct must be added to the platform_device in the board code.
-+ * It is used by the gpio_mouse driver to setup GPIO lines and to
-+ * calculate mouse movement.
-+ */
-+struct gpio_mouse_platform_data {
-+	int scan_ms;
-+	int polarity;
-+
-+	union {
-+		struct {
-+			int up;
-+			int down;
-+			int left;
-+			int right;
-+
-+			int bleft;
-+			int bmiddle;
-+			int bright;
-+		};
-+		int pins[GPIO_MOUSE_PIN_MAX];
-+	};
-+};
-+
-+#endif /* _GPIO_MOUSE_H */
-diff --git a/include/linux/leds.h b/include/linux/leds.h
-index 88afcef..059abfe 100644
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -110,4 +110,18 @@ extern void ledtrig_ide_activity(void);
- #define ledtrig_ide_activity() do {} while(0)
- #endif
- 
-+/* For the leds-gpio driver */
-+struct gpio_led {
-+	const char *name;
-+	char *default_trigger;
-+	unsigned 	gpio;
-+	u8 		active_low;
-+};
-+
-+struct gpio_led_platform_data {
-+	int 		num_leds;
-+	struct gpio_led *leds;
-+};
-+
-+
- #endif		/* __LINUX_LEDS_H_INCLUDED */
-diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
-new file mode 100644
-index 0000000..0f20a70
---- /dev/null
-+++ b/include/linux/spi/at73c213.h
-@@ -0,0 +1,25 @@
-+/*
-+ * Board-specific data used to set up AT73c213 audio DAC driver.
-+ */
-+
-+#ifndef __LINUX_SPI_AT73C213_H
-+#define __LINUX_SPI_AT73C213_H
-+
-+/**
-+ * at73c213_board_info - how the external DAC is wired to the device.
-+ *
-+ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
-+ * @dac_clk: the external clock used to provide master clock to the DAC.
-+ * @shortname: a short discription for the DAC, seen by userspace tools.
-+ *
-+ * This struct contains the configuration of the hardware connection to the
-+ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
-+ * provides a name which is used to identify it in userspace tools.
-+ */
-+struct at73c213_board_info {
-+	int		ssc_id;
-+	struct clk	*dac_clk;
-+	char		shortname[32];
-+};
-+
-+#endif /* __LINUX_SPI_AT73C213_H */
-diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
-index 43f160c..6ce42bf 100644
---- a/include/linux/usb/Kbuild
-+++ b/include/linux/usb/Kbuild
-@@ -1,5 +1,6 @@
- unifdef-y += audio.h
- unifdef-y += cdc.h
- unifdef-y += ch9.h
-+unifdef-y += gadgetfs.h
- unifdef-y += midi.h
- 
-diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h
-new file mode 100644
-index 0000000..e8654c3
---- /dev/null
-+++ b/include/linux/usb/gadgetfs.h
-@@ -0,0 +1,81 @@
-+#ifndef __LINUX_USB_GADGETFS_H
-+#define __LINUX_USB_GADGETFS_H
-+
-+#include <asm/types.h>
-+#include <asm/ioctl.h>
-+
-+#include <linux/usb/ch9.h>
-+
-+/*
-+ * Filesystem based user-mode API to USB Gadget controller hardware
-+ *
-+ * Other than ep0 operations, most things are done by read() and write()
-+ * on endpoint files found in one directory.  They are configured by
-+ * writing descriptors, and then may be used for normal stream style
-+ * i/o requests.  When ep0 is configured, the device can enumerate;
-+ * when it's closed, the device disconnects from usb.  Operations on
-+ * ep0 require ioctl() operations.
-+ *
-+ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
-+ * which may then be used to read usb_gadgetfs_event structs.  The driver
-+ * may activate endpoints as it handles SET_CONFIGURATION setup events,
-+ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
-+ * then performing data transfers by reading or writing.
-+ */
-+
-+/*
-+ * Events are delivered on the ep0 file descriptor, when the user mode driver
-+ * reads from this file descriptor after writing the descriptors.  Don't
-+ * stop polling this descriptor.
-+ */
-+
-+enum usb_gadgetfs_event_type {
-+	GADGETFS_NOP = 0,
-+
-+	GADGETFS_CONNECT,
-+	GADGETFS_DISCONNECT,
-+	GADGETFS_SETUP,
-+	GADGETFS_SUSPEND,
-+	// and likely more !
-+};
-+
-+/* NOTE:  this structure must stay the same size and layout on
-+ * both 32-bit and 64-bit kernels.
-+ */
-+struct usb_gadgetfs_event {
-+	union {
-+		// NOP, DISCONNECT, SUSPEND: nothing
-+		// ... some hardware can't report disconnection
-+
-+		// CONNECT: just the speed
-+		enum usb_device_speed	speed;
-+
-+		// SETUP: packet; DATA phase i/o precedes next event
-+		// (setup.bmRequestType & USB_DIR_IN) flags direction
-+		// ... includes SET_CONFIGURATION, SET_INTERFACE
-+		struct usb_ctrlrequest	setup;
-+	} u;
-+	enum usb_gadgetfs_event_type	type;
-+};
-+
-+
-+/* endpoint ioctls */
-+
-+/* IN transfers may be reported to the gadget driver as complete
-+ *	when the fifo is loaded, before the host reads the data;
-+ * OUT transfers may be reported to the host's "client" driver as
-+ *	complete when they're sitting in the FIFO unread.
-+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
-+ * (needed for precise fault handling, when the hardware allows it)
-+ */
-+#define	GADGETFS_FIFO_STATUS	_IO('g',1)
-+
-+/* discards any unclaimed data in the fifo. */
-+#define	GADGETFS_FIFO_FLUSH	_IO('g',2)
-+
-+/* resets endpoint halt+toggle; used to implement set_interface.
-+ * some hardware (like pxa2xx) can't support this.
-+ */
-+#define	GADGETFS_CLEAR_HALT	_IO('g',3)
-+
-+#endif /* __LINUX_USB_GADGETFS_H */
-diff --git a/include/linux/usb_gadgetfs.h b/include/linux/usb_gadgetfs.h
-deleted file mode 100644
-index 8086d5a..0000000
---- a/include/linux/usb_gadgetfs.h
-+++ /dev/null
-@@ -1,75 +0,0 @@
--
--#include <asm/types.h>
--#include <asm/ioctl.h>
--
--#include <linux/usb/ch9.h>
--
--/*
-- * Filesystem based user-mode API to USB Gadget controller hardware
-- *
-- * Almost everything can be done with only read and write operations,
-- * on endpoint files found in one directory.  They are configured by
-- * writing descriptors, and then may be used for normal stream style
-- * i/o requests.  When ep0 is configured, the device can enumerate;
-- * when it's closed, the device disconnects from usb.
-- *
-- * Configuration and device descriptors get written to /dev/gadget/$CHIP,
-- * which may then be used to read usb_gadgetfs_event structs.  The driver
-- * may activate endpoints as it handles SET_CONFIGURATION setup events,
-- * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
-- * then performing data transfers by reading or writing.
-- */
--
--/*
-- * Events are delivered on the ep0 file descriptor, if the user mode driver
-- * reads from this file descriptor after writing the descriptors.  Don't
-- * stop polling this descriptor, if you write that kind of driver.
-- */
--
--enum usb_gadgetfs_event_type {
--	GADGETFS_NOP = 0,
--
--	GADGETFS_CONNECT,
--	GADGETFS_DISCONNECT,
--	GADGETFS_SETUP,
--	GADGETFS_SUSPEND,
--	// and likely more !
--};
--
--struct usb_gadgetfs_event {
--	enum usb_gadgetfs_event_type	type;
--	union {
--		// NOP, DISCONNECT, SUSPEND: nothing
--		// ... some hardware can't report disconnection
--
--		// CONNECT: just the speed
--		enum usb_device_speed	speed;
--
--		// SETUP: packet; DATA phase i/o precedes next event
--		// (setup.bmRequestType & USB_DIR_IN) flags direction 
--		// ... includes SET_CONFIGURATION, SET_INTERFACE
--		struct usb_ctrlrequest	setup;
--	} u;
--};
--
--
--/* endpoint ioctls */
--
--/* IN transfers may be reported to the gadget driver as complete
-- * 	when the fifo is loaded, before the host reads the data;
-- * OUT transfers may be reported to the host's "client" driver as
-- * 	complete when they're sitting in the FIFO unread.
-- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
-- * (needed for precise fault handling, when the hardware allows it)
-- */
--#define	GADGETFS_FIFO_STATUS	_IO('g',1)
--
--/* discards any unclaimed data in the fifo. */
--#define	GADGETFS_FIFO_FLUSH	_IO('g',2)
--
--/* resets endpoint halt+toggle; used to implement set_interface.
-- * some hardware (like pxa2xx) can't support this.
-- */
--#define	GADGETFS_CLEAR_HALT	_IO('g',3)
--
--
-diff --git a/init/do_mounts.c b/init/do_mounts.c
-index 46fe407..efc134c 100644
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -25,6 +25,7 @@ int __initdata rd_doload;	/* 1 = load RAM disk, 0 = don't load */
- int root_mountflags = MS_RDONLY | MS_SILENT;
- char * __initdata root_device_name;
- static char __initdata saved_root_name[64];
-+int __initdata root_wait;
- 
- dev_t ROOT_DEV;
- 
-@@ -216,6 +217,14 @@ static int __init root_dev_setup(char *line)
- 
- __setup("root=", root_dev_setup);
- 
-+static int __init rootwait_setup(char *line)
-+{
-+	root_wait = simple_strtol(line,NULL,0);
-+	return 1;
-+}
-+
-+__setup("rootwait=", rootwait_setup);
-+
- static char * __initdata root_mount_data;
- static int __init root_data_setup(char *str)
- {
-@@ -438,11 +447,24 @@ void __init prepare_namespace(void)
- 			root_device_name += 5;
- 	}
- 
--	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
--
- 	if (initrd_load())
- 		goto out;
- 
-+	/* wait for any asynchronous scanning to complete */
-+	if ((ROOT_DEV == 0) && root_wait) {
-+		printk(KERN_INFO "Waiting for root device %s...\n",
-+			saved_root_name);
-+		do {
-+			while (driver_probe_done() != 0)
-+				msleep(100);
-+			ROOT_DEV = name_to_dev_t(saved_root_name);
-+			if (ROOT_DEV == 0)
-+				msleep(100);
-+		} while (ROOT_DEV == 0);
-+	}
-+
-+	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
-+
- 	if (is_floppy && rd_doload && rd_load_disk(0))
- 		ROOT_DEV = Root_RAM0;
- 
-diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
-index f7844f6..6631586 100755
---- a/scripts/checkstack.pl
-+++ b/scripts/checkstack.pl
-@@ -12,6 +12,7 @@
- #	sh64 port by Paul Mundt
- #	Random bits by Matt Mackall <mpm@selenic.com>
- #	M68k port by Geert Uytterhoeven and Andreas Schwab
-+#	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
- #
- #	Usage:
- #	objdump -d vmlinux | stackcheck.pl [arch]
-@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
- 	if ($arch eq 'arm') {
- 		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
- 		$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
-+	} elsif ($arch eq 'avr32') {
-+		#8000008a:       20 1d           sub sp,4
-+		#80000ca8:       fa cd 05 b0     sub sp,sp,1456
-+		$re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
- 	} elsif ($arch =~ /^i[3456]86$/) {
- 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
- 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
-diff --git a/sound/Kconfig b/sound/Kconfig
-index 9ea4738..9217739 100644
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -63,9 +63,13 @@ source "sound/aoa/Kconfig"
- 
- source "sound/arm/Kconfig"
- 
-+if SPI
-+source "sound/spi/Kconfig"
-+endif
-+
- source "sound/mips/Kconfig"
- 
--# the following will depend on the order of config.
-+# tee following will depend on the order of config.
- # here assuming USB is defined before ALSA
- source "sound/usb/Kconfig"
- 
-diff --git a/sound/Makefile b/sound/Makefile
-index b7c7fb7..581ea5e 100644
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
- obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
--obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
-+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
-+		      sparc/ spi/ parisc/ pcmcia/ mips/ soc/
- obj-$(CONFIG_SND_AOA) += aoa/
- 
- # This one must be compilable even if sound is configured out
-diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
-new file mode 100644
-index 0000000..0d08c29
---- /dev/null
-+++ b/sound/spi/Kconfig
-@@ -0,0 +1,31 @@
-+#SPI drivers
-+
-+menu "SPI devices"
-+	depends on SND != n
-+
-+config SND_AT73C213
-+	tristate "Atmel AT73C213 DAC driver"
-+	depends on ATMEL_SSC
-+	select SND_PCM
-+	help
-+	  Say Y here if you want to use the Atmel AT73C213 external DAC. This
-+	  DAC can be found on Atmel development boards.
-+
-+	  This driver requires the Atmel SSC driver for sound sink, a
-+	  peripheral found on most AT91 and AVR32 microprocessors.
-+
-+	  To compile this driver as a module, choose M here: the module will be
-+	  called snd-at73c213.
-+
-+config SND_AT73C213_TARGET_BITRATE
-+	int "Target bitrate for AT73C213"
-+	depends on SND_AT73C213
-+	default "48000"
-+	range 8000 50000
-+	help
-+	  Sets the target bitrate for the bitrate calculator in the driver.
-+	  Limited by hardware to be between 8000 Hz and 50000 Hz.
-+
-+	  Set to 48000 Hz by default.
-+
-+endmenu
-diff --git a/sound/spi/Makefile b/sound/spi/Makefile
-new file mode 100644
-index 0000000..026fb73
---- /dev/null
-+++ b/sound/spi/Makefile
-@@ -0,0 +1,5 @@
-+# Makefile for SPI drivers
-+
-+snd-at73c213-objs		:= at73c213.o
-+
-+obj-$(CONFIG_SND_AT73C213)	+= snd-at73c213.o
-diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
-new file mode 100644
-index 0000000..f514f47
---- /dev/null
-+++ b/sound/spi/at73c213.c
-@@ -0,0 +1,1121 @@
-+/*
-+ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
-+ *
-+ * Copyright (C) 2006-2007 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+
-+/*#define DEBUG*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+
-+#include <sound/driver.h>
-+#include <sound/initval.h>
-+#include <sound/control.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+
-+#include <linux/atmel-ssc.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+
-+#include "at73c213.h"
-+
-+#define BITRATE_MIN	 8000 /* Hardware limit? */
-+#define BITRATE_TARGET	CONFIG_SND_AT73C213_TARGET_BITRATE
-+#define BITRATE_MAX	50000 /* Hardware limit. */
-+
-+/* Initial (hardware reset) AT73C213 register values. */
-+static u8 snd_at73c213_original_image[18] =
-+{
-+	0x00,	/* 00 - CTRL    */
-+	0x05,	/* 01 - LLIG    */
-+	0x05,	/* 02 - RLIG    */
-+	0x08,	/* 03 - LPMG    */
-+	0x08,	/* 04 - RPMG    */
-+	0x00,	/* 05 - LLOG    */
-+	0x00,	/* 06 - RLOG    */
-+	0x22,	/* 07 - OLC     */
-+	0x09,	/* 08 - MC      */
-+	0x00,	/* 09 - CSFC    */
-+	0x00,	/* 0A - MISC    */
-+	0x00,	/* 0B -         */
-+	0x00,	/* 0C - PRECH   */
-+	0x05,	/* 0D - AUXG    */
-+	0x00,	/* 0E -         */
-+	0x00,	/* 0F -         */
-+	0x00,	/* 10 - RST     */
-+	0x00,	/* 11 - PA_CTRL */
-+};
-+
-+struct snd_at73c213 {
-+	struct snd_card			*card;
-+	struct snd_pcm			*pcm;
-+	struct snd_pcm_substream	*substream;
-+	struct at73c213_board_info	*board;
-+	int				irq;
-+	int				period;
-+	unsigned long			bitrate;
-+	struct clk			*bitclk;
-+	struct ssc_device		*ssc;
-+	struct spi_device		*spi;
-+	u8				spi_wbuffer[2];
-+	u8				spi_rbuffer[2];
-+	/* Image of the SPI registers in AT73C213. */
-+	u8				reg_image[18];
-+	/* Protect registers against concurrent access. */
-+	spinlock_t			lock;
-+};
-+
-+#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
-+
-+static int
-+snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
-+{
-+	struct spi_message msg;
-+	struct spi_transfer msg_xfer = {
-+		.len		= 2,
-+		.cs_change	= 0,
-+	};
-+	int retval;
-+
-+	spi_message_init(&msg);
-+
-+	chip->spi_wbuffer[0] = reg;
-+	chip->spi_wbuffer[1] = val;
-+
-+	msg_xfer.tx_buf = chip->spi_wbuffer;
-+	msg_xfer.rx_buf = chip->spi_rbuffer;
-+	spi_message_add_tail(&msg_xfer, &msg);
-+
-+	retval = spi_sync(chip->spi, &msg);
-+
-+	if (!retval)
-+		chip->reg_image[reg] = val;
-+
-+	return retval;
-+}
-+
-+static struct snd_pcm_hardware snd_at73c213_playback_hw = {
-+	.info		= SNDRV_PCM_INFO_INTERLEAVED |
-+			  SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+	.formats	= SNDRV_PCM_FMTBIT_S16_BE,
-+	.rates		= SNDRV_PCM_RATE_CONTINUOUS,
-+	.rate_min	= 8000,  /* Replaced by chip->bitrate later. */
-+	.rate_max	= 50000, /* Replaced by chip->bitrate later. */
-+	.channels_min	= 2,
-+	.channels_max	= 2,
-+	.buffer_bytes_max = 64 * 1024 - 1,
-+	.period_bytes_min = 512,
-+	.period_bytes_max = 64 * 1024 - 1,
-+	.periods_min	= 4,
-+	.periods_max	= 1024,
-+};
-+
-+/*
-+ * Calculate and set bitrate and divisions.
-+ */
-+static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
-+{
-+	unsigned long ssc_rate = clk_get_rate(chip->ssc->clk);
-+	unsigned long dac_rate_new, ssc_div, status;
-+	unsigned long ssc_div_max, ssc_div_min;
-+	int max_tries;
-+
-+	/*
-+	 * We connect two clocks here, picking divisors so the I2S clocks
-+	 * out data at the same rate the DAC clocks it in ... and as close
-+	 * as practical to the desired target rate.
-+	 *
-+	 * The DAC master clock (MCLK) is programmable, and is either 256
-+	 * or (not here) 384 times the I2S output clock (BCLK).
-+	 */
-+
-+	/* SSC clock / (bitrate * stereo * 16-bit). */
-+	ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
-+	ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
-+	ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
-+	max_tries = (ssc_div_max - ssc_div_min) / 2;
-+
-+	if (max_tries < 1)
-+		max_tries = 1;
-+
-+	/* ssc_div must be a power of 2. */
-+	ssc_div = (ssc_div + 1) & ~1UL;
-+
-+	if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
-+		ssc_div -= 2;
-+		if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX)
-+			return -ENXIO;
-+	}
-+
-+	/* Search for a possible bitrate. */
-+	do {
-+		/* SSC clock / (ssc divider * 16-bit * stereo). */
-+		if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
-+			return -ENXIO;
-+
-+		/* 256 / (2 * 16) = 8 */
-+		dac_rate_new = 8 * (ssc_rate / ssc_div);
-+
-+		status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
-+		if (status < 0)
-+			return status;
-+
-+		/* Ignore difference smaller than 256 Hz. */
-+		if ((status/256) == (dac_rate_new/256))
-+			goto set_rate;
-+
-+		ssc_div += 2;
-+	} while (--max_tries);
-+
-+	/* Not able to find a valid bitrate. */
-+	return -ENXIO;
-+
-+set_rate:
-+	status = clk_set_rate(chip->board->dac_clk, status);
-+	if (status < 0)
-+		return status;
-+
-+	/* Set divider in SSC device. */
-+	ssc_writel(chip->ssc->regs, CMR, ssc_div/2);
-+
-+	/* SSC clock / (ssc divider * 16-bit * stereo). */
-+	chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
-+
-+	dev_info(&chip->spi->dev,
-+			"at73c213: supported bitrate is %lu (%lu divider)\n",
-+			chip->bitrate, ssc_div);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+	snd_at73c213_playback_hw.rate_min = chip->bitrate;
-+	snd_at73c213_playback_hw.rate_max = chip->bitrate;
-+	runtime->hw = snd_at73c213_playback_hw;
-+	chip->substream = substream;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	chip->substream = NULL;
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
-+				 struct snd_pcm_hw_params *hw_params)
-+{
-+	return snd_pcm_lib_malloc_pages(substream,
-+					params_buffer_bytes(hw_params));
-+}
-+
-+static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+	return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	int block_size;
-+
-+	block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+	chip->period = 0;
-+
-+	ssc_writel(chip->ssc->regs, PDC_TPR,
-+			(long)runtime->dma_addr);
-+	ssc_writel(chip->ssc->regs, PDC_TCR, runtime->period_size * 2);
-+	ssc_writel(chip->ssc->regs, PDC_TNPR,
-+			(long)runtime->dma_addr + block_size);
-+	ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
-+				   int cmd)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	int retval = 0;
-+
-+	spin_lock(&chip->lock);
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_START:
-+		ssc_writel(chip->ssc->regs, IER, SSC_BIT(IER_ENDTX));
-+		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
-+		ssc_writel(chip->ssc->regs, IDR, SSC_BIT(IDR_ENDTX));
-+		break;
-+	default:
-+		dev_dbg(&chip->spi->dev, "spurious command %x\n", cmd);
-+		retval = -EINVAL;
-+		break;
-+	}
-+
-+	spin_unlock(&chip->lock);
-+
-+	return retval;
-+}
-+
-+static snd_pcm_uframes_t
-+snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	snd_pcm_uframes_t pos;
-+	unsigned long bytes;
-+
-+	bytes = ssc_readl(chip->ssc->regs, PDC_TPR)
-+		- (unsigned long)runtime->dma_addr;
-+
-+	pos = bytes_to_frames(runtime, bytes);
-+	if (pos >= runtime->buffer_size)
-+		pos -= runtime->buffer_size;
-+
-+	return pos;
-+}
-+
-+static struct snd_pcm_ops at73c213_playback_ops = {
-+	.open		= snd_at73c213_pcm_open,
-+	.close		= snd_at73c213_pcm_close,
-+	.ioctl		= snd_pcm_lib_ioctl,
-+	.hw_params	= snd_at73c213_pcm_hw_params,
-+	.hw_free	= snd_at73c213_pcm_hw_free,
-+	.prepare	= snd_at73c213_pcm_prepare,
-+	.trigger	= snd_at73c213_pcm_trigger,
-+	.pointer	= snd_at73c213_pcm_pointer,
-+};
-+
-+static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_chip(pcm);
-+	if (chip->pcm) {
-+		snd_pcm_lib_preallocate_free_for_all(chip->pcm);
-+		chip->pcm = NULL;
-+	}
-+}
-+
-+static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
-+{
-+	struct snd_pcm *pcm;
-+	int retval;
-+
-+	retval = snd_pcm_new(chip->card, chip->card->shortname,
-+			device, 1, 0, &pcm);
-+	if (retval < 0)
-+		goto out;
-+
-+	pcm->private_data = chip;
-+	pcm->private_free = snd_at73c213_pcm_free;
-+	pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
-+	strcpy(pcm->name, "at73c213");
-+	chip->pcm = pcm;
-+
-+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
-+
-+	retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
-+			SNDRV_DMA_TYPE_DEV, &chip->ssc->pdev->dev,
-+			64 * 1024, 64 * 1024);
-+out:
-+	return retval;
-+}
-+
-+static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
-+{
-+	struct snd_at73c213 *chip = dev_id;
-+	struct snd_pcm_runtime *runtime = chip->substream->runtime;
-+	u32 status;
-+	int offset;
-+	int block_size;
-+	int next_period;
-+	int retval = IRQ_NONE;
-+
-+	spin_lock(&chip->lock);
-+
-+	block_size = frames_to_bytes(runtime, runtime->period_size);
-+	status = ssc_readl(chip->ssc->regs, IMR);
-+
-+	if (status & SSC_BIT(IMR_ENDTX)) {
-+		chip->period++;
-+		if (chip->period == runtime->periods)
-+			chip->period = 0;
-+		next_period = chip->period + 1;
-+		if (next_period == runtime->periods)
-+			next_period = 0;
-+
-+		offset = block_size * next_period;
-+
-+		ssc_writel(chip->ssc->regs, PDC_TNPR,
-+				(long)runtime->dma_addr + offset);
-+		ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
-+		retval = IRQ_HANDLED;
-+	}
-+
-+	ssc_readl(chip->ssc->regs, IMR);
-+	spin_unlock(&chip->lock);
-+
-+	if (status & SSC_BIT(IMR_ENDTX))
-+		snd_pcm_period_elapsed(chip->substream);
-+
-+	return retval;
-+}
-+
-+/*
-+ * Mixer functions.
-+ */
-+static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & mask;
-+
-+	if (invert)
-+		ucontrol->value.integer.value[0] =
-+			(mask - ucontrol->value.integer.value[0]);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+	int change, retval;
-+	unsigned short val;
-+
-+	val = (ucontrol->value.integer.value[0] & mask);
-+	if (invert)
-+		val = mask - val;
-+	val <<= shift;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	val = (chip->reg_image[reg] & ~(mask << shift)) | val;
-+	change = val != chip->reg_image[reg];
-+	retval = snd_at73c213_write_reg(chip, reg, val);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	if (retval)
-+		return retval;
-+
-+	return change;
-+}
-+
-+static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+
-+	if (mask == 1)
-+		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+	else
-+		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+
-+	uinfo->count = 2;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = mask;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int left_reg = kcontrol->private_value & 0xff;
-+	int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+	int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+	int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+	int invert = (kcontrol->private_value >> 22) & 1;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	ucontrol->value.integer.value[0] =
-+		(chip->reg_image[left_reg] >> shift_left) & mask;
-+	ucontrol->value.integer.value[1] =
-+		(chip->reg_image[right_reg] >> shift_right) & mask;
-+
-+	if (invert) {
-+		ucontrol->value.integer.value[0] =
-+			(mask - ucontrol->value.integer.value[0]);
-+		ucontrol->value.integer.value[1] =
-+			(mask - ucontrol->value.integer.value[1]);
-+	}
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int left_reg = kcontrol->private_value & 0xff;
-+	int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+	int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+	int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+	int invert = (kcontrol->private_value >> 22) & 1;
-+	int change, retval;
-+	unsigned short val1, val2;
-+
-+	val1 = ucontrol->value.integer.value[0] & mask;
-+	val2 = ucontrol->value.integer.value[1] & mask;
-+	if (invert) {
-+		val1 = mask - val1;
-+		val2 = mask - val2;
-+	}
-+	val1 <<= shift_left;
-+	val2 <<= shift_right;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	val1 = (chip->reg_image[left_reg] & ~(mask << shift_left)) | val1;
-+	val2 = (chip->reg_image[right_reg] & ~(mask << shift_right)) | val2;
-+	change = val1 != chip->reg_image[left_reg]
-+		|| val2 != chip->reg_image[right_reg];
-+	retval = snd_at73c213_write_reg(chip, left_reg, val1);
-+	if (retval) {
-+		spin_unlock_irq(&chip->lock);
-+		goto out;
-+	}
-+	retval = snd_at73c213_write_reg(chip, right_reg, val2);
-+	if (retval) {
-+		spin_unlock_irq(&chip->lock);
-+		goto out;
-+	}
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return change;
-+
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = 1;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & 0x01;
-+
-+	if (invert)
-+		ucontrol->value.integer.value[0] =
-+			(0x01 - ucontrol->value.integer.value[0]);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+	int change, retval;
-+	unsigned short val;
-+
-+	if (ucontrol->value.integer.value[0])
-+		val = mask;
-+	else
-+		val = 0;
-+
-+	if (invert)
-+		val = mask - val;
-+	val <<= shift;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	val |= (chip->reg_image[reg] & ~(mask << shift));
-+	change = val != chip->reg_image[reg];
-+
-+	retval = snd_at73c213_write_reg(chip, reg, val);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	if (retval)
-+		return retval;
-+
-+	return change;
-+}
-+
-+static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xff) - 1;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_line_capture_volume_info(
-+		struct snd_kcontrol *kcontrol,
-+		struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 2;
-+	/* When inverted will give values 0x10001 => 0. */
-+	uinfo->value.integer.min = 14;
-+	uinfo->value.integer.max = 31;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_aux_capture_volume_info(
-+		struct snd_kcontrol *kcontrol,
-+		struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	/* When inverted will give values 0x10001 => 0. */
-+	uinfo->value.integer.min = 14;
-+	uinfo->value.integer.max = 31;
-+
-+	return 0;
-+}
-+
-+#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert)	\
-+{									\
-+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
-+	.name = xname,							\
-+	.index = xindex,						\
-+	.info = snd_at73c213_mono_switch_info,				\
-+	.get = snd_at73c213_mono_switch_get,				\
-+	.put = snd_at73c213_mono_switch_put,				\
-+	.private_value = (reg | (shift << 8) | (mask << 16) | (invert << 24)) \
-+}
-+
-+#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
-+{									\
-+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
-+	.name = xname,							\
-+	.index = xindex,						\
-+	.info = snd_at73c213_stereo_info,				\
-+	.get = snd_at73c213_stereo_get,					\
-+	.put = snd_at73c213_stereo_put,					\
-+	.private_value = (left_reg | (right_reg << 8)			\
-+			| (shift_left << 16) | (shift_right << 19)	\
-+			| (mask << 24) | (invert << 22))		\
-+}
-+
-+static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
-+AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1f, 1),
-+AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
-+AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1f, 1),
-+AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
-+AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "PA Playback Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_pa_volume_info,
-+	.get	= snd_at73c213_mono_get,
-+	.put	= snd_at73c213_mono_put,
-+	.private_value	= PA_CTRL | (PA_CTRL_APAGAIN << 8) | (0x0f << 16) | (1 << 24),
-+},
-+AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
-+AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "Aux Capture Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_aux_capture_volume_info,
-+	.get	= snd_at73c213_mono_get,
-+	.put	= snd_at73c213_mono_put,
-+	.private_value	= DAC_AUXG | (0 << 8) | (0x1f << 16) | (1 << 24),
-+},
-+AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "Line Capture Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_line_capture_volume_info,
-+	.get	= snd_at73c213_stereo_get,
-+	.put	= snd_at73c213_stereo_put,
-+	.private_value	= DAC_LLIG | (DAC_RLIG << 8) | (0 << 16) | (0 << 19)
-+		| (0x1f << 24) | (1 << 22),
-+},
-+AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
-+};
-+
-+static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
-+{
-+	struct snd_card *card;
-+	int errval, idx;
-+
-+	if (chip == NULL || chip->pcm == NULL)
-+		return -EINVAL;
-+
-+	card = chip->card;
-+
-+	strcpy(card->mixername, chip->pcm->name);
-+
-+	for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
-+		errval = snd_ctl_add(card,
-+				snd_ctl_new1(&snd_at73c213_controls[idx],
-+					chip));
-+		if (errval < 0)
-+			goto cleanup;
-+	}
-+
-+	return 0;
-+
-+cleanup:
-+	for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
-+		struct snd_kcontrol *kctl;
-+		kctl = snd_ctl_find_numid(card, idx);
-+		if (kctl)
-+			snd_ctl_remove(card, kctl);
-+	}
-+	return errval;
-+}
-+
-+/*
-+ * Device functions
-+ */
-+static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
-+{
-+	/*
-+	 * Continuous clock output.
-+	 * Starts on falling TF.
-+	 * Delay 1 cycle (1 bit).
-+	 * Periode is 16 bit (16 - 1).
-+	 */
-+	ssc_writel(chip->ssc->regs, TCMR,
-+			SSC_BF(TCMR_CKO, 1)
-+			| SSC_BF(TCMR_START, 4)
-+			| SSC_BF(TCMR_STTDLY, 1)
-+			| SSC_BF(TCMR_PERIOD, 16 - 1));
-+	/*
-+	 * Data length is 16 bit (16 - 1).
-+	 * Transmit MSB first.
-+	 * Transmit 2 words each transfer.
-+	 * Frame sync length is 16 bit (16 - 1).
-+	 * Frame starts on negative pulse.
-+	 */
-+	ssc_writel(chip->ssc->regs, TFMR,
-+			SSC_BF(TFMR_DATLEN, 16 - 1)
-+			| SSC_BIT(TFMR_MSBF)
-+			| SSC_BF(TFMR_DATNB, 1)
-+			| SSC_BF(TFMR_FSLEN, 16 - 1)
-+			| SSC_BF(TFMR_FSOS, 1));
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
-+{
-+	int retval;
-+	unsigned char dac_ctrl = 0;
-+
-+	retval = snd_at73c213_set_bitrate(chip);
-+	if (retval)
-+		goto out;
-+
-+	/* Enable DAC master clock. */
-+	clk_enable(chip->board->dac_clk);
-+
-+	/* Initialize at73c213 on SPI bus. */
-+	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
-+	if (retval)
-+		goto out_clk;
-+	msleep(1);
-+	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x03);
-+	if (retval)
-+		goto out_clk;
-+
-+	/* Precharge everything. */
-+	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0xff);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL,
-+			(1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR));
-+	if (retval)
-+		goto out_clk;
-+
-+	msleep(50);
-+
-+	/* Stop precharging PA. */
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL,
-+			(1<<PA_CTRL_APALP) | 0x0f);
-+	if (retval)
-+		goto out_clk;
-+
-+	msleep(450);
-+
-+	/* Stop precharging DAC, turn on master power. */
-+	retval = snd_at73c213_write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
-+	if (retval)
-+		goto out_clk;
-+
-+	msleep(1);
-+
-+	/* Turn on DAC. */
-+	dac_ctrl = (1<<DAC_CTRL_ONDACL) | (1<<DAC_CTRL_ONDACR)
-+		| (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR);
-+
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL, dac_ctrl);
-+	if (retval)
-+		goto out_clk;
-+
-+	/* Mute sound. */
-+	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
-+	if (retval)
-+		goto out_clk;
-+
-+	/* Enable I2S device, i.e. clock output. */
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
-+
-+	goto out;
-+
-+out_clk:
-+	clk_disable(chip->board->dac_clk);
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_dev_free(struct snd_device *device)
-+{
-+	struct snd_at73c213 *chip = device->device_data;
-+
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+	if (chip->irq >= 0) {
-+		free_irq(chip->irq, chip);
-+		chip->irq = -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int __devinit snd_at73c213_dev_init(struct snd_card *card,
-+					 struct spi_device *spi)
-+{
-+	static struct snd_device_ops ops = {
-+		.dev_free	= snd_at73c213_dev_free,
-+	};
-+	struct snd_at73c213 *chip = get_chip(card);
-+	int irq, retval;
-+
-+	irq = chip->ssc->irq;
-+	if (irq < 0)
-+		return irq;
-+
-+	spin_lock_init(&chip->lock);
-+	chip->card = card;
-+	chip->irq = -1;
-+
-+	retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
-+	if (retval) {
-+		dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq);
-+		goto out;
-+	}
-+	chip->irq = irq;
-+
-+	memcpy(&chip->reg_image, &snd_at73c213_original_image,
-+			sizeof(snd_at73c213_original_image));
-+
-+	retval = snd_at73c213_ssc_init(chip);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_at73c213_chip_init(chip);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_at73c213_pcm_new(chip, 0);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_at73c213_mixer(chip);
-+	if (retval)
-+		goto out_snd_dev;
-+
-+	snd_card_set_dev(card, &spi->dev);
-+
-+	goto out;
-+
-+out_snd_dev:
-+	snd_device_free(card, chip);
-+out_irq:
-+	free_irq(chip->irq, chip);
-+	chip->irq = -1;
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_probe(struct spi_device *spi)
-+{
-+	struct snd_card			*card;
-+	struct snd_at73c213		*chip;
-+	struct at73c213_board_info	*board;
-+	int				retval;
-+	char				id[16];
-+
-+	board = spi->dev.platform_data;
-+	if (!board) {
-+		dev_dbg(&spi->dev, "no platform_data\n");
-+		return -ENXIO;
-+	}
-+
-+	if (!board->dac_clk) {
-+		dev_dbg(&spi->dev, "no DAC clk\n");
-+		return -ENXIO;
-+	}
-+
-+	if (IS_ERR(board->dac_clk)) {
-+		dev_dbg(&spi->dev, "no DAC clk\n");
-+		return PTR_ERR(board->dac_clk);
-+	}
-+
-+	retval = -ENOMEM;
-+
-+	/* Allocate "card" using some unused identifiers. */
-+	snprintf(id, sizeof id, "at73c213_%d", board->ssc_id);
-+	card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
-+	if (!card)
-+		goto out;
-+
-+	chip = card->private_data;
-+	chip->spi = spi;
-+	chip->board = board;
-+
-+	chip->ssc = ssc_request(board->ssc_id);
-+	if (IS_ERR(chip->ssc)) {
-+		dev_dbg(&spi->dev, "could not get ssc%d device\n",
-+				board->ssc_id);
-+		retval = PTR_ERR(chip->ssc);
-+		goto out_card;
-+	}
-+
-+	retval = snd_at73c213_dev_init(card, spi);
-+	if (retval)
-+		goto out_ssc;
-+
-+	strcpy(card->driver, "at73c213");
-+	strcpy(card->shortname, board->shortname);
-+	sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
-+
-+	retval = snd_card_register(card);
-+	if (retval)
-+		goto out_ssc;
-+
-+	dev_set_drvdata(&spi->dev, card);
-+
-+	goto out;
-+
-+out_ssc:
-+	ssc_free(chip->ssc);
-+out_card:
-+	snd_card_free(card);
-+out:
-+	return retval;
-+}
-+
-+static int __devexit snd_at73c213_remove(struct spi_device *spi)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+	int retval;
-+
-+	/* Stop playback. */
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+
-+	/* Mute sound. */
-+	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
-+	if (retval)
-+		goto out;
-+
-+	/* Turn off PA. */
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL, (chip->reg_image[PA_CTRL]|0x0f));
-+	if (retval)
-+		goto out;
-+	msleep(10);
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0f);
-+	if (retval)
-+		goto out;
-+
-+	/* Turn off external DAC. */
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x0c);
-+	if (retval)
-+		goto out;
-+	msleep(2);
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x00);
-+	if (retval)
-+		goto out;
-+
-+	/* Turn off master power. */
-+	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0x00);
-+	if (retval)
-+		goto out;
-+
-+out:
-+	/* Stop DAC master clock. */
-+	clk_disable(chip->board->dac_clk);
-+
-+	ssc_free(chip->ssc);
-+	snd_card_free(card);
-+	dev_set_drvdata(&spi->dev, NULL);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+	clk_disable(chip->board->dac_clk);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_resume(struct spi_device *spi)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+
-+	clk_enable(chip->board->dac_clk);
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
-+
-+	return 0;
-+}
-+#else
-+#define snd_at73c213_suspend NULL
-+#define snd_at73c213_resume NULL
-+#endif
-+
-+static struct spi_driver at73c213_driver = {
-+	.driver		= {
-+		.name	= "at73c213",
-+	},
-+	.probe		= snd_at73c213_probe,
-+	.suspend	= snd_at73c213_suspend,
-+	.resume		= snd_at73c213_resume,
-+	.remove		= __devexit_p(snd_at73c213_remove),
-+};
-+
-+static int __init at73c213_init(void)
-+{
-+	return spi_register_driver(&at73c213_driver);
-+}
-+module_init(at73c213_init);
-+
-+static void __exit at73c213_exit(void)
-+{
-+	spi_unregister_driver(&at73c213_driver);
-+}
-+module_exit(at73c213_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
-+MODULE_LICENSE("GPL");
-diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
-new file mode 100644
-index 0000000..fd8b372
---- /dev/null
-+++ b/sound/spi/at73c213.h
-@@ -0,0 +1,119 @@
-+/*
-+ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
-+ *
-+ * Copyright (C) 2006 - 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+
-+#ifndef _SND_AT73C213_H
-+#define _SND_AT73C213_H
-+
-+/* DAC control register */
-+#define DAC_CTRL		0x00
-+#define DAC_CTRL_ONPADRV	7
-+#define DAC_CTRL_ONAUXIN	6
-+#define DAC_CTRL_ONDACR		5
-+#define DAC_CTRL_ONDACL		4
-+#define DAC_CTRL_ONLNOR		3
-+#define DAC_CTRL_ONLNOL		2
-+#define DAC_CTRL_ONLNIR		1
-+#define DAC_CTRL_ONLNIL		0
-+
-+/* DAC left line in gain register */
-+#define DAC_LLIG		0x01
-+#define DAC_LLIG_LLIG		0
-+
-+/* DAC right line in gain register */
-+#define DAC_RLIG		0x02
-+#define DAC_RLIG_RLIG		0
-+
-+/* DAC Left Master Playback Gain Register */
-+#define DAC_LMPG		0x03
-+#define DAC_LMPG_LMPG		0
-+
-+/* DAC Right Master Playback Gain Register */
-+#define DAC_RMPG		0x04
-+#define DAC_RMPG_RMPG		0
-+
-+/* DAC Left Line Out Gain Register */
-+#define DAC_LLOG		0x05
-+#define DAC_LLOG_LLOG		0
-+
-+/* DAC Right Line Out Gain Register */
-+#define DAC_RLOG		0x06
-+#define DAC_RLOG_RLOG		0
-+
-+/* DAC Output Level Control Register */
-+#define DAC_OLC			0x07
-+#define DAC_OLC_RSHORT		7
-+#define DAC_OLC_ROLC		4
-+#define DAC_OLC_LSHORT		3
-+#define DAC_OLC_LOLC		0
-+
-+/* DAC Mixer Control Register */
-+#define DAC_MC			0x08
-+#define DAC_MC_INVR		5
-+#define DAC_MC_INVL		4
-+#define DAC_MC_RMSMIN2		3
-+#define DAC_MC_RMSMIN1		2
-+#define DAC_MC_LMSMIN2		1
-+#define DAC_MC_LMSMIN1		0
-+
-+/* DAC Clock and Sampling Frequency Control Register */
-+#define DAC_CSFC		0x09
-+#define DAC_CSFC_OVRSEL		4
-+
-+/* DAC Miscellaneous Register */
-+#define DAC_MISC		0x0A
-+#define DAC_MISC_VCMCAPSEL	7
-+#define DAC_MISC_DINTSEL	4
-+#define DAC_MISC_DITHEN		3
-+#define DAC_MISC_DEEMPEN	2
-+#define DAC_MISC_NBITS		0
-+
-+/* DAC Precharge Control Register */
-+#define DAC_PRECH		0x0C
-+#define DAC_PRECH_PRCHGPDRV	7
-+#define DAC_PRECH_PRCHGAUX1	6
-+#define DAC_PRECH_PRCHGLNOR	5
-+#define DAC_PRECH_PRCHGLNOL	4
-+#define DAC_PRECH_PRCHGLNIR	3
-+#define DAC_PRECH_PRCHGLNIL	2
-+#define DAC_PRECH_PRCHG		1
-+#define DAC_PRECH_ONMSTR	0
-+
-+/* DAC Auxiliary Input Gain Control Register */
-+#define DAC_AUXG		0x0D
-+#define DAC_AUXG_AUXG		0
-+
-+/* DAC Reset Register */
-+#define DAC_RST			0x10
-+#define DAC_RST_RESMASK		2
-+#define DAC_RST_RESFILZ		1
-+#define DAC_RST_RSTZ		0
-+
-+/* Power Amplifier Control Register */
-+#define PA_CTRL			0x11
-+#define PA_CTRL_APAON		6
-+#define PA_CTRL_APAPRECH	5
-+#define PA_CTRL_APALP		4
-+#define PA_CTRL_APAGAIN		0
-+
-+#endif /* _SND_AT73C213_H */