configs: regenerate all defconfigs

During the hackathon in Vienna, it was decided [0] to stop requiring
annotated defconfig files, and that they should all be regenerated.

This commit does just that.

This is a mechanical change, achieved by running (the defcfg script is
repriducedc at the end of the commit log):

    $ for cfg in configs/*_defconfig; do
        ./defcfg "${cfg##*/}" || break
      done

Out of our 302 defconfig files, only 247 needed regenerating, which
means that about 1 in 5 was already not providing the requested
annotations.

To be noted: three defconfig files had duplicate definitions, which this
commit resolves:

    nitrogen6sx_defconfig
    nitrogen7_defconfig
    olimex_a33_olinuxino_defconfig
        warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS

[0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>

====
Below is the script to reproduce the commmit. What it does is regenerate
the configuration first, then applies a patch to update kernel headers
to 3.11, and then recalls the defconfig again, and finally verifies that
the 3.11 headers are not selected (and ignores whether the latest are
selected or not): we want to catch whether defconfig that were using
3.10, currently the latest we support, would stioll get those headers
after we regeerate those.

    --->8------>8------>8------>8------>8---
    #!/bin/sh

    cfg="${1}"

    git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
    make "${cfg}"
    make savedefconfig

    patch -p1 <<_EOF_
    diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host
    index 2ae4077ffe..e669f89267 100644
    --- a/package/linux-headers/Config.in.host
    +++ b/package/linux-headers/Config.in.host
    @@ -129,8 +129,12 @@ choice
    	  If your kernel headers are more recent than the latest version
    	  in the choice, then select the latest version.

    +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11
    +	bool "6.11.x or later"
    +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
    +
     config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10
    -	bool "6.10.x or later"
    +	bool "6.10.x"
     	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10

     config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9
    diff --git a/toolchain/Config.in b/toolchain/Config.in
    index 6e91ab756c..c2522aca7f 100644
    --- a/toolchain/Config.in
    +++ b/toolchain/Config.in
    @@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
     config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
     	bool
     	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
    +
    +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
    +	bool
    +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
     	select BR2_TOOLCHAIN_HEADERS_LATEST

     # This should be selected by the latest version, above, to indicate that
    @@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST
     # stops affecting a value on the first matching default.
     config BR2_TOOLCHAIN_HEADERS_AT_LEAST
     	string
    +	default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
     	default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
     	default "6.9"  if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
     	default "6.8"  if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8
    _EOF_

    make "${cfg}"
    git checkout -- package/linux-headers/Config.in.host toolchain/Config.in

    diff="$(
        diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \
            <( tail -n +5 .config.old ) \
            <( tail -n +5 .config )
    )"
    if [ "${diff}" ]; then
        printf 'Not idempotent for "%s"\n' "${cfg}" >&2
        exit 1
    fi
    ---8<------8<------8<------8<------8<---

====
To verify that no other changes are made to the defconfigs that are
risky when the defaults change, we ran the following simple script
(where buildroot-prev is a checkout just before this commit). It shows
that there are many settings removed because they are default, but none
of them run the same risk that the default is going to be changed in the
future.

    for i in configs/*_defconfig; do
        diff="$(diffconfig ../buildroot-next/$i $i)"
        if [ -n "$diff" ]; then
            echo "==> $i"
            echo "$diff"
            echo
        fi
    done

    --->8------>8------>8------>8------>8---
    ==> configs/aarch64_efi_defconfig
    -BR2_TARGET_GRUB2_ARM64_EFI y

    ==> configs/acmesystems_aria_g25_128mb_defconfig
    -BR2_arm926t y

    ==> configs/acmesystems_aria_g25_256mb_defconfig
    -BR2_arm926t y

    ==> configs/acmesystems_arietta_g25_128mb_defconfig
    -BR2_arm926t y

    ==> configs/acmesystems_arietta_g25_256mb_defconfig
    -BR2_arm926t y

    ==> configs/amarula_vyasa_rk3288_defconfig
    -BR2_PACKAGE_HOST_UBOOT_TOOLS y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/armadeus_apf27_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y
    -BR2_arm926t y

    ==> configs/armadeus_apf28_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y
    -BR2_arm926t y

    ==> configs/armadeus_apf51_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y

    ==> configs/aspeed_ast2600evb_defconfig
    -BR2_ARM_FPU_VFPV4D16 y

    ==> configs/asus_tinker-s_rk3288_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/at91sam9260eknf_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y
    -BR2_arm926t y

    ==> configs/at91sam9g20dfc_defconfig
    -BR2_TARGET_ROOTFS_TAR y
    -BR2_TARGET_ROOTFS_UBIFS y
    -BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800
    -BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800
    -BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000
    -BR2_TARGET_ROOTFS_UBI_SUBSIZE 512
    -BR2_arm926t y

    ==> configs/at91sam9g45m10ek_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y
    -BR2_arm926t y

    ==> configs/at91sam9rlek_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y
    -BR2_arm926t y

    ==> configs/at91sam9x5ek_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y
    -BR2_arm926t y

    ==> configs/at91sam9x5ek_dev_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y
    -BR2_arm926t y

    ==> configs/at91sam9x5ek_mmc_defconfig
    -BR2_arm926t y

    ==> configs/at91sam9x5ek_mmc_dev_defconfig
    -BR2_arm926t y

    ==> configs/atmel_sama5d3_xplained_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y

    ==> configs/atmel_sama5d3_xplained_dev_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y

    ==> configs/atmel_sama5d3xek_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y

    ==> configs/atmel_sama5d4_xplained_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y

    ==> configs/atmel_sama5d4_xplained_dev_defconfig
    -BR2_TARGET_ROOTFS_UBIFS y

    ==> configs/bananapi_m2_ultra_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/bananapro_defconfig
    -BR2_ARM_EABIHF y
    -BR2_LINUX_KERNEL_USE_DEFCONFIG y
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_TARGET_UBOOT_FORMAT_BIN y

    ==> configs/beaglebone_qt5_defconfig
    -BR2_PACKAGE_TI_SGX_KM y
    -BR2_TOOLCHAIN_BUILDROOT_GLIBC y

    ==> configs/beagleboneai64_defconfig
    -BR2_TARGET_TI_K3_BOOT_FIRMWARE y
    -BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y

    ==> configs/beelink_gs1_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/canaan_kd233_defconfig
    -BR2_BINFMT_FLAT y
    -BR2_RISCV_64 y
    -BR2_RISCV_ABI_LP64D y

    ==> configs/ci20_defconfig
    -BR2_KERNEL_HEADERS_AS_KERNEL y
    -BR2_PACKAGE_HOST_UBOOT_TOOLS y
    -BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin"

    ==> configs/cubieboard2_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/freescale_imx28evk_defconfig
    -BR2_arm926t y

    ==> configs/friendlyarm_nanopi_r2s_defconfig
    -BR2_cortex_a53 y

    ==> configs/globalscale_espressobin_defconfig
    -BR2_cortex_a53 y

    ==> configs/hifive_unleashed_defconfig
    -BR2_LINUX_KERNEL_IMAGE y
    -BR2_RISCV_64 y
    -BR2_RISCV_ABI_LP64D y
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/imx23evk_defconfig
    -BR2_arm926t y

    ==> configs/imxrt1050-evk_defconfig
    -BR2_LINUX_KERNEL_ZIMAGE y

    ==> configs/khadas_vim3_defconfig
    -BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3"

    ==> configs/kontron_bl_imx8mm_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
    -BR2_cortex_a53 y

    ==> configs/kontron_pitx_imx8m_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/kontron_smarc_sal28_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/lafrite_defconfig
    -BR2_cortex_a53 y

    ==> configs/lego_ev3_defconfig
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_arm926t y

    ==> configs/linksprite_pcduino_defconfig
    -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/ls1046a-frwy_defconfig
    -BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046"

    ==> configs/mx6cubox_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/nexbox_a95x_defconfig
    -BR2_cortex_a53 y

    ==> configs/nitrogen6sx_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/nitrogen6x_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/nitrogen7_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/nitrogen8m_defconfig
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_cortex_a53 y

    ==> configs/nitrogen8mm_defconfig
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_cortex_a53 y

    ==> configs/nitrogen8mn_defconfig
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_cortex_a53 y

    ==> configs/nitrogen8mp_defconfig
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_cortex_a53 y

    ==> configs/odroidc2_defconfig
    -BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y

    ==> configs/olimex_a10_olinuxino_lime_defconfig
    -BR2_LINUX_KERNEL_USE_DEFCONFIG y
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_TARGET_UBOOT_FORMAT_BIN y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/olimex_a13_olinuxino_defconfig
    -BR2_LINUX_KERNEL_USE_DEFCONFIG y
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_TARGET_UBOOT_FORMAT_BIN y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/olimex_a20_olinuxino_lime2_defconfig
    -BR2_ARM_EABIHF y
    -BR2_LINUX_KERNEL_USE_DEFCONFIG y
    -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_TARGET_UBOOT_FORMAT_BIN y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
    -BR2_TOOLCHAIN_BUILDROOT_GLIBC y

    ==> configs/olimex_a20_olinuxino_lime_defconfig
    -BR2_ARM_EABIHF y
    -BR2_LINUX_KERNEL_USE_DEFCONFIG y
    -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_TARGET_UBOOT_FORMAT_BIN y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
    -BR2_TOOLCHAIN_BUILDROOT_GLIBC y

    ==> configs/olimex_a20_olinuxino_micro_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/olimex_a33_olinuxino_defconfig
    -BR2_LINUX_KERNEL_USE_DEFCONFIG y
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_TARGET_UBOOT_FORMAT_BIN y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/olimex_a64_olinuxino_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
    -BR2_cortex_a53 y

    ==> configs/olimex_imx233_olinuxino_defconfig
    -BR2_arm926t y

    ==> configs/openblocks_a6_defconfig
    -BR2_arm926t y

    ==> configs/orangepi_lite2_defconfig
    -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_cortex_a53 y

    ==> configs/orangepi_one_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/orangepi_one_plus_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_cortex_a53 y

    ==> configs/orangepi_pc_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/orangepi_pc_plus_defconfig
    -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/orangepi_r1_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/orangepi_zero2w_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
    -BR2_cortex_a53 y

    ==> configs/orangepi_zero3_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
    -BR2_cortex_a53 y

    ==> configs/orangepi_zero_defconfig
    -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/orangepi_zero_plus2_defconfig
    -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
    -BR2_cortex_a53 y

    ==> configs/orangepi_zero_plus_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
    -BR2_cortex_a53 y

    ==> configs/pine64_defconfig
    -BR2_cortex_a53 y

    ==> configs/pine64_sopine_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_cortex_a53 y

    ==> configs/qemu_aarch64_sbsa_defconfig
    -BR2_TARGET_GRUB2_ARM64_EFI y

    ==> configs/qemu_aarch64_virt_defconfig
    -BR2_cortex_a53 y

    ==> configs/qemu_arm_versatile_defconfig
    -BR2_arm926t y

    ==> configs/qemu_arm_vexpress_defconfig
    -BR2_ARM_FPU_VFPV3D16 y

    ==> configs/qemu_arm_vexpress_tz_defconfig
    -BR2_PACKAGE_LIBOPENSSL y

    ==> configs/qemu_m68k_mcf5208_defconfig
    -BR2_LINUX_KERNEL_VMLINUX y
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_m68k_q800_defconfig
    -BR2_LINUX_KERNEL_VMLINUX y
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_m68k_68040 y

    ==> configs/qemu_microblazebe_mmu_defconfig
    -BR2_microblaze y

    ==> configs/qemu_microblazeel_mmu_defconfig
    -BR2_microblaze y

    ==> configs/qemu_mips32r2_malta_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_mips32r2el_malta_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_mips32r6_malta_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_mips32r6el_malta_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_mips64_malta_defconfig
    -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_mips64el_malta_defconfig
    -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_mips64r6_malta_defconfig
    -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_mips64r6el_malta_defconfig
    -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_ppc64le_powernv8_defconfig
    -BR2_powerpc_power8 y

    ==> configs/qemu_ppc64le_pseries_defconfig
    -BR2_powerpc_power8 y

    ==> configs/qemu_ppc_bamboo_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_ppc_g3beige_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_ppc_mpc8544ds_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_riscv32_nommu_virt_defconfig
    -BR2_LINUX_KERNEL_IMAGE y
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_riscv32_virt_defconfig
    -BR2_LINUX_KERNEL_IMAGE y
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_riscv64_nommu_virt_defconfig
    -BR2_LINUX_KERNEL_IMAGE y
    -BR2_RISCV_64 y
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_riscv64_virt_defconfig
    -BR2_LINUX_KERNEL_IMAGE y
    -BR2_RISCV_64 y
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/qemu_sh4_r2d_defconfig
    -BR2_sh4 y

    ==> configs/qemu_sparc64_sun4u_defconfig
    -BR2_sparc_v9 y

    ==> configs/qemu_sparc_ss10_defconfig
    -BR2_sparc_v8 y

    ==> configs/qemu_x86_defconfig
    -BR2_i386 y

    ==> configs/raspberrypi0_defconfig
    -BR2_ARM_EABIHF y

    ==> configs/raspberrypi0w_defconfig
    -BR2_ARM_EABIHF y

    ==> configs/raspberrypi2_defconfig
    -BR2_ARM_EABIHF y

    ==> configs/raspberrypi3_64_defconfig
    -BR2_cortex_a53 y

    ==> configs/raspberrypi3_qt5we_defconfig
    -BR2_PACKAGE_KMOD y
    -BR2_PACKAGE_QT5BASE_JPEG y
    -BR2_PACKAGE_QT5BASE_PNG y
    -BR2_TOOLCHAIN_BUILDROOT_GLIBC y

    ==> configs/raspberrypi_defconfig
    -BR2_ARM_EABIHF y

    ==> configs/riotboard_defconfig
    -BR2_TARGET_GENERIC_GETTY y

    ==> configs/rock64_defconfig
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/rock_pi_n8_defconfig
    -BR2_LINUX_KERNEL_USE_DEFCONFIG y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/rockpro64_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
    -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y

    ==> configs/s6lx9_microboard_defconfig
    -BR2_microblaze y

    ==> configs/sheevaplug_defconfig
    -BR2_TARGET_GENERIC_GETTY y
    -BR2_TARGET_UBOOT_NETWORK n
    -BR2_arm926t y

    ==> configs/sipeed_maix_bit_defconfig
    -BR2_BINFMT_FLAT y
    -BR2_RISCV_64 y
    -BR2_RISCV_ABI_LP64D y

    ==> configs/sipeed_maix_bit_sdcard_defconfig
    -BR2_BINFMT_FLAT y
    -BR2_RISCV_64 y
    -BR2_RISCV_ABI_LP64D y
    -BR2_TARGET_UBOOT_FORMAT_BIN y

    ==> configs/sipeed_maix_dock_defconfig
    -BR2_BINFMT_FLAT y
    -BR2_RISCV_64 y
    -BR2_RISCV_ABI_LP64D y

    ==> configs/sipeed_maix_dock_sdcard_defconfig
    -BR2_BINFMT_FLAT y
    -BR2_RISCV_64 y
    -BR2_RISCV_ABI_LP64D y
    -BR2_TARGET_UBOOT_FORMAT_BIN y

    ==> configs/sipeed_maix_go_defconfig
    -BR2_BINFMT_FLAT y
    -BR2_RISCV_64 y
    -BR2_RISCV_ABI_LP64D y

    ==> configs/sipeed_maix_go_sdcard_defconfig
    -BR2_BINFMT_FLAT y
    -BR2_RISCV_64 y
    -BR2_RISCV_ABI_LP64D y
    -BR2_TARGET_UBOOT_FORMAT_BIN y

    ==> configs/sipeed_maixduino_defconfig
    -BR2_BINFMT_FLAT y
    -BR2_RISCV_64 y
    -BR2_RISCV_ABI_LP64D y

    ==> configs/sipeed_maixduino_sdcard_defconfig
    -BR2_BINFMT_FLAT y
    -BR2_RISCV_64 y
    -BR2_RISCV_ABI_LP64D y
    -BR2_TARGET_UBOOT_FORMAT_BIN y

    ==> configs/snps_archs38_hsdk_defconfig
    -BR2_TOOLCHAIN_BUILDROOT_GLIBC y

    ==> configs/solidrun_clearfog_gt_8k_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n

    ==> configs/solidrun_macchiatobin_defconfig
    -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
    -BR2_TARGET_ROOTFS_TAR y
    -BR2_TARGET_UBOOT_USE_DEFCONFIG y

    ==> configs/spike_riscv64_defconfig
    -BR2_RISCV_64 y

    ==> configs/ts5500_defconfig
    -BR2_i386 y
    -BR2_x86_i586 y

    ==> configs/versal_vck190_defconfig
    -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"

    ==> configs/versal_vpk180_defconfig
    -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"

    ==> configs/zynqmp_kria_kd240_defconfig
    -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"

    ==> configs/zynqmp_kria_kr260_defconfig
    -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"

    ==> configs/zynqmp_kria_kv260_defconfig
    -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"

    ==> configs/zynqmp_zcu102_defconfig
    -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"

    ==> configs/zynqmp_zcu104_defconfig
    -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"

    ==> configs/zynqmp_zcu106_defconfig
    -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
    ---8<------8<------8<------8<------8<---

configs/aarch64_efi_defconfig

@@ -1,34 +1,18 @@
-# Architecture
 BR2_aarch64=y
-
-# System
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-
-## Required tools to create bootable media
-BR2_PACKAGE_HOST_GENIMAGE=y
-
-# Bootloader
-BR2_TARGET_GRUB2=y
-BR2_TARGET_GRUB2_ARM64_EFI=y
-
-# Filesystem / image
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="200M"
-# BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/aarch64-efi/post-image.sh support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/aarch64-efi/genimage-efi.cfg"
-
-# Linux headers same as kernel, a 5.15 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.4"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Host tools for genimage
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="200M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_GRUB2=y
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/acmesystems_aria_g25_128mb_defconfig

@@ -1,11 +1,5 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Kernel headers
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-
-# System configuration
 BR2_GLOBAL_PATCH_DIR="board/acmesystems/aria-g25/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_TARGET_GENERIC_ISSUE="Welcome to Aria-G25 Buildroot"
@@ -13,8 +7,6 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/aria-g25/genimage.cfg"
-
-# Kernel configuration
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.315"
@@ -22,19 +14,13 @@ BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Root filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# AT91bootstrap bootloader
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3"
 BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="aria-128m"
-
-# Tools to build sdcard.img
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/acmesystems_aria_g25_256mb_defconfig

@@ -1,11 +1,5 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Kernel headers
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-
-# System configuration
 BR2_GLOBAL_PATCH_DIR="board/acmesystems/aria-g25/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_TARGET_GENERIC_ISSUE="Welcome to Aria-G25 Buildroot"
@@ -13,8 +7,6 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/aria-g25/genimage.cfg"
-
-# Kernel configuration
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.315"
@@ -22,19 +14,13 @@ BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Root filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# AT91bootstrap bootloader
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3"
 BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="aria-256m"
-
-# Tools to build sdcard.img
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/acmesystems_arietta_g25_128mb_defconfig

@@ -1,11 +1,5 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Kernel headers
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-
-# System configuration
 BR2_GLOBAL_PATCH_DIR="board/acmesystems/arietta-g25/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot"
@@ -13,8 +7,6 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/arietta-g25/genimage.cfg"
-
-# Kernel configuration
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.315"
@@ -22,19 +14,13 @@ BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Root filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# AT91bootstrap bootloader
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3"
 BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-128m"
-
-# Tools to build sdcard.img
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/acmesystems_arietta_g25_256mb_defconfig

@@ -1,11 +1,5 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Kernel headers
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-
-# System configuration
 BR2_GLOBAL_PATCH_DIR="board/acmesystems/arietta-g25/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot"
@@ -13,8 +7,6 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/arietta-g25/genimage.cfg"
-
-# Kernel configuration
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.315"
@@ -22,19 +14,13 @@ BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Root filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# AT91bootstrap bootloader
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3"
 BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-256m"
-
-# Tools to build sdcard.img
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/am574x_idk_defconfig

@@ -1,14 +1,10 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a15=y
-
-# System
-BR2_SYSTEM_DHCP="eth0"
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# Kernel
+BR2_SYSTEM_DHCP="eth0"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/ti/am574x-idk/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ti/am574x-idk/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.14"
@@ -16,30 +12,19 @@ BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/omap/am574x-idk"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Image
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/ti/am574x-idk/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ti/am574x-idk/genimage.cfg"
-
-# Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am57xx_evm"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="MLO"
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-
-# Required tools to create the SD image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/amarula_vyasa_rk3288_defconfig

@@ -1,49 +1,38 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a17=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 6.1 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 BR2_GLOBAL_PATCH_DIR="board/amarula/vyasa/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="vyasa-rk3288"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin"
-
-# Kernel
+BR2_TARGET_GENERIC_HOSTNAME="vyasa-rk3288"
+BR2_TARGET_GENERIC_ISSUE="Welcome to VYASA RK3288!"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/amarula/vyasa/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/vyasa/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.91"
 BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/amarula/vyasa/linux_gmac.fragment"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-vyasa"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/amarula/vyasa/linux_gmac.fragment"
-
-# Filesystem
-BR2_TARGET_GENERIC_HOSTNAME="vyasa-rk3288"
-BR2_TARGET_GENERIC_ISSUE="Welcome to VYASA RK3288!"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="vyasa-rk3288"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/vyasa/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/amarula/vyasa/post-build.sh"

configs/arcturus_ucls1012a_defconfig

@@ -1,17 +1,10 @@
-# Architecture
 BR2_aarch64=y
-
-# Linux headers same as kernel, a 5.4 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
-
-# System settings
 BR2_TARGET_GENERIC_HOSTNAME="ucls1012a"
 BR2_TARGET_GENERIC_ISSUE="Welcome to uCLS1012A-SOM"
 BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/arcturus/aarch64-ucls1012a/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/arcturus/aarch64-ucls1012a/post-image.sh"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,ArcturusNetworks,uCLS1012A-kernel,v.22.06)/linux-v.22.06.tar.gz"
@@ -19,18 +12,12 @@ BR2_LINUX_KERNEL_DEFCONFIG="ucls1012a"
 BR2_LINUX_KERNEL_IMAGEGZ=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="arcturus/arc-ucls1012a"
-
-# Filesystem
 BR2_TARGET_ROOTFS_CPIO=y
 BR2_TARGET_ROOTFS_CPIO_GZIP=y
-
-# U-boot
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,ArcturusNetworks,uCLS1012A-uboot,v.22.06)/uboot-v.22.06.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="UCLS1012A_QSPI128"
-
-# Tools
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y

configs/arcturus_ucp1020_defconfig

@@ -1,28 +1,17 @@
-# Architecture
 BR2_powerpc=y
 BR2_powerpc_8548=y
-
-# Linux headers same as kernel, a 4.4 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
-
-# System settings
 BR2_TARGET_GENERIC_HOSTNAME="UCP1020"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Arcturus uCP1020 System on Module"
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_SYSTEM_DHCP="eth0"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,ArcturusNetworks,uCP1020-kernel,v20190618)/linux-v20190618.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="ucp1020"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="ucp1020"
-
-# Filesystem
 BR2_TARGET_ROOTFS_JFFS2=y
-
-# U-boot
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y

configs/arm_foundationv8_defconfig

@@ -1,5 +1,4 @@
 BR2_aarch64=y
-# Linux headers same as kernel, a 6.8 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_8=y
 BR2_GLOBAL_PATCH_DIR="board/arm/foundation-v8/patches"
 BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"

configs/arm_fvp_ebbr_defconfig

@@ -1,32 +1,19 @@
-# Architecture
 BR2_aarch64=y
-
-# Image
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_8=y
 BR2_GLOBAL_PATCH_DIR="board/arm/fvp-ebbr/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/arm/fvp-ebbr/post-image.sh support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/arm/fvp-ebbr/genimage.cfg"
-
-# Linux headers
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_8=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.8.11"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Packages
 BR2_PACKAGE_OPTEE_CLIENT=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="200M"
 # BR2_TARGET_ROOTFS_TAR is not set
-
-# Firmware and bootloader
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.10"
@@ -49,8 +36,6 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07-rc3"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="vexpress_fvp"
 BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/arm/fvp-ebbr/u-boot.fragment"
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-
-# Host tools
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/armadeus_apf27_defconfig

@@ -1,25 +1,10 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Linux headers same as kernel, a 5.10 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-
-# Build
 BR2_GLOBAL_PATCH_DIR="board/armadeus/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# System
 BR2_TARGET_GENERIC_HOSTNAME="apf27"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Armadeus development platform !"
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2047
-BR2_TARGET_ROOTFS_UBI=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.215"
@@ -30,8 +15,8 @@ BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0xA0008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx27-apf27dev"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# U-boot
+BR2_TARGET_ROOTFS_UBI=y
+BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2047
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y

configs/armadeus_apf28_defconfig

@@ -1,20 +1,10 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Linux headers same as kernel, a 5.10 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-
-# Build
 BR2_GLOBAL_PATCH_DIR="board/armadeus/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# System
 BR2_TARGET_GENERIC_HOSTNAME="apf28"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Armadeus development platform !"
 BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.215"
@@ -24,10 +14,7 @@ BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x40008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx28-apf28dev"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
-BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=4227
 BR2_TARGET_ROOTFS_UBI=y
 BR2_TARGET_ROOTFS_UBI_SUBSIZE=0
+BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
+BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=4227

configs/armadeus_apf51_defconfig

@@ -1,20 +1,11 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a8=y
-
-# Linux headers same as kernel, a 5.10 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-
-# Build
 BR2_GLOBAL_PATCH_DIR="board/armadeus/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# System
 BR2_TARGET_GENERIC_HOSTNAME="apf51"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Armadeus development platform !"
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc2"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.215"
@@ -25,8 +16,5 @@ BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x90008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx51-apf51dev"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=135301
 BR2_TARGET_ROOTFS_UBI=y
+BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=135301

configs/aspeed_ast2500evb_defconfig

@@ -1,44 +1,29 @@
-# Architecture
 BR2_arm=y
-
-# System
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y
 BR2_TARGET_GENERIC_HOSTNAME="aspeed-evb"
 BR2_TARGET_GENERIC_ISSUE="Aspeed EVB"
 BR2_SYSTEM_DHCP="eth0"
-
-# Filesystem
-BR2_TARGET_ROOTFS_CPIO=y
-BR2_TARGET_ROOTFS_CPIO_XZ=y
-
-# Image
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/aspeed/common/post-image.sh"
-
-# Linux headers same as kernel
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.17.7"
 BR2_LINUX_KERNEL_DEFCONFIG="aspeed_g5"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/aspeed/ast2500-evb/linux.fragment"
+BR2_LINUX_KERNEL_XZ=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="aspeed-ast2500-evb"
-BR2_LINUX_KERNEL_XZ=y
-
-# Boot
+BR2_PACKAGE_MTD=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_CPIO_XZ=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="evb-ast2500"
+BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/aspeed/ast2500-evb/uboot.fragment"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=ast2500-evb"
-BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/aspeed/ast2500-evb/uboot.fragment"
+BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-
-# Target tools
-BR2_PACKAGE_MTD=y

configs/aspeed_ast2600evb_defconfig

@@ -1,32 +1,19 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a7=y
-BR2_ARM_FPU_VFPV4D16=y
-
-# System
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y
 BR2_TARGET_GENERIC_HOSTNAME="aspeed-evb"
 BR2_TARGET_GENERIC_ISSUE="Aspeed EVB"
 BR2_SYSTEM_DHCP="eth0"
-
-# Filesystem
-BR2_TARGET_ROOTFS_CPIO=y
-BR2_TARGET_ROOTFS_CPIO_XZ=y
-
-# Image
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/aspeed/common/post-image.sh"
-
-# Linux headers same as kernel
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.17.7"
 BR2_LINUX_KERNEL_DEFCONFIG="aspeed_g5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="aspeed-ast2600-evb"
-
-# Boot
+BR2_PACKAGE_MTD=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_CPIO_XZ=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
@@ -35,10 +22,6 @@ BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="f2b82fa4ba17ed8091fe76c284220006645a293b"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="evb-ast2600"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=ast2600a1-evb"
-
+BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-
-# Target tools
-BR2_PACKAGE_MTD=y

configs/asus_tinker-s_rk3288_defconfig

@@ -1,44 +1,34 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a17=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 6.1 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
-
-# Bootloader
+BR2_TARGET_GENERIC_HOSTNAME="tinker-rk3288-s"
+BR2_TARGET_GENERIC_ISSUE="Welcome to TINKER S RK3288!"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/asus/tinker-s/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/asus/tinker/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.79"
+BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-tinker-s"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="tinker-s-rk3288"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.79"
-BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-tinker-s"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Filesystem
-BR2_TARGET_GENERIC_HOSTNAME="tinker-rk3288-s"
-BR2_TARGET_GENERIC_ISSUE="Welcome to TINKER S RK3288!"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/asus/tinker/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/asus/tinker-s/post-build.sh"

configs/asus_tinker_rk3288_defconfig

@@ -1,12 +1,22 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a17=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 6.1 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
-
-# Bootloader
+BR2_TARGET_GENERIC_HOSTNAME="tinker-rk3288"
+BR2_TARGET_GENERIC_ISSUE="Welcome to TINKER RK3288!"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/asus/tinker/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/asus/tinker/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.44"
+BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-tinker"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -18,26 +28,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.44"
-BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-tinker"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Filesystem
-BR2_TARGET_GENERIC_HOSTNAME="tinker-rk3288"
-BR2_TARGET_GENERIC_ISSUE="Welcome to TINKER RK3288!"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/asus/tinker/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/asus/tinker/post-build.sh"

configs/at91sam9260eknf_defconfig

@@ -1,23 +1,12 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Linux headers same as kernel, a 4.8 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
 BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9260ek"
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
 BR2_TARGET_ROOTFS_UBI=y
-
-# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
@@ -28,6 +17,4 @@ BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9260ek_nandflash"
-
-# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/at91sam9g20dfc_defconfig

@@ -1,29 +1,13 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Linux headers same as kernel, a 4.8 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
 BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9g20ek"
-
-# Filesystem
-BR2_TARGET_ROOTFS_TAR=y
 BR2_TARGET_ROOTFS_UBI=y
-BR2_TARGET_ROOTFS_UBI_PEBSIZE=0x20000
-BR2_TARGET_ROOTFS_UBI_SUBSIZE=512
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f800
-BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x800
 BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2047
-
-# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
@@ -34,6 +18,4 @@ BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9g20ek_nandflash"
-
-# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/at91sam9g45m10ek_defconfig

@@ -1,24 +1,13 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Linux headers same as kernel, a 4.8 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
 BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9m10g45ek"
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2047
 BR2_TARGET_ROOTFS_UBI=y
-
-# Bootloaders
+BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2047
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
@@ -29,6 +18,4 @@ BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9m10g45ek_nandflash"
-
-# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/at91sam9rlek_defconfig

@@ -1,24 +1,13 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Linux headers same as kernel, a 4.8 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
 BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9rlek"
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2047
 BR2_TARGET_ROOTFS_UBI=y
-
-# Bootloaders
+BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2047
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
@@ -29,6 +18,4 @@ BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9rlek_nandflash"
-
-# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/at91sam9x5ek_defconfig

@@ -1,6 +1,4 @@
 BR2_arm=y
-BR2_arm926t=y
-# Linux headers same as kernel, a 4.4 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
 BR2_GLOBAL_PATCH_DIR="board/atmel/at91sam9x5ek/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
@@ -11,10 +9,9 @@ BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9g15ek at91sam9g25ek at91sam9g35ek at91sam9x25ek at91sam9x35ek"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_ROOTFS_UBI=y
 BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
+BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"

configs/at91sam9x5ek_dev_defconfig

@@ -1,19 +1,9 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-# Needed for some packages
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
-
-# System Configuration
 BR2_GLOBAL_PATCH_DIR="board/atmel/at91sam9x5ek/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-# Needed for usb-utils
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_6.1)/linux-linux4sam_6.1.tar.gz"
@@ -21,8 +11,6 @@ BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9g15ek at91sam9g25ek at91sam9g35ek at91sam9x25ek at91sam9x35ek"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Packages
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
 BR2_PACKAGE_ALSA_UTILS=y
 BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
@@ -72,14 +60,9 @@ BR2_PACKAGE_WPA_SUPPLICANT=y
 BR2_PACKAGE_BASH=y
 BR2_PACKAGE_HTOP=y
 BR2_PACKAGE_VIM=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_ROOTFS_UBI=y
 BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
-
-# Bootloaders
+BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
@@ -92,6 +75,4 @@ BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
 BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9x5ek_nandflash"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-
-# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/at91sam9x5ek_mmc_defconfig

@@ -1,19 +1,9 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-
-# Creation of the SD card image
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/at91sam9x5ek_mmc/genimage.cfg"
-
-# System Configuration
 BR2_GLOBAL_PATCH_DIR="board/atmel/at91sam9x5ek/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# Kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/at91sam9x5ek_mmc/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_6.1)/linux-linux4sam_6.1.tar.gz"
@@ -21,12 +11,8 @@ BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9g15ek at91sam9g25ek at91sam9g35ek at91sam9x25ek at91sam9x35ek"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
@@ -39,13 +25,10 @@ BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
 BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9x5ek_mmc"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE_SOURCE="board/atmel/at91sam9x5ek_mmc/uboot-env.txt"
 BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE_SIZE="0x4000"
-
-# Host packages
-# Needed to generate the SD card image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y

configs/at91sam9x5ek_mmc_dev_defconfig

@@ -1,22 +1,11 @@
-# Architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-# Needed for some packages
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
-
-# System Configuration
 BR2_GLOBAL_PATCH_DIR="board/atmel/at91sam9x5ek/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-# Needed for usb-utils
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-# Creation of the SD card image
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/at91sam9x5ek_mmc/genimage.cfg"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_6.1)/linux-linux4sam_6.1.tar.gz"
@@ -24,8 +13,6 @@ BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9g15ek at91sam9g25ek at91sam9g35ek at91sam9x25ek at91sam9x35ek"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Packages
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
 BR2_PACKAGE_ALSA_UTILS=y
 BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
@@ -75,13 +62,9 @@ BR2_PACKAGE_WPA_SUPPLICANT=y
 BR2_PACKAGE_BASH=y
 BR2_PACKAGE_HTOP=y
 BR2_PACKAGE_VIM=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
-
-# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
@@ -94,13 +77,10 @@ BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
 BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9x5ek_mmc"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE_SOURCE="board/atmel/at91sam9x5ek_mmc/uboot-env.txt"
 BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE_SIZE="0x4000"
-
-# Host packages
-# Needed to generate the SD card image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y

configs/atmel_sama5d2_xplained_mmc_dev_defconfig

@@ -1,23 +1,13 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a5=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_INSTRUCTIONS_THUMB2=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-# Needed for some packages
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
-
-# System Configuration
-# Needed for usb-utils
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-# Creation of the SD card image
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d2_xplained_mmc/genimage.cfg"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,linux,linux4microchip-2021.10)/linux-linux4microchip-2021.10.tar.gz"
@@ -25,8 +15,6 @@ BR2_LINUX_KERNEL_DEFCONFIG="sama5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d2_xplained"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Packages
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
 BR2_PACKAGE_ALSA_UTILS=y
 BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
@@ -76,13 +64,9 @@ BR2_PACKAGE_WPA_SUPPLICANT=y
 BR2_PACKAGE_BASH=y
 BR2_PACKAGE_HTOP=y
 BR2_PACKAGE_VIM=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
-
-# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v4.0.1)/at91bootstrap3-v4.0.1.tar.gz"
@@ -93,9 +77,6 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam_6.2)/u-boot-at91-linux4sam_6.2.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d2_xplained_mmc"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-
-# Host packages
-# Needed to generate the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/atmel_sama5d3_xplained_defconfig

@@ -10,10 +10,9 @@ BR2_LINUX_KERNEL_DEFCONFIG="sama5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d3_xplained"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_ROOTFS_UBI=y
 BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
+BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v4.0.1)/at91bootstrap3-v4.0.1.tar.gz"

configs/atmel_sama5d3_xplained_dev_defconfig

@@ -1,19 +1,10 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a5=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_INSTRUCTIONS_THUMB2=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-# Needed for some packages
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
-
-# System Configuration
-# Needed for usb-utils
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,linux,linux4microchip-2021.10)/linux-linux4microchip-2021.10.tar.gz"
@@ -21,8 +12,6 @@ BR2_LINUX_KERNEL_DEFCONFIG="sama5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d3_xplained"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Packages
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
 BR2_PACKAGE_ALSA_UTILS=y
 BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
@@ -72,14 +61,9 @@ BR2_PACKAGE_WPA_SUPPLICANT=y
 BR2_PACKAGE_BASH=y
 BR2_PACKAGE_HTOP=y
 BR2_PACKAGE_VIM=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_ROOTFS_UBI=y
 BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
-
-# Bootloaders
+BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v4.0.1)/at91bootstrap3-v4.0.1.tar.gz"
@@ -90,6 +74,4 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam_6.2)/u-boot-at91-linux4sam_6.2.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3_xplained_nandflash"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-
-# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/atmel_sama5d3_xplained_mmc_dev_defconfig

@@ -1,22 +1,12 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a5=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_INSTRUCTIONS_THUMB2=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-# Needed for some packages
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
-
-# System Configuration
-# Needed for usb-utils
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-# Creation of the SD card image
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d3_xplained_mmc/genimage.cfg"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,linux,linux4microchip-2021.10)/linux-linux4microchip-2021.10.tar.gz"
@@ -24,8 +14,6 @@ BR2_LINUX_KERNEL_DEFCONFIG="sama5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d3_xplained"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Packages
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
 BR2_PACKAGE_ALSA_UTILS=y
 BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
@@ -75,13 +63,9 @@ BR2_PACKAGE_WPA_SUPPLICANT=y
 BR2_PACKAGE_BASH=y
 BR2_PACKAGE_HTOP=y
 BR2_PACKAGE_VIM=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
-
-# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v4.0.1)/at91bootstrap3-v4.0.1.tar.gz"
@@ -92,9 +76,6 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam_6.2)/u-boot-at91-linux4sam_6.2.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3_xplained_mmc"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-
-# Host packages
-# Needed to generate the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/atmel_sama5d3xek_defconfig

@@ -1,27 +1,17 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a5=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_INSTRUCTIONS_THUMB2=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_5.8)/linux-linux4sam_5.8.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="sama5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="sama5d31ek sama5d33ek sama5d34ek sama5d35ek sama5d36ek"
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_ROOTFS_UBI=y
 BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
-
-# Bootloaders
+BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v3.10.3)/at91bootstrap3-v3.10.3.tar.gz"
@@ -33,6 +23,4 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,li
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3xek_nandflash"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_SPL=y
-
-# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/atmel_sama5d4_xplained_defconfig

@@ -11,13 +11,12 @@ BR2_LINUX_KERNEL_DEFCONFIG="sama5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d4_xplained"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x3e000
-BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x1000
-BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2082
 BR2_TARGET_ROOTFS_UBI=y
 BR2_TARGET_ROOTFS_UBI_PEBSIZE=0x40000
 BR2_TARGET_ROOTFS_UBI_SUBSIZE=0
+BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x3e000
+BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x1000
+BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2082
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v4.0.1)/at91bootstrap3-v4.0.1.tar.gz"

configs/atmel_sama5d4_xplained_dev_defconfig

@@ -1,20 +1,11 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a5=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_INSTRUCTIONS_THUMB2=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-# Needed for some packages
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
-
-# System Configuration
-# Needed for usb-utils
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,linux,linux4microchip-2021.10)/linux-linux4microchip-2021.10.tar.gz"
@@ -22,8 +13,6 @@ BR2_LINUX_KERNEL_DEFCONFIG="sama5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d4_xplained"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Packages
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
 BR2_PACKAGE_ALSA_UTILS=y
 BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
@@ -73,17 +62,12 @@ BR2_PACKAGE_WPA_SUPPLICANT=y
 BR2_PACKAGE_BASH=y
 BR2_PACKAGE_HTOP=y
 BR2_PACKAGE_VIM=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x3e000
-BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x1000
-BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2082
 BR2_TARGET_ROOTFS_UBI=y
 BR2_TARGET_ROOTFS_UBI_PEBSIZE=0x40000
 BR2_TARGET_ROOTFS_UBI_SUBSIZE=0
-
-# Bootloaders
+BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x3e000
+BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x1000
+BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2082
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v4.0.1)/at91bootstrap3-v4.0.1.tar.gz"
@@ -94,6 +78,4 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam_6.2)/u-boot-at91-linux4sam_6.2.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d4_xplained_nandflash"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-
-# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/atmel_sama5d4_xplained_mmc_dev_defconfig

@@ -1,23 +1,13 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a5=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_INSTRUCTIONS_THUMB2=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-# Needed for some packages
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
-
-# System Configuration
-# Needed for usb-utils
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-# Creation of the SD card image
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d4_xplained_mmc/genimage.cfg"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,linux,linux4microchip-2021.10)/linux-linux4microchip-2021.10.tar.gz"
@@ -25,8 +15,6 @@ BR2_LINUX_KERNEL_DEFCONFIG="sama5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d4_xplained"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Packages
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
 BR2_PACKAGE_ALSA_UTILS=y
 BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
@@ -76,13 +64,9 @@ BR2_PACKAGE_WPA_SUPPLICANT=y
 BR2_PACKAGE_BASH=y
 BR2_PACKAGE_HTOP=y
 BR2_PACKAGE_VIM=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
-
-# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v4.0.1)/at91bootstrap3-v4.0.1.tar.gz"
@@ -93,9 +77,6 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam_6.2)/u-boot-at91-linux4sam_6.2.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d4_xplained_mmc"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-
-# Host packages
-# Needed to generate the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/avenger96_defconfig

@@ -1,15 +1,8 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a7=y
-
-# Linux headers same as kernel, a 5.8 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# System configuration
 BR2_ROOTFS_OVERLAY="board/arrow/avenger96/overlay/"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/stmicroelectronics/common/stm32mp1xx/post-image.sh"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.22"
@@ -18,14 +11,10 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="st/stm32mp157a-dhcor-avenger96"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
-
-# Bootloaders
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="lts-v2.8.16"
@@ -42,12 +31,10 @@ BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted"
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set
 BR2_TARGET_UBOOT_FORMAT_DTB=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
 BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp15xx-dhcor-avenger96"
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-
-# Additional tools
 BR2_PACKAGE_HOST_GENIMAGE=y

configs/bananapi_m2_ultra_defconfig

@@ -21,7 +21,6 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m2_berry"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y

configs/bananapi_m2_zero_defconfig

@@ -23,9 +23,9 @@ BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m2-zero/boot.cmd"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m2-zero/boot.cmd"

configs/bananapro_defconfig

@@ -1,40 +1,37 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a7=y
-BR2_GLOBAL_PATCH_DIR="board/lemaker/bananapro/patches"
-BR2_ARM_EABIHF=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 5.4 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
-
-# System configuration
+BR2_GLOBAL_PATCH_DIR="board/lemaker/bananapro/patches"
 BR2_TARGET_GENERIC_HOSTNAME="bananapro"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Banana Pro!"
-BR2_TARGET_GENERIC_GETTY=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_ROOTFS_OVERLAY="board/lemaker/bananapro/rootfs_overlay"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/lemaker/bananapro/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/lemaker/bananapro/post-image.sh"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.7"
-BR2_LINUX_KERNEL_USE_DEFCONFIG=y
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/lemaker/bananapro/linux-wifi.fragment"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-bananapro"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
+BR2_PACKAGE_ALSA_UTILS=y
+# BR2_PACKAGE_ALSA_UTILS_ALSAMIXER is not set
+BR2_PACKAGE_ALSA_UTILS_AMIXER=y
+BR2_PACKAGE_ALSA_UTILS_APLAY=y
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
+BR2_PACKAGE_IW=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
-
-# Bootloaders
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -43,30 +40,8 @@ BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Bananapro"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_FORMAT_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
-
-# Wifi firmware for brcm43362
-BR2_PACKAGE_LINUX_FIRMWARE=y
-BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
-
-# Audio
-BR2_PACKAGE_ALSA_UTILS=y
-# BR2_PACKAGE_ALSA_UTILS_ALSAMIXER is not set
-BR2_PACKAGE_ALSA_UTILS_AMIXER=y
-BR2_PACKAGE_ALSA_UTILS_APLAY=y
-
-# For automatic firmware loading
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-
-# Wireless packages
-BR2_PACKAGE_IW=y
-BR2_PACKAGE_WPA_SUPPLICANT=y
-BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
-BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
-
-# Host tools
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/beaglebone_defconfig

@@ -1,22 +1,13 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a8=y
 BR2_ARM_FPU_VFPV3=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# System
 BR2_GLOBAL_PATCH_DIR="board/beagleboard/beaglebone/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-
-# Image
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/beagleboard/beaglebone/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beagleboard/beaglebone/genimage.cfg"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,beagleboard,linux,6.6.32-ti-arm32-r7)/linux-6.6.32-ti-arm32-r7.tar.gz"
@@ -24,12 +15,12 @@ BR2_LINUX_KERNEL_DEFCONFIG="bb.org"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/omap/am335x-evm ti/omap/am335x-bone ti/omap/am335x-boneblack ti/omap/am335x-bonegreen ti/omap/am335x-evmsk ti/omap/am335x-boneblue ti/omap/am335x-boneblack-wireless ti/omap/am335x-bonegreen-wireless"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_KMOD_TOOLS=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -41,15 +32,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="MLO"
-
-# Required tools to create the SD image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Enable compressed kernel module support
-BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
-BR2_PACKAGE_KMOD_TOOLS=y
-BR2_PACKAGE_XZ=y
-BR2_PACKAGE_KMOD=y
 BR2_PACKAGE_HOST_KMOD_XZ=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/beaglebone_qt5_defconfig

@@ -1,9 +1,8 @@
 BR2_arm=y
 BR2_cortex_a8=y
-BR2_GLOBAL_PATCH_DIR="board/beagleboard/beaglebone-qt5/patches"
-BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_GLOBAL_PATCH_DIR="board/beagleboard/beaglebone-qt5/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_ROOTFS_OVERLAY="board/beagleboard/beaglebone/rootfs_overlay"
@@ -25,7 +24,6 @@ BR2_PACKAGE_QT5BASE_EGLFS=y
 BR2_PACKAGE_QT5BASE_DEFAULT_QPA="eglfs"
 BR2_PACKAGE_QT5QUICKCONTROLS=y
 BR2_PACKAGE_TI_SGX_DEMOS=y
-BR2_PACKAGE_TI_SGX_KM=y
 BR2_PACKAGE_TI_SGX_UM=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y

configs/beagleboneai64_defconfig

@@ -3,10 +3,10 @@ BR2_cortex_a72=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_GLOBAL_PATCH_DIR="board/beagleboard/beagleboneai64/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/beagleboard/beagleboneai64/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beagleboard/beagleboneai64/genimage.cfg"
-BR2_SYSTEM_DHCP="eth0"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.30"
@@ -25,7 +25,6 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD="generic"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y
 BR2_TARGET_OPTEE_OS=y
 BR2_TARGET_OPTEE_OS_PLATFORM="k3-j721e"
-BR2_TARGET_TI_K3_BOOT_FIRMWARE=y
 BR2_TARGET_TI_K3_R5_LOADER=y
 BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION=y
 BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2024.04"
@@ -37,7 +36,6 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.04"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="j721e_beagleboneai64_a72"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
 BR2_TARGET_UBOOT_USE_BINMAN=y
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set

configs/beagleboneai_defconfig

@@ -1,8 +1,8 @@
 BR2_arm=y
 BR2_cortex_a15=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
 BR2_GLOBAL_PATCH_DIR="board/beagleboard/beagleboneai/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
 BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/beagleboard/beagleboneai/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"

configs/beelink_gs1_defconfig

@@ -1,16 +1,12 @@
-# Architecture
 BR2_aarch64=y
 BR2_ARM_FPU_VFPV4=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
-# MDEV is required to autoload the ethernet driver module
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
 BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
-
-# Kernel Linux headers same as kernel, 5.15 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15"
@@ -20,23 +16,18 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-beelink-gs1"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Firmware
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
-
-# Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="beelink_gs1"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"

configs/canaan_kd233_defconfig

@@ -1,6 +1,4 @@
-# Architecture
 BR2_riscv=y
-BR2_RISCV_64=y
 BR2_riscv_custom=y
 BR2_RISCV_ISA_RVM=y
 BR2_RISCV_ISA_RVA=y
@@ -8,16 +6,9 @@ BR2_RISCV_ISA_RVF=y
 BR2_RISCV_ISA_RVD=y
 BR2_RISCV_ISA_RVC=y
 # BR2_RISCV_USE_MMU is not set
-BR2_RISCV_ABI_LP64D=y
-
-# Linux headers same as kernel, a 5.19 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y
-
-# Binary format
-BR2_BINFMT_FLAT=y
+BR2_INIT_TINYINIT=y
 # BR2_TARGET_ENABLE_ROOT_LOGIN is not set
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19"
@@ -25,12 +16,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="nommu_k210"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/canaan/kd233/linux-cpio.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="loader.bin"
-
-# Packages
-BR2_PACKAGE_HOST_PYTHON_KFLASH=y
 BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/busybox-tiny.config"
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
-
-# Filesystem
-BR2_INIT_TINYINIT=y
 BR2_TARGET_ROOTFS_INITRAMFS=y
+BR2_PACKAGE_HOST_PYTHON_KFLASH=y

configs/chromebook_elm_defconfig

@@ -1,41 +1,22 @@
-# Architecture
 BR2_aarch64=y
 BR2_cortex_a72_a53=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Linux headers same as kernel (5.10 series)
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-
-# Kernel
+BR2_GLOBAL_PATCH_DIR="board/chromebook/elm/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/chromebook/elm/sign.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/chromebook/mksd.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10"
-
-# Build Kernel with a Custom config.
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/chromebook/elm/linux.config"
-
-# DTS support
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="mediatek/mt8173-elm"
-
-# Package Firmware for WiFi chip.
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_MWIFIEX_SD8797=y
-
-# Scripts to generate final images.
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/chromebook/elm/sign.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/chromebook/mksd.sh"
-
-# Supporting host tools to build / sign FIT Image.
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_PACKAGE_HOST_PARTED=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
 BR2_PACKAGE_HOST_VBOOT_UTILS=y
-
-# Misc
-BR2_GLOBAL_PATCH_DIR="board/chromebook/elm/patches"
-BR2_DOWNLOAD_FORCE_CHECK_HASHES=y

configs/ci20_defconfig

@@ -1,26 +1,18 @@
-# architecture
 BR2_mipsel=y
 BR2_mips_xburst=y
 # BR2_MIPS_SOFT_FLOAT is not set
-BR2_KERNEL_HEADERS_AS_KERNEL=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS4"
 BR2_SYSTEM_DHCP="eth0"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ci20/genimage.cfg"
-
-# kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.81"
 BR2_LINUX_KERNEL_DEFCONFIG="ci20"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# u-boot
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -28,12 +20,8 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ci20_mmc"
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE_SOURCE="board/ci20/uboot-env.txt"
 BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE_SIZE="32768"
-
-# host
-BR2_PACKAGE_HOST_GENIMAGE=y

configs/cubieboard1_defconfig

@@ -1,20 +1,11 @@
-# Target
 BR2_arm=y
 BR2_cortex_a8=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_8=y
-
-# Build options
 BR2_GLOBAL_PATCH_DIR="board/cubietech/cubieboard1/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# System configuration
 BR2_ROOTFS_OVERLAY="board/cubietech/cubieboard1/rootfs_overlay"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/cubietech/cubieboard1/genimage.cfg"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.8.12"
@@ -22,12 +13,8 @@ BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun4i-a10-cubieboard"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Filesystem images
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -37,6 +24,4 @@ BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
-
-# Host utilities
 BR2_PACKAGE_HOST_GENIMAGE=y

configs/cubieboard2_defconfig

@@ -1,42 +1,32 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 5.15 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
-
-# Kernel
+BR2_TARGET_GENERIC_HOSTNAME="Cubieboard2"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Cubieboard2!"
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard2/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.11"
 BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-cubieboard2"
-
-# Bootloader
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Cubieboard2"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/cubietech/cubieboard2/boot.cmd"
-
-# System
-BR2_TARGET_GENERIC_HOSTNAME="Cubieboard2"
-BR2_TARGET_GENERIC_ISSUE="Welcome to Cubieboard2!"
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard2/post-image.sh"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/cubietech/cubieboard2/boot.cmd"

configs/engicam_imx6qdl_icore_defconfig

@@ -3,26 +3,11 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# Linux headers same as kernel, a 5.0 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# System
+BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo"
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="SPL"
-
-# Kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
@@ -31,13 +16,18 @@ BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore imx6q-icore-ofcap10 imx6q-icore-ofcap12"
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="SPL"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6/genimage.cfg"

configs/engicam_imx6qdl_icore_qt5_defconfig

@@ -3,74 +3,23 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# Linux headers same as kernel, a 4.13 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
-
-# System
-BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="SPL"
-
-# Kernel
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
+BR2_ROOTFS_OVERLAY="board/engicam/icorem6/rootfs_overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/engicam/icorem6/linux_qt5.fragment"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore imx6q-icore-ofcap10 imx6q-icore-ofcap12"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/engicam/icorem6/linux_qt5.fragment"
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6/genimage.cfg"
-BR2_ROOTFS_OVERLAY="board/engicam/icorem6/rootfs_overlay"
-
-# qt5 dependencies
-BR2_TOOLCHAIN_BUILDROOT_CXX=y
-
-# qt5
-BR2_PACKAGE_QT5=y
-BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
-BR2_PACKAGE_QT5BASE_LINUXFB=y
-BR2_PACKAGE_QT5BASE_FONTCONFIG=y
-BR2_PACKAGE_QT5BASE_GIF=y
-BR2_PACKAGE_QT5BASE_JPEG=y
-
-# mesa3d
-BR2_PACKAGE_MESA3D=y
-BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y
-BR2_PACKAGE_MESA3D_OPENGL_ES=y
-BR2_PACKAGE_MESA3D_OPENGL_EGL=y
-
-# qt5 demo packages
-BR2_PACKAGE_GLMARK2=y
-BR2_PACKAGE_MESA3D_DEMOS=y
-BR2_PACKAGE_KMSCUBE=y
-BR2_PACKAGE_QT5CINEX=y
-BR2_PACKAGE_QT5CINEX_HD=y
-
-# fonts
 BR2_PACKAGE_BITSTREAM_VERA=y
 BR2_PACKAGE_CANTARELL=y
 BR2_PACKAGE_DEJAVU=y
@@ -78,3 +27,34 @@ BR2_PACKAGE_FONT_AWESOME=y
 BR2_PACKAGE_GHOSTSCRIPT_FONTS=y
 BR2_PACKAGE_INCONSOLATA=y
 BR2_PACKAGE_LIBERATION=y
+BR2_PACKAGE_GLMARK2=y
+BR2_PACKAGE_KMSCUBE=y
+BR2_PACKAGE_MESA3D_DEMOS=y
+BR2_PACKAGE_QT5CINEX=y
+BR2_PACKAGE_QT5CINEX_HD=y
+BR2_PACKAGE_MESA3D=y
+BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y
+BR2_PACKAGE_MESA3D_OPENGL_EGL=y
+BR2_PACKAGE_MESA3D_OPENGL_ES=y
+BR2_PACKAGE_QT5=y
+BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
+BR2_PACKAGE_QT5BASE_LINUXFB=y
+BR2_PACKAGE_QT5BASE_FONTCONFIG=y
+BR2_PACKAGE_QT5BASE_GIF=y
+BR2_PACKAGE_QT5BASE_JPEG=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="SPL"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/engicam_imx6qdl_icore_rqs_defconfig

@@ -3,26 +3,11 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# Linux headers same as kernel, a 5.0 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# System
+BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS Starter Kit"
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_rqs"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="SPL"
-
-# Kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6_rqs/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
@@ -31,13 +16,18 @@ BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore-rqs imx6q-icore-rqs"
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS Starter Kit"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_rqs"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="SPL"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6_rqs/genimage.cfg"

configs/engicam_imx6ul_geam_defconfig

@@ -3,26 +3,11 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# Linux headers same as kernel, a 4.11 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
-
-# System
+BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam GEAM6UL Starter Kit"
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07-rc1"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ul_geam_mmc"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="SPL"
-
-# Kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/geam6ul/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5"
@@ -31,13 +16,18 @@ BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-geam-kit"
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam GEAM6UL Starter Kit"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07-rc1"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ul_geam_mmc"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="SPL"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/geam6ul/genimage.cfg"

configs/engicam_imx6ul_isiot_defconfig

@@ -3,26 +3,11 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# Linux headers same as kernel, a 5.0 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# System
+BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam Is.IoT eMMC Starter Kit"
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ul_isiot_emmc"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="SPL"
-
-# Kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/isiot/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
@@ -31,13 +16,18 @@ BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-isiot-emmc"
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam Is.IoT eMMC Starter Kit"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ul_isiot_emmc"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="SPL"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/isiot/genimage.cfg"

configs/freescale_imx28evk_defconfig

@@ -1,34 +1,20 @@
-# architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
-
-# kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/mxs/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.26"
 BR2_LINUX_KERNEL_DEFCONFIG="mxs"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/mxs/imx28-evk"
-
-# bootloader
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx28evk"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.04"
 BR2_TARGET_UBOOT_FORMAT_SD=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-
-# To generate SD Image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/mxs/post-image.sh"

configs/freescale_imx6dlsabreauto_defconfig

@@ -1,21 +1,13 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# patches
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# Linux headers same as kernel, a 6.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
-
-# kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.6.23-2.0.0)/linux-imx-lf-6.6.23-2.0.0.tar.gz"
@@ -23,22 +15,15 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6dl-sabreauto"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# filesystem
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# required tools to create the microSD image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6dlsabreauto"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.6.23-2.0.0)/uboot-imx-lf-6.6.23-2.0.0.tar.gz"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/freescale_imx6dlsabresd_defconfig

@@ -1,21 +1,13 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# patches
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# Linux headers same as kernel, a 6.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.6.23-2.0.0)/linux-imx-lf-6.6.23-2.0.0.tar.gz"
@@ -23,21 +15,14 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6dl-sabresd"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# filesystem
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_TARGET_ROOTFS_EXT2=y
-
-# required tools to create the microSD image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6dlsabresd"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.6.23-2.0.0)/uboot-imx-lf-6.6.23-2.0.0.tar.gz"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/freescale_imx6qsabreauto_defconfig

@@ -1,21 +1,13 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# patches
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# Linux headers same as kernel, a 6.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
-
-# kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.6.23-2.0.0)/linux-imx-lf-6.6.23-2.0.0.tar.gz"
@@ -23,22 +15,15 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6q-sabreauto"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# filesystem
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# required tools to create the microSD image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6qsabreauto"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.6.23-2.0.0)/uboot-imx-lf-6.6.23-2.0.0.tar.gz"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/freescale_imx6qsabresd_defconfig

@@ -1,21 +1,13 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# patches
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# Linux headers same as kernel, a 6.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.6.23-2.0.0)/linux-imx-lf-6.6.23-2.0.0.tar.gz"
@@ -23,22 +15,15 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6q-sabresd"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# filesystem
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# required tools to create the microSD image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6qsabresd"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.6.23-2.0.0)/uboot-imx-lf-6.6.23-2.0.0.tar.gz"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/freescale_imx6sxsabresd_defconfig

@@ -1,21 +1,13 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# patches
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# Linux headers same as kernel, a 6.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.6.23-2.0.0)/linux-imx-lf-6.6.23-2.0.0.tar.gz"
@@ -23,21 +15,14 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6sx-sdb"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# filesystem
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_TARGET_ROOTFS_EXT2=y
-
-# required tools to create the microSD image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6sxsabresd"
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.6.23-2.0.0)/uboot-imx-lf-6.6.23-2.0.0.tar.gz"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/freescale_imx7dsabresd_defconfig

@@ -1,18 +1,10 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a7=y
-
-# patches
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx7dsdb/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# Linux headers same as kernel, a 6.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# Kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.6.23-2.0.0)/linux-imx-lf-6.6.23-2.0.0.tar.gz"
@@ -20,22 +12,15 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx7d-sdb"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx7dsabresd"
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.6.23-2.0.0)/uboot-imx-lf-6.6.23-2.0.0.tar.gz"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-
-# required tools to create the microSD image
+BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"

configs/freescale_imx8mmevk_defconfig

@@ -30,8 +30,8 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.6.23-2.0.0)/uboot-imx-lf-6.6.23-2.0.0.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mm_evk"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
 BR2_TARGET_UBOOT_SPL=y

configs/freescale_imx8mpevk_defconfig

@@ -32,8 +32,8 @@ BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mp_evk"
 BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/freescale/imx8mpevk/uboot-fragment.config"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
+BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
 BR2_TARGET_UBOOT_SPL=y

configs/freescale_imx8mqevk_defconfig

@@ -30,8 +30,8 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.6.23-2.0.0)/uboot-imx-lf-6.6.23-2.0.0.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mq_evk"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
 BR2_TARGET_UBOOT_SPL=y

configs/freescale_p1025twr_defconfig

@@ -1,14 +1,7 @@
-# Architecture
 BR2_powerpc=y
 BR2_powerpc_8548=y
-
-# Linux headers same as kernel, a 4.15 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y
-
-# Serial port config
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.7"
@@ -16,8 +9,6 @@ BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx_smp"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/p1025twr"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_CPIO=y
 BR2_TARGET_ROOTFS_CPIO_GZIP=y
 BR2_TARGET_ROOTFS_CPIO_UIMAGE=y

configs/freescale_t1040d4rdb_defconfig

@@ -1,14 +1,7 @@
-# Architecture
 BR2_powerpc64=y
 BR2_powerpc_e5500=y
-
-# Linux headers same as kernel, a 4.15 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y
-
-# Serial port config
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.7"
@@ -16,8 +9,6 @@ BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t1040d4rdb"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_CPIO=y
 BR2_TARGET_ROOTFS_CPIO_GZIP=y
 BR2_TARGET_ROOTFS_CPIO_UIMAGE=y

configs/freescale_t2080_qds_rdb_defconfig

@@ -1,14 +1,7 @@
-# Architecture
 BR2_powerpc64=y
 BR2_powerpc_e6500=y
-
-# Linux headers same as kernel
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
-
-# Serial port config
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.14"
@@ -16,10 +9,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t2080qds fsl/t2080rdb"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_CPIO=y
 BR2_TARGET_ROOTFS_CPIO_GZIP=y
 BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
 # BR2_TARGET_ROOTFS_TAR is not set
-

configs/friendlyarm_nanopi_neo_defconfig

@@ -1,25 +1,14 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# Hashes
 BR2_GLOBAL_PATCH_DIR="board/friendlyarm/nanopi-neo/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# System
 BR2_TARGET_GENERIC_HOSTNAME="nanopi-neo"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi NEO"
-
-# Image
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo/genimage.cfg"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.44"
@@ -27,12 +16,8 @@ BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-h3-nanopi-neo"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -43,6 +28,4 @@ BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-
-# Host utilities
 BR2_PACKAGE_HOST_GENIMAGE=y

configs/friendlyarm_nanopi_r2s_defconfig

@@ -1,5 +1,4 @@
 BR2_aarch64=y
-BR2_cortex_a53=y
 BR2_ARM_FPU_VFPV4=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y
 BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s"

configs/galileo_defconfig

@@ -1,7 +1,6 @@
 BR2_x86_x1000=y
-BR2_GLOBAL_PATCH_DIR="board/intel/galileo/patches"
-# Linux headers same as kernel, a 3.14 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
+BR2_GLOBAL_PATCH_DIR="board/intel/galileo/patches"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS1"
 BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y

configs/globalscale_espressobin_defconfig

@@ -1,11 +1,9 @@
 BR2_aarch64=y
-BR2_cortex_a53=y
 BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.15 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
-
-# Kernel
+BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Marvell ESPRESSObin"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/globalscale/espressobin/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.1"
@@ -15,13 +13,8 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="marvell/armada-3720-espressobin marvell/armada-3720-espressobin-emmc marvell/armada-3720-espressobin-v7 marvell/armada-3720-espressobin-v7-emmc marvell/armada-3720-espressobin-ultra"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Marvell ESPRESSObin"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 BR2_TARGET_ROOTFS_TAR_GZIP=y
 BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/globalscale/espressobin/genimage.cfg"

configs/hifive_unleashed_defconfig

@@ -1,4 +1,3 @@
-# Architecture
 BR2_riscv=y
 BR2_riscv_custom=y
 BR2_RISCV_ISA_RVM=y
@@ -6,55 +5,39 @@ BR2_RISCV_ISA_RVA=y
 BR2_RISCV_ISA_RVF=y
 BR2_RISCV_ISA_RVD=y
 BR2_RISCV_ISA_RVC=y
-BR2_RISCV_64=y
-BR2_RISCV_ABI_LP64D=y
-
-# System
-BR2_SYSTEM_DHCP="eth0"
-BR2_TARGET_GENERIC_GETTY=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttySIF0"
+BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/sifive/hifive-unleashed/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sifive/hifive-unleashed/genimage_sdcard.cfg"
-
-# Filesystem
-BR2_TARGET_ROOTFS_CPIO=y
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.190"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sifive/hifive-unleashed/linux.config.fragment"
-BR2_LINUX_KERNEL_IMAGE=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="sifive/hifive-unleashed-a00"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Bootloader
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_OPENSBI=y
 BR2_TARGET_OPENSBI_CUSTOM_VERSION=y
 BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.2"
 BR2_TARGET_OPENSBI_PLAT="generic"
 BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sifive_unleashed"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
 BR2_TARGET_UBOOT_SPL=y
-
-# Host tools
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y

configs/icnova-a20-adb4006_defconfig

@@ -1,23 +1,14 @@
 BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 6.6 LTS series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# System
 BR2_TARGET_GENERIC_HOSTNAME="ICnova A20 ADB4006"
 BR2_TARGET_GENERIC_ISSUE="Welcome to ICnova A20 ADB4006!"
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/in-circuit/icnova-a20-adb4006/genimage.cfg"
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.14"
@@ -26,13 +17,9 @@ BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/in-circuit/icnova-a20-adb4006/linu
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun7i-a20-icnova-a20-adb4006"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
-
-# Bootloaders
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -43,6 +30,9 @@ BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/in-circuit/icnova-a20-adb4006/boot.cmd"

configs/imx23evk_defconfig

@@ -1,34 +1,20 @@
-# architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
-
-# kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/mxs/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.21"
 BR2_LINUX_KERNEL_DEFCONFIG="mxs"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/mxs/imx23-evk"
-
-# bootloader
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx23evk"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01"
 BR2_TARGET_UBOOT_FORMAT_SD=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-
-# To generate SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/mxs/post-image.sh"

configs/imx6-sabreauto_defconfig

@@ -3,39 +3,27 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# System
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
-
-# required tools to create the SD card image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Filesystem
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.47"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6q-sabreauto nxp/imx/imx6dl-sabreauto nxp/imx/imx6qp-sabreauto"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6sabreauto"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_NEEDS_LZOP=y
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.47"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6q-sabreauto nxp/imx/imx6dl-sabreauto nxp/imx/imx6qp-sabreauto"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/imx6-sabresd_defconfig

@@ -3,38 +3,26 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# System
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# required tools to create the SD card image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Filesystem
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.47"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6q-sabresd nxp/imx/imx6dl-sabresd nxp/imx/imx6qp-sabresd"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6sabresd"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.47"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6q-sabresd nxp/imx/imx6dl-sabresd nxp/imx/imx6qp-sabresd"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/imx6-sabresd_qt5_defconfig

@@ -3,55 +3,28 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# Additional features needed for packages
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
-
-# System
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# required tools to create the SD card image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Filesystem
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="320M"
 BR2_ROOTFS_OVERLAY="board/freescale/imx6-sabresd/rootfs_overlay"
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="mx6sabresd"
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
-BR2_TARGET_UBOOT_FORMAT_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-
-# Kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.47"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/freescale/imx6-sabresd/linux_qt5.fragment"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6q-sabresd nxp/imx/imx6dl-sabresd nxp/imx/imx6qp-sabresd"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/freescale/imx6-sabresd/linux_qt5.fragment"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# GL driver
-BR2_PACKAGE_MESA3D=y
-BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y
-BR2_PACKAGE_MESA3D_OPENGL_ES=y
-BR2_PACKAGE_MESA3D_OPENGL_EGL=y
-
-# Fonts
+BR2_PACKAGE_GSTREAMER1=y
+BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC=y
+BR2_PACKAGE_GST1_PLUGINS_GOOD=y
+BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2=y
+BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2_PROBE=y
+BR2_PACKAGE_GST1_PLUGINS_BAD=y
+BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VIDEOPARSERS=y
+BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_KMS=y
 BR2_PACKAGE_BITSTREAM_VERA=y
 BR2_PACKAGE_CANTARELL=y
 BR2_PACKAGE_DEJAVU=y
@@ -59,41 +32,38 @@ BR2_PACKAGE_FONT_AWESOME=y
 BR2_PACKAGE_GHOSTSCRIPT_FONTS=y
 BR2_PACKAGE_INCONSOLATA=y
 BR2_PACKAGE_LIBERATION=y
-
-# GL demos
 BR2_PACKAGE_GLMARK2=y
 BR2_PACKAGE_KMSCUBE=y
-BR2_PACKAGE_LIBV4L=y
-BR2_PACKAGE_LIBV4L_UTILS=y
 BR2_PACKAGE_MESA3D_DEMOS=y
-
-# Qt5
+BR2_PACKAGE_QT5CINEX=y
+BR2_PACKAGE_QT5CINEX_HD=y
+BR2_PACKAGE_MESA3D=y
+BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y
+BR2_PACKAGE_MESA3D_OPENGL_EGL=y
+BR2_PACKAGE_MESA3D_OPENGL_ES=y
 BR2_PACKAGE_QT5=y
 BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
 BR2_PACKAGE_QT5BASE_LINUXFB=y
 BR2_PACKAGE_QT5BASE_FONTCONFIG=y
 BR2_PACKAGE_QT5BASE_GIF=y
 BR2_PACKAGE_QT5BASE_JPEG=y
-BR2_PACKAGE_QT5CINEX=y
-BR2_PACKAGE_QT5CINEX_HD=y
-
-# NXP firmware package
 BR2_PACKAGE_FREESCALE_IMX=y
 BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q=y
 BR2_PACKAGE_FIRMWARE_IMX=y
-
-# libdrm tests
 BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
-
-# gstreamer-1.0
-BR2_PACKAGE_GSTREAMER1=y
-BR2_PACKAGE_GST1_PLUGINS_GOOD=y
-BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2=y
-BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2_PROBE=y
-BR2_PACKAGE_GST1_PLUGINS_BAD=y
-BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VIDEOPARSERS=y
-BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_KMS=y
-BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC=y
-
-# For automatic kernel module loading
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_PACKAGE_LIBV4L=y
+BR2_PACKAGE_LIBV4L_UTILS=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="320M"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6sabresd"
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="SPL"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/imx6slevk_defconfig

@@ -3,9 +3,15 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.51"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6sl-evk"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
@@ -14,14 +20,6 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_IMX=y
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.51"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6sl-evk"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-# required tools to create the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/imx6sx-sdb_defconfig

@@ -3,25 +3,23 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.46"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6sx-sdb nxp/imx/imx6sx-sdb-reva"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6sxsabresd"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.46"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6sx-sdb nxp/imx/imx6sx-sdb-reva"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-# required tools to create the SD card image
+BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/imx6ulevk_defconfig

@@ -1,15 +1,9 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.48"
@@ -17,24 +11,17 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6ul-14x14-evk"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# bootloader
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6ul_14x14_evk"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-
-# required tools to create the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-
-# filesystem / image
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y

configs/imx6ullevk_defconfig

@@ -1,15 +1,10 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.4"
@@ -17,8 +12,11 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6ull-14x14-evk"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# bootloader
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6ull_14x14_evk"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -26,22 +24,6 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_DTB_IMX=y
-
-# required tools to create the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-
-# filesystem / image
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-
-# NXP firmware package for SDMA Firmware
-BR2_PACKAGE_FREESCALE_IMX=y
-BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL=y
-BR2_PACKAGE_FIRMWARE_IMX=y
-
-# For automatic kernel module loading
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-

configs/imx6ulpico_defconfig

@@ -1,56 +1,35 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc5"
-
-# rootfs overlay
 BR2_ROOTFS_OVERLAY="board/technexion/imx6ulpico/rootfs_overlay"
-
-# kernel
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.48"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6ul-pico-pi nxp/imx/imx6ul-pico-hobbit nxp/imx/imx6ul-pico-dwarf"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# wifi firmware for brcm4339 and qca9377
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_PACKAGE_LINUX_FIRMWARE=y
-BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
 BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_10K_QCA9377=y
-
-# For automatic firmware loading
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-
-# wireless packages
+BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
 BR2_PACKAGE_WIRELESS_TOOLS=y
 BR2_PACKAGE_WPA_SUPPLICANT=y
 BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
-
-# bootloader
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="SPL"
 BR2_TARGET_UBOOT_BOARDNAME="pico-pi-imx6ul"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
-
-# required tools to create the eMMC image
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="SPL"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-
-# filesystem / image
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y

configs/imx7d-sdb_defconfig

@@ -1,38 +1,25 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# Kernel
+BR2_ROOTFS_OVERLAY="board/freescale/imx7dsdb/rootfs_overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.21"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx7d-sdb"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# U-Boot
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx7dsabresd"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.07"
 BR2_TARGET_UBOOT_FORMAT_DTB_IMX=y
-
-# Filesystem
-BR2_ROOTFS_OVERLAY="board/freescale/imx7dsdb/rootfs_overlay"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-
-# required tools to create the eMMC image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/imx7dpico_defconfig

@@ -1,51 +1,32 @@
-# architecture
 BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
-
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# system
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc4"
-
-# kernel
+BR2_ROOTFS_OVERLAY="board/technexion/imx7dpico/rootfs_overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.48"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx7d-pico-pi"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_TARGET_UBOOT_BOARDNAME="pico-pi-imx7d"
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
-
-# wifi firmware for brcm43439
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
-
-# For automatic firmware loading
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-
-# wireless packages
 BR2_PACKAGE_WIRELESS_TOOLS=y
 BR2_PACKAGE_WPA_SUPPLICANT=y
 BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
-
-# required tools to create the eMMC image
-BR2_PACKAGE_HOST_GENIMAGE=y
-
-# filesystem / image
-BR2_ROOTFS_OVERLAY="board/technexion/imx7dpico/rootfs_overlay"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="pico-pi-imx7d"
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="SPL"
+BR2_PACKAGE_HOST_GENIMAGE=y

configs/imx8mqevk_defconfig

@@ -28,8 +28,8 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.6.23-2.0.0)/uboot-imx-lf-6.6.23-2.0.0.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mq_evk"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
 BR2_TARGET_UBOOT_SPL=y

configs/imxrt1050-evk_defconfig

@@ -1,41 +1,27 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_m7=y
-
-# Image
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_7=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/imxrt1050evk/genimage.cfg"
-
-# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_7=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.7"
 BR2_LINUX_KERNEL_DEFCONFIG="imxrt"
-BR2_LINUX_KERNEL_ZIMAGE=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imxrt1050-evk"
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="16M"
-
-# Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imxrt1050-evk"
 BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/freescale/imxrt1050evk/uboot.fragment"
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-
-# Required tools to create the SD card image
-BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/khadas_vim3_defconfig

@@ -1,13 +1,9 @@
-# Architecture
 BR2_aarch64=y
 BR2_cortex_a73_a53=y
 BR2_ARM_FPU_VFPV4=y
-
-# Image
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_3=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/khadas/vim3/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/khadas/vim3/post-image.sh"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.3"
@@ -15,33 +11,17 @@ BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="amlogic/meson-g12b-a311d-khadas-vim3"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Linux headers same as kernel, a 6.3 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_3=y
-
-# Filesystem
+BR2_PACKAGE_DOSFSTOOLS=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
-
-# Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="khadas-vim3"
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-
-# Required tool to sign the bootloader image
 BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP=y
-BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE="khadas-vim3"
-
-# Required tools to create the SD image
-BR2_PACKAGE_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-
-# Supporting host tools to build FIT image
-# BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-# BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y

configs/kontron_bl_imx8mm_defconfig

@@ -1,12 +1,10 @@
-# Architecture
 BR2_aarch64=y
-BR2_cortex_a53=y
 BR2_ARM_FPU_VFPV3=y
-
-# System
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc2"
-
-# Kernel
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/kontron/bl-imx8mm/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16"
@@ -16,24 +14,16 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mm-kontron-n801x-s"
 BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y
-
 BR2_PACKAGE_FREESCALE_IMX=y
 BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y
 BR2_PACKAGE_FIRMWARE_IMX=y
-
-# Filesystem / image
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
-
-# Bootloader
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30880000"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
@@ -41,20 +31,13 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron-sl-mx8mm"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
+BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN=y
 BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
-BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
 BR2_TARGET_UBOOT_SPL=y
-
-# Required host tools to create the SD/eMMC image
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/kontron/bl-imx8mm/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg"
 BR2_PACKAGE_HOST_GENIMAGE=y

configs/kontron_pitx_imx8m_defconfig

@@ -1,14 +1,10 @@
-# Architecture
 BR2_aarch64=y
-
-# System
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y
+BR2_GLOBAL_PATCH_DIR="board/kontron/pitx-imx8m/patches"
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc2"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/kontron/pitx-imx8m/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg"
-BR2_GLOBAL_PATCH_DIR="board/kontron/pitx-imx8m/patches"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.17.7"
@@ -18,43 +14,31 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mq-kontron-pitx-imx8m"
 BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y
-
 BR2_PACKAGE_FREESCALE_IMX=y
 BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y
 BR2_PACKAGE_FIRMWARE_IMX=y
-
-# Filesystem / image
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
-
-# Bootloader
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mq"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_pitx_imx8m"
-BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
+BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN=y
 BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
-BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
 BR2_TARGET_UBOOT_SPL=y
-
-# Required host tools to create the SD/eMMC image
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_IMX_MKIMAGE=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y

configs/kontron_smarc_sal28_defconfig

@@ -25,11 +25,10 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
+BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom"

configs/lafrite_defconfig

@@ -1,5 +1,4 @@
 BR2_aarch64=y
-BR2_cortex_a53=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_GLOBAL_PATCH_DIR="board/librecomputer/lafrite/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y

configs/lego_ev3_defconfig

@@ -1,18 +1,10 @@
-# architecture
 BR2_arm=y
-BR2_arm926t=y
-
-# system
-BR2_TARGET_GENERIC_GETTY=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS1"
-BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
 BR2_GLOBAL_PATCH_DIR="board/lego/ev3/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS1"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/lego/ev3/post-image.sh"
-# Linux headers same as kernel, a 4.19 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.315"
@@ -22,30 +14,22 @@ BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0xc0008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="da850-lego-ev3"
-
-# Target packages
 BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/lego/ev3/busybox.fragment"
-BR2_PACKAGE_BLUEZ5_UTILS=y
-BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
-BR2_PACKAGE_BRICKD=y
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_TI_CC2560=y
-
-# filesystem
+BR2_PACKAGE_BRICKD=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
 BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
 # BR2_TARGET_ROOTFS_TAR is not set
-
-# U-Boot
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.07"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="legoev3"
-
-# host
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/linksprite_pcduino_defconfig

@@ -1,63 +1,39 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a8=y
-
-# System settings
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 BR2_TARGET_GENERIC_HOSTNAME="pcduino"
 BR2_TARGET_GENERIC_ISSUE="pcDuino buildroot is ready"
-
-# Serial port config
-BR2_TARGET_GENERIC_GETTY=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-
-# SD image scripts
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/common/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg"
-
-# For kernel modules autoloading
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-
-# Linux headers same as kernel, a 6.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.3"
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/linksprite/pcduino/linux-extras.config"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun4i-a10-pcduino"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/linksprite/pcduino/linux-extras.config"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Filesystem
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
+BR2_PACKAGE_IW=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# U-Boot
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Linksprite_pcDuino"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
-
-# Host packages
 BR2_PACKAGE_HOST_GENIMAGE=y
-
-# Target packages: wireless support for pcduino-lite-wifi
-BR2_PACKAGE_IW=y
-BR2_PACKAGE_WIRELESS_TOOLS=y
-BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
-BR2_PACKAGE_WPA_SUPPLICANT=y
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
-BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
-BR2_PACKAGE_LINUX_FIRMWARE=y
-BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y

configs/ls1028ardb_defconfig

@@ -1,16 +1,8 @@
-# Architecture
 BR2_aarch64=y
 BR2_cortex_a72=y
-
-# Build
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
 BR2_GLOBAL_PATCH_DIR="board/freescale/ls1028ardb/patches board/freescale/common/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# Toolchain
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-
-# System configuration
 BR2_TARGET_GENERIC_HOSTNAME="ls1028a"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
@@ -18,8 +10,6 @@ BR2_SYSTEM_DHCP="eno0"
 BR2_ROOTFS_OVERLAY="board/freescale/ls1028ardb/rootfs_overlay"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1028ardb/genimage.cfg"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,LSDK-21.08)/linux-LSDK-21.08.tar.gz"
@@ -28,24 +18,18 @@ BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.con
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-rdb"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Target package
 BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE=y
-
-# Filesystem
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
-
-# Bootloaders
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,LSDK-21.08)/atf-LSDK-21.08.tar.gz"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_RCW=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_RCW=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=sd"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl"
 BR2_TARGET_UBOOT=y
@@ -54,8 +38,6 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,LSDK-21.08)/u-boot-LSDK-21.08.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1028ardb_tfa"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-
-# Host utilities
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_QORIQ_RCW=y
 BR2_PACKAGE_HOST_QORIQ_RCW_INTREE="ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.bin"

configs/ls1046a-frwy_defconfig

@@ -1,15 +1,7 @@
-# Architecture
 BR2_aarch64=y
 BR2_cortex_a72=y
-
-# patches
-BR2_GLOBAL_PATCH_DIR="board/freescale/common/patches"
-
-# Toolchain
-# Linux headers same as kernel, a 5.10 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-
-# System configuration
+BR2_GLOBAL_PATCH_DIR="board/freescale/common/patches"
 BR2_TARGET_GENERIC_HOSTNAME="ls1046afrwy"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
@@ -17,8 +9,6 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_OVERLAY="board/freescale/ls1046a-frwy/rootfs_overlay"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1046a-frwy/genimage.cfg"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,LSDK-21.08)/linux-LSDK-21.08.tar.gz"
@@ -27,21 +17,18 @@ BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.con
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1046a-frwy freescale/fsl-ls1046a-frwy-sdk"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Filesystem
+BR2_PACKAGE_QORIQ_FM_UCODE=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
-
-# Bootloaders
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,LSDK-21.08)/atf-LSDK-21.08.tar.gz"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1046afrwy"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_RCW=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_RCW=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=sd"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl"
 BR2_TARGET_UBOOT=y
@@ -50,12 +37,6 @@ BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,LSDK-21.08)/u-boot-LSDK-21.08.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1046afrwy_tfa"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-
-# Firmware
-BR2_PACKAGE_QORIQ_FM_UCODE=y
-BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM="ls1046"
-
-# Host utilities
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_QORIQ_RCW=y
 BR2_PACKAGE_HOST_QORIQ_RCW_INTREE="ls1046afrwy/NN_NNQNNPNP_3040_0506/rcw_1600_sdboot.bin"

configs/mender_x86_64_efi_defconfig

@@ -1,42 +1,12 @@
-# Architecture
 BR2_x86_64=y
-
-# Toolchain
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_18=y
-
-# System
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-
-# Required as vda4 doesn't mount on first boot with busybox
 BR2_INIT_SYSV=y
-
-# Required tools to create bootable media
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Bootloader
-BR2_TARGET_GRUB2=y
-BR2_TARGET_GRUB2_X86_64_EFI=y
-# Add mandatory modules from MENDER_GRUBENV_MANDATORY_MODULES
-BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp sleep"
-BR2_TARGET_GRUB2_INSTALL_TOOLS=y
-
-# Required tools to create a mender image
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MENDER_ARTIFACT=y
-
-# Filesystem / image
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
-# BR2_TARGET_ROOTFS_TAR is not set
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_ROOTFS_OVERLAY="board/mender/x86_64/overlay"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/mender/x86_64/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/mender/x86_64/post-image-efi.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="--data-part-size=32M --device-type=buildroot-x86_64 --artifact-name=1.0"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18.14"
@@ -45,8 +15,6 @@ BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/mender/x86_64/linux.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
-
-# Firmware
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9170=y
 BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
@@ -61,19 +29,26 @@ BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000C=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
-BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y
-
-# Packages
-#
-# Use connman so that networking setup is simpler, via connmanctl tool
-# acpid is for seamless power button support
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
 BR2_PACKAGE_ACPID=y
 BR2_PACKAGE_CONNMAN=y
-BR2_PACKAGE_CONNMAN_CLIENT=y
 BR2_PACKAGE_CONNMAN_WIFI=y
+BR2_PACKAGE_CONNMAN_CLIENT=y
 BR2_PACKAGE_MENDER=y
 BR2_PACKAGE_MENDER_GRUBENV=y
 BR2_PACKAGE_MENDER_GRUBENV_DEFINES="board/mender/x86_64/mender_grubenv_defines"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_GRUB2=y
+BR2_TARGET_GRUB2_X86_64_EFI=y
+BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp sleep"
+BR2_TARGET_GRUB2_INSTALL_TOOLS=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MENDER_ARTIFACT=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/minnowboard_max_defconfig

@@ -1,36 +1,22 @@
-# Architecture
 BR2_x86_64=y
 BR2_x86_silvermont=y
-
-# Misc
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
 BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/minnowboard/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/minnowboard/genimage.cfg"
-
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Needed for ethernet
-BR2_PACKAGE_LINUX_FIRMWARE=y
-BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
-
-# Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.11"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/minnowboard/linux.config"
-
-# Bootloader
-BR2_TARGET_GRUB2=y
-BR2_TARGET_GRUB2_X86_64_EFI=y
-
-# Filesystem image
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_GRUB2=y
+BR2_TARGET_GRUB2_X86_64_EFI=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/mx51evk_defconfig

@@ -1,35 +1,10 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a8=y
-
-# Global patches directory and hash check
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx51evk/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-
-# System
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# required tools to create the SD card image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Filesystem
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="mx51evk"
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.218"
@@ -37,3 +12,13 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx51-babbage"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx51evk"
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01"
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/mx53loco_defconfig

@@ -1,32 +1,8 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a8=y
-
-# Linux headers same as kernel, a 6.1 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
-
-# System
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# required tools to create the SD card image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Filesystem
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="mx53loco"
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.01"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.20"
@@ -34,3 +10,14 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx53-qsb imx53-qsrb"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx53loco"
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.01"
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y

configs/mx6cubox_defconfig

@@ -1,24 +1,14 @@
-# Architecture
 BR2_arm=y
 BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-
-# Toolchain
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
-
-# Build
 BR2_GLOBAL_PATCH_DIR="board/solidrun/mx6cubox/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
-
-# System configuration
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 BR2_ROOTFS_OVERLAY="board/solidrun/mx6cubox/rootfs_overlay"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-
-# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.27"
@@ -27,25 +17,18 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6dl-cubox-i nxp/imx/imx6dl-cubox-i-emmc-som-v15 nxp/imx/imx6dl-cubox-i-som-v15 nxp/imx/imx6dl-hummingboard nxp/imx/imx6dl-hummingboard-emmc-som-v15 nxp/imx/imx6dl-hummingboard-som-v15 nxp/imx/imx6q-cubox-i nxp/imx/imx6q-cubox-i-emmc-som-v15 nxp/imx/imx6q-cubox-i-som-v15 nxp/imx/imx6q-hummingboard nxp/imx/imx6q-hummingboard-emmc-som-v15 nxp/imx/imx6q-hummingboard-som-v15"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem images
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Bootloaders
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.04"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mx6cuboxi"
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
-
-# required tools to create the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/mx6sx_udoo_neo_defconfig

@@ -1,14 +1,21 @@
 BR2_arm=y
 BR2_cortex_a9=y
-BR2_GLOBAL_PATCH_DIR="board/udoo/neo/patches"
-BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-# Linux headers same as kernel, a 6.6 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
+BR2_GLOBAL_PATCH_DIR="board/udoo/neo/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/udoo/common/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.43"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6sx-udoo-neo-basic nxp/imx/imx6sx-udoo-neo-full nxp/imx/imx6sx-udoo-neo-extended"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
@@ -19,15 +26,6 @@ BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.43"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6sx-udoo-neo-basic nxp/imx/imx6sx-udoo-neo-full nxp/imx/imx6sx-udoo-neo-extended"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-# required tools to create the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y