Add Memory configuration to U-Boot build, remove some debugging info

target/u-boot/Makefile.in

@@ -42,8 +42,9 @@ define insert_define
 @echo "#ifdef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
 @echo "#undef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
 @echo "#endif" >> $(U_BOOT_INC_CONF_FILE)
-@echo '#define $(strip $(1)) $(2)' >> $(U_BOOT_INC_CONF_FILE)
+@echo '#define $(strip $(1)) $(strip $(subst ",,$(2)))' >> $(U_BOOT_INC_CONF_FILE)
 endef
+#"))
 
 $(DL_DIR)/$(U_BOOT_SOURCE):
 	 $(WGET) -P $(DL_DIR) $(U_BOOT_SITE)/$(U_BOOT_SOURCE)
@@ -80,18 +81,15 @@ $(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied
 
 $(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
 	# Modify configuration header in $(U_BOOT_INC_CONF_FILE)
-	
 	@echo >> $(U_BOOT_INC_CONF_FILE)
 	@echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
 	@echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
 	@echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
+	$(call insert_define, DATE, $(DATE))	
+	$(call insert_define, CONFIG_LOAD_SCRIPTS, 1)
 ifneq ($(strip $(BR2_PROJECT)),"")
 	$(call insert_define, CONFIG_HOSTNAME, $(BR2_PROJECT))
 endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_SERVERIP)),"")
-	$(call insert_define, CONFIG_SERVERIP, $(BR2_TARGET_UBOOT_SERVERIP))
-endif
-
 ifneq ($(strip $(BR2_TARGET_UBOOT_IPADDR)),"")
 	$(call insert_define, CONFIG_IPADDR, $(BR2_TARGET_UBOOT_IPADDR))
 ifneq ($(strip $(BR2_TARGET_UBOOT_GATEWAY)),"")
@@ -101,21 +99,50 @@ ifneq ($(strip $(BR2_TARGET_UBOOT_NETMASK)),"")
 	$(call insert_define, CONFIG_NETMASK, $(BR2_TARGET_UBOOT_NETMASK))
 endif
 endif # end BR2_TARGET_U_BOOT_IPADDR
-
+ifneq ($(strip $(BR2_TARGET_UBOOT_SERVERIP)),"")
+	$(call insert_define, CONFIG_SERVERIP, $(BR2_TARGET_UBOOT_SERVERIP))
+endif
 ifneq ($(strip $(BR2_TARGET_UBOOT_ETHADDR)),"")
 	$(call insert_define, CONFIG_ETHADDR, $(BR2_TARGET_UBOOT_ETHADDR))
 endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),)
 ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),"")
-	$(call insert_define, CONFIG_ETH2ADDR, $(BR2_TARGET_UBOOT_ETH1ADDR))
+	$(call insert_define, CONFIG_ETH1ADDR, $(BR2_TARGET_UBOOT_ETH1ADDR))
 endif
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_BOOTARGS)),)
 ifneq ($(strip $(BR2_TARGET_UBOOT_BOOTARGS)),"")
 	$(call insert_define, CONFIG_BOOTARGS, $(BR2_TARGET_UBOOT_BOOTARGS))
 endif
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_BOOTCMD)),)
 ifneq ($(strip $(BR2_TARGET_UBOOT_BOOTCMD)),"")
 	$(call insert_define, CONFIG_BOOTCOMMAND, $(BR2_TARGET_UBOOT_BOOTCMD))
 endif
+endif
 ifeq ($(BR2_TARGET_UBOOT_SILENT),y)
 	$(call insert_define, CONFIG_SILENT_CONSOLE,)
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_KERNEL_START)),"")
+	$(call insert_define, KERNEL_START, $(BR2_TARGET_UBOOT_KERNEL_START))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_KERNEL_LOCATION)),"")
+	$(call insert_define, KERNEL_LOCATION, $(BR2_TARGET_UBOOT_KERNEL_LOCATION))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_START)),"")
+	$(call insert_define, FILESYSTEM_START, $(BR2_TARGET_UBOOT_FILESYSTEM_START))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_LOCATION)),"")
+	$(call insert_define, FILESYSTEM_LOCATION, $(BR2_TARGET_UBOOT_FILESYSTEM_LOCATION))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_SIZE)),"")
+	$(call insert_define, FILESYSTEM_SIZE, $(BR2_TARGET_UBOOT_FILESYSTEM_SIZE))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_END_OF_FLASH)),"")
+	$(call insert_define, END_OF_FLASH, $(BR2_TARGET_UBOOT_END_OF_FLASH))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_MEMORY_SIZE)),"")
+	$(call insert_define, MEMORY_SIZE, $(BR2_TARGET_UBOOT_MEMORY_SIZE))
 endif
 	@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
 	touch $@
@@ -162,6 +189,10 @@ u-boot-dirclean:
 
 u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
 
+u-boot-unpacked: $(U_BOOT_DIR)/.patched
+
+u-boot-configured: $(U_BOOT_DIR)/.header_modified
+
 #############################################################
 #
 # Toplevel Makefile options
@@ -186,13 +217,6 @@ u-boot-status:
 	@echo BR2_TARGET_UBOOT_BOOTARGS = $(BR2_TARGET_UBOOT_BOOTARGS)
 	@echo BR2_TARGET_UBOOT_BOOTCMD = $(BR2_TARGET_UBOOT_BOOTCMD)
 	@echo BR2_TARGET_UBOOT_SILENT = $(BR2_TARGET_UBOOT_SILENT)
-	@echo BR2_BOOTSOURCE=$(BR2_BOOTSOURCE)
-	@echo BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD=$(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD)
-	@echo BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH=$(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH)
-	@echo BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH=$(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH)
-	@echo BR2_TARGET_UBOOT_BOOTSOURCE_FLASH=$(BR2_TARGET_UBOOT_BOOTSOURCE_FLASH)
-	@echo BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD=$(BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD)
-	@echo BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM=$(BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM)
 	@echo UBOOT_BOARD_NAME=$(UBOOT_BOARD_NAME)
 	@echo TEST=$(TEST)
 	@exit 0