rework the default x86 target

defconfig

@@ -54,7 +54,7 @@ BR2_JLEVEL=5
 # BR2_KERNEL_HEADERS_2_6_9 is not set
 # BR2_KERNEL_HEADERS_2_6_11 is not set
 BR2_KERNEL_HEADERS_2_6_12=y
-# BR2_KERNEL_HEADERS_2_6_19 is not set
+# BR2_KERNEL_HEADERS_2_6_19_1 is not set
 BR2_DEFAULT_KERNEL_HEADERS="2.6.12"
 
 #
@@ -205,7 +205,7 @@ BR2_PACKAGE_DHCP_CLIENT=y
 # BR2_PACKAGE_DMRAID is not set
 # BR2_PACKAGE_DNSMASQ is not set
 BR2_PACKAGE_DROPBEAR=y
-# BR2_PACKAGE_DROPBEAR_URANDOM is not set
+BR2_PACKAGE_DROPBEAR_URANDOM=y
 # BR2_PACKAGE_ETHTOOL is not set
 # BR2_PACKAGE_EXPAT is not set
 # BR2_PACKAGE_E2FSPROGS is not set
@@ -242,7 +242,7 @@ BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_LINKS is not set
 # BR2_PACKAGE_LRZSZ is not set
 # BR2_PACKAGE_LSOF is not set
-BR2_PACKAGE_LTP-TESTSUITE=y
+# BR2_PACKAGE_LTP-TESTSUITE is not set
 # BR2_PACKAGE_LTT is not set
 # BR2_PACKAGE_LVM2 is not set
 # BR2_PACKAGE_LZO is not set

target/device/x86/i386/Makefile.in

@@ -1,33 +1,5 @@
 X86_I386_PATH=target/device/x86/i386
 
 BR2_PACKAGE_BUSYBOX_CONFIG=$(X86_I386_PATH)/busybox.config
-UCLIBC_CONFIG_FILE=$(TOOL_BUILD_DIR)/uClibc.config.$(ARCH)
-
-#TARGET_SKELETON=$(X86_I386_PATH)/skel.tar.gz
-#TARGET_SKEL_DIR=$(X86_I386_PATH)/target_skeleton
-#TARGET_DEVICE_TABLE=$(X86_I386_PATH)/device_table.txt
-
-TARGETS+=linux
-
-uclibc_config_file_prep::
-	cp toolchain/uClibc/uClibc-$(UCLIBC_VER).config $(UCLIBC_CONFIG_FILE)
-	/bin/echo "ARCH_LITTLE_ENDIAN=y" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# ARCH_BIG_ENDIAN is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_GENERIC_386 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_386 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_486 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "CONFIG_586=y" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_586MMX is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_686 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_PENTIUMII is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_PENTIUMIII is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_PENTIUM4 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_K6 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_K7 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_ELAN is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_CRUSOE is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_WINCHIPC6 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_WINCHIP2 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_CYRIXIII is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_NEHEMIAH is not set" >> $(UCLIBC_CONFIG_FILE)
 
+TARGETS+=linux26

target/device/x86/i386/linux.mk

@@ -1,126 +1,114 @@
 #############################################################
 #
-# Linux kernel targets
-#
-# Note:  If you have any patches to apply, create the directory
-# sources/kernel-patches and put your patches in there and number
-# them in the order you wish to apply them...  i.e.
-#
-#   sources/kernel-patches/001-my-special-stuff.bz2
-#   sources/kernel-patches/003-gcc-Os.bz2
-#   sources/kernel-patches/004_no-warnings.bz2
-#   sources/kernel-patches/030-lowlatency-mini.bz2
-#   sources/kernel-patches/031-lowlatency-fixes-5.bz2
-#   sources/kernel-patches/099-shutup.bz2
-#   etc...
-#
-# these patches will all be applied by the patch-kernel.sh
-# script (which will also abort the build if it finds rejects)
-#  -Erik
+# Linux kernel 2.6 target
 #
 #############################################################
-ifneq ($(filter $(TARGETS),linux),)
+ifneq ($(filter $(TARGETS),linux26),)
+
+
+# Version of Linux to download and then apply patches to
+DOWNLOAD_LINUX26_VERSION=2.6.19.1
+# Version of Linux after applying any patches
+LINUX26_VERSION=2.6.19.1
 
-LINUX_VERSION=$(LINUX_HEADERS_VERSION)
-# File name for the Linux kernel binary
-LINUX_KERNEL=linux-kernel-$(LINUX_VERSION)-$(KERNEL_ARCH).srec
 
 
+LINUX26_SOURCE=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
+LINUX26_SITE=http://ftp.kernel.org/pub/linux/kernel/v2.6
+
+#LINUX26_FORMAT=vmlinux
+#LINUX26_BINLOC=$(LINUX26_FORMAT)
+LINUX26_FORMAT=bzImage
+LINUX26_BINLOC=arch/i386/boot/$(LINUX26_FORMAT)
+
 # Linux kernel configuration file
-LINUX_KCONFIG=$(X86_I386_PATH)/linux.config
+LINUX26_KCONFIG=$(X86_I386_PATH)/linux26.config
+
+# File name for the Linux kernel binary
+LINUX26_KERNEL=linux-kernel-$(LINUX26_VERSION)-$(KERNEL_ARCH)
+
+# Version of Linux AFTER patches
+LINUX26_DIR=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
 
 # kernel patches
-LINUX_PATCH_DIR=target/device/x86/i386/kernel-patches/
-
-LINUX_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) PATH=$(TARGET_PATH) \
-	INSTALL_MOD_PATH=$(TARGET_DIR) \
-
-LINUX_FORMAT=vmlinux
-
-LINUX_BINLOC=$(LINUX_FORMAT)
-##LINUX_DIR=$(BUILD_DIR)/linux-$(LINUX_VERSION)
-##LINUX_SOURCE=linux-$(DOWNLOAD_LINUX_VERSION).tar.bz2
-##LINUX_SITE=http://www.kernel.org/pub/linux/kernel/v2.6
-# Used by pcmcia-cs and others
-LINUX_DIR=$(LINUX_HEADERS_UNPACK_DIR)
-
-
-#$(DL_DIR)/$(LINUX_SOURCE):
-#	-mkdir -p $(DL_DIR)
-#	$(WGET) -P $(DL_DIR) $(LINUX_SITE)/$(LINUX_SOURCE)
-
-#$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE)
-#	-mkdir -p $(TOOL_BUILD_DIR)
-#	-(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX_DIR) linux)
-#	$(LINUX_HEADERS_CAT) $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-#ifneq ($(DOWNLOAD_LINUX_VERSION),$(LINUX_VERSION))
-#	# Rename the dir from the downloaded version to the AFTER patch version
-#	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX_VERSION) $(BUILD_DIR)/linux-$(LINUX_VERSION)
-#endif
-#	[ -d $(LINUX_PATCH_DIR) && toolchain/patch-kernel.sh $(LINUX_DIR) $(LINUX_PATCH_DIR)
-#	touch $(LINUX_DIR)/.unpacked
-
-$(LINUX_KCONFIG):
-	@if [ ! -f "$(LINUX_KCONFIG)" ] ; then \
+LINUX26_PATCH_DIR=target/device/x86/i386/kernel-patches/
+
+LINUX26_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) \
+	PATH=$(TARGET_PATH) INSTALL_MOD_PATH=$(TARGET_DIR) \
+	CROSS_COMPILE=$(KERNEL_CROSS)
+
+
+
+
+$(DL_DIR)/$(LINUX26_SOURCE):
+	 $(WGET) -P $(DL_DIR) $(LINUX26_SITE)/$(LINUX26_SOURCE)
+
+$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
+	rm -rf $(LINUX26_DIR)
+	bzcat $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
+	# Rename the dir from the downloaded version to the AFTER patch version
+	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(BUILD_DIR)/linux-$(LINUX26_VERSION)
+endif
+	touch $(LINUX26_DIR)/.unpacked
+
+$(LINUX26_KCONFIG):
+	@if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \
 		echo ""; \
 		echo "You should create a .config for your kernel"; \
-		echo "and install it as $(LINUX_KCONFIG)"; \
+		echo "and install it as $(LINUX26_KCONFIG)"; \
 		echo ""; \
 		sleep 5; \
 	fi;
 
-#$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured:  $(LINUX_DIR)/.unpacked  $(LINUX_KCONFIG)
-$(LINUX_DIR)/.configured:  $(LINUX_DIR)/.patched  $(LINUX_KCONFIG)
-	-cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
-	$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) oldconfig
-	touch $(LINUX_DIR)/.configured
+$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked
+	#toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR)
+	touch $(LINUX26_DIR)/.patched
 
-linux-menuconfig: $(LINUX_DIR)/.patched
-	[ -f $(LINUX_DIR)/.config ] || cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
-	$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) menuconfig
-	-[ -f $(LINUX_DIR)/.config ] && touch $(LINUX_DIR)/.configured
+$(LINUX26_DIR)/.configured:  $(LINUX26_DIR)/.patched  $(LINUX26_KCONFIG)
+	-cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
+	touch $(LINUX26_DIR)/.configured
 
-$(LINUX_DIR)/.depend_done:  $(LINUX_DIR)/.patched
-	$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) prepare
-	touch $(LINUX_DIR)/.depend_done
+linux26-menuconfig: $(LINUX26_DIR)/.patched
+	[ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
+	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
 
-$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done
-	$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) $(LINUX_FORMAT) bzImage
-	$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) modules
-	[ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot
-	cp -a $(LINUX_DIR)/arch/$(KERNEL_ARCH)/boot/bzImage $(LINUX_DIR)/System.map $(TARGET_DIR)/boot/
+$(LINUX26_DIR)/.depend_done:  $(LINUX26_DIR)/.configured
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
+	touch $(LINUX26_DIR)/.depend_done
 
-$(LINUX_KERNEL): $(LINUX_DIR)/$(LINUX_BINLOC)
-	$(KERNEL_CROSS)objcopy -O srec $(LINUX_DIR)/$(LINUX_BINLOC) $(LINUX_KERNEL)
-	touch -c $(LINUX_KERNEL)
+$(LINUX26_KERNEL): $(LINUX26_DIR)/.depend_done
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(LINUX26_FORMAT) bzImage
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
+	cp -fa $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
+	touch -c $(LINUX26_KERNEL)
 
-$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep: $(LINUX_KERNEL)
-	rm -rf $(TARGET_DIR)/lib/modules
+$(TARGET_DIR)/boot/$(LINUX26_BINLOC): $(LINUX26_KERNEL)
+	[ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot
+	cp -a $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_DIR)/System.map $(TARGET_DIR)/boot/
+	touch -c $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
+
+$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_KERNEL)
+	rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
 	rm -f $(TARGET_DIR)/sbin/cardmgr
-	$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) DEPMOD=`which true` \
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
+		DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod \
 		INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
-	(cd $(TARGET_DIR)/lib/modules; ln -s $(LINUX_VERSION)/kernel/drivers .)
-	$(TARGET_DEVICE_DEPMOD) \
-		-b $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/ \
-		-k $(LINUX_DIR)/vmlinux \
-		-F $(LINUX_DIR)/System.map \
-		> $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep
-
-$(STAGING_DIR)/include/linux/version.h: $(LINUX_DIR)/.configured
-	mkdir -p $(STAGING_DIR)/include
-	tar -ch -C $(LINUX_DIR)/include -f - linux | tar -xf - -C $(STAGING_DIR)/include/
-	tar -ch -C $(LINUX_DIR)/include -f - asm | tar -xf - -C $(STAGING_DIR)/include/
+	rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build
+	touch -c $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
 
-linux: $(STAGING_DIR)/include/linux/version.h $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep
+linux26: cross-depmod26 $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
 
-linux-source: $(DL_DIR)/$(LINUX_SOURCE)
+linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
 
 # This has been renamed so we do _NOT_ by default run this on 'make clean'
-linuxclean:
-	rm -f $(LINUX_KERNEL)
-	-$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) clean
+linux26clean:
+	rm -f $(LINUX26_KERNEL)
+	-$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
 
-linux-dirclean:
-	rm -rf $(LINUX_DIR)
+linux26-dirclean:
+	rm -rf $(LINUX26_DIR)
 
 endif