fs/ext2: use the new mke2img host package

And get rid of the old genext2fs.sh wrapper.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fs/ext2/ext2.mk

@@ -4,27 +4,24 @@
 #
 ################################################################################
 
-EXT2_OPTS :=
+EXT2_OPTS = -G $(BR2_TARGET_ROOTFS_EXT2_GEN) -R $(BR2_TARGET_ROOTFS_EXT2_REV)
 
 ifneq ($(strip $(BR2_TARGET_ROOTFS_EXT2_BLOCKS)),0)
 EXT2_OPTS += -b $(BR2_TARGET_ROOTFS_EXT2_BLOCKS)
 endif
 
 ifneq ($(strip $(BR2_TARGET_ROOTFS_EXT2_INODES)),0)
-EXT2_OPTS += -N $(BR2_TARGET_ROOTFS_EXT2_INODES)
+EXT2_OPTS += -i $(BR2_TARGET_ROOTFS_EXT2_INODES)
 endif
 
 ifneq ($(strip $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)),0)
-EXT2_OPTS += -m $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)
+EXT2_OPTS += -r $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)
 endif
 
-ROOTFS_EXT2_DEPENDENCIES = host-genext2fs host-e2fsprogs
-
-EXT2_ENV = GEN=$(BR2_TARGET_ROOTFS_EXT2_GEN)
-EXT2_ENV += REV=$(BR2_TARGET_ROOTFS_EXT2_REV)
+ROOTFS_EXT2_DEPENDENCIES = host-mke2img
 
 define ROOTFS_EXT2_CMD
-	PATH=$(BR_PATH) $(EXT2_ENV) fs/ext2/genext2fs.sh -d $(TARGET_DIR) $(EXT2_OPTS) $@
+	PATH=$(BR_PATH) mke2img -d $(TARGET_DIR) $(EXT2_OPTS) -o $@
 endef
 
 rootfs-ext2-symlink:

fs/ext2/genext2fs.sh

@@ -1,121 +0,0 @@
-#!/bin/sh
-# genext2fs wrapper calculating needed blocks/inodes values if not specified
-set -e
-
-export LC_ALL=C
-
-CALC_BLOCKS=1
-CALC_INODES=1
-EXT_OPTS=
-EXT_OPTS_O=
-
-while getopts x:d:D:b:i:N:m:g:e:zfqUPhVv f
-do
-    case $f in
-	b) CALC_BLOCKS=0 ;;
-	N) CALC_INODES=0; INODES=$OPTARG ;;
-	d) TARGET_DIR=$OPTARG ;;
-    esac
-done
-eval IMG="\"\${${OPTIND}}\""
-
-# calculate needed inodes
-if [ $CALC_INODES -eq 1 ];
-then
-    INODES=$(find $TARGET_DIR | wc -l)
-    INODES=$(expr $INODES + 400)
-    set -- $@ -N $INODES
-fi
-
-# calculate needed blocks
-if [ $CALC_BLOCKS -eq 1 ];
-then
-    # size ~= superblock, block+inode bitmaps, inodes (8 per block), blocks
-    # we scale inodes / blocks with 10% to compensate for bitmaps size + slack
-    BLOCKS=$(du -s -c -k $TARGET_DIR | grep total | sed -e "s/total//")
-    BLOCKS=$(expr 500 + \( $BLOCKS + $INODES / 8 \) \* 11 / 10)
-    # we add 1300 blocks (a bit more than 1 MiB, assuming 1KiB blocks) for
-    # the journal if ext3/4
-    # Note: I came to 1300 blocks after trial-and-error checks. YMMV.
-    if [ ${GEN} -ge 3 ]; then
-        BLOCKS=$(expr 1300 + $BLOCKS )
-    fi
-    set -- $@ -b $BLOCKS
-fi
-
-e2tunefsck() {
-    # genext2fs does not generate a UUID, but fsck will whine if one is
-    # is missing, so we need to add a UUID.
-    # Of course, this has to happend _before_ we run fsck.
-    # Also, some ext4 metadata are based on the UUID, so we must
-    # set it before we can convert the filesystem to ext4.
-    # Although a random UUID may seem bad for reproducibility, there
-    # already are so many things that are not reproducible in a
-    # filesystem: file dates, file ordering, content of the files...
-    tune2fs -U random "${IMG}"
-
-    # Upgrade the filesystem
-    if [ $# -ne 0 ]; then
-        tune2fs "$@" "${IMG}"
-    fi
-
-    # After changing filesystem options, running fsck is required
-    # (see: man tune2fs). Running e2fsck in other cases will ensure
-    # coherency of the filesystem, although it is not required.
-    # 'e2fsck -pDf' means:
-    #  - automatically repair
-    #  - optimise and check for duplicate entries
-    #  - force checking
-    # Sending output to oblivion, as e2fsck can be *very* verbose,
-    # especially with filesystems generated by genext2fs.
-    # Exit codes 1 & 2 are OK, it means fs errors were successfully
-    # corrected, hence our little trick with $ret.
-    ret=0
-    e2fsck -pDf "${IMG}" >/dev/null || ret=$?
-    case ${ret} in
-       0|1|2) ;;
-       *)   exit ${ret};;
-    esac
-    printf "\ne2fsck was successfully run on '%s' (ext%d)\n\n"  \
-           "${IMG##*/}" "${GEN}"
-
-    # Remove count- and time-based checks, they are not welcome
-    # on embedded devices, where they can cause serious boot-time
-    # issues by tremendously slowing down the boot.
-    tune2fs -c 0 -i 0 "${IMG}"
-}
-
-# Check we know what generation to generate
-case "${GEN}:${REV}" in
-    2:0|2:1|3:1|4:1)
-	;;
-    *)
-	printf "%s: unknown ext generation '%s' and/or revision '%s'\n" \
-	       "${0##*/}" "${GEN}" "${REV}" >&2
-	exit 1
-	;;
-esac
-
-# Upgrade to rev1 if needed
-if [ ${REV} -ge 1 ]; then
-    EXT_OPTS_O="${EXT_OPTS_O},filetype"
-fi
-
-# Add a journal for ext3 and above
-if [ ${GEN} -ge 3 ]; then
-    EXT_OPTS="${EXT_OPTS} -j -J size=1"
-fi
-
-# Add ext4 specific features
-if [ ${GEN} -ge 4 ]; then
-    EXT_OPTS_O="${EXT_OPTS_O},extents,uninit_bg,dir_index"
-fi
-
-# Add our -O options (there will be at most one leading comma, remove it)
-if [ -n "${EXT_OPTS_O}" ]; then
-    EXT_OPTS="${EXT_OPTS} -O ${EXT_OPTS_O#,}"
-fi
-
-# Generate and upgrade the filesystem
-genext2fs "$@"
-e2tunefsck ${EXT_OPTS}