configs/icnova-a20-adb4006: bump Linux and U-Boot version

Bump version of Linux to 6.6.14 and U-Boot to 2024.01
and also use upstream configs and dts.

Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006.dts

@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-// Copyright (C) 2023 In-Circuit GmbH
-
-/dts-v1/;
-
-#include "sun7i-a20-icnova-a20.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "In-Circuit ICnova A20 ADB4006";
-	compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
-		     "allwinner,sun7i-a20";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&hdmi_out_con>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_YELLOW>;
-			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
-			default-state = "on";
-		};
-
-		led-1 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&ahci {
-	target-supply = <&reg_ahci_5v>;
-	status = "okay";
-};
-
-&codec {
-	status = "okay";
-};
-
-&de {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_out {
-	hdmi_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
-	};
-};
-
-&mmc0 {
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&otg_sram {
-	status = "okay";
-};
-
-&reg_ahci_5v {
-	status = "okay";
-};
-
-&ac_power_supply {
-	status = "okay";
-};
-
-&reg_usb1_vbus {
-	status = "okay";
-};
-
-&reg_usb2_vbus {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pb_pins>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbphy {
-	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-	usb1_vbus-supply = <&reg_usb1_vbus>;
-	usb2_vbus-supply = <&reg_usb2_vbus>;
-	status = "okay";
-};

board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006_uboot_defconfig

@@ -1,20 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-a20-adb4006"
-CONFIG_SPL=y
-CONFIG_MACH_SUN7I=y
-CONFIG_DRAM_CLK=384
-CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_SYS_I2C_SLAVE=0x7f
-CONFIG_SYS_I2C_SPEED=400000
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_SUN7I_GMAC=y
-CONFIG_AXP_ALDO4_VOLT=2800
-CONFIG_SCSI=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y

board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20.dtsi

@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-// Copyright (C) 2023 In-Circuit GmbH
-
-#include "sun7i-a20.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&gmac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_mii_pins>;
-	phy-handle = <&phy1>;
-	phy-mode = "mii";
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&gmac_mdio {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-#include "axp209.dtsi"
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-int-dll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};

configs/icnova-a20-adb4006_defconfig

@@ -2,8 +2,8 @@ BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
 
-# Linux headers same as kernel, a 6.1 LTS series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+# Linux headers same as kernel, a 6.6 LTS series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 
 # System
 BR2_TARGET_GENERIC_HOSTNAME="ICnova A20 ADB4006"
@@ -20,11 +20,11 @@ BR2_PACKAGE_HOST_MTOOLS=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.14"
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/in-circuit/icnova-a20-adb4006/linux.fragment"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20.dtsi board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006.dts"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun7i-a20-icnova-a20-adb4006"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 
 # Filesystem
@@ -36,15 +36,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
-BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE="board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006_uboot_defconfig"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="icnova-a20-adb4006"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
-BR2_TARGET_UBOOT_CUSTOM_DTS_PATH="board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20.dtsi board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006.dts"
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/in-circuit/icnova-a20-adb4006/boot.cmd"