engicam: icorem6: Add OF C.TOUCH 10.1 Kit

This patch add support for Open Frame C.TOUCH 10.1 Kit.

Since the defconfig is no longer only for the starter kit, remove that
from BR2_TARGET_GENERIC_ISSUE.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

board/engicam/icorem6/genimage.cfg

@@ -3,7 +3,8 @@ image boot.vfat {
 		files = {
 			"uImage",
 			"imx6dl-icore.dtb",
-			"imx6q-icore.dtb"
+			"imx6q-icore.dtb",
+			"imx6q-icore-ofcap10.dtb"
 		}
 	}
 	size = 64M

board/engicam/icorem6/readme.txt

@@ -7,6 +7,8 @@ platform boards.
 
 i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits:
 https://www.engicam.com/vis-prod/101120
+i.CoreM6 Quad/Dual/DualLite/Solo Open Frame 10.1 C.TOUCH kits:
+https://www.engicam.com/vis-prod/101133
 
 This configuration uses U-Boot mainline and kernel mainline.
 
@@ -28,6 +30,8 @@ You will find the following files in output/images/:
   - imx6q-icore.dtb
 - for i.CoreM6 DualLite/Solo:
   - imx6dl-icore.dtb
+- for i.CoreM6 Quad/Dual ofcap 10:
+  - imx6q-icore-ofcap10.dtb
   - rootfs.ext4
   - rootfs.tar
   - sdcard.img

configs/engicam_imx6qdl_icore_defconfig

@@ -30,10 +30,10 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore imx6q-icore-ofcap10"
 
 # Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo Starter Kit"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_PACKAGE_HOST_DOSFSTOOLS=y