configs/raspberrypi: change deprecated pi3-miniuart-bt option to miniuart-bt

The pi3-minuart-bt Device Tree overlay has been renamed to
miniuart-bt, as it is useful/usable for other platforms than the
RPi3. So we use this DT overlay and rename the
--add-pi3-miniuart-bt-overlay option to --add-miniuart-bt-overlay
accordingly.

Signed-off-by: Arthur Courtel <arthur.courtel@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/raspberrypi/post-image.sh

@@ -10,13 +10,13 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
 for arg in "$@"
 do
 	case "${arg}" in
-		--add-pi3-miniuart-bt-overlay)
+		--add-miniuart-bt-overlay)
 		if ! grep -qE '^dtoverlay=' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
-			echo "Adding 'dtoverlay=pi3-miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
+			echo "Adding 'dtoverlay=miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
 			cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
 
-# fixes rpi3 ttyAMA0 serial console
-dtoverlay=pi3-miniuart-bt
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
 __EOF__
 		fi
 		;;

board/raspberrypi/readme.txt

@@ -78,7 +78,7 @@ After building, you should obtain this tree:
 [1] Not all of them will be present, depending on the RaspberryPi
     model you are using.
 
-[2] Only for the Raspberry Pi 3/4 Models (overlay pi3-miniuart-bt is needed
+[2] Only for the Raspberry Pi 3/4 Models (overlay miniuart-bt is needed
     to enable the RPi3 serial console otherwise occupied by the bluetooth
     chip). Alternative would be to disable the serial console in cmdline.txt
     and /etc/inittab.

configs/raspberrypi3_64_defconfig

@@ -35,4 +35,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--aarch64 --add-pi3-miniuart-bt-overlay"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--aarch64 --add-miniuart-bt-overlay"

configs/raspberrypi3_defconfig

@@ -34,4 +34,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"

configs/raspberrypi3_qt5we_defconfig

@@ -48,4 +48,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="360M"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay --gpu_mem_1024=200"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay --gpu_mem_1024=200"

configs/raspberrypi4_defconfig

@@ -35,4 +35,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"