Update defconfigs with new VCS config options

Signed-off-by: Maxime Petazzoni <maxime.petazzoni@bulix.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/arm_toolchain_defconfig

@@ -131,9 +131,8 @@ BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91rm9200df_defconfig

@@ -136,9 +136,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KER
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91rm9200df_ext_bare_defconfig

@@ -131,9 +131,8 @@ BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91rm9200df_ext_defconfig

@@ -142,9 +142,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KER
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9260dfc_defconfig

@@ -149,9 +149,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KER
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9260dfc_ext_bare_defconfig

@@ -131,9 +131,8 @@ BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9260dfc_ext_defconfig

@@ -150,9 +150,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KER
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9261ek_defconfig

@@ -152,9 +152,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KER
 # Build options
 #
 BR2_WGET="wget --passive-ftp"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9261ek_ext_bare_defconfig

@@ -134,9 +134,8 @@ BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9261ek_ext_defconfig

@@ -153,9 +153,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KER
 # Build options
 #
 BR2_WGET="wget --passive-ftp"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9263ek_defconfig

@@ -150,9 +150,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KER
 # Build options
 #
 BR2_WGET="wget --passive-ftp"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9263ek_ext_bare_defconfig

@@ -133,9 +133,8 @@ BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9263ek_ext_defconfig

@@ -152,9 +152,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KER
 # Build options
 #
 BR2_WGET="wget --passive-ftp"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9g20dfc_defconfig

@@ -150,9 +150,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KER
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9g20dfc_ext_bare_defconfig

@@ -131,9 +131,8 @@ BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/at91sam9g20dfc_ext_defconfig

@@ -150,9 +150,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KER
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/atngw100-base_defconfig

@@ -84,9 +84,8 @@ BR2_TARGET_AVR32_ATNGW100_BASE=y
 # Build options
 #
 BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="zcat"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/atngw100_defconfig

@@ -69,11 +69,10 @@ BR2_TARGET_AVR32_ATNGW100=y
 # Commands
 #
 BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
+BR2_SVN="svn"
 BR2_BZR_CO="bzr co"
 BR2_BZR_UP="bzr up"
-BR2_GIT="git clone"
+BR2_GIT="git"
 BR2_ZCAT="zcat"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/atstk1005_defconfig

@@ -82,9 +82,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-avr32/kernel-patches-$(BR2_K
 # Build options
 #
 BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="zcat"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/atstk100x_defconfig

@@ -83,9 +83,8 @@ BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-avr32/kernel-patches-$(BR2_K
 # Build options
 #
 BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="zcat"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/i386_defconfig

@@ -85,9 +85,8 @@ BR2_TARGET_I686=y
 # Build options
 #
 BR2_WGET="wget --passive-ftp"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/i686_defconfig

@@ -85,9 +85,8 @@ BR2_TARGET_I686=y
 # Build options
 #
 BR2_WGET="wget --passive-ftp"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/integrator926_defconfig

@@ -81,9 +81,8 @@ BR2_BOARD_PATH="target/device/ARMLTD/$(BR2_BOARD_NAME)"
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/integrator926_huge_defconfig

@@ -81,9 +81,8 @@ BR2_BOARD_PATH="target/device/ARMLTD/$(BR2_BOARD_NAME)"
 # Build options
 #
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/kb9202_defconfig

@@ -92,9 +92,8 @@ BR2_TARGET_ARM=y
 #
 BR2_PRIMARY_SITE=""
 BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="gzip -d -c"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""

configs/v100sc2_defconfig

@@ -63,9 +63,8 @@ BR2_TARGET_VALKA_V100SC2=y
 #
 BR2_PRIMARY_SITE=""
 BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
+BR2_SVN="svn"
+BR2_GIT="git"
 BR2_ZCAT="zcat"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""