- revert part of 20119 (renaming BR2_ARM_.ABI to BR2_.ABI)

target/Config.in.arch

@@ -111,13 +111,13 @@ config BR2_ARM_TYPE
 choice
 	prompt "Target ABI"
 	depends BR2_arm || BR2_armeb
-	default BR2_OABI
+	default BR2_ARM_OABI
 	help
 	  Application Binary Interface to use
 
-config BR2_OABI
+config BR2_ARM_OABI
 	bool "OABI"
-config BR2_EABI
+config BR2_ARM_EABI
 	bool "EABI"
 endchoice
 
@@ -150,15 +150,15 @@ endchoice
 choice
 	prompt "Target ABI"
 	depends BR2_mips || BR2_mipsel
-	default BR2_EABI
+	default BR2_MIPS_EABI
 	help
 	  Application Binary Interface to use
 
-config BR2_OABI
+config BR2_MIPS_OABI
 	bool "OABI"
-config BR2_EABI
+config BR2_MIPS_EABI
 	bool "EABI"
-config BR2_ABI64
+config BR2_MIPS_ABI64
 	bool "N64"
 endchoice
 
@@ -683,17 +683,17 @@ config BR2_GCC_TARGET_ABI
 	default aapcs		if BR2_arm_dunno
 	default aapcs-linux	if BR2_arm_dunno
 	default iwmmxt		if BR2_iwmmxt
-	default 32		if (BR2_mipsel || BR2_arm) && BR2_OABI
-	default n32		if BR2_mipsel && BR2_EABI
-	default o64		if BR2_mips && BR2_OABI
-	default eabi		if (BR2_mips || BR2_arm) && BR2_EABI
-	default 64		if BR2_mips && BR2_ABI64
-	default mmixware	if BR2_mmix && BR2_ABI_native
-	default gnu		if BR2_mmix && !BR2_ABI_native
-	default altivec		if BR2_powerpc && BR2_ABI_altivec
-	default no-altivec	if BR2_powerpc && BR2_ABI_no-altivec
-	default spe		if BR2_powerpc && BR2_ABI_spe
-	default no-spe		if BR2_powerpc && BR2_ABI_no-spe
-	default ibmlongdouble	if BR2_powerpc && BR2_ABI_ibmlongdouble
-	default ieeelongdouble	if BR2_powerpc && BR2_ABI_ieeelongdouble
+	default 32		if BR2_mipsel && BR2_MIPS_OABI
+	default n32		if BR2_mipsel && BR2_MIPS_EABI
+	default o64		if BR2_mips && BR2_MIPS_OABI
+	default eabi		if BR2_mips && BR2_MIPS_EABI
+	default 64		if BR2_mips && BR2_MIPS_ABI64
+	default mmixware	if BR2_mmix && BR2_MMIX_ABI_native
+	default gnu		if BR2_mmix && !BR2_MMIX_ABI_native
+	default altivec		if BR2_powerpc && BR2_PPC_ABI_altivec
+	default no-altivec	if BR2_powerpc && BR2_PPC_ABI_no-altivec
+	default spe		if BR2_powerpc && BR2_PPC_ABI_spe
+	default no-spe		if BR2_powerpc && BR2_PPC_ABI_no-spe
+	default ibmlongdouble	if BR2_powerpc && BR2_PPC_ABI_ibmlongdouble
+	default ieeelongdouble	if BR2_powerpc && BR2_PPC_ABI_ieeelongdouble
 

target/device/Arm/Config.in

@@ -3,16 +3,15 @@ menuconfig BR2_TARGET_ARM
 	depends BR2_arm
 	default n
 
-if BR2_TARGET_ARM
 comment "Arm based Device Support"
-	depends BR2_arm
+	depends BR2_arm && BR2_TARGET_ARM
 
 config BR2_TARGET_ARM_INTEGRATOR_926
 	bool "Integrator arm926"
-	depends BR2_arm
+	depends BR2_arm && BR2_TARGET_ARM
 	default n
 	select BR2_PACKAGE_LINUX
-	select BR2_EABI
+	select BR2_ARM_EABI
 	select BR2_KERNEL_HEADERS_2_6_22
 	select BR2_PTHREADS
 	select BR2_arm926t
@@ -20,4 +19,3 @@ config BR2_TARGET_ARM_INTEGRATOR_926
 	  An ARM integrator 926 board for use with qemu.
 	  This one has an MMU.
 
-endif

target/device/Arm/Makefile.in

@@ -7,7 +7,7 @@ UCLIBC_CONFIG_FILE:=target/device/Arm/uClibc.integrator926.config
 endif
 
 # pin some settings
-BR2_EABI:=y
+BR2_ARM_EABI:=y
 BR2_GNU_TARGET_SUFFIX:="linux-uclibcgnueabi"
 BR2_DEFAULT_KERNEL_HEADERS:="2.6.22.8"
 endif

target/device/Arm/integrator926_defconfig

@@ -39,8 +39,8 @@ BR2_arm926t=y
 # BR2_xscale is not set
 # BR2_iwmmxt is not set
 BR2_ARM_TYPE="ARM926T"
-# BR2_OABI is not set
-BR2_EABI=y
+# BR2_ARM_OABI is not set
+BR2_ARM_EABI=y
 # BR2_x86_i386 is not set
 # BR2_x86_i486 is not set
 # BR2_x86_i586 is not set

target/device/Arm/integrator926_huge_defconfig

@@ -39,8 +39,8 @@ BR2_arm926t=y
 # BR2_xscale is not set
 # BR2_iwmmxt is not set
 BR2_ARM_TYPE="ARM926T"
-# BR2_OABI is not set
-BR2_EABI=y
+# BR2_ARM_OABI is not set
+BR2_ARM_EABI=y
 BR2_ARCH="arm"
 BR2_ENDIAN="LITTLE"
 BR2_GCC_TARGET_TUNE="arm9tdmi"

target/device/Atmel/at91rm9200df/at91rm9200df_defconfig

@@ -153,8 +153,8 @@ BR2_GCC_VERSION_4_2_1=y
 BR2_GCC_SUPPORTS_SYSROOT=y
 # BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
 BR2_GCC_VERSION="4.2.1"
-BR2_OABI=y
-# BR2_EABI is not set
+BR2_ARM_OABI=y
+# BR2_ARM_EABI is not set
 BR2_TOOLCHAIN_SYSROOT=y
 # BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
 BR2_EXTRA_GCC_CONFIG_OPTIONS=""

target/device/Atmel/at91sam9260dfc/at91sam9260dfc_defconfig

@@ -42,8 +42,8 @@ BR2_generic_arm=y
 # BR2_xscale is not set
 # BR2_iwmmxt is not set
 BR2_ARM_TYPE="GENERIC_ARM"
-BR2_OABI=y
-# BR2_EABI is not set
+BR2_ARM_OABI=y
+# BR2_ARM_EABI is not set
 BR2_ARCH="arm"
 BR2_ENDIAN="LITTLE"
 

target/device/Atmel/at91sam9260pf/at91sam9260pf_defconfig

@@ -44,8 +44,8 @@ BR2_generic_arm=y
 # BR2_xscale is not set
 # BR2_iwmmxt is not set
 BR2_ARM_TYPE="GENERIC_ARM"
-BR2_OABI=y
-# BR2_EABI is not set
+BR2_ARM_OABI=y
+# BR2_ARM_EABI is not set
 BR2_ARCH="arm"
 BR2_ENDIAN="LITTLE"
 

target/device/Atmel/at91sam9261ek/at91sam9261ek_defconfig

@@ -44,8 +44,8 @@ BR2_generic_arm=y
 # BR2_xscale is not set
 # BR2_iwmmxt is not set
 BR2_ARM_TYPE="GENERIC_ARM"
-BR2_OABI=y
-# BR2_EABI is not set
+BR2_ARM_OABI=y
+# BR2_ARM_EABI is not set
 BR2_ARCH="arm"
 BR2_ENDIAN="LITTLE"
 

target/linux-experimental/Makefile.in

@@ -184,7 +184,7 @@ ifeq ($(strip $(BR2_LINUX_CUSTOMIZE)),y)
 	make -C $(LINUX26_DIR) xconfig
 endif
 	$(SED) '/CONFIG_AEABI/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_EABI),y)
+ifeq ($(BR2_ARM_EABI),y)
 	echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
 	$(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
 	echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config

target/linux/Makefile.in

@@ -148,7 +148,7 @@ endif
 $(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
 	cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
 	$(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_EABI),y)
+ifeq ($(BR2_ARM_EABI),y)
 	echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
 	$(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
 	echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config

toolchain/uClibc/uclibc.mk

@@ -139,11 +139,11 @@ ifeq ($(UCLIBC_TARGET_ARCH),arm)
 		 $(UCLIBC_DIR)/.oldconfig
 	$(SED) 's/^.*$(UCLIBC_ARM_TYPE).*/$(UCLIBC_ARM_TYPE)=y/g' $(UCLIBC_DIR)/.oldconfig
 	$(SED) '/CONFIG_ARM_.ABI/d' $(UCLIBC_DIR)/.oldconfig
-ifeq ($(BR2_EABI),y)
+ifeq ($(BR2_ARM_EABI),y)
 	/bin/echo "# CONFIG_ARM_OABI is not set" >> $(UCLIBC_DIR)/.oldconfig
 	/bin/echo "CONFIG_ARM_EABI=y" >> $(UCLIBC_DIR)/.oldconfig
 endif
-ifeq ($(BR2_OABI),y)
+ifeq ($(BR2_ARM_OABI),y)
 	/bin/echo "CONFIG_ARM_OABI=y" >> $(UCLIBC_DIR)/.oldconfig
 	/bin/echo "# CONFIG_ARM_EABI is not set" >> $(UCLIBC_DIR)/.oldconfig
 endif
@@ -154,13 +154,13 @@ ifeq ($(UCLIBC_TARGET_ARCH),mips)
 	 /bin/echo "# CONFIG_MIPS_N32_ABI is not set"; \
 	 /bin/echo "# CONFIG_MIPS_N64_ABI is not set"; \
 	) >> $(UCLIBC_DIR)/.oldconfig
-ifeq ($(BR2_OABI),y)
+ifeq ($(BR2_MIPS_OABI),y)
 	$(SED) 's/.*\(CONFIG_MIPS_O32_ABI\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
 endif
-ifeq ($(BR2_EABI),y)
+ifeq ($(BR2_MIPS_EABI),y)
 	$(SED) 's/.*\(CONFIG_MIPS_N32_ABI\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
 endif
-ifeq ($(BR2_ABI64),y)
+ifeq ($(BR2_MIPS_ABI64),y)
 	$(SED) 's/.*\(CONFIG_MIPS_N64_ABI\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
 endif
 endif