Merge branch 'next'

Kickoff 2013.02 cycle

board/calao/snowball/linux-3.4.patch

@@ -0,0 +1,45 @@
+From 3d1a9b44b9dcd2c0f5d54c09596c96c0524d8340 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Tue, 13 Nov 2012 11:47:41 +0100
+Subject: [PATCH] trace-debug[stm]: Fix for BT/WLAN instability
+
+Pins under mop500_ske_pins array are used for different
+functionalities in snowball. Ex: GPIO161 pin configured
+for keypad here must stay configured as GPIO alternate
+function for operating PMU_EN pin of BT/WLAN chip in snowball.
+So forbid configuring these pins, for snowball
+
+Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/mach-ux500/board-mop500-stm.c |    7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-ux500/board-mop500-stm.c b/arch/arm/mach-ux500/board-mop500-stm.c
+index 1bef2a0..532fb9e 100644
+--- a/arch/arm/mach-ux500/board-mop500-stm.c
++++ b/arch/arm/mach-ux500/board-mop500-stm.c
+@@ -121,7 +121,9 @@ static int stm_ste_disable_ape_on_mipi60(void)
+ 	if (retval)
+ 		STM_ERR("Failed to disable MIPI60\n");
+ 	else {
+-		retval = nmk_config_pins(ARRAY_AND_SIZE(mop500_ske_pins));
++		if (!machine_is_snowball())
++			retval = nmk_config_pins(
++				ARRAY_AND_SIZE(mop500_ske_pins));
+ 		if (retval)
+ 			STM_ERR("Failed to enable SKE gpio\n");
+ 	}
+@@ -314,7 +316,8 @@ static int stm_ste_connection(enum stm_connection_type con_type)
+ 		/* Enable altC3 on GPIO70-74 (STMMOD) and GPIO75-76 (UARTMOD) */
+ 		prcmu_enable_stm_mod_uart();
+ 		/* Enable APE on MIPI60 */
+-		retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
++		if (!machine_is_snowball())
++			retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
+ 		if (retval)
+ 			STM_ERR("Failed to disable SKE GPIO\n");
+ 		else {
+-- 
+1.7.9.5
+

configs/calao_snowball_defconfig

@@ -0,0 +1,24 @@
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_GCC_VERSION_4_7_X=y
+# BR2_SOFT_FLOAT is not set
+BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_VFP_FLOAT=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA2"
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_SNOWBALL_HDMISERVICE=y
+BR2_PACKAGE_LIBNL=y
+BR2_PACKAGE_SNOWBALL_INIT=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_TARGET_ROOTFS_TAR_GZIP=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="snowball"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://igloocommunity.org/git/kernel/igloo-kernel.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="stable-linux-ux500-3.4"
+BR2_LINUX_KERNEL_PATCH="board/calao/snowball/"
+BR2_LINUX_KERNEL_DEFCONFIG="u8500"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y

package/Config.in

@@ -250,6 +250,7 @@ source "package/sane-backends/Config.in"
 source "package/sdparm/Config.in"
 source "package/setserial/Config.in"
 source "package/smartmontools/Config.in"
+source "package/snowball-hdmiservice/Config.in"
 source "package/sredird/Config.in"
 source "package/statserial/Config.in"
 source "package/sysstat/Config.in"
@@ -260,6 +261,7 @@ source "package/usb_modeswitch/Config.in"
 source "package/usb_modeswitch_data/Config.in"
 source "package/usbmount/Config.in"
 source "package/usbutils/Config.in"
+source "package/ux500-firmware/Config.in"
 source "package/wipe/Config.in"
 endmenu
 
@@ -376,6 +378,7 @@ source "package/cairo/Config.in"
 source "package/fltk/Config.in"
 source "package/fontconfig/Config.in"
 source "package/freetype/Config.in"
+source "package/gd/Config.in"
 source "package/giblib/Config.in"
 source "package/gtk2-engines/Config.in"
 source "package/gtk2-themes/Config.in"
@@ -434,6 +437,8 @@ endmenu
 menu "Multimedia"
 source "package/libdvdread/Config.in"
 source "package/libdvdnav/Config.in"
+source "package/libebml/Config.in"
+source "package/libmatroska/Config.in"
 source "package/libmms/Config.in"
 source "package/libmpeg2/Config.in"
 source "package/libogg/Config.in"
@@ -549,6 +554,7 @@ source "package/empty/Config.in"
 source "package/googlefontdirectory/Config.in"
 source "package/mobile-broadband-provider-info/Config.in"
 source "package/shared-mime-info/Config.in"
+source "package/snowball-init/Config.in"
 source "package/sound-theme-borealis/Config.in"
 source "package/sound-theme-freedesktop/Config.in"
 endmenu

package/bluez_utils/bluez_utils-4.101-enable_cg2900_on_upstream_4.91.patch

@@ -0,0 +1,106 @@
+From ac7992081abba87627c9e91735b3309584b48585 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Wed, 14 Nov 2012 14:27:02 +0100
+Subject: [PATCH] add support for the ST-Ericsson CG2900 GPS FM Bluetooth
+ combo controller
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ tools/hciattach.c |   22 +++++++++++++++-------
+ tools/hciattach.h |    1 +
+ 2 files changed, 16 insertions(+), 7 deletions(-)
+
+diff --git a/tools/hciattach.c b/tools/hciattach.c
+index e4d5aa1..7f08243 100644
+--- a/tools/hciattach.c
++++ b/tools/hciattach.c
+@@ -1066,6 +1066,11 @@ struct uart_t uart[] = {
+ 	{ "texasalt",   0x0000, 0x0000, HCI_UART_LL,   115200, 115200,
+ 				FLOW_CTL, DISABLE_PM, NULL, texasalt, NULL   },
+ 
++	/* ST-Ericsson CG2900 GPS FM Bluetooth combo controller */
++	{ "cg2900",     0x0000, 0x0000, HCI_UART_STE,  115200, 115200,
++				FLOW_CTL, DISABLE_PM, NULL, NULL     },
++
++
+ 	/* ST Microelectronics minikits based on STLC2410/STLC2415 */
+ 	{ "st",         0x0000, 0x0000, HCI_UART_H4,    57600, 115200,
+ 				FLOW_CTL, DISABLE_PM,  NULL, st       },
+@@ -1157,10 +1162,10 @@ static struct uart_t * get_by_type(char *type)
+ }
+ 
+ /* Initialize UART driver */
+-static int init_uart(char *dev, struct uart_t *u, int send_break, int raw)
++static int init_uart(char *dev, struct uart_t *u, int send_break, int raw, int line_disc)
+ {
+ 	struct termios ti;
+-	int fd, i;
++	int fd;
+ 	unsigned long flags = 0;
+ 
+ 	if (raw)
+@@ -1217,8 +1222,7 @@ static int init_uart(char *dev, struct uart_t *u, int send_break, int raw)
+ 	}
+ 
+ 	/* Set TTY to N_HCI line discipline */
+-	i = N_HCI;
+-	if (ioctl(fd, TIOCSETD, &i) < 0) {
++	if (ioctl(fd, TIOCSETD, &line_disc) < 0) {
+ 		perror("Can't set line discipline");
+ 		return -1;
+ 	}
+@@ -1243,7 +1247,7 @@ static void usage(void)
+ {
+ 	printf("hciattach - HCI UART driver initialization utility\n");
+ 	printf("Usage:\n");
+-	printf("\thciattach [-n] [-p] [-b] [-r] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow] [bdaddr]\n");
++	printf("\thciattach [-n] [-p] [-a line_disc_nr] [-b] [-r] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow] [bdaddr]\n");
+ 	printf("\thciattach -l\n");
+ }
+ 
+@@ -1252,6 +1256,7 @@ int main(int argc, char *argv[])
+ 	struct uart_t *u = NULL;
+ 	int detach, printpid, raw, opt, i, n, ld, err;
+ 	int to = 10;
++	int line_disc = N_HCI;
+ 	int init_speed = 0;
+ 	int send_break = 0;
+ 	pid_t pid;
+@@ -1264,8 +1269,11 @@ int main(int argc, char *argv[])
+ 	printpid = 0;
+ 	raw = 0;
+ 
+-	while ((opt=getopt(argc, argv, "bnpt:s:lr")) != EOF) {
++	while ((opt=getopt(argc, argv, "bnpt:s:lra:")) != EOF) {
+ 		switch(opt) {
++		case 'a':
++                        line_disc = atoi(optarg);
++                        break;
+ 		case 'b':
+ 			send_break = 1;
+ 			break;
+@@ -1381,7 +1389,7 @@ int main(int argc, char *argv[])
+ 	alarm(to);
+ 	bcsp_max_retries = to;
+ 
+-	n = init_uart(dev, u, send_break, raw);
++	n = init_uart(dev, u, send_break, raw, line_disc);
+ 	if (n < 0) {
+ 		perror("Can't initialize device");
+ 		exit(1);
+diff --git a/tools/hciattach.h b/tools/hciattach.h
+index fed0d11..09b534d 100644
+--- a/tools/hciattach.h
++++ b/tools/hciattach.h
+@@ -39,6 +39,7 @@
+ #define HCI_UART_H4DS	3
+ #define HCI_UART_LL	4
+ #define HCI_UART_ATH3K  5
++#define HCI_UART_STE	6
+ 
+ #define HCI_UART_RAW_DEVICE	0
+ 
+-- 
+1.7.9.5
+

package/ccache/ccache.mk

@@ -4,7 +4,7 @@
 #
 #############################################################
 
-CCACHE_VERSION = 3.1.7
+CCACHE_VERSION = 3.1.8
 CCACHE_SITE    = http://samba.org/ftp/ccache
 CCACHE_SOURCE  = ccache-$(CCACHE_VERSION).tar.bz2
 

package/cpanminus/cpanminus.mk

@@ -7,12 +7,12 @@
 CPANMINUS_VERSION = 1.5018
 CPANMINUS_SOURCE = miyagawa-cpanminus-$(CPANMINUS_VERSION)-0-gee6cd30.tar.gz
 CPANMINUS_SITE = https://github.com/miyagawa/cpanminus/tarball/$(CPANMINUS_VERSION)
-CPANMINUS_DEPENDENCIES = perl $(call qstrip,$(BR2_PACKAGE_CPANMINUS_NATIVE_DEPENDENCIES))
+CPANMINUS_DEPENDENCIES = host-qemu perl $(call qstrip,$(BR2_PACKAGE_CPANMINUS_NATIVE_DEPENDENCIES))
 
 CPANMINUS_RUN_PERL = $(QEMU_USER) $(STAGING_DIR)/usr/bin/perl
 CPANMINUS_ARCHNAME = $(shell $(CPANMINUS_RUN_PERL) -MConfig -e "print Config->{archname}")
-CPANMINUS_PERL_LIB      = $(STAGING_DIR)/usr/lib/perl5/$(PERL_VERSION)
-CPANMINUS_PERL_SITELIB  = $(TARGET_DIR)/usr/lib/perl5/site_perl/$(PERL_VERSION)
+CPANMINUS_PERL_LIB      = $(STAGING_DIR)/usr/lib/perl
+CPANMINUS_PERL_SITELIB  = $(TARGET_DIR)/usr/lib/perl
 CPANMINUS_PERL_ARCHLIB  = $(CPANMINUS_PERL_LIB)/$(CPANMINUS_ARCHNAME)
 CPANMINUS_PERL_SITEARCH = $(CPANMINUS_PERL_SITELIB)/$(CPANMINUS_ARCHNAME)
 CPANMINUS_PERL5LIB = $(CPANMINUS_PERL_SITEARCH):$(CPANMINUS_PERL_SITELIB):$(CPANMINUS_PERL_ARCHLIB):$(CPANMINUS_PERL_LIB)
@@ -27,8 +27,8 @@ define CPANMINUS_INSTALL_TARGET_CMDS
 	echo "PERL5LIB=$(CPANMINUS_PERL5LIB) $(CPANMINUS_RUN_PERL) \"\$$@\""    >>$(@D)/run_perl
 	chmod +x $(@D)/run_perl
 	PERL5LIB=$(CPANMINUS_PERL5LIB) \
-	PERL_MM_OPT="DESTDIR=$(TARGET_DIR) PERL=$(@D)/run_perl PERL_LIB=$(CPANMINUS_PERL_LIB) PERL_ARCHLIB=$(CPANMINUS_PERL_ARCHLIB)" \
-	PERL_MB_OPT="--destdir $(TARGET_DIR)" \
+	PERL_MM_OPT="DESTDIR=$(CPANMINUS_PERL_SITELIB) PERL=$(@D)/run_perl PERL_LIB=$(CPANMINUS_PERL_LIB) PERL_ARCHLIB=$(CPANMINUS_PERL_ARCHLIB)" \
+	PERL_MB_OPT="--destdir $(CPANMINUS_PERL_SITELIB)" \
 	RUN_PERL="$(@D)/run_perl" \
 	$(CPANMINUS_RUN_PERL) $(@D)/cpanm \
 		--perl=$(@D)/run_perl \
@@ -36,7 +36,7 @@ define CPANMINUS_INSTALL_TARGET_CMDS
 		--no-man-pages \
 		$(CPANMINUS_MIRROR) \
 		$(call qstrip,$(BR2_PACKAGE_CPANMINUS_MODULES))
-	find $(CPANMINUS_PERL_SITEARCH) -type f -name *.bs -exec rm -f {} \;
+	-find $(CPANMINUS_PERL_SITEARCH) -type f -name *.bs -exec rm -f {} \;
 endef
 else
 define CPANMINUS_INSTALL_TARGET_CMDS

package/gd/Config.in

@@ -0,0 +1,62 @@
+config BR2_PACKAGE_GD
+	bool "gd"
+	help
+	  GD is a graphics library. It allows your code to quickly
+	  draw images complete with lines, arcs, text, multiple
+	  colours, cut and paste from other images, flood fills, and
+	  write out the result as a PNG file. This is particularly
+	  useful in World Wide Web applications, where PNG is one of
+	  the formats accepted for inline images by most browsers.
+
+	  http://www.boutell.com/gd/
+
+if BR2_PACKAGE_GD
+
+menu "gd tools"
+
+config BR2_PACKAGE_GD_ANNOTATE
+       bool "annotate"
+
+config BR2_PACKAGE_GD_BDFTOGD
+       bool "bdftogd"
+       depends on BR2_PACKAGE_PERL
+
+config BR2_PACKAGE_GD_GD2COPYPAL
+       bool "gd2copypal"
+
+config BR2_PACKAGE_GD_GD2TOGIF
+       bool "gd2togif"
+
+config BR2_PACKAGE_GD_GD2TOPNG
+       bool "gd2topng"
+       select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_GD_GDCMPGIF
+       bool "gdcmpgif"
+
+config BR2_PACKAGE_GD_GDPARTTOPNG
+       bool "gdparttopng"
+       select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_GD_GDTOPNG
+       bool "gdtopng"
+       select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_GD_GIFTOGD2
+       bool "giftogd2"
+
+config BR2_PACKAGE_GD_PNGTOGD
+       bool "pngtogd"
+       select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_GD_PNGTOGD2
+       bool "pngtogd2"
+       select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_GD_WEBPNG
+       bool "webpng"
+       select BR2_PACKAGE_LIBPNG
+
+endmenu
+
+endif

package/gd/gd-fontconfig.patch

@@ -0,0 +1,28 @@
+Patch from Gentoo:
+http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/media-libs/gd/files/gd-2.0.35-fontconfig.patch?view=log
+
+fix from upstream
+
+http://bugs.gentoo.org/363367
+
+# HG changeset patch
+# User tabe
+# Date 1239812355 0
+# Node ID 3ea283efcdafcb2acc1dd0ace1d3d48da6d8cec8
+# Parent  4f29a877875f63cee5a64e7bea406a61882a565e
+fixed FS#199
+
+199, Fixed useFontConfig() to work as documented (Ethan Merritt)
+ 
+diff -r 4f29a877875f -r 3ea283efcdaf gdft.c
+--- a/gdft.c	Sat Apr 04 12:00:37 2009 +0000
++++ b/gdft.c	Wed Apr 15 16:19:15 2009 +0000
+@@ -1659,7 +1659,7 @@
+ BGD_DECLARE(int) gdFTUseFontConfig(int flag)
+ {
+ #ifdef HAVE_LIBFONTCONFIG
+-	fontConfigFlag = 1;
++	fontConfigFlag = flag;
+ 	return 1;
+ #else
+ 	return 0;

package/gd/gd-maxcolors.patch

@@ -0,0 +1,20 @@
+Patch from Gentoo:
+http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/media-libs/gd/files/gd-2.0.35-maxcolors.patch?view=log
+
+http://bugs.gentoo.org/292130
+
+fix in usptream repo already
+
+--- gd-2.0.35/gd_gd.c
++++ gd-2.0.35/gd_gd.c
+@@ -44,6 +44,10 @@
+ 	    {
+ 	      goto fail1;
+ 	    }
++	  if (im->colorsTotal > gdMaxColors)
++	    {
++		   goto fail1;
++		 }
+ 	}
+       /* Int to accommodate truecolor single-color transparency */
+       if (!gdGetInt (&im->transparent, in))

package/gd/gd-no-zlib.patch

@@ -0,0 +1,51 @@
+[PATCH] gd_gd2: provide dummy implementations for all public symbols when !zlib
+
+gd_gd2.c only provides dummy implementations for some of it's public symbols
+when zlib isn't found, causing build failures in several of the tools.
+
+Fix it by providing dummy implementations for all of them.
+
+Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+---
+ gd_gd2.c |   30 ++++++++++++++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+Index: gd-2.0.35/gd_gd2.c
+===================================================================
+--- gd-2.0.35.orig/gd_gd2.c
++++ gd-2.0.35/gd_gd2.c
+@@ -1068,4 +1068,34 @@
+   fprintf (stderr, "GD2 support is not available - no libz\n");
+   return NULL;
+ }
++
++BGD_DECLARE(gdImagePtr) gdImageCreateFromGd2Part (FILE * inFile, int srcx, int srcy, int w, int h)
++{
++  fprintf (stderr, "GD2 support is not available - no libz\n");
++  return NULL;
++}
++
++BGD_DECLARE(gdImagePtr) gdImageCreateFromGd2PartPtr (int size, void *data, int srcx, int srcy, int w,
++			     int h)
++{
++  fprintf (stderr, "GD2 support is not available - no libz\n");
++  return NULL;
++}
++
++BGD_DECLARE(gdImagePtr) gdImageCreateFromGd2PartCtx (gdIOCtx * in, int srcx, int srcy, int w, int h)
++{
++  fprintf (stderr, "GD2 support is not available - no libz\n");
++  return NULL;
++}
++
++BGD_DECLARE(void) gdImageGd2 (gdImagePtr im, FILE * outFile, int cs, int fmt)
++{
++  fprintf (stderr, "GD2 support is not available - no libz\n");
++}
++
++BGD_DECLARE(void *) gdImageGd2Ptr (gdImagePtr im, int cs, int fmt, int *size)
++{
++  fprintf (stderr, "GD2 support is not available - no libz\n");
++  return NULL;
++}
+ #endif /* HAVE_LIBZ */

package/gd/gd.mk

@@ -0,0 +1,87 @@
+################################################################################
+#
+# gd
+#
+################################################################################
+
+GD_VERSION = 2.0.35
+GD_SOURCE = gd-$(GD_VERSION).tar.bz2
+GD_SITE = http://distfiles.gentoo.org/distfiles
+# needed because of configure.ac timestamp
+GD_AUTORECONF = YES
+GD_INSTALL_STAGING = YES
+GD_LICENSE = GD license
+GD_LICENSE_FILES = COPYING
+
+GD_CONF_OPT = --without-x --disable-rpath
+
+ifeq ($(BR2_PACKAGE_FONTCONFIG),y)
+GD_DEPENDENCIES += fontconfig
+GD_CONF_OPT += --with-fontconfig
+GD_CONF_ENV += ac_cv_path_FREETYPE_CONFIG=$(STAGING_DIR)/usr/bin/freetype-config
+endif
+
+ifeq ($(BR2_PACKAGE_JPEG),y)
+GD_DEPENDENCIES += jpeg
+GD_CONF_OPT += --with-jpeg
+endif
+
+ifeq ($(BR2_PACKAGE_LIBPNG),y)
+GD_DEPENDENCIES += libpng
+GD_CONF_OPT += --with-png
+endif
+
+ifeq ($(BR2_PACKAGE_XLIB_LIBXPM),y)
+GD_DEPENDENCIES += xlib_libXpm
+GD_CONF_OPT += --with-xpm
+endif
+
+ifeq ($(BR2_PACKAGE_ZLIB),y)
+GD_DEPENDENCIES += zlib
+endif
+
+ifeq ($(BR2_PACKAGE_GETTEXT),y)
+GD_DEPENDENCIES += gettext
+else
+# configure.ac has newer timestamp than aclocal.m4 / configure, so we need
+# to autoreconf to regenerate them (or set configure.ac timestamp to older
+# than them) to make the Makefile happy.
+# configure.ac refers to AM_ICONV which we only have if gettext is enabled,
+# so add a dummy definition elsewise
+define GD_FIXUP_ICONV
+	echo 'm4_ifndef([AM_ICONV],[m4_define([AM_ICONV],[:])])' \
+		>> $(@D)/acinclude.m4
+endef
+
+GD_PRE_CONFIGURE_HOOKS += GD_FIXUP_ICONV
+endif
+
+define GD_FIXUP_GDLIB_CONFIG
+	$(SED) 's%prefix=/usr%prefix=$(STAGING_DIR)/usr%' \
+	    -e 's%exec_prefix=/usr%exec_prefix=$(STAGING_DIR)/usr%' \
+		$(STAGING_DIR)/usr/bin/gdlib-config
+endef
+
+GD_POST_INSTALL_STAGING_HOOKS += GD_FIXUP_GDLIB_CONFIG
+
+GD_TOOLS_                         	+= gdlib-config
+GD_TOOLS_$(BR2_PACKAGE_GD_ANNOTATE)	+= annotate
+GD_TOOLS_$(BR2_PACKAGE_GD_BDFTOGD)	+= bdftogd
+GD_TOOLS_$(BR2_PACKAGE_GD_GD2COPYPAL)	+= gd2copypal
+GD_TOOLS_$(BR2_PACKAGE_GD_GD2TOGIF)	+= gd2togif
+GD_TOOLS_$(BR2_PACKAGE_GD_GD2TOPNG)	+= gd2topng
+GD_TOOLS_$(BR2_PACKAGE_GD_GDCMPGIF)	+= gdcmpgif
+GD_TOOLS_$(BR2_PACKAGE_GD_GDPARTTOPNG)	+= gdparttopng
+GD_TOOLS_$(BR2_PACKAGE_GD_GDTOPNG)	+= gdtopng
+GD_TOOLS_$(BR2_PACKAGE_GD_GIFTOGD2)	+= giftogd2
+GD_TOOLS_$(BR2_PACKAGE_GD_PNGTOGD)	+= pngtogd
+GD_TOOLS_$(BR2_PACKAGE_GD_PNGTOGD2)	+= pngtogd2
+GD_TOOLS_$(BR2_PACKAGE_GD_WEBPNG)	+= webpng
+
+define GD_REMOVE_TOOLS
+	rm -f $(addprefix $(TARGET_DIR)/usr/bin/,$(GD_TOOLS_))
+endef
+
+GD_POST_INSTALL_TARGET_HOOKS += GD_REMOVE_TOOLS
+
+$(eval $(autotools-package))

package/libebml/Config.in

@@ -0,0 +1,11 @@
+config BR2_PACKAGE_LIBEBML
+	bool "libebml"
+	depends on BR2_INSTALL_LIBSTDCPP
+	help
+	  Access library for the EBML (Extensible Binary Meta
+	  Language, a binary derivative of XML) format.
+
+	  http://matroska.org
+
+comment "libebml requires a toolchain with C++ support"
+	depends on !BR2_INSTALL_LIBSTDCPP

package/libebml/libebml.mk

@@ -0,0 +1,26 @@
+#############################################################
+#
+# libebml
+#
+#############################################################
+
+LIBEBML_VERSION = 1.2.2
+LIBEBML_SOURCE = libebml-$(LIBEBML_VERSION).tar.bz2
+LIBEBML_SITE = http://dl.matroska.org/downloads/libebml/
+LIBEBML_INSTALL_STAGING = YES
+LIBEBML_LICENSE = LGPLv2.1+
+LIBEBML_LICENSE_FILES = LICENSE.LGPL
+
+define LIBEBML_BUILD_CMDS
+	$(MAKE) -C $(@D)/make/linux CROSS="$(CCACHE) $(TARGET_CROSS)"
+endef
+
+define LIBEBML_INSTALL_STAGING_CMDS
+	$(MAKE) -C $(@D)/make/linux prefix=$(STAGING_DIR)/usr install
+endef
+
+define LIBEBML_INSTALL_TARGET_CMDS
+	$(MAKE) -C $(@D)/make/linux prefix=$(TARGET_DIR)/usr install
+endef
+
+$(eval $(generic-package))

package/libmatroska/Config.in

@@ -0,0 +1,12 @@
+config BR2_PACKAGE_LIBMATROSKA
+	bool "libmatroska"
+	select BR2_PACKAGE_LIBEBML
+	depends on BR2_INSTALL_LIBSTDCPP
+	help
+	  Extensible open standard audio/video container format access
+	  library.
+
+	  http://matroska.org
+
+comment "libmatroska requires a toolchain with C++ support"
+	depends on !BR2_INSTALL_LIBSTDCPP

package/libmatroska/libmatroska.mk

@@ -0,0 +1,27 @@
+#############################################################
+#
+# libmatroska
+#
+#############################################################
+
+LIBMATROSKA_VERSION = 1.3.0
+LIBMATROSKA_SOURCE = libmatroska-$(LIBMATROSKA_VERSION).tar.bz2
+LIBMATROSKA_SITE = http://dl.matroska.org/downloads/libmatroska/
+LIBMATROSKA_INSTALL_STAGING = YES
+LIBMATROSKA_LICENSE = LGPLv2.1+
+LIBMATROSKA_LICENSE_FILES = LICENSE.LGPL
+LIBMATROSKA_DEPENDENCIES = libebml
+
+define LIBMATROSKA_BUILD_CMDS
+	$(MAKE) -C $(@D)/make/linux CROSS="$(CCACHE) $(TARGET_CROSS)"
+endef
+
+define LIBMATROSKA_INSTALL_STAGING_CMDS
+	$(MAKE) -C $(@D)/make/linux prefix=$(STAGING_DIR)/usr install
+endef
+
+define LIBMATROSKA_INSTALL_TARGET_CMDS
+	$(MAKE) -C $(@D)/make/linux prefix=$(TARGET_DIR)/usr install
+endef
+
+$(eval $(generic-package))

package/libroxml/libroxml-2.2.0-werror.patch → package/libroxml/libroxml-werror.patch

@@ -7,10 +7,10 @@ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
  Makefile |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-Index: libroxml-2.1.0/Makefile
+Index: a/Makefile
 ===================================================================
---- libroxml-2.1.0.orig/Makefile
-+++ libroxml-2.1.0/Makefile
+--- a/Makefile
++++ b/Makefile
 @@ -41,7 +41,7 @@
  
  # options

package/libroxml/libroxml.mk

@@ -2,7 +2,7 @@
 # libroxml
 #
 
-LIBROXML_VERSION = 2.2.0
+LIBROXML_VERSION = 2.2.1
 LIBROXML_SITE = http://libroxml.googlecode.com/files
 LIBROXML_INSTALL_STAGING = YES
 

package/multimedia/gstreamer/Config.in

@@ -12,9 +12,17 @@ config BR2_PACKAGE_GSTREAMER_GST_DEBUG
 	default y
 	depends on BR2_PACKAGE_GSTREAMER
 	help
-	  Enable support for the gst-debug tracing functionality
-	  in gstreamer. This has limited CPU overhead, but does
-	  increase the rootfs size somewhat.
+	  Enable support for the gst-debug tracing functionality in gstreamer.
+	  This has limited CPU overhead, but does increase the rootfs size
+	  somewhat.
+
+config BR2_PACKAGE_GSTREAMER_PLUGIN_REGISTRY
+	bool "enable plugin registry"
+	default y
+	depends on BR2_PACKAGE_GSTREAMER
+	help
+	  Enable support for the GStreamer plugin registry. This may increase
+	  the launch-time for a GStreamer application.
 
 comment "gstreamer requires a toolchain with WCHAR support"
 	depends on !BR2_USE_WCHAR

package/multimedia/gstreamer/gstreamer.mk

@@ -21,7 +21,8 @@ GSTREAMER_CONF_OPT = \
 		--disable-tests \
 		--disable-failing-tests \
 		--disable-loadsave \
-		$(if $(BR2_PACKAGE_GSTREAMER_GST_DEBUG),,--disable-gst-debug)
+		$(if $(BR2_PACKAGE_GSTREAMER_GST_DEBUG),,--disable-gst-debug) \
+		$(if $(BR2_PACKAGE_GSTREAMER_PLUGIN_REGISTRY),,--disable-registry)
 
 GSTREAMER_DEPENDENCIES = libglib2 host-pkgconf
 

package/perl/perl-configure-qemu.patch

@@ -1,53 +0,0 @@
-Add qemu support
-
-see https://rt.perl.org/rt3//Public/Bug/Display.html?id=114798
-
-Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
-
-Index: b/Configure
-===================================================================
---- a/Configure
-+++ b/Configure
-@@ -2837,6 +2837,9 @@
-             ;;
-         *)  echo "Using usrinc $usrinc." >&4 ;;
- 	esac
-+	case "$targetrun" in
-+	*qemu*) targethost=dummy ;;
-+	esac
- 	case "$targethost" in
- 	'') echo "Targethost not defined." >&4; croak=y ;;
-         *)  echo "Using targethost $targethost." >&4
-@@ -2868,7 +2871,7 @@
- 	case "$targetfrom" in
- 	'') targetfrom=scp ;;
- 	esac
--    	run=$run-$targetrun
-+    	run=$run-`basename $targetrun`
-     	to=$to-$targetto
-     	from=$from-$targetfrom
- 	case "$targetdir" in
-@@ -2908,6 +2911,14 @@
- $targetrun -l $targetuser $targethost "cd \$cwd && ./\$exe \$@"
- EOF
- 	    ;;
-+	*qemu*)
-+	    to=:
-+	    from=:
-+	    cat >$run <<EOF
-+#!/bin/sh
-+$targetrun -L $qemulib "\$@"
-+EOF
-+	    ;;
- 	*)  echo "Unknown targetrun '$targetrun'" >&4
- 	    exit 1
- 	    ;;
-@@ -5048,7 +5059,7 @@
- echo " ";
- echo "Checking if your compiler accepts $flag" 2>&1;
- echo "int main(void) { return 0; }" > gcctest.c;
--if $cc -O2 $flag -o gcctest gcctest.c 2>gcctest.out && ./gcctest; then
-+if $cc -O2 $flag -o gcctest gcctest.c 2>gcctest.out && $run ./gcctest; then
-     echo "Yes, it does." 2>&1;
-     if $test -s gcctest.out ; then
-         echo "But your platform does not like it:";

package/perl/perl-make-ext.patch

@@ -1,24 +0,0 @@
-Don't use RUN with make (only for perl)
-
-Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
-
-Index: b/make_ext.pl
-===================================================================
---- a/make_ext.pl
-+++ b/make_ext.pl
-@@ -458,11 +458,13 @@
- 	# Give makefile an opportunity to rewrite itself.
- 	# reassure users that life goes on...
- 	my @args = ('config', @$pass_through);
--	system(@run, @make, @args) and print "@run @make @args failed, continuing anyway...\n";
-+#	system(@run, @make, @args) and print "@run @make @args failed, continuing anyway...\n";
-+	system(@make, @args) and print "@make @args failed, continuing anyway...\n";
-     }
-     my @targ = ($target, @$pass_through);
-     print "Making $target in $ext_dir\n@run @make @targ\n";
--    my $code = system(@run, @make, @targ);
-+#    my $code = system(@run, @make, @targ);
-+    my $code = system(@make, @targ);
-     die "Unsuccessful make($ext_dir): code=$code" if $code != 0;
- 
-     chdir $return_dir || die "Cannot cd to $return_dir: $!";

package/perl/perl-mkppport.patch

@@ -1,37 +0,0 @@
-Add RUN
-
-Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
-
-Index: b/mkppport
-===================================================================
---- a/mkppport
-+++ b/mkppport
-@@ -1,6 +1,7 @@
- use strict;
- use warnings;
- 
-+use Config;
- use Getopt::Long;
- use File::Spec;
- use File::Compare qw( compare );
-@@ -136,14 +137,18 @@
- #----------------------------------------------
- sub run
- {
-+  my @run = $Config{run};
-+  @run = () if not defined $run[0] or $run[0] eq '';
-   my @args = ("-I" . File::Spec->catdir((File::Spec->updir) x 2, 'lib'), @_);
-   my $run = $perl =~ m/\s/ ? qq("$perl") : $perl;
-   for (@args) {
-     $_ = qq("$_") if $^O eq 'VMS' && /^[^"]/;
-     $run .= " $_";
-   }
--  print "running $run\n";
--  system $run and die "$run failed: $?\n";
-+#  print "running $run\n";
-+#  system $run and die "$run failed: $?\n";
-+  print "running ", join(' ', @run, $run), "\n";
-+  system join(' ', @run, $run) and die "@run $run failed: $?\n";
- }
- 
- __END__

package/perl/perl.mk

@@ -13,8 +13,11 @@ PERL_LICENSE_FILES = Artistic
 PERL_INSTALL_STAGING = YES
 
 PERL_CROSS_VERSION = 0.7
+PERL_CROSS_BASE_VERSION = 5.$(PERL_VERSION_MAJOR).0
 PERL_CROSS_SITE    = http://download.berlios.de/perlcross
-PERL_CROSS_SOURCE  = perl-5.$(PERL_VERSION_MAJOR).0-cross-$(PERL_CROSS_VERSION).tar.gz
+PERL_CROSS_SOURCE  = perl-$(PERL_CROSS_BASE_VERSION)-cross-$(PERL_CROSS_VERSION).tar.gz
+PERL_CROSS_OLD_POD = perl$(subst .,,$(PERL_CROSS_BASE_VERSION))delta.pod
+PERL_CROSS_NEW_POD = perl$(subst .,,$(PERL_VERSION))delta.pod
 
 # We use the perlcross hack to cross-compile perl. It should
 # be extracted over the perl sources, so we don't define that
@@ -32,6 +35,11 @@ define PERL_CROSS_EXTRACT
 endef
 PERL_POST_EXTRACT_HOOKS += PERL_CROSS_EXTRACT
 
+define PERL_CROSS_SET_POD
+	$(SED) s/$(PERL_CROSS_OLD_POD)/$(PERL_CROSS_NEW_POD)/g $(@D)/Makefile
+endef
+PERL_POST_PATCH_HOOKS += PERL_CROSS_SET_POD
+
 ifeq ($(BR2_PACKAGE_BERKELEYDB),y)
     PERL_DEPENDENCIES += berkeleydb
 endif
@@ -39,31 +47,22 @@ ifeq ($(BR2_PACKAGE_GDBM),y)
     PERL_DEPENDENCIES += gdbm
 endif
 
-# Normally, --mode=cross should automatically do the two steps
-# below, but it doesn't work for some reason.
-PERL_HOST_CONF_OPT = \
-	--mode=buildmini \
-	--target=$(GNU_TARGET_NAME) \
-	--target-arch=$(GNU_TARGET_NAME) \
-	--set-target-name=$(GNU_TARGET_NAME)
-
 # We have to override LD, because an external multilib toolchain ld is not
 # wrapped to provide the required sysroot options.  We also can't use ccache
 # because the configure script doesn't support it.
 PERL_CONF_OPT = \
-	--mode=target \
 	--target=$(GNU_TARGET_NAME) \
 	--target-tools-prefix=$(TARGET_CROSS) \
 	--prefix=/usr \
 	-Dld="$(TARGET_CC_NOCCACHE)" \
-	-A ccflags="$(TARGET_CFLAGS)" \
-	-A ldflags="$(TARGET_LDFLAGS) -lm" \
-	-A mydomain="" \
-	-A myhostname="$(BR2_TARGET_GENERIC_HOSTNAME)" \
-	-A myuname="Buildroot $(BR2_VERSION_FULL)" \
-	-A osname=linux \
-	-A osvers=$(LINUX_VERSION) \
-	-A perlamdin=root
+	-Dccflags="$(TARGET_CFLAGS)" \
+	-Dldflags="$(TARGET_LDFLAGS) -lm" \
+	-A define:mydomain="" \
+	-A define:myhostname="$(BR2_TARGET_GENERIC_HOSTNAME)" \
+	-A define:myuname="Buildroot $(BR2_VERSION_FULL)" \
+	-A define:osname=linux \
+	-A define:osvers=$(LINUX_VERSION) \
+	-A define:perladmin=root
 
 ifeq ($(shell expr $(PERL_VERSION_MAJOR) % 2), 1)
     PERL_CONF_OPT += -Dusedevel
@@ -79,8 +78,7 @@ PERL_CONF_OPT += --only-mod=$(subst $(space),$(comma),$(PERL_MODULES))
 endif
 
 define PERL_CONFIGURE_CMDS
-	(cd $(@D); HOSTCC='$(HOSTCC_NOCACHE)' ./configure $(PERL_HOST_CONF_OPT))
-	(cd $(@D); ./configure $(PERL_CONF_OPT))
+	(cd $(@D); HOSTCC='$(HOSTCC_NOCACHE)' ./configure $(PERL_CONF_OPT))
 	$(SED) 's/UNKNOWN-/Buildroot $(BR2_VERSION_FULL) /' $(@D)/patchlevel.h
 endef
 

package/snowball-hdmiservice/Config.in

@@ -0,0 +1,10 @@
+config BR2_PACKAGE_SNOWBALL_HDMISERVICE
+	bool "snowball-hdmiservice"
+	depends on BR2_TOOLCHAIN_HAS_THREADS	
+	help
+	  HDMI userspace control daemon
+
+	  This package contains the HDMI userspace control daemon for the 
+	  snowball board
+	  
+	  http://www.igloocommunity.org

package/snowball-hdmiservice/snowball-hdmiservice.mk

@@ -0,0 +1,41 @@
+#############################################################
+#
+# snowball-hdmiservice
+#
+#############################################################
+SNOWBALL_HDMISERVICE_VERSION = f75c99d1c52707240a78b4ba78e41d20d3aa3b08
+SNOWBALL_HDMISERVICE_SITE = git://igloocommunity.org/git/bsp/hdmiservice.git
+SNOWBALL_HDMISERVICE_LICENSE = MIT
+SNOWBALL_HDMISERVICE_LICENSE_FILES = debian/copyright
+SNOWBALL_HDMISERVICE_INSTALL_STAGING = YES
+
+define SNOWBALL_HDMISERVICE_BUILD_CMDS
+	$(MAKE) -C $(@D) CC="$(TARGET_CC) $(TARGET_CFLAGS)" 	
+endef
+
+define SNOWBALL_HDMISERVICE_INSTALL_STAGING_CMDS
+	$(MAKE) -C $(@D) CC="$(TARGET_CC) $(TARGET_CFLAGS)" DESTDIR=$(STAGING_DIR) install
+endef
+
+define SNOWBALL_HDMISERVICE_INSTALL_TARGET_CMDS
+	$(MAKE) -C $(@D) CC="$(TARGET_CC) $(TARGET_CFLAGS)" DESTDIR=$(TARGET_DIR) install
+endef
+
+define SNOWBALL_HDMISERVICE_UNINSTALL_STAGING_CMDS
+	rm -f $(STAGING_DIR)/usr/lib/hdmiservice.so
+	rm -f $(STAGING_DIR)/usr/bin/hdmistart
+	rm -f $(STAGING_DIR)/usr/include/hdmi_service_api.h
+	rm -f $(STAGING_DIR)/usr/include/hdmi_service_local.h
+endef
+
+define SNOWBALL_HDMISERVICE_UNINSTALL_TARGET_CMDS
+	rm -f $(TARGET_DIR)/usr/lib/hdmiservice.so
+	rm -f $(TARGET_DIR)/usr/bin/hdmistart
+endef
+
+define SNOWBALL_HDMISERVICE_CLEAN_CMDS
+	$(MAKE) -C $(@D) clean
+endef
+
+
+$(eval $(generic-package))

package/snowball-init/Config.in

@@ -0,0 +1,14 @@
+config BR2_PACKAGE_SNOWBALL_INIT
+	bool "snowball-init"
+	# Runtime dependency, needed by snowball startup script
+	select BR2_PACKAGE_BLUEZ_UTILS
+	depends on !BR2_avr32
+	depends on BR2_USE_WCHAR # libglib2
+	depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib
+	depends on BR2_USE_MMU # dbus
+	select BR2_PACKAGE_UX500_FIRMWARE
+	help
+	  Snowball init scripts
+
+	  http://www.igloocommunity.org
+

package/snowball-init/snowball-init.mk

@@ -0,0 +1,15 @@
+#############################################################
+#
+# snowball-init
+#
+#############################################################
+SNOWBALL_INIT_VERSION = b064be21de25729039e5e54037bbdd2e25cfd5b7
+SNOWBALL_INIT_SITE = git://igloocommunity.org/git/bsp/snowball-init.git
+SNOWBALL_INIT_LICENSE = BSD-4c
+SNOWBALL_INIT_LICENSE_FILES = debian/copyright
+
+define SNOWBALL_INIT_INSTALL_TARGET_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/snowball $(TARGET_DIR)/etc/init.d/S50snowball
+endef
+
+$(eval $(generic-package))

package/ux500-firmware/Config.in

@@ -0,0 +1,7 @@
+config BR2_PACKAGE_UX500_FIRMWARE
+	bool "ux500-firmware"
+	help
+	  This package provides various binary firmware files (closed binary blobs)
+	  for the Azurewave AW-NH580 combo module (wifi, bt, gps).
+
+	  https://launchpad.net/~igloocommunity-maintainers/+archive/snowball/+files/

package/ux500-firmware/ux500-firmware.mk

@@ -0,0 +1,22 @@
+#############################################################
+#
+# ux500-firmware
+#
+#############################################################
+UX500_FIRMWARE_VERSION = 1.1.3-6
+UX500_FIRMWARE_SOURCE = ux500-firmware_$(UX500_FIRMWARE_VERSION)linaro1.tar.gz
+UX500_FIRMWARE_SITE = https://launchpad.net/~igloocommunity-maintainers/+archive/snowball/+files/
+UX500_FIRMWARE_LICENSE = Snowball click-wrap license
+UX500_FIRMWARE_LICENSE_FILES = license.txt 
+UX500_FIRMWARE_REDISTRIBUTE = NO
+
+# The CG2900 linux driver has to load firmware named CG29XX_* but the firmware
+# filenames contained in this package are CG2900_* hence the code below
+define UX500_FIRMWARE_INSTALL_TARGET_CMDS
+	$(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
+	for f in $(TARGET_DIR)/lib/firmware/CG2900* ; do \
+		mv $$f $${f/CG2900/CG29XX}; \
+	done
+endef
+
+$(eval $(generic-package))

toolchain/toolchain-external/Config.in

@@ -3,8 +3,8 @@ if BR2_TOOLCHAIN_EXTERNAL
 choice
 	prompt "Toolchain"
 
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10
-	bool "Linaro 2012.10"
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_11
+	bool "Linaro 2012.11"
 	depends on BR2_arm
 	depends on BR2_cortex_a8 || BR2_cortex_a9
 	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
@@ -12,7 +12,7 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10
 	select BR2_INSTALL_LIBSTDCPP
 	help
 	  Linaro toolchain for the ARM architecture. It uses Linaro
-	  GCC 2012.10 (based on gcc 4.7), Linaro GDB 2012.10 (based on
+	  GCC 2012.11 (based on gcc 4.7), Linaro GDB 2012.10 (based on
 	  GDB 7.5), eglibc 2.15. It generates code that runs on all
 	  Cortex-A profile devices, but tuned for the Cortex-A9. The
 	  code generated is Thumb 2, with the hard floating point
@@ -20,8 +20,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10
 
 	  To use this toolchain, you must disable soft float usage.
 
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09
-	bool "Linaro 2012.09"
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10
+	bool "Linaro 2012.10"
 	depends on BR2_arm
 	depends on BR2_cortex_a8 || BR2_cortex_a9
 	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
@@ -29,7 +29,7 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09
 	select BR2_INSTALL_LIBSTDCPP
 	help
 	  Linaro toolchain for the ARM architecture. It uses Linaro
-	  GCC 2012.09 (based on gcc 4.7), Linaro GDB 2012.09 (based on
+	  GCC 2012.10 (based on gcc 4.7), Linaro GDB 2012.10 (based on
 	  GDB 7.5), eglibc 2.15. It generates code that runs on all
 	  Cortex-A profile devices, but tuned for the Cortex-A9. The
 	  code generated is Thumb 2, with the hard floating point
@@ -37,8 +37,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09
 
 	  To use this toolchain, you must disable soft float usage.
 
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_08
-	bool "Linaro 2012.08"
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09
+	bool "Linaro 2012.09"
 	depends on BR2_arm
 	depends on BR2_cortex_a8 || BR2_cortex_a9
 	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
@@ -46,14 +46,18 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_08
 	select BR2_INSTALL_LIBSTDCPP
 	help
 	  Linaro toolchain for the ARM architecture. It uses Linaro
-	  GCC 2012.08 (based on gcc 4.7), Linaro GDB 2012.06 (based on
-	  GDB 7.4), eglibc 2.15. It generates code that runs on all
+	  GCC 2012.09 (based on gcc 4.7), Linaro GDB 2012.09 (based on
+	  GDB 7.5), eglibc 2.15. It generates code that runs on all
 	  Cortex-A profile devices, but tuned for the Cortex-A9. The
 	  code generated is Thumb 2, with the hard floating point
 	  calling convention, and uses the VFPv3-D16 FPU instructions.
 
 	  To use this toolchain, you must disable soft float usage.
 
+comment "Linaro toolchains available for Cortex-A{8,9}"
+	depends on BR2_arm
+	depends on !BR2_cortex_a8 && !BR2_cortex_a9
+
 config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203
 	bool "Sourcery CodeBench ARM 2012.03"
 	depends on BR2_arm
@@ -624,9 +628,9 @@ config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX
 
 config BR2_TOOLCHAIN_EXTERNAL_PREFIX
 	string
-	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_08
 	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09
 	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10
+	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_11
 	default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201103
 	default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201109
 	default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203

toolchain/toolchain-external/ext-tool.mk

@@ -184,15 +184,15 @@ TOOLCHAIN_EXTERNAL_SOURCE=arm-2011.09-70-arm-none-linux-gnueabi-i686-pc-linux-gn
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203),y)
 TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi/
 TOOLCHAIN_EXTERNAL_SOURCE=arm-2012.03-57-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_08),y)
-TOOLCHAIN_EXTERNAL_SITE=https://launchpad.net/linaro-toolchain-binaries/trunk/2012.08/+download/
-TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-2012.08-20120827_linux.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09),y)
 TOOLCHAIN_EXTERNAL_SITE=https://launchpad.net/linaro-toolchain-binaries/trunk/2012.09/+download/
 TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-2012.09-20120921_linux.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10),y)
 TOOLCHAIN_EXTERNAL_SITE=https://launchpad.net/linaro-toolchain-binaries/trunk/2012.10/+download/
 TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-4.7-2012.10-20121022_linux.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_11),y)
+TOOLCHAIN_EXTERNAL_SITE=https://launchpad.net/linaro-toolchain-binaries/trunk/2012.11/+download/
+TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-4.7-2012.11-20121123_linux.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44),y)
 TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package7401/public/mips-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE=mips-4.4-303-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2