cut 2.16.91.0.3 and 2.16.91.0.4

toolchain/binutils/2.16.91.0.3/100-uclibc-conf.patch

@@ -1,200 +0,0 @@
-diff -Nurp binutils-2.16.91.0.2.orig/bfd/configure binutils-2.16.91.0.2/bfd/configure
---- binutils-2.16.91.0.2.orig/bfd/configure	2005-07-20 15:27:27.000000000 -0400
-+++ binutils-2.16.91.0.2/bfd/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3585,6 +3585,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -Nurp binutils-2.16.91.0.2.orig/binutils/configure binutils-2.16.91.0.2/binutils/configure
---- binutils-2.16.91.0.2.orig/binutils/configure	2005-07-20 15:27:27.000000000 -0400
-+++ binutils-2.16.91.0.2/binutils/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3420,6 +3420,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -Nurp binutils-2.16.91.0.2.orig/configure binutils-2.16.91.0.2/configure
---- binutils-2.16.91.0.2.orig/configure	2005-07-20 15:27:26.000000000 -0400
-+++ binutils-2.16.91.0.2/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -1130,7 +1130,7 @@ no)
-     ;;
- "")
-     case "${target}" in
--    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
-+    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu | *-*-linux-uclibc*)
-         # Enable libmudflap by default in GNU and friends.
- 	;;
-     *-*-freebsd*)
-@@ -1235,7 +1235,7 @@ case "${target}" in
-   am33_2.0-*-linux*)
-     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
-     ;;
--  sh-*-linux*)
-+  sh*-*-linux*)
-     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
-     ;;    
-   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-@@ -1530,7 +1530,7 @@ case "${target}" in
-   romp-*-*)
-     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
-     ;;
--  sh-*-* | sh64-*-*)
-+  sh*-*-* | sh64-*-*)
-     case "${host}" in
-       i[3456789]86-*-vsta) ;; # don't add gprof back in
-       i[3456789]86-*-go32*) ;; # don't add gprof back in
-diff -Nurp binutils-2.16.91.0.2.orig/configure.in binutils-2.16.91.0.2/configure.in
---- binutils-2.16.91.0.2.orig/configure.in	2005-07-20 15:27:26.000000000 -0400
-+++ binutils-2.16.91.0.2/configure.in	2005-08-02 00:17:47.000000000 -0400
-@@ -341,7 +341,7 @@ no)
-     ;;
- "")
-     case "${target}" in
--    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
-+    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu | *-*-linux-uclibc*)
-         # Enable libmudflap by default in GNU and friends.
- 	;;
-     *-*-freebsd*)
-@@ -446,7 +446,7 @@ case "${target}" in
-   am33_2.0-*-linux*)
-     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
-     ;;
--  sh-*-linux*)
-+  sh*-*-linux*)
-     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
-     ;;    
-   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-@@ -741,7 +741,7 @@ case "${target}" in
-   romp-*-*)
-     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
-     ;;
--  sh-*-* | sh64-*-*)
-+  sh*-*-* | sh64-*-*)
-     case "${host}" in
-       i[[3456789]]86-*-vsta) ;; # don't add gprof back in
-       i[[3456789]]86-*-go32*) ;; # don't add gprof back in
-diff -Nurp binutils-2.16.91.0.2.orig/gas/configure binutils-2.16.91.0.2/gas/configure
---- binutils-2.16.91.0.2.orig/gas/configure	2005-07-20 15:27:27.000000000 -0400
-+++ binutils-2.16.91.0.2/gas/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3421,6 +3421,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -Nurp binutils-2.16.91.0.2.orig/gprof/configure binutils-2.16.91.0.2/gprof/configure
---- binutils-2.16.91.0.2.orig/gprof/configure	2005-04-29 13:50:29.000000000 -0400
-+++ binutils-2.16.91.0.2/gprof/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3419,6 +3419,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -Nurp binutils-2.16.91.0.2.orig/ld/configure binutils-2.16.91.0.2/ld/configure
---- binutils-2.16.91.0.2.orig/ld/configure	2005-06-22 16:53:35.000000000 -0400
-+++ binutils-2.16.91.0.2/ld/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3422,6 +3422,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -Nurp binutils-2.16.91.0.2.orig/libtool.m4 binutils-2.16.91.0.2/libtool.m4
---- binutils-2.16.91.0.2.orig/libtool.m4	2005-07-20 15:27:26.000000000 -0400
-+++ binutils-2.16.91.0.2/libtool.m4	2005-08-02 00:17:47.000000000 -0400
-@@ -645,6 +645,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-diff -Nurp binutils-2.16.91.0.2.orig/ltconfig binutils-2.16.91.0.2/ltconfig
---- binutils-2.16.91.0.2.orig/ltconfig	2005-07-20 15:27:26.000000000 -0400
-+++ binutils-2.16.91.0.2/ltconfig	2005-08-02 00:17:47.000000000 -0400
-@@ -602,6 +602,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-
- 
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
- case $host_os in
-+linux-uclibc*) ;;
- linux-gnu*) ;;
- linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
- esac
-@@ -1270,6 +1271,23 @@ linux-gnu*)
-   dynamic_linker='GNU/Linux ld.so'
-   ;;
- 
-+linux-uclibc*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+  soname_spec='${libname}${release}.so$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+  # Assume using the uClibc dynamic linker.
-+  dynamic_linker="uClibc ld.so"
-+  ;;
-+
- netbsd*)
-   need_lib_prefix=no
-   need_version=no
-diff -Nurp binutils-2.16.91.0.2.orig/opcodes/configure binutils-2.16.91.0.2/opcodes/configure
---- binutils-2.16.91.0.2.orig/opcodes/configure	2005-07-20 15:27:28.000000000 -0400
-+++ binutils-2.16.91.0.2/opcodes/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3588,6 +3588,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'

toolchain/binutils/2.16.91.0.3/300-001_ld_makefile_patch.patch

@@ -1,50 +0,0 @@
-#!/bin/sh -e
-## 001_ld_makefile_patch.dpatch
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Description: correct where ld scripts are installed
-## DP: Author: Chris Chimelis <chris@debian.org>
-## DP: Upstream status: N/A
-## DP: Date: ??
-
-if [ $# -ne 1 ]; then
-    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-    exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
-       -patch) patch $patch_opts -p1 < $0;;
-       -unpatch) patch $patch_opts -p1 -R < $0;;
-        *)
-                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-                exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
---- binutils-2.16.91.0.1/ld/Makefile.am
-+++ binutils-2.16.91.0.1/ld/Makefile.am
-@@ -20,7 +20,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- 
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
---- binutils-2.16.91.0.1/ld/Makefile.in
-+++ binutils-2.16.91.0.1/ld/Makefile.in
-@@ -268,7 +268,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include

toolchain/binutils/2.16.91.0.3/300-006_better_file_error.patch

@@ -1,43 +0,0 @@
-#!/bin/sh -e
-## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Specify which filename is causing an error if the filename is a
-## DP: directory. (#45832)
-
-if [ $# -ne 1 ]; then
-    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-    exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
-       -patch) patch $patch_opts -p1 < $0;;
-       -unpatch) patch $patch_opts -p1 -R < $0;;
-        *)
-                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-                exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c binutils-2.14.90.0.6/bfd/opncls.c
---- /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c	2003-07-23 16:08:09.000000000 +0100
-+++ binutils-2.14.90.0.6/bfd/opncls.c	2003-09-10 22:35:00.000000000 +0100
-@@ -150,6 +150,13 @@
- {
-   bfd *nbfd;
-   const bfd_target *target_vec;
-+  struct stat s;
-+
-+  if (stat (filename, &s) == 0)
-+    if (S_ISDIR(s.st_mode)) {
-+      bfd_set_error (bfd_error_file_not_recognized);
-+      return NULL;
-+    }
- 
-   nbfd = _bfd_new_bfd ();
-   if (nbfd == NULL)

toolchain/binutils/2.16.91.0.3/300-012_check_ldrunpath_length.patch

@@ -1,47 +0,0 @@
-#!/bin/sh -e
-## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for
-## DP: cases where -rpath isn't specified. (#151024)
-
-if [ $# -ne 1 ]; then
-    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-    exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
-       -patch) patch $patch_opts -p1 < $0;;
-       -unpatch) patch $patch_opts -p1 -R < $0;;
-        *)
-                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-                exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em binutils-2.15/ld/emultempl/elf32.em
---- /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em	2004-05-21 23:12:58.000000000 +0100
-+++ binutils-2.15/ld/emultempl/elf32.em	2004-05-21 23:12:59.000000000 +0100
-@@ -692,6 +692,8 @@
- 	      && command_line.rpath == NULL)
- 	    {
- 	      lib_path = (const char *) getenv ("LD_RUN_PATH");
-+	      if ((lib_path) && (strlen (lib_path) == 0))
-+		  lib_path = NULL;
- 	      if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- 						      force))
- 		break;
-@@ -871,6 +873,8 @@
-   rpath = command_line.rpath;
-   if (rpath == NULL)
-     rpath = (const char *) getenv ("LD_RUN_PATH");
-+  if ((rpath) && (strlen (rpath) == 0))
-+      rpath = NULL;
-   if (! (bfd_elf_size_dynamic_sections
- 	 (output_bfd, command_line.soname, rpath,
- 	  command_line.filter_shlib,

toolchain/binutils/2.16.91.0.3/400-mips-ELF_MAXPAGESIZE-4K.patch

@@ -1,26 +0,0 @@
---- binutils/bfd/elf32-mips.c~
-+++ binutils/bfd/elf32-mips.c
-@@ -1613,7 +1613,9 @@
- 
- /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
-    page sizes of up to that limit, so we need to respect it.  */
--#define ELF_MAXPAGESIZE			0x10000
-+/*#define ELF_MAXPAGESIZE			0x10000*/
-+/* Use 4K to shrink the elf header.  NOT for general use! */
-+#define ELF_MAXPAGESIZE			0x1000
- #define elf32_bed			elf32_tradbed
- 
- /* Include the target file again for this target.  */
---- binutils/bfd/elfn32-mips.c~
-+++ binutils/bfd/elfn32-mips.c
-@@ -2399,7 +2399,9 @@
- 
- /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
-    page sizes of up to that limit, so we need to respect it.  */
--#define ELF_MAXPAGESIZE			0x10000
-+/*#define ELF_MAXPAGESIZE			0x10000*/
-+/* Use 4K to shrink the elf header.  NOT for general use! */
-+#define ELF_MAXPAGESIZE			0x1000
- #define elf32_bed			elf32_tradbed
- 
- /* Include the target file again for this target.  */

toolchain/binutils/2.16.91.0.3/702-binutils-skip-comments.patch

@@ -1,93 +0,0 @@
-Retrieved from http://sources.redhat.com/ml/binutils/2004-04/msg00646.html
-Fixes
-localealias.s:544: Error: junk at end of line, first unrecognized character is `,' 
-when building glibc-2.3.2 with gcc-3.4.0 and binutils-2.15.90.0.3
-
-Paths adjusted to match crosstool's patcher.
-
-Message-Id: m3n052qw2g.fsf@whitebox.m5r.de
-From: Andreas Schwab <schwab at suse dot de>
-To: Nathan Sidwell <nathan at codesourcery dot com>
-Cc: Ian Lance Taylor <ian at wasabisystems dot com>, binutils at sources dot redhat dot com
-Date: Fri, 23 Apr 2004 22:27:19 +0200
-Subject: Re: demand_empty_rest_of_line and ignore_rest_of_line
-
-Nathan Sidwell <nathan@codesourcery.com> writes:
-
-> Index: read.c
-> ===================================================================
-> RCS file: /cvs/src/src/gas/read.c,v
-> retrieving revision 1.76
-> diff -c -3 -p -r1.76 read.c
-> *** read.c	12 Mar 2004 17:48:12 -0000	1.76
-> --- read.c	18 Mar 2004 09:56:05 -0000
-> *************** read_a_source_file (char *name)
-> *** 1053,1059 ****
->   #endif
->   	  input_line_pointer--;
->   	  /* Report unknown char as ignored.  */
-> ! 	  ignore_rest_of_line ();
->   	}
->   
->   #ifdef md_after_pass_hook
-> --- 1053,1059 ----
->   #endif
->   	  input_line_pointer--;
->   	  /* Report unknown char as ignored.  */
-> ! 	  demand_empty_rest_of_line ();
->   	}
->   
->   #ifdef md_after_pass_hook
-
-This means that the unknown character is no longer ignored, despite the
-comment.  As a side effect a line starting with a line comment character
-not followed by APP in NO_APP mode now triggers an error instead of just a
-warning, breaking builds of glibc on m68k-linux.  Earlier in
-read_a_source_file where #APP is handled there is another comment that
-claims that unknown comments are ignored, when in fact they aren't (only
-the initial line comment character is skipped).
-
-Note that the presence of #APP will mess up the line counters, but
-that appears to be difficult to fix.
-
-Andreas.
-
-2004-04-23  Andreas Schwab  <schwab@suse.de>
-
-	* read.c (read_a_source_file): Ignore unknown text after line
-	comment character.  Fix misleading comment.
-
---- binutils/gas/read.c.~1.78.~	2004-04-23 08:58:23.000000000 +0200
-+++ binutils/gas/read.c	2004-04-23 21:49:01.000000000 +0200
-@@ -950,10 +950,14 @@ read_a_source_file (char *name)
- 	      unsigned int new_length;
- 	      char *tmp_buf = 0;
- 
--	      bump_line_counters ();
- 	      s = input_line_pointer;
- 	      if (strncmp (s, "APP\n", 4))
--		continue;	/* We ignore it */
-+		{
-+		  /* We ignore it */
-+		  ignore_rest_of_line ();
-+		  continue;
-+		}
-+	      bump_line_counters ();
- 	      s += 4;
- 
- 	      sb_new (&sbuf);
-@@ -1052,7 +1056,7 @@ read_a_source_file (char *name)
- 	    continue;
- #endif
- 	  input_line_pointer--;
--	  /* Report unknown char as ignored.  */
-+	  /* Report unknown char as error.  */
- 	  demand_empty_rest_of_line ();
- 	}
- 
-
--- 
-Andreas Schwab, SuSE Labs, schwab@suse.de
-SuSE Linux AG, Maxfeldstra&#xC3;e 5, 90409 N&#xC3;rnberg, Germany
-Key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
-"And now for something completely different."

toolchain/binutils/2.16.91.0.3/sh-flags-off-by-one.patch

@@ -1,21 +0,0 @@
-2005-08-25  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
-
-	* elf32-sh.c (sh_elf_get_flags_from_mach): Fix off-by-one error.
-
-Index: bfd/elf32-sh.c
-===================================================================
-RCS file: /cvs/src/src/bfd/elf32-sh.c,v
-retrieving revision 1.128
-retrieving revision 1.129
-diff -u -p -r1.128 -r1.129
---- binutils/bfd/elf32-sh.c	25 Aug 2005 02:32:10 -0000	1.128
-+++ binutils/bfd/elf32-sh.c	25 Aug 2005 05:10:22 -0000	1.129
-@@ -6655,7 +6655,7 @@ sh_elf_set_mach_from_flags (bfd *abfd)
- int
- sh_elf_get_flags_from_mach (unsigned long mach)
- {
--  int i = ARRAY_SIZE (sh_ef_bfd_table);
-+  int i = ARRAY_SIZE (sh_ef_bfd_table) - 1;
-   
-   for (; i>0; i--)
-     if (sh_ef_bfd_table[i] == mach)

toolchain/binutils/2.16.91.0.4/100-uclibc-conf.patch

@@ -1,200 +0,0 @@
-diff -Nurp binutils-2.16.91.0.2.orig/bfd/configure binutils-2.16.91.0.2/bfd/configure
---- binutils-2.16.91.0.2.orig/bfd/configure	2005-07-20 15:27:27.000000000 -0400
-+++ binutils-2.16.91.0.2/bfd/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3585,6 +3585,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -Nurp binutils-2.16.91.0.2.orig/binutils/configure binutils-2.16.91.0.2/binutils/configure
---- binutils-2.16.91.0.2.orig/binutils/configure	2005-07-20 15:27:27.000000000 -0400
-+++ binutils-2.16.91.0.2/binutils/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3420,6 +3420,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -Nurp binutils-2.16.91.0.2.orig/configure binutils-2.16.91.0.2/configure
---- binutils-2.16.91.0.2.orig/configure	2005-07-20 15:27:26.000000000 -0400
-+++ binutils-2.16.91.0.2/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -1130,7 +1130,7 @@ no)
-     ;;
- "")
-     case "${target}" in
--    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
-+    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu | *-*-linux-uclibc*)
-         # Enable libmudflap by default in GNU and friends.
- 	;;
-     *-*-freebsd*)
-@@ -1235,7 +1235,7 @@ case "${target}" in
-   am33_2.0-*-linux*)
-     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
-     ;;
--  sh-*-linux*)
-+  sh*-*-linux*)
-     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
-     ;;    
-   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-@@ -1530,7 +1530,7 @@ case "${target}" in
-   romp-*-*)
-     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
-     ;;
--  sh-*-* | sh64-*-*)
-+  sh*-*-* | sh64-*-*)
-     case "${host}" in
-       i[3456789]86-*-vsta) ;; # don't add gprof back in
-       i[3456789]86-*-go32*) ;; # don't add gprof back in
-diff -Nurp binutils-2.16.91.0.2.orig/configure.in binutils-2.16.91.0.2/configure.in
---- binutils-2.16.91.0.2.orig/configure.in	2005-07-20 15:27:26.000000000 -0400
-+++ binutils-2.16.91.0.2/configure.in	2005-08-02 00:17:47.000000000 -0400
-@@ -341,7 +341,7 @@ no)
-     ;;
- "")
-     case "${target}" in
--    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
-+    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu | *-*-linux-uclibc*)
-         # Enable libmudflap by default in GNU and friends.
- 	;;
-     *-*-freebsd*)
-@@ -446,7 +446,7 @@ case "${target}" in
-   am33_2.0-*-linux*)
-     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
-     ;;
--  sh-*-linux*)
-+  sh*-*-linux*)
-     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
-     ;;    
-   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-@@ -741,7 +741,7 @@ case "${target}" in
-   romp-*-*)
-     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
-     ;;
--  sh-*-* | sh64-*-*)
-+  sh*-*-* | sh64-*-*)
-     case "${host}" in
-       i[[3456789]]86-*-vsta) ;; # don't add gprof back in
-       i[[3456789]]86-*-go32*) ;; # don't add gprof back in
-diff -Nurp binutils-2.16.91.0.2.orig/gas/configure binutils-2.16.91.0.2/gas/configure
---- binutils-2.16.91.0.2.orig/gas/configure	2005-07-20 15:27:27.000000000 -0400
-+++ binutils-2.16.91.0.2/gas/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3421,6 +3421,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -Nurp binutils-2.16.91.0.2.orig/gprof/configure binutils-2.16.91.0.2/gprof/configure
---- binutils-2.16.91.0.2.orig/gprof/configure	2005-04-29 13:50:29.000000000 -0400
-+++ binutils-2.16.91.0.2/gprof/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3419,6 +3419,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -Nurp binutils-2.16.91.0.2.orig/ld/configure binutils-2.16.91.0.2/ld/configure
---- binutils-2.16.91.0.2.orig/ld/configure	2005-06-22 16:53:35.000000000 -0400
-+++ binutils-2.16.91.0.2/ld/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3422,6 +3422,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -Nurp binutils-2.16.91.0.2.orig/libtool.m4 binutils-2.16.91.0.2/libtool.m4
---- binutils-2.16.91.0.2.orig/libtool.m4	2005-07-20 15:27:26.000000000 -0400
-+++ binutils-2.16.91.0.2/libtool.m4	2005-08-02 00:17:47.000000000 -0400
-@@ -645,6 +645,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-diff -Nurp binutils-2.16.91.0.2.orig/ltconfig binutils-2.16.91.0.2/ltconfig
---- binutils-2.16.91.0.2.orig/ltconfig	2005-07-20 15:27:26.000000000 -0400
-+++ binutils-2.16.91.0.2/ltconfig	2005-08-02 00:17:47.000000000 -0400
-@@ -602,6 +602,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-
- 
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
- case $host_os in
-+linux-uclibc*) ;;
- linux-gnu*) ;;
- linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
- esac
-@@ -1270,6 +1271,23 @@ linux-gnu*)
-   dynamic_linker='GNU/Linux ld.so'
-   ;;
- 
-+linux-uclibc*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+  soname_spec='${libname}${release}.so$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+  # Assume using the uClibc dynamic linker.
-+  dynamic_linker="uClibc ld.so"
-+  ;;
-+
- netbsd*)
-   need_lib_prefix=no
-   need_version=no
-diff -Nurp binutils-2.16.91.0.2.orig/opcodes/configure binutils-2.16.91.0.2/opcodes/configure
---- binutils-2.16.91.0.2.orig/opcodes/configure	2005-07-20 15:27:28.000000000 -0400
-+++ binutils-2.16.91.0.2/opcodes/configure	2005-08-02 00:17:47.000000000 -0400
-@@ -3588,6 +3588,11 @@ linux-gnu*)
-   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'

toolchain/binutils/2.16.91.0.4/300-001_ld_makefile_patch.patch

@@ -1,50 +0,0 @@
-#!/bin/sh -e
-## 001_ld_makefile_patch.dpatch
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Description: correct where ld scripts are installed
-## DP: Author: Chris Chimelis <chris@debian.org>
-## DP: Upstream status: N/A
-## DP: Date: ??
-
-if [ $# -ne 1 ]; then
-    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-    exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
-       -patch) patch $patch_opts -p1 < $0;;
-       -unpatch) patch $patch_opts -p1 -R < $0;;
-        *)
-                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-                exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
---- binutils-2.16.91.0.1/ld/Makefile.am
-+++ binutils-2.16.91.0.1/ld/Makefile.am
-@@ -20,7 +20,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- 
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
---- binutils-2.16.91.0.1/ld/Makefile.in
-+++ binutils-2.16.91.0.1/ld/Makefile.in
-@@ -268,7 +268,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include

toolchain/binutils/2.16.91.0.4/300-006_better_file_error.patch

@@ -1,43 +0,0 @@
-#!/bin/sh -e
-## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Specify which filename is causing an error if the filename is a
-## DP: directory. (#45832)
-
-if [ $# -ne 1 ]; then
-    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-    exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
-       -patch) patch $patch_opts -p1 < $0;;
-       -unpatch) patch $patch_opts -p1 -R < $0;;
-        *)
-                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-                exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c binutils-2.14.90.0.6/bfd/opncls.c
---- /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c	2003-07-23 16:08:09.000000000 +0100
-+++ binutils-2.14.90.0.6/bfd/opncls.c	2003-09-10 22:35:00.000000000 +0100
-@@ -150,6 +150,13 @@
- {
-   bfd *nbfd;
-   const bfd_target *target_vec;
-+  struct stat s;
-+
-+  if (stat (filename, &s) == 0)
-+    if (S_ISDIR(s.st_mode)) {
-+      bfd_set_error (bfd_error_file_not_recognized);
-+      return NULL;
-+    }
- 
-   nbfd = _bfd_new_bfd ();
-   if (nbfd == NULL)

toolchain/binutils/2.16.91.0.4/300-012_check_ldrunpath_length.patch

@@ -1,47 +0,0 @@
-#!/bin/sh -e
-## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for
-## DP: cases where -rpath isn't specified. (#151024)
-
-if [ $# -ne 1 ]; then
-    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-    exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
-       -patch) patch $patch_opts -p1 < $0;;
-       -unpatch) patch $patch_opts -p1 -R < $0;;
-        *)
-                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
-                exit 1;;
-esac
-
-exit 0
-
-@DPATCH@
-diff -urNad /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em binutils-2.15/ld/emultempl/elf32.em
---- /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em	2004-05-21 23:12:58.000000000 +0100
-+++ binutils-2.15/ld/emultempl/elf32.em	2004-05-21 23:12:59.000000000 +0100
-@@ -692,6 +692,8 @@
- 	      && command_line.rpath == NULL)
- 	    {
- 	      lib_path = (const char *) getenv ("LD_RUN_PATH");
-+	      if ((lib_path) && (strlen (lib_path) == 0))
-+		  lib_path = NULL;
- 	      if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- 						      force))
- 		break;
-@@ -871,6 +873,8 @@
-   rpath = command_line.rpath;
-   if (rpath == NULL)
-     rpath = (const char *) getenv ("LD_RUN_PATH");
-+  if ((rpath) && (strlen (rpath) == 0))
-+      rpath = NULL;
-   if (! (bfd_elf_size_dynamic_sections
- 	 (output_bfd, command_line.soname, rpath,
- 	  command_line.filter_shlib,

toolchain/binutils/2.16.91.0.4/400-mips-ELF_MAXPAGESIZE-4K.patch

@@ -1,26 +0,0 @@
---- binutils/bfd/elf32-mips.c~
-+++ binutils/bfd/elf32-mips.c
-@@ -1613,7 +1613,9 @@
- 
- /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
-    page sizes of up to that limit, so we need to respect it.  */
--#define ELF_MAXPAGESIZE			0x10000
-+/*#define ELF_MAXPAGESIZE			0x10000*/
-+/* Use 4K to shrink the elf header.  NOT for general use! */
-+#define ELF_MAXPAGESIZE			0x1000
- #define elf32_bed			elf32_tradbed
- 
- /* Include the target file again for this target.  */
---- binutils/bfd/elfn32-mips.c~
-+++ binutils/bfd/elfn32-mips.c
-@@ -2399,7 +2399,9 @@
- 
- /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
-    page sizes of up to that limit, so we need to respect it.  */
--#define ELF_MAXPAGESIZE			0x10000
-+/*#define ELF_MAXPAGESIZE			0x10000*/
-+/* Use 4K to shrink the elf header.  NOT for general use! */
-+#define ELF_MAXPAGESIZE			0x1000
- #define elf32_bed			elf32_tradbed
- 
- /* Include the target file again for this target.  */

toolchain/binutils/2.16.91.0.4/702-binutils-skip-comments.patch

@@ -1,93 +0,0 @@
-Retrieved from http://sources.redhat.com/ml/binutils/2004-04/msg00646.html
-Fixes
-localealias.s:544: Error: junk at end of line, first unrecognized character is `,' 
-when building glibc-2.3.2 with gcc-3.4.0 and binutils-2.15.90.0.3
-
-Paths adjusted to match crosstool's patcher.
-
-Message-Id: m3n052qw2g.fsf@whitebox.m5r.de
-From: Andreas Schwab <schwab at suse dot de>
-To: Nathan Sidwell <nathan at codesourcery dot com>
-Cc: Ian Lance Taylor <ian at wasabisystems dot com>, binutils at sources dot redhat dot com
-Date: Fri, 23 Apr 2004 22:27:19 +0200
-Subject: Re: demand_empty_rest_of_line and ignore_rest_of_line
-
-Nathan Sidwell <nathan@codesourcery.com> writes:
-
-> Index: read.c
-> ===================================================================
-> RCS file: /cvs/src/src/gas/read.c,v
-> retrieving revision 1.76
-> diff -c -3 -p -r1.76 read.c
-> *** read.c	12 Mar 2004 17:48:12 -0000	1.76
-> --- read.c	18 Mar 2004 09:56:05 -0000
-> *************** read_a_source_file (char *name)
-> *** 1053,1059 ****
->   #endif
->   	  input_line_pointer--;
->   	  /* Report unknown char as ignored.  */
-> ! 	  ignore_rest_of_line ();
->   	}
->   
->   #ifdef md_after_pass_hook
-> --- 1053,1059 ----
->   #endif
->   	  input_line_pointer--;
->   	  /* Report unknown char as ignored.  */
-> ! 	  demand_empty_rest_of_line ();
->   	}
->   
->   #ifdef md_after_pass_hook
-
-This means that the unknown character is no longer ignored, despite the
-comment.  As a side effect a line starting with a line comment character
-not followed by APP in NO_APP mode now triggers an error instead of just a
-warning, breaking builds of glibc on m68k-linux.  Earlier in
-read_a_source_file where #APP is handled there is another comment that
-claims that unknown comments are ignored, when in fact they aren't (only
-the initial line comment character is skipped).
-
-Note that the presence of #APP will mess up the line counters, but
-that appears to be difficult to fix.
-
-Andreas.
-
-2004-04-23  Andreas Schwab  <schwab@suse.de>
-
-	* read.c (read_a_source_file): Ignore unknown text after line
-	comment character.  Fix misleading comment.
-
---- binutils/gas/read.c.~1.78.~	2004-04-23 08:58:23.000000000 +0200
-+++ binutils/gas/read.c	2004-04-23 21:49:01.000000000 +0200
-@@ -950,10 +950,14 @@ read_a_source_file (char *name)
- 	      unsigned int new_length;
- 	      char *tmp_buf = 0;
- 
--	      bump_line_counters ();
- 	      s = input_line_pointer;
- 	      if (strncmp (s, "APP\n", 4))
--		continue;	/* We ignore it */
-+		{
-+		  /* We ignore it */
-+		  ignore_rest_of_line ();
-+		  continue;
-+		}
-+	      bump_line_counters ();
- 	      s += 4;
- 
- 	      sb_new (&sbuf);
-@@ -1052,7 +1056,7 @@ read_a_source_file (char *name)
- 	    continue;
- #endif
- 	  input_line_pointer--;
--	  /* Report unknown char as ignored.  */
-+	  /* Report unknown char as error.  */
- 	  demand_empty_rest_of_line ();
- 	}
- 
-
--- 
-Andreas Schwab, SuSE Labs, schwab@suse.de
-SuSE Linux AG, Maxfeldstra&#xC3;e 5, 90409 N&#xC3;rnberg, Germany
-Key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
-"And now for something completely different."

toolchain/binutils/2.16.91.0.4/990-binutils-ctors_comment-typo.patch

@@ -1,108 +0,0 @@
-diff -ruNp binutils-2.16.91.0.4.oorig/ld/scripttempl/armbpabi.sc binutils/ld/scripttempl/armbpabi.sc
---- binutils-2.16.91.0.4.oorig/ld/scripttempl/armbpabi.sc	2005-11-13 18:16:37.000000000 +0100
-+++ binutils/ld/scripttempl/armbpabi.sc	2005-12-06 13:46:28.000000000 +0100
-@@ -80,7 +80,7 @@ CTOR=".ctors        ${CONSTRUCTING-0} : 
-     KEEP (*crtbegin*.o(.ctors))
- 
-     /* We don't want to include the .ctor section from
--       from the crtend.o file until after the sorted ctors.
-+       the crtend.o file until after the sorted ctors.
-        The .ctor section from the crtend file contains the
-        end of ctors marker and it must be last */
- 
-diff -ruNp binutils-2.16.91.0.4.oorig/ld/scripttempl/elf.sc binutils/ld/scripttempl/elf.sc
---- binutils-2.16.91.0.4.oorig/ld/scripttempl/elf.sc	2005-11-13 18:16:37.000000000 +0100
-+++ binutils/ld/scripttempl/elf.sc	2005-12-06 13:47:36.000000000 +0100
-@@ -205,7 +205,7 @@ CTOR=".ctors        ${CONSTRUCTING-0} : 
-     KEEP (*crtbegin*.o(.ctors))
- 
-     /* We don't want to include the .ctor section from
--       from the crtend.o file until after the sorted ctors.
-+       the crtend.o file until after the sorted ctors.
-        The .ctor section from the crtend file contains the
-        end of ctors marker and it must be last */
- 
-diff -ruNp binutils-2.16.91.0.4.oorig/ld/scripttempl/elf32sh-symbian.sc binutils/ld/scripttempl/elf32sh-symbian.sc
---- binutils-2.16.91.0.4.oorig/ld/scripttempl/elf32sh-symbian.sc	2005-11-13 18:16:37.000000000 +0100
-+++ binutils/ld/scripttempl/elf32sh-symbian.sc	2005-12-06 13:48:10.000000000 +0100
-@@ -99,7 +99,7 @@ CTOR=".ctors     ALIGN(4) : 
-     KEEP (*crtbegin*.o(.ctors))
- 
-     /* We don't want to include the .ctor section from
--       from the crtend.o file until after the sorted ctors.
-+       the crtend.o file until after the sorted ctors.
-        The .ctor section from the crtend file contains the
-        end of ctors marker and it must be last */
- 
-diff -ruNp binutils-2.16.91.0.4.oorig/ld/scripttempl/elf_chaos.sc binutils/ld/scripttempl/elf_chaos.sc
---- binutils-2.16.91.0.4.oorig/ld/scripttempl/elf_chaos.sc	2005-08-22 21:27:45.000000000 +0200
-+++ binutils/ld/scripttempl/elf_chaos.sc	2005-12-06 13:48:16.000000000 +0100
-@@ -118,7 +118,7 @@ CTOR="
-     KEEP (*crtbegin*.o(.ctors))
- 
-     /* We don't want to include the .ctor section from
--       from the crtend.o file until after the sorted ctors.
-+       the crtend.o file until after the sorted ctors.
-        The .ctor section from the crtend file contains the
-        end of ctors marker and it must be last */
- 
-diff -ruNp binutils-2.16.91.0.4.oorig/ld/scripttempl/elfd10v.sc binutils/ld/scripttempl/elfd10v.sc
---- binutils-2.16.91.0.4.oorig/ld/scripttempl/elfd10v.sc	2003-05-05 23:46:50.000000000 +0200
-+++ binutils/ld/scripttempl/elfd10v.sc	2005-12-06 13:48:26.000000000 +0100
-@@ -23,7 +23,7 @@ CTOR=".ctors ${CONSTRUCTING-0} : 
-     KEEP (*crtbegin*.o(.ctors))
- 
-     /* We don't want to include the .ctor section from
--       from the crtend.o file until after the sorted ctors.
-+       the crtend.o file until after the sorted ctors.
-        The .ctor section from the crtend file contains the
-        end of ctors marker and it must be last */
- 
-diff -ruNp binutils-2.16.91.0.4.oorig/ld/scripttempl/elfd30v.sc binutils/ld/scripttempl/elfd30v.sc
---- binutils-2.16.91.0.4.oorig/ld/scripttempl/elfd30v.sc	2003-05-05 23:46:50.000000000 +0200
-+++ binutils/ld/scripttempl/elfd30v.sc	2005-12-06 13:48:36.000000000 +0100
-@@ -15,7 +15,7 @@ CTOR=".ctors ${CONSTRUCTING-0} : 
-     KEEP (*crtbegin*.o(.ctors))
- 
-     /* We don't want to include the .ctor section from
--       from the crtend.o file until after the sorted ctors.
-+       the crtend.o file until after the sorted ctors.
-        The .ctor section from the crtend file contains the
-        end of ctors marker and it must be last */
- 
-diff -ruNp binutils-2.16.91.0.4.oorig/ld/scripttempl/elfxtensa.sc binutils/ld/scripttempl/elfxtensa.sc
---- binutils-2.16.91.0.4.oorig/ld/scripttempl/elfxtensa.sc	2005-11-13 18:16:37.000000000 +0100
-+++ binutils/ld/scripttempl/elfxtensa.sc	2005-12-06 13:48:53.000000000 +0100
-@@ -176,7 +176,7 @@ CTOR=".ctors        ${CONSTRUCTING-0} : 
-     KEEP (*crtbegin*.o(.ctors))
- 
-     /* We don't want to include the .ctor section from
--       from the crtend.o file until after the sorted ctors.
-+       the crtend.o file until after the sorted ctors.
-        The .ctor section from the crtend file contains the
-        end of ctors marker and it must be last */
- 
-diff -ruNp binutils-2.16.91.0.4.oorig/ld/scripttempl/iq2000.sc binutils/ld/scripttempl/iq2000.sc
---- binutils-2.16.91.0.4.oorig/ld/scripttempl/iq2000.sc	2005-08-22 21:27:45.000000000 +0200
-+++ binutils/ld/scripttempl/iq2000.sc	2005-12-06 13:49:38.000000000 +0100
-@@ -86,7 +86,7 @@ CTOR=".ctors ${CONSTRUCTING-0} : 
-     KEEP (*crtbegin*.o(.ctors))
- 
-     /* We don't want to include the .ctor section from
--       from the crtend.o file until after the sorted ctors.
-+       the crtend.o file until after the sorted ctors.
-        The .ctor section from the crtend file contains the
-        end of ctors marker and it must be last */
- 
-diff -ruNp binutils-2.16.91.0.4.oorig/ld/scripttempl/xstormy16.sc binutils/ld/scripttempl/xstormy16.sc
---- binutils-2.16.91.0.4.oorig/ld/scripttempl/xstormy16.sc	2005-08-22 21:27:45.000000000 +0200
-+++ binutils/ld/scripttempl/xstormy16.sc	2005-12-06 13:50:32.000000000 +0100
-@@ -70,7 +70,7 @@ CTOR=".ctors ${CONSTRUCTING-0} : 
-     KEEP (*crtbegin*.o(.ctors))
- 
-     /* We don't want to include the .ctor section from
--       from the crtend.o file until after the sorted ctors.
-+       the crtend.o file until after the sorted ctors.
-        The .ctor section from the crtend file contains the
-        end of ctors marker and it must be last */
- 

toolchain/binutils/Config.in

@@ -31,14 +31,6 @@ choice
 		depends !BR2_nios2
 		bool "binutils 2.16.90.0.3"
 
-	config BR2_BINUTILS_VERSION_2_16_91_0_3
-		depends !BR2_nios2
-		bool "binutils 2.16.91.0.3"
-
-	config BR2_BINUTILS_VERSION_2_16_91_0_4
-		depends !BR2_nios2
-		bool "binutils 2.16.91.0.4"
-
 	config BR2_BINUTILS_VERSION_2_16_91_0_5
 		depends !BR2_nios2
 		bool "binutils 2.16.91.0.5"
@@ -69,8 +61,6 @@ config BR2_BINUTILS_VERSION
 	default "2.15.97"         if BR2_BINUTILS_VERSION_2_15_97
 	default "2.16.1"          if BR2_BINUTILS_VERSION_2_16_1
 	default "2.16.90.0.3"     if BR2_BINUTILS_VERSION_2_16_90_0_3
-	default "2.16.91.0.3"     if BR2_BINUTILS_VERSION_2_16_91_0_3
-	default "2.16.91.0.4"     if BR2_BINUTILS_VERSION_2_16_91_0_4
 	default "2.16.91.0.5"     if BR2_BINUTILS_VERSION_2_16_91_0_5
 	default "2.16.91.0.6"     if BR2_BINUTILS_VERSION_2_16_91_0_6
 	default "2.16.91.0.7"     if BR2_BINUTILS_VERSION_2_16_91_0_7