apf27: update configuration

- move kernel 3.8.3 to 3.12.5
- enable pwm_imx in the kernel configuration
- add u-boot

Acked-by: Eric Jarrige <eric.jarrige@armadeus.org>
Acked-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/armadeus/apf27/linux-3.8.config → board/armadeus/apf27/linux-3.12.config

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -200,6 +199,8 @@ CONFIG_IMX_SDMA=y
 CONFIG_IMX_DMA=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=m
+CONFIG_PWM=y
+CONFIG_PWM_IMX=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y

configs/armadeus_apf27_defconfig

@@ -4,7 +4,7 @@ BR2_arm926t=y
 
 # Lock down headers to avoid breaking with new defaults
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.8.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12.5"
 
 # System
 BR2_TARGET_GENERIC_HOSTNAME="apf27"
@@ -20,9 +20,13 @@ BR2_TARGET_ROOTFS_UBI=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/armadeus/apf27/linux-3.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/armadeus/apf27/linux-3.12.config"
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0xA0008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx27-apf27"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx27-apf27dev"
+
+# U-boot
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="apf27"