|
|
@@ -1,149 +0,0 @@
|
|
|
-#############################################################
|
|
|
-#
|
|
|
-# U-Boot
|
|
|
-#
|
|
|
-#############################################################
|
|
|
-U_BOOT_VERSION:=1.3.0
|
|
|
-U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
|
|
|
-U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot
|
|
|
-U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
|
|
|
-U_BOOT_CAT:=$(BZCAT)
|
|
|
-U_BOOT_BIN:=u-boot.bin
|
|
|
-U_BOOT_TOOLS_BIN:=mkimage
|
|
|
-
|
|
|
-U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/configs/$(subst _config,,$(BR2_TARGET_U_BOOT_CONFIG_BOARD)).h
|
|
|
-
|
|
|
-$(DL_DIR)/$(U_BOOT_SOURCE):
|
|
|
- $(WGET) -P $(DL_DIR) $(U_BOOT_SITE)/$(U_BOOT_SOURCE)
|
|
|
-
|
|
|
-$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
|
|
|
- $(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \
|
|
|
- | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
|
|
|
- toolchain/patch-kernel.sh $(U_BOOT_DIR) target/device/Atmel/u-boot/ \
|
|
|
- u-boot-$(U_BOOT_VERSION)-\*.patch\*
|
|
|
- touch $@
|
|
|
-
|
|
|
-$(U_BOOT_DIR)/.header_copied: $(U_BOOT_DIR)/.unpacked
|
|
|
-ifneq ($(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE),"")
|
|
|
- @if [ ! -f "$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)" ]; then \
|
|
|
- echo " You specified BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE,"; \
|
|
|
- echo " but the file at:"; \
|
|
|
- echo " '$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)'"; \
|
|
|
- echo " does not exist."; \
|
|
|
- echo; \
|
|
|
- echo " Configure the BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE variable."; \
|
|
|
- echo; \
|
|
|
- exit 1; \
|
|
|
- fi
|
|
|
- cp -dpf $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) $(U_BOOT_INC_CONF_FILE)
|
|
|
-endif
|
|
|
- touch $@
|
|
|
-
|
|
|
-$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied
|
|
|
-ifeq ($(strip $(BR2_TARGET_U_BOOT_CONFIG_BOARD)),"")
|
|
|
- @echo
|
|
|
- @echo " You did not specify a target u-boot config board, so u-boot"
|
|
|
- @echo " has no way of knowing which board you want to build your"
|
|
|
- @echo " bootloader for."
|
|
|
- @echo
|
|
|
- @echo " Configure the BR2_TARGET_U_BOOT_CONFIG_BOARD variable."
|
|
|
- @echo
|
|
|
- @exit 1
|
|
|
-endif
|
|
|
- $(TARGET_CONFIGURE_OPTS) \
|
|
|
- CFLAGS="$(TARGET_CFLAGS)" \
|
|
|
- LDFLAGS="$(TARGET_LDFLAGS)" \
|
|
|
- $(MAKE) -C $(U_BOOT_DIR) \
|
|
|
- $(BR2_TARGET_U_BOOT_CONFIG_BOARD)
|
|
|
- touch $@
|
|
|
-
|
|
|
-$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
|
|
|
- # Modify configuration header in $(U_BOOT_INC_CONF_FILE)
|
|
|
- @echo >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- @echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- @echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- @echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
-ifneq ($(strip $(BR2_PROJECT)),"")
|
|
|
- @echo "#define CONFIG_HOSTNAME" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- $(SED) 's,^#define.*CONFIG_HOSTNAME.*,#define CONFIG_HOSTNAME $(subst ",,$(BR2_PROJECT)),' $(U_BOOT_INC_CONF_FILE)
|
|
|
-endif
|
|
|
-ifneq ($(strip $(BR2_TARGET_U_BOOT_SERVERIP)),"")
|
|
|
- @echo "#define CONFIG_SERVERIP" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- $(SED) 's,^#define.*CONFIG_SERVERIP.*,#define CONFIG_SERVERIP $(subst ",,$(BR2_TARGET_U_BOOT_SERVERIP)),' $(U_BOOT_INC_CONF_FILE)
|
|
|
-endif
|
|
|
-ifneq ($(strip $(BR2_TARGET_U_BOOT_IPADDR)),"")
|
|
|
- @echo "#define CONFIG_IPADDR" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- $(SED) 's,^#define.*CONFIG_IPADDR.*,#define CONFIG_IPADDR $(subst ",,$(BR2_TARGET_U_BOOT_IPADDR)),' $(U_BOOT_INC_CONF_FILE)
|
|
|
-ifneq ($(strip $(BR2_TARGET_U_BOOT_GATEWAY)),"")
|
|
|
- @echo "#define CONFIG_GATEWAYIP" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- $(SED) 's,^#define.*CONFIG_GATEWAYIP.*,#define CONFIG_GATEWAYIP $(subst ",,$(BR2_TARGET_U_BOOT_GATEWAY)),' $(U_BOOT_INC_CONF_FILE)
|
|
|
-endif
|
|
|
-ifneq ($(strip $(BR2_TARGET_U_BOOT_NETMASK)),"")
|
|
|
- @echo "#define CONFIG_NETMASK" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- $(SED) 's,^#define.*CONFIG_NETMASK.*,#define CONFIG_NETMASK $(subst ",,$(BR2_TARGET_U_BOOT_NETMASK)),' $(U_BOOT_INC_CONF_FILE)
|
|
|
-endif
|
|
|
-endif # end BR2_TARGET_U_BOOT_IPADDR
|
|
|
-ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH0ADDR)),"")
|
|
|
- @echo "#define CONFIG_ETHADDR" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- $(SED) 's,^#define.*CONFIG_ETHADDR.*,#define CONFIG_ETHADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH0ADDR)),' $(U_BOOT_INC_CONF_FILE)
|
|
|
-endif
|
|
|
-ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH1ADDR)),"")
|
|
|
- @echo "#define CONFIG_ETH1ADDR" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- $(SED) 's,^#define.*CONFIG_ETH1ADDR.*,#define CONFIG_ETH1ADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH1ADDR)),' $(U_BOOT_INC_CONF_FILE)
|
|
|
-endif
|
|
|
-ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTARGS)),"")
|
|
|
- @echo "#undef CONFIG_BOOTARGS" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- @echo '#define CONFIG_BOOTARGS $(BR2_TARGET_U_BOOT_BOOTARGS)' >> $(U_BOOT_INC_CONF_FILE)
|
|
|
-endif
|
|
|
-ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTCMD)),"")
|
|
|
- @echo "#undef CONFIG_BOOTCOMMAND" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- @echo '#define CONFIG_BOOTCOMMAND $(BR2_TARGET_U_BOOT_BOOTCMD)' >> $(U_BOOT_INC_CONF_FILE)
|
|
|
-endif
|
|
|
- @echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
|
|
|
- touch $@
|
|
|
-
|
|
|
-$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
|
|
|
- $(TARGET_CONFIGURE_OPTS) \
|
|
|
- CFLAGS="$(TARGET_CFLAGS)" \
|
|
|
- LDFLAGS="$(TARGET_LDFLAGS)" \
|
|
|
- $(MAKE) -C $(U_BOOT_DIR)
|
|
|
-
|
|
|
-$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
|
|
|
- cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)
|
|
|
- cp -dpf $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN) $(STAGING_DIR)/usr/bin/
|
|
|
-
|
|
|
-u-boot: gcc $(BINARIES_DIR)/$(U_BOOT_BIN)
|
|
|
-
|
|
|
-u-boot-clean:
|
|
|
- $(MAKE) -C $(U_BOOT_DIR) clean
|
|
|
-
|
|
|
-u-boot-dirclean:
|
|
|
- rm -rf $(U_BOOT_DIR)
|
|
|
-
|
|
|
-u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
|
|
|
-
|
|
|
-#############################################################
|
|
|
-#
|
|
|
-# Toplevel Makefile options
|
|
|
-#
|
|
|
-#############################################################
|
|
|
-ifeq ($(strip $(BR2_TARGET_U_BOOT)),y)
|
|
|
-TARGETS+=u-boot
|
|
|
-endif
|
|
|
-
|
|
|
-u-boot-status:
|
|
|
- @echo
|
|
|
- @echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE)
|
|
|
- @echo
|
|
|
- @echo BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE = $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)
|
|
|
- @echo BR2_TARGET_U_BOOT_CONFIG_BOARD = $(BR2_TARGET_U_BOOT_CONFIG_BOARD)
|
|
|
- @echo BR2_TARGET_U_BOOT_SERVERIP = $(BR2_TARGET_U_BOOT_SERVERIP)
|
|
|
- @echo BR2_TARGET_U_BOOT_IPADDR = $(BR2_TARGET_U_BOOT_IPADDR)
|
|
|
- @echo BR2_TARGET_U_BOOT_GATEWAY = $(BR2_TARGET_U_BOOT_GATEWAY)
|
|
|
- @echo BR2_TARGET_U_BOOT_NETMASK = $(BR2_TARGET_U_BOOT_NETMASK)
|
|
|
- @echo BR2_TARGET_U_BOOT_ETH0ADDR = $(BR2_TARGET_U_BOOT_ETH0ADDR)
|
|
|
- @echo BR2_TARGET_U_BOOT_ETH1ADDR = $(BR2_TARGET_U_BOOT_ETH1ADDR)
|
|
|
- @echo BR2_TARGET_U_BOOT_BOOTARGS = $(BR2_TARGET_U_BOOT_BOOTARGS)
|
|
|
- @echo BR2_TARGET_U_BOOT_BOOTCMD = $(BR2_TARGET_U_BOOT_BOOTCMD)
|
|
|
- @echo
|
|
|
- @exit 0
|
John Voltz