Merge branch 'next'

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.defconfig

@@ -6,7 +6,6 @@ BR2_HAVE_DOT_CONFIG=y
 # BR2_alpha is not set
 # BR2_arm is not set
 # BR2_armeb is not set
-# BR2_avr32 is not set
 # BR2_cris is not set
 # BR2_ia64 is not set
 BR2_i386=y

arch/Config.in

@@ -53,21 +53,6 @@ config BR2_aarch64
 	  http://www.arm.com/products/processors/instruction-set-architectures/armv8-architecture.php
 	  http://en.wikipedia.org/wiki/ARM
 
-config BR2_avr32
-	bool "AVR32"
-	select BR2_SOFT_FLOAT
-	# This architecture is obsolete and complicated to maintain to
-	# do the lack of upstream support in the major toolchain
-	# components. If you're interested by AVR32, contact the
-	# Buildroot community. Otherwise, its support will be removed
-	# by the 2015.02 release.
-	depends on BR2_DEPRECATED_SINCE_2014_08
-	help
-	  The AVR32 is a 32-bit RISC microprocessor architecture designed by
-	  Atmel.
-	  http://www.atmel.com/
-	  http://en.wikipedia.org/wiki/Avr32
-
 config BR2_bfin
 	bool "Blackfin"
 	help
@@ -328,10 +313,6 @@ if BR2_aarch64
 source "arch/Config.in.aarch64"
 endif
 
-if BR2_avr32
-source "arch/Config.in.avr32"
-endif
-
 if BR2_bfin
 source "arch/Config.in.bfin"
 endif

arch/Config.in.avr32

@@ -1,11 +0,0 @@
-config BR2_ARCH
-	default "avr32"
-
-config BR2_ENDIAN
-	default "BIG"
-
-config BR2_GCC_TARGET_ARCH
-	default "ap"
-
-config BR2_ARCH_HAS_ATOMICS
-	default y

board/armadeus/apf27/linux-3.13.config → board/armadeus/apf27/linux-3.18.config

@@ -17,14 +17,11 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
-CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MACH_IMX27_DT=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -40,8 +37,6 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6=y
 CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_MCP251X=m
 CONFIG_BT=m
@@ -60,7 +55,6 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -72,13 +66,11 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
-CONFIG_PROC_DEVICETREE=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
-CONFIG_MII=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
@@ -144,8 +136,6 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -162,21 +152,21 @@ CONFIG_SND_IMX_SOC=m
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_DEBUG=y
 CONFIG_USB_ACM=y
 CONFIG_USB_PRINTER=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_DEBUG=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_FTDI_SIO=y
 CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_HID=m
-CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
 CONFIG_NEW_LEDS=y
@@ -198,7 +188,9 @@ CONFIG_DMADEVICES=y
 CONFIG_IMX_SDMA=y
 CONFIG_IMX_DMA=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_IIO=m
+CONFIG_IIO=y
+CONFIG_MAX1027=y
+CONFIG_MAX5821=y
 CONFIG_PWM=y
 CONFIG_PWM_IMX=y
 CONFIG_EXT2_FS=y
@@ -220,11 +212,13 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y

board/raspberrypi/readme.txt

@@ -1,9 +1,14 @@
-RaspberryPi
+Raspberry Pi
 
 Intro
 =====
 
-To be able to use your RaspberryPi board with the images generated by
+These instructions apply to all models of the Raspberry Pi:
+  - the original models A and B,
+  - the "enhanced" models A+ and B+,
+  - the model B2 (aka Raspberry Pi 2).
+
+To be able to use your Raspberry Pi board with the images generated by
 Buildroot, you have to choose whether you will use:
 
     * Volatile rootfs in RAM (the rootfs is an initramfs) or
@@ -96,7 +101,7 @@ Mount the partitions (adjust 'sdX' to match your SDcard device):
 Install the binaries to the SDCard
 ----------------------------------
 
-At the root of the boot partition, the RaspberryPi must find the following
+At the root of the boot partition, the Raspberry Pi must find the following
 files:
 
     * bcm2708-rpi-b.dtb         [2]

board/raspberrypi2

@@ -0,0 +1 @@
+raspberrypi

boot/barebox/barebox.mk

@@ -49,21 +49,18 @@ endif
 
 BAREBOX_MAKE_FLAGS = ARCH=$(BAREBOX_ARCH) CROSS_COMPILE="$(CCACHE) \
 	$(TARGET_CROSS)"
-
+BAREBOX_MAKE_ENV = $(TARGET_MAKE_ENV)
 
 ifeq ($(BR2_TARGET_BAREBOX_USE_DEFCONFIG),y)
-BAREBOX_SOURCE_CONFIG = $(@D)/arch/$(BAREBOX_ARCH)/configs/$(call qstrip,\
+BAREBOX_SOURCE_CONFIG = $(BAREBOX_DIR)/arch/$(BAREBOX_ARCH)/configs/$(call qstrip,\
 	$(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))_defconfig
 else ifeq ($(BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG),y)
-BAREBOX_SOURCE_CONFIG = $(BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE)
+BAREBOX_SOURCE_CONFIG = $(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE))
 endif
 
-define BAREBOX_CONFIGURE_CMDS
-	cp $(BAREBOX_SOURCE_CONFIG) \
-		$(@D)/arch/$(BAREBOX_ARCH)/configs/buildroot_defconfig
-	$(TARGET_MAKE_ENV) $(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D) \
-		buildroot_defconfig
-endef
+BAREBOX_KCONFIG_FILE = $(BAREBOX_SOURCE_CONFIG)
+BAREBOX_KCONFIG_EDITORS = menuconfig xconfig gconfig nconfig
+BAREBOX_KCONFIG_OPTS = $(BAREBOX_MAKE_FLAGS)
 
 ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
 define BAREBOX_BUILD_BAREBOXENV_CMDS
@@ -106,7 +103,7 @@ define BAREBOX_INSTALL_TARGET_CMDS
 endef
 endif
 
-$(eval $(generic-package))
+$(eval $(kconfig-package))
 
 ifeq ($(BR2_TARGET_BAREBOX),y)
 # we NEED a board defconfig file unless we're at make source
@@ -115,24 +112,4 @@ ifeq ($(BAREBOX_SOURCE_CONFIG),)
 $(error No Barebox config file. Check your BR2_TARGET_BAREBOX_BOARD_DEFCONFIG or BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE settings)
 endif
 endif
-
-barebox-menuconfig barebox-xconfig barebox-gconfig barebox-nconfig: barebox-configure
-	$(TARGET_MAKE_ENV) $(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(BAREBOX_DIR) \
-		$(subst barebox-,,$@)
-	rm -f $(BAREBOX_DIR)/.stamp_{built,target_installed,images_installed}
-
-barebox-savedefconfig: barebox-configure
-	$(TARGET_MAKE_ENV) $(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(BAREBOX_DIR) \
-		$(subst barebox-,,$@)
-
-ifeq ($(BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG),y)
-barebox-update-config: barebox-configure $(BAREBOX_DIR)/.config
-	cp -f $(BAREBOX_DIR)/.config $(BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE)
-
-barebox-update-defconfig: barebox-savedefconfig
-	cp -f $(BAREBOX_DIR)/defconfig $(BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE)
-else
-barebox-update-config: ;
-barebox-update-defconfig: ;
-endif
 endif

configs/armadeus_apf27_defconfig

@@ -4,8 +4,8 @@ BR2_arm926t=y
 
 # Lock down headers to avoid breaking with new defaults
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.13.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y
+BR2_DEFAULT_KERNEL_VERSION="3.18.6"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_18=y
 
 # System
 BR2_TARGET_GENERIC_HOSTNAME="apf27"
@@ -21,9 +21,9 @@ BR2_TARGET_ROOTFS_UBI=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.18.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/armadeus/apf27/linux-3.13.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/armadeus/apf27/linux-3.18.config"
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0xA0008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx27-apf27dev"

configs/atngw100_defconfig

@@ -1,35 +0,0 @@
-# AVR32 is deprecated
-BR2_DEPRECATED=y
-
-# Architecture
-BR2_avr32=y
-
-# Lock down kernel headers version, to match the kernel version used
-# below.
-BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.9.11"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_9=y
-
-# Filesystems
-BR2_TARGET_ROOTFS_JFFS2=y
-BR2_TARGET_ROOTFS_JFFS2_FLASH_128=y
-BR2_TARGET_ROOTFS_JFFS2_PAGESIZE=0x1000
-BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
-BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
-BR2_TARGET_ROOTFS_JFFS2_BE=y
-BR2_TARGET_ROOTFS_TAR=y
-BR2_TARGET_ROOTFS_TAR_NONE=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="atngw100"
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2010.09"
-
-# Kernel. Locked to 3.9.x, because 3.10.x fails to build with
-# relocation truncated to fit: R_AVR32_16N_PCREL against symbol
-# `_ctype'
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.11"
-BR2_LINUX_KERNEL_DEFCONFIG="atngw100"

configs/atstk100x_defconfig

@@ -1,26 +0,0 @@
-# AVR32 is deprecated
-BR2_DEPRECATED=y
-
-# Architecture
-BR2_avr32=y
-
-# Lock to same version as kernel
-BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.9.11"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_9=y
-
-# U-Boot
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="atstk1002"
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2010.09"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.11"
-BR2_LINUX_KERNEL_USE_DEFCONFIG=y
-BR2_LINUX_KERNEL_DEFCONFIG="atstk1002"
-
-# Filesystem
-BR2_TARGET_ROOTFS_TAR=y

configs/raspberrypi2_defconfig

@@ -0,0 +1,25 @@
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_ARM_EABIHF=y
+BR2_ARM_FPU_NEON_VFPV4=y
+
+BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+
+BR2_TARGET_GENERIC_GETTY_PORT="tty1"
+
+# Lock to 3.19 headers as the RPi2 kernel is based off the 3.19 branch
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.19"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_19=y
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="23c76b7f608e51258c6fca02aebeb5d588583149"
+BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
+BR2_LINUX_KERNEL_ZIMAGE=y
+
+# Install the DTB files, as the RPi2 uses the Device Tree
+BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS=y

fs/tar/tar.mk

@@ -7,7 +7,7 @@
 TAR_OPTS := $(call qstrip,$(BR2_TARGET_ROOTFS_TAR_OPTIONS))
 
 define ROOTFS_TAR_CMD
-	tar -c$(TAR_OPTS)f $@ -C $(TARGET_DIR) .
+	tar -c$(TAR_OPTS)f $@ --numeric-owner -C $(TARGET_DIR) .
 endef
 
 $(eval $(call ROOTFS_TARGET,tar))

linux/Config.in

@@ -21,7 +21,7 @@ choice
 	prompt "Kernel version"
 
 config BR2_LINUX_KERNEL_LATEST_VERSION
-	bool "3.18.6"
+	bool "3.19"
 
 config BR2_LINUX_KERNEL_SAME_AS_HEADERS
 	bool "Same as toolchain kernel headers"
@@ -109,7 +109,7 @@ config BR2_LINUX_KERNEL_CUSTOM_LOCAL_PATH
 
 config BR2_LINUX_KERNEL_VERSION
 	string
-	default "3.18.6" if BR2_LINUX_KERNEL_LATEST_VERSION
+	default "3.19" if BR2_LINUX_KERNEL_LATEST_VERSION
 	default BR2_DEFAULT_KERNEL_HEADERS if BR2_LINUX_KERNEL_SAME_AS_HEADERS
 	default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \
 		if BR2_LINUX_KERNEL_CUSTOM_VERSION
@@ -174,7 +174,7 @@ choice
 config BR2_LINUX_KERNEL_UIMAGE
 	bool "uImage"
 	depends on BR2_arc || BR2_arm || BR2_armeb || BR2_bfin || \
-		   BR2_powerpc || BR2_avr32 || BR2_sh || BR2_sh64 || \
+		   BR2_powerpc || BR2_sh || BR2_sh64 || \
 		   BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
 	select BR2_LINUX_KERNEL_UBOOT_IMAGE
 

linux/linux.mk

@@ -57,6 +57,10 @@ LINUX_MAKE_FLAGS = \
 	CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)" \
 	DEPMOD=$(HOST_DIR)/sbin/depmod
 
+LINUX_MAKE_ENV = \
+	$(TARGET_MAKE_ENV) \
+	BR_BINARIES_DIR=$(BINARIES_DIR)
+
 # Get the real Linux version, which tells us where kernel modules are
 # going to be installed in the target filesystem.
 LINUX_VERSION_PROBED = $(shell $(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) --no-print-directory -s kernelrelease)
@@ -139,11 +143,7 @@ LINUX_IMAGE_PATH = $(LINUX_DIR)/$(LINUX_IMAGE_NAME)
 else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ),y)
 LINUX_IMAGE_PATH = $(LINUX_DIR)/$(LINUX_IMAGE_NAME)
 else
-ifeq ($(KERNEL_ARCH),avr32)
-LINUX_IMAGE_PATH = $(KERNEL_ARCH_PATH)/boot/images/$(LINUX_IMAGE_NAME)
-else
 LINUX_IMAGE_PATH = $(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME)
-endif
 endif # BR2_LINUX_KERNEL_VMLINUX
 
 define LINUX_DOWNLOAD_PATCHES
@@ -173,13 +173,14 @@ LINUX_POST_PATCH_HOOKS += LINUX_APPLY_PATCHES
 ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
 KERNEL_SOURCE_CONFIG = $(KERNEL_ARCH_PATH)/configs/$(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig
 else ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
-KERNEL_SOURCE_CONFIG = $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE)
+KERNEL_SOURCE_CONFIG = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE))
 endif
 
-define LINUX_CONFIGURE_CMDS
-	$(INSTALL) -m 0644 $(KERNEL_SOURCE_CONFIG) $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig
-	$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) buildroot_defconfig
-	rm $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig
+LINUX_KCONFIG_FILE = $(KERNEL_SOURCE_CONFIG)
+LINUX_KCONFIG_EDITORS = menuconfig xconfig gconfig nconfig
+LINUX_KCONFIG_OPTS = $(LINUX_MAKE_FLAGS)
+
+define LINUX_KCONFIG_FIXUP_CMDS
 	$(if $(BR2_arm)$(BR2_armeb),
 		$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config))
 	$(if $(BR2_TARGET_ROOTFS_CPIO),
@@ -190,7 +191,7 @@ define LINUX_CONFIGURE_CMDS
 	# rebuilt using the linux-rebuild-with-initramfs target.
 	$(if $(BR2_TARGET_ROOTFS_INITRAMFS),
 		touch $(BINARIES_DIR)/rootfs.cpio
-		$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,"$(BINARIES_DIR)/rootfs.cpio",$(@D)/.config)
+		$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,"$${BR_BINARIES_DIR}/rootfs.cpio",$(@D)/.config)
 		$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_UID,0,$(@D)/.config)
 		$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_GID,0,$(@D)/.config))
 	$(if $(BR2_ROOTFS_DEVICE_CREATION_STATIC),,
@@ -224,13 +225,12 @@ define LINUX_CONFIGURE_CMDS
 		$(call KCONFIG_ENABLE_OPT,CONFIG_NF_CONNTRACK_MARK,$(@D)/.config))
 	$(if $(BR2_LINUX_KERNEL_APPENDED_DTB),
 		$(call KCONFIG_ENABLE_OPT,CONFIG_ARM_APPENDED_DTB,$(@D)/.config))
-	yes '' | $(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) oldconfig
 endef
 
 ifeq ($(BR2_LINUX_KERNEL_DTS_SUPPORT),y)
 ifeq ($(BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT),)
 define LINUX_BUILD_DTB
-	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(KERNEL_DTBS)
+	$(LINUX_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(KERNEL_DTBS)
 endef
 define LINUX_INSTALL_DTB
 	# dtbs moved from arch/<ARCH>/boot to arch/<ARCH>/boot/dts since 3.8-rc1
@@ -277,9 +277,9 @@ endif
 define LINUX_BUILD_CMDS
 	$(if $(BR2_LINUX_KERNEL_USE_CUSTOM_DTS),
 		cp $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_DTS_PATH)) $(KERNEL_ARCH_PATH)/boot/dts/)
-	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME)
+	$(LINUX_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME)
 	@if grep -q "CONFIG_MODULES=y" $(@D)/.config; then 	\
-		$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ;	\
+		$(LINUX_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ;	\
 	fi
 	$(LINUX_BUILD_DTB)
 	$(LINUX_APPEND_DTB)
@@ -312,7 +312,7 @@ define LINUX_INSTALL_TARGET_CMDS
 	# Install modules and remove symbolic links pointing to build
 	# directories, not relevant on the target
 	@if grep -q "CONFIG_MODULES=y" $(@D)/.config; then 	\
-		$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) modules_install; \
+		$(LINUX_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) modules_install; \
 		rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/build ;		\
 		rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/source ;	\
 	fi
@@ -321,36 +321,14 @@ endef
 
 include $(sort $(wildcard linux/linux-ext-*.mk))
 
-$(eval $(generic-package))
-
-ifeq ($(BR2_LINUX_KERNEL),y)
-linux-menuconfig linux-xconfig linux-gconfig linux-nconfig: linux-configure
-	$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) \
-		$(subst linux-,,$@)
-	rm -f $(LINUX_DIR)/.stamp_{built,target_installed,images_installed}
-
-linux-savedefconfig: linux-configure
-	$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) \
-		$(subst linux-,,$@)
-
-ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
-linux-update-config: linux-configure $(LINUX_DIR)/.config
-	cp -f $(LINUX_DIR)/.config $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE)
-
-linux-update-defconfig: linux-savedefconfig
-	cp -f $(LINUX_DIR)/defconfig $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE)
-else
-linux-update-config: ;
-linux-update-defconfig: ;
-endif
-endif
+$(eval $(kconfig-package))
 
 # Support for rebuilding the kernel after the cpio archive has
 # been generated in $(BINARIES_DIR)/rootfs.cpio.
 $(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LINUX_DIR)/.stamp_images_installed $(BINARIES_DIR)/rootfs.cpio
 	@$(call MESSAGE,"Rebuilding kernel with initramfs")
 	# Build the kernel.
-	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME)
+	$(LINUX_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME)
 	$(LINUX_APPEND_DTB)
 	# Copy the kernel image to its final destination
 	cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)

package/Config.in

@@ -207,10 +207,12 @@ endif
 	source "package/fb-test-app/Config.in"
 	source "package/fbterm/Config.in"
 	source "package/fbv/Config.in"
+	source "package/freerdp/Config.in"
 	source "package/imagemagick/Config.in"
 	source "package/linux-fusion/Config.in"
 	source "package/lite/Config.in"
 	source "package/mesa3d/Config.in"
+	source "package/mesa3d-headers/Config.in"
 	source "package/ocrad/Config.in"
 	source "package/psplash/Config.in"
 	source "package/sawman/Config.in"
@@ -243,7 +245,6 @@ comment "X applications"
 	source "package/dillo/Config.in"
 	source "package/docker/Config.in"
 	source "package/feh/Config.in"
-	source "package/freerdp/Config.in"
 	source "package/gmpc/Config.in"
 	source "package/gqview/Config.in"
 	source "package/gtkperf/Config.in"
@@ -348,6 +349,7 @@ endif
 	source "package/minicom/Config.in"
 	source "package/nanocom/Config.in"
 	source "package/neard/Config.in"
+	source "package/nvidia-driver/Config.in"
 	source "package/ofono/Config.in"
 	source "package/ola/Config.in"
 	source "package/on2-8170-modules/Config.in"
@@ -391,6 +393,7 @@ endif
 	source "package/usbmount/Config.in"
 	source "package/usbutils/Config.in"
 	source "package/w_scan/Config.in"
+	source "package/wf111/Config.in"
 	source "package/wipe/Config.in"
 	source "package/xorriso/Config.in"
 endmenu
@@ -443,6 +446,7 @@ menu "Lua libraries/modules"
 	source "package/lua-ev/Config.in"
 	source "package/lua-messagepack/Config.in"
 	source "package/lua-msgpack-native/Config.in"
+	source "package/lua-periphery/Config.in"
 	source "package/lua-testmore/Config.in"
 	source "package/luabitop/Config.in"
 	source "package/luacrypto/Config.in"
@@ -510,6 +514,7 @@ menu "external python modules"
 	source "package/python-certifi/Config.in"
 	source "package/python-cffi/Config.in"
 	source "package/python-cheetah/Config.in"
+	source "package/python-cherrypy/Config.in"
 	source "package/python-coherence/Config.in"
 	source "package/python-configobj/Config.in"
 	source "package/python-configshell-fb/Config.in"
@@ -534,6 +539,8 @@ menu "external python modules"
 	source "package/python-json-schema-validator/Config.in"
 	source "package/python-keyring/Config.in"
 	source "package/python-libconfig/Config.in"
+	source "package/python-lxml/Config.in"
+	source "package/python-mako/Config.in"
 	source "package/python-mad/Config.in"
 	source "package/python-markdown/Config.in"
 	source "package/python-markupsafe/Config.in"
@@ -614,6 +621,7 @@ menu "Audio/Sound"
 	source "package/mp4v2/Config.in"
 	source "package/opencore-amr/Config.in"
 	source "package/opus/Config.in"
+	source "package/opusfile/Config.in"
 	source "package/portaudio/Config.in"
 	source "package/speex/Config.in"
 	source "package/taglib/Config.in"
@@ -1042,11 +1050,13 @@ menu "Miscellaneous"
 	source "package/snowball-init/Config.in"
 	source "package/sound-theme-borealis/Config.in"
 	source "package/sound-theme-freedesktop/Config.in"
+	source "package/wine/Config.in"
 endmenu
 
 menu "Networking applications"
 	source "package/aiccu/Config.in"
 	source "package/aircrack-ng/Config.in"
+	source "package/apache/Config.in"
 	source "package/argus/Config.in"
 	source "package/arptables/Config.in"
 	source "package/atftp/Config.in"
@@ -1054,6 +1064,7 @@ menu "Networking applications"
 	source "package/avahi/Config.in"
 	source "package/axel/Config.in"
 	source "package/bandwidthd/Config.in"
+	source "package/batctl/Config.in"
 	source "package/bcusdk/Config.in"
 	source "package/bind/Config.in"
 	source "package/bluez_utils/Config.in"
@@ -1086,6 +1097,7 @@ endif
 	source "package/fping/Config.in"
 	source "package/gesftpserver/Config.in"
 	source "package/gutenprint/Config.in"
+	source "package/hans/Config.in"
 	source "package/hiawatha/Config.in"
 	source "package/hostapd/Config.in"
 	source "package/hplip/Config.in"
@@ -1100,6 +1112,7 @@ endif
 	source "package/igh-ethercat/Config.in"
 	source "package/igmpproxy/Config.in"
 	source "package/inadyn/Config.in"
+	source "package/iodine/Config.in"
 	source "package/iperf/Config.in"
 	source "package/iperf3/Config.in"
 	source "package/iproute2/Config.in"

package/aiccu/Config.in

@@ -4,12 +4,6 @@ config BR2_PACKAGE_AICCU
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_USE_MMU # fork()
-	# Uses dn_skipname(), only available since 0.9.33
-	depends on !BR2_UCLIBC_VERSION_0_9_31
-	# AVR32 only has uClibc 0.9.31, so there's no way it can build
-	# due to the lack of dn_skipname(), even with external
-	# toolchains.
-	depends on !BR2_avr32
 	# Triggers the _gp link issue
 	depends on !BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
 	depends on !BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201405
@@ -31,6 +25,5 @@ config BR2_PACKAGE_AICCU
 comment "aiccu needs a toolchain w/ IPv6, wchar, threads"
 	depends on BR2_USE_MMU
 	depends on !(BR2_INET_IPV6 && BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS)
-	depends on !BR2_avr32
 	depends on !BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
 	depends on !BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201405

package/alsa-lib/0001-avr32-bad-inline.patch

@@ -1,91 +0,0 @@
-diff -urN alsa-lib-1.0.18-0rig//src/pcm/pcm_local.h alsa-lib-1.0.18/src/pcm/pcm_local.h
---- alsa-lib-1.0.18-0rig//src/pcm/pcm_local.h	2009-01-31 11:02:12.000000000 +0100
-+++ alsa-lib-1.0.18/src/pcm/pcm_local.h	2009-01-31 11:03:24.000000000 +0100
-@@ -611,6 +611,13 @@
- 			   snd_pcm_hw_param_t var);
- int _snd_pcm_hw_param_set(snd_pcm_hw_params_t *params,
- 			  snd_pcm_hw_param_t var, unsigned int val, int dir);
-+
-+#if	defined(AVR32_INLINE_BUG)
-+int _snd_pcm_hw_params_set_format(snd_pcm_hw_params_t *params,
-+						snd_pcm_format_t val);
-+int _snd_pcm_hw_params_set_subformat(snd_pcm_hw_params_t *params,
-+				     snd_pcm_subformat_t val);
-+#else
- static inline int _snd_pcm_hw_params_set_format(snd_pcm_hw_params_t *params,
- 						snd_pcm_format_t val)
- {
-@@ -624,7 +631,7 @@
- 	return _snd_pcm_hw_param_set(params, SND_PCM_HW_PARAM_SUBFORMAT,
- 				     (unsigned long) val, 0);
- }
--
-+#endif
- int _snd_pcm_hw_param_set_min(snd_pcm_hw_params_t *params,
- 			      snd_pcm_hw_param_t var, unsigned int val, int dir);
- int _snd_pcm_hw_param_set_max(snd_pcm_hw_params_t *params,
-diff -urN alsa-lib-1.0.18-0rig//src/pcm/pcm_route.c alsa-lib-1.0.18/src/pcm/pcm_route.c
---- alsa-lib-1.0.18-0rig//src/pcm/pcm_route.c	2009-01-31 11:02:12.000000000 +0100
-+++ alsa-lib-1.0.18/src/pcm/pcm_route.c	2009-01-31 11:03:18.000000000 +0100
-@@ -26,6 +26,7 @@
-  *
-  */
-   
-+
- #include <byteswap.h>
- #include <math.h>
- #include "pcm_local.h"
-@@ -106,6 +107,23 @@
- 
- #endif /* DOC_HIDDEN */
- 
-+
-+#if	defined(AVR32_INLINE_BUG)
-+int _snd_pcm_hw_params_set_format(snd_pcm_hw_params_t *params,
-+						snd_pcm_format_t val)
-+{
-+	return _snd_pcm_hw_param_set(params, SND_PCM_HW_PARAM_FORMAT,
-+				     (unsigned long) val, 0);
-+}
-+
-+int _snd_pcm_hw_params_set_subformat(snd_pcm_hw_params_t *params,
-+				     snd_pcm_subformat_t val)
-+{
-+	return _snd_pcm_hw_param_set(params, SND_PCM_HW_PARAM_SUBFORMAT,
-+				     (unsigned long) val, 0);
-+}
-+#endif
-+
- static void snd_pcm_route_convert1_zero(const snd_pcm_channel_area_t *dst_area,
- 					snd_pcm_uframes_t dst_offset,
- 					const snd_pcm_channel_area_t *src_areas ATTRIBUTE_UNUSED,
-@@ -483,6 +501,8 @@
- 				  snd_pcm_uframes_t frames,
- 				  snd_pcm_route_params_t *params)
- {
-+#if	defined(AVR32_INLINE_BUG)
-+#endif
- 	unsigned int dst_channel;
- 	snd_pcm_route_ttable_dst_t *dstp;
- 	const snd_pcm_channel_area_t *dst_area;
-@@ -551,8 +571,20 @@
- 	_snd_pcm_hw_param_set_mask(sparams, SND_PCM_HW_PARAM_ACCESS,
- 				   &saccess_mask);
- 	if (route->sformat != SND_PCM_FORMAT_UNKNOWN) {
-+#if	defined(AVR32_INLINE_BUG)
-+/* Start of  of problem */
-+#endif
- 		_snd_pcm_hw_params_set_format(sparams, route->sformat);
- 		_snd_pcm_hw_params_set_subformat(sparams, SND_PCM_SUBFORMAT_STD);
-+#if	0
-+		_snd_pcm_hw_param_set(sparams, SND_PCM_HW_PARAM_FORMAT,
-+				     (unsigned long) route->sformat, 0);
-+		_snd_pcm_hw_param_set(sparams, SND_PCM_HW_PARAM_SUBFORMAT,
-+				     (unsigned long) SND_PCM_SUBFORMAT_STD, 0);
-+#endif
-+#if	defined(AVR32_INLINE_BUG)
-+/* End of problem */
-+#endif
- 	}
- 	if (route->schannels >= 0) {
- 		_snd_pcm_hw_param_set(sparams, SND_PCM_HW_PARAM_CHANNELS,

package/alsa-lib/alsa-lib.mk

@@ -50,10 +50,6 @@ ifneq ($(BR2_PACKAGE_ALSA_LIB_OLD_SYMBOLS),y)
 ALSA_LIB_CONF_OPTS += --disable-old-symbols
 endif
 
-ifeq ($(BR2_avr32),y)
-ALSA_LIB_CFLAGS += -DAVR32_INLINE_BUG
-endif
-
 ifeq ($(BR2_PACKAGE_ALSA_LIB_PYTHON),y)
 ALSA_LIB_CONF_OPTS += \
 	--with-pythonlibs=-lpython$(PYTHON_VERSION_MAJOR) \

package/apache/0001-cross-compile.patch

@@ -0,0 +1,63 @@
+Fix cross-compilation
+
+Fetched httpd-2.4.x-cross_compile.diff from upstream bugtracker:
+https://issues.apache.org/bugzilla/show_bug.cgi?id=51257#c6
+
+which is a bundle of upstream revisions:
+    http://svn.apache.org/viewvc?view=revision&revision=1327907
+    http://svn.apache.org/viewvc?view=revision&revision=1328390
+    http://svn.apache.org/viewvc?view=revision&revision=1328714
+
+Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
+
+Index: server/Makefile.in
+===================================================================
+--- a/server/Makefile.in	(revision 1328714)
++++ b/server/Makefile.in	(working copy)
+@@ -22,9 +22,14 @@
+ include $(top_builddir)/build/rules.mk
+ include $(top_srcdir)/build/library.mk
+ 
++ifdef CC_FOR_BUILD
++gen_test_char: gen_test_char.c
++	$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) -DCROSS_COMPILE -o $@ $<
++else
+ gen_test_char_OBJECTS = gen_test_char.lo
+ gen_test_char: $(gen_test_char_OBJECTS)
+ 	$(LINK) $(EXTRA_LDFLAGS) $(gen_test_char_OBJECTS) $(EXTRA_LIBS)
++endif
+ 
+ test_char.h: gen_test_char
+ 	./gen_test_char > test_char.h
+Index: configure.in
+===================================================================
+--- a/configure.in	(revision 1328714)
++++ b/configure.in	(working copy)
+@@ -193,6 +193,14 @@
+ dnl Try to get c99 support for variadic macros
+ ifdef([AC_PROG_CC_C99], [AC_PROG_CC_C99])
+ 
++dnl In case of cross compilation we set CC_FOR_BUILD to cc unless
++dnl we got already CC_FOR_BUILD from environment.
++if test "x${build_alias}" != "x${host_alias}"; then
++  if test "x${CC_FOR_BUILD}" = "x"; then
++    CC_FOR_BUILD=cc
++  fi
++fi
++
+ if test "x${cache_file}" = "x/dev/null"; then
+   # Likewise, ensure that CC and CPP are passed through to the pcre
+   # configure script iff caching is disabled (the autoconf 2.5x default).
+Index: acinclude.m4
+===================================================================
+--- a/acinclude.m4	(revision 1328714)
++++ ab/cinclude.m4	(working copy)
+@@ -53,6 +53,8 @@
+   APACHE_SUBST(CPPFLAGS)
+   APACHE_SUBST(CFLAGS)
+   APACHE_SUBST(CXXFLAGS)
++  APACHE_SUBST(CC_FOR_BUILD)
++  APACHE_SUBST(CFLAGS_FOR_BUILD)
+   APACHE_SUBST(LTFLAGS)
+   APACHE_SUBST(LDFLAGS)
+   APACHE_SUBST(LT_LDFLAGS)

package/apache/Config.in

@@ -0,0 +1,19 @@
+config BR2_PACKAGE_APACHE
+	bool "apache"
+	select BR2_PACKAGE_APR_UTIL
+	select BR2_PACKAGE_PCRE
+	depends on !BR2_STATIC_LIBS
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	depends on BR2_USE_MMU # apr
+	help
+	  The Apache HTTP Server Project is an effort to develop and maintain an
+	  open-source HTTP server for modern operating systems including UNIX
+	  and Windows NT. The goal of this project is to provide a secure,
+	  efficient and extensible server that provides HTTP services in sync
+	  with the current HTTP standards.
+
+	  http://httpd.apache.org
+
+comment "apache needs a toolchain w/ dynamic library, threads"
+	depends on BR2_USE_MMU
+	depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS

package/apache/apache.hash

@@ -0,0 +1,2 @@
+# From http://www.apache.org/dist/httpd/httpd-2.4.12.tar.bz2.sha1
+sha1	bc4681bfd63accec8d82d3cc440fbc8264ce0f17	httpd-2.4.12.tar.bz2

package/apache/apache.mk

@@ -0,0 +1,85 @@
+################################################################################
+#
+# apache
+#
+################################################################################
+
+APACHE_VERSION = 2.4.12
+APACHE_SOURCE = httpd-$(APACHE_VERSION).tar.bz2
+APACHE_SITE = http://archive.apache.org/dist/httpd
+APACHE_LICENSE = Apache-2.0
+APACHE_LICENSE_FILES = LICENSE
+# Needed for mod_php
+APACHE_INSTALL_STAGING = YES
+# We have a patch touching configure.in and Makefile.in,
+# so we need to autoreconf:
+APACHE_AUTORECONF = YES
+APACHE_DEPENDENCIES = apr apr-util pcre
+
+APACHE_CONF_ENV= \
+	ap_cv_void_ptr_lt_long=no \
+	PCRE_CONFIG=$(STAGING_DIR)/usr/bin/pcre-config
+
+APACHE_CONF_OPTS = \
+	--sysconfdir=/etc/apache2 \
+	--with-apr=$(STAGING_DIR)/usr \
+	--with-apr-util=$(STAGING_DIR)/usr \
+	--with-pcre=$(STAGING_DIR)/usr/bin/pcre-config \
+	--enable-http \
+	--enable-dbd \
+	--enable-proxy \
+	--enable-mime-magic \
+	--without-suexec-bin \
+	--enable-mods-shared=all \
+	--with-mpm=worker \
+	--disable-lua \
+	--disable-luajit
+
+ifeq ($(BR2_ARCH_HAS_ATOMICS),y)
+APACHE_CONF_OPTS += --enable-nonportable-atomics=yes
+endif
+
+ifeq ($(BR2_PACKAGE_LIBXML2),y)
+APACHE_DEPENDENCIES += libxml2
+# Apache wants the path to the header file, where it can find
+# <libxml/parser.h>.
+APACHE_CONF_OPTS += \
+	--enable-xml2enc \
+	--enable-proxy-html \
+	--with-libxml2=$(STAGING_DIR)/usr/include/libxml2
+else
+APACHE_CONF_OPTS += \
+	--disable-xml2enc \
+	--disable-proxy-html
+endif
+
+ifeq ($(BR2_PACKAGE_OPENSSL),y)
+APACHE_DEPENDENCIES += openssl
+APACHE_CONF_OPTS += \
+	--enable-ssl \
+	--with-ssl=$(STAGING_DIR)/usr
+else
+APACHE_CONF_OPTS += --disable-ssl
+endif
+
+ifeq ($(BR2_PACKAGE_ZLIB),y)
+APACHE_DEPENDENCIES += zlib
+APACHE_CONF_OPTS += \
+	--enable-deflate \
+	--with-z=$(STAGING_DIR)/usr
+else
+APACHE_CONF_OPTS += --disable-deflate
+endif
+
+define APACHE_FIX_STAGING_APACHE_CONFIG
+	$(SED) 's%/usr/build%$(STAGING_DIR)/usr/build%' $(STAGING_DIR)/usr/bin/apxs
+	$(SED) 's%^prefix =.*%prefix = $(STAGING_DIR)/usr%' $(STAGING_DIR)/usr/build/config_vars.mk
+endef
+APACHE_POST_INSTALL_STAGING_HOOKS += APACHE_FIX_STAGING_APACHE_CONFIG
+
+define APACHE_CLEANUP_TARGET
+	$(RM) -rf $(TARGET_DIR)/usr/manual $(TARGET_DIR)/usr/build
+endef
+APACHE_POST_INSTALL_TARGET_HOOKS += APACHE_CLEANUP_TARGET
+
+$(eval $(autotools-package))

package/autoconf-archive/autoconf-archive.mk

@@ -0,0 +1,13 @@
+################################################################################
+#
+# autoconf-archive
+#
+################################################################################
+
+AUTOCONF_ARCHIVE_VERSION = 2015.02.04
+AUTOCONF_ARCHIVE_SOURCE = autoconf-archive-$(AUTOCONF_ARCHIVE_VERSION).tar.xz
+AUTOCONF_ARCHIVE_SITE = $(BR2_GNU_MIRROR)/autoconf-archive/
+AUTOCONF_ARCHIVE_LICENSE = GPLv3+ with exception
+AUTOCONF_ARCHIVE_LICENSE_FILES = COPYING COPYING.EXCEPTION
+
+$(eval $(host-autotools-package))

package/autossh/autossh.hash

@@ -1,4 +1,2 @@
-# From http://www.harding.motd.ca/autossh/autossh-1.4d.cksums
-md5	89c09b50aa2d57814f808d727e937d0f	autossh-1.4d.tgz
-sha1	27da23c357f8d263aba6ecf3e8792a3552d90e50	autossh-1.4d.tgz
-sha256	00008fe458bde4c94e98bfa96e1e6e18c4107a1f9fc8a538556b82e91ddedc16	autossh-1.4d.tgz
+# From http://www.harding.motd.ca/autossh/autossh-1.4e.cksums
+sha256	9e8e10a59d7619176f4b986e256f776097a364d1be012781ea52e08d04679156	autossh-1.4e.tgz

package/autossh/autossh.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-AUTOSSH_VERSION = 1.4d
+AUTOSSH_VERSION = 1.4e
 AUTOSSH_SITE = http://www.harding.motd.ca/autossh
 AUTOSSH_SOURCE = autossh-$(AUTOSSH_VERSION).tgz
 AUTOSSH_LICENSE = Modified BSD

package/avrdude/Config.in

@@ -8,7 +8,6 @@ config BR2_PACKAGE_AVRDUDE
 	depends on BR2_LARGEFILE # elfutils
 	depends on BR2_USE_WCHAR # elfutils
 	depends on !BR2_STATIC_LIBS # elfutils
-	depends on !BR2_avr32 # elfutils
 	depends on !BR2_bfin # elfutils
 	help
 	  avrdude is a programmer for Atmel AVR microcontrollers
@@ -18,5 +17,4 @@ config BR2_PACKAGE_AVRDUDE
 
 comment "avrdude needs a toolchain w/ threads, largefile, wchar, dynamic library"
 	depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_LARGEFILE || !BR2_USE_WCHAR || BR2_STATIC_LIBS
-	depends on !BR2_avr32
 	depends on !BR2_bfin

package/batctl/Config.in

@@ -0,0 +1,12 @@
+config BR2_PACKAGE_BATCTL
+	bool "batctl"
+	depends on BR2_INET_IPV6
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libnl
+	select BR2_PACKAGE_LIBNL
+	help
+	  Batctl is the configuration and debugging tool for batman-adv.
+
+	  http://www.open-mesh.org/projects/batman-adv/wiki/Using-batctl
+
+comment "batctl needs a toolchain w/ IPv6, threads"
+	depends on !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS

package/batctl/batctl.hash

@@ -0,0 +1,2 @@
+# Locally calculated
+sha256	77509ed70232ebc0b73e2fa9471ae13b12d6547d167dda0a82f7a7fad7252c36  batctl-2014.4.0.tar.gz

package/batctl/batctl.mk

@@ -0,0 +1,21 @@
+################################################################################
+#
+# batctl
+#
+################################################################################
+
+BATCTL_VERSION = 2014.4.0
+BATCTL_SITE = http://downloads.open-mesh.org/batman/releases/batman-adv-$(BATCTL_VERSION)
+BATCTL_LICENSE = GPLv2
+BATCTL_DEPENDENCIES = libnl host-pkgconf
+
+define BATCTL_BUILD_CMDS
+	$(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) all
+endef
+
+define BATCTL_INSTALL_TARGET_CMDS
+	$(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) \
+		PREFIX=/usr DESTDIR=$(TARGET_DIR) install
+endef
+
+$(eval $(generic-package))

package/bdwgc/Config.in

@@ -1,13 +1,5 @@
-config BR2_PACKAGE_BDWGC_ARCH_SUPPORTS
-	bool
-	default y
-	depends on BR2_arm || BR2_armeb || BR2_avr32 || BR2_i386 \
-		|| BR2_mips || BR2_mipsel || BR2_powerpc || BR2_sh \
-		|| BR2_sparc || BR2_x86_64
-
 config BR2_PACKAGE_BDWGC
 	bool "bdwgc"
-	depends on BR2_PACKAGE_BDWGC_ARCH_SUPPORTS
 	depends on BR2_PACKAGE_LIBATOMIC_ARCH_SUPPORTS
 	select BR2_PACKAGE_LIBATOMIC_OPS
 	help

package/bdwgc/bdwgc.hash

@@ -0,0 +1,2 @@
+# Locally computed
+sha256	63320ad7c45460e4a40e03f5aa4c6893783f21a16416c3282b994f933312afa2	gc-7.4.2.tar.gz

package/bdwgc/bdwgc.mk

@@ -4,9 +4,7 @@
 #
 ################################################################################
 
-# When bumping the version number, check if the list of supported architectures
-# is still valid; see Config.log.
-BDWGC_VERSION = 7.2f
+BDWGC_VERSION = 7.4.2
 BDWGC_SOURCE = gc-$(BDWGC_VERSION).tar.gz
 BDWGC_SITE = http://www.hboehm.info/gc/gc_source
 BDWGC_INSTALL_STAGING = YES

package/binutils/Config.in.host

@@ -7,33 +7,31 @@ choice
 	help
 	  Select the version of binutils you wish to use.
 
-	config BR2_BINUTILS_VERSION_2_18_AVR32_1_0_1
-		depends on BR2_avr32
-		bool "binutils 2.18-avr32-1.0.1"
-
 	config BR2_BINUTILS_VERSION_2_22
-		depends on !BR2_avr32 && !BR2_aarch64 && !BR2_microblaze && !BR2_powerpc64le
+		depends on !BR2_aarch64 && !BR2_microblaze && \
+			   !BR2_powerpc64le && !BR2_nios2
 		bool "binutils 2.22"
 
 	# bfin disabled for newer binutils due to
 	# https://sourceware.org/bugzilla/show_bug.cgi?id=17334
 	config BR2_BINUTILS_VERSION_2_23_2
-		depends on !BR2_avr32 && !BR2_aarch64 && !BR2_bfin && !BR2_microblaze && !BR2_powerpc64le
+		depends on !BR2_aarch64 && !BR2_bfin && !BR2_microblaze && \
+			   !BR2_powerpc64le && !BR2_nios2
 		bool "binutils 2.23.2"
 
 	config BR2_BINUTILS_VERSION_2_24
-		depends on !BR2_avr32 && !BR2_bfin
+		depends on !BR2_bfin
+		depends on !BR2_nios2 # supported, but broken on Nios-II
 		bool "binutils 2.24"
 
 	config BR2_BINUTILS_VERSION_2_25
-		depends on !BR2_avr32 && !BR2_bfin
+		depends on !BR2_bfin
 		bool "binutils 2.25"
 
 endchoice
 
 config BR2_BINUTILS_VERSION
 	string
-	default "2.18-avr32-1.0.1" if BR2_BINUTILS_VERSION_2_18_AVR32_1_0_1
 	default "arc-2014.12"	if BR2_arc
 	default "2.22"		if BR2_BINUTILS_VERSION_2_22
 	default "2.23.2"	if BR2_BINUTILS_VERSION_2_23_2

package/binutils/binutils.mk

@@ -8,17 +8,9 @@
 # If not, we do like other packages
 BINUTILS_VERSION = $(call qstrip,$(BR2_BINUTILS_VERSION))
 ifeq ($(BINUTILS_VERSION),)
-ifeq ($(BR2_avr32),y)
-# avr32 uses a special version
-BINUTILS_VERSION = 2.18-avr32-1.0.1
-else
 BINUTILS_VERSION = 2.22
 endif
-endif
 
-ifeq ($(ARCH),avr32)
-BINUTILS_SITE = ftp://www.at91.com/pub/buildroot
-endif
 ifeq ($(BR2_arc),y)
 BINUTILS_SITE = $(call github,foss-for-synopsys-dwc-arc-processors,binutils-gdb,$(BINUTILS_VERSION))
 BINUTILS_SOURCE = binutils-$(BINUTILS_VERSION).tar.gz

package/blktrace/Config.in

@@ -4,7 +4,7 @@ config BR2_PACKAGE_BLKTRACE
 	depends on BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_MUSL
 	# Because of libaio arch depends
 	depends on \
-		BR2_arm   || BR2_armeb || BR2_avr32  || BR2_i386    || \
+		BR2_arm   || BR2_armeb || BR2_i386   || \
 		BR2_m68k  || BR2_mips  || BR2_mipsel || BR2_powerpc || \
 		BR2_sparc || BR2_x86_64
 	select BR2_PACKAGE_LIBAIO

package/bluez5_utils/Config.in

@@ -1,6 +1,5 @@
 config BR2_PACKAGE_BLUEZ5_UTILS
 	bool "bluez-utils 5.x"
-	depends on !BR2_avr32
 	depends on BR2_USE_WCHAR # libglib2
 	depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2
 	depends on BR2_USE_MMU # dbus

package/bluez_utils/Config.in

@@ -1,6 +1,5 @@
 config BR2_PACKAGE_BLUEZ_UTILS
 	bool "bluez-utils"
-	depends on !BR2_avr32
 	depends on !BR2_STATIC_LIBS
 	depends on BR2_USE_WCHAR # libglib2
 	depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib, libglib2
@@ -47,5 +46,5 @@ config BR2_PACKAGE_BLUEZ_UTILS_GATT
 endif
 
 comment "bluez-utils needs a toolchain w/ wchar, threads, dynamic library"
-	depends on !BR2_avr32 && BR2_USE_MMU
+	depends on BR2_USE_MMU
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS

package/bmon/0001-build-uclinux-is-also-linux.patch

@@ -1,25 +0,0 @@
-From adcf320db5cc2844209d001f9484b0ff0cab4e0b Mon Sep 17 00:00:00 2001
-From: Gustavo Zacarias <gustavo@zacarias.com.ar>
-Date: Tue, 11 Nov 2014 20:22:37 -0300
-Subject: [PATCH] build: uclinux is also linux
-
-Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
----
-Status: pull request in github
-
-diff --git a/configure.ac b/configure.ac
-index 3059e52..10388fd 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -70,7 +70,7 @@ fi
- PKG_CHECK_MODULES([CONFUSE], [libconfuse], [], AC_MSG_ERROR([requires libconfuse]))
- 
- case ${target_os} in
--    linux*)
-+    linux*|uclinux*)
-         PKG_CHECK_MODULES([LIBNL], [libnl-3.0], [], AC_MSG_ERROR([requires libnl3-dev]))
-         PKG_CHECK_MODULES([LIBNL_ROUTE], [libnl-route-3.0], [], AC_MSG_ERROR([requires libnl3-route]))
-     ;;
--- 
-2.0.4
-

package/bmon/bmon.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  78ab9e46840178fbc874cdbc94fde34e72e41a18a27383660b50b4c3cd0d1f9c  bmon-3.5.tar.gz
+sha256  62c8c20d00572a7670891d4c112924786cb69ec4ca92d5052951566f000d1514  bmon-3.6.tar.gz

package/bmon/bmon.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-BMON_VERSION = 3.5
+BMON_VERSION = 3.6
 BMON_SITE = https://github.com/tgraf/bmon/releases/download/v$(BMON_VERSION)/
 BMON_DEPENDENCIES = host-pkgconf libconfuse libnl ncurses
 BMON_LICENSE = BSD-2c

package/btrfs-progs/Config.in

@@ -4,7 +4,6 @@ config BR2_PACKAGE_BTRFS_PROGS
 	depends on BR2_USE_WCHAR # util-linux
 	depends on BR2_USE_MMU # util-linux
 	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on !BR2_avr32 # toolchain issues
 	select BR2_PACKAGE_ACL
 	select BR2_PACKAGE_ATTR
 	select BR2_PACKAGE_E2FSPROGS
@@ -20,6 +19,5 @@ config BR2_PACKAGE_BTRFS_PROGS
 
 comment "btrfs-progs needs a toolchain w/ largefile, wchar, threads"
 	depends on BR2_USE_MMU
-	depends on !BR2_avr32
 	depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || \
 		!BR2_TOOLCHAIN_HAS_THREADS

package/busybox/busybox.config

@@ -575,7 +575,7 @@ CONFIG_FEATURE_FDISK_WRITABLE=y
 CONFIG_FEATURE_GPT_LABEL=y
 CONFIG_FEATURE_FDISK_ADVANCED=y
 # CONFIG_FINDFS is not set
-# CONFIG_FLOCK is not set
+CONFIG_FLOCK=y
 CONFIG_FREERAMDISK=y
 # CONFIG_FSCK_MINIX is not set
 # CONFIG_MKFS_EXT2 is not set

package/cmake/cmake.hash

@@ -0,0 +1,2 @@
+# Locally calculated
+sha256 45f4d3fa8a2f61cc092ae461aac4cac1bab4ac6706f98274ea7f314dd315c6d0 cmake-3.1.3.tar.gz

package/cmake/cmake.mk

@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-CMAKE_VERSION_MAJOR = 3.0
-CMAKE_VERSION = $(CMAKE_VERSION_MAJOR).2
+CMAKE_VERSION_MAJOR = 3.1
+CMAKE_VERSION = $(CMAKE_VERSION_MAJOR).3
 CMAKE_SITE = http://www.cmake.org/files/v$(CMAKE_VERSION_MAJOR)
 CMAKE_LICENSE = BSD-3c
 CMAKE_LICENSE_FILES = Copyright.txt

package/collectd/Config.in

@@ -251,7 +251,6 @@ config BR2_PACKAGE_COLLECTD_MYSQL
 	depends on BR2_INSTALL_LIBSTDCPP # mysql
 	depends on BR2_USE_MMU # mysql
 	depends on BR2_TOOLCHAIN_HAS_THREADS # mysql
-	depends on !BR2_avr32 # mysql
 	select BR2_PACKAGE_MYSQL
 	help
 	  Connects to a MySQL database and issues a "show status" command.

package/connman/Config.in

@@ -3,7 +3,6 @@ config BR2_PACKAGE_CONNMAN
 	select BR2_PACKAGE_DBUS
 	select BR2_PACKAGE_LIBGLIB2
 	select BR2_PACKAGE_IPTABLES
-	depends on !BR2_avr32 # no inotify_init1
 	depends on BR2_USE_WCHAR # libglib2
 	depends on BR2_INET_IPV6
 	depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2
@@ -66,5 +65,5 @@ config BR2_PACKAGE_CONNMAN_CLIENT
 endif # BR2_PACKAGE_CONNMAN
 
 comment "connman needs a toolchain w/ IPv6, wchar, threads, resolver, dynamic library"
-	depends on BR2_USE_MMU && !BR2_avr32
+	depends on BR2_USE_MMU
 	depends on !BR2_USE_WCHAR || !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS

package/crda/0002-Add-DESTDIR-support-in-install-libreg-rules.patch

@@ -1,41 +0,0 @@
-From 2cabb2588da56735369131b709f191453c080be0 Mon Sep 17 00:00:00 2001
-From: "John W. Linville" <linville@tuxdriver.com>
-Date: Fri, 14 Feb 2014 13:58:44 -0500
-Subject: [PATCH 1/4] crda: Add DESTDIR support in install-libreg* rules in
- Makefile
-
-Also drop ldconfig call, as that causes problems when cross compiling /
-installing as non-root.
-
-Signed-off-by: John W. Linville <linville@tuxdriver.com>
-Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
-Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
----
- Makefile | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/Makefile b/Makefile
-index 0b2f0d7..1f25509 100644
---- a/Makefile
-+++ b/Makefile
-@@ -120,13 +120,12 @@ $(LIBREG): regdb.h reglib.h reglib.c
- 
- install-libreg-headers:
- 	$(NQ) '  INSTALL  libreg-headers'
--	$(Q)mkdir -p $(INCLUDE_DIR)
--	$(Q)cp *.h $(INCLUDE_DIR)/
-+	$(Q)mkdir -p $(DESTDIR)/$(INCLUDE_DIR)
-+	$(Q)cp *.h $(DESTDIR)/$(INCLUDE_DIR)/
- 
- install-libreg:
- 	$(NQ) '  INSTALL  libreg'
--	$(Q)mkdir -p $(LIBDIR)
--	$(Q)cp $(LIBREG) $(LIBDIR)/
--	$(Q)ldconfig
-+	$(Q)mkdir -p $(DESTDIR)/$(LIBDIR)
-+	$(Q)cp $(LIBREG) $(DESTDIR)/$(LIBDIR)/
- 
- %.o: %.c regdb.h $(LIBREG)
--- 
-1.8.5.5
-

package/crda/0002-drop-ldconfig-call.patch

@@ -0,0 +1,15 @@
+Drop ldconfig call, it's useless for cross-compiling.
+
+Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
+
+diff -Nura crda-3.18.orig/Makefile crda-3.18/Makefile
+--- crda-3.18.orig/Makefile	2015-02-18 10:34:23.841259401 -0300
++++ crda-3.18/Makefile	2015-02-18 10:35:10.524201452 -0300
+@@ -127,7 +127,6 @@
+ 	$(NQ) '  INSTALL  libreg'
+ 	$(Q)mkdir -p $(DESTDIR)/$(LIBDIR)
+ 	$(Q)cp $(LIBREG) $(DESTDIR)/$(LIBDIR)/
+-	$(Q)ldconfig
+ 
+ %.o: %.c regdb.h $(LIBREG)
+ 	$(NQ) '  CC  ' $@

package/crda/crda.hash

@@ -1,2 +1,2 @@
 # From https://www.kernel.org/pub/software/network/crda/sha256sums.asc
-sha256	2f85da7ab0170b140d6ed62596c8f268d4a7dedecf84cac7182ada979742ff59	crda-3.13.tar.xz
+sha256	43fcb9679f8b75ed87ad10944a506292def13e4afb194afa7aa921b01e8ecdbf	crda-3.18.tar.xz

package/crda/crda.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-CRDA_VERSION = 3.13
+CRDA_VERSION = 3.18
 CRDA_SOURCE = crda-$(CRDA_VERSION).tar.xz
 CRDA_SITE = $(BR2_KERNEL_MIRROR)/software/network/crda
 CRDA_DEPENDENCIES = host-pkgconf host-python-m2crypto \

package/cryptodev-linux/0001-Replace_INIT_COMPLETION_with_reinit_completion.patch

@@ -1,83 +0,0 @@
-From: Cosmin Paraschiv <cosmin.paraschiv@freescale.com>
-To: <cryptodev-linux-devel@gna.org>
-Subject: [Cryptodev-linux-devel] [PATCH v2] Replace INIT_COMPLETION with
-	reinit_completion.
-
-In the 3.13-rc1 Linux kernel, the INIT_COMPLETION macro has been replaced
-with an inline function, reinit_completion [1][2]. We are currently
-using the 3.13-rc3 Linux kernel, which leads to the following error:
-
-cryptlib.c:279:2: error: implicit declaration of function 'INIT_COMPLETION' [-Werror=implicit-function-declaration]
-  INIT_COMPLETION(cdata->async.result->completion);
-
-[1] https://github.com/torvalds/linux/commit/c32f74ab2872994bc8336ed367313da3139350ca
-[2] https://github.com/torvalds/linux/commit/62026aedaacedbe1ffe94a3599ad4acd8ecdf587
-
-Signed-off-by: Cosmin Paraschiv <cosmin.paraschiv@freescale.com>
-Reviewed-by: Cristian Stoica <cristian.stoica@freescale.com>
-Tested-by: Cristian Stoica <cristian.stoica@freescale.com>
-Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
----
- cryptlib.c      | 8 ++++----
- cryptodev_int.h | 6 ++++++
- 2 files changed, 10 insertions(+), 4 deletions(-)
-
-diff --git a/cryptlib.c b/cryptlib.c
-index e6c91fc..fe25563 100644
---- a/cryptlib.c
-+++ b/cryptlib.c
-@@ -276,7 +276,7 @@ ssize_t cryptodev_cipher_encrypt(struct cipher_data *cdata,
- {
- 	int ret;
- 
--	INIT_COMPLETION(cdata->async.result->completion);
-+	reinit_completion(&cdata->async.result->completion);
- 
- 	if (cdata->aead == 0) {
- 		ablkcipher_request_set_crypt(cdata->async.request,
-@@ -299,7 +299,7 @@ ssize_t cryptodev_cipher_decrypt(struct cipher_data *cdata,
- {
- 	int ret;
- 
--	INIT_COMPLETION(cdata->async.result->completion);
-+	reinit_completion(&cdata->async.result->completion);
- 	if (cdata->aead == 0) {
- 		ablkcipher_request_set_crypt(cdata->async.request,
- 			(struct scatterlist *)src, dst,
-@@ -410,7 +410,7 @@ ssize_t cryptodev_hash_update(struct hash_data *hdata,
- {
- 	int ret;
- 
--	INIT_COMPLETION(hdata->async.result->completion);
-+	reinit_completion(&hdata->async.result->completion);
- 	ahash_request_set_crypt(hdata->async.request, sg, NULL, len);
- 
- 	ret = crypto_ahash_update(hdata->async.request);
-@@ -422,7 +422,7 @@ int cryptodev_hash_final(struct hash_data *hdata, void* output)
- {
- 	int ret;
- 
--	INIT_COMPLETION(hdata->async.result->completion);
-+	reinit_completion(&hdata->async.result->completion);
- 	ahash_request_set_crypt(hdata->async.request, NULL, output, 0);
- 
- 	ret = crypto_ahash_final(hdata->async.request);
-diff --git a/cryptodev_int.h b/cryptodev_int.h
-index eb2aabf..3834ef1 100644
---- a/cryptodev_int.h
-+++ b/cryptodev_int.h
-@@ -2,6 +2,12 @@
- #ifndef CRYPTODEV_INT_H
- # define CRYPTODEV_INT_H
- 
-+#include <linux/version.h>
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 13, 0))
-+#  define reinit_completion(x) INIT_COMPLETION(*(x))
-+#endif
-+
- #include <linux/init.h>
- #include <linux/sched.h>
- #include <linux/fs.h>
--- 
-1.8.3.1

package/cryptodev-linux/0001-fix-compilation-against-linux-3.19.patch

@@ -0,0 +1,37 @@
+From 5054d20d45571cc85339351fde52f872eeb82206 Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 10 Feb 2015 04:57:05 +0100
+Subject: [PATCH] fix compilation against linux-3.19
+
+Commit f938612dd97d481b8b5bf960c992ae577f081c17 in linux.git removes
+get_unused_fd() macro. This patch changes the calling code to use it's
+content 'get_unused_fd_flags(0)' instead. Checking for when
+get_unused_fd_flags was introduced shows it's been there since 2.6.23 at
+least, so probably no need to make this change conditional on the target
+kernel version.
+
+Original patch by Ricardo Ribalda Delgado for Open Embedded, reported by
+Oleg Rakhmanov.
+
+Signed-off-by: Phil Sutter <phil@nwl.cc>
+Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
+---
+ ioctl.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/ioctl.c b/ioctl.c
+index 5a55a76..b23f5fd 100644
+--- a/ioctl.c
++++ b/ioctl.c
+@@ -546,7 +546,7 @@ static int
+ clonefd(struct file *filp)
+ {
+ 	int ret;
+-	ret = get_unused_fd();
++	ret = get_unused_fd_flags(0);
+ 	if (ret >= 0) {
+ 			get_file(filp);
+ 			fd_install(ret, filp);
+-- 
+2.0.5
+

package/cryptodev-linux/cryptodev-linux.hash

@@ -0,0 +1,2 @@
+# Locally calculated after checking php signature
+sha256	41880533b53de4d7b3f054e230f576988dafb8eed7bef5ebcf6422bb2e3a3b25	cryptodev-linux-1.7.tar.gz

package/cryptodev-linux/cryptodev-linux.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-CRYPTODEV_LINUX_VERSION = 1.6
+CRYPTODEV_LINUX_VERSION = 1.7
 CRYPTODEV_LINUX_SITE = http://download.gna.org/cryptodev-linux
 CRYPTODEV_LINUX_DEPENDENCIES = linux
 CRYPTODEV_LINUX_INSTALL_STAGING = YES

package/cwiid/Config.in

@@ -1,6 +1,5 @@
 config BR2_PACKAGE_CWIID
 	bool "cwiid"
-	depends on !BR2_avr32 # bluez_utils
 	depends on !BR2_STATIC_LIBS # bluez_utils
 	depends on BR2_USE_WCHAR # bluez_utils -> libglib2
 	depends on BR2_TOOLCHAIN_HAS_THREADS # bluez_utils -> dbus, alsa-lib, libglib2
@@ -27,5 +26,4 @@ endif
 
 comment "cwiid needs a toolchain w/ dynamic lib, threads, wchar"
 	depends on BR2_STATIC_LIBS || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
-	depends on !BR2_avr32
 	depends on !BR2_USE_MMU

package/dialog/Config.in

@@ -1,6 +1,5 @@
 config BR2_PACKAGE_DIALOG
 	bool "dialog"
-	depends on BR2_TOOLCHAIN_HAS_THREADS # fork()
 	depends on BR2_USE_MMU # fork()
 	select BR2_PACKAGE_NCURSES
 	select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
@@ -12,7 +11,3 @@ config BR2_PACKAGE_DIALOG
 	  of a script to interact with the user in a much friendlier manner.
 
 	  http://invisible-island.net/dialog/dialog.html
-
-comment "dialog needs a toolchain w/ threads"
-	depends on !BR2_TOOLCHAIN_HAS_THREADS
-	depends on BR2_USE_MMU

package/dialog/dialog.hash

@@ -1,2 +1,2 @@
 # Locally calculated after checking pgp signature
-sha256	d054766fba3dac828851f1c9852e5992eb824fd0a0dd26d87ee517242027bafc	dialog-1.2-20140911.tgz
+sha256	1d98ec7cc81f11f9019fa0b90f1afdaa86579cae1ce8869a6fd61deb9d4b887a	dialog-1.2-20150125.tgz

package/dialog/dialog.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-DIALOG_VERSION = 1.2-20140911
+DIALOG_VERSION = 1.2-20150125
 DIALOG_SOURCE = dialog-$(DIALOG_VERSION).tgz
 DIALOG_SITE = ftp://invisible-island.net/dialog
 DIALOG_CONF_OPTS = --with-ncurses --with-curses-dir=$(STAGING_DIR)/usr \

package/dmraid/dmraid.mk

@@ -11,7 +11,6 @@ DMRAID_SUBDIR = $(DMRAID_VERSION)/dmraid
 # lib and tools race with parallel make
 DMRAID_MAKE = $(MAKE1)
 DMRAID_INSTALL_STAGING = YES
-DMRAID_INSTALL_TARGET_OPTS = DESTDIR=$(TARGET_DIR) install
 DMRAID_LICENSE = GPLv2
 DMRAID_LICENSE_FILES = $(DMRAID_SUBDIR)/LICENSE_GPL $(DMRAID_SUBDIR)/LICENSE
 

package/dovecot/Config.in

@@ -24,13 +24,11 @@ config BR2_PACKAGE_DOVECOT_MYSQL
 	select BR2_PACKAGE_MYSQL
 	depends on BR2_INSTALL_LIBSTDCPP # mysql
 	depends on BR2_TOOLCHAIN_HAS_THREADS # mysql
-	depends on !BR2_avr32 # mysql
 	help
 	  Enable MySQL support.
 
 comment "mysql support needs a toolchain w/ C++, threads"
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS
-	depends on !BR2_avr32
 
 config BR2_PACKAGE_DOVECOT_OPENSSL
 	bool "openssl support"

package/dropbear/dropbear.mk

@@ -53,9 +53,9 @@ endef
 
 define DROPBEAR_INSTALL_INIT_SYSTEMD
 	$(INSTALL) -D -m 644 package/dropbear/dropbear.service \
-		$(TARGET_DIR)/etc/systemd/system/dropbear.service
+		$(TARGET_DIR)/lib/systemd/system/dropbear.service
 	mkdir -p $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants
-	ln -fs ../dropbear.service \
+	ln -fs /lib/systemd/system/dropbear.service \
 		$(TARGET_DIR)/etc/systemd/system/multi-user.target.wants/dropbear.service
 endef
 

package/dropwatch/dropwatch.mk

@@ -13,10 +13,8 @@ DROPWATCH_LICENSE_FILES = COPYING
 
 # libbfd may be linked to libintl
 # Ugly... but LDFLAGS are hardcoded anyway
-#
-# Also: always need to add -liberty to hardcoded LDFLAGS for avr32
 DROPWATCH_LDFLAGS = \
-	$(TARGET_LDFLAGS) -lbfd -liberty -lreadline -lnl-3 -lnl-genl-3 \
+	$(TARGET_LDFLAGS) -lbfd -lreadline -lnl-3 -lnl-genl-3 \
 		-lpthread -lncurses -lm
 
 ifeq ($(BR2_NEEDS_GETTEXT_IF_LOCALE),y)

package/dvb-apps/0002-Fix-compiler-warning-flags.patch

@@ -1,25 +0,0 @@
-When building for avr32, the build fails as follows.
-
-  cc1: error: unrecognized command line option "-Wno-packed-bitfield-compat"
-
-An example of an autobuild failure arising from this is the following.
-
-  http://autobuild.buildroot.net/results/92e/92e472004812a3616f62d766a9ea07a997a66e89/
-
-Clearly, not all toolchains provide a gcc that understands
-the -Wno-packed-bitfield-compat flag; remove usage of this flag.
-
-Signed-off-by: Simon Dawson <spdawson@gmail.com>
-
-diff -Nurp a/util/scan/Makefile b/util/scan/Makefile
---- a/util/scan/Makefile	2013-11-24 17:04:10.000000000 +0000
-+++ b/util/scan/Makefile	2013-12-13 09:37:11.967975173 +0000
-@@ -14,7 +14,7 @@ inst_bin = $(binaries)
- 
- removing = atsc_psip_section.c atsc_psip_section.h
- 
--CPPFLAGS += -Wno-packed-bitfield-compat -D__KERNEL_STRICT_NAMES
-+CPPFLAGS += -D__KERNEL_STRICT_NAMES
- 
- .PHONY: all
- 

package/e2fsprogs/Config.in

@@ -50,7 +50,7 @@ config BR2_PACKAGE_E2FSPROGS_E2UNDO
 
 config BR2_PACKAGE_E2FSPROGS_E4DEFRAG
 	bool "e4defrag"
-	depends on !BR2_avr32 && !BR2_nios2 # fallocate not implemented
+	depends on !BR2_nios2 # fallocate not implemented
 	depends on !BR2_TOOLCHAIN_USES_UCLIBC # sync_file_range not impl
 
 comment "e4defrag needs an (e)glibc or musl toolchain"

package/ecryptfs-utils/Config.in

@@ -9,7 +9,7 @@ config BR2_PACKAGE_ECRYPTFS_UTILS
 	select BR2_PACKAGE_GETENT
 	depends on BR2_USE_WCHAR # gettext
 	depends on BR2_USE_MMU # keyutils
-	depends on !BR2_avr32 && !BR2_microblaze # keyutils
+	depends on !BR2_microblaze # keyutils
 	depends on BR2_LARGEFILE # libnss
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libnss -> libnspr
 	depends on BR2_PACKAGE_LIBNSPR_ARCH_SUPPORT # libnss -> libnspr
@@ -31,7 +31,7 @@ config BR2_PACKAGE_ECRYPTFS_UTILS
 	  http://ecryptfs.org
 
 comment "ecryptfs-utils needs a toolchain w/ largefile, threads, wchar, dynamic library"
-	depends on !BR2_avr32 && !BR2_microblaze
+	depends on !BR2_microblaze
 	depends on BR2_PACKAGE_LIBNSPR_ARCH_SUPPORT
 	depends on BR2_USE_MMU
 	depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || \

package/efl/expedite/Config.in

@@ -5,7 +5,6 @@ config BR2_PACKAGE_EXPEDITE
 	select BR2_PACKAGE_LIBEET
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libevas
-	depends on !BR2_avr32 # libevas
 	help
 	  Expedite is the official Evas benchmark tool. It can test different
 	  engines, such as X11, XRender, OpenGL (also ES variant), SDL,
@@ -15,4 +14,3 @@ config BR2_PACKAGE_EXPEDITE
 comment "expedite needs a toolchain w/ C++, threads"
 	depends on !BR2_INSTALL_LIBSTDCPP
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
-	depends on !BR2_avr32

package/efl/libecore/Config.in

@@ -39,10 +39,8 @@ config BR2_PACKAGE_LIBECORE_EVAS
 	bool "libecore Evas support"
 	select BR2_PACKAGE_LIBEVAS
 	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on !BR2_avr32 # libevas
 
 comment "evas support needs a toolchain w/ threads"
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
-	depends on !BR2_avr32 # libevas
 
 endif # BR2_PACKAGE_LIBECORE

package/efl/libedbus/Config.in

@@ -16,7 +16,6 @@ if BR2_PACKAGE_LIBEDBUS
 
 config BR2_PACKAGE_LIBEDBUS_BLUEZ
 	bool "bluez support"
-	depends on !BR2_avr32 # bluez_utils
 	depends on !BR2_STATIC_LIBS # bluez_utils
 	depends on BR2_USE_WCHAR # bluez_utils -> glib2
 	depends on BR2_TOOLCHAIN_HAS_THREADS # bluez_utils -> glib2
@@ -25,7 +24,6 @@ config BR2_PACKAGE_LIBEDBUS_BLUEZ
 	  Bluetooth support.
 
 comment "bluez support needs a toolchain w/ wchar, threads, dynamic library"
-	depends on !BR2_avr32
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS
 
 config BR2_PACKAGE_LIBEDBUS_CONNMAN

package/efl/libedje/Config.in

@@ -1,5 +1,4 @@
 comment "libedje needs a toolchain w/ threads"
-	depends on !BR2_avr32
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
 
 config BR2_PACKAGE_LIBEDJE
@@ -11,7 +10,6 @@ config BR2_PACKAGE_LIBEDJE
 	select BR2_PACKAGE_LIBEMBRYO
 	select BR2_PACKAGE_LIBEVAS
 	select BR2_PACKAGE_LUA
-	depends on !BR2_avr32 # libevas
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libevas
 	help
 	  A graphical layout and animation library for animated

package/efl/libelementary/Config.in

@@ -1,5 +1,4 @@
 comment "libelementary needs a toolchain w/ threads"
-	depends on !BR2_avr32
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
 
 config BR2_PACKAGE_LIBELEMENTARY
@@ -8,7 +7,6 @@ config BR2_PACKAGE_LIBELEMENTARY
 	select BR2_PACKAGE_LIBEVAS
 	select BR2_PACKAGE_LIBECORE
 	select BR2_PACKAGE_LIBEDJE
-	depends on !BR2_avr32 # libevas
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libevas
 	help
 	  Elementary is a widget toolkit and EFL wrapper and convenience

package/efl/libethumb/Config.in

@@ -1,5 +1,4 @@
 comment "libethumb needs a toolchain w/ threads"
-	depends on !BR2_avr32
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
 
 config BR2_PACKAGE_LIBETHUMB
@@ -9,7 +8,6 @@ config BR2_PACKAGE_LIBETHUMB
 	select BR2_PACKAGE_LIBECORE
 	select BR2_PACKAGE_LIBECORE_EVAS
 	select BR2_PACKAGE_LIBEDJE
-	depends on !BR2_avr32 # libevas
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libevas
 	help
 	  Ethumb is a library for generating thumbnail images of documents.

package/efl/libevas/Config.in

@@ -1,10 +1,8 @@
 comment "libevas needs a toolchain w/ threads"
-	depends on !BR2_avr32
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
 
 config BR2_PACKAGE_LIBEVAS
 	bool "libevas"
-	depends on !BR2_avr32 # no epoll_create1 or inotify_init1
 	# libevas should normally build without threads, but due to a
 	# build issue when the async preloader is disabled, which is
 	# needed when no threads are available, we don't allow evas to

package/elfutils/Config.in

@@ -1,5 +1,4 @@
 comment "elfutils needs a toolchain w/ largefile, wchar, dynamic library"
-	depends on !BR2_avr32
 	depends on !BR2_bfin
 	depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || BR2_STATIC_LIBS
 
@@ -10,9 +9,6 @@ config BR2_PACKAGE_ELFUTILS
 	depends on BR2_LARGEFILE
 	depends on BR2_USE_WCHAR
 	depends on !BR2_STATIC_LIBS
-	# canonicalize_file_name() not available on uClibc 0.9.31, used
-	# only for AVR32
-	depends on !BR2_avr32
 	# build issue caused by the _ prefix used on blackfin for
 	# assembly symbols
 	depends on !BR2_bfin

package/enlightenment/Config.in

@@ -26,7 +26,6 @@ config BR2_PACKAGE_ENLIGHTENMENT
 	# libedbus -> dbus, efl libraries
 	depends on BR2_USE_MMU
 	depends on BR2_PACKAGE_XORG7
-	depends on !BR2_avr32 # libevas
 	# libevas-generic-loaders-svg -> librsvg -> pango -> cairo
 	depends on BR2_ARCH_HAS_ATOMICS
 	help
@@ -42,4 +41,3 @@ comment "enlightenment needs a toolchain w/ wchar, C++, threads"
 	depends on BR2_PACKAGE_XORG7 && BR2_USE_MMU
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP
 	depends on BR2_ARCH_HAS_ATOMICS
-	depends on !BR2_avr32

package/eudev/Config.in

@@ -1,6 +1,5 @@
 config BR2_PACKAGE_EUDEV
 	bool "eudev"
-	depends on !BR2_avr32 # no epoll_create1
 	depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV
 	depends on BR2_USE_MMU # uses fork()
 	depends on BR2_LARGEFILE # util-linux
@@ -32,11 +31,9 @@ config BR2_PACKAGE_EUDEV_RULES_GEN
 endif
 
 comment "eudev needs eudev /dev management"
-	depends on !BR2_avr32
 	depends on BR2_USE_MMU
 	depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV
 
 comment "eudev needs a toolchain w/ largefile, wchar, dynamic library"
-	depends on !BR2_avr32
 	depends on BR2_USE_MMU
 	depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || BR2_STATIC_LIBS

package/exfat-utils/exfat-utils.hash

@@ -0,0 +1,2 @@
+# From https://code.google.com/p/exfat/wiki/Downloads?tm=2
+sha1	ddf0819c27aeb3eaae5aae0423d4dafc54d477da	exfat-utils-1.1.1.tar.gz

package/exfat-utils/exfat-utils.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-EXFAT_UTILS_VERSION = 1.1.0
+EXFAT_UTILS_VERSION = 1.1.1
 EXFAT_UTILS_SITE = http://distfiles.gentoo.org/distfiles
 EXFAT_UTILS_DEPENDENCIES = host-scons
 EXFAT_UTILS_LICENSE = GPLv3+

package/exfat/exfat.hash

@@ -0,0 +1,2 @@
+# From https://code.google.com/p/exfat/wiki/Downloads?tm=2
+sha1	060560f74dbce4dc947c7e658e75fdf339bc10ff	fuse-exfat-1.1.0.tar.gz

package/fbv/0001-arch.patch.avr32

@@ -1,48 +0,0 @@
-diff -ur fbv-1.0b/fb_display.c fbv-1.0b-avr32/fb_display.c
---- fbv-1.0b/fb_display.c	2004-09-07 14:09:43.000000000 +0200
-+++ fbv-1.0b-avr32/fb_display.c	2006-05-04 13:30:25.000000000 +0200
-@@ -276,9 +276,6 @@
- 	    for(i = 0; i < yc; i++, fbptr += scr_xs * cpp, imptr += pic_xs * cpp)
- 			memcpy(fbptr, imptr, xc * cpp);
- 		
--	if(cpp == 1)
--	    set8map(fh, &map_back);
--	
- 	munmap(fb, scr_xs * scr_ys * cpp);
- }
- 
-@@ -293,17 +290,17 @@
- inline static unsigned short make15color(unsigned char r, unsigned char g, unsigned char b)
- {
-     return (
--	(((r >> 3) & 31) << 10) |
-+	(((r >> 3) & 31)) |
- 	(((g >> 3) & 31) << 5)  |
--	 ((b >> 3) & 31)        );
-+	 ((b >> 3) & 31) << 10);
- }
- 
- inline static unsigned short make16color(unsigned char r, unsigned char g, unsigned char b)
- {
-     return (
--	(((r >> 3) & 31) << 11) |
--	(((g >> 2) & 63) << 5)  |
--	 ((b >> 3) & 31)        );
-+	(((r >> 3) & 31))      |
-+	(((g >> 3) & 31) << 5) |
-+	 ((b >> 3) & 31) << 10);
- }
- 
- void* convertRGB2FB(int fh, unsigned char *rgbbuff, unsigned long count, int bpp, int *cpp)
-@@ -342,9 +339,9 @@
- 	    *cpp = 4;
- 	    i_fbbuff = (unsigned int *) malloc(count * sizeof(unsigned int));
- 	    for(i = 0; i < count ; i++)
--		i_fbbuff[i] = ((rgbbuff[i*3] << 16) & 0xFF0000) |
-+		i_fbbuff[i] = ((rgbbuff[i*3+2] << 16) & 0xFF0000) |
- 			    ((rgbbuff[i*3+1] << 8) & 0xFF00) |
--			    (rgbbuff[i*3+2] & 0xFF);
-+			    (rgbbuff[i*3] & 0xFF);
- 	    fbbuff = (void *) i_fbbuff;
- 	    break;
- 	default:

package/ffmpeg/ffmpeg.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256	9d383d7ef9dffe6980849a93accfef848e197fdac9b1fbd02fca2798f863411a	ffmpeg-2.5.3.tar.bz2
+sha256  cc91c166c2b0ad9aacc533e4d5637912df583b43834c68aeec12ded7e082a286  ffmpeg-2.5.4.tar.bz2

package/ffmpeg/ffmpeg.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-FFMPEG_VERSION = 2.5.3
+FFMPEG_VERSION = 2.5.4
 FFMPEG_SOURCE = ffmpeg-$(FFMPEG_VERSION).tar.bz2
 FFMPEG_SITE = http://ffmpeg.org/releases
 FFMPEG_INSTALL_STAGING = YES

package/fio/Config.in

@@ -7,10 +7,8 @@ config BR2_PACKAGE_FIO
 	# release of uClibc, but is part of uClibc Git, and backported
 	# in Buildroot patch set of uClibc 0.9.33. Therefore, we
 	# disable the build of fio for external uClibc toolchains
-	# (which use an unknown uClibc version) and for 0.9.31 which
-	# don't have posix_madvise().
-	depends on !BR2_TOOLCHAIN_EXTERNAL_UCLIBC && \
-		!BR2_UCLIBC_VERSION_0_9_31
+	# (which use an unknown uClibc version)
+	depends on !BR2_TOOLCHAIN_EXTERNAL_UCLIBC
 	# fio uses fallocate() which becomes fallocate64() while compiling
 	# with BR2_LARGEFILE but fallocate64() is not available on nios2
 	depends on !BR2_nios2

package/fltk/fltk.hash

@@ -0,0 +1,4 @@
+# From http://www.fltk.org/software.php?VERSION=1.3.3
+md5	9ccdb0d19dc104b87179bd9fd10822e3	fltk-1.3.3-source.tar.gz
+# Locally generated
+sha256	f8398d98d7221d40e77bc7b19e761adaf2f1ef8bb0c30eceb7beb4f2273d0d97	fltk-1.3.3-source.tar.gz

package/fltk/fltk.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-FLTK_VERSION = 1.3.2
+FLTK_VERSION = 1.3.3
 FLTK_SOURCE = fltk-$(FLTK_VERSION)-source.tar.gz
 FLTK_SITE = http://fltk.org/pub/fltk/$(FLTK_VERSION)
 FLTK_INSTALL_STAGING = YES
@@ -27,6 +27,20 @@ FLTK_CONF_OPTS += --enable-cairo
 FLTK_DEPENDENCIES += cairo
 endif
 
+ifeq ($(BR2_PACKAGE_XLIB_LIBXCURSOR),y)
+FLTK_DEPENDENCIES += xlib_libXcursor
+FLTK_CONF_OPTS += --enable-xcursor
+else
+FLTK_CONF_OPTS += --disable-xcursor
+endif
+
+ifeq ($(BR2_PACKAGE_XLIB_LIBXFIXES),y)
+FLTK_DEPENDENCIES += xlib_libXfixes
+FLTK_CONF_OPTS += --enable-xfixes
+else
+FLTK_CONF_OPTS += --disable-xfixes
+endif
+
 ifeq ($(BR2_PACKAGE_XLIB_LIBXFT),y)
 FLTK_CONF_ENV += ac_cv_path_FTCONFIG=$(STAGING_DIR)/usr/bin/freetype-config
 FLTK_DEPENDENCIES += xlib_libXft

package/fluxbox/fluxbox.hash

@@ -1,2 +1,2 @@
 # Locally computed:
-sha256  05cc2149b79155121cb0fff6d4fd0289e3edb669390714e0b54071bec987e686  fluxbox-1.3.6.tar.bz2
+sha256  fc8c75fe94c54ed5a5dd3fd4a752109f8949d6df67a48e5b11a261403c382ec0  fluxbox-1.3.7.tar.xz

package/fluxbox/fluxbox.mk

@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-FLUXBOX_VERSION = 1.3.6
-FLUXBOX_SOURCE = fluxbox-$(FLUXBOX_VERSION).tar.bz2
+FLUXBOX_VERSION = 1.3.7
+FLUXBOX_SOURCE = fluxbox-$(FLUXBOX_VERSION).tar.xz
 FLUXBOX_SITE = http://downloads.sourceforge.net/project/fluxbox/fluxbox/$(FLUXBOX_VERSION)
 FLUXBOX_LICENSE = MIT
 FLUXBOX_LICENSE_FILES = COPYING

package/freerdp/Config.in

@@ -1,14 +1,43 @@
 config BR2_PACKAGE_FREERDP
 	bool "freerdp"
+	depends on BR2_USE_WCHAR
 	select BR2_PACKAGE_OPENSSL
-	select BR2_PACKAGE_XLIB_LIBX11
-	select BR2_PACKAGE_XLIB_LIBXT
-	select BR2_PACKAGE_XLIB_LIBXEXT
-	select BR2_PACKAGE_XLIB_LIBXCURSOR
 	select BR2_PACKAGE_ZLIB
-	depends on BR2_PACKAGE_XORG7
 	help
 	  FreeRDP is a free implementation of the Remote Desktop
 	  Protocol (RDP), released under the Apache license
 
+	  This only installs the freerdp library.
+
 	  http://www.freerdp.com/
+
+	  Note: this also installs a key and certificate in
+	  /etc/freerdp/keys/ . These are publicly-known, as they
+	  are present in FreeRDP's source tree. It is strongly
+	  suggested that you overwrite them with your own set,
+	  either in an overlay rootfs or in a post-build script.
+
+if BR2_PACKAGE_FREERDP
+
+config BR2_PACKAGE_FREERDP_SERVER
+	bool "build server"
+	depends on BR2_PACKAGE_XORG7
+	select BR2_PACKAGE_XLIB_LIBX11
+	select BR2_PACKAGE_XLIB_LIBXDAMAGE
+	select BR2_PACKAGE_XLIB_LIBXEXT
+	select BR2_PACKAGE_XLIB_LIBXFIXES
+
+config BR2_PACKAGE_FREERDP_CLIENT
+	bool "build client"
+	default y
+	depends on BR2_PACKAGE_XORG7
+	select BR2_PACKAGE_XLIB_LIBX11
+	select BR2_PACKAGE_XLIB_LIBXEXT
+
+comment "freerdp server and client need X.Org"
+	depends on !BR2_PACKAGE_XORG7
+
+endif
+
+comment "freerdp needs a toolchain w/ wchar"
+	depends on !BR2_USE_WCHAR

package/freerdp/freerdp-0002-fix-building-shared-libs.patch

@@ -0,0 +1,23 @@
+winpr/tools: fix building shared libs
+
+libwinpr-makecert-tool.a is used to build libxfreerdp-server.so, so even
+if we are building a static libwinpr-makecert-tool.a library, we need to
+build it with -fPIC.
+
+Patch and commit log suggested by Samuel MARTIN.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+Cc: Samuel Martin <s.martin49@gmail.com>
+
+diff -durN freerdp-440916eae2e07463912d5fe507677e67096eb083.orig/winpr/tools/makecert/CMakeLists.txt freerdp-440916eae2e07463912d5fe507677e67096eb083/winpr/tools/makecert/CMakeLists.txt
+--- freerdp-440916eae2e07463912d5fe507677e67096eb083.orig/winpr/tools/makecert/CMakeLists.txt	2014-08-25 06:52:43.000000000 -0700
++++ freerdp-440916eae2e07463912d5fe507677e67096eb083/winpr/tools/makecert/CMakeLists.txt	2014-10-24 15:39:39.600319523 -0700
+@@ -43,3 +43,8 @@
+ 
+ set_property(TARGET ${MODULE_NAME} PROPERTY FOLDER "WinPR/Tools")
+ 
++if(BUILD_SHARED_LIBS)
++	# build libwinpr-makecert-tool.a with PIC because it is used to build
++	# the shared library libxfreerdp-server.so.
++	set_property(TARGET ${MODULE_NAME} PROPERTY POSITION_INDEPENDENT_CODE TRUE)
++endif()

package/freerdp/freerdp.mk

@@ -5,14 +5,22 @@
 ################################################################################
 
 # Changeset on the stable-1.1 branch
-FREERDP_VERSION = 440916eae2e07463912d5fe507677e67096eb083
+FREERDP_VERSION = b21ff842ef3de5837513042dc30488b12bd9cf9d
 FREERDP_SITE = $(call github,FreeRDP,FreeRDP,$(FREERDP_VERSION))
-FREERDP_DEPENDENCIES = openssl zlib \
-	xlib_libX11 xlib_libXt xlib_libXext xlib_libXcursor
+FREERDP_DEPENDENCIES = openssl zlib
 FREERDP_LICENSE = Apache-2.0
 FREERDP_LICENSE_FILES = LICENSE
 
-FREERDP_CONF_OPTS = -DWITH_MANPAGES=OFF
+FREERDP_INSTALL_STAGING = YES
+
+FREERDP_CONF_OPTS = -DWITH_MANPAGES=OFF -Wno-dev
+
+ifeq ($(BR2_PACKAGE_GSTREAMER),y)
+FREERDP_CONF_OPTS += -DWITH_GSTREAMER=ON
+FREERDP_DEPENDENCIES += gstreamer
+else
+FREERDP_CONF_OPTS += -DWITH_GSTREAMER=OFF
+endif
 
 ifeq ($(BR2_PACKAGE_CUPS),y)
 FREERDP_CONF_OPTS += -DWITH_CUPS=ON
@@ -42,6 +50,77 @@ else
 FREERDP_CONF_OPTS += -DWITH_PULSEAUDIO=OFF
 endif
 
+ifeq ($(BR2_ARM_CPU_HAS_NEON),y)
+FREERDP_CONF_OPTS += -DWITH_NEON=ON
+else
+FREERDP_CONF_OPTS += -DWITH_NEON=OFF
+endif
+
+ifeq ($(BR2_X86_CPU_HAS_SSE2),y)
+FREERDP_CONF_OPTS += -DWITH_SSE2=ON
+else
+FREERDP_CONF_OPTS += -DWITH_SSE2=OFF
+endif
+
+ifeq ($(BR2_arm)$(BR2_armeb),y)
+FREERDP_CONF_OPTS += -DARM_FP_ABI=$(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI))
+endif
+
+#---------------------------------------
+# Enabling server and/or client
+
+ifeq ($(BR2_PACKAGE_FREERDP_SERVER),y)
+FREERDP_CONF_OPTS += -DWITH_SERVER=ON -DWITH_SERVER_INTERFACE=ON
+else
+FREERDP_CONF_OPTS += -DWITH_SERVER=OFF -DWITH_SERVER_INTERFACE=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_FREERDP_CLIENT),y)
+FREERDP_CONF_OPTS += -DWITH_CLIENT=ON -DWITH_CLIENT_INTERFACE=ON
+else
+FREERDP_CONF_OPTS += -DWITH_CLIENT=OFF -DWITH_CLIENT_INTERFACE=OFF
+endif
+
+#---------------------------------------
+# X.Org libs for client and/or server
+
+ifneq ($(BR2_PACKAGE_FREERDP_SERVER)$(BR2_PACKAGE_FREERDP_CLIENT),)
+
+# Those two are mandatory for both the server and the client
+FREERDP_DEPENDENCIES += xlib_libX11 xlib_libXext
+FREERDP_CONF_OPTS += -DWITH_X11=ON
+
+# The following libs are either optional or mandatory only for either
+# the server or the client. A mandatory library for either one is
+# selected from Kconfig, so we can make it conditional here
+ifeq ($(BR2_PACKAGE_XLIB_LIBXCURSOR),y)
+FREERDP_CONF_OPTS += -DWITH_XCURSOR=ON
+FREERDP_DEPENDENCIES += xlib_libXcursor
+else
+FREERDP_CONF_OPTS += -DWITH_XCURSOR=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_XLIB_LIBXDAMAGE),y)
+FREERDP_CONF_OPTS += -DWITH_XDAMAGE=ON
+FREERDP_DEPENDENCIES += xlib_libXdamage
+else
+FREERDP_CONF_OPTS += -DWITH_XDAMAGE=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_XLIB_LIBXFIXES),y)
+FREERDP_CONF_OPTS += -DWITH_XFIXES=ON
+FREERDP_DEPENDENCIES += xlib_libXfixes
+else
+FREERDP_CONF_OPTS += -DWITH_XFIXES=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_XLIB_LIBXI),y)
+FREERDP_CONF_OPTS += -DWITH_XI=ON
+FREERDP_DEPENDENCIES += xlib_libXi
+else
+FREERDP_CONF_OPTS += -DWITH_XI=OFF
+endif
+
 ifeq ($(BR2_PACKAGE_XLIB_LIBXINERAMA),y)
 FREERDP_CONF_OPTS += -DWITH_XINERAMA=ON
 FREERDP_DEPENDENCIES += xlib_libXinerama
@@ -56,27 +135,52 @@ else
 FREERDP_CONF_OPTS += -DWITH_XKBFILE=OFF
 endif
 
-ifeq ($(BR2_PACKAGE_XLIB_LIBXV),y)
-FREERDP_CONF_OPTS += -DWITH_XV=ON
-FREERDP_DEPENDENCIES += xlib_libXv
+ifeq ($(BR2_PACKAGE_XLIB_LIBXRANDR),y)
+FREERDP_CONF_OPTS += -DWITH_XRANDR=ON
+FREERDP_DEPENDENCIES += xlib_libXrandr
 else
-FREERDP_CONF_OPTS += -DWITH_XV=OFF
+FREERDP_CONF_OPTS += -DWITH_XRANDR=OFF
 endif
 
-ifeq ($(BR2_ARM_CPU_HAS_NEON),y)
-FREERDP_CONF_OPTS += -DWITH_NEON=ON
+ifeq ($(BR2_PACKAGE_XLIB_LIBXRENDER),y)
+FREERDP_CONF_OPTS += -DWITH_XRENDER=ON
+FREERDP_DEPENDENCIES += xlib_libXrender
 else
-FREERDP_CONF_OPTS += -DWITH_NEON=OFF
+FREERDP_CONF_OPTS += -DWITH_XRENDER=OFF
 endif
 
-ifeq ($(BR2_X86_CPU_HAS_SSE2),y)
-FREERDP_CONF_OPTS += -DWITH_SSE2=ON
+ifeq ($(BR2_PACKAGE_XLIB_LIBXTST),y)
+FREERDP_CONF_OPTS += -DWITH_XTEST=ON
+FREERDP_DEPENDENCIES += xlib_libXtst
 else
-FREERDP_CONF_OPTS += -DWITH_SSE2=OFF
+FREERDP_CONF_OPTS += -DWITH_XTEST=OFF
 endif
 
-ifeq ($(BR2_arm)$(BR2_armeb),y)
-FREERDP_CONF_OPTS += -DARM_FP_ABI=$(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI))
+ifeq ($(BR2_PACKAGE_XLIB_LIBXV),y)
+FREERDP_CONF_OPTS += -DWITH_XV=ON
+FREERDP_DEPENDENCIES += xlib_libXv
+else
+FREERDP_CONF_OPTS += -DWITH_XV=OFF
 endif
 
+else # ! SERVER && ! CLIENT
+
+FREERDP_CONF_OPTS += -DWITH_X11=OFF
+
+endif # ! SERVER && ! CLIENT
+
+# Install the server key and certificate, so that a client can connect.
+# A user can override them with its own in a post-build script, if needed.
+# We install them even if the server is not enabled, since another server
+# can be built and linked with libfreerdp (e.g. weston with the  RDP
+# backend). Key and cert are installed world-readable, so non-root users
+# can start a server.
+define FREERDP_INSTALL_KEYS
+	$(INSTALL) -m 0644 -D $(@D)/server/X11/server.key \
+		      $(TARGET_DIR)/etc/freerdp/keys/server.key
+	$(INSTALL) -m 0644 -D $(@D)/server/X11/server.crt \
+		      $(TARGET_DIR)/etc/freerdp/keys/server.crt
+endef
+FREERDP_POST_INSTALL_TARGET_HOOKS += FREERDP_INSTALL_KEYS
+
 $(eval $(cmake-package))

package/gadgetfs-test/Config.in

@@ -11,7 +11,7 @@ config BR2_PACKAGE_GADGETFS_TEST_USE_AIO
 	select BR2_PACKAGE_LIBAIO
 	# libaio is available only on few architectures
 	depends on \
-		BR2_arm   || BR2_armeb || BR2_avr32  || BR2_i386    || \
+		BR2_arm   || BR2_armeb || BR2_i386   || \
 		BR2_m68k  || BR2_mips  || BR2_mipsel || BR2_powerpc || \
 		BR2_sparc || BR2_x86_64
 	help

package/gcc/4.2.2-avr32-2.1.5/1001-gcc-4.2.x-inhibit-libc.patch

@@ -1,49 +0,0 @@
---- gcc-4.2.4/gcc/unwind-sjlj.c.khem	2010-08-11 12:45:28.000000000 -0700
-+++ gcc-4.2.4/gcc/unwind-sjlj.c	2010-08-11 12:45:50.000000000 -0700
-@@ -28,6 +28,8 @@
-    Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-    02110-1301, USA.  */
- 
-+#ifndef inhibit_libc
-+
- #include "tconfig.h"
- #include "tsystem.h"
- #include "coretypes.h"
-@@ -326,3 +328,4 @@ uw_identify_context (struct _Unwind_Cont
- #include "unwind.inc"
- 
- #endif /* USING_SJLJ_EXCEPTIONS */
-+#endif
---- gcc-4.2.4/gcc/unwind-dw2.c.khem	2010-08-11 12:42:45.000000000 -0700
-+++ gcc-4.2.4/gcc/unwind-dw2.c	2010-08-11 12:43:17.000000000 -0700
-@@ -28,6 +28,8 @@
-    Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-    02110-1301, USA.  */
- 
-+#ifndef inhibit_libc
-+
- #include "tconfig.h"
- #include "tsystem.h"
- #include "coretypes.h"
-@@ -1537,3 +1539,5 @@ alias (_Unwind_SetIP);
- #endif
- 
- #endif /* !USING_SJLJ_EXCEPTIONS */
-+#endif
-+
---- gcc-4.2.4/gcc/unwind-dw2-fde-glibc.c.khem	2010-08-11 12:44:25.000000000 -0700
-+++ gcc-4.2.4/gcc/unwind-dw2-fde-glibc.c	2010-08-11 12:44:48.000000000 -0700
-@@ -29,6 +29,8 @@
-    segment and dl_iterate_phdr to avoid register/deregister calls at
-    DSO load/unload.  */
- 
-+#ifndef inhibit_libc
-+
- #ifndef _GNU_SOURCE
- #define _GNU_SOURCE 1
- #endif
-@@ -438,3 +440,4 @@ _Unwind_Find_FDE (void *pc, struct dwarf
- #if defined (USE_GAS_SYMVER) && defined (SHARED) && defined (USE_LIBUNWIND_EXCEPTIONS)
- alias (_Unwind_Find_FDE);
- #endif
-+#endif

package/gcc/4.2.2-avr32-2.1.5/903-avr32-fix-removal-of-redundant-cast-operations.patch

@@ -1,16 +0,0 @@
-Index: trunk/gcc/config/avr32/avr32.c
-===================================================================
---- trunk/gcc/config/avr32/avr32.c	(revision 43495)
-+++ trunk/gcc/config/avr32/avr32.c	(revision 43496)
-@@ -6499,6 +6499,11 @@
- 		    break;
- 		}
- 
-+              /* Check if we have a call and the register is used as an argument. */
-+              if (CALL_P (scan)
-+                  && find_reg_fusage (scan, USE, reg) )
-+                break;
-+
- 	      if (!reg_mentioned_p (reg, PATTERN (scan)))
- 		continue;
- 

package/gcc/4.2.2-avr32-2.1.5/904-avr32-fix-conditional-insn-which-clobbers-cc_status.patch

@@ -1,150 +0,0 @@
-Index: gcc-4.2.2/gcc/config/avr32/avr32.c
-===================================================================
---- gcc-4.2.2.orig/gcc/config/avr32/avr32.c	2008-09-19 14:29:20.000000000 +0200
-+++ gcc-4.2.2/gcc/config/avr32/avr32.c	2008-09-19 14:30:02.000000000 +0200
-@@ -1788,7 +1788,7 @@
-     {
-       if (TREE_CODE (*node) != FUNCTION_DECL)
- 	{
--	  warning ("`%s' attribute only applies to functions",
-+	  warning (OPT_Wattributes,"`%s' attribute only applies to functions",
- 		   IDENTIFIER_POINTER (name));
- 	  *no_add_attrs = true;
- 	}
-@@ -1802,7 +1802,7 @@
- 	{
- 	  if (avr32_isr_value (args) == AVR32_FT_UNKNOWN)
- 	    {
--	      warning ("`%s' attribute ignored", IDENTIFIER_POINTER (name));
-+	      warning (OPT_Wattributes,"`%s' attribute ignored", IDENTIFIER_POINTER (name));
- 	      *no_add_attrs = true;
- 	    }
- 	}
-@@ -1829,7 +1829,7 @@
- 	    }
- 	  else
- 	    {
--	      warning ("`%s' attribute ignored", IDENTIFIER_POINTER (name));
-+	      warning (OPT_Wattributes,"`%s' attribute ignored", IDENTIFIER_POINTER (name));
- 	    }
- 	}
-     }
-@@ -1847,7 +1847,7 @@
- {
-   if (TREE_CODE (*node) != FUNCTION_DECL)
-     {
--      warning ("%qs attribute only applies to functions",
-+      warning (OPT_Wattributes,"%qs attribute only applies to functions",
- 	       IDENTIFIER_POINTER (name));
-       *no_add_attrs = true;
-     }
-@@ -1866,13 +1866,13 @@
- {
-   if (TREE_CODE (*node) == FUNCTION_TYPE || TREE_CODE (*node) == METHOD_TYPE)
-     {
--      warning ("`%s' attribute not yet supported...",
-+      warning (OPT_Wattributes,"`%s' attribute not yet supported...",
- 	       IDENTIFIER_POINTER (name));
-       *no_add_attrs = true;
-       return NULL_TREE;
-     }
- 
--  warning ("`%s' attribute only applies to functions",
-+  warning (OPT_Wattributes,"`%s' attribute only applies to functions",
- 	   IDENTIFIER_POINTER (name));
-   *no_add_attrs = true;
-   return NULL_TREE;
-@@ -4215,51 +4215,6 @@
- 
- 
- void
--avr32_asm_output_ascii (FILE * stream, char *ptr, int len)
--{
--  int i, i_new = 0;
--  char *new_ptr = xmalloc (4 * len);
--  if (new_ptr == NULL)
--    internal_error ("Out of memory.");
--
--  for (i = 0; i < len; i++)
--    {
--      if (ptr[i] == '\n')
--	{
--	  new_ptr[i_new++] = '\\';
--	  new_ptr[i_new++] = '0';
--	  new_ptr[i_new++] = '1';
--	  new_ptr[i_new++] = '2';
--	}
--      else if (ptr[i] == '\"')
--	{
--	  new_ptr[i_new++] = '\\';
--	  new_ptr[i_new++] = '\"';
--	}
--      else if (ptr[i] == '\\')
--	{
--	  new_ptr[i_new++] = '\\';
--	  new_ptr[i_new++] = '\\';
--	}
--      else if (ptr[i] == '\0' && i + 1 < len)
--	{
--	  new_ptr[i_new++] = '\\';
--	  new_ptr[i_new++] = '0';
--	}
--      else
--	{
--	  new_ptr[i_new++] = ptr[i];
--	}
--    }
--
--  /* Terminate new_ptr. */
--  new_ptr[i_new] = '\0';
--  fprintf (stream, "\t.ascii\t\"%s\"\n", new_ptr);
--  free (new_ptr);
--}
--
--
--void
- avr32_asm_output_label (FILE * stream, const char *name)
- {
-   name = avr32_strip_name_encoding (name);
-@@ -4444,12 +4399,15 @@
-         rtx cmp;
-         rtx cmp_op0, cmp_op1;
-         rtx cond;
-+        rtx dest;
-+
-         if ( GET_CODE (exp) == COND_EXEC )
-           {
-             cmp_op0 = XEXP (COND_EXEC_TEST (exp), 0);
-             cmp_op1 = XEXP (COND_EXEC_TEST (exp), 1);
-             cond = COND_EXEC_TEST (exp);
--          } 
-+            dest = SET_DEST (COND_EXEC_CODE (exp));
-+          }
-         else
-           {
-             /* If then else conditional. compare operands are in operands
-@@ -4457,6 +4415,7 @@
-             cmp_op0 = recog_data.operand[4];
-             cmp_op1 = recog_data.operand[5];
-             cond = recog_data.operand[1];
-+            dest = SET_DEST (exp);
-           }
- 
-         if ( GET_CODE (cmp_op0) == AND )
-@@ -4466,7 +4425,15 @@
-                                  cmp_op0,
-                                  cmp_op1);
-         
--	if (is_compare_redundant (cmp, cond) == NULL_RTX)
-+        /* Check if the conditional insns updates a register present
-+           in the comparison, if so then we must reset the cc_status. */
-+        if (REG_P (dest)
-+            && (reg_mentioned_p (dest, cmp_op0)
-+                || reg_mentioned_p (dest, cmp_op1)))
-+          {
-+            CC_STATUS_INIT;
-+          }
-+	else if (is_compare_redundant (cmp, cond) == NULL_RTX)
- 	  {
- 	    /* Reset the nonstandard flag */
- 	    CC_STATUS_INIT;

package/gcc/4.2.2-avr32-2.1.5/905-avr32-optimize-movsf2-use-movh-to-move-immediates-into-register.patch

@@ -1,31 +0,0 @@
-Index: gcc-4.2.2/gcc/config/avr32/avr32.md
-===================================================================
---- gcc-4.2.2.orig/gcc/config/avr32/avr32.md	2008-09-19 14:23:34.000000000 +0200
-+++ gcc-4.2.2/gcc/config/avr32/avr32.md	2008-09-19 14:30:18.000000000 +0200
-@@ -803,14 +803,22 @@
- (define_insn "*movsf_internal"
-   [(set (match_operand:SF 0 "nonimmediate_operand"     "=r,r,r,r,m")
- 	(match_operand:SF 1 "general_operand"          "r, G,F,m,r"))]
--  "TARGET_SOFT_FLOAT
--   && (register_operand (operands[0], SFmode)
--       || register_operand (operands[1], SFmode))"
-+  "(register_operand (operands[0], SFmode)
-+    || register_operand (operands[1], SFmode))"
-   {
-     switch (which_alternative) {
-       case 0:
-       case 1: return "mov\t%0, %1";
--      case 2: return "mov\t%0, lo(%1)\;orh\t%0, hi(%1)";
-+      case 2: 
-+       {
-+        HOST_WIDE_INT target_float[2];
-+        real_to_target (target_float, CONST_DOUBLE_REAL_VALUE (operands[1]), SFmode);
-+        if ( TARGET_V2_INSNS 
-+             && avr32_hi16_immediate_operand (GEN_INT (target_float[0]), VOIDmode) )
-+           return "movh\t%0, hi(%1)";
-+        else
-+           return "mov\t%0, lo(%1)\;orh\t%0, hi(%1)";
-+       }
-       case 3:
-         if ( (REG_P(XEXP(operands[1], 0))
-               && REGNO(XEXP(operands[1], 0)) == SP_REGNUM)

package/gcc/4.2.2-avr32-2.1.5/990-fix-300-libstdc++-pic.patch

@@ -1,20 +0,0 @@
-libstdc++-v3: fix the effects of pre-applied 300-libstdc++-pic.patch
-
-This version of GCC comes with a number of pre-applied patches, among which is
-300-libstdc++-pic.patch that makes a PIC version of libstdc++. The resulting
-Makefile.in incorrectly refers to object files that should be insde the library.
-
-Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
-
-diff -uNrp host-gcc-final-4.2.2-avr32-2.1.5.orig/libstdc++-v3/src/Makefile.in host-gcc-final-4.2.2-avr32-2.1.5/libstdc++-v3/src/Makefile.in
---- host-gcc-final-4.2.2-avr32-2.1.5.orig/libstdc++-v3/src/Makefile.in	2008-07-04 00:18:42.000000000 +0300
-+++ host-gcc-final-4.2.2-avr32-2.1.5/libstdc++-v3/src/Makefile.in	2013-08-08 16:15:56.201258882 +0300
-@@ -804,7 +804,7 @@ install_debug:
- 
- install-exec-local:
- ifeq ($(enable_shared),yes)
--	$(AR) cru libstdc++_pic.a *.o $(top_builddir)/libsupc++/*.o
-+	$(AR) cru libstdc++_pic.a .libs/*.o $(top_builddir)/libsupc++/*.o
- 	$(INSTALL_DATA) libstdc++_pic.a $(DESTDIR)$(toolexeclibdir)
- endif
- 

package/gcc/4.9.2/920-libgcc-remove-unistd-header.patch

@@ -0,0 +1,12 @@
+Upstream status: In progress
+
+--- a/libgcc/config/nios2/linux-atomic.c
++++ b/libgcc/config/nios2/linux-atomic.c
+@@ -20,7 +20,6 @@
+ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+ <http://www.gnu.org/licenses/>.  */
+ 
+-#include <asm/unistd.h>
+ #define EFAULT  14
+ #define EBUSY   16
+ #define ENOSYS  38

package/gcc/Config.in.host

@@ -8,7 +8,6 @@ config BR2_GCC_SUPPORTS_GRAPHITE
 
 choice
 	prompt "GCC compiler Version"
-	default BR2_GCC_VERSION_4_2_2_AVR32_2_1_5 if BR2_avr32
 	default BR2_GCC_VERSION_4_8_ARC if BR2_arc
 	default BR2_GCC_VERSION_4_9_X if BR2_microblaze || BR2_powerpc64le
 	default BR2_GCC_VERSION_4_5_X if BR2_bfin
@@ -16,16 +15,11 @@ choice
 	help
 	  Select the version of gcc you wish to use.
 
-	config BR2_GCC_VERSION_4_2_2_AVR32_2_1_5
-		bool "gcc 4.2.2-avr32-2.1.5"
-		# Only supported architecture
-		depends on BR2_avr32
-
 	config BR2_GCC_VERSION_4_5_X
 		bool "gcc 4.5.x"
 		# Broken or unsupported architectures
 		depends on !BR2_microblaze && !BR2_aarch64 && !BR2_arc \
-			&& !BR2_avr32  && !BR2_powerpc64le
+			&& !BR2_powerpc64le && !BR2_nios2
 		# Broken or unsupported ARM cores
 		depends on !BR2_cortex_a7 && !BR2_cortex_a12 && \
 			!BR2_cortex_a15 && !BR2_fa526 && !BR2_pj4
@@ -46,7 +40,7 @@ choice
 		bool "gcc 4.7.x"
 		# Broken or unsupported architectures
 		depends on !BR2_microblaze && !BR2_aarch64 && !BR2_arc \
-			&& !BR2_avr32 && !BR2_bfin && !BR2_powerpc64le
+			&& !BR2_bfin && !BR2_powerpc64le && !BR2_nios2
 		# Broken or unsupported ARM cores
 		depends on !BR2_cortex_a12 && !BR2_pj4
 		# Broken or unsupported PPC cores
@@ -61,8 +55,8 @@ choice
 	config BR2_GCC_VERSION_4_8_X
 		bool "gcc 4.8.x"
 		# Broken or unsupported architectures
-		depends on !BR2_microblaze && !BR2_arc && !BR2_avr32 \
-			&& !BR2_bfin && !BR2_powerpc64le
+		depends on !BR2_microblaze && !BR2_arc \
+			&& !BR2_bfin && !BR2_powerpc64le && !BR2_nios2
 		# Broken or unsupported ARM cores
 		depends on !BR2_cortex_a12
 		# Broken or unsupported PPC cores
@@ -79,7 +73,7 @@ choice
 	config BR2_GCC_VERSION_4_9_X
 		bool "gcc 4.9.x"
 		# Broken or unsupported architectures
-		depends on !BR2_arc && !BR2_avr32 && !BR2_bfin
+		depends on !BR2_arc && !BR2_bfin
 		# PR60102 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60102
 		select BR2_GCC_NEEDS_MPC
 		select BR2_GCC_SUPPORTS_GRAPHITE
@@ -88,11 +82,10 @@ endchoice
 
 config BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE
 	bool
-	default y if !BR2_GCC_VERSION_4_2_2_AVR32_2_1_5
+	default y
 
 config BR2_GCC_VERSION
 	string
-	default "4.2.2-avr32-2.1.5" if BR2_GCC_VERSION_4_2_2_AVR32_2_1_5
 	default "4.5.4"     if BR2_GCC_VERSION_4_5_X
 	default "4.7.4"     if BR2_GCC_VERSION_4_7_X
 	default "4.8.4"     if BR2_GCC_VERSION_4_8_X
@@ -110,16 +103,11 @@ config BR2_EXTRA_GCC_CONFIG_OPTIONS
 config BR2_TOOLCHAIN_BUILDROOT_CXX
 	bool "Enable C++ support"
 	select BR2_INSTALL_LIBSTDCPP
-	depends on !(BR2_GCC_VERSION_4_2_2_AVR32_2_1_5 && \
-		     BR2_TOOLCHAIN_BUILDROOT_LOCALE)
 	help
 	  Enable this option if you want your toolchain to support the
 	  C++ language and you want C++ libraries to be installed on
 	  your target system.
 
-comment "C++ support broken in uClibc with locale enabled with gcc 4.2"
-	depends on BR2_GCC_VERSION_4_2_2_AVR32_2_1_5 && BR2_TOOLCHAIN_BUILDROOT_LOCALE
-
 config BR2_GCC_ENABLE_TLS
 	bool "Enable compiler tls support" if BR2_TOOLCHAIN_BUILDROOT_UCLIBC
 	default y
@@ -130,7 +118,7 @@ config BR2_GCC_ENABLE_TLS
 
 config BR2_GCC_ENABLE_OPENMP
 	bool "Enable compiler OpenMP support"
-	depends on !BR2_PTHREADS_NONE && !BR2_avr32 && !BR2_arc && !BR2_microblaze
+	depends on !BR2_PTHREADS_NONE && !BR2_arc && !BR2_microblaze
 	help
 	  Enable OpenMP support for the compiler
 
@@ -138,7 +126,7 @@ config BR2_GCC_ENABLE_LIBMUDFLAP
 	bool "Enable libmudflap support"
 	# There are architectures, or specific configurations for
 	# which mudflap is not supported.
-	depends on !BR2_avr32 && !BR2_bfin && !BR2_ARM_INSTRUCTIONS_THUMB && !BR2_powerpc_SPE
+	depends on !BR2_bfin && !BR2_ARM_INSTRUCTIONS_THUMB && !BR2_powerpc_SPE
 	depends on !BR2_GCC_VERSION_4_9_X
 	help
 	  libmudflap is a gcc library used for the mudflap pointer

package/gcc/gcc.mk

@@ -10,9 +10,7 @@
 
 GCC_VERSION = $(call qstrip,$(BR2_GCC_VERSION))
 
-ifeq ($(findstring avr32,$(GCC_VERSION)),avr32)
-GCC_SITE = ftp://www.at91.com/pub/buildroot
-else ifeq ($(BR2_arc),y)
+ifeq ($(BR2_arc),y)
 GCC_SITE = $(call github,foss-for-synopsys-dwc-arc-processors,gcc,$(GCC_VERSION))
 GCC_SOURCE = gcc-$(GCC_VERSION).tar.gz
 else

package/gdb/Config.in

@@ -40,10 +40,10 @@ config BR2_PACKAGE_GDB_DEBUGGER
 	bool "full debugger"
 	select BR2_PACKAGE_NCURSES
 	depends on BR2_USE_WCHAR
-	depends on !BR2_sh && !BR2_sh64 && !BR2_avr32 && !BR2_microblaze && !BR2_bfin
+	depends on !BR2_sh && !BR2_sh64 && !BR2_microblaze && !BR2_bfin
 
 comment "full gdb on target needs a toolchain w/ wchar"
-	depends on !BR2_sh && !BR2_sh64 && !BR2_avr32 && !BR2_microblaze && !BR2_bfin
+	depends on !BR2_sh && !BR2_sh64 && !BR2_microblaze && !BR2_bfin
 	depends on !BR2_USE_WCHAR
 
 if BR2_PACKAGE_GDB_DEBUGGER

package/gdb/Config.in.host

@@ -27,15 +27,10 @@ choice
 	prompt "GDB debugger Version"
 	depends on !BR2_arc
 	depends on !BR2_microblaze
-	default BR2_GDB_VERSION_6_7_1_AVR32_2_1_5 if BR2_avr32
 	default BR2_GDB_VERSION_7_7
 	help
 	  Select the version of gdb you wish to use.
 
-	config BR2_GDB_VERSION_6_7_1_AVR32_2_1_5
-		depends on BR2_avr32
-		bool "gdb 6.7.1-avr32-2.1.5"
-
 	config BR2_GDB_VERSION_7_7
 		bool "gdb 7.7.x"
 
@@ -50,8 +45,6 @@ endif
 config BR2_GDB_VERSION
 	string
 	depends on BR2_PACKAGE_GDB || BR2_PACKAGE_HOST_GDB
-	default "6.7.1-avr32-2.1.5" if BR2_GDB_VERSION_6_7_1_AVR32_2_1_5 || \
-                                   (!BR2_PACKAGE_HOST_GDB && BR2_avr32)
 	default "arc-2014.12-gdb" if BR2_arc
 	default "6be65fb56ea6694a9260733a536a023a1e2d4d57" if BR2_microblaze
 	default "7.7.1"    if BR2_GDB_VERSION_7_7 || !BR2_PACKAGE_HOST_GDB