target/device/Atmel: remove unused legacy u-boot handling

target/device/Atmel/Config.in

@@ -65,8 +65,6 @@ config BR2_BOARD_PATH
 
 endmenu
 
-# source "target/device/Atmel/u-boot/Config.in"
-
 source "target/device/Atmel/DataFlashBoot/Config.in"
 
 source "target/device/Atmel/at91bootstrap/Config.in"

target/device/Atmel/u-boot/Config.in

@@ -1,46 +0,0 @@
-config BR2_TARGET_UBOOT_AT91
-	bool "Das U-Boot Boot Monitor"
-	depends on BR2_TARGET_AT91 && !BR2_TARGET_AT91SAM9G20
-	depends on !BR2_TARGET_AT91SAM9260PF
-	select BR2_TARGET_CUSTOM_UBOOT
-	help
-	  Build "Das U-Boot" Boot Monitor for AT91
-
-if BR2_TARGET_UBOOT_AT91
-config BR2_TARGET_UBOOT_SERVERIP_AT91
-	string "server ip"
-	depends on BR2_TARGET_UBOOT_AT91
-	default "10.175.196.221"
-	help
-	  TFTP server ip address
-
-config BR2_TARGET_UBOOT_IPADDR_AT91
-	string "ip address"
-	depends on BR2_TARGET_UBOOT_AT91
-	default "10.175.196.18"
-	help
-	  Target server ip address
-
-config BR2_TARGET_UBOOT_GATEWAY_AT91
-	string "gateway ip"
-	depends on BR2_TARGET_UBOOT_AT91
-	default "10.175.196.1"
-	help
-	  Gateway ip address
-
-config BR2_TARGET_UBOOT_NETMASK_AT91
-	string "netmask"
-	depends on BR2_TARGET_UBOOT_AT91
-	default "255.255.255.0"
-	help
-	  Network Mask
-
-config BR2_TARGET_UBOOT_ETHADDR_AT91
-	string "Ethernet address"
-	depends on BR2_TARGET_UBOOT_AT91
-	default "04:25:fe:ed:00:18"
-	help
-	  Target ip address, this should be changed for production units
-
-endif
-

target/device/Atmel/u-boot/u-boot.mk

@@ -1,282 +0,0 @@
-#############################################################
-#
-# u-boot mkimage to build to target u-boot filesystems and
-#
-# u-boot.bin - the boot loader for the target - which needs soft float, so
-# we won't make it.
-#
-#
-#############################################################
-UBOOT_VERSION:=1.2.0-atmel
-ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
-#"))
-UBOOT_DIR:=$(BUILD_DIR)/u-boot-$(UBOOT_VERSION)
-UBOOT_BUILD_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(UBOOT_VERSION)
-UBOOT_SOURCE:=u-boot-$(UBOOT_VERSION).tar.bz2
-#UBOOT_SOURCE:=u-boot-1.1.5-atmel.tar.bz2
-#UBOOT_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/u-boot
-UBOOT_SITE:=$(ATMEL_MIRROR)
-UBOOT_PATCH_SITE:=$(ATMEL_MIRROR)
-UBOOT_CAT:=$(BZCAT)
-UBOOT_PATCH_SOURCE:=u-boot-1.2.0-atmel-patch.tar.bz2
-
-MKIMAGE_BINLOC:=$(UBOOT_BUILD_DIR)/tools/mkimage
-MKIMAGE:=$(KERNEL_CROSS)mkimage
-
-UBOOT_BIN:=$(BOARD_NAME)-u-boot-$(UBOOT_VERSION)-$(DATE).bin
-
-UBOOT_PATCHES:=$(PROJECT_BUILD_DIR)/u-boot-patches
-
-UBOOT_ATMEL_BMP:=$(UBOOT_PATCHES)/atmel.bmp
-
-UBOOT_SCR=$(BINARIES_DIR)/autoscript
-TARGET_UBOOT_IPADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_IPADDR_AT91)))
-#"))
-TARGET_UBOOT_SERVERIP:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_SERVERIP_AT91)))
-#"))
-TARGET_UBOOT_GATEWAY:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_GATEWAY_AT91)))
-#"))
-TARGET_UBOOT_NETMASK:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_NETMASK_AT91)))
-#"))
-TARGET_UBOOT_ETHADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_ETHADDR_AT91)))
-#"))
-UBOOT_CUSTOM:=$(UBOOT_DIR)/include/custom.h
-
-$(DL_DIR)/$(UBOOT_SOURCE):
-	$(call DOWNLOAD,$(UBOOT_SITE),$(UBOOT_SOURCE))
-
-$(DL_DIR)/$(UBOOT_PATCH_SOURCE):
-	$(call DOWNLOAD,$(UBOOT_PATCH_SITE),$(UBOOT_PATCH_SOURCE))
-
-$(UBOOT_DIR)/.unpacked: $(DL_DIR)/$(UBOOT_SOURCE)
-	mkdir -p $(BUILD_DIR)
-	$(UBOOT_CAT) $(DL_DIR)/$(UBOOT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-	touch $@
-
-$(UBOOT_PATCHES)/.unpacked: $(DL_DIR)/$(UBOOT_PATCH_SOURCE)
-	mkdir -p $(UBOOT_PATCHES)
-	bzcat $(DL_DIR)/$(UBOOT_PATCH_SOURCE) | tar -C $(UBOOT_PATCHES) -xvf -
-	touch $@
-
-$(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE): $(UBOOT_DIR)/.unpacked $(UBOOT_PATCHES)/.unpacked
-	toolchain/patch-kernel.sh $(UBOOT_DIR) $(UBOOT_PATCHES) \*.patch
-	touch $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
-# cp $(UBOOT_CONFIG_FILE) $(UBOOT_DIR)/include/configs/.
-# cp $(UBOOT_PATCHES)/cmd_defenv.c $(UBOOT_DIR)/common/.
-# cp $(UBOOT_ATMEL_BMP) $(UBOOT_DIR)/tools/logos/.
-
-$(UBOOT_BUILD_DIR)/.configured: $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
-ifneq ($(strip $(UBOOT_CONFIG_FILE)),)
-	cp $(UBOOT_CONFIG_FILE) $(UBOOT_DIR)/include/configs/.
-endif
-	$(MAKE) \
-		O=$(UBOOT_BUILD_DIR) \
-		CONFIG_NOSOFTFLOAT=1 \
-		-C $(UBOOT_DIR) \
-		$(UBOOT_CONFIG)
-	$(SED) 's/ $$(SREC) $$(BIN)//' $(UBOOT_DIR)/examples/Makefile
-	touch $(UBOOT_BUILD_DIR)/.configured
-# $(MAKE) O=$(UBOOT_BUILD_DIR) -C $(UBOOT_DIR)
-
-$(MKIMAGE_BINLOC): $(UBOOT_BUILD_DIR)/.configured
-	$(MAKE) \
-		O=$(UBOOT_BUILD_DIR) \
-		CROSS_COMPILE= \
-		CONFIG_NOSOFTFLOAT=1 \
-		TOPDIR=$(UBOOT_DIR) \
-		SRCTREE=$(UBOOT_DIR) \
-		-C $(UBOOT_DIR) tools
-	touch $(MKIMAGE_BINLOC)
-
-$(UBOOT_BUILD_DIR)/u-boot.bin: $(UBOOT_BUILD_DIR)/.configured $(UBOOT_CUSTOM)
-	echo TARGET_CROSS=$(TARGET_CROSS)
-	$(MAKE) O=$(UBOOT_BUILD_DIR) \
-		CROSS_COMPILE=$(TARGET_CROSS) \
-		CONFIG_NOSOFTFLOAT=1 \
-		TOPDIR=$(UBOOT_DIR) \
-		SRCTREE=$(UBOOT_DIR) \
-		TFTPBOOT=$(TARGET_ATMEL_COPYTO) \
-		-C $(UBOOT_DIR)
-
-$(BINARIES_DIR)/$(UBOOT_BIN): $(UBOOT_BUILD_DIR)/u-boot.bin
-	mkdir -p $(BINARIES_DIR)
-	cp $(UBOOT_BUILD_DIR)/u-boot.bin $(BINARIES_DIR)/$(UBOOT_BIN)
-
-$(TARGET_ATMEL_COPYTO)/$(UBOOT_BIN): $(UBOOT_BUILD_DIR)/u-boot.bin
-	mkdir -p $(TARGET_ATMEL_COPYTO)
-	cp $(UBOOT_BUILD_DIR)/u-boot.bin $(TARGET_ATMEL_COPYTO)/$(UBOOT_BIN)
-
-uboot-bin: $(BINARIES_DIR)/$(UBOOT_BIN) $(TARGET_ATMEL_COPYTO)/$(UBOOT_BIN)
-
-$(UBOOT_CUSTOM).test: .config $(UBOOT_BUILD_DIR)/.configured
-	echo "/* Automatically generated file, do not edit */" \
-	> $(UBOOT_CUSTOM).test
-ifneq ($(TARGET_HOSTNAME),)
-	echo "#if defined(CONFIG_HOSTNAME)" >> $(UBOOT_CUSTOM).test
-	echo "#undef CONFIG_HOSTNAME" >> $(UBOOT_CUSTOM).test
-	echo "#define CONFIG_HOSTNAME $(TARGET_HOSTNAME)">> $(UBOOT_CUSTOM).test
-	echo "#endif" >> $(UBOOT_CUSTOM).test
-endif
-ifneq ($(TARGET_UBOOT_IPADDR),)
-	echo "#define CONFIG_IPADDR $(TARGET_UBOOT_IPADDR)">> $(UBOOT_CUSTOM).test
-endif
-ifneq ($(TARGET_UBOOT_SERVERIP),)
-	echo "#define CONFIG_SERVERIP $(TARGET_UBOOT_SERVERIP)">> $(UBOOT_CUSTOM).test
-endif
-ifneq ($(TARGET_UBOOT_GATEWAY),)
-	echo "#define CONFIG_GATEWAYIP $(TARGET_UBOOT_GATEWAY)">> $(UBOOT_CUSTOM).test
-endif
-ifneq ($(TARGET_UBOOT_NETMASK),)
-	echo "#define CONFIG_NETMASK $(TARGET_UBOOT_NETMASK)">> $(UBOOT_CUSTOM).test
-endif
-ifneq ($(TARGET_UBOOT_ETHADDR),)
-	echo "#define CONFIG_ETHADDR $(TARGET_UBOOT_ETHADDR)">> $(UBOOT_CUSTOM).test
-endif
-	diff -q $(UBOOT_CUSTOM).test $(UBOOT_CUSTOM) || cp -af $(UBOOT_CUSTOM).test $(UBOOT_CUSTOM)
-
-$(UBOOT_SCR): .config
-ifneq ($(TARGET_UBOOT_IPADDR),)
-	echo setenv ipaddr $(TARGET_UBOOT_IPADDR) > $(UBOOT_SCR)
-endif
-ifneq ($(TARGET_UBOOT_SERVERIP),)
-	echo setenv serverip $(TARGET_UBOOT_SERVERIP) >> $(UBOOT_SCR)
-endif
-ifneq ($(TARGET_UBOOT_GATEWAY),)
-	echo setenv gatewayip $(TARGET_UBOOT_GATEWAY) >> $(UBOOT_SCR)
-endif
-ifneq ($(TARGET_UBOOT_NETMASK),)
-	echo setenv netmask $(TARGET_UBOOT_NETMASK) >> $(UBOOT_SCR)
-endif
-	echo setenv linux $(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE).gz >> $(UBOOT_SCR)
-	echo setenv kernel-version $(LINUX26_VERSION) >> $(UBOOT_SCR)
-	echo setenv kernel-date $(DATE) >> $(UBOOT_SCR)
-	echo setenv hostname $(TARGET_HOSTNAME) >> $(UBOOT_SCR)
-	echo setenv fs-date $(DATE) >> $(UBOOT_SCR)
-	echo setenv rd-1 rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(UBOOT_SCR)
-	echo setenv rd-2 rootfs.$(BR2_ARCH)-$(DATE).jffs2 >> $(UBOOT_SCR)
-	echo setenv rd rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(UBOOT_SCR)
-	echo setenv ver 1 >> $(UBOOT_SCR)
-ifneq ($(TARGET_UBOOT_ETHADDR),)
-	echo setenv ethaddr $(TARGET_UBOOT_ETHADDR) >> $(UBOOT_SCR)
-endif
-	echo setenv fstype ram >> $(UBOOT_SCR)
-	echo fs >> $(UBOOT_SCR)
-	echo os >> $(UBOOT_SCR)
-	echo setargs >> $(UBOOT_SCR)
-	echo saveenv >> $(UBOOT_SCR)
-
-$(UBOOT_SCR).$(PROJECT): $(UBOOT_SCR) $(MKIMAGE)
-	$(MKIMAGE) -A arm \
-				-O linux \
-				-T script \
-				-C none \
-				-a 0 \
-				-e 0 \
-				-n "autoscr config" \
-				-d $(UBOOT_SCR) \
-				$(UBOOT_SCR).$(PROJECT)
-	cp $(UBOOT_SCR).$(PROJECT) $(TARGET_ATMEL_COPYTO)
-
-$(MKIMAGE): $(MKIMAGE_BINLOC)
-	cp -f $(MKIMAGE_BINLOC) $(MKIMAGE)
-
-uboot: $(MKIMAGE) uboot-bin $(UBOOT_SCR).$(PROJECT)
-
-uboot-source: $(DL_DIR)/$(UBOOT_SOURCE)
-
-uboot-clean:
-	rm -fr $(UBOOT_BUILD_DIR)
-	rm -fr $(UBOOT_PATCHES)
-	rm -f $(BINARIES_DIR)/$(UBOOT_BIN)
-	rm -fr $(UBOOT_DIR)
-	rm -f $(UBOOT_SCR)
-	rm -f $(UBOOT_SCR).$(PROJECT)
-# -$(MAKE) -C $(UBOOT_DIR)/uboot-tools clean
-
-uboot-dirclean: uboot-clean
-	rm -rf $(UBOOT_DIR)
-
-uboot-new:
-	rm -fr $(UBOOT_BUILD_DIR)/u-boot
-	rm -fr $(UBOOT_BUILD_DIR)/u-boot.gz
-	rm -fr $(UBOOT_BUILD_DIR)/u-boot.bin
-	rm -fr $(TARGET_ATMEL_COPYTO)/$(UBOOT_BIN)
-	rm -fr $(BINARIES_DIR)/$(UBOOT_BIN)
-
-.PHONY: uboot-bin
-#############################################################
-#
-# Build the uboot root filesystem image
-#
-#############################################################
-
-UBOOT_TARGET:=$(IMAGE).uboot
-
-ubootroot: host-fakeroot makedevs uboot
-	-@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIPCMD) 2>/dev/null || true
-	@rm -rf $(TARGET_DIR)/usr/man
-	@rm -rf $(TARGET_DIR)/usr/info
-	-/sbin/ldconfig -r $(TARGET_DIR) 2>/dev/null
-	# Use fakeroot to pretend all target binaries are owned by root
-	rm -f $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
-	touch $(STAGING_DIR)/.fakeroot.00000
-	cat $(STAGING_DIR)/.fakeroot* > $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
-	echo "chown -R root:root $(TARGET_DIR)" >> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
-	# Use fakeroot to pretend to create all needed device nodes
-	echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
-		>> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
-	# Use fakeroot so mkuboot believes the previous fakery
-	echo "$(UBOOT_DIR)/uboot-tools/mkuboot " \
-		    "$(TARGET_DIR) $(UBOOT_TARGET) " \
-		    "-noappend $(UBOOT_ENDIANNESS)" \
-		>> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
-	chmod a+x $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
-	$(HOST_DIR)/usr/bin/fakeroot -- $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
-	-@rm -f $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
-
-ubootroot-source: uboot-source
-
-ubootroot-clean:
-	-$(MAKE) -C $(UBOOT_DIR) clean
-
-ubootroot-dirclean:
-	rm -rf $(UBOOT_DIR)
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_UBOOT_AT91),y)
-TARGETS+=uboot
-endif
-
-uboot-test:
-	-@echo source=$(DL_DIR)/$(UBOOT_SOURCE)
-	-@ls $(DL_DIR)/$(UBOOT_SOURCE)
-	-@echo patch=$(DL_DIR)/$(UBOOT_PATCH_SOURCE)
-	-@ls $(DL_DIR)/$(UBOOT_PATCH_SOURCE)
-	-@echo unpacked=$(UBOOT_PATCHES)/.unpacked
-	-@ls $(UBOOT_PATCHES)/.unpacked
-	-@echo patch-unpacked=$(UBOOT_PATCHES)/.unpacked
-	-@ls $(UBOOT_PATCHES)/.unpacked
-	-@echo patched-source=$(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
-	-@ls $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
-	-@echo configured=$(UBOOT_BUILD_DIR)/.configured
-	-@ls $(UBOOT_BUILD_DIR)/.configured
-	-@echo mkimage=$(MKIMAGE_BINLOC)
-	-@ls $(MKIMAGE_BINLOC)
-	-@echo u-boot.bin=$(UBOOT_BUILD_DIR)/u-boot.bin
-	-@ls $(UBOOT_BUILD_DIR)/u-boot.bin
-	-@echo binaries-u-boot.bin=$(BINARIES_DIR)/$(UBOOT_BIN)
-	-@ls $(BINARIES_DIR)/$(UBOOT_BIN)
-	-@echo tftpboot=$(TARGET_ATMEL_COPYTO)/$(UBOOT_BIN)
-	-@ls $(TARGET_ATMEL_COPYTO)/$(UBOOT_BIN)
-	-@echo "mkimage = $(MKIMAGE)"
-	-@ls $(MKIMAGE)
-	-@echo "u-boot script=$(UBOOT_SCR).$(PROJECT)"
-	-@ls $(UBOOT_SCR).$(PROJECT)
-	-@echo "u-boot script (ASCII)=$(UBOOT_SCR)"
-	-@ls $(UBOOT_SCR)
-	-@echo "mkimage binary=$(MKIMAGE_BINLOC)"
-	-@ls $(MKIMAGE_BINLOC)