target/device/AMD: remove

It hasn't been touched in years, and Config.in refers to non-existing
files (linux.mk), so there cannot be many users.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target/device/AMD/Config.in

@@ -1,25 +0,0 @@
-menuconfig BR2_TARGET_AMD
-	bool "AMD Specific Device Support"
-
-if BR2_TARGET_AMD
-
-comment "AMD Specific Device Support"
-	depends on BR2_mipsel || BR2_mips
-
-config BR2_TARGET_AMD_ALCHEMY
-	bool "Board support for the AMD development boards"
-	depends on BR2_mipsel || BR2_mips
-	help
-	  AMD Alchemy mips based systems
-
-config BR2_TARGET_AMD_ALCHEMY_DBAU1500
-	bool "AMD Alchemy DBAu1500 Development Board Support"
-	depends on BR2_TARGET_AMD_ALCHEMY
-	select BR2_PACKAGE_LINUX
-	help
-	  The AMD Alchemy DBAu1500 Development Board
-
-comment "Package support"
-	depends on BR2_TARGET_AMD_ALCHEMY
-
-endif

target/device/AMD/DBAu1500/Makefile.in

@@ -1,22 +0,0 @@
-# ALCHEMY_DBAU1500_PATH=target/device/AMD/DBAu1500
-BOARD_PATH:=target/device/AMD/DBAu1500
-BR2_PACKAGE_BUSYBOX_CONFIG=$(BOARD_PATH)/busybox.config
-UCLIBC_CONFIG_FILE=$(TOOL_BUILD_DIR)/uClibc.config.$(ARCH)
-
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
-
-TARGETS+=linux
-
-$(UCLIBC_DIR)/.xprep::
-	cp toolchain/uClibc/uClibc-$(UCLIBC_VER).config $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_MIPS_ISA_1 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_MIPS_ISA_2 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_MIPS_ISA_3 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_MIPS_ISA_4 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "CONFIG_MIPS_ISA_MIPS32=y" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_MIPS_ISA_MIPS64 is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "CONFIG_MIPS_O32_ABI=y" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_MIPS_N32_ABI is not set" >> $(UCLIBC_CONFIG_FILE)
-	/bin/echo "# CONFIG_MIPS_N64_ABI is not set" >> $(UCLIBC_CONFIG_FILE)
-

target/device/AMD/DBAu1500/busybox.config

@@ -1,483 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-HAVE_DOT_CONFIG=y
-
-#
-# General Configuration
-#
-# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
-CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-# CONFIG_FEATURE_DEVFS is not set
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-CONFIG_FEATURE_SUID=y
-# CONFIG_FEATURE_SUID_CONFIG is not set
-# CONFIG_SELINUX is not set
-
-#
-# Build Options
-#
-# CONFIG_STATIC is not set
-CONFIG_LFS=y
-# USING_CROSS_COMPILER is not set
-EXTRA_CFLAGS_OPTIONS=""
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-PREFIX="./_install"
-
-#
-# Archival Utilities
-#
-# CONFIG_AR is not set
-CONFIG_BUNZIP2=y
-# CONFIG_CPIO is not set
-# CONFIG_DPKG is not set
-# CONFIG_DPKG_DEB is not set
-CONFIG_GUNZIP=y
-# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
-CONFIG_GZIP=y
-# CONFIG_RPM2CPIO is not set
-# CONFIG_RPM is not set
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-# CONFIG_FEATURE_TAR_FROM is not set
-CONFIG_FEATURE_TAR_GZIP=y
-# CONFIG_FEATURE_TAR_COMPRESS is not set
-# CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY is not set
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
-# CONFIG_UNCOMPRESS is not set
-CONFIG_UNZIP=y
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-# CONFIG_CAL is not set
-CONFIG_CAT=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-CONFIG_CMP=y
-# CONFIG_COMM is not set
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-CONFIG_DD=y
-CONFIG_DF=y
-CONFIG_DIRNAME=y
-CONFIG_DOS2UNIX=y
-CONFIG_UNIX2DOS=y
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-# CONFIG_PRINTENV is not set
-CONFIG_EXPR=y
-CONFIG_FALSE=y
-# CONFIG_FOLD is not set
-CONFIG_HEAD=y
-# CONFIG_FEATURE_FANCY_HEAD is not set
-CONFIG_HOSTID=y
-CONFIG_ID=y
-CONFIG_INSTALL=y
-# CONFIG_LENGTH is not set
-CONFIG_LN=y
-CONFIG_LOGNAME=y
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-# CONFIG_MKFIFO is not set
-CONFIG_MKNOD=y
-CONFIG_MV=y
-# CONFIG_NICE is not set
-# CONFIG_OD is not set
-# CONFIG_PRINTF is not set
-CONFIG_PWD=y
-# CONFIG_REALPATH is not set
-CONFIG_RM=y
-CONFIG_RMDIR=y
-# CONFIG_SEQ is not set
-CONFIG_SHA1SUM=y
-CONFIG_SLEEP=y
-# CONFIG_FEATURE_FANCY_SLEEP is not set
-CONFIG_SORT=y
-CONFIG_SORT_BIG=y
-# CONFIG_STAT is not set
-CONFIG_STTY=y
-# CONFIG_SUM is not set
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TEST=y
-
-#
-# test (forced enabled for use with shell)
-#
-CONFIG_FEATURE_TEST_64=y
-CONFIG_TOUCH=y
-# CONFIG_TR is not set
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-CONFIG_UUDECODE=y
-CONFIG_UUENCODE=y
-# CONFIG_WATCH is not set
-CONFIG_WC=y
-# CONFIG_WHO is not set
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls and more
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-# CONFIG_DUMPKMAP is not set
-# CONFIG_LOADFONT is not set
-# CONFIG_LOADKMAP is not set
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-# CONFIG_SETKEYCODES is not set
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-CONFIG_READLINK=y
-CONFIG_FEATURE_READLINK_FOLLOW=y
-CONFIG_RUN_PARTS=y
-CONFIG_START_STOP_DAEMON=y
-CONFIG_WHICH=y
-
-#
-# Linux Ext2 FS Progs
-#
-# CONFIG_CHATTR is not set
-# CONFIG_LSATTR is not set
-
-#
-# Editors
-#
-# CONFIG_AWK is not set
-# CONFIG_PATCH is not set
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_MTIME=y
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-# CONFIG_FEATURE_FIND_NEWER is not set
-# CONFIG_FEATURE_FIND_INUM is not set
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_INITRD=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-CONFIG_FEATURE_EXTRA_QUIET=y
-CONFIG_HALT=y
-CONFIG_POWEROFF=y
-CONFIG_REBOOT=y
-# CONFIG_MESG is not set
-
-#
-# Login/Password Management Utilities
-#
-# CONFIG_USE_BB_PWD_GRP is not set
-CONFIG_ADDGROUP=y
-CONFIG_DELGROUP=y
-CONFIG_ADDUSER=y
-CONFIG_DELUSER=y
-CONFIG_GETTY=y
-# CONFIG_FEATURE_U_W_TMP is not set
-CONFIG_LOGIN=y
-CONFIG_FEATURE_SECURETTY=y
-CONFIG_PASSWD=y
-CONFIG_SU=y
-CONFIG_SULOGIN=y
-CONFIG_VLOCK=y
-
-#
-# Common options for adduser, deluser, login, su
-#
-CONFIG_FEATURE_SHADOWPASSWDS=y
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-# CONFIG_CROND is not set
-# CONFIG_CRONTAB is not set
-CONFIG_DC=y
-# CONFIG_DEVFSD is not set
-# CONFIG_EJECT is not set
-# CONFIG_LAST is not set
-# CONFIG_HDPARM is not set
-# CONFIG_MAKEDEVS is not set
-CONFIG_MT=y
-# CONFIG_RX is not set
-CONFIG_STRINGS=y
-CONFIG_TIME=y
-# CONFIG_WATCHDOG is not set
-
-#
-# Linux Module Utilities
-#
-CONFIG_INSMOD=y
-CONFIG_FEATURE_2_4_MODULES=y
-# CONFIG_FEATURE_2_6_MODULES is not set
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
-CONFIG_LSMOD=y
-CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-CONFIG_FEATURE_QUERY_MODULE_INTERFACE=y
-CONFIG_MODPROBE=y
-CONFIG_RMMOD=y
-CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-
-#
-# Networking Utilities
-#
-# CONFIG_FEATURE_IPV6 is not set
-# CONFIG_ARPING is not set
-# CONFIG_ETHER_WAKE is not set
-# CONFIG_FAKEIDENTD is not set
-# CONFIG_FTPGET is not set
-# CONFIG_FTPPUT is not set
-CONFIG_HOSTNAME=y
-# CONFIG_HTTPD is not set
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-# CONFIG_FEATURE_IFCONFIG_HW is not set
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-CONFIG_IFUPDOWN=y
-# CONFIG_FEATURE_IFUPDOWN_IP is not set
-CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
-CONFIG_FEATURE_IFUPDOWN_IPV4=y
-# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set
-# CONFIG_FEATURE_IFUPDOWN_IPX is not set
-# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
-# CONFIG_INETD is not set
-# CONFIG_IP is not set
-# CONFIG_IPCALC is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_NAMEIF is not set
-# CONFIG_NC is not set
-CONFIG_NETSTAT=y
-CONFIG_NSLOOKUP=y
-CONFIG_PING=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_ROUTE=y
-CONFIG_TELNET=y
-CONFIG_FEATURE_TELNET_TTYPE=y
-# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set
-# CONFIG_TELNETD is not set
-# CONFIG_TFTP is not set
-# CONFIG_TRACEROUTE is not set
-# CONFIG_VCONFIG is not set
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_IP6_LITERAL is not set
-
-#
-# udhcp Server/Client
-#
-CONFIG_UDHCPD=y
-CONFIG_UDHCPC=y
-CONFIG_DUMPLEASES=y
-CONFIG_FEATURE_UDHCP_SYSLOG=y
-# CONFIG_FEATURE_UDHCP_DEBUG is not set
-# CONFIG_ZCIP is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_PIDOF=y
-CONFIG_PS=y
-# CONFIG_RENICE is not set
-# CONFIG_TOP is not set
-CONFIG_UPTIME=y
-# CONFIG_SYSCTL is not set
-
-#
-# Another Bourne-like Shell
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-# CONFIG_ASH_TIMEOUT is not set
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-CONFIG_ASH_MATH_SUPPORT_64=y
-# CONFIG_ASH_GETOPTS is not set
-# CONFIG_ASH_CMDCMD is not set
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-# CONFIG_HUSH is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
-CONFIG_FEATURE_COMMAND_EDITING=y
-CONFIG_FEATURE_COMMAND_HISTORY=15
-CONFIG_FEATURE_COMMAND_SAVEHISTORY=y
-CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
-# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_SH_FANCY_PROMPT=y
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-# CONFIG_FEATURE_REMOTE_LOG is not set
-# CONFIG_FEATURE_IPC_SYSLOG is not set
-CONFIG_KLOGD=y
-CONFIG_LOGGER=y
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-# CONFIG_FBSET is not set
-# CONFIG_FDFLUSH is not set
-CONFIG_FDFORMAT=y
-CONFIG_FDISK=y
-FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_FEATURE_AIX_LABEL is not set
-# CONFIG_FEATURE_SGI_LABEL is not set
-# CONFIG_FEATURE_SUN_LABEL is not set
-# CONFIG_FEATURE_OSF_LABEL is not set
-# CONFIG_FEATURE_FDISK_ADVANCED is not set
-# CONFIG_FREERAMDISK is not set
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-CONFIG_GETOPT=y
-CONFIG_HEXDUMP=y
-CONFIG_HWCLOCK=y
-CONFIG_FEATURE_HWCLOCK_LONGOPTIONS=y
-# CONFIG_LOSETUP is not set
-# CONFIG_MKSWAP is not set
-CONFIG_MORE=y
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_PIVOT_ROOT=y
-CONFIG_RDATE=y
-CONFIG_SWAPONOFF=y
-CONFIG_MOUNT=y
-# CONFIG_NFSMOUNT is not set
-CONFIG_UMOUNT=y
-# CONFIG_FEATURE_MOUNT_FORCE is not set
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-# CONFIG_FEATURE_MTAB_SUPPORT is not set
-# CONFIG_READPROFILE is not set
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set

target/device/AMD/DBAu1500/device_table.txt

@@ -1,162 +0,0 @@
-# When building a target filesystem, it is desirable to not have to
-# become root and then run 'mknod' a thousand times.  Using a device 
-# table you can create device nodes and directories "on the fly".
-#
-# This is a sample device table file for use with genext2fs.  You can
-# do all sorts of interesting things with a device table file.  For
-# example, if you want to adjust the permissions on a particular file
-# you can just add an entry like:
-#   /sbin/foobar        f       2755    0       0       -       -       -       -       -
-# and (assuming the file /sbin/foobar exists) it will be made setuid
-# root (regardless of what its permissions are on the host filesystem.
-# Furthermore, you can use a single table entry to create a many device
-# minors.  For example, if I wanted to create /dev/hda and /dev/hda[0-15]
-# I could just use the following two table entries:
-#   /dev/hda    b       640     0       0       3       0       0       0       -
-#   /dev/hda    b       640     0       0       3       1       1       1       15
-# 
-# Device table entries take the form of:
-# <name>    <type>      <mode>  <uid>   <gid>   <major> <minor> <start> <inc>   <count>
-# where name is the file name,  type can be one of: 
-#       f       A regular file
-#       d       Directory
-#       c       Character special device file
-#       b       Block special device file
-#       p       Fifo (named pipe)
-# uid is the user id for the target file, gid is the group id for the
-# target file.  The rest of the entries (major, minor, etc) apply only 
-# to device special files.
-
-# Have fun
-# -Erik Andersen <andersen@codepoet.org>
-#
-
-#<name>		<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
-/dev		d	755	0	0	-	-	-	-	-
-/dev/pts	d	755	0	0	-	-	-	-	-
-/tmp		d	1777	0	0	-	-	-	-	-
-/etc		d	755	0	0	-	-	-	-	-
-/home/default	d	2755	1000	1000	-	-	-	-	-
-#<name>					<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
-/bin/busybox				f	4755	0	0	-	-	-	-	-
-/etc/shadow				f	600	0	0	-	-	-	-	-
-/etc/passwd				f	644	0	0	-	-	-	-	-
-/etc/network/if-up.d			d	755	0	0	-	-	-	-	-
-/etc/network/if-pre-up.d		d	755	0	0	-	-	-	-	-
-/etc/network/if-down.d			d	755	0	0	-	-	-	-	-
-/etc/network/if-post-down.d		d	755	0	0	-	-	-	-	-
-/usr/share/udhcpc/default.script	f	755	0	0	-	-	-	-	-
-# uncomment this to allow starting x as non-root
-#/usr/X11R6/bin/Xfbdev		f	4755	0	0	-	-	-	-	-
-# Normal system devices
-/dev/mem	c	640	0	0	1	1	0	0	-
-/dev/kmem	c	640	0	0	1	2	0	0	-
-/dev/null	c	666	0	0	1	3	0	0	-
-/dev/zero	c	666	0	0	1	5	0	0	-
-/dev/random	c	666	0	0	1	8	0	0	-
-/dev/urandom	c	666	0	0	1	9	0	0	-
-/dev/ram	b	640	0	0	1	1	0	0	-
-/dev/ram	b	640	0	0	1	0	0	1	4
-/dev/loop	b	640	0	0	7	0	0	1	2
-/dev/rtc	c	640	0	0	10	135	-	-	-
-/dev/console	c	666	0	0	5	1	-	-	-
-/dev/tty	c	666	0	0	5	0	-	-	-
-/dev/tty	c	666	0	0	4	0	0	1	8
-/dev/ttyp	c	666	0	0	3	0	0	1	10
-/dev/ptyp	c       666     0       0       2       0       0       1       10
-/dev/ptmx	c	666	0	0	5	2	-	-	-
-/dev/ttyP	c	666	0	0	57	0	0	1	4
-/dev/ttyS	c	666	0	0	4	64	0	1	4
-/dev/fb		c	640	0	5	29	0	0	32	4
-#/dev/ttySA	c	666	0	0	204	5	0	1	3
-/dev/psaux	c	666	0	0	10	1	0	0	-
-#/dev/ppp	c	666	0	0	108	0	-	-	-
-
-# MTD stuff
-/dev/mtd	c	640	0	0	90	0	0	2	4
-/dev/mtdblock	b	640	0	0	31	0	0	1	4
-
-#Tun/tap driver
-/dev/net	d	755	0	0	-	-	-	-	-
-/dev/net/tun	c	660	0	0	10	200	-	-	-
-
-# Audio stuff
-#/dev/audio	c	666	0	29	14	4	-	-	-
-#/dev/audio1	c	666	0	29	14	20	-	-	-
-#/dev/dsp	c	666	0	29	14	3	-	-	-
-#/dev/dsp1	c	666	0	29	14	19	-	-	-
-#/dev/sndstat	c	666	0	29	14	6	-	-	-
-
-# User-mode Linux stuff
-/dev/ubda	b	640	0	0	98	0	0	0	-
-/dev/ubda	b	640	0	0	98	1	1	1	15
-
-# IDE Devices
-/dev/hda	b	640	0	0	3	0	0	0	-
-/dev/hda	b	640	0	0	3	1	1	1	15
-/dev/hdb	b	640	0	0	3	64	0	0	-
-/dev/hdb	b	640	0	0	3	65	1	1	15
-#/dev/hdc	b	640	0	0	22	0	0	0	-
-#/dev/hdc	b	640	0	0	22	1	1	1	15
-#/dev/hdd	b	640	0	0	22	64	0	0	-
-#/dev/hdd	b	640	0	0	22	65	1	1	15
-#/dev/hde	b	640	0	0	33	0	0	0	-
-#/dev/hde	b	640	0	0	33	1	1	1	15
-#/dev/hdf	b	640	0	0	33	64	0	0	-
-#/dev/hdf	b	640	0	0	33	65	1	1	15
-#/dev/hdg	b	640	0	0	34	0	0	0	-
-#/dev/hdg	b	640	0	0	34	1	1	1	15
-#/dev/hdh	b	640	0	0	34	64	0	0	-
-#/dev/hdh	b	640	0	0	34	65	1	1	15
-
-# SCSI Devices
-#/dev/sda	b	640	0	0	8	0	0	0	-
-#/dev/sda	b	640	0	0	8	1	1	1	15
-#/dev/sdb	b	640	0	0	8	16	0	0	-
-#/dev/sdb	b	640	0	0	8	17	1	1	15
-#/dev/sdc	b	640	0	0	8	32	0	0	-
-#/dev/sdc	b	640	0	0	8	33	1	1	15
-#/dev/sdd	b	640	0	0	8	48	0	0	-
-#/dev/sdd	b	640	0	0	8	49	1	1	15
-#/dev/sde	b	640	0	0	8	64	0	0	-
-#/dev/sde	b	640	0	0	8	65	1	1	15
-#/dev/sdf	b	640	0	0	8	80	0	0	-
-#/dev/sdf	b	640	0	0	8	81	1	1	15
-#/dev/sdg	b	640	0	0	8	96	0	0	-
-#/dev/sdg	b	640	0	0	8	97	1	1	15
-#/dev/sdh	b	640	0	0	8	112	0	0	-
-#/dev/sdh	b	640	0	0	8	113	1	1	15
-#/dev/sg	c	640	0	0	21	0	0	1	15
-#/dev/scd	b	640	0	0	11	0	0	1	15
-#/dev/st	c	640	0	0	9	0	0	1	8
-#/dev/nst	c	640	0	0	9	128	0	1	8
-#/dev/st	c	640	0	0	9	32	1	1	4
-#/dev/st	c	640	0	0	9	64	1	1	4
-#/dev/st	c	640	0	0	9	96	1	1	4
-
-# Floppy disk devices
-#/dev/fd	b	640	0	0	2	0	0	1	2
-#/dev/fd0d360	b	640	0	0	2	4	0	0	-
-#/dev/fd1d360	b	640	0	0	2	5	0	0	-
-#/dev/fd0h1200	b	640	0	0	2	8	0	0	-
-#/dev/fd1h1200	b	640	0	0	2	9	0	0	-
-#/dev/fd0u1440	b	640	0	0	2	28	0	0	-
-#/dev/fd1u1440	b	640	0	0	2	29	0	0	-
-#/dev/fd0u2880	b	640	0	0	2	32	0	0	-
-#/dev/fd1u2880	b	640	0	0	2	33	0	0	-
-
-# All the proprietary cdrom devices in the world
-#/dev/aztcd	b	640	0	0	29	0	0	0	-
-#/dev/bpcd	b	640	0	0	41	0	0	0	-
-#/dev/capi20	c	640	0	0	68	0	0	1	2
-#/dev/cdu31a	b	640	0	0	15	0	0	0	-
-#/dev/cdu535	b	640	0	0	24	0	0	0	-
-#/dev/cm206cd	b	640	0	0	32	0	0	0	-
-#/dev/sjcd	b	640	0	0	18	0	0	0	-
-#/dev/sonycd	b	640	0	0	15	0	0	0	-
-#/dev/gscd	b	640	0	0	16	0	0	0	-
-#/dev/sbpcd	b	640	0	0	25	0	0	0	-
-#/dev/sbpcd	b	640	0	0	25	0	0	1	4
-#/dev/mcd	b	640	0	0	23	0	0	0	-
-#/dev/optcd	b	640	0	0	17	0	0	0	-
-

target/device/AMD/DBAu1500/linux.config

@@ -1,1050 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.4-erik
-# Tue Apr 11 21:14:49 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-CONFIG_MIPS_DB1500=y
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1500=y
-CONFIG_SOC_AU1X00=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
-CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_CPU_ADVANCED is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=y
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_AU1X00=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AU1X00 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp"
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y

target/device/AMD/DBAu1500/linux26.mk

@@ -1,109 +0,0 @@
-#############################################################
-#
-# Linux kernel 2.6 target
-#
-#############################################################
-ifneq ($(filter $(TARGETS),linux26),)
-
-
-# Version of Linux to download and then apply patches to
-DOWNLOAD_LINUX26_VERSION=2.6.19.1
-# Version of Linux after applying any patches
-LINUX26_VERSION=2.6.19.1
-
-
-
-LINUX26_SOURCE=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
-LINUX26_SITE=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.6
-
-LINUX26_FORMAT=vmlinux
-LINUX26_BINLOC=$(LINUX26_FORMAT)
-
-# Linux kernel configuration file
-#LINUX26_KCONFIG=$(ALCHEMY_DBAU1500_PATH)/linux26.config
-LINUX26_KCONFIG=$(BOARD_PATH)/linux26.config
-
-# File name for the Linux kernel binary
-LINUX26_KERNEL=linux-kernel-$(LINUX26_VERSION)-$(KERNEL_ARCH).srec
-
-# Version of Linux AFTER patches
-LINUX26_DIR=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
-
-# kernel patches
-# This is default anyway
-# LINUX26_PATCH_DIR=$(BOARD_PATH)/kernel-patches/
-
-LINUX26_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) \
-	PATH=$(TARGET_PATH) INSTALL_MOD_PATH=$(TARGET_DIR) \
-	CROSS_COMPILE=$(KERNEL_CROSS)
-
-
-
-
-$(DL_DIR)/$(LINUX26_SOURCE):
-	 $(call DOWNLOAD,$(LINUX26_SITE),$(LINUX26_SOURCE))
-
-$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
-	rm -rf $(LINUX26_DIR)
-	$(BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
-	# Rename the dir from the downloaded version to the AFTER patch version
-	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(BUILD_DIR)/linux-$(LINUX26_VERSION)
-endif
-	touch $(LINUX26_DIR)/.unpacked
-
-$(LINUX26_KCONFIG):
-	@if [ ! -f "$(LINUX26_KCONFIG)" ]; then \
-		echo ""; \
-		echo "You should create a .config for your kernel"; \
-		echo "and install it as $(LINUX26_KCONFIG)"; \
-		echo ""; \
-		sleep 5; \
-	fi
-
-$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked
-	#toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR)
-	touch $(LINUX26_DIR)/.patched
-
-$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
-	-cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
-	touch $(LINUX26_DIR)/.configured
-
-linux26-menuconfig: $(LINUX26_DIR)/.patched
-	[ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
-	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
-	touch $(LINUX26_DIR)/.depend_done
-
-$(LINUX26_KERNEL): $(LINUX26_DIR)/.depend_done
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(LINUX26_FORMAT) bzImage
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
-	$(KERNEL_CROSS)objcopy -O srec $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
-	touch -c $(LINUX26_KERNEL)
-
-$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_KERNEL)
-	rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
-	rm -f $(TARGET_DIR)/sbin/cardmgr
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
-		DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \
-		INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
-	rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build
-	touch -c $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
-
-linux26: cross-depmod26 $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
-
-linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
-
-# This has been renamed so we do _NOT_ by default run this on 'make clean'
-linux26clean:
-	rm -f $(LINUX26_KERNEL)
-	-$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
-
-linux26-dirclean:
-	rm -rf $(LINUX26_DIR)
-
-endif

target/device/AMD/DBAu1500/target_skeleton/dev/log

@@ -1 +0,0 @@
-../tmp/log

target/device/AMD/DBAu1500/target_skeleton/etc/TZ

@@ -1 +0,0 @@
-MST7MDT

target/device/AMD/DBAu1500/target_skeleton/etc/fstab

@@ -1,8 +0,0 @@
-# /etc/fstab: static file system information.
-#
-# <file system> <mount pt>     <type>	<options>         <dump> <pass>
-/dev/root       /              ext2	rw,noauto         0      1
-proc		/proc	       proc     defaults	  0	 0
-devpts		/dev/pts       devpts   defaults,gid=5,mode=620	  0	 0
-tmpfs           /tmp           tmpfs    defaults          0      0
-

target/device/AMD/DBAu1500/target_skeleton/etc/group

@@ -1,14 +0,0 @@
-root:x:0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-wheel:x:10:root
-utmp:x:43:
-staff:x:50:
-nobody:x:99:
-nogroup:x:99:
-users:x:100:
-default:x:1000:

target/device/AMD/DBAu1500/target_skeleton/etc/hostname

@@ -1 +0,0 @@
-uclibc

target/device/AMD/DBAu1500/target_skeleton/etc/hosts

@@ -1 +0,0 @@
-127.0.0.1	localhost

target/device/AMD/DBAu1500/target_skeleton/etc/init.d/S20urandom

@@ -1,54 +0,0 @@
-#! /bin/sh
-#
-# urandom	This script saves the random seed between reboots.
-#		It is called from the boot, halt and reboot scripts.
-#
-# Version:	@(#)urandom  1.33  22-Jun-1998  miquels@cistron.nl
-#
-
-[ -c /dev/urandom ] || exit 0
-#. /etc/default/rcS
-
-case "$1" in
-	start|"")
-		if [ "$VERBOSE" != no ]
-		then
-			echo -n "Initializing random number generator... "
-		fi
-		# Load and then save 512 bytes,
-		# which is the size of the entropy pool
-		if [ -f /etc/random-seed ]
-		then
-			cat /etc/random-seed >/dev/urandom
-		fi
-		# check for read only file system
-		if ! touch /etc/random-seed 2>/dev/null
-		then
-			echo "read-only file system detected...done"
-			exit
-		fi
-		rm -f /etc/random-seed
-		umask 077
-		dd if=/dev/urandom of=/etc/random-seed count=1 \
-			>/dev/null 2>&1 || echo "urandom start: failed."
-		umask 022
-		[ "$VERBOSE" != no ] && echo "done."
-		;;
-	stop)
-		if ! touch /etc/random-seed 2>/dev/null
-                then
-                        exit
-                fi
-		# Carry a random seed from shut-down to start-up;
-		# see documentation in linux/drivers/char/random.c
-		[ "$VERBOSE" != no ] && echo -n "Saving random seed... "
-		umask 077
-		dd if=/dev/urandom of=/etc/random-seed count=1 \
-			>/dev/null 2>&1 || echo "urandom stop: failed."
-		[ "$VERBOSE" != no ] && echo "done."
-		;;
-	*)
-		echo "Usage: urandom {start|stop}" >&2
-		exit 1
-		;;
-esac

target/device/AMD/DBAu1500/target_skeleton/etc/init.d/S40network

@@ -1,35 +0,0 @@
-#!/bin/sh
-#
-# Start the network....
-#
-
-start() {
- 	echo "Starting network..."
-	/sbin/ifup -a
-}	
-stop() {
-	echo -n "Stopping network..."
-	/sbin/ifdown -a
-}
-restart() {
-	stop
-	start
-}	
-
-case "$1" in
-  start)
-  	start
-	;;
-  stop)
-  	stop
-	;;
-  restart|reload)
-  	restart
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart}"
-	exit 1
-esac
-
-exit $?
-

target/device/AMD/DBAu1500/target_skeleton/etc/init.d/rcS

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-
-# Start all init scripts in /etc/init.d
-# executing them in numerical order.
-#
-for i in /etc/init.d/S??* ;do
-
-     # Ignore dangling symlinks (if any).
-     [ ! -f "$i" ] && continue
-
-     case "$i" in
-	*.sh)
-	    # Source shell script for speed.
-	    (
-		trap - INT QUIT TSTP
-		set start
-		. $i
-	    )
-	    ;;
-	*)
-	    # No sh extension, so fork subprocess.
-	    $i start
-	    ;;
-    esac
-done
-

target/device/AMD/DBAu1500/target_skeleton/etc/inittab

@@ -1,47 +0,0 @@
-# /etc/inittab
-#
-# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
-#
-# Note: BusyBox init doesn't support runlevels.  The runlevels field is
-# completely ignored by BusyBox init. If you want runlevels, use
-# sysvinit.
-#
-# Format for each entry: <id>:<runlevels>:<action>:<process>
-#
-# id        == tty to run on, or empty for /dev/console
-# runlevels == ignored
-# action    == one of sysinit, respawn, askfirst, wait, and once
-# process   == program to run
-
-# Startup the system
-null::sysinit:/bin/mount -o remount,rw /
-null::sysinit:/bin/mount -t proc proc /proc
-null::sysinit:/bin/mount -a
-null::sysinit:/bin/hostname -F /etc/hostname
-null::sysinit:/sbin/ifconfig lo 127.0.0.1 up
-null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
-# now run any rc scripts
-::sysinit:/etc/init.d/rcS
-
-# Set up a couple of getty's
-#tty1::respawn:/sbin/getty 38400 tty1
-#tty2::respawn:/sbin/getty 38400 tty2
-
-# Put a getty on the serial port
-ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-
-# Logging junk
-null::sysinit:/bin/touch /var/log/messages
-null::respawn:/sbin/syslogd -n -m 0
-null::respawn:/sbin/klogd -n
-#tty3::respawn:/usr/bin/tail -f /var/log/messages
-
-# Stuff to do for the 3-finger salute
-::ctrlaltdel:/sbin/reboot
-
-# Stuff to do before rebooting
-null::shutdown:/usr/bin/killall klogd
-null::shutdown:/usr/bin/killall syslogd
-null::shutdown:/bin/umount -a -r
-null::shutdown:/sbin/swapoff -a
-

target/device/AMD/DBAu1500/target_skeleton/etc/inputrc

@@ -1,44 +0,0 @@
-# /etc/inputrc - global inputrc for libreadline
-# See readline(3readline) and `info readline' for more information.
-
-# Be 8 bit clean.
-set input-meta on
-set output-meta on
-set bell-style visible
-
-# To allow the use of 8bit-characters like the german umlauts, comment out
-# the line below. However this makes the meta key not work as a meta key,
-# which is annoying to those which don't need to type in 8-bit characters.
-
-# set convert-meta off
-
-"\e0d": backward-word
-"\e0c": forward-word
-"\e[h": beginning-of-line
-"\e[f": end-of-line
-"\e[1~": beginning-of-line
-"\e[4~": end-of-line
-#"\e[5~": beginning-of-history
-#"\e[6~": end-of-history
-"\e[3~": delete-char
-"\e[2~": quoted-insert
-
-# Common standard keypad and cursor
-# (codes courtsey Werner Fink, <werner@suse.de>)
-#"\e[1~": history-search-backward
-"\e[2~": yank
-"\e[3~": delete-char
-#"\e[4~": set-mark
-"\e[5~": history-search-backward
-"\e[6~": history-search-forward
-# Normal keypad and cursor of xterm
-"\e[F": end-of-line
-"\e[H": beginning-of-line
-# Application keypad and cursor of xterm
-"\eOA": previous-history
-"\eOC": forward-char
-"\eOB": next-history
-"\eOD": backward-char
-"\eOF": end-of-line
-"\eOH": beginning-of-line
-

target/device/AMD/DBAu1500/target_skeleton/etc/issue

@@ -1,4 +0,0 @@
-
-
-Welcome to the Erik's uClibc development environment.
-

target/device/AMD/DBAu1500/target_skeleton/etc/mtab

@@ -1 +0,0 @@
-../proc/mounts

target/device/AMD/DBAu1500/target_skeleton/etc/network/interfaces

@@ -1,4 +0,0 @@
-# Configure Loopback
-auto lo
-iface lo inet loopback
-

target/device/AMD/DBAu1500/target_skeleton/etc/passwd

@@ -1,13 +0,0 @@
-root:x:0:0:root:/root:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-sshd:x:103:99:Operator:/var:/bin/sh
-nobody:x:99:99:nobody:/home:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh

target/device/AMD/DBAu1500/target_skeleton/etc/profile

@@ -1,48 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
-    if [ "$BASH" ]; then
-	export PS1="[\u@\h \W]\\$ "
-	alias ll='/bin/ls --color=tty -laFh'
-	alias ls='/bin/ls --color=tty -F'
-	export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-    else
-      if [ "`id -u`" -eq 0 ]; then 
-	export PS1='# '
-      else
-	export PS1='$ '
-      fi
-    fi
-
-    export USER=`id -un`
-    export LOGNAME=$USER
-    export HOSTNAME=`/bin/hostname`
-    export HISTSIZE=1000
-    export HISTFILESIZE=1000
-    export PAGER='/bin/more '
-    export EDITOR='/bin/vi'
-    export INPUTRC=/etc/inputrc
-    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-
-    ### Some aliases
-    alias ps2='ps facux '
-    alias ps1='ps faxo "%U %t %p %a" '
-    alias af='ps af'
-    alias cls='clear'
-    alias df='df -h'
-    alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
-    #alias bc='bc -l'
-    alias minicom='minicom -c on'
-    alias calc='calc -Cd '
-    alias bc='calc -Cd '
-fi;

target/device/AMD/DBAu1500/target_skeleton/etc/protocols

@@ -1,31 +0,0 @@
-# /etc/protocols:
-# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $
-#
-# Internet (IP) protocols
-#
-#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-
-ip	0	IP		# internet protocol, pseudo protocol number
-icmp	1	ICMP		# internet control message protocol
-igmp	2	IGMP		# Internet Group Management
-ggp	3	GGP		# gateway-gateway protocol
-ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
-st	5	ST		# ST datagram mode
-tcp	6	TCP		# transmission control protocol
-egp	8	EGP		# exterior gateway protocol
-pup	12	PUP		# PARC universal packet protocol
-udp	17	UDP		# user datagram protocol
-hmp	20	HMP		# host monitoring protocol
-xns-idp	22	XNS-IDP		# Xerox NS IDP
-rdp	27	RDP		# "reliable datagram" protocol
-iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4
-xtp	36	XTP		# Xpress Tranfer Protocol
-ddp	37	DDP		# Datagram Delivery Protocol
-idpr-cmtp	39	IDPR-CMTP	# IDPR Control Message Transport
-rspf	73	RSPF		#Radio Shortest Path First.
-vmtp	81	VMTP		# Versatile Message Transport
-ospf	89	OSPFIGP		# Open Shortest Path First IGP
-ipip	94	IPIP		# Yet Another IP encapsulation
-encap	98	ENCAP		# Yet Another IP encapsulation

target/device/AMD/DBAu1500/target_skeleton/etc/resolv.conf

@@ -1 +0,0 @@
-../tmp/resolv.conf

target/device/AMD/DBAu1500/target_skeleton/etc/securetty

@@ -1,12 +0,0 @@
-tty1
-tty2
-tty3
-tty4
-tty5
-tty6
-tty7
-tty8
-ttyS0
-ttyS1
-ttyS2
-ttyS3

target/device/AMD/DBAu1500/target_skeleton/etc/services

@@ -1,302 +0,0 @@
-# /etc/services:
-# $Id: services,v 1.1 2004/10/09 02:49:18 andersen Exp $
-#
-# Network services, Internet style
-#
-# Note that it is presently the policy of IANA to assign a single well-known
-# port number for both TCP and UDP; hence, most entries here have two entries
-# even if the protocol doesn't support UDP operations.
-# Updated from RFC 1700, ``Assigned Numbers'' (October 1994).  Not all ports
-# are included, only the more common ones.
-
-tcpmux		1/tcp				# TCP port service multiplexer
-echo		7/tcp
-echo		7/udp
-discard		9/tcp		sink null
-discard		9/udp		sink null
-systat		11/tcp		users
-daytime		13/tcp
-daytime		13/udp
-netstat		15/tcp
-qotd		17/tcp		quote
-msp		18/tcp				# message send protocol
-msp		18/udp				# message send protocol
-chargen		19/tcp		ttytst source
-chargen		19/udp		ttytst source
-ftp-data	20/tcp
-ftp		21/tcp
-fsp		21/udp		fspd
-ssh		22/tcp				# SSH Remote Login Protocol
-ssh		22/udp				# SSH Remote Login Protocol
-telnet		23/tcp
-# 24 - private
-smtp		25/tcp		mail
-# 26 - unassigned
-time		37/tcp		timserver
-time		37/udp		timserver
-rlp		39/udp		resource	# resource location
-nameserver	42/tcp		name		# IEN 116
-whois		43/tcp		nicname
-re-mail-ck	50/tcp				# Remote Mail Checking Protocol
-re-mail-ck	50/udp				# Remote Mail Checking Protocol
-domain		53/tcp		nameserver	# name-domain server
-domain		53/udp		nameserver
-mtp		57/tcp				# deprecated
-bootps		67/tcp				# BOOTP server
-bootps		67/udp
-bootpc		68/tcp				# BOOTP client
-bootpc		68/udp
-tftp		69/udp
-gopher		70/tcp				# Internet Gopher
-gopher		70/udp
-rje		77/tcp		netrjs
-finger		79/tcp
-www		80/tcp		http		# WorldWideWeb HTTP
-www		80/udp				# HyperText Transfer Protocol
-link		87/tcp		ttylink
-kerberos	88/tcp		kerberos5 krb5	# Kerberos v5
-kerberos	88/udp		kerberos5 krb5	# Kerberos v5
-supdup		95/tcp
-# 100 - reserved
-hostnames	101/tcp		hostname	# usually from sri-nic
-iso-tsap	102/tcp		tsap		# part of ISODE.
-csnet-ns	105/tcp		cso-ns		# also used by CSO name server
-csnet-ns	105/udp		cso-ns
-# unfortunately the poppassd (Eudora) uses a port which has already
-# been assigned to a different service. We list the poppassd as an
-# alias here. This should work for programs asking for this service.
-# (due to a bug in inetd the 3com-tsmux line is disabled)
-#3com-tsmux	106/tcp		poppassd
-#3com-tsmux	106/udp		poppassd
-rtelnet		107/tcp				# Remote Telnet
-rtelnet		107/udp
-pop-2		109/tcp		postoffice	# POP version 2
-pop-2		109/udp
-pop-3		110/tcp				# POP version 3
-pop-3		110/udp
-sunrpc		111/tcp		portmapper	# RPC 4.0 portmapper TCP
-sunrpc		111/udp		portmapper	# RPC 4.0 portmapper UDP
-auth		113/tcp		authentication tap ident
-sftp		115/tcp
-uucp-path	117/tcp
-nntp		119/tcp		readnews untp	# USENET News Transfer Protocol
-ntp		123/tcp
-ntp		123/udp				# Network Time Protocol
-netbios-ns	137/tcp				# NETBIOS Name Service
-netbios-ns	137/udp
-netbios-dgm	138/tcp				# NETBIOS Datagram Service
-netbios-dgm	138/udp
-netbios-ssn	139/tcp				# NETBIOS session service
-netbios-ssn	139/udp
-imap2		143/tcp				# Interim Mail Access Proto v2
-imap2		143/udp
-snmp		161/udp				# Simple Net Mgmt Proto
-snmp-trap	162/udp		snmptrap	# Traps for SNMP
-cmip-man	163/tcp				# ISO mgmt over IP (CMOT)
-cmip-man	163/udp
-cmip-agent	164/tcp
-cmip-agent	164/udp
-xdmcp		177/tcp				# X Display Mgr. Control Proto
-xdmcp		177/udp
-nextstep	178/tcp		NeXTStep NextStep	# NeXTStep window
-nextstep	178/udp		NeXTStep NextStep	# server
-bgp		179/tcp				# Border Gateway Proto.
-bgp		179/udp
-prospero	191/tcp				# Cliff Neuman's Prospero
-prospero	191/udp
-irc		194/tcp				# Internet Relay Chat
-irc		194/udp
-smux		199/tcp				# SNMP Unix Multiplexer
-smux		199/udp
-at-rtmp		201/tcp				# AppleTalk routing
-at-rtmp		201/udp
-at-nbp		202/tcp				# AppleTalk name binding
-at-nbp		202/udp
-at-echo		204/tcp				# AppleTalk echo
-at-echo		204/udp
-at-zis		206/tcp				# AppleTalk zone information
-at-zis		206/udp
-qmtp		209/tcp				# The Quick Mail Transfer Protocol
-qmtp		209/udp				# The Quick Mail Transfer Protocol
-z3950		210/tcp		wais		# NISO Z39.50 database
-z3950		210/udp		wais
-ipx		213/tcp				# IPX
-ipx		213/udp
-imap3		220/tcp				# Interactive Mail Access
-imap3		220/udp				# Protocol v3
-ulistserv	372/tcp				# UNIX Listserv
-ulistserv	372/udp
-https		443/tcp				# MCom
-https		443/udp				# MCom
-snpp		444/tcp				# Simple Network Paging Protocol
-snpp		444/udp				# Simple Network Paging Protocol
-saft		487/tcp				# Simple Asynchronous File Transfer
-saft		487/udp				# Simple Asynchronous File Transfer
-npmp-local	610/tcp		dqs313_qmaster	# npmp-local / DQS
-npmp-local	610/udp		dqs313_qmaster	# npmp-local / DQS
-npmp-gui	611/tcp		dqs313_execd	# npmp-gui / DQS
-npmp-gui	611/udp		dqs313_execd	# npmp-gui / DQS
-hmmp-ind	612/tcp		dqs313_intercell# HMMP Indication / DQS
-hmmp-ind	612/udp		dqs313_intercell# HMMP Indication / DQS
-#
-# UNIX specific services
-#
-exec		512/tcp
-biff		512/udp		comsat
-login		513/tcp
-who		513/udp		whod
-shell		514/tcp		cmd		# no passwords used
-syslog		514/udp
-printer		515/tcp		spooler		# line printer spooler
-talk		517/udp
-ntalk		518/udp
-route		520/udp		router routed	# RIP
-timed		525/udp		timeserver
-tempo		526/tcp		newdate
-courier		530/tcp		rpc
-conference	531/tcp		chat
-netnews		532/tcp		readnews
-netwall		533/udp				# -for emergency broadcasts
-uucp		540/tcp		uucpd		# uucp daemon
-afpovertcp	548/tcp				# AFP over TCP
-afpovertcp	548/udp				# AFP over TCP
-remotefs	556/tcp		rfs_server rfs	# Brunhoff remote filesystem
-klogin		543/tcp				# Kerberized `rlogin' (v5)
-kshell		544/tcp		krcmd		# Kerberized `rsh' (v5)
-kerberos-adm	749/tcp				# Kerberos `kadmin' (v5)
-#
-webster		765/tcp				# Network dictionary
-webster		765/udp
-#
-# From ``Assigned Numbers'':
-#
-#> The Registered Ports are not controlled by the IANA and on most systems
-#> can be used by ordinary user processes or programs executed by ordinary
-#> users.
-#
-#> Ports are used in the TCP [45,106] to name the ends of logical
-#> connections which carry long term conversations.  For the purpose of
-#> providing services to unknown callers, a service contact port is
-#> defined.  This list specifies the port used by the server process as its
-#> contact port.  While the IANA can not control uses of these ports it
-#> does register or list uses of these ports as a convienence to the
-#> community.
-#
-nfsdstatus	1110/tcp
-nfsd-keepalive	1110/udp
-
-ingreslock	1524/tcp
-ingreslock	1524/udp
-prospero-np	1525/tcp			# Prospero non-privileged
-prospero-np	1525/udp
-datametrics	1645/tcp	old-radius	# datametrics / old radius entry
-datametrics	1645/udp	old-radius	# datametrics / old radius entry
-sa-msg-port	1646/tcp	old-radacct	# sa-msg-port / old radacct entry
-sa-msg-port	1646/udp	old-radacct	# sa-msg-port / old radacct entry
-radius		1812/tcp			# Radius
-radius		1812/udp			# Radius
-radacct		1813/tcp			# Radius Accounting
-radacct		1813/udp			# Radius Accounting
-nfsd		2049/tcp	nfs
-nfsd		2049/udp	nfs
-cvspserver	2401/tcp			# CVS client/server operations
-cvspserver	2401/udp			# CVS client/server operations
-mysql		3306/tcp			# MySQL
-mysql		3306/udp			# MySQL
-rfe		5002/tcp			# Radio Free Ethernet
-rfe		5002/udp			# Actually uses UDP only
-cfengine	5308/tcp			# CFengine
-cfengine	5308/udp			# CFengine
-bbs		7000/tcp			# BBS service
-#
-#
-# Kerberos (Project Athena/MIT) services
-# Note that these are for Kerberos v4, and are unofficial.  Sites running
-# v4 should uncomment these and comment out the v5 entries above.
-#
-kerberos4	750/udp		kerberos-iv kdc	# Kerberos (server) udp
-kerberos4	750/tcp		kerberos-iv kdc	# Kerberos (server) tcp
-kerberos_master	751/udp				# Kerberos authentication
-kerberos_master	751/tcp				# Kerberos authentication
-passwd_server	752/udp				# Kerberos passwd server
-krb_prop	754/tcp				# Kerberos slave propagation
-krbupdate	760/tcp		kreg		# Kerberos registration
-kpasswd		761/tcp		kpwd		# Kerberos "passwd"
-kpop		1109/tcp			# Pop with Kerberos
-knetd		2053/tcp			# Kerberos de-multiplexor
-zephyr-srv	2102/udp			# Zephyr server
-zephyr-clt	2103/udp			# Zephyr serv-hm connection
-zephyr-hm	2104/udp			# Zephyr hostmanager
-eklogin		2105/tcp			# Kerberos encrypted rlogin
-#
-# Unofficial but necessary (for NetBSD) services
-#
-supfilesrv	871/tcp				# SUP server
-supfiledbg	1127/tcp			# SUP debugging
-#
-# Datagram Delivery Protocol services
-#
-rtmp		1/ddp				# Routing Table Maintenance Protocol
-nbp		2/ddp				# Name Binding Protocol
-echo		4/ddp				# AppleTalk Echo Protocol
-zip		6/ddp				# Zone Information Protocol
-#
-# Services added for the Debian GNU/Linux distribution
-poppassd	106/tcp				# Eudora
-poppassd	106/udp				# Eudora
-mailq		174/tcp				# Mailer transport queue for Zmailer
-mailq		174/tcp				# Mailer transport queue for Zmailer
-omirr		808/tcp		omirrd		# online mirror
-omirr		808/udp		omirrd		# online mirror
-rmtcfg		1236/tcp			# Gracilis Packeten remote config server
-xtel		1313/tcp			# french minitel
-coda_opcons	1355/udp			# Coda opcons            (Coda fs)
-coda_venus	1363/udp			# Coda venus             (Coda fs)
-coda_auth	1357/udp			# Coda auth              (Coda fs)
-coda_udpsrv	1359/udp			# Coda udpsrv            (Coda fs)
-coda_filesrv	1361/udp			# Coda filesrv           (Coda fs)
-codacon		1423/tcp	venus.cmu	# Coda Console           (Coda fs)
-coda_aux1	1431/tcp			# coda auxiliary service (Coda fs)
-coda_aux1	1431/udp			# coda auxiliary service (Coda fs)
-coda_aux2	1433/tcp			# coda auxiliary service (Coda fs)
-coda_aux2	1433/udp			# coda auxiliary service (Coda fs)
-coda_aux3	1435/tcp			# coda auxiliary service (Coda fs)
-coda_aux3	1435/udp			# coda auxiliary service (Coda fs)
-cfinger		2003/tcp			# GNU Finger
-afbackup	2988/tcp			# Afbackup system
-afbackup	2988/udp			# Afbackup system
-icp		3130/tcp			# Internet Cache Protocol (Squid)
-icp		3130/udp			# Internet Cache Protocol (Squid)
-postgres	5432/tcp			# POSTGRES
-postgres	5432/udp			# POSTGRES
-fax		4557/tcp			# FAX transmission service        (old)
-hylafax		4559/tcp			# HylaFAX client-server protocol  (new)
-noclog		5354/tcp			# noclogd with TCP (nocol)
-noclog		5354/udp			# noclogd with UDP (nocol)
-hostmon		5355/tcp			# hostmon uses TCP (nocol)
-hostmon		5355/udp			# hostmon uses TCP (nocol)
-ircd		6667/tcp			# Internet Relay Chat
-ircd		6667/udp			# Internet Relay Chat
-webcache	8080/tcp			# WWW caching service
-webcache	8080/udp			# WWW caching service
-tproxy		8081/tcp			# Transparent Proxy
-tproxy		8081/udp			# Transparent Proxy
-mandelspawn	9359/udp	mandelbrot	# network mandelbrot
-amanda		10080/udp			# amanda backup services
-amandaidx	10082/tcp			# amanda backup services
-amidxtape	10083/tcp			# amanda backup services
-isdnlog		20011/tcp			# isdn logging system
-isdnlog		20011/udp			# isdn logging system
-vboxd		20012/tcp			# voice box system
-vboxd		20012/udp			# voice box system
-binkp           24554/tcp			# Binkley
-binkp           24554/udp			# Binkley
-asp		27374/tcp			# Address Search Protocol
-asp		27374/udp			# Address Search Protocol
-tfido           60177/tcp			# Ifmail
-tfido           60177/udp			# Ifmail
-fido            60179/tcp			# Ifmail
-fido            60179/udp			# Ifmail
-
-# Local services
-

target/device/AMD/DBAu1500/target_skeleton/etc/shadow

@@ -1,12 +0,0 @@
-root::10933:0:99999:7:::
-bin:*:10933:0:99999:7:::
-daemon:*:10933:0:99999:7:::
-adm:*:10933:0:99999:7:::
-lp:*:10933:0:99999:7:::
-sync:*:10933:0:99999:7:::
-shutdown:*:10933:0:99999:7:::
-halt:*:10933:0:99999:7:::
-uucp:*:10933:0:99999:7:::
-operator:*:10933:0:99999:7:::
-nobody:*:10933:0:99999:7:::
-default::10933:0:99999:7:::

target/device/AMD/DBAu1500/target_skeleton/root/.bash_logout

@@ -1,7 +0,0 @@
-# ~/.bash_logout: executed by bash(1) when login shell exits.
-
-# when leaving the console clear the screen to increase privacy
-
-case "`tty`" in
-    /dev/tty[0-9]*) clear
-esac

target/device/AMD/DBAu1500/target_skeleton/root/.bash_profile

@@ -1,15 +0,0 @@
-# .bash_profile
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-umask 022
-
-if [ -f ~/.bashrc ]; then
-    source ~/.bashrc
-fi

target/device/AMD/DBAu1500/target_skeleton/root/.bashrc

@@ -1,48 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
-    if [ "$BASH" ]; then
-	export PS1="[\u@\h \W]\\$ "
-    else
-      if [ "`id -u`" -eq 0 ]; then 
-	export PS1='# '
-      else
-	export PS1='$ '
-      fi
-    fi
-
-    export USER=`id -un`
-    export LOGNAME=$USER
-    export HOSTNAME=`/bin/hostname`
-    export HISTSIZE=1000
-    export HISTFILESIZE=1000
-    export PAGER='/bin/more '
-    export EDITOR='/bin/vi'
-    export INPUTRC=/etc/inputrc
-    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-    export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-
-    ### Some aliases
-    alias ps2='ps facux '
-    alias ps1='ps faxo "%U %t %p %a" '
-    alias af='ps af'
-    alias cls='clear'
-    alias ll='/bin/ls -laFh'
-    alias ls='/bin/ls -F'
-    alias df='df -h'
-    alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
-    #alias bc='bc -l'
-    alias minicom='minicom -c on'
-    alias calc='calc -Cd '
-    alias bc='calc -Cd '
-fi;

target/device/AMD/DBAu1500/target_skeleton/usr/share/udhcpc/default.script

@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# udhcpc script edited by Tim Riker <Tim@Rikers.org>
-
-[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
-
-RESOLV_CONF="/etc/resolv.conf"
-[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
-[ -n "$subnet" ] && NETMASK="netmask $subnet"
-
-case "$1" in
-	deconfig)
-		/sbin/ifconfig $interface 0.0.0.0
-		;;
-
-	renew|bound)
-		/sbin/ifconfig $interface $ip $BROADCAST $NETMASK
-
-		if [ -n "$router" ] ; then
-			echo "deleting routers"
-			while route del default gw 0.0.0.0 dev $interface ; do
-				:
-			done
-
-			for i in $router ; do
-				route add default gw $i dev $interface
-			done
-		fi
-
-		echo -n > $RESOLV_CONF
-		[ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
-		for i in $dns ; do
-			echo adding dns $i
-			echo nameserver $i >> $RESOLV_CONF
-		done
-		;;
-esac
-
-exit 0

target/device/AMD/DBAu1500/target_skeleton/var/lib/pcmcia

@@ -1 +0,0 @@
-../../tmp

target/device/AMD/DBAu1500/target_skeleton/var/lock

@@ -1 +0,0 @@
-../tmp

target/device/AMD/DBAu1500/target_skeleton/var/log

@@ -1 +0,0 @@
-../tmp

target/device/AMD/DBAu1500/target_skeleton/var/pcmcia

@@ -1 +0,0 @@
-../tmp

target/device/AMD/DBAu1500/target_skeleton/var/run

@@ -1 +0,0 @@
-../tmp

target/device/AMD/DBAu1500/target_skeleton/var/spool

@@ -1 +0,0 @@
-../tmp

target/device/AMD/DBAu1500/target_skeleton/var/tmp

@@ -1 +0,0 @@
-../tmp

target/device/AMD/Makefile.in

@@ -1,7 +0,0 @@
-# Override the default uClibc configuration
-ifeq ($(BR2_TARGET_AMD_ALCHEMY_DBAU1500),y)
-
-include target/device/AMD/DBAu1500/Makefile.in
-include target/device/AMD/DBAu1500/linux.mk
-
-endif

target/device/Config.in

@@ -4,7 +4,6 @@ source "project/Config.in"
 
 comment "Preset Devices"
 
-source "target/device/AMD/Config.in"
 source "target/device/ARMLTD/Config.in"
 source "target/device/Atmel/Config.in"
 source "target/device/KwikByte/Config.in"