board/versal: change pdi filename to boot.pdi

With the Segmented Configuration, the Versal PDI files will have new names:
<design>_boot.pdi - Minimal DDR and PS config for booting
<design>_pld.pdi - Remainder of FPGA design to be loaded at run-time

Since this will be the new default, this patch aligns the Buildroot file
naming by replacing the obscure vpl_gen_fixed.pdi filename with a simpler
boot.pdi filename.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>

board/versal/post-image.sh

@@ -17,7 +17,7 @@ cat <<-__HEADER_EOF > "${BINARIES_DIR}/bootgen.bif"
 	the_ROM_image:
 	{
 	  image {
-	    { type=bootimage, file=${BINARIES_DIR}/vpl_gen_fixed.pdi }
+	    { type=bootimage, file=${BINARIES_DIR}/boot.pdi }
 	    { type=bootloader, file=${BINARIES_DIR}/plm.elf }
 	    { core=psm, file=${BINARIES_DIR}/psmfw.elf }
 	  }

boot/xilinx-prebuilt/xilinx-prebuilt.mk

@@ -37,7 +37,7 @@ XILINX_PREBUILT_PLM = $(@D)/pdi_files/gen_files/plm.elf
 # psm*fw.elf is used.
 XILINX_PREBUILT_PSMFW = $(@D)/pdi_files/static_files/psm*fw.elf
 # We need the *.pdi glob, because the file has different names for the
-# different boards, and it has to be named vpl_gen_fixed.pdi when installed.
+# different boards, and it has to be named boot.pdi when installed.
 # If Segmented Configuration is used, there will be two pdi files and we need
 # the file that has "_boot.pdi" in the filename.
 define XILINX_PREBUILT_INSTALL_VERSAL_XSA_BOOT_PDI
@@ -46,13 +46,13 @@ define XILINX_PREBUILT_INSTALL_VERSAL_XSA_BOOT_PDI
 			$(@D)/*_boot.pdi, \
 			$(@D)/*.pdi \
 		) \
-		$(BINARIES_DIR)/vpl_gen_fixed.pdi
+		$(BINARIES_DIR)/boot.pdi
 endef
 else # BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA
 XILINX_PREBUILT_PLM = $(XILINX_PREBUILT_BOARD_DIR)/plm.elf
 XILINX_PREBUILT_PSMFW = $(XILINX_PREBUILT_BOARD_DIR)/psmfw.elf
 # We need the *.pdi glob, because the file has different names for the
-# different boards, and it has to be named vpl_gen_fixed.pdi when installed.
+# different boards, and it has to be named boot.pdi when installed.
 # If Segmented Configuration is used, there will be two pdi files and we need
 # the file that has "_boot.pdi" in the filename.
 define XILINX_PREBUILT_INSTALL_VERSAL_BOOT_PDI
@@ -61,7 +61,7 @@ define XILINX_PREBUILT_INSTALL_VERSAL_BOOT_PDI
 			$(XILINX_PREBUILT_BOARD_DIR)/*_boot.pdi, \
 			$(XILINX_PREBUILT_BOARD_DIR)/*.pdi \
 		) \
-		$(BINARIES_DIR)/vpl_gen_fixed.pdi
+		$(BINARIES_DIR)/boot.pdi
 endef
 endif # BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA