Patch by michael tesch <tesch1@gmail.com> ...

  The real problem, only caused when you have a *.patch file in the
  main build directory, is that the Makefiles don't escape the globbing
  operator they're passing to patch-kernel.sh.  Attached is a patch to
  fix that.

make/binutils-uclibc.mk

@@ -33,7 +33,7 @@ $(BINUTILS_DIR)/.unpacked: $(DL_DIR)/$(BINUTILS_SOURCE)
 
 $(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked
 	# Apply appropriate binutils patches.
-	$(SOURCE_DIR)/patch-kernel.sh $(BINUTILS_DIR) $(SOURCE_DIR)/binutils/$(BINUTILS_VERSION) *.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(BINUTILS_DIR) $(SOURCE_DIR)/binutils/$(BINUTILS_VERSION) \*.patch
 	touch $(BINUTILS_DIR)/.patched
 
 $(BINUTILS_DIR1)/.configured: $(BINUTILS_DIR)/.patched

make/busybox.mk

@@ -25,7 +25,7 @@ busybox-source: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)
 $(BUSYBOX_DIR)/.configured: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)
 	$(BUSYBOX_UNZIP) $(DL_DIR)/$(BUSYBOX_SOURCE) | tar -C $(BUILD_DIR) -xvf -
 	# Allow busybox patches.
-	$(SOURCE_DIR)/patch-kernel.sh $(BUSYBOX_DIR) $(SOURCE_DIR) busybox-*.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(BUSYBOX_DIR) $(SOURCE_DIR) busybox-\*.patch
 	cp $(BUSYBOX_CONFIG) $(BUSYBOX_DIR)/.config
 	$(SED) "s,^CROSS.*,CROSS=$(TARGET_CROSS)\n\
 		PREFIX=$(TARGET_DIR),;" $(BUSYBOX_DIR)/Rules.mak

make/dnsmasq.mk

@@ -23,7 +23,7 @@ $(DL_DIR)/$(DNSMASQ_SOURCE):
 $(DNSMASQ_DIR)/.source: $(DL_DIR)/$(DNSMASQ_SOURCE)
 	zcat $(DL_DIR)/$(DNSMASQ_SOURCE) | tar -C $(BUILD_DIR) -xvf -
 	$(SOURCE_DIR)/patch-kernel.sh $(DNSMASQ_DIR) $(SOURCE_DIR) \
-		$(DNSMASQ_VER)-*.patch
+		$(DNSMASQ_VER)-\*.patch
 	touch $(DNSMASQ_DIR)/.source
 
 $(DNSMASQ_DIR)/$(DNSMASQ_BINARY): $(DNSMASQ_DIR)/.source

make/dropbear_sshd.mk

@@ -18,7 +18,7 @@ dropbear_sshd-source: $(DL_DIR)/$(DROPBEAR_SSHD_SOURCE)
 
 $(DROPBEAR_SSHD_DIR)/.unpacked: $(DL_DIR)/$(DROPBEAR_SSHD_SOURCE)
 	$(DROPBEAR_SSHD_CAT) $(DL_DIR)/$(DROPBEAR_SSHD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-	$(SOURCE_DIR)/patch-kernel.sh $(DROPBEAR_SSHD_DIR) $(SOURCE_DIR) dropbear-*.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(DROPBEAR_SSHD_DIR) $(SOURCE_DIR) dropbear-\*.patch
 	$(SED) 's,^/\* #define DROPBEAR_MULTI.*,#define DROPBEAR_MULTI,g' $(DROPBEAR_SSHD_DIR)/options.h
 	touch $(DROPBEAR_SSHD_DIR)/.unpacked
 

make/gcc-uclibc-2.95.mk

@@ -62,7 +62,7 @@ $(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
 
 $(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
 	# Apply any files named gcc-*.patch from the source directory to gcc
-	$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR)/gcc/$(GCC_VERSION) *.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR)/gcc/$(GCC_VERSION) \*.patch
 	#
 	# We do not wish to build the libstdc++ library provided with gcc,
 	# since it doesn't seem to work at all with uClibc plus gcc 2.95...

make/gcc-uclibc-3.x.mk

@@ -67,7 +67,7 @@ $(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
 
 $(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
 	# Apply any files named gcc-*.patch from the source directory to gcc
-	$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR)/gcc/$(GCC_VERSION) *.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR)/gcc/$(GCC_VERSION) \*.patch
 	# Note: The soft float situation has improved considerably with gcc 3.4.x.
 	# We can dispense with the custom spec files, as well as libfloat for the arm case.
 	# However, we still need a patch for arm.  There's a similar patch for gcc 3.3.x

make/gdb.mk

@@ -22,7 +22,7 @@ $(DL_DIR)/$(GDB_SOURCE):
 
 $(GDB_DIR)/.unpacked: $(DL_DIR)/$(GDB_SOURCE)
 	$(GDB_CAT) $(DL_DIR)/$(GDB_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
-	$(SOURCE_DIR)/patch-kernel.sh $(GDB_DIR) $(SOURCE_DIR)/gdb/$(GDB_VERSION) *.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(GDB_DIR) $(SOURCE_DIR)/gdb/$(GDB_VERSION) \*.patch
 	# Copy a config.sub from gcc.  This is only necessary until
 	# gdb's config.sub supports <arch>-linux-uclibc tuples.
 	# Should probably integrate this into the patch.

make/iptables.mk

@@ -16,7 +16,7 @@ $(IPTABLES_BUILD_DIR)/.unpacked: $(DL_DIR)/$(IPTABLES_SOURCE)
 
 $(IPTABLES_BUILD_DIR)/.configured: $(IPTABLES_BUILD_DIR)/.unpacked
 	# Allow patches.  Needed for openwrt for instance.
-	$(SOURCE_DIR)/patch-kernel.sh $(IPTABLES_BUILD_DIR) $(SOURCE_DIR) iptables-*.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(IPTABLES_BUILD_DIR) $(SOURCE_DIR) iptables-\*.patch
 	#
 	$(SED) "s;\[ -f /usr/include/netinet/ip6.h \];grep -q '__UCLIBC_HAS_IPV6__ 1' \
 		$(BUILD_DIR)/uClibc/include/bits/uClibc_config.h;" $(IPTABLES_BUILD_DIR)/Makefile

make/kernel-headers.mk

@@ -56,7 +56,7 @@ endif
 	touch $(LINUX_DIR)/.unpacked
 
 $(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR) $(SOURCE_DIR) linux-libc-headers-$(LINUX_VERSION)-*.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR) $(SOURCE_DIR) linux-libc-headers-$(LINUX_VERSION)-\*.patch
 	touch $(LINUX_DIR)/.patched
 
 $(LINUX_DIR)/.configured: $(LINUX_DIR)/.patched

make/mrouted.mk

@@ -24,7 +24,7 @@ mrouted-source: $(DL_DIR)/$(MROUTED_SOURCE) $(DL_DIR)/$(MROUTED_PATCH)
 $(MROUTED_DIR)/.unpacked: mrouted-source
 	$(MROUTED_CAT) $(DL_DIR)/$(MROUTED_SOURCE) | tar -C $(BUILD_DIR) -xvf -
 	$(MROUTED_CAT) $(DL_DIR)/$(MROUTED_PATCH) | patch -p1 -d $(MROUTED_DIR)
-	$(SOURCE_DIR)/patch-kernel.sh $(MROUTED_DIR) $(SOURCE_DIR) mrouted-*.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(MROUTED_DIR) $(SOURCE_DIR) mrouted-\*.patch
 	touch $(MROUTED_DIR)/.unpacked
 
 $(MROUTED_DIR)/$(MROUTED_BINARY): $(MROUTED_DIR)/.unpacked

make/ncurses.mk

@@ -5,7 +5,7 @@
 #
 #############################################################
 # Copyright (C) 2002 by Ken Restivo <ken@246gt.com>
-# $Id: ncurses.mk,v 1.34 2004/09/03 00:49:33 mjn3 Exp $
+# $Id: ncurses.mk,v 1.35 2004/09/09 10:50:57 mjn3 Exp $
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU Library General Public License as
@@ -35,7 +35,7 @@ $(NCURSES_DIR)/.dist: $(DL_DIR)/$(NCURSES_SOURCE)
 	#use the local tic and not whatever the build system was going to find.
 	$(SED) 's~\$$srcdir/shlib tic\$$suffix~/usr/bin/tic~' \
 		$(NCURSES_DIR)/misc/run_tic.in
-	$(SOURCE_DIR)/patch-kernel.sh $(NCURSES_DIR) $(SOURCE_DIR) ncurses-*.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(NCURSES_DIR) $(SOURCE_DIR) ncurses-\*.patch
 	touch  $(NCURSES_DIR)/.dist
 
 $(NCURSES_DIR)/.configured: $(NCURSES_DIR)/.dist

make/uclibc.mk

@@ -18,7 +18,7 @@ UCLIBC_SITE:=http://www.uclibc.org/downloads
 endif
 
 UCLIBC_TARGET_ARCH:=$(shell echo $(ARCH) | sed -e s'/-.*//' \
-                -e 's/i.86/i386/' \
+		-e 's/i.86/i386/' \
 		-e 's/sparc.*/sparc/' \
 		-e 's/arm.*/arm/g' \
 		-e 's/m68k.*/m68k/' \