board/zynqmp: add new qspi.bin binary to images

This patch adds the new qspi.bin file to the zynqmp sdcard.img.

For SD card booting, the qspi.bin file is unnecessary and can just be ignored.
For QSPI booting, only the qspi.bin file needs to be written to the flash.

This patch enables the Kria BIRT tool for Kria SOM reflashing using qspi.bin
as either "ImageA" or "ImageB".

Kria BIRT (Boot Image Recovery Tool):
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+SOMs+Starter+Kits#Boot-FW-Update-Process

Signed-off-by: Neal Frager <neal.frager@amd.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/zynqmp/genimage.cfg

@@ -3,6 +3,7 @@ image boot.vfat {
 		files = {
 			"boot.bin",
 			"u-boot.itb",
+			"qspi.bin",
 			"system.dtb",
 			"Image"
 		}

configs/zynqmp_kria_kd240_defconfig

@@ -35,6 +35,7 @@ BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
 BR2_TARGET_UBOOT_USE_BINMAN=y
 BR2_TARGET_UBOOT_FORMAT_ITB=y
+BR2_TARGET_UBOOT_FORMAT_QSPI_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
 BR2_TARGET_UBOOT_ZYNQMP=y

configs/zynqmp_kria_kr260_defconfig

@@ -35,6 +35,7 @@ BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
 BR2_TARGET_UBOOT_USE_BINMAN=y
 BR2_TARGET_UBOOT_FORMAT_ITB=y
+BR2_TARGET_UBOOT_FORMAT_QSPI_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
 BR2_TARGET_UBOOT_ZYNQMP=y

configs/zynqmp_kria_kv260_defconfig

@@ -35,6 +35,7 @@ BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
 BR2_TARGET_UBOOT_USE_BINMAN=y
 BR2_TARGET_UBOOT_FORMAT_ITB=y
+BR2_TARGET_UBOOT_FORMAT_QSPI_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
 BR2_TARGET_UBOOT_ZYNQMP=y

configs/zynqmp_zcu102_defconfig

@@ -34,6 +34,7 @@ BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
 BR2_TARGET_UBOOT_USE_BINMAN=y
 BR2_TARGET_UBOOT_FORMAT_ITB=y
+BR2_TARGET_UBOOT_FORMAT_QSPI_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
 BR2_TARGET_UBOOT_ZYNQMP=y

configs/zynqmp_zcu104_defconfig

@@ -34,6 +34,7 @@ BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
 BR2_TARGET_UBOOT_USE_BINMAN=y
 BR2_TARGET_UBOOT_FORMAT_ITB=y
+BR2_TARGET_UBOOT_FORMAT_QSPI_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
 BR2_TARGET_UBOOT_ZYNQMP=y

configs/zynqmp_zcu106_defconfig

@@ -34,6 +34,7 @@ BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
 BR2_TARGET_UBOOT_USE_BINMAN=y
 BR2_TARGET_UBOOT_FORMAT_ITB=y
+BR2_TARGET_UBOOT_FORMAT_QSPI_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
 BR2_TARGET_UBOOT_ZYNQMP=y