fix links to Technologic Systems web resources

Technologic Systems has rebranded as embeddedTS with the current
domain eventually going offline. Update web/doc URLs to correct
resource locations.

Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0b058e15f5334dac93f42b92ea31525afdc2c27c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/technologic/ts4900/readme.txt

@@ -9,7 +9,7 @@ Freescale i.MX6 Single or Quad Core ARM Cortex-A9 CPU clocked at
 1GHz. The TS-4900 features Gigabit Ethernet, SATA II Port, PCI Express
 Bus, high speed USB host and device (OTG), and microSD card.
 More details on the board here:
-   http://wiki.embeddedarm.com/wiki/TS-4900
+   https://docs.embeddedTS.com/TS-4900
 
 The TS-4900 is not currently supported by mainline Linux, so a
 Technologic Systems Linux is used based on Linux 4.1.
@@ -48,5 +48,5 @@ connector etc.
 The bootloader comes pre-flashed on the board on an SPI flash. Since
 updating the bootloader is risky and not trivial, it is not included
 in the Buildroot defconfig. Refer to
-http://wiki.embeddedarm.com/wiki/TS-4900#U-Boot for details on which
+https://docs.embeddedTS.com/TS-4900#U-Boot for details on which
 U-Boot config to use and how to flash it.

board/technologic/ts5500/readme.txt

@@ -5,7 +5,7 @@ This document explains how to set up a basic Buildroot system for the
 Technologic Systems TS-5x00 serie of x86-based Single Board Computers.
 
 TS-5x00 Single Board Computers are based on the AMD Elan520 processor. For more
-information please have a look at http://wiki.embeddedarm.com/wiki/#AMD
+information please have a look at https://docs.embeddedTS.com/Documentation_Home#AMD
 
 The kernel configuration works for any AMD Elan520-based SBCs, but the support
 is enhanced for the TS-5500 and TS-5400 models (on-board devices registration
@@ -45,7 +45,7 @@ config, the BIOS must use Logical Block Addressing (LBA). You can do it by
 choosing "Ide 0: AUTOCONFIG, LBA" under "IDE DRIVE GEOMETRY" in the "Basic CMOS
 Configuration" screen. Also, don't forget to set the 'active' (or 'bootable')
 flag on partition 1. For details about the CMOS setup, please see:
-http://wiki.embeddedarm.com/wiki/TS-5500#System_BIOS_Setup_Screens
+https://docs.embeddedts.com/TS-5500#System_BIOS_Setup_Screens
 
 Connect a terminal program to the rs232 connector marked "COM2"
 with baudrate set to 115200, insert the Compact Flash card into the socket,

board/technologic/ts7680/readme.txt

@@ -8,7 +8,7 @@ The TS-7680 SBC is based on the Freescale i.MX286 ARM ARM926EJ-S
 running at 454MHz. The TS-7680 features are 10/100 Ethernet ports,
 Wi-Fi, microSD card, eMMC, NOR Flash, USB host port, CAN ports,
 relays and ADC/DAC. More details on the board here:
-https://wiki.embeddedarm.com/wiki/TS-7680
+https://docs.embeddedTS.com/TS-7680
 
 The TS-7680 uses a 4.9 Linux kernel provided by Technologic Systems.
 
@@ -46,5 +46,5 @@ the SD jumper is present and the U-Boot jumper is not.
 The bootloader comes pre-flashed on the board on an SPI flash. Since
 updating the bootloader is risky and not trivial, it is not included
 in the Buildroot defconfig. Refer to
-https://wiki.embeddedarm.com/wiki/TS-7680#U-Boot for details on
+https://docs.embeddedts.com/TS-7680#U-Boot for details on
 which U-Boot config to use and how to flash it.

configs/ts7680_defconfig

@@ -4,7 +4,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/technologic/ts7680/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,embeddedarm,linux-4.9.y,d03d426e6abd95a973bc669315206295713c17e8)/linux-d03d426e6abd95a973bc669315206295713c17e8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,embeddedTS,linux-4.9.y,d03d426e6abd95a973bc669315206295713c17e8)/linux-d03d426e6abd95a973bc669315206295713c17e8.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="ts_imx28"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x40008000"

package/ts4900-fpga/Config.in

@@ -8,4 +8,4 @@ config BR2_PACKAGE_TS4900_FPGA
 	  It is loaded by U-Boot during the boot sequence, the default
 	  U-boot script expects to find it in the /boot folder.
 
-	  http://wiki.embeddedarm.com/wiki/TS-4900#FPGA_Changelog
+	  https://docs.embeddedts.com/TS-4900#FPGA_Changelog

package/ts4900-fpga/ts4900-fpga.hash

@@ -1,5 +1,5 @@
-# From ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4900-linux/fpga/ts4900-fpga-20150930.bin.md5
-md5 bf93c03ef914cf008287c8cd60781cc8  ts4900-fpga-20150930.bin
+# From https://files.embeddedts.com/ts-socket-macrocontrollers/ts-4900-linux/fpga//ts4900-fpga-20150930.bin.md5
+md5  bf93c03ef914cf008287c8cd60781cc8  ts4900-fpga-20150930.bin
 
 # Locally calculated
-sha256 242ac6a90bea9a95c937ea8952cdc9b02f543cea24a0359bed66a408a6dd8bf9 ts4900-fpga-20150930.bin
+sha256  242ac6a90bea9a95c937ea8952cdc9b02f543cea24a0359bed66a408a6dd8bf9  ts4900-fpga-20150930.bin

package/ts4900-fpga/ts4900-fpga.mk

@@ -6,9 +6,9 @@
 
 TS4900_FPGA_VERSION = 20150930
 TS4900_FPGA_SOURCE = ts4900-fpga-$(TS4900_FPGA_VERSION).bin
-TS4900_FPGA_SITE = ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4900-linux/fpga
+TS4900_FPGA_SITE = https://files.embeddedts.com/ts-socket-macrocontrollers/ts-4900-linux/fpga
 # No license file provided, Yocto recipe from the vendor claims MIT.
-# https://github.com/embeddedarm/meta-ts/blob/f31860f1204b64f765a5380d3b93a2cf18234f90/recipes-extras/ts4900-fpga/ts4900-fpga.bb#L6
+# https://github.com/embeddedTS/meta-ts/blob/f31860f1204b64f765a5380d3b93a2cf18234f90/recipes-extras/ts4900-fpga/ts4900-fpga.bb#L6
 
 define TS4900_FPGA_EXTRACT_CMDS
 	cp $(TS4900_FPGA_DL_DIR)/$(TS4900_FPGA_SOURCE) $(@D)