configs/mx6sx_udoo: bump U-Boot and kernel

Bump U-Boot to 2022.01 and kernel to 5.15.13.

After the conversion to U-Boot device model, the SD card is
device '1', so change the boot script accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/udoo/common/boot.scr.txt

@@ -1,7 +1,7 @@
-setenv finduuid "part uuid mmc 0:1 uuid"
+setenv finduuid "part uuid mmc 1:1 uuid"
 run finduuid
 run findfdt
 setenv bootargs "console=${console} root=PARTUUID=${uuid} rootwait rootfstype=ext4"
-load mmc 0:1 ${fdt_addr} boot/${fdtfile}
-load mmc 0:1 ${loadaddr} boot/zImage
+load mmc 1:1 ${fdt_addr} boot/${fdtfile}
+load mmc 1:1 ${loadaddr} boot/zImage
 bootz ${loadaddr} - ${fdt_addr}

configs/mx6sx_udoo_neo_defconfig

@@ -3,8 +3,8 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-# Linux headers same as kernel, a 5.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_8=y
+# Linux headers same as kernel, a 5.15 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/udoo/common/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_TARGET_ROOTFS_EXT2=y
@@ -12,13 +12,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="udoo_neo"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01"
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.8.13"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.13"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-udoo-neo-basic imx6sx-udoo-neo-full imx6sx-udoo-neo-extended"