Bump fakeroot version and add patch

package/fakeroot/fakeroot-revert-ltmain.patch

@@ -0,0 +1,8937 @@
+--- fakeroot-1.8.1/ltmain.sh	2007-10-08 02:27:58.000000000 +0200
++++ fakeroot-1.8.1.works/ltmain.sh	2007-10-10 09:46:24.000000000 +0200
+@@ -1,32 +1,30 @@
+ # Generated from ltmain.m4sh; do not edit by hand
+ 
+-# ltmain.sh (GNU libtool 1.2460 2007/05/10 17:30:29) 2.1a
++# ltmain.sh (GNU libtool 1.2237 2005/12/21 11:40:47) 2.1a
+ # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+ 
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 Free Software Foundation, Inc.
+ # This is free software; see the source for copying conditions.  There is NO
+ # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ 
+-# GNU Libtool is free software; you can redistribute it and/or modify
++# This program is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+ # the Free Software Foundation; either version 2 of the License, or
+ # (at your option) any later version.
+ #
+-# As a special exception to the GNU General Public License,
+-# if you distribute this file as part of a program or library that
+-# is built using GNU Libtool, you may include this file under the
+-# same distribution terms that you use for the rest of that program.
+-#
+-# GNU Libtool is distributed in the hope that it will be useful, but
++# This program is distributed in the hope that it will be useful, but
+ # WITHOUT ANY WARRANTY; without even the implied warranty of
+ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ # General Public License for more details.
+ #
+ # You should have received a copy of the GNU General Public License
+-# along with GNU Libtool; see the file COPYING.  If not, a copy
+-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+-# or obtained by writing to the Free Software Foundation, Inc.,
+-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
+ 
+ # Usage: $progname [OPTION]... [MODE-ARG]...
+ #
+@@ -60,12 +58,12 @@
+ # When reporting a bug, please describe a test case to reproduce it and
+ # include the following information:
+ #
+-#       host-triplet:	$host
++#       host-triplet:	i486-pc-linux-gnu
+ #       shell:		$SHELL
+ #       compiler:		$LTCC
+ #       compiler flags:		$LTCFLAGS
+ #       linker:		$LD (gnu? $with_gnu_ld)
+-#       $progname:		(GNU libtool 1.2460 2007/05/10 17:30:29) 2.1a Debian-1
++#       $progname:		(GNU libtool 1.2237 2005/12/21 11:40:47) 2.1a
+ #       automake:		$automake_version
+ #       autoconf:		$autoconf_version
+ #
+@@ -73,10 +71,14 @@
+ 
+ PROGRAM=ltmain.sh
+ PACKAGE=libtool
+-VERSION="2.1a Debian-1"
+-TIMESTAMP=" 1.2460 2007/05/10 17:30:29"
++VERSION="2.1a"
++TIMESTAMP=" 1.2460 2005/12/21 11:40:47"
+ package_revision=1.2460
+ 
++## --------------------- ##
++## M4sh Initialization.  ##
++## --------------------- ##
++
+ # Be Bourne compatible
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+   emulate sh
+@@ -84,37 +86,74 @@ if test -n "${ZSH_VERSION+set}" && (emul
+   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+   # is contrary to our usage.  Disable this feature.
+   alias -g '${1+"$@"}'='"$@"'
+-  setopt NO_GLOB_SUBST
+-else
+-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
++elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
++  set -o posix
+ fi
+-BIN_SH=xpg4; export BIN_SH # for Tru64
+ DUALCASE=1; export DUALCASE # for MKS sh
+ 
+-# NLS nuisances: We save the old values to restore during execute mode.
+-# Only set LANG and LC_ALL to C if already set.
+-# These must not be set unconditionally because not all systems understand
+-# e.g. LANG=C (notably SCO).
+-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++# Support unset when possible.
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++  as_unset=unset
++else
++  as_unset=false
++fi
++
++
++# Work around bugs in pre-3.0 UWIN ksh.
++$as_unset ENV MAIL MAILPATH
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++for as_var in \
++  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
++  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
++  LC_TELEPHONE LC_TIME
+ do
+-  eval "if test \"\${$lt_var+set}\" = set; then
+-          save_$lt_var=\$$lt_var
+-          $lt_var=C
+-	  export $lt_var
+-	fi"
++  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
++    eval $as_var=C; export $as_var
++  else
++    $as_unset $as_var
++  fi
+ done
+ 
+-$lt_unset CDPATH
++# Required to use basename.
++if expr a : '\(a\)' >/dev/null 2>&1; then
++  as_expr=expr
++else
++  as_expr=false
++fi
++
++if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
++  as_basename=basename
++else
++  as_basename=false
++fi
++
+ 
++# Name of the executable.
++as_me=`$as_basename "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++	 X"$0" : 'X\(//\)$' \| \
++	 X"$0" : 'X\(/\)$' \| \
++	 .     : '\(.\)' 2>/dev/null ||
++echo X/"$0" |
++    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
++  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
++  	  /^X\/\(\/\).*/{ s//\1/; q; }
++  	  s/.*/./; q'`
+ 
+ 
++$as_unset CDPATH
++
+ 
+ 
+ : ${CP="cp -f"}
+ : ${ECHO="echo"}
+-: ${EGREP="/bin/grep -E"}
+-: ${FGREP="/bin/grep -F"}
+-: ${GREP="/bin/grep"}
++: ${EGREP="grep -E"}
++: ${FGREP="grep -F"}
++: ${GREP="grep"}
+ : ${LN_S="ln -s"}
+ : ${MAKE="make"}
+ : ${MKDIR="mkdir"}
+@@ -185,17 +224,23 @@ double_quote_subst='s/\(["`\\]\)/\\\1/g'
+ # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+ # in input to double_quote_subst, that '$' was protected from expansion.
+ # Since each input `\' is now two `\'s, look for any number of runs of
+-# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+-bs='\\'
+-bs2='\\\\'
+-bs4='\\\\\\\\'
+-dollar='\$'
+-sed_double_backslash="\
+-  s/$bs4/&\\
+-/g
+-  s/^$bs2$dollar/$bs&/
+-  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+-  s/\n//g"
++# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.  Note
++# that the embedded single quotes serve only to enhance readability.
++sed_double_backslash='s/^\(\(''\\\\''\\\\''\)*''\\\\''\)\$/\1\\$/;
++                s/\([^\\]\(''\\\\''\\\\''\)*''\\\\''\)\$/\1\\$/g'
++
++# test EBCDIC or ASCII
++case `echo X|tr X '\101'` in
++ A) # ASCII based system
++    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
++  SP2NL='tr \040 \012'
++  NL2SP='tr \015\012 \040\040'
++  ;;
++ *) # EBCDIC based system
++  SP2NL='tr \100 \n'
++  NL2SP='tr \r\n \100\100'
++  ;;
++esac
+ 
+ # Standard options:
+ opt_dry_run=false
+@@ -208,7 +253,7 @@ opt_verbose=false
+ # name if it has been set yet.
+ func_echo ()
+ {
+-    $ECHO "$progname${mode+: }$mode: $*"
++    $ECHO "$progname${mode+: }$mode: "${1+"$@"}
+ }
+ 
+ # func_verbose arg...
+@@ -425,18 +470,14 @@ func_show_eval ()
+ }
+ 
+ 
+-
+-
+-
+ # func_version
+ # Echo version message to standard output and exit.
+ func_version ()
+ {
+     $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+-        s/^# //
+-	s/^# *$//
+-        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+-        p
++        s/^# //; s/^# *$//;
++        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/;
++        p;
+      }' < "$progpath"
+      exit $?
+ }
+@@ -446,10 +487,9 @@ func_version ()
+ func_usage ()
+ {
+     $SED -n '/^# Usage:/,/# -h/ {
+-        s/^# //
+-	s/^# *$//
+-	s/\$progname/'$progname'/
+-	p
++        s/^# //; s/^# *$//;
++	s/\$progname/'$progname'/;
++	p;
+     }' < "$progpath"
+     $ECHO
+     $ECHO "run \`$progname --help | more' for full usage"
+@@ -461,18 +501,16 @@ func_usage ()
+ func_help ()
+ {
+     $SED -n '/^# Usage:/,/# Report bugs to/ {
+-        s/^# //
+-	s/^# *$//
+-	s*\$progname*'$progname'*
+-	s*\$host*'"$host"'*
+-	s*\$SHELL*'"$SHELL"'*
+-	s*\$LTCC*'"$LTCC"'*
+-	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+-	s*\$LD*'"$LD"'*
+-	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+-	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+-	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+-	p
++        s/^# //; s/^# *$//;
++	s*\$progname*'$progname'*;
++	s*\$SHELL*'"$SHELL"'*;
++	s*\$LTCC*'"$LTCC"'*;
++	s*\$LTCFLAGS*'"$LTCFLAGS"'*;
++	s*\$LD*'"$LD"'*;
++	s/\$with_gnu_ld/'"$with_gnu_ld"'/;
++	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/;
++	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/;
++	p;
+      }' < "$progpath"
+     exit $?
+ }
+@@ -489,9 +527,6 @@ func_missing_arg ()
+ exit_cmd=:
+ 
+ 
+-
+-
+-
+ # Check that we have a working $ECHO.
+ if test "X$1" = X--no-reexec; then
+   # Discard the --no-reexec flag, and continue.
+@@ -526,8 +561,6 @@ execute_dlfiles=
+ preserve_args=
+ lo2o="s/\\.lo\$/.${objext}/"
+ o2lo="s/\\.${objext}\$/.lo/"
+-extracted_archives=
+-extracted_serial=0
+ 
+ opt_dry_run=false
+ opt_duplicate_deps=false
+@@ -743,9 +776,9 @@ The following components of LINK-COMMAND
+   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+   -export-symbols SYMFILE
+-                    try to export only the symbols listed in SYMFILE
++		    try to export only the symbols listed in SYMFILE
+   -export-symbols-regex REGEX
+-                    try to export only the symbols matching REGEX
++		    try to export only the symbols matching REGEX
+   -LLIBDIR          search LIBDIR for required installed libraries
+   -lNAME            OUTPUT-FILE requires the installed library libNAME
+   -module           build a library that can dlopened
+@@ -761,11 +794,9 @@ The following components of LINK-COMMAND
+   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+   -shared           only do dynamic linking of libtool libraries
+   -shrext SUFFIX    override the standard shared library file extension
+-  -static           do not do any dynamic linking of uninstalled libtool libraries
+-  -static-libtool-libs
+-                    do not do any dynamic linking of libtool libraries
++  -static           do not do any dynamic linking of libtool libraries
+   -version-info CURRENT[:REVISION[:AGE]]
+-                    specify library version info [each variable defaults to 0]
++		    specify library version info [each variable defaults to 0]
+   -weak LIBNAME     declare that the target provides the LIBNAME interface
+ 
+ All other options (arguments beginning with \`-') are ignored.
+@@ -810,12 +841,15 @@ Otherwise, only FILE itself is deleted u
+     exit $?
+ }
+ 
+-# Generated shell functions inserted here.
+-
+-
++# TEST SUITE MARKER ## NON-FUNCTION
+ # Parse options once, thoroughly.  This comes as soon as possible in
+ # the script to make things like `libtool --version' happen quickly.
+ {
++  # sed scripts:
++  my_sed_single_opt='1s/^\(..\).*$/\1/;q'
++  my_sed_single_rest='1s/^..\(.*\)$/\1/;q'
++  my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
++  my_sed_long_arg='1s/^-[^=]*=//'
+ 
+   # Shorthand for --mode=foo, only valid as the first argument
+   case $1 in
+@@ -907,11 +941,28 @@ Otherwise, only FILE itself is deleted u
+ 
+       # Separate optargs to long options:
+       -dlopen=*|--mode=*|--tag=*)
+-			func_opt_split "$opt"
+-			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
++			arg=`$ECHO "X$opt" | $Xsed -e "$my_sed_long_arg"`
++			opt=`$ECHO "X$opt" | $Xsed -e "$my_sed_long_opt"`
++			set dummy "$opt" "$arg" ${1+"$@"}
+ 			shift
+ 			;;
+ 
++      # Separate optargs to short options:
++#      -x*|-y*)
++#			arg=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_rest"`
++#			opt=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_opt"`
++#			set dummy "$opt" "$arg" ${1+"$@"}
++#			shift
++#			;;
++
++      # Separate non-argument short options:
++#      -z*|-z*|-y*)
++#			rest=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_rest"`
++#			opt=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_opt"`
++#			set dummy "$opt" "-$rest" ${1+"$@"}
++#			shift
++#			;;
++
+       -\?|-h)		func_usage					;;
+       --help)		opt_help=:					;;
+       --version)	func_version					;;
+@@ -941,6 +992,7 @@ Otherwise, only FILE itself is deleted u
+   # anything was wrong.
+   $exit_cmd $EXIT_FAILURE
+ }
++# TEST SUITE MARKER ## BEGIN SOURCABLE
+ 
+ # func_check_version_match
+ # Ensure that we are using m4 macros, and libtool script from the same
+@@ -978,38 +1030,6 @@ _LT_EOF
+ }
+ 
+ 
+-## ----------- ##
+-##    Main.    ##
+-## ----------- ##
+-
+-{
+-  # Sanity checks first:
+-  func_check_version_match
+-
+-  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+-    func_fatal_configuration "not configured to build any kind of library"
+-  fi
+-
+-  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+-
+-
+-  # Darwin sucks
+-  eval std_shrext=\"$shrext_cmds\"
+-
+-
+-  # Only execute mode is allowed to have -dlopen flags.
+-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+-    func_error "unrecognized option \`-dlopen'"
+-    $ECHO "$help" 1>&2
+-    exit $EXIT_FAILURE
+-  fi
+-
+-  # Change the help message to a mode-specific one.
+-  generic_help="$help"
+-  help="Try \`$progname --help --mode=$mode' for more information."
+-}
+-
+-
+ # func_lalib_p file
+ # True iff FILE is a libtool `.la' library or `.lo' object file.
+ # This function is only a basic sanity check; it will hardly flush out
+@@ -1086,6 +1106,9 @@ func_source ()
+ }
+ 
+ 
++# Generated shell functions inserted here.
++
++
+ # func_win32_libid arg
+ # return the library type of file 'arg'
+ #
+@@ -1105,14 +1128,7 @@ func_win32_libid ()
+     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+        $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+       win32_nmres=`eval $NM -f posix -A $1 |
+-	$SED -n -e '
+-	    1,100{
+-		/ I /{
+-		    s,.*,import,
+-		    p
+-		    q
+-		}
+-	    }'`
++	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+       case $win32_nmres in
+       import*)  win32_libid_type="x86 archive import";;
+       *)        win32_libid_type="x86 archive static";;
+@@ -1332,33 +1348,31 @@ extern \"C\" {
+ 	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+ 
+ /* The mapping between symbol names and symbols.  */
+-typedef struct {
+-  const char *name;
+-  void *address;
+-} lt_dlsymlist;
+ "
+ 	  case $host in
+ 	  *cygwin* | *mingw* )
+ 	    $ECHO >> "$output_objdir/$my_dlsyms" "\
+ /* DATA imports from DLLs on WIN32 con't be const, because
+    runtime relocations are performed -- see ld's documentation
+-   on pseudo-relocs.  */"
+-	    lt_dlsym_const= ;;
+-	  *osf5*)
+-	    echo >> "$output_objdir/$my_dlsyms" "\
+-/* This system does not cope well with relocations in const data */"
+-	    lt_dlsym_const= ;;
++   on pseudo-relocs.  */
++   struct {
++"
++	    ;;
+ 	  *)
+-	    lt_dlsym_const=const ;;
++	    $ECHO >> "$output_objdir/$my_dlsyms" "\
++const struct {
++"
++	    ;;
+ 	  esac
+ 
+ 	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+-extern $lt_dlsym_const lt_dlsymlist
+-lt_${my_prefix}_LTX_preloaded_symbols[];
+-$lt_dlsym_const lt_dlsymlist
++   const char *name;
++   void *address;
++}
+ lt_${my_prefix}_LTX_preloaded_symbols[] =
+ {\
+-  { \"$my_originator\", (void *) 0 },"
++  { \"$my_originator\", (void *) 0 },
++"
+ 
+ 	  eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ 
+@@ -1482,17 +1496,7 @@ func_extract_archives ()
+       esac
+       func_basename "$my_xlib"
+       my_xlib="$func_basename_result"
+-      my_xlib_u=$my_xlib
+-      while :; do
+-        case " $extracted_archives " in
+-	*" $my_xlib_u "*)
+-	  extracted_serial=`expr $extracted_serial + 1`
+-	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+-	*) break ;;
+-	esac
+-      done
+-      extracted_archives="$extracted_archives $my_xlib_u"
+-      my_xdir="$my_gentop/$my_xlib_u"
++      my_xdir="$my_gentop/$my_xlib"
+ 
+       func_mkdir_p "$my_xdir"
+ 
+@@ -1546,44 +1550,6 @@ func_extract_archives ()
+ }
+ 
+ 
+-
+-# func_write_libtool_object output_name pic_name nonpic_name
+-# Create a libtool object file (analogous to a ".la" file),
+-# but don't create it if we're doing a dry run.
+-func_write_libtool_object ()
+-{
+-    write_libobj=${1}
+-    if test "$build_libtool_libs" = yes; then
+-      write_lobj=\'${2}\'
+-    else
+-      write_lobj=none
+-    fi
+-
+-    if test "$build_old_libs" = yes; then
+-      write_oldobj=\'${3}\'
+-    else
+-      write_oldobj=none
+-    fi
+-
+-    $opt_dry_run || {
+-      cat >${write_libobj}T <<EOF
+-# $write_libobj - a libtool object file
+-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+-#
+-# Please DO NOT delete this file!
+-# It is necessary for linking the library.
+-
+-# Name of the PIC object.
+-pic_object=$write_lobj
+-
+-# Name of the non-PIC object
+-non_pic_object=$write_oldobj
+-
+-EOF
+-      mv -f "${write_libobj}T" "${write_libobj}"
+-    }
+-}
+-
+ # func_mode_compile arg...
+ func_mode_compile ()
+ {
+@@ -1708,16 +1674,15 @@ func_mode_compile ()
+     *.class) xform=class ;;
+     *.cpp) xform=cpp ;;
+     *.cxx) xform=cxx ;;
+-    *.[fF][09]?) xform='[fF][09].' ;;
++    *.f90) xform=f90 ;;
+     *.for) xform=for ;;
+     *.java) xform=java ;;
+-    *.obj) xform=obj ;;
+     esac
+ 
+     libobj=`$ECHO "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+ 
+     case $libobj in
+-    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
++    *.lo) obj=`$ECHO "X$libobj" | $Xsed -e "$lo2o"` ;;
+     *)
+       func_fatal_error "cannot determine name of library object from \`$libobj'"
+       ;;
+@@ -1833,6 +1798,18 @@ compiler."
+ 
+     $opt_dry_run || $RM "$libobj" "${libobj}T"
+ 
++    # Create a libtool object file (analogous to a ".la" file),
++    # but don't create it if we're doing a dry run.
++    $opt_dry_run || cat > ${libobj}T <<EOF
++# $libobj - a libtool object file
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++#
++# Please DO NOT delete this file!
++# It is necessary for linking the library.
++
++# Name of the PIC object.
++EOF
++
+     # Only build a PIC object if we are building libtool libraries.
+     if test "$build_libtool_libs" = yes; then
+       # Without this assignment, base_compile gets emptied.
+@@ -1883,10 +1860,23 @@ compiler."
+ 	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+       fi
+ 
++      # Append the name of the PIC object to the libtool object file.
++      $opt_dry_run || cat >> ${libobj}T <<EOF
++pic_object='$objdir/$objname'
++
++EOF
++
+       # Allow error messages only from the first compilation.
+       if test "$suppress_opt" = yes; then
+ 	suppress_output=' >/dev/null 2>&1'
+       fi
++    else
++      # No PIC object so indicate it doesn't exist in the libtool
++      # object file.
++      $opt_dry_run || cat >> ${libobj}T <<EOF
++pic_object=none
++
++EOF
+     fi
+ 
+     # Only build a position-dependent object if we build old libraries.
+@@ -1932,10 +1922,26 @@ compiler."
+ 	func_show_eval '$MV "$output_obj" "$obj"' \
+ 	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+       fi
++
++      # Append the name of the non-PIC object the libtool object file.
++      # Only append if the libtool object file exists.
++      $opt_dry_run || cat >> ${libobj}T <<EOF
++# Name of the non-PIC object.
++non_pic_object='$objname'
++
++EOF
++    else
++      # Append the name of the non-PIC object the libtool object file.
++      # Only append if the libtool object file exists.
++      $opt_dry_run || cat >> ${libobj}T <<EOF
++# Name of the non-PIC object.
++non_pic_object=none
++
++EOF
+     fi
+ 
+     $opt_dry_run || {
+-      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
++      $MV "${libobj}T" "${libobj}"
+ 
+       # Unlock the critical section if it was locked
+       if test "$need_locks" != no; then
+@@ -1946,8 +1952,6 @@ compiler."
+     exit $EXIT_SUCCESS
+ }
+ 
+-test "$mode" = compile && func_mode_compile ${1+"$@"}
+-
+ 
+ # func_mode_execute arg...
+ func_mode_execute ()
+@@ -1989,9 +1993,7 @@ func_mode_execute ()
+ 	if test -f "$dir/$objdir/$dlname"; then
+ 	  dir="$dir/$objdir"
+ 	else
+-	  if test ! -f "$dir/$dlname"; then
+-	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+-	  fi
++	  func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ 	fi
+ 	;;
+ 
+@@ -2051,14 +2053,12 @@ func_mode_execute ()
+       fi
+ 
+       # Restore saved environment variables
+-      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+-      do
+-	eval "if test \"\${save_$lt_var+set}\" = set; then
+-                $lt_var=\$save_$lt_var; export $lt_var
+-	      else
+-		$lt_unset $lt_var
+-	      fi"
+-      done
++      if test "${save_LC_ALL+set}" = set; then
++	LC_ALL="$save_LC_ALL"; export LC_ALL
++      fi
++      if test "${save_LANG+set}" = set; then
++	LANG="$save_LANG"; export LANG
++      fi
+ 
+       # Now prepare to actually exec the command.
+       exec_cmd="\$cmd$args"
+@@ -2073,8 +2073,6 @@ func_mode_execute ()
+     fi
+ }
+ 
+-test "$mode" = execute && func_mode_execute ${1+"$@"}
+-
+ 
+ # func_mode_finish arg...
+ func_mode_finish ()
+@@ -2153,8 +2151,6 @@ func_mode_finish ()
+     exit $EXIT_SUCCESS
+ }
+ 
+-test "$mode" = finish && func_mode_finish ${1+"$@"}
+-
+ 
+ # func_mode_install arg...
+ func_mode_install ()
+@@ -2414,8 +2410,7 @@ func_mode_install ()
+ 	# Deduce the name of the destination old-style object file.
+ 	case $destfile in
+ 	*.lo)
+-	  func_lo2o "$destfile"
+-	  staticdest=$func_lo2o_result
++	  staticdest=`$ECHO "X$destfile" | $Xsed -e "$lo2o"`
+ 	  ;;
+ 	*.$objext)
+ 	  staticdest="$destfile"
+@@ -2433,8 +2428,7 @@ func_mode_install ()
+ 	# Install the old object if enabled.
+ 	if test "$build_old_libs" = yes; then
+ 	  # Deduce the name of the old-style object file.
+-	  func_lo2o "$file"
+-	  staticobj=$func_lo2o_result
++	  staticobj=`$ECHO "X$file" | $Xsed -e "$lo2o"`
+ 	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ 	fi
+ 	exit $EXIT_SUCCESS
+@@ -2588,3330 +2582,3377 @@ func_mode_install ()
+     fi
+ }
+ 
+-test "$mode" = install && func_mode_install ${1+"$@"}
+ 
+-
+-# func_emit_libtool_wrapper_script
+-# emit a libtool wrapper script on stdout
+-# don't directly open a file because we may want to
+-# incorporate the script contents within a cygwin/mingw
+-# wrapper executable.  Must ONLY be called from within
+-# func_mode_link because it depends on a number of variable
+-# set therein.
+-func_emit_libtool_wrapper_script ()
++# func_mode_link arg...
++func_mode_link ()
+ {
+-	$ECHO "\
+-#! $SHELL
++    $opt_debug
++    case $host in
++    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++      # It is impossible to link a dll without this setting, and
++      # we shouldn't force the makefile maintainer to figure out
++      # which system we are compiling for in order to pass an extra
++      # flag for every libtool invocation.
++      # allow_undefined=no
+ 
+-# $output - temporary wrapper script for $objdir/$outputname
+-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+-#
+-# The $output program cannot be directly executed until all the libtool
+-# libraries that it depends on are installed.
+-#
+-# This wrapper script should never be moved out of the build directory.
+-# If it is, it will not operate correctly.
++      # FIXME: Unfortunately, there are problems with the above when trying
++      # to make a dll which has undefined symbols, in which case not
++      # even a static library is built.  For now, we need to specify
++      # -no-undefined on the libtool link line when we can be certain
++      # that all symbols are satisfied, otherwise we get a static library.
++      allow_undefined=yes
++      ;;
++    *)
++      allow_undefined=yes
++      ;;
++    esac
++    libtool_args="$nonopt"
++    base_compile="$nonopt $@"
++    compile_command="$nonopt"
++    finalize_command="$nonopt"
+ 
+-# Sed substitution that helps us do robust quoting.  It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-Xsed='${SED} -e 1s/^X//'
+-sed_quote_subst='$sed_quote_subst'
++    compile_rpath=
++    finalize_rpath=
++    compile_shlibpath=
++    finalize_shlibpath=
++    convenience=
++    old_convenience=
++    deplibs=
++    old_deplibs=
++    compiler_flags=
++    linker_flags=
++    dllsearchpath=
++    lib_search_path=`pwd`
++    inst_prefix_dir=
++    new_inherited_linker_flags=
+ 
+-# Be Bourne compatible
+-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+-  emulate sh
+-  NULLCMD=:
+-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+-  # is contrary to our usage.  Disable this feature.
+-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+-  setopt NO_GLOB_SUBST
+-else
+-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+-fi
+-BIN_SH=xpg4; export BIN_SH # for Tru64
+-DUALCASE=1; export DUALCASE # for MKS sh
++    avoid_version=no
++    dlfiles=
++    dlprefiles=
++    dlself=no
++    export_dynamic=no
++    export_symbols=
++    export_symbols_regex=
++    generated=
++    libobjs=
++    ltlibs=
++    module=no
++    no_install=no
++    objs=
++    non_pic_objects=
++    precious_files_regex=
++    prefer_static_libs=no
++    preload=no
++    prev=
++    prevarg=
++    release=
++    rpath=
++    xrpath=
++    perm_rpath=
++    temp_rpath=
++    thread_safe=no
++    vinfo=
++    vinfo_number=no
++    weak_libs=
++    single_module="${wl}-single_module"
++    func_infer_tag $base_compile
+ 
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++    # We need to know -static, to get the right output filenames.
++    for arg
++    do
++      case $arg in
++      -shared)
++	test "$build_libtool_libs" != yes && \
++	  func_fatal_configuration "can not build a shared library"
++	build_old_libs=no
++	break
++	;;
++      -all-static | -static)
++	if test "X$arg" = "X-all-static"; then
++	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
++	    func_warning "complete static linking is impossible in this configuration"
++	  fi
++	  if test -n "$link_static_flag"; then
++	    dlopen_self=$dlopen_self_static
++	    # See comment for -static flag below, for more details.
++	    compile_command="$compile_command $link_static_flag"
++	    finalize_command="$finalize_command $link_static_flag"
++	  fi
++	  prefer_static_libs=yes
++	else
++	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
++	    dlopen_self=$dlopen_self_static
++	  fi
++	  prefer_static_libs=built
++	fi
++	build_libtool_libs=no
++	build_old_libs=yes
++	break
++	;;
++      esac
++    done
+ 
+-relink_command=\"$relink_command\"
++    # See if our shared archives depend on static archives.
++    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+ 
+-# This environment variable determines our operation mode.
+-if test \"\$libtool_install_magic\" = \"$magic\"; then
+-  # install mode needs the following variables:
+-  generated_by_libtool_version='$macro_version'
+-  notinst_deplibs='$notinst_deplibs'
+-else
+-  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+-    ECHO=\"$qecho\"
+-    file=\"\$0\"
+-    # Make sure echo works.
+-    if test \"X\$1\" = X--no-reexec; then
+-      # Discard the --no-reexec flag, and continue.
++    # Go through the arguments, transforming them on the way.
++    while test "$#" -gt 0; do
++      arg="$1"
+       shift
+-    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+-      # Yippee, \$ECHO works!
+-      :
+-    else
+-      # Restart under the correct shell, and then maybe \$ECHO will work.
+-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+-    fi
+-  fi\
+-"
+-	$ECHO "\
+-
+-  # Find the directory that this script lives in.
+-  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+-
+-  # Follow symbolic links until we get to the real thisdir.
+-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+-  while test -n \"\$file\"; do
+-    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+-
+-    # If there was a directory component, then change thisdir.
+-    if test \"x\$destdir\" != \"x\$file\"; then
+-      case \"\$destdir\" in
+-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+-      *) thisdir=\"\$thisdir/\$destdir\" ;;
+-      esac
+-    fi
+-
+-    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+-  done
+-
+-  # Try to get the absolute directory name.
+-  absdir=\`cd \"\$thisdir\" && pwd\`
+-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+-"
+-
+-	if test "$fast_install" = yes; then
+-	  $ECHO "\
+-  program=lt-'$outputname'$exeext
+-  progdir=\"\$thisdir/$objdir\"
++      func_quote_for_eval "$arg"
++      qarg="$func_quote_for_eval_unquoted_result"
++      libtool_args="$libtool_args $func_quote_for_eval_result"
+ 
+-  if test ! -f \"\$progdir/\$program\" ||
+-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
++      # If the previous option needs an argument, assign it.
++      if test -n "$prev"; then
++	case $prev in
++	output)
++	  compile_command="$compile_command @OUTPUT@"
++	  finalize_command="$finalize_command @OUTPUT@"
++	  ;;
++	esac
+ 
+-    file=\"\$\$-\$program\"
++	case $prev in
++	dlfiles|dlprefiles)
++	  if test "$preload" = no; then
++	    # Add the symbol object into the linking commands.
++	    compile_command="$compile_command @SYMFILE@"
++	    finalize_command="$finalize_command @SYMFILE@"
++	    preload=yes
++	  fi
++	  case $arg in
++	  *.la | *.lo) ;;  # We handle these cases below.
++	  force)
++	    if test "$dlself" = no; then
++	      dlself=needless
++	      export_dynamic=yes
++	    fi
++	    prev=
++	    continue
++	    ;;
++	  self)
++	    if test "$prev" = dlprefiles; then
++	      dlself=yes
++	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
++	      dlself=yes
++	    else
++	      dlself=needless
++	      export_dynamic=yes
++	    fi
++	    prev=
++	    continue
++	    ;;
++	  *)
++	    if test "$prev" = dlfiles; then
++	      dlfiles="$dlfiles $arg"
++	    else
++	      dlprefiles="$dlprefiles $arg"
++	    fi
++	    prev=
++	    continue
++	    ;;
++	  esac
++	  ;;
++	expsyms)
++	  export_symbols="$arg"
++	  test -f "$arg" \
++	    || func_fatal_error "symbol file \`$arg' does not exist"
++	  prev=
++	  continue
++	  ;;
++	expsyms_regex)
++	  export_symbols_regex="$arg"
++	  prev=
++	  continue
++	  ;;
++	framework)
++	  case $host in
++	    *-*-darwin*)
++	      case "$deplibs " in
++		*" $qarg.ltframework "*) ;;
++		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
++		   ;;
++	      esac
++	      ;;
++   	  esac
++	  prev=
++	  continue
++	  ;;
++	inst_prefix)
++	  inst_prefix_dir="$arg"
++	  prev=
++	  continue
++	  ;;
++	objectlist)
++	  if test -f "$arg"; then
++	    save_arg=$arg
++	    moreargs=
++	    for fil in `cat "$save_arg"`
++	    do
++#	      moreargs="$moreargs $fil"
++	      arg=$fil
++	      # A libtool-controlled object.
+ 
+-    if test ! -d \"\$progdir\"; then
+-      $MKDIR \"\$progdir\"
+-    else
+-      $RM \"\$progdir/\$file\"
+-    fi"
++	      # Check to see that this really is a libtool object.
++	      if func_lalib_unsafe_p "$arg"; then
++		pic_object=
++		non_pic_object=
+ 
+-	  $ECHO "\
++		# Read the .lo file
++		func_source "$arg"
+ 
+-    # relink executable if necessary
+-    if test -n \"\$relink_command\"; then
+-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+-      else
+-	$ECHO \"\$relink_command_output\" >&2
+-	$RM \"\$progdir/\$file\"
+-	exit 1
+-      fi
+-    fi
++		if test -z "$pic_object" ||
++		   test -z "$non_pic_object" ||
++		   test "$pic_object" = none &&
++		   test "$non_pic_object" = none; then
++		  func_fatal_error "cannot find name of object for \`$arg'"
++		fi
+ 
+-    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+-    { $RM \"\$progdir/\$program\";
+-      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+-    $RM \"\$progdir/\$file\"
+-  fi"
+-	else
+-	  $ECHO "\
+-  program='$outputname'
+-  progdir=\"\$thisdir/$objdir\"
+-"
+-	fi
++		# Extract subdirectory from the argument.
++		func_dirname "$arg" "/" ""
++		xdir="$func_dirname_result"
+ 
+-	$ECHO "\
++		if test "$pic_object" != none; then
++		  # Prepend the subdirectory the object is found in.
++		  pic_object="$xdir$pic_object"
+ 
+-  if test -f \"\$progdir/\$program\"; then"
++		  if test "$prev" = dlfiles; then
++		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++		      dlfiles="$dlfiles $pic_object"
++		      prev=
++		      continue
++		    else
++		      # If libtool objects are unsupported, then we need to preload.
++		      prev=dlprefiles
++		    fi
++		  fi
+ 
+-	# Export our shlibpath_var if we have one.
+-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+-	  $ECHO "\
+-    # Add our own library path to $shlibpath_var
+-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
++		  # CHECK ME:  I think I busted this.  -Ossama
++		  if test "$prev" = dlprefiles; then
++		    # Preload the old-style object.
++		    dlprefiles="$dlprefiles $pic_object"
++		    prev=
++		  fi
+ 
+-    # Some systems cannot cope with colon-terminated $shlibpath_var
+-    # The second colon is a workaround for a bug in BeOS R4 sed
+-    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
++		  # A PIC object.
++		  libobjs="$libobjs $pic_object"
++		  arg="$pic_object"
++		fi
+ 
+-    export $shlibpath_var
+-"
+-	fi
++		# Non-PIC object.
++		if test "$non_pic_object" != none; then
++		  # Prepend the subdirectory the object is found in.
++		  non_pic_object="$xdir$non_pic_object"
+ 
+-	# fixup the dll searchpath if we need to.
+-	if test -n "$dllsearchpath"; then
+-	  $ECHO "\
+-    # Add the dll search path components to the executable PATH
+-    PATH=$dllsearchpath:\$PATH
+-"
+-	fi
++		  # A standard non-PIC object
++		  non_pic_objects="$non_pic_objects $non_pic_object"
++		  if test -z "$pic_object" || test "$pic_object" = none ; then
++		    arg="$non_pic_object"
++		  fi
++		else
++		  # If the PIC object exists, use it instead.
++		  # $xdir was prepended to $pic_object above.
++		  non_pic_object="$pic_object"
++		  non_pic_objects="$non_pic_objects $non_pic_object"
++		fi
++	      else
++		# Only an error if not doing a dry-run.
++		if $opt_dry_run; then
++		  # Extract subdirectory from the argument.
++		  func_dirname "$arg" "/" ""
++		  xdir="$func_dirname_result"
+ 
+-	$ECHO "\
+-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+-      # Run the actual program with our arguments.
+-"
+-	case $host in
+-	# Backslashes separate directories on plain windows
+-	*-*-mingw | *-*-os2*)
+-	  $ECHO "\
+-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+-"
++		  pic_object=`$ECHO "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
++		  non_pic_object=`$ECHO "X${xdir}${arg}" | $Xsed -e "$lo2o"`
++		  libobjs="$libobjs $pic_object"
++		  non_pic_objects="$non_pic_objects $non_pic_object"
++	        else
++		  func_fatal_error "\`$arg' is not a valid libtool object"
++		fi
++	      fi
++	    done
++	  else
++	    func_fatal_error "link input file \`$arg' does not exist"
++	  fi
++	  arg=$save_arg
++	  prev=
++	  continue
++	  ;;
++	precious_regex)
++	  precious_files_regex="$arg"
++	  prev=
++	  continue
++	  ;;
++	release)
++	  release="-$arg"
++	  prev=
++	  continue
++	  ;;
++	rpath | xrpath)
++	  # We need an absolute path.
++	  case $arg in
++	  [\\/]* | [A-Za-z]:[\\/]*) ;;
++	  *)
++	    func_fatal_error "only absolute run-paths are allowed"
++	    ;;
++	  esac
++	  if test "$prev" = rpath; then
++	    case "$rpath " in
++	    *" $arg "*) ;;
++	    *) rpath="$rpath $arg" ;;
++	    esac
++	  else
++	    case "$xrpath " in
++	    *" $arg "*) ;;
++	    *) xrpath="$xrpath $arg" ;;
++	    esac
++	  fi
++	  prev=
++	  continue
++	  ;;
++	shrext)
++  	  shrext_cmds="$arg"
++	  prev=
++	  continue
++	  ;;
++	weak)
++	  weak_libs="$weak_libs $arg"
++	  prev=
++	  continue
++	  ;;
++	xcclinker)
++	  linker_flags="$linker_flags $qarg"
++	  compiler_flags="$compiler_flags $qarg"
++	  prev=
++	  compile_command="$compile_command $qarg"
++	  finalize_command="$finalize_command $qarg"
++	  continue
++	  ;;
++	xcompiler)
++	  compiler_flags="$compiler_flags $qarg"
++	  prev=
++	  compile_command="$compile_command $qarg"
++	  finalize_command="$finalize_command $qarg"
++	  continue
++	  ;;
++	xlinker)
++	  linker_flags="$linker_flags $qarg"
++	  compiler_flags="$compiler_flags $wl$qarg"
++	  prev=
++	  compile_command="$compile_command $wl$qarg"
++	  finalize_command="$finalize_command $wl$qarg"
++	  continue
+ 	  ;;
+-
+ 	*)
+-	  $ECHO "\
+-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+-"
++	  eval "$prev=\"\$arg\""
++	  prev=
++	  continue
+ 	  ;;
+ 	esac
+-	$ECHO "\
+-      \$ECHO \"\$0: cannot exec \$program \$*\"
+-      exit 1
+-    fi
+-  else
+-    # The program doesn't exist.
+-    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+-    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+-    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+-    exit 1
+-  fi
+-fi\
+-"
+-}
+-# end: func_emit_libtool_wrapper_script
+-
+-# func_emit_libtool_cwrapperexe_source
+-# emit the source code for a wrapper executable on stdout
+-# Must ONLY be called from within func_mode_link because
+-# it depends on a number of variable set therein.
+-func_emit_libtool_cwrapperexe_source ()
+-{
+-	cat <<EOF
+-
+-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+-   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+-
+-   The $output program cannot be directly executed until all the libtool
+-   libraries that it depends on are installed.
+-
+-   This wrapper executable should never be moved out of the build directory.
+-   If it is, it will not operate correctly.
+-
+-   Currently, it simply execs the wrapper *script* "/bin/sh $output",
+-   but could eventually absorb all of the scripts functionality and
+-   exec $objdir/$outputname directly.
+-*/
+-EOF
+-	    cat <<"EOF"
+-#include <stdio.h>
+-#include <stdlib.h>
+-#include <unistd.h>
+-#include <malloc.h>
+-#include <stdarg.h>
+-#include <assert.h>
+-#include <string.h>
+-#include <ctype.h>
+-#include <sys/stat.h>
++      fi # test -n "$prev"
+ 
+-#if defined(PATH_MAX)
+-# define LT_PATHMAX PATH_MAX
+-#elif defined(MAXPATHLEN)
+-# define LT_PATHMAX MAXPATHLEN
+-#else
+-# define LT_PATHMAX 1024
+-#endif
++      prevarg="$arg"
+ 
+-#ifndef DIR_SEPARATOR
+-# define DIR_SEPARATOR '/'
+-# define PATH_SEPARATOR ':'
+-#endif
++      case $arg in
++      -all-static)
++	# The effects of -all-static are defined in a previous loop.
++	continue
++	;;
+ 
+-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+-  defined (__OS2__)
+-# define HAVE_DOS_BASED_FILE_SYSTEM
+-# ifndef DIR_SEPARATOR_2
+-#  define DIR_SEPARATOR_2 '\\'
+-# endif
+-# ifndef PATH_SEPARATOR_2
+-#  define PATH_SEPARATOR_2 ';'
+-# endif
+-#endif
++      -allow-undefined)
++	# FIXME: remove this flag sometime in the future.
++	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
++	;;
+ 
+-#ifndef DIR_SEPARATOR_2
+-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+-#else /* DIR_SEPARATOR_2 */
+-# define IS_DIR_SEPARATOR(ch) \
+-	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+-#endif /* DIR_SEPARATOR_2 */
++      -avoid-version)
++	avoid_version=yes
++	continue
++	;;
+ 
+-#ifndef PATH_SEPARATOR_2
+-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+-#else /* PATH_SEPARATOR_2 */
+-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+-#endif /* PATH_SEPARATOR_2 */
++      -dlopen)
++	prev=dlfiles
++	continue
++	;;
+ 
+-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+-#define XFREE(stale) do { \
+-  if (stale) { free ((void *) stale); stale = 0; } \
+-} while (0)
++      -dlpreopen)
++	prev=dlprefiles
++	continue
++	;;
+ 
+-/* -DDEBUG is fairly common in CFLAGS.  */
+-#undef DEBUG
+-#if defined DEBUGWRAPPER
+-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+-#else
+-# define DEBUG(format, ...)
+-#endif
++      -export-dynamic)
++	export_dynamic=yes
++	continue
++	;;
+ 
+-const char *program_name = NULL;
++      -export-symbols | -export-symbols-regex)
++	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
++	  func_fatal_error "more than one -exported-symbols argument is not allowed"
++	fi
++	if test "X$arg" = "X-export-symbols"; then
++	  prev=expsyms
++	else
++	  prev=expsyms_regex
++	fi
++	continue
++	;;
+ 
+-void * xmalloc (size_t num);
+-char * xstrdup (const char *string);
+-const char * base_name (const char *name);
+-char * find_executable(const char *wrapper);
+-int    check_executable(const char *path);
+-char * strendzap(char *str, const char *pat);
+-void lt_fatal (const char *message, ...);
++      -framework)
++	prev=framework
++	continue
++	;;
+ 
+-int
+-main (int argc, char *argv[])
+-{
+-  char **newargz;
+-  int i;
++      -inst-prefix-dir)
++	prev=inst_prefix
++	continue
++	;;
+ 
+-  program_name = (char *) xstrdup (base_name (argv[0]));
+-  DEBUG("(main) argv[0]      : %s\n",argv[0]);
+-  DEBUG("(main) program_name : %s\n",program_name);
+-  newargz = XMALLOC(char *, argc+2);
+-EOF
++      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
++      # so, if we see these flags be careful not to treat them like -L
++      -L[A-Z][A-Z]*:*)
++	case $with_gcc/$host in
++	no/*-*-irix* | /*-*-irix*)
++	  compile_command="$compile_command $arg"
++	  finalize_command="$finalize_command $arg"
++	  ;;
++	esac
++	continue
++	;;
+ 
+-	    cat <<EOF
+-  newargz[0] = (char *) xstrdup("$SHELL");
+-EOF
++      -L*)
++	func_stripname '-L' '' "$arg"
++	dir=$func_stripname_result
++	# We need an absolute path.
++	case $dir in
++	[\\/]* | [A-Za-z]:[\\/]*) ;;
++	*)
++	  absdir=`cd "$dir" && pwd`
++	  test -z "$absdir" && \
++	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
++	  dir="$absdir"
++	  ;;
++	esac
++	case "$deplibs " in
++	*" -L$dir "*) ;;
++	*)
++	  deplibs="$deplibs -L$dir"
++	  lib_search_path="$lib_search_path $dir"
++	  ;;
++	esac
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
++	  case :$dllsearchpath: in
++	  *":$dir:"*) ;;
++	  *) dllsearchpath="$dllsearchpath:$dir";;
++	  esac
++	  case :$dllsearchpath: in
++	  *":$testbindir:"*) ;;
++	  *) dllsearchpath="$dllsearchpath:$testbindir";;
++	  esac
++	  ;;
++	esac
++	continue
++	;;
+ 
+-	    cat <<"EOF"
+-  newargz[1] = find_executable(argv[0]);
+-  if (newargz[1] == NULL)
+-    lt_fatal("Couldn't find %s", argv[0]);
+-  DEBUG("(main) found exe at : %s\n",newargz[1]);
+-  /* we know the script has the same name, without the .exe */
+-  /* so make sure newargz[1] doesn't end in .exe */
+-  strendzap(newargz[1],".exe");
+-  for (i = 1; i < argc; i++)
+-    newargz[i+1] = xstrdup(argv[i]);
+-  newargz[argc+1] = NULL;
++      -l*)
++	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
++	  case $host in
++	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
++	    # These systems don't actually have a C or math library (as such)
++	    continue
++	    ;;
++	  *-*-os2*)
++	    # These systems don't actually have a C library (as such)
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	    # Do not include libc due to us having libc/libc_r.
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-rhapsody* | *-*-darwin1.[012])
++	    # Rhapsody C and math libraries are in the System framework
++	    deplibs="$deplibs System.ltframework"
++	    continue
++	    ;;
++	  *-*-sco3.2v5* | *-*-sco5v6*)
++	    # Causes problems with __ctype
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++	    # Compiler inserts libc in the correct place for threads to work
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  esac
++	elif test "X$arg" = "X-lc_r"; then
++	 case $host in
++	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	   # Do not include libc_r directly, use -pthread flag.
++	   continue
++	   ;;
++	 esac
++	fi
++	deplibs="$deplibs $arg"
++	continue
++	;;
+ 
+-  for (i=0; i<argc+1; i++)
+-  {
+-    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
+-    ;
+-  }
++      -module)
++	module=yes
++	continue
++	;;
+ 
+-EOF
++      # Tru64 UNIX uses -model [arg] to determine the layout of C++
++      # classes, name mangling, and exception handling.
++      # Darwin uses the -arch flag to determine output architecture.
++      -model|-arch|-isysroot)
++	compile_command="$compile_command $arg"
++	compiler_flags="$compiler_flags $arg"
++	finalize_command="$finalize_command $arg"
++	prev=xcompiler
++	continue
++	;;
+ 
+-	    case $host_os in
+-	      mingw*)
+-		cat <<EOF
+-  execv("$SHELL",(char const **)newargz);
+-EOF
+-	      ;;
+-	      *)
+-		cat <<EOF
+-  execv("$SHELL",newargz);
+-EOF
+-	      ;;
+-	    esac
++      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
++	compiler_flags="$compiler_flags $arg"
++	compile_command="$compile_command $arg"
++	finalize_command="$finalize_command $arg"
++	case "$new_inherited_linker_flags " in
++	    *" $arg "*) ;;
++	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
++	esac
++	continue
++	;;
+ 
+-	    cat <<"EOF"
+-  return 127;
+-}
++      -multi_module)
++	single_module="${wl}-multi_module"
++	continue
++	;;
+ 
+-void *
+-xmalloc (size_t num)
+-{
+-  void * p = (void *) malloc (num);
+-  if (!p)
+-    lt_fatal ("Memory exhausted");
++      -no-fast-install)
++	fast_install=no
++	continue
++	;;
+ 
+-  return p;
+-}
++      -no-install)
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++	  # The PATH hackery in wrapper scripts is required on Windows
++	  # in order for the loader to find any dlls it needs.
++	  func_warning "\`-no-install' is ignored for $host"
++	  func_warning "assuming \`-no-fast-install' instead"
++	  fast_install=no
++	  ;;
++	*) no_install=yes ;;
++	esac
++	continue
++	;;
+ 
+-char *
+-xstrdup (const char *string)
+-{
+-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+-;
+-}
++      -no-undefined)
++	allow_undefined=no
++	continue
++	;;
+ 
+-const char *
+-base_name (const char *name)
+-{
+-  const char *base;
++      -objectlist)
++	prev=objectlist
++	continue
++	;;
+ 
+-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+-  /* Skip over the disk name in MSDOS pathnames. */
+-  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
+-    name += 2;
+-#endif
++      -o) prev=output ;;
+ 
+-  for (base = name; *name; name++)
+-    if (IS_DIR_SEPARATOR (*name))
+-      base = name + 1;
+-  return base;
+-}
++      -precious-files-regex)
++	prev=precious_regex
++	continue
++	;;
+ 
+-int
+-check_executable(const char * path)
+-{
+-  struct stat st;
++      -release)
++	prev=release
++	continue
++	;;
+ 
+-  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+-  if ((!path) || (!*path))
+-    return 0;
++      -rpath)
++	prev=rpath
++	continue
++	;;
+ 
+-  if ((stat (path, &st) >= 0) &&
+-      (
+-	/* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+-#if defined (S_IXOTH)
+-       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+-#endif
+-#if defined (S_IXGRP)
+-       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+-#endif
+-       ((st.st_mode & S_IXUSR) == S_IXUSR))
+-      )
+-    return 1;
+-  else
+-    return 0;
+-}
++      -R)
++	prev=xrpath
++	continue
++	;;
+ 
+-/* Searches for the full path of the wrapper.  Returns
+-   newly allocated full path name if found, NULL otherwise */
+-char *
+-find_executable (const char* wrapper)
+-{
+-  int has_slash = 0;
+-  const char* p;
+-  const char* p_next;
+-  /* static buffer for getcwd */
+-  char tmp[LT_PATHMAX + 1];
+-  int tmp_len;
+-  char* concat_name;
++      -R*)
++	func_stripname '-R' '' "$arg"
++	dir=$func_stripname_result
++	# We need an absolute path.
++	case $dir in
++	[\\/]* | [A-Za-z]:[\\/]*) ;;
++	*)
++	  func_fatal_error "only absolute run-paths are allowed"
++	  ;;
++	esac
++	case "$xrpath " in
++	*" $dir "*) ;;
++	*) xrpath="$xrpath $dir" ;;
++	esac
++	continue
++	;;
+ 
+-  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
++      -shared)
++	# The effects of -shared are defined in a previous loop.
++	continue
++	;;
+ 
+-  if ((wrapper == NULL) || (*wrapper == '\0'))
+-    return NULL;
++      -shrext)
++	prev=shrext
++	continue
++	;;
+ 
+-  /* Absolute path? */
+-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+-  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+-  {
+-    concat_name = xstrdup (wrapper);
+-    if (check_executable(concat_name))
+-      return concat_name;
+-    XFREE(concat_name);
+-  }
+-  else
+-  {
+-#endif
+-    if (IS_DIR_SEPARATOR (wrapper[0]))
+-    {
+-      concat_name = xstrdup (wrapper);
+-      if (check_executable(concat_name))
+-	return concat_name;
+-      XFREE(concat_name);
+-    }
+-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+-  }
+-#endif
++      -static)
++	# The effects of -static are defined in a previous loop.
++	# We used to do the same as -all-static on platforms that
++	# didn't have a PIC flag, but the assumption that the effects
++	# would be equivalent was wrong.  It would break on at least
++	# Digital Unix and AIX.
++	continue
++	;;
+ 
+-  for (p = wrapper; *p; p++)
+-    if (*p == '/')
+-    {
+-      has_slash = 1;
+-      break;
+-    }
+-  if (!has_slash)
+-  {
+-    /* no slashes; search PATH */
+-    const char* path = getenv ("PATH");
+-    if (path != NULL)
+-    {
+-      for (p = path; *p; p = p_next)
+-      {
+-	const char* q;
+-	size_t p_len;
+-	for (q = p; *q; q++)
+-	  if (IS_PATH_SEPARATOR(*q))
+-	    break;
+-	p_len = q - p;
+-	p_next = (*q == '\0' ? q : q + 1);
+-	if (p_len == 0)
+-	{
+-	  /* empty path: current directory */
+-	  if (getcwd (tmp, LT_PATHMAX) == NULL)
+-	    lt_fatal ("getcwd failed");
+-	  tmp_len = strlen(tmp);
+-	  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+-	  memcpy (concat_name, tmp, tmp_len);
+-	  concat_name[tmp_len] = '/';
+-	  strcpy (concat_name + tmp_len + 1, wrapper);
+-	}
+-	else
+-	{
+-	  concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+-	  memcpy (concat_name, p, p_len);
+-	  concat_name[p_len] = '/';
+-	  strcpy (concat_name + p_len + 1, wrapper);
+-	}
+-	if (check_executable(concat_name))
+-	  return concat_name;
+-	XFREE(concat_name);
+-      }
+-    }
+-    /* not found in PATH; assume curdir */
+-  }
+-  /* Relative path | not found in path: prepend cwd */
+-  if (getcwd (tmp, LT_PATHMAX) == NULL)
+-    lt_fatal ("getcwd failed");
+-  tmp_len = strlen(tmp);
+-  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+-  memcpy (concat_name, tmp, tmp_len);
+-  concat_name[tmp_len] = '/';
+-  strcpy (concat_name + tmp_len + 1, wrapper);
++      -thread-safe)
++	thread_safe=yes
++	continue
++	;;
+ 
+-  if (check_executable(concat_name))
+-    return concat_name;
+-  XFREE(concat_name);
+-  return NULL;
+-}
++      -version-info)
++	prev=vinfo
++	continue
++	;;
+ 
+-char *
+-strendzap(char *str, const char *pat)
+-{
+-  size_t len, patlen;
++      -version-number)
++	prev=vinfo
++	vinfo_number=yes
++	continue
++	;;
+ 
+-  assert(str != NULL);
+-  assert(pat != NULL);
++      -weak)
++        prev=weak
++	continue
++	;;
+ 
+-  len = strlen(str);
+-  patlen = strlen(pat);
++      -Wc,*)
++	func_stripname '-Wc,' '' "$arg"
++	args=$func_stripname_result
++	arg=
++	save_ifs="$IFS"; IFS=','
++	for flag in $args; do
++	  IFS="$save_ifs"
++          func_quote_for_eval "$flag"
++	  arg="$arg $wl$func_quote_for_eval_result"
++	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
++	done
++	IFS="$save_ifs"
++	func_stripname ' ' '' "$arg"
++	arg=$func_stripname_result
++	;;
+ 
+-  if (patlen <= len)
+-  {
+-    str += len - patlen;
+-    if (strcmp(str, pat) == 0)
+-      *str = '\0';
+-  }
+-  return str;
+-}
++      -Wl,*)
++	func_stripname '-Wl,' '' "$arg"
++	args=$func_stripname_result
++	arg=
++	save_ifs="$IFS"; IFS=','
++	for flag in $args; do
++	  IFS="$save_ifs"
++          func_quote_for_eval "$flag"
++	  arg="$arg $wl$func_quote_for_eval_result"
++	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
++	  linker_flags="$linker_flags $func_quote_for_eval_result"
++	done
++	IFS="$save_ifs"
++	func_stripname ' ' '' "$arg"
++	arg=$func_stripname_result
++	;;
+ 
+-static void
+-lt_error_core (int exit_status, const char * mode,
+-	  const char * message, va_list ap)
+-{
+-  fprintf (stderr, "%s: %s: ", program_name, mode);
+-  vfprintf (stderr, message, ap);
+-  fprintf (stderr, ".\n");
++      -Xcompiler)
++	prev=xcompiler
++	continue
++	;;
+ 
+-  if (exit_status >= 0)
+-    exit (exit_status);
+-}
++      -Xlinker)
++	prev=xlinker
++	continue
++	;;
+ 
+-void
+-lt_fatal (const char *message, ...)
+-{
+-  va_list ap;
+-  va_start (ap, message);
+-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+-  va_end (ap);
+-}
+-EOF
+-}
+-# end: func_emit_libtool_cwrapperexe_source
++      -XCClinker)
++	prev=xcclinker
++	continue
++	;;
+ 
+-# func_mode_link arg...
+-func_mode_link ()
+-{
+-    $opt_debug
+-    case $host in
+-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-      # It is impossible to link a dll without this setting, and
+-      # we shouldn't force the makefile maintainer to figure out
+-      # which system we are compiling for in order to pass an extra
+-      # flag for every libtool invocation.
+-      # allow_undefined=no
++      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
++      # -r[0-9][0-9]* specifies the processor on the SGI compiler
++      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
++      # +DA*, +DD* enable 64-bit mode on the HP compiler
++      # -q* pass through compiler args for the IBM compiler
++      # -m*, -t[45]*, -txscale* pass through architecture-specific
++      # compiler args for GCC
++      # @file GCC response files
++      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
++      -t[45]*|-txscale*|@*)
++        func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++        compile_command="$compile_command $arg"
++        finalize_command="$finalize_command $arg"
++        compiler_flags="$compiler_flags $arg"
++        continue
++        ;;
+ 
+-      # FIXME: Unfortunately, there are problems with the above when trying
+-      # to make a dll which has undefined symbols, in which case not
+-      # even a static library is built.  For now, we need to specify
+-      # -no-undefined on the libtool link line when we can be certain
+-      # that all symbols are satisfied, otherwise we get a static library.
+-      allow_undefined=yes
+-      ;;
+-    *)
+-      allow_undefined=yes
+-      ;;
+-    esac
+-    libtool_args=$nonopt
+-    base_compile="$nonopt $@"
+-    compile_command=$nonopt
+-    finalize_command=$nonopt
++      # Some other compiler flag.
++      -* | +*)
++        func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++	;;
+ 
+-    compile_rpath=
+-    finalize_rpath=
+-    compile_shlibpath=
+-    finalize_shlibpath=
+-    convenience=
+-    old_convenience=
+-    deplibs=
+-    old_deplibs=
+-    compiler_flags=
+-    linker_flags=
+-    dllsearchpath=
+-    lib_search_path=`pwd`
+-    inst_prefix_dir=
+-    new_inherited_linker_flags=
++      *.$objext)
++	# A standard object.
++	objs="$objs $arg"
++	;;
+ 
+-    avoid_version=no
+-    dlfiles=
+-    dlprefiles=
+-    dlself=no
+-    export_dynamic=no
+-    export_symbols=
+-    export_symbols_regex=
+-    generated=
+-    libobjs=
+-    ltlibs=
+-    module=no
+-    no_install=no
+-    objs=
+-    non_pic_objects=
+-    precious_files_regex=
+-    prefer_static_libs=no
+-    preload=no
+-    prev=
+-    prevarg=
+-    release=
+-    rpath=
+-    xrpath=
+-    perm_rpath=
+-    temp_rpath=
+-    thread_safe=no
+-    vinfo=
+-    vinfo_number=no
+-    weak_libs=
+-    single_module="${wl}-single_module"
+-    func_infer_tag $base_compile
++      *.lo)
++	# A libtool-controlled object.
+ 
+-    # We need to know -static, to get the right output filenames.
+-    for arg
+-    do
+-      case $arg in
+-      -shared)
+-	test "$build_libtool_libs" != yes && \
+-	  func_fatal_configuration "can not build a shared library"
+-	build_old_libs=no
+-	break
+-	;;
+-      -all-static | -static | -static-libtool-libs)
+-	case $arg in
+-	-all-static)
+-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+-	    func_warning "complete static linking is impossible in this configuration"
+-	  fi
+-	  if test -n "$link_static_flag"; then
+-	    dlopen_self=$dlopen_self_static
+-	    # See comment for -static flag below, for more details.
+-	    func_append compile_command " $link_static_flag"
+-	    func_append finalize_command " $link_static_flag"
+-	  fi
+-	  prefer_static_libs=yes
+-	  ;;
+-	-static)
+-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+-	    dlopen_self=$dlopen_self_static
+-	  fi
+-	  prefer_static_libs=built
+-	  ;;
+-	-static-libtool-libs)
+-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+-	    dlopen_self=$dlopen_self_static
+-	  fi
+-	  prefer_static_libs=yes
+-	  ;;
+-	esac
+-	build_libtool_libs=no
+-	build_old_libs=yes
+-	break
+-	;;
+-      esac
+-    done
++	# Check to see that this really is a libtool object.
++	if func_lalib_unsafe_p "$arg"; then
++	  pic_object=
++	  non_pic_object=
+ 
+-    # See if our shared archives depend on static archives.
+-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
++	  # Read the .lo file
++	  func_source "$arg"
+ 
+-    # Go through the arguments, transforming them on the way.
+-    while test "$#" -gt 0; do
+-      arg="$1"
+-      shift
+-      func_quote_for_eval "$arg"
+-      qarg=$func_quote_for_eval_unquoted_result
+-      func_append libtool_args " $func_quote_for_eval_result"
++	  if test -z "$pic_object" ||
++	     test -z "$non_pic_object" ||
++	     test "$pic_object" = none &&
++	     test "$non_pic_object" = none; then
++	    func_fatal_error "cannot find name of object for \`$arg'"
++	  fi
+ 
+-      # If the previous option needs an argument, assign it.
+-      if test -n "$prev"; then
+-	case $prev in
+-	output)
+-	  func_append compile_command " @OUTPUT@"
+-	  func_append finalize_command " @OUTPUT@"
+-	  ;;
+-	esac
++	  # Extract subdirectory from the argument.
++	  func_dirname "$arg" "/" ""
++	  xdir="$func_dirname_result"
+ 
+-	case $prev in
+-	dlfiles|dlprefiles)
+-	  if test "$preload" = no; then
+-	    # Add the symbol object into the linking commands.
+-	    func_append compile_command " @SYMFILE@"
+-	    func_append finalize_command " @SYMFILE@"
+-	    preload=yes
+-	  fi
+-	  case $arg in
+-	  *.la | *.lo) ;;  # We handle these cases below.
+-	  force)
+-	    if test "$dlself" = no; then
+-	      dlself=needless
+-	      export_dynamic=yes
++	  if test "$pic_object" != none; then
++	    # Prepend the subdirectory the object is found in.
++	    pic_object="$xdir$pic_object"
++
++	    if test "$prev" = dlfiles; then
++	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++		dlfiles="$dlfiles $pic_object"
++		prev=
++		continue
++	      else
++		# If libtool objects are unsupported, then we need to preload.
++		prev=dlprefiles
++	      fi
+ 	    fi
+-	    prev=
+-	    continue
+-	    ;;
+-	  self)
++
++	    # CHECK ME:  I think I busted this.  -Ossama
+ 	    if test "$prev" = dlprefiles; then
+-	      dlself=yes
+-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+-	      dlself=yes
+-	    else
+-	      dlself=needless
+-	      export_dynamic=yes
++	      # Preload the old-style object.
++	      dlprefiles="$dlprefiles $pic_object"
++	      prev=
+ 	    fi
+-	    prev=
+-	    continue
+-	    ;;
+-	  *)
+-	    if test "$prev" = dlfiles; then
+-	      dlfiles="$dlfiles $arg"
+-	    else
+-	      dlprefiles="$dlprefiles $arg"
++
++	    # A PIC object.
++	    libobjs="$libobjs $pic_object"
++	    arg="$pic_object"
++	  fi
++
++	  # Non-PIC object.
++	  if test "$non_pic_object" != none; then
++	    # Prepend the subdirectory the object is found in.
++	    non_pic_object="$xdir$non_pic_object"
++
++	    # A standard non-PIC object
++	    non_pic_objects="$non_pic_objects $non_pic_object"
++	    if test -z "$pic_object" || test "$pic_object" = none ; then
++	      arg="$non_pic_object"
+ 	    fi
+-	    prev=
+-	    continue
+-	    ;;
+-	  esac
+-	  ;;
+-	expsyms)
+-	  export_symbols="$arg"
+-	  test -f "$arg" \
+-	    || func_fatal_error "symbol file \`$arg' does not exist"
+-	  prev=
+-	  continue
+-	  ;;
+-	expsyms_regex)
+-	  export_symbols_regex="$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	framework)
+-	  case $host in
+-	    *-*-darwin*)
+-	      case "$deplibs " in
+-		*" $qarg.ltframework "*) ;;
+-		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+-		   ;;
+-	      esac
+-	      ;;
+-   	  esac
+-	  prev=
+-	  continue
+-	  ;;
+-	inst_prefix)
+-	  inst_prefix_dir="$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	objectlist)
+-	  if test -f "$arg"; then
+-	    save_arg=$arg
+-	    moreargs=
+-	    for fil in `cat "$save_arg"`
+-	    do
+-#	      moreargs="$moreargs $fil"
+-	      arg=$fil
+-	      # A libtool-controlled object.
++	  else
++	    # If the PIC object exists, use it instead.
++	    # $xdir was prepended to $pic_object above.
++	    non_pic_object="$pic_object"
++	    non_pic_objects="$non_pic_objects $non_pic_object"
++	  fi
++	else
++	  # Only an error if not doing a dry-run.
++	  if $opt_dry_run; then
++	    # Extract subdirectory from the argument.
++	    func_dirname "$arg" "/" ""
++	    xdir="$func_dirname_result"
+ 
+-	      # Check to see that this really is a libtool object.
+-	      if func_lalib_unsafe_p "$arg"; then
+-		pic_object=
+-		non_pic_object=
++	    pic_object=`$ECHO "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
++	    non_pic_object=`$ECHO "X${xdir}${arg}" | $Xsed -e "$lo2o"`
++	    libobjs="$libobjs $pic_object"
++	    non_pic_objects="$non_pic_objects $non_pic_object"
++	  else
++	    func_fatal_error "\`$arg' is not a valid libtool object"
++	  fi
++	fi
++	;;
+ 
+-		# Read the .lo file
+-		func_source "$arg"
++      *.$libext)
++	# An archive.
++	deplibs="$deplibs $arg"
++	old_deplibs="$old_deplibs $arg"
++	continue
++	;;
+ 
+-		if test -z "$pic_object" ||
+-		   test -z "$non_pic_object" ||
+-		   test "$pic_object" = none &&
+-		   test "$non_pic_object" = none; then
+-		  func_fatal_error "cannot find name of object for \`$arg'"
+-		fi
++      *.la)
++	# A libtool-controlled library.
+ 
+-		# Extract subdirectory from the argument.
+-		func_dirname "$arg" "/" ""
+-		xdir="$func_dirname_result"
++	if test "$prev" = dlfiles; then
++	  # This library was specified with -dlopen.
++	  dlfiles="$dlfiles $arg"
++	  prev=
++	elif test "$prev" = dlprefiles; then
++	  # The library was specified with -dlpreopen.
++	  dlprefiles="$dlprefiles $arg"
++	  prev=
++	else
++	  deplibs="$deplibs $arg"
++	fi
++	continue
++	;;
+ 
+-		if test "$pic_object" != none; then
+-		  # Prepend the subdirectory the object is found in.
+-		  pic_object="$xdir$pic_object"
++      # Some other compiler argument.
++      *)
++	# Unknown arguments in both finalize_command and compile_command need
++	# to be aesthetically quoted because they are evaled later.
++	func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++	;;
++      esac # arg
+ 
+-		  if test "$prev" = dlfiles; then
+-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+-		      dlfiles="$dlfiles $pic_object"
+-		      prev=
+-		      continue
+-		    else
+-		      # If libtool objects are unsupported, then we need to preload.
+-		      prev=dlprefiles
+-		    fi
+-		  fi
++      # Now actually substitute the argument into the commands.
++      if test -n "$arg"; then
++	compile_command="$compile_command $arg"
++	finalize_command="$finalize_command $arg"
++      fi
++    done # argument parsing loop
+ 
+-		  # CHECK ME:  I think I busted this.  -Ossama
+-		  if test "$prev" = dlprefiles; then
+-		    # Preload the old-style object.
+-		    dlprefiles="$dlprefiles $pic_object"
+-		    prev=
+-		  fi
++    test -n "$prev" && \
++      func_fatal_help "the \`$prevarg' option requires an argument"
+ 
+-		  # A PIC object.
+-		  func_append libobjs " $pic_object"
+-		  arg="$pic_object"
+-		fi
++    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
++      eval arg=\"$export_dynamic_flag_spec\"
++      compile_command="$compile_command $arg"
++      finalize_command="$finalize_command $arg"
++    fi
+ 
+-		# Non-PIC object.
+-		if test "$non_pic_object" != none; then
+-		  # Prepend the subdirectory the object is found in.
+-		  non_pic_object="$xdir$non_pic_object"
++    oldlibs=
++    # calculate the name of the file, without its directory
++    func_basename "$output"
++    outputname="$func_basename_result"
++    libobjs_save="$libobjs"
+ 
+-		  # A standard non-PIC object
+-		  func_append non_pic_objects " $non_pic_object"
+-		  if test -z "$pic_object" || test "$pic_object" = none ; then
+-		    arg="$non_pic_object"
+-		  fi
+-		else
+-		  # If the PIC object exists, use it instead.
+-		  # $xdir was prepended to $pic_object above.
+-		  non_pic_object="$pic_object"
+-		  func_append non_pic_objects " $non_pic_object"
+-		fi
+-	      else
+-		# Only an error if not doing a dry-run.
+-		if $opt_dry_run; then
+-		  # Extract subdirectory from the argument.
+-		  func_dirname "$arg" "/" ""
+-		  xdir="$func_dirname_result"
++    if test -n "$shlibpath_var"; then
++      # get the directories listed in $shlibpath_var
++      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
++    else
++      shlib_search_path=
++    fi
++    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
++    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+ 
+-		  func_lo2o "$arg"
+-		  pic_object=$xdir$objdir/$func_lo2o_result
+-		  non_pic_object=$xdir$func_lo2o_result
+-		  func_append libobjs " $pic_object"
+-		  func_append non_pic_objects " $non_pic_object"
+-	        else
+-		  func_fatal_error "\`$arg' is not a valid libtool object"
+-		fi
+-	      fi
+-	    done
+-	  else
+-	    func_fatal_error "link input file \`$arg' does not exist"
+-	  fi
+-	  arg=$save_arg
+-	  prev=
+-	  continue
+-	  ;;
+-	precious_regex)
+-	  precious_files_regex="$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	release)
+-	  release="-$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	rpath | xrpath)
+-	  # We need an absolute path.
+-	  case $arg in
+-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+-	  *)
+-	    func_fatal_error "only absolute run-paths are allowed"
+-	    ;;
+-	  esac
+-	  if test "$prev" = rpath; then
+-	    case "$rpath " in
+-	    *" $arg "*) ;;
+-	    *) rpath="$rpath $arg" ;;
+-	    esac
+-	  else
+-	    case "$xrpath " in
+-	    *" $arg "*) ;;
+-	    *) xrpath="$xrpath $arg" ;;
+-	    esac
+-	  fi
+-	  prev=
+-	  continue
+-	  ;;
+-	shrext)
+-  	  shrext_cmds="$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	weak)
+-	  weak_libs="$weak_libs $arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	xcclinker)
+-	  linker_flags="$linker_flags $qarg"
+-	  compiler_flags="$compiler_flags $qarg"
+-	  prev=
+-	  func_append compile_command " $qarg"
+-	  func_append finalize_command " $qarg"
+-	  continue
+-	  ;;
+-	xcompiler)
+-	  compiler_flags="$compiler_flags $qarg"
+-	  prev=
+-	  func_append compile_command " $qarg"
+-	  func_append finalize_command " $qarg"
+-	  continue
+-	  ;;
+-	xlinker)
+-	  linker_flags="$linker_flags $qarg"
+-	  compiler_flags="$compiler_flags $wl$qarg"
+-	  prev=
+-	  func_append compile_command " $wl$qarg"
+-	  func_append finalize_command " $wl$qarg"
+-	  continue
+-	  ;;
+-	*)
+-	  eval "$prev=\"\$arg\""
+-	  prev=
+-	  continue
+-	  ;;
+-	esac
+-      fi # test -n "$prev"
++    func_dirname "$output" "/" ""
++    output_objdir="$func_dirname_result$objdir"
++    # Create the object directory.
++    func_mkdir_p "$output_objdir"
+ 
+-      prevarg="$arg"
++    # Determine the type of output
++    case $output in
++    "")
++      func_fatal_help "you must specify an output file"
++      ;;
++    *.$libext) linkmode=oldlib ;;
++    *.lo | *.$objext) linkmode=obj ;;
++    *.la) linkmode=lib ;;
++    *) linkmode=prog ;; # Anything else should be a program.
++    esac
+ 
+-      case $arg in
+-      -all-static)
+-	# The effects of -all-static are defined in a previous loop.
+-	continue
+-	;;
++    specialdeplibs=
+ 
+-      -allow-undefined)
+-	# FIXME: remove this flag sometime in the future.
+-	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+-	;;
++    libs=
++    # Find all interdependent deplibs by searching for libraries
++    # that are linked more than once (e.g. -la -lb -la)
++    for deplib in $deplibs; do
++      if $opt_duplicate_deps ; then
++	case "$libs " in
++	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	esac
++      fi
++      libs="$libs $deplib"
++    done
+ 
+-      -avoid-version)
+-	avoid_version=yes
+-	continue
+-	;;
++    if test "$linkmode" = lib; then
++      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+ 
+-      -dlopen)
+-	prev=dlfiles
+-	continue
+-	;;
++      # Compute libraries that are listed more than once in $predeps
++      # $postdeps and mark them as special (i.e., whose duplicates are
++      # not to be eliminated).
++      pre_post_deps=
++      if $opt_duplicate_compiler_generated_deps; then
++	for pre_post_dep in $predeps $postdeps; do
++	  case "$pre_post_deps " in
++	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
++	  esac
++	  pre_post_deps="$pre_post_deps $pre_post_dep"
++	done
++      fi
++      pre_post_deps=
++    fi
+ 
+-      -dlpreopen)
+-	prev=dlprefiles
+-	continue
+-	;;
++    deplibs=
++    newdependency_libs=
++    newlib_search_path=
++    need_relink=no # whether we're linking any uninstalled libtool libraries
++    notinst_deplibs= # not-installed libtool libraries
++    notinst_path= # paths that contain not-installed libtool libraries
+ 
+-      -export-dynamic)
+-	export_dynamic=yes
+-	continue
++    case $linkmode in
++    lib)
++	passes="conv dlpreopen link"
++	for file in $dlfiles $dlprefiles; do
++	  case $file in
++	  *.la) ;;
++	  *)
++	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
++	    ;;
++	  esac
++	done
+ 	;;
+-
+-      -export-symbols | -export-symbols-regex)
+-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+-	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+-	fi
+-	if test "X$arg" = "X-export-symbols"; then
+-	  prev=expsyms
+-	else
+-	  prev=expsyms_regex
+-	fi
+-	continue
++    prog)
++	compile_deplibs=
++	finalize_deplibs=
++	alldeplibs=no
++	newdlfiles=
++	newdlprefiles=
++	passes="conv scan dlopen dlpreopen link"
+ 	;;
+-
+-      -framework)
+-	prev=framework
+-	continue
++    *)  passes="conv"
+ 	;;
++    esac
+ 
+-      -inst-prefix-dir)
+-	prev=inst_prefix
+-	continue
+-	;;
++    for pass in $passes; do
++      # The preopen pass in lib mode reverses $deplibs; put it back here
++      # so that -L comes before libs that need it for instance...
++      if test "$linkmode,$pass" = "lib,link"; then
++	## FIXME: Find the place where the list is rebuilt in the wrong
++	##        order, and fix it there properly
++        tmp_deplibs=
++	for deplib in $deplibs; do
++	  tmp_deplibs="$deplib $tmp_deplibs"
++	done
++	deplibs="$tmp_deplibs"
++      fi
+ 
+-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+-      # so, if we see these flags be careful not to treat them like -L
+-      -L[A-Z][A-Z]*:*)
+-	case $with_gcc/$host in
+-	no/*-*-irix* | /*-*-irix*)
+-	  func_append compile_command " $arg"
+-	  func_append finalize_command " $arg"
++      if test "$linkmode,$pass" = "lib,link" ||
++	 test "$linkmode,$pass" = "prog,scan"; then
++	libs="$deplibs"
++	deplibs=
++      fi
++      if test "$linkmode" = prog; then
++	case $pass in
++	dlopen) libs="$dlfiles" ;;
++	dlpreopen) libs="$dlprefiles" ;;
++	link)
++	  libs="$deplibs %DEPLIBS%"
++	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+ 	  ;;
+ 	esac
+-	continue
+-	;;
++      fi
++      if test "$linkmode,$pass" = "lib,dlpreopen"; then
++	# Collect and forward deplibs of preopened libtool libs
++	for lib in $dlprefiles; do
++	  # Ignore non-libtool-libs
++	  dependency_libs=
++	  case $lib in
++	  *.la)	func_source "$lib" ;;
++	  esac
+ 
+-      -L*)
+-	func_stripname '-L' '' "$arg"
+-	dir=$func_stripname_result
+-	# We need an absolute path.
+-	case $dir in
+-	[\\/]* | [A-Za-z]:[\\/]*) ;;
+-	*)
+-	  absdir=`cd "$dir" && pwd`
+-	  test -z "$absdir" && \
+-	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
+-	  dir="$absdir"
+-	  ;;
+-	esac
+-	case "$deplibs " in
+-	*" -L$dir "*) ;;
+-	*)
+-	  deplibs="$deplibs -L$dir"
+-	  lib_search_path="$lib_search_path $dir"
+-	  ;;
+-	esac
+-	case $host in
+-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+-	  case :$dllsearchpath: in
+-	  *":$dir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$dir";;
+-	  esac
+-	  case :$dllsearchpath: in
+-	  *":$testbindir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+-	  esac
+-	  ;;
+-	esac
+-	continue
+-	;;
++	  # Collect preopened libtool deplibs, except any this library
++	  # has declared as weak libs
++	  for deplib in $dependency_libs; do
++            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
++	    case " $weak_libs " in
++	    *" $deplib_base "*) ;;
++	    *) deplibs="$deplibs $deplib" ;;
++	    esac
++	  done
++	done
++	libs="$dlprefiles"
++      fi
++      if test "$pass" = dlopen; then
++	# Collect dlpreopened libraries
++	save_deplibs="$deplibs"
++	deplibs=
++      fi
+ 
+-      -l*)
+-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+-	  case $host in
+-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+-	    # These systems don't actually have a C or math library (as such)
++      for deplib in $libs; do
++	lib=
++	found=no
++	case $deplib in
++	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
++	  if test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$deplib $compile_deplibs"
++	    finalize_deplibs="$deplib $finalize_deplibs"
++	  else
++	    compiler_flags="$compiler_flags $deplib"
++	    if test "$linkmode" = lib ; then
++		case "$new_inherited_linker_flags " in
++		    *" $deplib "*) ;;
++		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
++		esac
++	    fi
++	  fi
++	  continue
++	  ;;
++	-l*)
++	  if test "$linkmode" != lib && test "$linkmode" != prog; then
++	    func_warning "\`-l' is ignored for archives/objects"
++	    continue
++	  fi
++	  func_stripname '-l' '' "$deplib"
++	  name=$func_stripname_result
++	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
++	    for search_ext in .la $std_shrext .so .a; do
++	      # Search the libtool library
++	      lib="$searchdir/lib${name}${search_ext}"
++	      if test -f "$lib"; then
++		if test "$search_ext" = ".la"; then
++		  found=yes
++		else
++		  found=no
++		fi
++		break 2
++	      fi
++	    done
++	  done
++	  if test "$found" != yes; then
++	    # deplib doesn't seem to be a libtool library
++	    if test "$linkmode,$pass" = "prog,link"; then
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    else
++	      deplibs="$deplib $deplibs"
++	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++	    fi
+ 	    continue
++	  else # deplib is a libtool library
++	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
++	    # We need to do some special things here, and not later.
++	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++	      case " $predeps $postdeps " in
++	      *" $deplib "*)
++		if func_lalib_p "$lib"; then
++		  library_names=
++		  old_library=
++		  func_source "$lib"
++		  for l in $old_library $library_names; do
++		    ll="$l"
++		  done
++		  if test "X$ll" = "X$old_library" ; then # only static version available
++		    found=no
++		    func_dirname "$lib" "" "."
++		    ladir="$func_dirname_result"
++		    lib=$ladir/$old_library
++		    if test "$linkmode,$pass" = "prog,link"; then
++		      compile_deplibs="$deplib $compile_deplibs"
++		      finalize_deplibs="$deplib $finalize_deplibs"
++		    else
++		      deplibs="$deplib $deplibs"
++		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++		    fi
++		    continue
++		  fi
++		fi
++		;;
++	      *) ;;
++	      esac
++	    fi
++	  fi
++	  ;; # -l
++	*.ltframework)
++	  if test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$deplib $compile_deplibs"
++	    finalize_deplibs="$deplib $finalize_deplibs"
++	  else
++	    deplibs="$deplib $deplibs"
++	    if test "$linkmode" = lib ; then
++		case "$new_inherited_linker_flags " in
++		    *" $deplib "*) ;;
++		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
++		esac
++	    fi
++	  fi
++	  continue
++	  ;;
++	-L*)
++	  case $linkmode in
++	  lib)
++	    deplibs="$deplib $deplibs"
++	    test "$pass" = conv && continue
++	    newdependency_libs="$deplib $newdependency_libs"
++	    func_stripname '-L' '' "$deplib"
++	    newlib_search_path="$newlib_search_path $func_stripname_result"
+ 	    ;;
+-	  *-*-os2*)
+-	    # These systems don't actually have a C library (as such)
+-	    test "X$arg" = "X-lc" && continue
++	  prog)
++	    if test "$pass" = conv; then
++	      deplibs="$deplib $deplibs"
++	      continue
++	    fi
++	    if test "$pass" = scan; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    fi
++	    func_stripname '-L' '' "$deplib"
++	    newlib_search_path="$newlib_search_path $func_stripname_result"
+ 	    ;;
+-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+-	    # Do not include libc due to us having libc/libc_r.
+-	    test "X$arg" = "X-lc" && continue
++	  *)
++	    func_warning "\`-L' is ignored for archives/objects"
+ 	    ;;
+-	  *-*-rhapsody* | *-*-darwin1.[012])
+-	    # Rhapsody C and math libraries are in the System framework
+-	    deplibs="$deplibs System.ltframework"
++	  esac # linkmode
++	  continue
++	  ;; # -L
++	-R*)
++	  if test "$pass" = link; then
++	    func_stripname '-R' '' "$deplib"
++	    dir=$func_stripname_result
++	    # Make sure the xrpath contains only unique directories.
++	    case "$xrpath " in
++	    *" $dir "*) ;;
++	    *) xrpath="$xrpath $dir" ;;
++	    esac
++	  fi
++	  deplibs="$deplib $deplibs"
++	  continue
++	  ;;
++	*.la) lib="$deplib" ;;
++	*.$libext)
++	  if test "$pass" = conv; then
++	    deplibs="$deplib $deplibs"
++	    continue
++	  fi
++	  case $linkmode in
++	  lib)
++	    # Linking convenience modules into shared libraries is allowed,
++	    # but linking other static libraries is non-portable.
++	    case " $dlpreconveniencelibs " in
++	    *" $lib "*) ;;
++	    *)
++	      valid_a_lib=no
++	      case $deplibs_check_method in
++		match_pattern*)
++		  set dummy $deplibs_check_method; shift
++		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
++		    | $EGREP "$match_pattern_regex" > /dev/null; then
++		    valid_a_lib=yes
++		  fi
++		;;
++		pass_all)
++		  valid_a_lib=yes
++		;;
++	      esac
++	      if test "$valid_a_lib" != yes; then
++		$ECHO
++		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
++		$ECHO "*** I have the capability to make that library automatically link in when"
++		$ECHO "*** you link to this library.  But I can only do this if you have a"
++		$ECHO "*** shared version of the library, which you do not appear to have"
++		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
++		$ECHO "*** that it is just a static archive that I should not use here."
++	      else
++		$ECHO
++		$ECHO "*** Warning: Linking the shared library $output against the"
++		$ECHO "*** static library $deplib is not portable!"
++		deplibs="$deplib $deplibs"
++	      fi
++	      ;;
++	    esac
+ 	    continue
+ 	    ;;
+-	  *-*-sco3.2v5* | *-*-sco5v6*)
+-	    # Causes problems with __ctype
+-	    test "X$arg" = "X-lc" && continue
+-	    ;;
+-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+-	    # Compiler inserts libc in the correct place for threads to work
+-	    test "X$arg" = "X-lc" && continue
++	  prog)
++	    if test "$pass" != link; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    fi
++	    continue
+ 	    ;;
+-	  esac
+-	elif test "X$arg" = "X-lc_r"; then
+-	 case $host in
+-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+-	   # Do not include libc_r directly, use -pthread flag.
+-	   continue
+-	   ;;
+-	 esac
+-	fi
+-	deplibs="$deplibs $arg"
+-	continue
+-	;;
+-
+-      -module)
+-	module=yes
+-	continue
+-	;;
+-
+-      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+-      # classes, name mangling, and exception handling.
+-      # Darwin uses the -arch flag to determine output architecture.
+-      -model|-arch|-isysroot)
+-	compiler_flags="$compiler_flags $arg"
+-	func_append compile_command " $arg"
+-	func_append finalize_command " $arg"
+-	prev=xcompiler
+-	continue
+-	;;
++	  esac # linkmode
++	  ;; # *.$libext
++	*.lo | *.$objext)
++	  if test "$pass" = conv; then
++	    deplibs="$deplib $deplibs"
++	  elif test "$linkmode" = prog; then
++	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++	      # If there is no dlopen support or we're linking statically,
++	      # we need to preload.
++	      newdlprefiles="$newdlprefiles $deplib"
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    else
++	      newdlfiles="$newdlfiles $deplib"
++	    fi
++	  fi
++	  continue
++	  ;;
++	%DEPLIBS%)
++	  alldeplibs=yes
++	  continue
++	  ;;
++	esac # case $deplib
+ 
+-      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+-	compiler_flags="$compiler_flags $arg"
+-	func_append compile_command " $arg"
+-	func_append finalize_command " $arg"
+-	case "$new_inherited_linker_flags " in
+-	    *" $arg "*) ;;
+-	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+-	esac
+-	continue
+-	;;
++	if test "$found" = yes || test -f "$lib"; then :
++	else
++	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
++	fi
+ 
+-      -multi_module)
+-	single_module="${wl}-multi_module"
+-	continue
+-	;;
++	# Check to see that this really is a libtool archive.
++	func_lalib_unsafe_p "$lib" \
++	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+ 
+-      -no-fast-install)
+-	fast_install=no
+-	continue
+-	;;
++	func_dirname "$lib" "" "."
++	ladir="$func_dirname_result"
+ 
+-      -no-install)
+-	case $host in
+-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+-	  # The PATH hackery in wrapper scripts is required on Windows
+-	  # and Darwin in order for the loader to find any dlls it needs.
+-	  func_warning "\`-no-install' is ignored for $host"
+-	  func_warning "assuming \`-no-fast-install' instead"
+-	  fast_install=no
+-	  ;;
+-	*) no_install=yes ;;
+-	esac
+-	continue
+-	;;
++	dlname=
++	dlopen=
++	dlpreopen=
++	libdir=
++	library_names=
++	old_library=
++	inherited_linker_flags=
++	# If the library was installed with an old release of libtool,
++	# it will not redefine variables installed, or shouldnotlink
++	installed=yes
++	shouldnotlink=no
++	avoidtemprpath=
+ 
+-      -no-undefined)
+-	allow_undefined=no
+-	continue
+-	;;
+ 
+-      -objectlist)
+-	prev=objectlist
+-	continue
+-	;;
++	# Read the .la file
++	func_source "$lib"
+ 
+-      -o) prev=output ;;
++	# Convert "-framework foo" to "foo.ltframework"
++	if test -n "$inherited_linker_flags"; then
++	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
++	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
++	    case " $new_inherited_linker_flags " in
++	      *" $tmp_inherited_linker_flag "*) ;;
++	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
++	    esac
++	  done
++	fi
++	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++	if test "$linkmode,$pass" = "prog,link"; then
++	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
++	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
++	else
++	  compiler_flags="$compiler_flags $inherited_linker_flags"
++	fi
++	if test "$linkmode,$pass" = "lib,link" ||
++	   test "$linkmode,$pass" = "prog,scan" ||
++	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
++	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
++	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
++	fi
+ 
+-      -precious-files-regex)
+-	prev=precious_regex
+-	continue
+-	;;
++	if test "$pass" = conv; then
++	  # Only check for convenience libraries
++	  deplibs="$lib $deplibs"
++	  if test -z "$libdir"; then
++	    if test -z "$old_library"; then
++	      func_fatal_error "cannot find name of link library for \`$lib'"
++	    fi
++	    # It is a libtool convenience library, so add in its objects.
++	    convenience="$convenience $ladir/$objdir/$old_library"
++	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
++	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
++	    func_fatal_error "\`$lib' is not a convenience library"
++	  fi
++	  tmp_libs=
++	  for deplib in $dependency_libs; do
++	    deplibs="$deplib $deplibs"
++	    if $opt_duplicate_deps ; then
++	      case "$tmp_libs " in
++	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	      esac
++	    fi
++	    tmp_libs="$tmp_libs $deplib"
++	  done
++	  continue
++	fi # $pass = conv
+ 
+-      -release)
+-	prev=release
+-	continue
+-	;;
+ 
+-      -rpath)
+-	prev=rpath
+-	continue
+-	;;
++	# Get the name of the library we link against.
++	linklib=
++	for l in $old_library $library_names; do
++	  linklib="$l"
++	done
++	if test -z "$linklib"; then
++	  func_fatal_error "cannot find name of link library for \`$lib'"
++	fi
+ 
+-      -R)
+-	prev=xrpath
+-	continue
+-	;;
++	# This library was specified with -dlopen.
++	if test "$pass" = dlopen; then
++	  if test -z "$libdir"; then
++	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
++	  fi
++	  if test -z "$dlname" ||
++	     test "$dlopen_support" != yes ||
++	     test "$build_libtool_libs" = no; then
++	    # If there is no dlname, no dlopen support or we're linking
++	    # statically, we need to preload.  We also need to preload any
++	    # dependent libraries so libltdl's deplib preloader doesn't
++	    # bomb out in the load deplibs phase.
++	    dlprefiles="$dlprefiles $lib $dependency_libs"
++	  else
++	    newdlfiles="$newdlfiles $lib"
++	  fi
++	  continue
++	fi # $pass = dlopen
+ 
+-      -R*)
+-	func_stripname '-R' '' "$arg"
+-	dir=$func_stripname_result
+ 	# We need an absolute path.
+-	case $dir in
+-	[\\/]* | [A-Za-z]:[\\/]*) ;;
++	case $ladir in
++	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ 	*)
+-	  func_fatal_error "only absolute run-paths are allowed"
++	  abs_ladir=`cd "$ladir" && pwd`
++	  if test -z "$abs_ladir"; then
++	    func_warning "cannot determine absolute directory name of \`$ladir'"
++	    func_warning "passing it literally to the linker, although it might fail"
++	    abs_ladir="$ladir"
++	  fi
+ 	  ;;
+ 	esac
+-	case "$xrpath " in
+-	*" $dir "*) ;;
+-	*) xrpath="$xrpath $dir" ;;
+-	esac
+-	continue
+-	;;
+-
+-      -shared)
+-	# The effects of -shared are defined in a previous loop.
+-	continue
+-	;;
++	func_basename "$lib"
++	laname="$func_basename_result"
+ 
+-      -shrext)
+-	prev=shrext
+-	continue
+-	;;
++	# Find the relevant object directory and library name.
++	if test "X$installed" = Xyes; then
++	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++	    func_warning "library \`$lib' was moved."
++	    dir="$ladir"
++	    absdir="$abs_ladir"
++	    libdir="$abs_ladir"
++	  else
++	    dir="$libdir"
++	    absdir="$libdir"
++	  fi
++	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
++	else
++	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++	    dir="$ladir"
++	    absdir="$abs_ladir"
++	    # Remove this search path later
++	    notinst_path="$notinst_path $abs_ladir"
++	  else
++	    dir="$ladir/$objdir"
++	    absdir="$abs_ladir/$objdir"
++	    # Remove this search path later
++	    notinst_path="$notinst_path $abs_ladir"
++	  fi
++	fi # $installed = yes
++	func_stripname 'lib' '.la' "$laname"
++	name=$func_stripname_result
+ 
+-      -static | -static-libtool-libs)
+-	# The effects of -static are defined in a previous loop.
+-	# We used to do the same as -all-static on platforms that
+-	# didn't have a PIC flag, but the assumption that the effects
+-	# would be equivalent was wrong.  It would break on at least
+-	# Digital Unix and AIX.
+-	continue
+-	;;
+-
+-      -thread-safe)
+-	thread_safe=yes
+-	continue
+-	;;
+-
+-      -version-info)
+-	prev=vinfo
+-	continue
+-	;;
+-
+-      -version-number)
+-	prev=vinfo
+-	vinfo_number=yes
+-	continue
+-	;;
+-
+-      -weak)
+-        prev=weak
+-	continue
+-	;;
+-
+-      -Wc,*)
+-	func_stripname '-Wc,' '' "$arg"
+-	args=$func_stripname_result
+-	arg=
+-	save_ifs="$IFS"; IFS=','
+-	for flag in $args; do
+-	  IFS="$save_ifs"
+-          func_quote_for_eval "$flag"
+-	  arg="$arg $wl$func_quote_for_eval_result"
+-	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
+-	done
+-	IFS="$save_ifs"
+-	func_stripname ' ' '' "$arg"
+-	arg=$func_stripname_result
+-	;;
+-
+-      -Wl,*)
+-	func_stripname '-Wl,' '' "$arg"
+-	args=$func_stripname_result
+-	arg=
+-	save_ifs="$IFS"; IFS=','
+-	for flag in $args; do
+-	  IFS="$save_ifs"
+-          func_quote_for_eval "$flag"
+-	  arg="$arg $wl$func_quote_for_eval_result"
+-	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+-	  linker_flags="$linker_flags $func_quote_for_eval_result"
+-	done
+-	IFS="$save_ifs"
+-	func_stripname ' ' '' "$arg"
+-	arg=$func_stripname_result
+-	;;
+-
+-      -Xcompiler)
+-	prev=xcompiler
+-	continue
+-	;;
+-
+-      -Xlinker)
+-	prev=xlinker
+-	continue
+-	;;
+-
+-      -XCClinker)
+-	prev=xcclinker
+-	continue
+-	;;
+-
+-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+-      # +DA*, +DD* enable 64-bit mode on the HP compiler
+-      # -q* pass through compiler args for the IBM compiler
+-      # -m*, -t[45]*, -txscale* pass through architecture-specific
+-      # compiler args for GCC
+-      # -F/path gives path to uninstalled frameworks, gcc on darwin
+-      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+-      # @file GCC response files
+-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+-        func_quote_for_eval "$arg"
+-	arg="$func_quote_for_eval_result"
+-        func_append compile_command " $arg"
+-        func_append finalize_command " $arg"
+-        compiler_flags="$compiler_flags $arg"
+-        continue
+-        ;;
+-
+-      # Some other compiler flag.
+-      -* | +*)
+-        func_quote_for_eval "$arg"
+-	arg="$func_quote_for_eval_result"
+-	;;
+-
+-      *.$objext)
+-	# A standard object.
+-	objs="$objs $arg"
+-	;;
++	# This library was specified with -dlpreopen.
++	if test "$pass" = dlpreopen; then
++	  if test -z "$libdir" && test "$linkmode" = prog; then
++	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
++	  fi
++	  # Prefer using a static library (so that no silly _DYNAMIC symbols
++	  # are required to link).
++	  if test -n "$old_library"; then
++	    newdlprefiles="$newdlprefiles $dir/$old_library"
++	    # Keep a list of preopened convenience libraries to check
++	    # that they are being used correctly in the link pass.
++	    test -z "$libdir" && \
++		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
++	  # Otherwise, use the dlname, so that lt_dlopen finds it.
++	  elif test -n "$dlname"; then
++	    newdlprefiles="$newdlprefiles $dir/$dlname"
++	  else
++	    newdlprefiles="$newdlprefiles $dir/$linklib"
++	  fi
++	fi # $pass = dlpreopen
+ 
+-      *.lo)
+-	# A libtool-controlled object.
++	if test -z "$libdir"; then
++	  # Link the convenience library
++	  if test "$linkmode" = lib; then
++	    deplibs="$dir/$old_library $deplibs"
++	  elif test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$dir/$old_library $compile_deplibs"
++	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
++	  else
++	    deplibs="$lib $deplibs" # used for prog,scan pass
++	  fi
++	  continue
++	fi
+ 
+-	# Check to see that this really is a libtool object.
+-	if func_lalib_unsafe_p "$arg"; then
+-	  pic_object=
+-	  non_pic_object=
+ 
+-	  # Read the .lo file
+-	  func_source "$arg"
++	if test "$linkmode" = prog && test "$pass" != link; then
++	  newlib_search_path="$newlib_search_path $ladir"
++	  deplibs="$lib $deplibs"
+ 
+-	  if test -z "$pic_object" ||
+-	     test -z "$non_pic_object" ||
+-	     test "$pic_object" = none &&
+-	     test "$non_pic_object" = none; then
+-	    func_fatal_error "cannot find name of object for \`$arg'"
++	  linkalldeplibs=no
++	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
++	     test "$build_libtool_libs" = no; then
++	    linkalldeplibs=yes
+ 	  fi
+ 
+-	  # Extract subdirectory from the argument.
+-	  func_dirname "$arg" "/" ""
+-	  xdir="$func_dirname_result"
+-
+-	  if test "$pic_object" != none; then
+-	    # Prepend the subdirectory the object is found in.
+-	    pic_object="$xdir$pic_object"
+-
+-	    if test "$prev" = dlfiles; then
+-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+-		dlfiles="$dlfiles $pic_object"
+-		prev=
+-		continue
+-	      else
+-		# If libtool objects are unsupported, then we need to preload.
+-		prev=dlprefiles
+-	      fi
++	  tmp_libs=
++	  for deplib in $dependency_libs; do
++	    case $deplib in
++	    -L*) func_stripname '-L' '' "$deplib"
++	         newlib_search_path="$newlib_search_path $func_stripname_result"
++		 ;;
++	    esac
++	    # Need to link against all dependency_libs?
++	    if test "$linkalldeplibs" = yes; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      # Need to hardcode shared library paths
++	      # or/and link against static libraries
++	      newdependency_libs="$deplib $newdependency_libs"
+ 	    fi
+-
+-	    # CHECK ME:  I think I busted this.  -Ossama
+-	    if test "$prev" = dlprefiles; then
+-	      # Preload the old-style object.
+-	      dlprefiles="$dlprefiles $pic_object"
+-	      prev=
++	    if $opt_duplicate_deps ; then
++	      case "$tmp_libs " in
++	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	      esac
+ 	    fi
++	    tmp_libs="$tmp_libs $deplib"
++	  done # for deplib
++	  continue
++	fi # $linkmode = prog...
+ 
+-	    # A PIC object.
+-	    func_append libobjs " $pic_object"
+-	    arg="$pic_object"
+-	  fi
++	if test "$linkmode,$pass" = "prog,link"; then
++	  if test -n "$library_names" &&
++	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
++	    # We need to hardcode the library path
++	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
++	      # Make sure the rpath contains only unique directories.
++	      case "$temp_rpath " in
++	      *"$absdir:"*) ;;
++	      *) temp_rpath="$temp_rpath:$absdir" ;;
++	      esac
++	    fi
+ 
+-	  # Non-PIC object.
+-	  if test "$non_pic_object" != none; then
+-	    # Prepend the subdirectory the object is found in.
+-	    non_pic_object="$xdir$non_pic_object"
++	    # Hardcode the library path.
++	    # Skip directories that are in the system default run-time
++	    # search path.
++	    case " $sys_lib_dlsearch_path " in
++	    *" $absdir "*) ;;
++	    *)
++	      case "$compile_rpath " in
++	      *" $absdir "*) ;;
++	      *) compile_rpath="$compile_rpath $absdir"
++	      esac
++	      ;;
++	    esac
++	    case " $sys_lib_dlsearch_path " in
++	    *" $libdir "*) ;;
++	    *)
++	      case "$finalize_rpath " in
++	      *" $libdir "*) ;;
++	      *) finalize_rpath="$finalize_rpath $libdir"
++	      esac
++	      ;;
++	    esac
++	  fi # $linkmode,$pass = prog,link...
+ 
+-	    # A standard non-PIC object
+-	    func_append non_pic_objects " $non_pic_object"
+-	    if test -z "$pic_object" || test "$pic_object" = none ; then
+-	      arg="$non_pic_object"
+-	    fi
+-	  else
+-	    # If the PIC object exists, use it instead.
+-	    # $xdir was prepended to $pic_object above.
+-	    non_pic_object="$pic_object"
+-	    func_append non_pic_objects " $non_pic_object"
++	  if test "$alldeplibs" = yes &&
++	     { test "$deplibs_check_method" = pass_all ||
++	       { test "$build_libtool_libs" = yes &&
++		 test -n "$library_names"; }; }; then
++	    # We only need to search for static libraries
++	    continue
+ 	  fi
+-	else
+-	  # Only an error if not doing a dry-run.
+-	  if $opt_dry_run; then
+-	    # Extract subdirectory from the argument.
+-	    func_dirname "$arg" "/" ""
+-	    xdir="$func_dirname_result"
++	fi
+ 
+-	    func_lo2o "$arg"
+-	    pic_object=$xdir$objdir/$func_lo2o_result
+-	    non_pic_object=$xdir$func_lo2o_result
+-	    func_append libobjs " $pic_object"
+-	    func_append non_pic_objects " $non_pic_object"
+-	  else
+-	    func_fatal_error "\`$arg' is not a valid libtool object"
+-	  fi
++	link_static=no # Whether the deplib will be linked statically
++	use_static_libs=$prefer_static_libs
++	if test "$use_static_libs" = built && test "$installed" = yes; then
++	  use_static_libs=no
+ 	fi
+-	;;
+-
+-      *.$libext)
+-	# An archive.
+-	deplibs="$deplibs $arg"
+-	old_deplibs="$old_deplibs $arg"
+-	continue
+-	;;
++	if test -n "$library_names" &&
++	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
++	  case $host in
++	  *cygwin* | *mingw*)
++	      # No point in relinking DLLs because paths are not encoded
++	      notinst_deplibs="$notinst_deplibs $lib"
++	      need_relink=no
++	    ;;
++	  *)
++	    if test "$installed" = no; then
++	      notinst_deplibs="$notinst_deplibs $lib"
++	      need_relink=yes
++	    fi
++	    ;;
++	  esac
++	  # This is a shared library
+ 
+-      *.la)
+-	# A libtool-controlled library.
++	  # Warn about portability, can't link against -module's on some
++	  # systems (darwin).  Don't bleat about dlopened modules though!
++	  dlopenmodule=""
++	  for dlpremoduletest in $dlprefiles; do
++	    if test "X$dlpremoduletest" = "X$lib"; then
++	      dlopenmodule="$dlpremoduletest"
++	      break
++	    fi
++	  done
++	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
++	    $ECHO
++	    if test "$linkmode" = prog; then
++	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
++	    else
++	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
++	    fi
++	    $ECHO "*** $linklib is not portable!"
++	  fi
++	  if test "$linkmode" = lib &&
++	     test "$hardcode_into_libs" = yes; then
++	    # Hardcode the library path.
++	    # Skip directories that are in the system default run-time
++	    # search path.
++	    case " $sys_lib_dlsearch_path " in
++	    *" $absdir "*) ;;
++	    *)
++	      case "$compile_rpath " in
++	      *" $absdir "*) ;;
++	      *) compile_rpath="$compile_rpath $absdir"
++	      esac
++	      ;;
++	    esac
++	    case " $sys_lib_dlsearch_path " in
++	    *" $libdir "*) ;;
++	    *)
++	      case "$finalize_rpath " in
++	      *" $libdir "*) ;;
++	      *) finalize_rpath="$finalize_rpath $libdir"
++	      esac
++	      ;;
++	    esac
++	  fi
+ 
+-	if test "$prev" = dlfiles; then
+-	  # This library was specified with -dlopen.
+-	  dlfiles="$dlfiles $arg"
+-	  prev=
+-	elif test "$prev" = dlprefiles; then
+-	  # The library was specified with -dlpreopen.
+-	  dlprefiles="$dlprefiles $arg"
+-	  prev=
+-	else
+-	  deplibs="$deplibs $arg"
+-	fi
+-	continue
+-	;;
++	  if test -n "$old_archive_from_expsyms_cmds"; then
++	    # figure out the soname
++	    set dummy $library_names
++	    shift
++	    realname="$1"
++	    shift
++	    libname=`eval "\\$ECHO \"$libname_spec\""`
++	    # use dlname if we got it. it's perfectly good, no?
++	    if test -n "$dlname"; then
++	      soname="$dlname"
++	    elif test -n "$soname_spec"; then
++	      # bleh windows
++	      case $host in
++	      *cygwin* | mingw*)
++		major=`expr $current - $age`
++		versuffix="-$major"
++		;;
++	      esac
++	      eval soname=\"$soname_spec\"
++	    else
++	      soname="$realname"
++	    fi
+ 
+-      # Some other compiler argument.
+-      *)
+-	# Unknown arguments in both finalize_command and compile_command need
+-	# to be aesthetically quoted because they are evaled later.
+-	func_quote_for_eval "$arg"
+-	arg="$func_quote_for_eval_result"
+-	;;
+-      esac # arg
++	    # Make a new name for the extract_expsyms_cmds to use
++	    soroot="$soname"
++	    func_basename "$soroot"
++	    soname="$func_basename_result"
++	    func_stripname 'lib' '.dll' "$soname"
++	    newlib=libimp-$func_stripname_result.a
+ 
+-      # Now actually substitute the argument into the commands.
+-      if test -n "$arg"; then
+-	func_append compile_command " $arg"
+-	func_append finalize_command " $arg"
+-      fi
+-    done # argument parsing loop
++	    # If the library has no export list, then create one now
++	    if test -f "$output_objdir/$soname-def"; then :
++	    else
++	      func_echo "extracting exported symbol list from \`$soname'"
++	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
++	    fi
+ 
+-    test -n "$prev" && \
+-      func_fatal_help "the \`$prevarg' option requires an argument"
++	    # Create $newlib
++	    if test -f "$output_objdir/$newlib"; then :; else
++	      func_echo "generating import library for \`$soname'"
++	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
++	    fi
++	    # make sure the library variables are pointing to the new library
++	    dir=$output_objdir
++	    linklib=$newlib
++	  fi # test -n "$old_archive_from_expsyms_cmds"
+ 
+-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+-      eval arg=\"$export_dynamic_flag_spec\"
+-      func_append compile_command " $arg"
+-      func_append finalize_command " $arg"
+-    fi
++	  if test "$linkmode" = prog || test "$mode" != relink; then
++	    add_shlibpath=
++	    add_dir=
++	    add=
++	    lib_linked=yes
++	    case $hardcode_action in
++	    immediate | unsupported)
++	      if test "$hardcode_direct" = no; then
++		add="$dir/$linklib"
++		case $host in
++		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
++		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
++		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
++		    *-*-unixware7*) add_dir="-L$dir" ;;
++		  *-*-darwin* )
++		    # if the lib is a (non-dlopened) module then we can not
++		    # link against it, someone is ignoring the earlier warnings
++		    if /usr/bin/file -L $add 2> /dev/null |
++			 $GREP ": [^:]* bundle" >/dev/null ; then
++		      if test "X$dlopenmodule" != "X$lib"; then
++			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
++			if test -z "$old_library" ; then
++			  $ECHO
++			  $ECHO "*** And there doesn't seem to be a static archive available"
++			  $ECHO "*** The link will probably fail, sorry"
++			else
++			  add="$dir/$old_library"
++			fi
++		      elif test -n "$old_library"; then
++			add="$dir/$old_library"
++		      fi
++		    fi
++		esac
++	      elif test "$hardcode_minus_L" = no; then
++		case $host in
++		*-*-sunos*) add_shlibpath="$dir" ;;
++		esac
++		add_dir="-L$dir"
++		add="-l$name"
++	      elif test "$hardcode_shlibpath_var" = no; then
++		add_shlibpath="$dir"
++		add="-l$name"
++	      else
++		lib_linked=no
++	      fi
++	      ;;
++	    relink)
++	      if test "$hardcode_direct" = yes; then
++		add="$dir/$linklib"
++	      elif test "$hardcode_minus_L" = yes; then
++		add_dir="-L$dir"
++		# Try looking first in the location we're being installed to.
++		if test -n "$inst_prefix_dir"; then
++		  case $libdir in
++		    [\\/]*)
++		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
++		      ;;
++		  esac
++		fi
++		add="-l$name"
++	      elif test "$hardcode_shlibpath_var" = yes; then
++		add_shlibpath="$dir"
++		add="-l$name"
++	      else
++		lib_linked=no
++	      fi
++	      ;;
++	    *) lib_linked=no ;;
++	    esac
+ 
+-    oldlibs=
+-    # calculate the name of the file, without its directory
+-    func_basename "$output"
+-    outputname="$func_basename_result"
+-    libobjs_save="$libobjs"
++	    if test "$lib_linked" != yes; then
++	      func_fatal_configuration "unsupported hardcode properties"
++	    fi
+ 
+-    if test -n "$shlibpath_var"; then
+-      # get the directories listed in $shlibpath_var
+-      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+-    else
+-      shlib_search_path=
+-    fi
+-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
++	    if test -n "$add_shlibpath"; then
++	      case :$compile_shlibpath: in
++	      *":$add_shlibpath:"*) ;;
++	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
++	      esac
++	    fi
++	    if test "$linkmode" = prog; then
++	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
++	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
++	    else
++	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
++	      test -n "$add" && deplibs="$add $deplibs"
++	      if test "$hardcode_direct" != yes &&
++		 test "$hardcode_minus_L" != yes &&
++		 test "$hardcode_shlibpath_var" = yes; then
++		case :$finalize_shlibpath: in
++		*":$libdir:"*) ;;
++		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++		esac
++	      fi
++	    fi
++	  fi
+ 
+-    func_dirname "$output" "/" ""
+-    output_objdir="$func_dirname_result$objdir"
+-    # Create the object directory.
+-    func_mkdir_p "$output_objdir"
++	  if test "$linkmode" = prog || test "$mode" = relink; then
++	    add_shlibpath=
++	    add_dir=
++	    add=
++	    # Finalize command for both is simple: just hardcode it.
++	    if test "$hardcode_direct" = yes; then
++	      add="$libdir/$linklib"
++	    elif test "$hardcode_minus_L" = yes; then
++	      add_dir="-L$libdir"
++	      add="-l$name"
++	    elif test "$hardcode_shlibpath_var" = yes; then
++	      case :$finalize_shlibpath: in
++	      *":$libdir:"*) ;;
++	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++	      esac
++	      add="-l$name"
++	    elif test "$hardcode_automatic" = yes; then
++	      if test -n "$inst_prefix_dir" &&
++		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
++		add="$inst_prefix_dir$libdir/$linklib"
++	      else
++		add="$libdir/$linklib"
++	      fi
++	    else
++	      # We cannot seem to hardcode it, guess we'll fake it.
++	      add_dir="-L$libdir"
++	      # Try looking first in the location we're being installed to.
++	      if test -n "$inst_prefix_dir"; then
++		case $libdir in
++		  [\\/]*)
++		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
++		    ;;
++		esac
++	      fi
++	      add="-l$name"
++	    fi
+ 
+-    # Determine the type of output
+-    case $output in
+-    "")
+-      func_fatal_help "you must specify an output file"
+-      ;;
+-    *.$libext) linkmode=oldlib ;;
+-    *.lo | *.$objext) linkmode=obj ;;
+-    *.la) linkmode=lib ;;
+-    *) linkmode=prog ;; # Anything else should be a program.
+-    esac
++	    if test "$linkmode" = prog; then
++	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
++	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
++	    else
++	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
++	      test -n "$add" && deplibs="$add $deplibs"
++	    fi
++	  fi
++	elif test "$linkmode" = prog; then
++	  # Here we assume that one of hardcode_direct or hardcode_minus_L
++	  # is not unsupported.  This is valid on all known static and
++	  # shared platforms.
++	  if test "$hardcode_direct" != unsupported; then
++	    test -n "$old_library" && linklib="$old_library"
++	    compile_deplibs="$dir/$linklib $compile_deplibs"
++	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
++	  else
++	    compile_deplibs="-l$name -L$dir $compile_deplibs"
++	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
++	  fi
++	elif test "$build_libtool_libs" = yes; then
++	  # Not a shared library
++	  if test "$deplibs_check_method" != pass_all; then
++	    # We're trying link a shared library against a static one
++	    # but the system doesn't support it.
+ 
+-    specialdeplibs=
++	    # Just print a warning and add the library to dependency_libs so
++	    # that the program can be linked against the static library.
++	    $ECHO
++	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
++	    $ECHO "*** I have the capability to make that library automatically link in when"
++	    $ECHO "*** you link to this library.  But I can only do this if you have a"
++	    $ECHO "*** shared version of the library, which you do not appear to have."
++	    if test "$module" = yes; then
++	      $ECHO "*** But as you try to build a module library, libtool will still create "
++	      $ECHO "*** a static module, that should work as long as the dlopening application"
++	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
++	      if test -z "$global_symbol_pipe"; then
++		$ECHO
++		$ECHO "*** However, this would only work if libtool was able to extract symbol"
++		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
++		$ECHO "*** not find such a program.  So, this module is probably useless."
++		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
++	      fi
++	      if test "$build_old_libs" = no; then
++		build_libtool_libs=module
++		build_old_libs=yes
++	      else
++		build_libtool_libs=no
++	      fi
++	    fi
++	  else
++	    deplibs="$dir/$old_library $deplibs"
++	    link_static=yes
++	  fi
++	fi # link shared/static library?
+ 
+-    libs=
+-    # Find all interdependent deplibs by searching for libraries
+-    # that are linked more than once (e.g. -la -lb -la)
+-    for deplib in $deplibs; do
+-      if $opt_duplicate_deps ; then
+-	case "$libs " in
+-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	esac
+-      fi
+-      libs="$libs $deplib"
+-    done
++	if test "$linkmode" = lib; then
++	  if test -n "$dependency_libs" &&
++	     { test "$hardcode_into_libs" != yes ||
++	       test "$build_old_libs" = yes ||
++	       test "$link_static" = yes; }; then
++	    # Extract -R from dependency_libs
++	    temp_deplibs=
++	    for libdir in $dependency_libs; do
++	      case $libdir in
++	      -R*) func_stripname '-R' '' "$libdir"
++	           temp_xrpath=$func_stripname_result
++		   case " $xrpath " in
++		   *" $temp_xrpath "*) ;;
++		   *) xrpath="$xrpath $temp_xrpath";;
++		   esac;;
++	      *) temp_deplibs="$temp_deplibs $libdir";;
++	      esac
++	    done
++	    dependency_libs="$temp_deplibs"
++	  fi
+ 
+-    if test "$linkmode" = lib; then
+-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
++	  newlib_search_path="$newlib_search_path $absdir"
++	  # Link against this library
++	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
++	  # ... and its dependency_libs
++	  tmp_libs=
++	  for deplib in $dependency_libs; do
++	    newdependency_libs="$deplib $newdependency_libs"
++	    if $opt_duplicate_deps ; then
++	      case "$tmp_libs " in
++	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	      esac
++	    fi
++	    tmp_libs="$tmp_libs $deplib"
++	  done
+ 
+-      # Compute libraries that are listed more than once in $predeps
+-      # $postdeps and mark them as special (i.e., whose duplicates are
+-      # not to be eliminated).
+-      pre_post_deps=
+-      if $opt_duplicate_compiler_generated_deps; then
+-	for pre_post_dep in $predeps $postdeps; do
+-	  case "$pre_post_deps " in
+-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+-	  esac
+-	  pre_post_deps="$pre_post_deps $pre_post_dep"
++	  if test "$link_all_deplibs" != no; then
++	    # Add the search paths of all dependency libraries
++	    for deplib in $dependency_libs; do
++	      case $deplib in
++	      -L*) path="$deplib" ;;
++	      *.la)
++	        func_dirname "$deplib" "" "."
++		dir="$func_dirname_result"
++		# We need an absolute path.
++		case $dir in
++		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
++		*)
++		  absdir=`cd "$dir" && pwd`
++		  if test -z "$absdir"; then
++		    func_warning "cannot determine absolute directory name of \`$dir'"
++		    absdir="$dir"
++		  fi
++		  ;;
++		esac
++		if $GREP "^installed=no" $deplib > /dev/null; then
++		case $host in
++		*-*-darwin*)
++		  depdepl=
++		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
++		  if test -n "$deplibrary_names" ; then
++		    for tmp in $deplibrary_names ; do
++		      depdepl=$tmp
++		    done
++		    if test -f "$absdir/$objdir/$depdepl" ; then
++		      depdepl="$absdir/$objdir/$depdepl"
++		      darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
++		      darwin_install_name=`$ECHO $darwin_install_name`
++		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
++		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
++		      path=
++		    fi
++		  fi
++		  ;;
++		*)
++		  path="-L$absdir/$objdir"
++		  ;;
++		esac
++		else
++		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++		  test -z "$libdir" && \
++		    func_fatal_error "\`$deplib' is not a valid libtool archive"
++		  test "$absdir" != "$libdir" && \
++		    func_warning "\`$deplib' seems to be moved"
++
++		  path="-L$absdir"
++		fi
++		;;
++	      esac
++	      case " $deplibs " in
++	      *" $path "*) ;;
++	      *) deplibs="$path $deplibs" ;;
++	      esac
++	    done
++	  fi # link_all_deplibs != no
++	fi # linkmode = lib
++      done # for deplib in $libs
++      dependency_libs="$newdependency_libs"
++      if test "$pass" = dlpreopen; then
++	# Link the dlpreopened libraries before other libraries
++	for deplib in $save_deplibs; do
++	  deplibs="$deplib $deplibs"
+ 	done
+       fi
+-      pre_post_deps=
+-    fi
+-
+-    deplibs=
+-    newdependency_libs=
+-    newlib_search_path=
+-    need_relink=no # whether we're linking any uninstalled libtool libraries
+-    notinst_deplibs= # not-installed libtool libraries
+-    notinst_path= # paths that contain not-installed libtool libraries
++      if test "$pass" != dlopen; then
++	if test "$pass" != conv; then
++	  # Make sure lib_search_path contains only unique directories.
++	  lib_search_path=
++	  for dir in $newlib_search_path; do
++	    case "$lib_search_path " in
++	    *" $dir "*) ;;
++	    *) lib_search_path="$lib_search_path $dir" ;;
++	    esac
++	  done
++	  newlib_search_path=
++	fi
+ 
+-    case $linkmode in
+-    lib)
+-	passes="conv dlpreopen link"
+-	for file in $dlfiles $dlprefiles; do
+-	  case $file in
+-	  *.la) ;;
+-	  *)
+-	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+-	    ;;
+-	  esac
+-	done
+-	;;
+-    prog)
+-	compile_deplibs=
+-	finalize_deplibs=
+-	alldeplibs=no
+-	newdlfiles=
+-	newdlprefiles=
+-	passes="conv scan dlopen dlpreopen link"
+-	;;
+-    *)  passes="conv"
+-	;;
+-    esac
+-
+-    for pass in $passes; do
+-      # The preopen pass in lib mode reverses $deplibs; put it back here
+-      # so that -L comes before libs that need it for instance...
+-      if test "$linkmode,$pass" = "lib,link"; then
+-	## FIXME: Find the place where the list is rebuilt in the wrong
+-	##        order, and fix it there properly
+-        tmp_deplibs=
+-	for deplib in $deplibs; do
+-	  tmp_deplibs="$deplib $tmp_deplibs"
+-	done
+-	deplibs="$tmp_deplibs"
+-      fi
+-
+-      if test "$linkmode,$pass" = "lib,link" ||
+-	 test "$linkmode,$pass" = "prog,scan"; then
+-	libs="$deplibs"
+-	deplibs=
++	if test "$linkmode,$pass" != "prog,link"; then
++	  vars="deplibs"
++	else
++	  vars="compile_deplibs finalize_deplibs"
++	fi
++	for var in $vars dependency_libs; do
++	  # Add libraries to $var in reverse order
++	  eval tmp_libs=\"\$$var\"
++	  new_libs=
++	  for deplib in $tmp_libs; do
++	    # FIXME: Pedantically, this is the right thing to do, so
++	    #        that some nasty dependency loop isn't accidentally
++	    #        broken:
++	    #new_libs="$deplib $new_libs"
++	    # Pragmatically, this seems to cause very few problems in
++	    # practice:
++	    case $deplib in
++	    -L*) new_libs="$deplib $new_libs" ;;
++	    -R*) ;;
++	    *)
++	      # And here is the reason: when a library appears more
++	      # than once as an explicit dependence of a library, or
++	      # is implicitly linked in more than once by the
++	      # compiler, it is considered special, and multiple
++	      # occurrences thereof are not removed.  Compare this
++	      # with having the same library being listed as a
++	      # dependency of multiple other libraries: in this case,
++	      # we know (pedantically, we assume) the library does not
++	      # need to be listed more than once, so we keep only the
++	      # last copy.  This is not always right, but it is rare
++	      # enough that we require users that really mean to play
++	      # such unportable linking tricks to link the library
++	      # using -Wl,-lname, so that libtool does not consider it
++	      # for duplicate removal.
++	      case " $specialdeplibs " in
++	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
++	      *)
++		case " $new_libs " in
++		*" $deplib "*) ;;
++		*) new_libs="$deplib $new_libs" ;;
++		esac
++		;;
++	      esac
++	      ;;
++	    esac
++	  done
++	  tmp_libs=
++	  for deplib in $new_libs; do
++	    case $deplib in
++	    -L*)
++	      case " $tmp_libs " in
++	      *" $deplib "*) ;;
++	      *) tmp_libs="$tmp_libs $deplib" ;;
++	      esac
++	      ;;
++	    *) tmp_libs="$tmp_libs $deplib" ;;
++	    esac
++	  done
++	  eval $var=\"$tmp_libs\"
++	done # for var
+       fi
+-      if test "$linkmode" = prog; then
+-	case $pass in
+-	dlopen) libs="$dlfiles" ;;
+-	dlpreopen) libs="$dlprefiles" ;;
+-	link)
+-	  libs="$deplibs %DEPLIBS%"
+-	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
++      # Last step: remove runtime libs from dependency_libs
++      # (they stay in deplibs)
++      tmp_libs=
++      for i in $dependency_libs ; do
++	case " $predeps $postdeps $compiler_lib_search_path " in
++	*" $i "*)
++	  i=""
+ 	  ;;
+ 	esac
+-      fi
+-      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+-	# Collect and forward deplibs of preopened libtool libs
+-	for lib in $dlprefiles; do
+-	  # Ignore non-libtool-libs
+-	  dependency_libs=
+-	  case $lib in
+-	  *.la)	func_source "$lib" ;;
+-	  esac
++	if test -n "$i" ; then
++	  tmp_libs="$tmp_libs $i"
++	fi
++      done
++      dependency_libs=$tmp_libs
++    done # for pass
++    if test "$linkmode" = prog; then
++      dlfiles="$newdlfiles"
++    fi
++    if test "$linkmode" = prog || test "$linkmode" = lib; then
++      dlprefiles="$newdlprefiles"
++    fi
+ 
+-	  # Collect preopened libtool deplibs, except any this library
+-	  # has declared as weak libs
+-	  for deplib in $dependency_libs; do
+-            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+-	    case " $weak_libs " in
+-	    *" $deplib_base "*) ;;
+-	    *) deplibs="$deplibs $deplib" ;;
+-	    esac
+-	  done
+-	done
+-	libs="$dlprefiles"
+-      fi
+-      if test "$pass" = dlopen; then
+-	# Collect dlpreopened libraries
+-	save_deplibs="$deplibs"
+-	deplibs=
++    case $linkmode in
++    oldlib)
++      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++	func_warning "\`-dlopen' is ignored for archives"
+       fi
+ 
+-      for deplib in $libs; do
+-	lib=
+-	found=no
+-	case $deplib in
+-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+-	  if test "$linkmode,$pass" = "prog,link"; then
+-	    compile_deplibs="$deplib $compile_deplibs"
+-	    finalize_deplibs="$deplib $finalize_deplibs"
+-	  else
+-	    compiler_flags="$compiler_flags $deplib"
+-	    if test "$linkmode" = lib ; then
+-		case "$new_inherited_linker_flags " in
+-		    *" $deplib "*) ;;
+-		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+-		esac
+-	    fi
+-	  fi
+-	  continue
+-	  ;;
+-	-l*)
+-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+-	    func_warning "\`-l' is ignored for archives/objects"
+-	    continue
+-	  fi
+-	  func_stripname '-l' '' "$deplib"
++      test -n "$deplibs" && \
++	func_warning "\`-l' and \`-L' are ignored for archives"
++
++
++      test -n "$rpath" && \
++	func_warning "\`-rpath' is ignored for archives"
++
++      test -n "$xrpath" && \
++	func_warning "\`-R' is ignored for archives"
++
++      test -n "$vinfo" && \
++	func_warning "\`-version-info/-version-number' is ignored for archives"
++
++      test -n "$release" && \
++	func_warning "\`-release' is ignored for archives"
++
++      test -n "$export_symbols$export_symbols_regex" && \
++	func_warning "\`-export-symbols' is ignored for archives"
++
++      # Now set the variables for building old libraries.
++      build_libtool_libs=no
++      oldlibs="$output"
++      objs="$objs$old_deplibs"
++      ;;
++
++    lib)
++      # Make sure we only generate libraries of the form `libNAME.la'.
++      case $outputname in
++      lib*)
++	func_stripname 'lib' '.la' "$outputname"
++	name=$func_stripname_result
++	eval shared_ext=\"$shrext_cmds\"
++	eval libname=\"$libname_spec\"
++	;;
++      *)
++	test "$module" = no && \
++	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
++
++	if test "$need_lib_prefix" != no; then
++	  # Add the "lib" prefix for modules if required
++	  func_stripname '' '.la' "$outputname"
+ 	  name=$func_stripname_result
+-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+-	    for search_ext in .la $std_shrext .so .a; do
+-	      # Search the libtool library
+-	      lib="$searchdir/lib${name}${search_ext}"
+-	      if test -f "$lib"; then
+-		if test "$search_ext" = ".la"; then
+-		  found=yes
+-		else
+-		  found=no
+-		fi
+-		break 2
+-	      fi
+-	    done
+-	  done
+-	  if test "$found" != yes; then
+-	    # deplib doesn't seem to be a libtool library
+-	    if test "$linkmode,$pass" = "prog,link"; then
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    else
+-	      deplibs="$deplib $deplibs"
+-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+-	    fi
+-	    continue
+-	  else # deplib is a libtool library
+-	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+-	    # We need to do some special things here, and not later.
+-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-	      case " $predeps $postdeps " in
+-	      *" $deplib "*)
+-		if func_lalib_p "$lib"; then
+-		  library_names=
+-		  old_library=
+-		  func_source "$lib"
+-		  for l in $old_library $library_names; do
+-		    ll="$l"
+-		  done
+-		  if test "X$ll" = "X$old_library" ; then # only static version available
+-		    found=no
+-		    func_dirname "$lib" "" "."
+-		    ladir="$func_dirname_result"
+-		    lib=$ladir/$old_library
+-		    if test "$linkmode,$pass" = "prog,link"; then
+-		      compile_deplibs="$deplib $compile_deplibs"
+-		      finalize_deplibs="$deplib $finalize_deplibs"
+-		    else
+-		      deplibs="$deplib $deplibs"
+-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+-		    fi
+-		    continue
+-		  fi
+-		fi
+-		;;
+-	      *) ;;
+-	      esac
+-	    fi
+-	  fi
+-	  ;; # -l
+-	*.ltframework)
+-	  if test "$linkmode,$pass" = "prog,link"; then
+-	    compile_deplibs="$deplib $compile_deplibs"
+-	    finalize_deplibs="$deplib $finalize_deplibs"
+-	  else
+-	    deplibs="$deplib $deplibs"
+-	    if test "$linkmode" = lib ; then
+-		case "$new_inherited_linker_flags " in
+-		    *" $deplib "*) ;;
+-		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+-		esac
+-	    fi
+-	  fi
+-	  continue
+-	  ;;
+-	-L*)
+-	  case $linkmode in
+-	  lib)
+-	    deplibs="$deplib $deplibs"
+-	    test "$pass" = conv && continue
+-	    newdependency_libs="$deplib $newdependency_libs"
+-	    func_stripname '-L' '' "$deplib"
+-	    newlib_search_path="$newlib_search_path $func_stripname_result"
+-	    ;;
+-	  prog)
+-	    if test "$pass" = conv; then
+-	      deplibs="$deplib $deplibs"
+-	      continue
+-	    fi
+-	    if test "$pass" = scan; then
+-	      deplibs="$deplib $deplibs"
+-	    else
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    fi
+-	    func_stripname '-L' '' "$deplib"
+-	    newlib_search_path="$newlib_search_path $func_stripname_result"
+-	    ;;
+-	  *)
+-	    func_warning "\`-L' is ignored for archives/objects"
+-	    ;;
+-	  esac # linkmode
+-	  continue
+-	  ;; # -L
+-	-R*)
+-	  if test "$pass" = link; then
+-	    func_stripname '-R' '' "$deplib"
+-	    dir=$func_stripname_result
+-	    # Make sure the xrpath contains only unique directories.
+-	    case "$xrpath " in
+-	    *" $dir "*) ;;
+-	    *) xrpath="$xrpath $dir" ;;
+-	    esac
+-	  fi
+-	  deplibs="$deplib $deplibs"
+-	  continue
+-	  ;;
+-	*.la) lib="$deplib" ;;
+-	*.$libext)
+-	  if test "$pass" = conv; then
+-	    deplibs="$deplib $deplibs"
+-	    continue
+-	  fi
+-	  case $linkmode in
+-	  lib)
+-	    # Linking convenience modules into shared libraries is allowed,
+-	    # but linking other static libraries is non-portable.
+-	    case " $dlpreconveniencelibs " in
+-	    *" $deplib "*) ;;
+-	    *)
+-	      valid_a_lib=no
+-	      case $deplibs_check_method in
+-		match_pattern*)
+-		  set dummy $deplibs_check_method; shift
+-		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+-		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
+-		    | $EGREP "$match_pattern_regex" > /dev/null; then
+-		    valid_a_lib=yes
+-		  fi
+-		;;
+-		pass_all)
+-		  valid_a_lib=yes
+-		;;
+-	      esac
+-	      if test "$valid_a_lib" != yes; then
+-		$ECHO
+-		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+-		$ECHO "*** I have the capability to make that library automatically link in when"
+-		$ECHO "*** you link to this library.  But I can only do this if you have a"
+-		$ECHO "*** shared version of the library, which you do not appear to have"
+-		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
+-		$ECHO "*** that it is just a static archive that I should not use here."
+-	      else
+-		$ECHO
+-		$ECHO "*** Warning: Linking the shared library $output against the"
+-		$ECHO "*** static library $deplib is not portable!"
+-		deplibs="$deplib $deplibs"
+-	      fi
+-	      ;;
+-	    esac
+-	    continue
+-	    ;;
+-	  prog)
+-	    if test "$pass" != link; then
+-	      deplibs="$deplib $deplibs"
+-	    else
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    fi
+-	    continue
+-	    ;;
+-	  esac # linkmode
+-	  ;; # *.$libext
+-	*.lo | *.$objext)
+-	  if test "$pass" = conv; then
+-	    deplibs="$deplib $deplibs"
+-	  elif test "$linkmode" = prog; then
+-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+-	      # If there is no dlopen support or we're linking statically,
+-	      # we need to preload.
+-	      newdlprefiles="$newdlprefiles $deplib"
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    else
+-	      newdlfiles="$newdlfiles $deplib"
+-	    fi
+-	  fi
+-	  continue
+-	  ;;
+-	%DEPLIBS%)
+-	  alldeplibs=yes
+-	  continue
+-	  ;;
+-	esac # case $deplib
++	  eval shared_ext=\"$shrext_cmds\"
++	  eval libname=\"$libname_spec\"
++	else
++	  func_stripname '' '.la' "$outputname"
++	  libname=$func_stripname_result
++	fi
++	;;
++      esac
+ 
+-	if test "$found" = yes || test -f "$lib"; then :
++      if test -n "$objs"; then
++	if test "$deplibs_check_method" != pass_all; then
++	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ 	else
+-	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
++	  $ECHO
++	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
++	  $ECHO "*** objects $objs is not portable!"
++	  libobjs="$libobjs $objs"
+ 	fi
++      fi
+ 
+-	# Check to see that this really is a libtool archive.
+-	func_lalib_unsafe_p "$lib" \
+-	  || func_fatal_error "\`$lib' is not a valid libtool archive"
++      test "$dlself" != no && \
++	func_warning "\`-dlopen self' is ignored for libtool libraries"
+ 
+-	func_dirname "$lib" "" "."
+-	ladir="$func_dirname_result"
++      set dummy $rpath
++      shift
++      test "$#" -gt 1 && \
++	func_warning "ignoring multiple \`-rpath's for a libtool library"
+ 
+-	dlname=
+-	dlopen=
+-	dlpreopen=
+-	libdir=
+-	library_names=
+-	old_library=
+-	inherited_linker_flags=
+-	# If the library was installed with an old release of libtool,
+-	# it will not redefine variables installed, or shouldnotlink
+-	installed=yes
+-	shouldnotlink=no
+-	avoidtemprpath=
++      install_libdir="$1"
+ 
++      oldlibs=
++      if test -z "$rpath"; then
++	if test "$build_libtool_libs" = yes; then
++	  # Building a libtool convenience library.
++	  # Some compilers have problems with a `.al' extension so
++	  # convenience libraries should have the same extension an
++	  # archive normally would.
++	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
++	  build_libtool_libs=convenience
++	  build_old_libs=yes
++	fi
+ 
+-	# Read the .la file
+-	func_source "$lib"
++	test -n "$vinfo" && \
++	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+ 
+-	# Convert "-framework foo" to "foo.ltframework"
+-	if test -n "$inherited_linker_flags"; then
+-	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+-	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+-	    case " $new_inherited_linker_flags " in
+-	      *" $tmp_inherited_linker_flag "*) ;;
+-	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+-	    esac
+-	  done
+-	fi
+-	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+-	if test "$linkmode,$pass" = "lib,link" ||
+-	   test "$linkmode,$pass" = "prog,scan" ||
+-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+-	fi
++	test -n "$release" && \
++	  func_warning "\`-release' is ignored for convenience libraries"
++      else
+ 
+-	if test "$pass" = conv; then
+-	  # Only check for convenience libraries
+-	  deplibs="$lib $deplibs"
+-	  if test -z "$libdir"; then
+-	    if test -z "$old_library"; then
+-	      func_fatal_error "cannot find name of link library for \`$lib'"
+-	    fi
+-	    # It is a libtool convenience library, so add in its objects.
+-	    convenience="$convenience $ladir/$objdir/$old_library"
+-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+-	    func_fatal_error "\`$lib' is not a convenience library"
+-	  fi
+-	  tmp_libs=
+-	  for deplib in $dependency_libs; do
+-	    deplibs="$deplib $deplibs"
+-	    if $opt_duplicate_deps ; then
+-	      case "$tmp_libs " in
+-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	      esac
+-	    fi
+-	    tmp_libs="$tmp_libs $deplib"
+-	  done
+-	  continue
+-	fi # $pass = conv
++	# Parse the version information argument.
++	save_ifs="$IFS"; IFS=':'
++	set dummy $vinfo 0 0 0
++	shift
++	IFS="$save_ifs"
+ 
++	test -n "$7" && \
++	  func_fatal_help "too many parameters to \`-version-info'"
+ 
+-	# Get the name of the library we link against.
+-	linklib=
+-	for l in $old_library $library_names; do
+-	  linklib="$l"
+-	done
+-	if test -z "$linklib"; then
+-	  func_fatal_error "cannot find name of link library for \`$lib'"
+-	fi
++	# convert absolute version numbers to libtool ages
++	# this retains compatibility with .la files and attempts
++	# to make the code below a bit more comprehensible
+ 
+-	# This library was specified with -dlopen.
+-	if test "$pass" = dlopen; then
+-	  if test -z "$libdir"; then
+-	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+-	  fi
+-	  if test -z "$dlname" ||
+-	     test "$dlopen_support" != yes ||
+-	     test "$build_libtool_libs" = no; then
+-	    # If there is no dlname, no dlopen support or we're linking
+-	    # statically, we need to preload.  We also need to preload any
+-	    # dependent libraries so libltdl's deplib preloader doesn't
+-	    # bomb out in the load deplibs phase.
+-	    dlprefiles="$dlprefiles $lib $dependency_libs"
+-	  else
+-	    newdlfiles="$newdlfiles $lib"
+-	  fi
+-	  continue
+-	fi # $pass = dlopen
++	case $vinfo_number in
++	yes)
++	  number_major="$1"
++	  number_minor="$2"
++	  number_revision="$3"
++	  #
++	  # There are really only two kinds -- those that
++	  # use the current revision as the major version
++	  # and those that subtract age and use age as
++	  # a minor version.  But, then there is irix
++	  # which has an extra 1 added just for fun
++	  #
++	  case $version_type in
++	  darwin|linux|osf|windows)
++	    current=`expr $number_major + $number_minor`
++	    age="$number_minor"
++	    revision="$number_revision"
++	    ;;
++	  freebsd-aout|freebsd-elf|sunos)
++	    current="$number_major"
++	    revision="$number_minor"
++	    age="0"
++	    ;;
++	  irix|nonstopux)
++	    current=`expr $number_major + $number_minor - 1`
++	    age="$number_minor"
++	    revision="$number_minor"
++	    ;;
++	  *)
++	    $echo "$modename: unknown library version type \`$version_type'" 1>&2
++	    $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
++	    exit $EXIT_FAILURE
++	    ;;
++	  esac
++	  ;;
++	no)
++	  current="$1"
++	  revision="$2"
++	  age="$3"
++	  ;;
++	esac
+ 
+-	# We need an absolute path.
+-	case $ladir in
+-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
++	# Check that each of the things are valid numbers.
++	case $current in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ 	*)
+-	  abs_ladir=`cd "$ladir" && pwd`
+-	  if test -z "$abs_ladir"; then
+-	    func_warning "cannot determine absolute directory name of \`$ladir'"
+-	    func_warning "passing it literally to the linker, although it might fail"
+-	    abs_ladir="$ladir"
+-	  fi
++	  func_error "CURRENT \`$current' must be a nonnegative integer"
++	  func_fatal_error "\`$vinfo' is not valid version information"
+ 	  ;;
+ 	esac
+-	func_basename "$lib"
+-	laname="$func_basename_result"
+ 
+-	# Find the relevant object directory and library name.
+-	if test "X$installed" = Xyes; then
+-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+-	    func_warning "library \`$lib' was moved."
+-	    dir="$ladir"
+-	    absdir="$abs_ladir"
+-	    libdir="$abs_ladir"
+-	  else
+-	    dir="$libdir"
+-	    absdir="$libdir"
+-	  fi
+-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+-	else
+-	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+-	    dir="$ladir"
+-	    absdir="$abs_ladir"
+-	    # Remove this search path later
+-	    notinst_path="$notinst_path $abs_ladir"
+-	  else
+-	    dir="$ladir/$objdir"
+-	    absdir="$abs_ladir/$objdir"
+-	    # Remove this search path later
+-	    notinst_path="$notinst_path $abs_ladir"
+-	  fi
+-	fi # $installed = yes
+-	func_stripname 'lib' '.la' "$laname"
+-	name=$func_stripname_result
++	case $revision in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++	*)
++	  func_error "REVISION \`$revision' must be a nonnegative integer"
++	  func_fatal_error "\`$vinfo' is not valid version information"
++	  ;;
++	esac
+ 
+-	# This library was specified with -dlpreopen.
+-	if test "$pass" = dlpreopen; then
+-	  if test -z "$libdir" && test "$linkmode" = prog; then
+-	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+-	  fi
+-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+-	  # are required to link).
+-	  if test -n "$old_library"; then
+-	    newdlprefiles="$newdlprefiles $dir/$old_library"
+-	    # Keep a list of preopened convenience libraries to check
+-	    # that they are being used correctly in the link pass.
+-	    test -z "$libdir" && \
+-		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
+-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+-	  elif test -n "$dlname"; then
+-	    newdlprefiles="$newdlprefiles $dir/$dlname"
+-	  else
+-	    newdlprefiles="$newdlprefiles $dir/$linklib"
+-	  fi
+-	fi # $pass = dlpreopen
++	case $age in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++	*)
++	  func_error "AGE \`$age' must be a nonnegative integer"
++	  func_fatal_error "\`$vinfo' is not valid version information"
++	  ;;
++	esac
+ 
+-	if test -z "$libdir"; then
+-	  # Link the convenience library
+-	  if test "$linkmode" = lib; then
+-	    deplibs="$dir/$old_library $deplibs"
+-	  elif test "$linkmode,$pass" = "prog,link"; then
+-	    compile_deplibs="$dir/$old_library $compile_deplibs"
+-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+-	  else
+-	    deplibs="$lib $deplibs" # used for prog,scan pass
+-	  fi
+-	  continue
++	if test "$age" -gt "$current"; then
++	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
++	  func_fatal_error "\`$vinfo' is not valid version information"
+ 	fi
+ 
++	# Calculate the version variables.
++	major=
++	versuffix=
++	verstring=
++	case $version_type in
++	none) ;;
+ 
+-	if test "$linkmode" = prog && test "$pass" != link; then
+-	  newlib_search_path="$newlib_search_path $ladir"
+-	  deplibs="$lib $deplibs"
++	darwin)
++	  # Like Linux, but with the current version available in
++	  # verstring for coding it into the library header
++	  major=.`expr $current - $age`
++	  versuffix="$major.$age.$revision"
++	  # Darwin ld doesn't like 0 for these options...
++	  minor_current=`expr $current + 1`
++	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
++	  ;;
+ 
+-	  linkalldeplibs=no
+-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+-	     test "$build_libtool_libs" = no; then
+-	    linkalldeplibs=yes
+-	  fi
++	freebsd-aout)
++	  major=".$current"
++	  versuffix=".$current.$revision";
++	  ;;
+ 
+-	  tmp_libs=
+-	  for deplib in $dependency_libs; do
+-	    case $deplib in
+-	    -L*) func_stripname '-L' '' "$deplib"
+-	         newlib_search_path="$newlib_search_path $func_stripname_result"
+-		 ;;
+-	    esac
+-	    # Need to link against all dependency_libs?
+-	    if test "$linkalldeplibs" = yes; then
+-	      deplibs="$deplib $deplibs"
+-	    else
+-	      # Need to hardcode shared library paths
+-	      # or/and link against static libraries
+-	      newdependency_libs="$deplib $newdependency_libs"
+-	    fi
+-	    if $opt_duplicate_deps ; then
+-	      case "$tmp_libs " in
+-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	      esac
+-	    fi
+-	    tmp_libs="$tmp_libs $deplib"
+-	  done # for deplib
+-	  continue
+-	fi # $linkmode = prog...
++	freebsd-elf)
++	  major=".$current"
++	  versuffix=".$current"
++	  ;;
+ 
+-	if test "$linkmode,$pass" = "prog,link"; then
+-	  if test -n "$library_names" &&
+-	     { { test "$prefer_static_libs" = no ||
+-	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+-	       test -z "$old_library"; }; then
+-	    # We need to hardcode the library path
+-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+-	      # Make sure the rpath contains only unique directories.
+-	      case "$temp_rpath:" in
+-	      *"$absdir:"*) ;;
+-	      *) temp_rpath="$temp_rpath$absdir:" ;;
+-	      esac
+-	    fi
++	irix | nonstopux)
++	  major=`expr $current - $age + 1`
+ 
+-	    # Hardcode the library path.
+-	    # Skip directories that are in the system default run-time
+-	    # search path.
+-	    case " $sys_lib_dlsearch_path " in
+-	    *" $absdir "*) ;;
+-	    *)
+-	      case "$compile_rpath " in
+-	      *" $absdir "*) ;;
+-	      *) compile_rpath="$compile_rpath $absdir"
+-	      esac
+-	      ;;
+-	    esac
+-	    case " $sys_lib_dlsearch_path " in
+-	    *" $libdir "*) ;;
+-	    *)
+-	      case "$finalize_rpath " in
+-	      *" $libdir "*) ;;
+-	      *) finalize_rpath="$finalize_rpath $libdir"
+-	      esac
+-	      ;;
+-	    esac
+-	  fi # $linkmode,$pass = prog,link...
++	  case $version_type in
++	    nonstopux) verstring_prefix=nonstopux ;;
++	    *)         verstring_prefix=sgi ;;
++	  esac
++	  verstring="$verstring_prefix$major.$revision"
+ 
+-	  if test "$alldeplibs" = yes &&
+-	     { test "$deplibs_check_method" = pass_all ||
+-	       { test "$build_libtool_libs" = yes &&
+-		 test -n "$library_names"; }; }; then
+-	    # We only need to search for static libraries
+-	    continue
+-	  fi
+-	fi
++	  # Add in all the interfaces that we are compatible with.
++	  loop=$revision
++	  while test "$loop" -ne 0; do
++	    iface=`expr $revision - $loop`
++	    loop=`expr $loop - 1`
++	    verstring="$verstring_prefix$major.$iface:$verstring"
++	  done
+ 
+-	link_static=no # Whether the deplib will be linked statically
+-	use_static_libs=$prefer_static_libs
+-	if test "$use_static_libs" = built && test "$installed" = yes; then
+-	  use_static_libs=no
+-	fi
+-	if test -n "$library_names" &&
+-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+-	  case $host in
+-	  *cygwin* | *mingw*)
+-	      # No point in relinking DLLs because paths are not encoded
+-	      notinst_deplibs="$notinst_deplibs $lib"
+-	      need_relink=no
++	  # Before this point, $major must not contain `.'.
++	  major=.$major
++	  versuffix="$major.$revision"
++	  ;;
++
++	linux)
++	  major=.`expr $current - $age`
++	  versuffix="$major.$age.$revision"
++	  ;;
++
++	osf)
++	  major=.`expr $current - $age`
++	  versuffix=".$current.$age.$revision"
++	  verstring="$current.$age.$revision"
++
++	  # Add in all the interfaces that we are compatible with.
++	  loop=$age
++	  while test "$loop" -ne 0; do
++	    iface=`expr $current - $loop`
++	    loop=`expr $loop - 1`
++	    verstring="$verstring:${iface}.0"
++	  done
++
++	  # Make executables depend on our current version.
++	  verstring="$verstring:${current}.0"
++	  ;;
++
++	qnx)
++	  major=".$current"
++	  versuffix=".$current"
++	  ;;
++
++	sunos)
++	  major=".$current"
++	  versuffix=".$current.$revision"
++	  ;;
++
++	windows)
++	  # Use '-' rather than '.', since we only want one
++	  # extension on DOS 8.3 filesystems.
++	  major=`expr $current - $age`
++	  versuffix="-$major"
++	  ;;
++
++	*)
++	  func_fatal_configuration "unknown library version type \`$version_type'"
++	  ;;
++	esac
++
++	# Clear the version info if we defaulted, and they specified a release.
++	if test -z "$vinfo" && test -n "$release"; then
++	  major=
++	  case $version_type in
++	  darwin)
++	    # we can't check for "0.0" in archive_cmds due to quoting
++	    # problems, so we reset it completely
++	    verstring=
+ 	    ;;
+ 	  *)
+-	    if test "$installed" = no; then
+-	      notinst_deplibs="$notinst_deplibs $lib"
+-	      need_relink=yes
+-	    fi
++	    verstring="0.0"
+ 	    ;;
+ 	  esac
+-	  # This is a shared library
+-
+-	  # Warn about portability, can't link against -module's on some
+-	  # systems (darwin).  Don't bleat about dlopened modules though!
+-	  dlopenmodule=""
+-	  for dlpremoduletest in $dlprefiles; do
+-	    if test "X$dlpremoduletest" = "X$lib"; then
+-	      dlopenmodule="$dlpremoduletest"
+-	      break
+-	    fi
+-	  done
+-	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+-	    $ECHO
+-	    if test "$linkmode" = prog; then
+-	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+-	    else
+-	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+-	    fi
+-	    $ECHO "*** $linklib is not portable!"
++	  if test "$need_version" = no; then
++	    versuffix=
++	  else
++	    versuffix=".0.0"
+ 	  fi
+-	  if test "$linkmode" = lib &&
+-	     test "$hardcode_into_libs" = yes; then
+-	    # Hardcode the library path.
+-	    # Skip directories that are in the system default run-time
+-	    # search path.
+-	    case " $sys_lib_dlsearch_path " in
+-	    *" $absdir "*) ;;
+-	    *)
+-	      case "$compile_rpath " in
+-	      *" $absdir "*) ;;
+-	      *) compile_rpath="$compile_rpath $absdir"
+-	      esac
+-	      ;;
+-	    esac
+-	    case " $sys_lib_dlsearch_path " in
+-	    *" $libdir "*) ;;
+-	    *)
+-	      case "$finalize_rpath " in
+-	      *" $libdir "*) ;;
+-	      *) finalize_rpath="$finalize_rpath $libdir"
+-	      esac
+-	      ;;
+-	    esac
++	fi
++
++	# Remove version info from name if versioning should be avoided
++	if test "$avoid_version" = yes && test "$need_version" = no; then
++	  major=
++	  versuffix=
++	  verstring=""
++	fi
++
++	# Check to see if the archive will have undefined symbols.
++	if test "$allow_undefined" = yes; then
++	  if test "$allow_undefined_flag" = unsupported; then
++	    func_warning "undefined symbols not allowed in $host shared libraries"
++	    build_libtool_libs=no
++	    build_old_libs=yes
+ 	  fi
++	else
++	  # Don't allow undefined symbols.
++	  allow_undefined_flag="$no_undefined_flag"
++	fi
+ 
+-	  if test -n "$old_archive_from_expsyms_cmds"; then
+-	    # figure out the soname
+-	    set dummy $library_names
+-	    shift
+-	    realname="$1"
+-	    shift
+-	    libname=`eval "\\$ECHO \"$libname_spec\""`
+-	    # use dlname if we got it. it's perfectly good, no?
+-	    if test -n "$dlname"; then
+-	      soname="$dlname"
+-	    elif test -n "$soname_spec"; then
+-	      # bleh windows
+-	      case $host in
+-	      *cygwin* | mingw*)
+-		major=`expr $current - $age`
+-		versuffix="-$major"
+-		;;
+-	      esac
+-	      eval soname=\"$soname_spec\"
+-	    else
+-	      soname="$realname"
+-	    fi
++      fi
+ 
+-	    # Make a new name for the extract_expsyms_cmds to use
+-	    soroot="$soname"
+-	    func_basename "$soroot"
+-	    soname="$func_basename_result"
+-	    func_stripname 'lib' '.dll' "$soname"
+-	    newlib=libimp-$func_stripname_result.a
++      func_generate_dlsyms "$libname" "$libname" "yes"
++      libobjs="$libobjs $symfileobj"
+ 
+-	    # If the library has no export list, then create one now
+-	    if test -f "$output_objdir/$soname-def"; then :
+-	    else
+-	      func_echo "extracting exported symbol list from \`$soname'"
+-	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+-	    fi
++      if test "$mode" != relink; then
++	# Remove our outputs, but don't remove object files since they
++	# may have been created when compiling PIC objects.
++	removelist=
++	tempremovelist=`$ECHO "$output_objdir/*"`
++	for p in $tempremovelist; do
++	  case $p in
++	    *.$objext)
++	       ;;
++	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
++	       if test "X$precious_files_regex" != "X"; then
++		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
++		 then
++		   continue
++		 fi
++	       fi
++	       removelist="$removelist $p"
++	       ;;
++	    *) ;;
++	  esac
++	done
++	test -n "$removelist" && \
++	  func_show_eval "${RM}r \$removelist"
++      fi
+ 
+-	    # Create $newlib
+-	    if test -f "$output_objdir/$newlib"; then :; else
+-	      func_echo "generating import library for \`$soname'"
+-	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+-	    fi
+-	    # make sure the library variables are pointing to the new library
+-	    dir=$output_objdir
+-	    linklib=$newlib
+-	  fi # test -n "$old_archive_from_expsyms_cmds"
++      # Now set the variables for building old libraries.
++      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
++	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+ 
+-	  if test "$linkmode" = prog || test "$mode" != relink; then
+-	    add_shlibpath=
+-	    add_dir=
+-	    add=
+-	    lib_linked=yes
+-	    case $hardcode_action in
+-	    immediate | unsupported)
+-	      if test "$hardcode_direct" = no; then
+-		add="$dir/$linklib"
+-		case $host in
+-		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+-		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+-		    *-*-unixware7*) add_dir="-L$dir" ;;
+-		  *-*-darwin* )
+-		    # if the lib is a (non-dlopened) module then we can not
+-		    # link against it, someone is ignoring the earlier warnings
+-		    if /usr/bin/file -L $add 2> /dev/null |
+-			 $GREP ": [^:]* bundle" >/dev/null ; then
+-		      if test "X$dlopenmodule" != "X$lib"; then
+-			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+-			if test -z "$old_library" ; then
+-			  $ECHO
+-			  $ECHO "*** And there doesn't seem to be a static archive available"
+-			  $ECHO "*** The link will probably fail, sorry"
+-			else
+-			  add="$dir/$old_library"
+-			fi
+-		      elif test -n "$old_library"; then
+-			add="$dir/$old_library"
+-		      fi
+-		    fi
+-		esac
+-	      elif test "$hardcode_minus_L" = no; then
+-		case $host in
+-		*-*-sunos*) add_shlibpath="$dir" ;;
+-		esac
+-		add_dir="-L$dir"
+-		add="-l$name"
+-	      elif test "$hardcode_shlibpath_var" = no; then
+-		add_shlibpath="$dir"
+-		add="-l$name"
++	# Transform .lo files to .o files.
++	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
++      fi
++
++      # Eliminate all temporary directories.
++      for path in $notinst_path; do
++	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e 's% $path % %g'`
++	deplibs=`$ECHO "X$deplibs " | $Xsed -e 's% -L$path % %g'`
++	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e 's% -L$path % %g'`
++      done
++
++      if test -n "$xrpath"; then
++	# If the user specified any rpath flags, then add them.
++	temp_xrpath=
++	for libdir in $xrpath; do
++	  temp_xrpath="$temp_xrpath -R$libdir"
++	  case "$finalize_rpath " in
++	  *" $libdir "*) ;;
++	  *) finalize_rpath="$finalize_rpath $libdir" ;;
++	  esac
++	done
++	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
++	  dependency_libs="$temp_xrpath $dependency_libs"
++	fi
++      fi
++
++      # Make sure dlfiles contains only unique files that won't be dlpreopened
++      old_dlfiles="$dlfiles"
++      dlfiles=
++      for lib in $old_dlfiles; do
++	case " $dlprefiles $dlfiles " in
++	*" $lib "*) ;;
++	*) dlfiles="$dlfiles $lib" ;;
++	esac
++      done
++
++      # Make sure dlprefiles contains only unique files
++      old_dlprefiles="$dlprefiles"
++      dlprefiles=
++      for lib in $old_dlprefiles; do
++	case "$dlprefiles " in
++	*" $lib "*) ;;
++	*) dlprefiles="$dlprefiles $lib" ;;
++	esac
++      done
++
++      if test "$build_libtool_libs" = yes; then
++	if test -n "$rpath"; then
++	  case $host in
++	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
++	    # these systems don't actually have a c library (as such)!
++	    ;;
++	  *-*-rhapsody* | *-*-darwin1.[012])
++	    # Rhapsody C library is in the System framework
++	    deplibs="$deplibs System.ltframework"
++	    ;;
++	  *-*-netbsd*)
++	    # Don't link with libc until the a.out ld.so is fixed.
++	    ;;
++	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	    # Do not include libc due to us having libc/libc_r.
++	    ;;
++	  *-*-sco3.2v5* | *-*-sco5v6*)
++	    # Causes problems with __ctype
++	    ;;
++	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++	    # Compiler inserts libc in the correct place for threads to work
++ 	    ;;
++ 	  *)
++	    # Add libc to deplibs on all other systems if necessary.
++	    if test "$build_libtool_need_lc" = "yes"; then
++	      deplibs="$deplibs -lc"
++	    fi
++	    ;;
++	  esac
++	fi
++
++	# Transform deplibs into only deplibs that can be linked in shared.
++	name_save=$name
++	libname_save=$libname
++	release_save=$release
++	versuffix_save=$versuffix
++	major_save=$major
++	# I'm not sure if I'm treating the release correctly.  I think
++	# release should show up in the -l (ie -lgmp5) so we don't want to
++	# add it in twice.  Is that correct?
++	release=""
++	versuffix=""
++	major=""
++	newdeplibs=
++	droppeddeps=no
++	case $deplibs_check_method in
++	pass_all)
++	  # Don't check for shared/static.  Everything works.
++	  # This might be a little naive.  We might want to check
++	  # whether the library exists or not.  But this is on
++	  # osf3 & osf4 and I'm not really sure... Just
++	  # implementing what was already the behavior.
++	  newdeplibs=$deplibs
++	  ;;
++	test_compile)
++	  # This code stresses the "libraries are programs" paradigm to its
++	  # limits. Maybe even breaks it.  We compile a program, linking it
++	  # against the deplibs as a proxy for the library.  Then we can check
++	  # whether they linked in statically or dynamically with ldd.
++	  $opt_dry_run || $RM conftest.c
++	  cat > conftest.c <<EOF
++	  int main() { return 0; }
++EOF
++	  $opt_dry_run || $RM conftest
++	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
++	  if test "$?" -eq 0 ; then
++	    ldd_output=`ldd conftest`
++	    for i in $deplibs; do
++	      name=`expr $i : '-l\(.*\)'`
++	      # If $name is empty we are operating on a -L argument.
++	      if test "$name" != "" && test "$name" -ne "0"; then
++		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		  case " $predeps $postdeps " in
++		  *" $i "*)
++		    newdeplibs="$newdeplibs $i"
++		    i=""
++		    ;;
++		  esac
++		fi
++		if test -n "$i" ; then
++		  libname=`eval "\\$ECHO \"$libname_spec\""`
++		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
++		  set dummy $deplib_matches; shift
++		  deplib_match=$1
++		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++		    newdeplibs="$newdeplibs $i"
++		  else
++		    droppeddeps=yes
++		    $ECHO
++		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
++		    $ECHO "*** I have the capability to make that library automatically link in when"
++		    $ECHO "*** you link to this library.  But I can only do this if you have a"
++		    $ECHO "*** shared version of the library, which I believe you do not have"
++		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
++		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
++		  fi
++		fi
+ 	      else
+-		lib_linked=no
++		newdeplibs="$newdeplibs $i"
+ 	      fi
+-	      ;;
+-	    relink)
+-	      if test "$hardcode_direct" = yes &&
+-	         test "$hardcode_direct_absolute" = no; then
+-		add="$dir/$linklib"
+-	      elif test "$hardcode_minus_L" = yes; then
+-		add_dir="-L$dir"
+-		# Try looking first in the location we're being installed to.
+-		if test -n "$inst_prefix_dir"; then
+-		  case $libdir in
+-		    [\\/]*)
+-		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
++	    done
++	  else
++	    # Error occurred in the first compile.  Let's try to salvage
++	    # the situation: Compile a separate program for each library.
++	    for i in $deplibs; do
++	      name=`expr $i : '-l\(.*\)'`
++	      # If $name is empty we are operating on a -L argument.
++	      if test "$name" != "" && test "$name" != "0"; then
++		$opt_dry_run || $RM conftest
++		$LTCC $LTCFLAGS -o conftest conftest.c $i
++		# Did it work?
++		if test "$?" -eq 0 ; then
++		  ldd_output=`ldd conftest`
++		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		    case " $predeps $postdeps " in
++		    *" $i "*)
++		      newdeplibs="$newdeplibs $i"
++		      i=""
+ 		      ;;
+-		  esac
++		    esac
++		  fi
++		  if test -n "$i" ; then
++		    libname=`eval "\\$ECHO \"$libname_spec\""`
++		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
++		    set dummy $deplib_matches; shift
++		    deplib_match=$1
++		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++		      newdeplibs="$newdeplibs $i"
++		    else
++		      droppeddeps=yes
++		      $ECHO
++		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
++		      $ECHO "*** I have the capability to make that library automatically link in when"
++		      $ECHO "*** you link to this library.  But I can only do this if you have a"
++		      $ECHO "*** shared version of the library, which you do not appear to have"
++		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
++		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
++		    fi
++		  fi
++		else
++		  droppeddeps=yes
++		  $ECHO
++		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
++		  $ECHO "***  make it link in!  You will probably need to install it or some"
++		  $ECHO "*** library that it depends on before this library will be fully"
++		  $ECHO "*** functional.  Installing it before continuing would be even better."
+ 		fi
+-		add="-l$name"
+-	      elif test "$hardcode_shlibpath_var" = yes; then
+-		add_shlibpath="$dir"
+-		add="-l$name"
+ 	      else
+-		lib_linked=no
++		newdeplibs="$newdeplibs $i"
+ 	      fi
+-	      ;;
+-	    *) lib_linked=no ;;
+-	    esac
+-
+-	    if test "$lib_linked" != yes; then
+-	      func_fatal_configuration "unsupported hardcode properties"
+-	    fi
+-
+-	    if test -n "$add_shlibpath"; then
+-	      case :$compile_shlibpath: in
+-	      *":$add_shlibpath:"*) ;;
+-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+-	      esac
+-	    fi
+-	    if test "$linkmode" = prog; then
+-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+-	    else
+-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+-	      test -n "$add" && deplibs="$add $deplibs"
+-	      if test "$hardcode_direct" != yes &&
+-		 test "$hardcode_minus_L" != yes &&
+-		 test "$hardcode_shlibpath_var" = yes; then
+-		case :$finalize_shlibpath: in
+-		*":$libdir:"*) ;;
+-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++	    done
++	  fi
++	  ;;
++	file_magic*)
++	  set dummy $deplibs_check_method; shift
++	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++	  for a_deplib in $deplibs; do
++	    name=`expr $a_deplib : '-l\(.*\)'`
++	    # If $name is empty we are operating on a -L argument.
++	    if test "$name" != "" && test  "$name" != "0"; then
++	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		case " $predeps $postdeps " in
++		*" $a_deplib "*)
++		  newdeplibs="$newdeplibs $a_deplib"
++		  a_deplib=""
++		  ;;
+ 		esac
+ 	      fi
+-	    fi
+-	  fi
+-
+-	  if test "$linkmode" = prog || test "$mode" = relink; then
+-	    add_shlibpath=
+-	    add_dir=
+-	    add=
+-	    # Finalize command for both is simple: just hardcode it.
+-	    if test "$hardcode_direct" = yes &&
+-	       test "$hardcode_direct_absolute" = no; then
+-	      add="$libdir/$linklib"
+-	    elif test "$hardcode_minus_L" = yes; then
+-	      add_dir="-L$libdir"
+-	      add="-l$name"
+-	    elif test "$hardcode_shlibpath_var" = yes; then
+-	      case :$finalize_shlibpath: in
+-	      *":$libdir:"*) ;;
+-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+-	      esac
+-	      add="-l$name"
+-	    elif test "$hardcode_automatic" = yes; then
+-	      if test -n "$inst_prefix_dir" &&
+-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+-		add="$inst_prefix_dir$libdir/$linklib"
+-	      else
+-		add="$libdir/$linklib"
++	      if test -n "$a_deplib" ; then
++		libname=`eval "\\$ECHO \"$libname_spec\""`
++		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++		  for potent_lib in $potential_libs; do
++		      # Follow soft links.
++		      if ls -lLd "$potent_lib" 2>/dev/null |
++			 $GREP " -> " >/dev/null; then
++			continue
++		      fi
++		      # The statement above tries to avoid entering an
++		      # endless loop below, in case of cyclic links.
++		      # We might still enter an endless loop, since a link
++		      # loop can be closed while we follow links,
++		      # but so what?
++		      potlib="$potent_lib"
++		      while test -h "$potlib" 2>/dev/null; do
++			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
++			case $potliblink in
++			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
++			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
++			esac
++		      done
++		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
++			 $SED -e 10q |
++			 $EGREP "$file_magic_regex" > /dev/null; then
++			newdeplibs="$newdeplibs $a_deplib"
++			a_deplib=""
++			break 2
++		      fi
++		  done
++		done
+ 	      fi
+-	    else
+-	      # We cannot seem to hardcode it, guess we'll fake it.
+-	      add_dir="-L$libdir"
+-	      # Try looking first in the location we're being installed to.
+-	      if test -n "$inst_prefix_dir"; then
+-		case $libdir in
+-		  [\\/]*)
+-		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
+-		    ;;
+-		esac
++	      if test -n "$a_deplib" ; then
++		droppeddeps=yes
++		$ECHO
++		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
++		$ECHO "*** I have the capability to make that library automatically link in when"
++		$ECHO "*** you link to this library.  But I can only do this if you have a"
++		$ECHO "*** shared version of the library, which you do not appear to have"
++		$ECHO "*** because I did check the linker path looking for a file starting"
++		if test -z "$potlib" ; then
++		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
++		else
++		  $ECHO "*** with $libname and none of the candidates passed a file format test"
++		  $ECHO "*** using a file magic. Last file checked: $potlib"
++		fi
+ 	      fi
+-	      add="-l$name"
+-	    fi
+-
+-	    if test "$linkmode" = prog; then
+-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ 	    else
+-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+-	      test -n "$add" && deplibs="$add $deplibs"
++	      # Add a -L argument.
++	      newdeplibs="$newdeplibs $a_deplib"
+ 	    fi
+-	  fi
+-	elif test "$linkmode" = prog; then
+-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+-	  # is not unsupported.  This is valid on all known static and
+-	  # shared platforms.
+-	  if test "$hardcode_direct" != unsupported; then
+-	    test -n "$old_library" && linklib="$old_library"
+-	    compile_deplibs="$dir/$linklib $compile_deplibs"
+-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+-	  else
+-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+-	  fi
+-	elif test "$build_libtool_libs" = yes; then
+-	  # Not a shared library
+-	  if test "$deplibs_check_method" != pass_all; then
+-	    # We're trying link a shared library against a static one
+-	    # but the system doesn't support it.
+-
+-	    # Just print a warning and add the library to dependency_libs so
+-	    # that the program can be linked against the static library.
+-	    $ECHO
+-	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+-	    $ECHO "*** I have the capability to make that library automatically link in when"
+-	    $ECHO "*** you link to this library.  But I can only do this if you have a"
+-	    $ECHO "*** shared version of the library, which you do not appear to have."
+-	    if test "$module" = yes; then
+-	      $ECHO "*** But as you try to build a module library, libtool will still create "
+-	      $ECHO "*** a static module, that should work as long as the dlopening application"
+-	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
+-	      if test -z "$global_symbol_pipe"; then
+-		$ECHO
+-		$ECHO "*** However, this would only work if libtool was able to extract symbol"
+-		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+-		$ECHO "*** not find such a program.  So, this module is probably useless."
+-		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
++	  done # Gone through all deplibs.
++	  ;;
++	match_pattern*)
++	  set dummy $deplibs_check_method; shift
++	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++	  for a_deplib in $deplibs; do
++	    name=`expr $a_deplib : '-l\(.*\)'`
++	    # If $name is empty we are operating on a -L argument.
++	    if test -n "$name" && test "$name" != "0"; then
++	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		case " $predeps $postdeps " in
++		*" $a_deplib "*)
++		  newdeplibs="$newdeplibs $a_deplib"
++		  a_deplib=""
++		  ;;
++		esac
+ 	      fi
+-	      if test "$build_old_libs" = no; then
+-		build_libtool_libs=module
+-		build_old_libs=yes
+-	      else
+-		build_libtool_libs=no
++	      if test -n "$a_deplib" ; then
++		libname=`eval "\\$ECHO \"$libname_spec\""`
++		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++		  for potent_lib in $potential_libs; do
++		    potlib="$potent_lib" # see symlink-check above in file_magic test
++		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
++		       $EGREP "$match_pattern_regex" > /dev/null; then
++		      newdeplibs="$newdeplibs $a_deplib"
++		      a_deplib=""
++		      break 2
++		    fi
++		  done
++		done
++	      fi
++	      if test -n "$a_deplib" ; then
++		droppeddeps=yes
++		$ECHO
++		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
++		$ECHO "*** I have the capability to make that library automatically link in when"
++		$ECHO "*** you link to this library.  But I can only do this if you have a"
++		$ECHO "*** shared version of the library, which you do not appear to have"
++		$ECHO "*** because I did check the linker path looking for a file starting"
++		if test -z "$potlib" ; then
++		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
++		else
++		  $ECHO "*** with $libname and none of the candidates passed a file format test"
++		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
++		fi
+ 	      fi
++	    else
++	      # Add a -L argument.
++	      newdeplibs="$newdeplibs $a_deplib"
+ 	    fi
+-	  else
+-	    deplibs="$dir/$old_library $deplibs"
+-	    link_static=yes
+-	  fi
+-	fi # link shared/static library?
+-
+-	if test "$linkmode" = lib; then
+-	  if test -n "$dependency_libs" &&
+-	     { test "$hardcode_into_libs" != yes ||
+-	       test "$build_old_libs" = yes ||
+-	       test "$link_static" = yes; }; then
+-	    # Extract -R from dependency_libs
+-	    temp_deplibs=
+-	    for libdir in $dependency_libs; do
+-	      case $libdir in
+-	      -R*) func_stripname '-R' '' "$libdir"
+-	           temp_xrpath=$func_stripname_result
+-		   case " $xrpath " in
+-		   *" $temp_xrpath "*) ;;
+-		   *) xrpath="$xrpath $temp_xrpath";;
+-		   esac;;
+-	      *) temp_deplibs="$temp_deplibs $libdir";;
+-	      esac
++	  done # Gone through all deplibs.
++	  ;;
++	none | unknown | *)
++	  newdeplibs=""
++	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
++	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
++	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++	    for i in $predeps $postdeps ; do
++	      # can't use Xsed below, because $i might contain '/'
++	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
+ 	    done
+-	    dependency_libs="$temp_deplibs"
+ 	  fi
+-
+-	  newlib_search_path="$newlib_search_path $absdir"
+-	  # Link against this library
+-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+-	  # ... and its dependency_libs
+-	  tmp_libs=
+-	  for deplib in $dependency_libs; do
+-	    newdependency_libs="$deplib $newdependency_libs"
+-	    if $opt_duplicate_deps ; then
+-	      case "$tmp_libs " in
+-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	      esac
++	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' |
++	     $GREP . >/dev/null; then
++	    $ECHO
++	    if test "X$deplibs_check_method" = "Xnone"; then
++	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
++	    else
++	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
+ 	    fi
+-	    tmp_libs="$tmp_libs $deplib"
+-	  done
+-
+-	  if test "$link_all_deplibs" != no; then
+-	    # Add the search paths of all dependency libraries
+-	    for deplib in $dependency_libs; do
+-	      case $deplib in
+-	      -L*) path="$deplib" ;;
+-	      *.la)
+-	        func_dirname "$deplib" "" "."
+-		dir="$func_dirname_result"
+-		# We need an absolute path.
+-		case $dir in
+-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+-		*)
+-		  absdir=`cd "$dir" && pwd`
+-		  if test -z "$absdir"; then
+-		    func_warning "cannot determine absolute directory name of \`$dir'"
+-		    absdir="$dir"
+-		  fi
+-		  ;;
+-		esac
+-		if $GREP "^installed=no" $deplib > /dev/null; then
+-		case $host in
+-		*-*-darwin*)
+-		  depdepl=
+-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+-		  if test -n "$deplibrary_names" ; then
+-		    for tmp in $deplibrary_names ; do
+-		      depdepl=$tmp
+-		    done
+-		    if test -f "$absdir/$objdir/$depdepl" ; then
+-		      depdepl="$absdir/$objdir/$depdepl"
+-		      darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
+-		      darwin_install_name=`$ECHO $darwin_install_name`
+-                      if test -z "$darwin_install_name"; then
+-                          darwin_install_name=`otool64 -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
+-                          darwin_install_name=`$ECHO $darwin_install_name`
+-                      fi
+-		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+-		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+-		      path=
+-		    fi
+-		  fi
+-		  ;;
+-		*)
+-		  path="-L$absdir/$objdir"
+-		  ;;
+-		esac
+-		else
+-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+-		  test -z "$libdir" && \
+-		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+-		  test "$absdir" != "$libdir" && \
+-		    func_warning "\`$deplib' seems to be moved"
+-
+-		  path="-L$absdir"
+-		fi
+-		;;
+-	      esac
+-	      case " $deplibs " in
+-	      *" $path "*) ;;
+-	      *) deplibs="$path $deplibs" ;;
+-	      esac
+-	    done
+-	  fi # link_all_deplibs != no
+-	fi # linkmode = lib
+-      done # for deplib in $libs
+-      if test "$pass" = link; then
+-	if test "$linkmode" = "prog"; then
+-	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+-	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+-	else
+-	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+-	fi
+-      fi
+-      dependency_libs="$newdependency_libs"
+-      if test "$pass" = dlpreopen; then
+-	# Link the dlpreopened libraries before other libraries
+-	for deplib in $save_deplibs; do
+-	  deplibs="$deplib $deplibs"
+-	done
+-      fi
+-      if test "$pass" != dlopen; then
+-	if test "$pass" != conv; then
+-	  # Make sure lib_search_path contains only unique directories.
+-	  lib_search_path=
+-	  for dir in $newlib_search_path; do
+-	    case "$lib_search_path " in
+-	    *" $dir "*) ;;
+-	    *) lib_search_path="$lib_search_path $dir" ;;
+-	    esac
+-	  done
+-	  newlib_search_path=
+-	fi
+-
+-	if test "$linkmode,$pass" != "prog,link"; then
+-	  vars="deplibs"
+-	else
+-	  vars="compile_deplibs finalize_deplibs"
+-	fi
+-	for var in $vars dependency_libs; do
+-	  # Add libraries to $var in reverse order
+-	  eval tmp_libs=\"\$$var\"
+-	  new_libs=
+-	  for deplib in $tmp_libs; do
+-	    # FIXME: Pedantically, this is the right thing to do, so
+-	    #        that some nasty dependency loop isn't accidentally
+-	    #        broken:
+-	    #new_libs="$deplib $new_libs"
+-	    # Pragmatically, this seems to cause very few problems in
+-	    # practice:
+-	    case $deplib in
+-	    -L*) new_libs="$deplib $new_libs" ;;
+-	    -R*) ;;
+-	    *)
+-	      # And here is the reason: when a library appears more
+-	      # than once as an explicit dependence of a library, or
+-	      # is implicitly linked in more than once by the
+-	      # compiler, it is considered special, and multiple
+-	      # occurrences thereof are not removed.  Compare this
+-	      # with having the same library being listed as a
+-	      # dependency of multiple other libraries: in this case,
+-	      # we know (pedantically, we assume) the library does not
+-	      # need to be listed more than once, so we keep only the
+-	      # last copy.  This is not always right, but it is rare
+-	      # enough that we require users that really mean to play
+-	      # such unportable linking tricks to link the library
+-	      # using -Wl,-lname, so that libtool does not consider it
+-	      # for duplicate removal.
+-	      case " $specialdeplibs " in
+-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+-	      *)
+-		case " $new_libs " in
+-		*" $deplib "*) ;;
+-		*) new_libs="$deplib $new_libs" ;;
+-		esac
+-		;;
+-	      esac
+-	      ;;
+-	    esac
+-	  done
+-	  tmp_libs=
+-	  for deplib in $new_libs; do
+-	    case $deplib in
+-	    -L*)
+-	      case " $tmp_libs " in
+-	      *" $deplib "*) ;;
+-	      *) tmp_libs="$tmp_libs $deplib" ;;
+-	      esac
+-	      ;;
+-	    *) tmp_libs="$tmp_libs $deplib" ;;
+-	    esac
+-	  done
+-	  eval $var=\"$tmp_libs\"
+-	done # for var
+-      fi
+-      # Last step: remove runtime libs from dependency_libs
+-      # (they stay in deplibs)
+-      tmp_libs=
+-      for i in $dependency_libs ; do
+-	case " $predeps $postdeps $compiler_lib_search_path " in
+-	*" $i "*)
+-	  i=""
+-	  ;;
+-	esac
+-	if test -n "$i" ; then
+-	  tmp_libs="$tmp_libs $i"
+-	fi
+-      done
+-      dependency_libs=$tmp_libs
+-    done # for pass
+-    if test "$linkmode" = prog; then
+-      dlfiles="$newdlfiles"
+-    fi
+-    if test "$linkmode" = prog || test "$linkmode" = lib; then
+-      dlprefiles="$newdlprefiles"
+-    fi
+-
+-    case $linkmode in
+-    oldlib)
+-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+-	func_warning "\`-dlopen' is ignored for archives"
+-      fi
+-
+-      test -n "$deplibs" && \
+-	func_warning "\`-l' and \`-L' are ignored for archives"
+-
+-
+-      test -n "$rpath" && \
+-	func_warning "\`-rpath' is ignored for archives"
+-
+-      test -n "$xrpath" && \
+-	func_warning "\`-R' is ignored for archives"
+-
+-      test -n "$vinfo" && \
+-	func_warning "\`-version-info/-version-number' is ignored for archives"
+-
+-      test -n "$release" && \
+-	func_warning "\`-release' is ignored for archives"
+-
+-      test -n "$export_symbols$export_symbols_regex" && \
+-	func_warning "\`-export-symbols' is ignored for archives"
+-
+-      # Now set the variables for building old libraries.
+-      build_libtool_libs=no
+-      oldlibs="$output"
+-      objs="$objs$old_deplibs"
+-      ;;
+-
+-    lib)
+-      # Make sure we only generate libraries of the form `libNAME.la'.
+-      case $outputname in
+-      lib*)
+-	func_stripname 'lib' '.la' "$outputname"
+-	name=$func_stripname_result
+-	eval shared_ext=\"$shrext_cmds\"
+-	eval libname=\"$libname_spec\"
+-	;;
+-      *)
+-	test "$module" = no && \
+-	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+-
+-	if test "$need_lib_prefix" != no; then
+-	  # Add the "lib" prefix for modules if required
+-	  func_stripname '' '.la' "$outputname"
+-	  name=$func_stripname_result
+-	  eval shared_ext=\"$shrext_cmds\"
+-	  eval libname=\"$libname_spec\"
+-	else
+-	  func_stripname '' '.la' "$outputname"
+-	  libname=$func_stripname_result
+-	fi
+-	;;
+-      esac
+-
+-      if test -n "$objs"; then
+-	if test "$deplibs_check_method" != pass_all; then
+-	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+-	else
+-	  $ECHO
+-	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+-	  $ECHO "*** objects $objs is not portable!"
+-	  libobjs="$libobjs $objs"
+-	fi
+-      fi
+-
+-      test "$dlself" != no && \
+-	func_warning "\`-dlopen self' is ignored for libtool libraries"
+-
+-      set dummy $rpath
+-      shift
+-      test "$#" -gt 1 && \
+-	func_warning "ignoring multiple \`-rpath's for a libtool library"
+-
+-      install_libdir="$1"
+-
+-      oldlibs=
+-      if test -z "$rpath"; then
+-	if test "$build_libtool_libs" = yes; then
+-	  # Building a libtool convenience library.
+-	  # Some compilers have problems with a `.al' extension so
+-	  # convenience libraries should have the same extension an
+-	  # archive normally would.
+-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+-	  build_libtool_libs=convenience
+-	  build_old_libs=yes
+-	fi
+-
+-	test -n "$vinfo" && \
+-	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+-
+-	test -n "$release" && \
+-	  func_warning "\`-release' is ignored for convenience libraries"
+-      else
+-
+-	# Parse the version information argument.
+-	save_ifs="$IFS"; IFS=':'
+-	set dummy $vinfo 0 0 0
+-	shift
+-	IFS="$save_ifs"
+-
+-	test -n "$7" && \
+-	  func_fatal_help "too many parameters to \`-version-info'"
+-
+-	# convert absolute version numbers to libtool ages
+-	# this retains compatibility with .la files and attempts
+-	# to make the code below a bit more comprehensible
+-
+-	case $vinfo_number in
+-	yes)
+-	  number_major="$1"
+-	  number_minor="$2"
+-	  number_revision="$3"
+-	  #
+-	  # There are really only two kinds -- those that
+-	  # use the current revision as the major version
+-	  # and those that subtract age and use age as
+-	  # a minor version.  But, then there is irix
+-	  # which has an extra 1 added just for fun
+-	  #
+-	  case $version_type in
+-	  darwin|linux|osf|windows|none)
+-	    current=`expr $number_major + $number_minor`
+-	    age="$number_minor"
+-	    revision="$number_revision"
+-	    ;;
+-	  freebsd-aout|freebsd-elf|sunos)
+-	    current="$number_major"
+-	    revision="$number_minor"
+-	    age="0"
+-	    ;;
+-	  irix|nonstopux)
+-	    current=`expr $number_major + $number_minor - 1`
+-	    age="$number_minor"
+-	    revision="$number_minor"
+-	    ;;
+-	  *)
+-	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
+-	    ;;
+-	  esac
+-	  ;;
+-	no)
+-	  current="$1"
+-	  revision="$2"
+-	  age="$3"
+-	  ;;
+-	esac
+-
+-	# Check that each of the things are valid numbers.
+-	case $current in
+-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+-	*)
+-	  func_error "CURRENT \`$current' must be a nonnegative integer"
+-	  func_fatal_error "\`$vinfo' is not valid version information"
+-	  ;;
+-	esac
+-
+-	case $revision in
+-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+-	*)
+-	  func_error "REVISION \`$revision' must be a nonnegative integer"
+-	  func_fatal_error "\`$vinfo' is not valid version information"
+-	  ;;
+-	esac
+-
+-	case $age in
+-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+-	*)
+-	  func_error "AGE \`$age' must be a nonnegative integer"
+-	  func_fatal_error "\`$vinfo' is not valid version information"
++	    $ECHO "*** All declared inter-library dependencies are being dropped."
++	    droppeddeps=yes
++	  fi
+ 	  ;;
+ 	esac
++	versuffix=$versuffix_save
++	major=$major_save
++	release=$release_save
++	libname=$libname_save
++	name=$name_save
+ 
+-	if test "$age" -gt "$current"; then
+-	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+-	  func_fatal_error "\`$vinfo' is not valid version information"
+-	fi
+-
+-	# Calculate the version variables.
+-	major=
+-	versuffix=
+-	verstring=
+-	case $version_type in
+-	none) ;;
+-
+-	darwin)
+-	  # Like Linux, but with the current version available in
+-	  # verstring for coding it into the library header
+-	  major=.`expr $current - $age`
+-	  versuffix="$major.$age.$revision"
+-	  # Darwin ld doesn't like 0 for these options...
+-	  minor_current=`expr $current + 1`
+-	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
++	case $host in
++	*-*-rhapsody* | *-*-darwin1.[012])
++	  # On Rhapsody replace the C library with the System framework
++	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ 	  ;;
++	esac
+ 
+-	freebsd-aout)
+-	  major=".$current"
+-	  versuffix=".$current.$revision";
+-	  ;;
++	if test "$droppeddeps" = yes; then
++	  if test "$module" = yes; then
++	    $ECHO
++	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
++	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
++	    $ECHO "*** a static module, that should work as long as the dlopening"
++	    $ECHO "*** application is linked with the -dlopen flag."
++	    if test -z "$global_symbol_pipe"; then
++	      $ECHO
++	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
++	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
++	      $ECHO "*** not find such a program.  So, this module is probably useless."
++	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
++	    fi
++	    if test "$build_old_libs" = no; then
++	      oldlibs="$output_objdir/$libname.$libext"
++	      build_libtool_libs=module
++	      build_old_libs=yes
++	    else
++	      build_libtool_libs=no
++	    fi
++	  else
++	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
++	    $ECHO "*** automatically added whenever a program is linked with this library"
++	    $ECHO "*** or is declared to -dlopen it."
+ 
+-	freebsd-elf)
+-	  major=".$current"
+-	  versuffix=".$current"
++	    if test "$allow_undefined" = no; then
++	      $ECHO
++	      $ECHO "*** Since this library must not contain undefined symbols,"
++	      $ECHO "*** because either the platform does not support them or"
++	      $ECHO "*** it was explicitly requested with -no-undefined,"
++	      $ECHO "*** libtool will only create a static version of it."
++	      if test "$build_old_libs" = no; then
++		oldlibs="$output_objdir/$libname.$libext"
++		build_libtool_libs=module
++		build_old_libs=yes
++	      else
++		build_libtool_libs=no
++	      fi
++	    fi
++	  fi
++	fi
++	# Done checking deplibs!
++	deplibs=$newdeplibs
++      fi
++      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
++      case $host in
++	*-*-darwin*)
++	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ 	  ;;
++      esac
+ 
+-	irix | nonstopux)
+-	  major=`expr $current - $age + 1`
+-
+-	  case $version_type in
+-	    nonstopux) verstring_prefix=nonstopux ;;
+-	    *)         verstring_prefix=sgi ;;
++      # move library search paths that coincide with paths to not yet
++      # installed libraries to the beginning of the library search list
++      new_libs=
++      for path in $notinst_path; do
++	case " $new_libs " in
++	*" -L$path/$objdir "*) ;;
++	*)
++	  case " $deplibs " in
++	  *" -L$path/$objdir "*)
++	    new_libs="$new_libs -L$path/$objdir" ;;
+ 	  esac
+-	  verstring="$verstring_prefix$major.$revision"
+-
+-	  # Add in all the interfaces that we are compatible with.
+-	  loop=$revision
+-	  while test "$loop" -ne 0; do
+-	    iface=`expr $revision - $loop`
+-	    loop=`expr $loop - 1`
+-	    verstring="$verstring_prefix$major.$iface:$verstring"
+-	  done
+-
+-	  # Before this point, $major must not contain `.'.
+-	  major=.$major
+-	  versuffix="$major.$revision"
+ 	  ;;
+-
+-	linux)
+-	  major=.`expr $current - $age`
+-	  versuffix="$major.$age.$revision"
++	esac
++      done
++      for deplib in $deplibs; do
++	case $deplib in
++	-L*)
++	  case " $new_libs " in
++	  *" $deplib "*) ;;
++	  *) new_libs="$new_libs $deplib" ;;
++	  esac
+ 	  ;;
++	*) new_libs="$new_libs $deplib" ;;
++	esac
++      done
++      deplibs="$new_libs"
+ 
+-	osf)
+-	  major=.`expr $current - $age`
+-	  versuffix=".$current.$age.$revision"
+-	  verstring="$current.$age.$revision"
++      # All the library-specific variables (install_libdir is set above).
++      library_names=
++      old_library=
++      dlname=
+ 
+-	  # Add in all the interfaces that we are compatible with.
+-	  loop=$age
+-	  while test "$loop" -ne 0; do
+-	    iface=`expr $current - $loop`
+-	    loop=`expr $loop - 1`
+-	    verstring="$verstring:${iface}.0"
++      # Test again, we may have decided not to build it any more
++      if test "$build_libtool_libs" = yes; then
++	if test "$hardcode_into_libs" = yes; then
++	  # Hardcode the library paths
++	  hardcode_libdirs=
++	  dep_rpath=
++	  rpath="$finalize_rpath"
++	  test "$mode" != relink && rpath="$compile_rpath$rpath"
++	  for libdir in $rpath; do
++	    if test -n "$hardcode_libdir_flag_spec"; then
++	      if test -n "$hardcode_libdir_separator"; then
++		if test -z "$hardcode_libdirs"; then
++		  hardcode_libdirs="$libdir"
++		else
++		  # Just accumulate the unique libdirs.
++		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++		    ;;
++		  *)
++		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++		    ;;
++		  esac
++		fi
++	      else
++		eval flag=\"$hardcode_libdir_flag_spec\"
++		dep_rpath="$dep_rpath $flag"
++	      fi
++	    elif test -n "$runpath_var"; then
++	      case "$perm_rpath " in
++	      *" $libdir "*) ;;
++	      *) perm_rpath="$perm_rpath $libdir" ;;
++	      esac
++	    fi
+ 	  done
++	  # Substitute the hardcoded libdirs into the rpath.
++	  if test -n "$hardcode_libdir_separator" &&
++	     test -n "$hardcode_libdirs"; then
++	    libdir="$hardcode_libdirs"
++	    if test -n "$hardcode_libdir_flag_spec_ld"; then
++	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
++	    else
++	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
++	    fi
++	  fi
++	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
++	    # We should set the runpath_var.
++	    rpath=
++	    for dir in $perm_rpath; do
++	      rpath="$rpath$dir:"
++	    done
++	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
++	  fi
++	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
++	fi
+ 
+-	  # Make executables depend on our current version.
+-	  verstring="$verstring:${current}.0"
+-	  ;;
++	shlibpath="$finalize_shlibpath"
++	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
++	if test -n "$shlibpath"; then
++	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
++	fi
+ 
+-	qnx)
+-	  major=".$current"
+-	  versuffix=".$current"
+-	  ;;
++	# Get the real and link names of the library.
++	eval shared_ext=\"$shrext_cmds\"
++	eval library_names=\"$library_names_spec\"
++	set dummy $library_names
++	shift
++	realname="$1"
++	shift
+ 
+-	sunos)
+-	  major=".$current"
+-	  versuffix=".$current.$revision"
+-	  ;;
++	if test -n "$soname_spec"; then
++	  eval soname=\"$soname_spec\"
++	else
++	  soname="$realname"
++	fi
++	if test -z "$dlname"; then
++	  dlname=$soname
++	fi
+ 
+-	windows)
+-	  # Use '-' rather than '.', since we only want one
+-	  # extension on DOS 8.3 filesystems.
+-	  major=`expr $current - $age`
+-	  versuffix="-$major"
+-	  ;;
++	lib="$output_objdir/$realname"
++	linknames=
++	for link
++	do
++	  linknames="$linknames $link"
++	done
+ 
+-	*)
+-	  func_fatal_configuration "unknown library version type \`$version_type'"
++	# Use standard objects if they are pic
++	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++
++	delfiles=
++	if test -n "$export_symbols" && test -n "$include_expsyms"; then
++	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
++	  export_symbols="$output_objdir/$libname.uexp"
++	  delfiles="$delfiles $export_symbols"
++	fi
++
++	orig_export_symbols=
++	case $host_os in
++	cygwin* | mingw*)
++	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
++	    # exporting using user supplied symfile
++	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
++	      # and it's NOT already a .def file. Must figure out
++	      # which of the given symbols are data symbols and tag
++	      # them as such. So, trigger use of export_symbols_cmds.
++	      # export_symbols gets reassigned inside the "prepare
++	      # the list of exported symbols" if statement, so the
++	      # include_expsyms logic still works.
++	      orig_export_symbols="$export_symbols"
++	      export_symbols=
++	      always_export_symbols=yes
++	    fi
++	  fi
+ 	  ;;
+ 	esac
+ 
+-	# Clear the version info if we defaulted, and they specified a release.
+-	if test -z "$vinfo" && test -n "$release"; then
+-	  major=
+-	  case $version_type in
+-	  darwin)
+-	    # we can't check for "0.0" in archive_cmds due to quoting
+-	    # problems, so we reset it completely
+-	    verstring=
+-	    ;;
+-	  *)
+-	    verstring="0.0"
+-	    ;;
+-	  esac
+-	  if test "$need_version" = no; then
+-	    versuffix=
+-	  else
+-	    versuffix=".0.0"
++	# Prepare the list of exported symbols
++	if test -z "$export_symbols"; then
++	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
++	    func_echo "generating symbol list for \`$libname.la'"
++	    export_symbols="$output_objdir/$libname.exp"
++	    $opt_dry_run || $RM $export_symbols
++	    cmds=$export_symbols_cmds
++	    save_ifs="$IFS"; IFS='~'
++	    for cmd in $cmds; do
++	      IFS="$save_ifs"
++	      eval cmd=\"$cmd\"
++	      if len=`expr "X$cmd" : ".*"` &&
++	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++		func_show_eval "$cmd" 'exit $?'
++		skipped_export=false
++	      else
++		# The command line is too long to execute in one step.
++		func_echo "using reloadable object file for export list..."
++		skipped_export=:
++		# Break out early, otherwise skipped_export may be
++		# set to false by a later but shorter cmd.
++		break
++	      fi
++	    done
++	    IFS="$save_ifs"
++	    if test -n "$export_symbols_regex"; then
++	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
++	    fi
+ 	  fi
+ 	fi
+ 
+-	# Remove version info from name if versioning should be avoided
+-	if test "$avoid_version" = yes && test "$need_version" = no; then
+-	  major=
+-	  versuffix=
+-	  verstring=""
++	if test -n "$export_symbols" && test -n "$include_expsyms"; then
++	  tmp_export_symbols="$export_symbols"
++	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
++	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+ 	fi
+ 
+-	# Check to see if the archive will have undefined symbols.
+-	if test "$allow_undefined" = yes; then
+-	  if test "$allow_undefined_flag" = unsupported; then
+-	    func_warning "undefined symbols not allowed in $host shared libraries"
+-	    build_libtool_libs=no
+-	    build_old_libs=yes
+-	  fi
+-	else
+-	  # Don't allow undefined symbols.
+-	  allow_undefined_flag="$no_undefined_flag"
++	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
++	  # The given exports_symbols file has to be filtered, so filter it.
++	  func_echo "filter symbol list for \`$libname.la' to tag DATA exports"
++	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
++	  # 's' commands which not all seds can handle. GNU sed should be fine
++	  # though. Also, the filter scales superlinearly with the number of
++	  # global variables. join(1) would be nice here, but unfortunately
++	  # isn't a blessed tool.
++	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
++	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
++	  export_symbols=$output_objdir/$libname.def
++	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ 	fi
+ 
+-      fi
+-
+-      func_generate_dlsyms "$libname" "$libname" "yes"
+-      libobjs="$libobjs $symfileobj"
+-      test "X$libobjs" = "X " && libobjs=
+-
+-      if test "$mode" != relink; then
+-	# Remove our outputs, but don't remove object files since they
+-	# may have been created when compiling PIC objects.
+-	removelist=
+-	tempremovelist=`$ECHO "$output_objdir/*"`
+-	for p in $tempremovelist; do
+-	  case $p in
+-	    *.$objext)
+-	       ;;
+-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+-	       if test "X$precious_files_regex" != "X"; then
+-		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+-		 then
+-		   continue
+-		 fi
+-	       fi
+-	       removelist="$removelist $p"
+-	       ;;
+-	    *) ;;
++	tmp_deplibs=
++	for test_deplib in $deplibs; do
++	  case " $convenience " in
++	  *" $test_deplib "*) ;;
++	  *)
++	    tmp_deplibs="$tmp_deplibs $test_deplib"
++	    ;;
+ 	  esac
+ 	done
+-	test -n "$removelist" && \
+-	  func_show_eval "${RM}r \$removelist"
+-      fi
++	deplibs="$tmp_deplibs"
+ 
+-      # Now set the variables for building old libraries.
+-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
++	if test -n "$convenience"; then
++	  if test -n "$whole_archive_flag_spec"; then
++	    save_libobjs=$libobjs
++	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++	  else
++	    gentop="$output_objdir/${outputname}x"
++	    generated="$generated $gentop"
+ 
+-	# Transform .lo files to .o files.
+-	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+-      fi
++	    func_extract_archives $gentop $convenience
++	    libobjs="$libobjs $func_extract_archives_result"
++	  fi
++	fi
+ 
+-      # Eliminate all temporary directories.
+-      #for path in $notinst_path; do
+-      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+-      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+-      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+-      #done
++	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
++	  eval flag=\"$thread_safe_flag_spec\"
++	  linker_flags="$linker_flags $flag"
++	fi
+ 
+-      if test -n "$xrpath"; then
+-	# If the user specified any rpath flags, then add them.
+-	temp_xrpath=
+-	for libdir in $xrpath; do
+-	  temp_xrpath="$temp_xrpath -R$libdir"
+-	  case "$finalize_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+-	  esac
+-	done
+-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+-	  dependency_libs="$temp_xrpath $dependency_libs"
++	# Make a backup of the uninstalled library when relinking
++	if test "$mode" = relink; then
++	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ 	fi
+-      fi
+ 
+-      # Make sure dlfiles contains only unique files that won't be dlpreopened
+-      old_dlfiles="$dlfiles"
+-      dlfiles=
+-      for lib in $old_dlfiles; do
+-	case " $dlprefiles $dlfiles " in
+-	*" $lib "*) ;;
+-	*) dlfiles="$dlfiles $lib" ;;
+-	esac
+-      done
++	# Do each of the archive commands.
++	if test "$module" = yes && test -n "$module_cmds" ; then
++	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++	    eval test_cmds=\"$module_expsym_cmds\"
++	    cmds=$module_expsym_cmds
++	  else
++	    eval test_cmds=\"$module_cmds\"
++	    cmds=$module_cmds
++	  fi
++	else
++	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++	    eval test_cmds=\"$archive_expsym_cmds\"
++	    cmds=$archive_expsym_cmds
++	  else
++	    eval test_cmds=\"$archive_cmds\"
++	    cmds=$archive_cmds
++	  fi
++	fi
+ 
+-      # Make sure dlprefiles contains only unique files
+-      old_dlprefiles="$dlprefiles"
+-      dlprefiles=
+-      for lib in $old_dlprefiles; do
+-	case "$dlprefiles " in
+-	*" $lib "*) ;;
+-	*) dlprefiles="$dlprefiles $lib" ;;
+-	esac
+-      done
++	if test "X$skipped_export" != "X:" &&
++	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
++	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++	  :
++	else
++	  # The command line is too long to link in one step, link piecewise
++	  # or, if using GNU ld and skipped_export is not :, use a linker
++	  # script.
+ 
+-      if test "$build_libtool_libs" = yes; then
+-	if test -n "$rpath"; then
+-	  case $host in
+-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+-	    # these systems don't actually have a c library (as such)!
+-	    ;;
+-	  *-*-rhapsody* | *-*-darwin1.[012])
+-	    # Rhapsody C library is in the System framework
+-	    deplibs="$deplibs System.ltframework"
+-	    ;;
+-	  *-*-netbsd*)
+-	    # Don't link with libc until the a.out ld.so is fixed.
+-	    ;;
+-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+-	    # Do not include libc due to us having libc/libc_r.
+-	    ;;
+-	  *-*-sco3.2v5* | *-*-sco5v6*)
+-	    # Causes problems with __ctype
+-	    ;;
+-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+-	    # Compiler inserts libc in the correct place for threads to work
+- 	    ;;
+- 	  *)
+-	    # Add libc to deplibs on all other systems if necessary.
+-	    if test "$build_libtool_need_lc" = "yes"; then
+-	      deplibs="$deplibs -lc"
+-	    fi
+-	    ;;
+-	  esac
+-	fi
++	  # Save the value of $output and $libobjs because we want to
++	  # use them later.  If we have whole_archive_flag_spec, we
++	  # want to use save_libobjs as it was before
++	  # whole_archive_flag_spec was expanded, because we can't
++	  # assume the linker understands whole_archive_flag_spec.
++	  # This may have to be revisited, in case too many
++	  # convenience libraries get linked in and end up exceeding
++	  # the spec.
++	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
++	    save_libobjs=$libobjs
++	  fi
++	  save_output=$output
++	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
++
++	  # Clear the reloadable object creation command queue and
++	  # initialize k to one.
++	  test_cmds=
++	  concat_cmds=
++	  objlist=
++	  last_robj=
++	  k=1
+ 
+-	# Transform deplibs into only deplibs that can be linked in shared.
+-	name_save=$name
+-	libname_save=$libname
+-	release_save=$release
+-	versuffix_save=$versuffix
+-	major_save=$major
+-	# I'm not sure if I'm treating the release correctly.  I think
+-	# release should show up in the -l (ie -lgmp5) so we don't want to
+-	# add it in twice.  Is that correct?
+-	release=""
+-	versuffix=""
+-	major=""
+-	newdeplibs=
+-	droppeddeps=no
+-	case $deplibs_check_method in
+-	pass_all)
+-	  # Don't check for shared/static.  Everything works.
+-	  # This might be a little naive.  We might want to check
+-	  # whether the library exists or not.  But this is on
+-	  # osf3 & osf4 and I'm not really sure... Just
+-	  # implementing what was already the behavior.
+-	  newdeplibs=$deplibs
+-	  ;;
+-	test_compile)
+-	  # This code stresses the "libraries are programs" paradigm to its
+-	  # limits. Maybe even breaks it.  We compile a program, linking it
+-	  # against the deplibs as a proxy for the library.  Then we can check
+-	  # whether they linked in statically or dynamically with ldd.
+-	  $opt_dry_run || $RM conftest.c
+-	  cat > conftest.c <<EOF
+-	  int main() { return 0; }
+-EOF
+-	  $opt_dry_run || $RM conftest
+-	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+-	    ldd_output=`ldd conftest`
+-	    for i in $deplibs; do
+-	      name=`expr $i : '-l\(.*\)'`
+-	      # If $name is empty we are operating on a -L argument.
+-	      if test "$name" != "" && test "$name" != "0"; then
+-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-		  case " $predeps $postdeps " in
+-		  *" $i "*)
+-		    newdeplibs="$newdeplibs $i"
+-		    i=""
+-		    ;;
+-		  esac
+-		fi
+-		if test -n "$i" ; then
+-		  libname=`eval "\\$ECHO \"$libname_spec\""`
+-		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+-		  set dummy $deplib_matches; shift
+-		  deplib_match=$1
+-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+-		    newdeplibs="$newdeplibs $i"
+-		  else
+-		    droppeddeps=yes
+-		    $ECHO
+-		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+-		    $ECHO "*** I have the capability to make that library automatically link in when"
+-		    $ECHO "*** you link to this library.  But I can only do this if you have a"
+-		    $ECHO "*** shared version of the library, which I believe you do not have"
+-		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+-		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
+-		  fi
+-		fi
+-	      else
+-		newdeplibs="$newdeplibs $i"
+-	      fi
++	  if test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
++	    output=${output_objdir}/${output_la}.lnkscript
++	    func_echo "creating GNU ld script: $output"
++	    $ECHO 'INPUT (' > $output
++	    for obj in $save_libobjs
++	    do
++	      $ECHO \""$obj"\" >> $output
++	    done
++	    $ECHO ')' >> $output
++	    delfiles="$delfiles $output"
++	  elif test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
++	    output=${output_objdir}/${output_la}.lnk
++	    func_echo "creating linker input file list: $output"
++	    : > $output
++	    for obj in $save_libobjs
++	    do
++	      $ECHO "$obj" >> $output
+ 	    done
++	    delfiles="$delfiles $output"
++	    output=\"$file_list_spec$output\"
+ 	  else
+-	    # Error occurred in the first compile.  Let's try to salvage
+-	    # the situation: Compile a separate program for each library.
+-	    for i in $deplibs; do
+-	      name=`expr $i : '-l\(.*\)'`
+-	      # If $name is empty we are operating on a -L argument.
+-	      if test "$name" != "" && test "$name" != "0"; then
+-		$opt_dry_run || $RM conftest
+-		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+-		  ldd_output=`ldd conftest`
+-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-		    case " $predeps $postdeps " in
+-		    *" $i "*)
+-		      newdeplibs="$newdeplibs $i"
+-		      i=""
+-		      ;;
+-		    esac
+-		  fi
+-		  if test -n "$i" ; then
+-		    libname=`eval "\\$ECHO \"$libname_spec\""`
+-		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+-		    set dummy $deplib_matches; shift
+-		    deplib_match=$1
+-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+-		      newdeplibs="$newdeplibs $i"
+-		    else
+-		      droppeddeps=yes
+-		      $ECHO
+-		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+-		      $ECHO "*** I have the capability to make that library automatically link in when"
+-		      $ECHO "*** you link to this library.  But I can only do this if you have a"
+-		      $ECHO "*** shared version of the library, which you do not appear to have"
+-		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+-		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
+-		    fi
+-		  fi
+-		else
+-		  droppeddeps=yes
+-		  $ECHO
+-		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+-		  $ECHO "*** make it link in!  You will probably need to install it or some"
+-		  $ECHO "*** library that it depends on before this library will be fully"
+-		  $ECHO "*** functional.  Installing it before continuing would be even better."
+-		fi
++	    func_echo "creating reloadable object files..."
++	    output=$output_objdir/$output_la-${k}.$objext
++	    # Loop over the list of objects to be linked.
++	    for obj in $save_libobjs
++	    do
++	      eval test_cmds=\"$reload_cmds $objlist $last_robj\"
++	      if test "X$objlist" = X ||
++		 { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
++		   test "$len" -le "$max_cmd_len"; }; then
++		objlist="$objlist $obj"
+ 	      else
+-		newdeplibs="$newdeplibs $i"
+-	      fi
+-	    done
+-	  fi
+-	  ;;
+-	file_magic*)
+-	  set dummy $deplibs_check_method; shift
+-	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+-	  for a_deplib in $deplibs; do
+-	    name=`expr $a_deplib : '-l\(.*\)'`
+-	    # If $name is empty we are operating on a -L argument.
+-	    if test "$name" != "" && test  "$name" != "0"; then
+-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-		case " $predeps $postdeps " in
+-		*" $a_deplib "*)
+-		  newdeplibs="$newdeplibs $a_deplib"
+-		  a_deplib=""
+-		  ;;
+-		esac
+-	      fi
+-	      if test -n "$a_deplib" ; then
+-		libname=`eval "\\$ECHO \"$libname_spec\""`
+-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+-		  for potent_lib in $potential_libs; do
+-		      # Follow soft links.
+-		      if ls -lLd "$potent_lib" 2>/dev/null |
+-			 $GREP " -> " >/dev/null; then
+-			continue
+-		      fi
+-		      # The statement above tries to avoid entering an
+-		      # endless loop below, in case of cyclic links.
+-		      # We might still enter an endless loop, since a link
+-		      # loop can be closed while we follow links,
+-		      # but so what?
+-		      potlib="$potent_lib"
+-		      while test -h "$potlib" 2>/dev/null; do
+-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+-			case $potliblink in
+-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+-			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+-			esac
+-		      done
+-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+-			 $SED -e 10q |
+-			 $EGREP "$file_magic_regex" > /dev/null; then
+-			newdeplibs="$newdeplibs $a_deplib"
+-			a_deplib=""
+-			break 2
+-		      fi
+-		  done
+-		done
+-	      fi
+-	      if test -n "$a_deplib" ; then
+-		droppeddeps=yes
+-		$ECHO
+-		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+-		$ECHO "*** I have the capability to make that library automatically link in when"
+-		$ECHO "*** you link to this library.  But I can only do this if you have a"
+-		$ECHO "*** shared version of the library, which you do not appear to have"
+-		$ECHO "*** because I did check the linker path looking for a file starting"
+-		if test -z "$potlib" ; then
+-		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
++		# The command $test_cmds is almost too long, add a
++		# command to the queue.
++		if test "$k" -eq 1 ; then
++		  # The first file doesn't have a previous command to add.
++		  eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+ 		else
+-		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+-		  $ECHO "*** using a file magic. Last file checked: $potlib"
++		  # All subsequent reloadable object files will link in
++		  # the last one created.
++		  eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+ 		fi
++		last_robj=$output_objdir/$output_la-${k}.$objext
++		k=`expr $k + 1`
++		output=$output_objdir/$output_la-${k}.$objext
++		objlist=$obj
++		len=1
+ 	      fi
+-	    else
+-	      # Add a -L argument.
+-	      newdeplibs="$newdeplibs $a_deplib"
++	    done
++	    # Handle the remaining objects by creating one last
++	    # reloadable object file.  All subsequent reloadable object
++	    # files will link in the last one created.
++	    test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++	    eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
++
++	    if ${skipped_export-false}; then
++	      func_echo "generating symbol list for \`$libname.la'"
++	      export_symbols="$output_objdir/$libname.exp"
++	      $opt_dry_run || $RM $export_symbols
++	      libobjs=$output
++	      # Append the command to create the export file.
++	      eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+ 	    fi
+-	  done # Gone through all deplibs.
+-	  ;;
+-	match_pattern*)
+-	  set dummy $deplibs_check_method; shift
+-	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+-	  for a_deplib in $deplibs; do
+-	    name=`expr $a_deplib : '-l\(.*\)'`
+-	    # If $name is empty we are operating on a -L argument.
+-	    if test -n "$name" && test "$name" != "0"; then
+-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-		case " $predeps $postdeps " in
+-		*" $a_deplib "*)
+-		  newdeplibs="$newdeplibs $a_deplib"
+-		  a_deplib=""
+-		  ;;
+-		esac
+-	      fi
+-	      if test -n "$a_deplib" ; then
+-		libname=`eval "\\$ECHO \"$libname_spec\""`
+-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+-		  for potent_lib in $potential_libs; do
+-		    potlib="$potent_lib" # see symlink-check above in file_magic test
+-		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+-		       $EGREP "$match_pattern_regex" > /dev/null; then
+-		      newdeplibs="$newdeplibs $a_deplib"
+-		      a_deplib=""
+-		      break 2
+-		    fi
+-		  done
+-		done
+-	      fi
+-	      if test -n "$a_deplib" ; then
+-		droppeddeps=yes
+-		$ECHO
+-		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+-		$ECHO "*** I have the capability to make that library automatically link in when"
+-		$ECHO "*** you link to this library.  But I can only do this if you have a"
+-		$ECHO "*** shared version of the library, which you do not appear to have"
+-		$ECHO "*** because I did check the linker path looking for a file starting"
+-		if test -z "$potlib" ; then
+-		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+-		else
+-		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+-		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
++
++	    # Set up a command to remove the reloadable object files
++	    # after they are used.
++	    i=0
++	    while test "$i" -lt "$k"
++	    do
++	      i=`expr $i + 1`
++	      delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
++	    done
++
++	    func_echo "creating a temporary reloadable object file: $output"
++
++	    # Loop through the commands generated above and execute them.
++	    save_ifs="$IFS"; IFS='~'
++	    for cmd in $concat_cmds; do
++	      IFS="$save_ifs"
++	      $opt_silent || {
++	          func_quote_for_expand "$cmd"
++		  eval "func_echo $func_quote_for_expand_result"
++	      }
++	      $opt_dry_run || eval "$cmd" || {
++		lt_exit=$?
++
++		# Restore the uninstalled library and exit
++		if test "$mode" = relink; then
++		  ( cd "$output_objdir" && \
++		    $RM "${realname}T" && \
++		    $MV "${realname}U" "$realname" )
+ 		fi
+-	      fi
+-	    else
+-	      # Add a -L argument.
+-	      newdeplibs="$newdeplibs $a_deplib"
+-	    fi
+-	  done # Gone through all deplibs.
+-	  ;;
+-	none | unknown | *)
+-	  newdeplibs=""
+-	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+-	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
+-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-	    for i in $predeps $postdeps ; do
+-	      # can't use Xsed below, because $i might contain '/'
+-	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
++
++		exit $lt_exit
++	      }
+ 	    done
++	    IFS="$save_ifs"
+ 	  fi
+-	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' |
+-	     $GREP . >/dev/null; then
+-	    $ECHO
+-	    if test "X$deplibs_check_method" = "Xnone"; then
+-	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
++
++	  libobjs=$output
++	  # Restore the value of output.
++	  output=$save_output
++
++	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
++	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++	  fi
++	  # Expand the library linking commands again to reset the
++	  # value of $libobjs for piecewise linking.
++
++	  # Do each of the archive commands.
++	  if test "$module" = yes && test -n "$module_cmds" ; then
++	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++	      cmds=$module_expsym_cmds
+ 	    else
+-	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
++	      cmds=$module_cmds
++	    fi
++	  else
++	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++	      cmds=$archive_expsym_cmds
++	    else
++	      cmds=$archive_cmds
+ 	    fi
+-	    $ECHO "*** All declared inter-library dependencies are being dropped."
+-	    droppeddeps=yes
+ 	  fi
+-	  ;;
+-	esac
+-	versuffix=$versuffix_save
+-	major=$major_save
+-	release=$release_save
+-	libname=$libname_save
+-	name=$name_save
++	fi
+ 
+-	case $host in
+-	*-*-rhapsody* | *-*-darwin1.[012])
+-	  # On Rhapsody replace the C library with the System framework
+-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+-	  ;;
+-	esac
++	if test -n "$delfiles"; then
++	  # Append the command to remove temporary files to $cmds.
++	  eval cmds=\"\$cmds~\$RM $delfiles\"
++	fi
+ 
+-	if test "$droppeddeps" = yes; then
+-	  if test "$module" = yes; then
+-	    $ECHO
+-	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+-	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+-	    $ECHO "*** a static module, that should work as long as the dlopening"
+-	    $ECHO "*** application is linked with the -dlopen flag."
+-	    if test -z "$global_symbol_pipe"; then
+-	      $ECHO
+-	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
+-	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+-	      $ECHO "*** not find such a program.  So, this module is probably useless."
+-	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+-	    fi
+-	    if test "$build_old_libs" = no; then
+-	      oldlibs="$output_objdir/$libname.$libext"
+-	      build_libtool_libs=module
+-	      build_old_libs=yes
+-	    else
+-	      build_libtool_libs=no
++	# Add any objects from preloaded convenience libraries
++	if test -n "$dlprefiles"; then
++	  gentop="$output_objdir/${outputname}x"
++	  generated="$generated $gentop"
++
++	  func_extract_archives $gentop $dlprefiles
++	  libobjs="$libobjs $func_extract_archives_result"
++	fi
++
++	save_ifs="$IFS"; IFS='~'
++	for cmd in $cmds; do
++	  IFS="$save_ifs"
++	  eval cmd=\"$cmd\"
++	  $opt_silent || {
++	    func_quote_for_expand "$cmd"
++	    eval "func_echo $func_quote_for_expand_result"
++	  }
++	  $opt_dry_run || eval "$cmd" || {
++	    lt_exit=$?
++
++	    # Restore the uninstalled library and exit
++	    if test "$mode" = relink; then
++	      ( cd "$output_objdir" && \
++	        $RM "${realname}T" && \
++		$MV "${realname}U" "$realname" )
+ 	    fi
+-	  else
+-	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
+-	    $ECHO "*** automatically added whenever a program is linked with this library"
+-	    $ECHO "*** or is declared to -dlopen it."
+ 
+-	    if test "$allow_undefined" = no; then
+-	      $ECHO
+-	      $ECHO "*** Since this library must not contain undefined symbols,"
+-	      $ECHO "*** because either the platform does not support them or"
+-	      $ECHO "*** it was explicitly requested with -no-undefined,"
+-	      $ECHO "*** libtool will only create a static version of it."
+-	      if test "$build_old_libs" = no; then
+-		oldlibs="$output_objdir/$libname.$libext"
+-		build_libtool_libs=module
+-		build_old_libs=yes
+-	      else
+-		build_libtool_libs=no
+-	      fi
++	    exit $lt_exit
++	  }
++	done
++	IFS="$save_ifs"
++
++	# Restore the uninstalled library and exit
++	if test "$mode" = relink; then
++	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
++
++	  if test -n "$convenience"; then
++	    if test -z "$whole_archive_flag_spec"; then
++	      func_show_eval '${RM}r "$gentop"'
+ 	    fi
+ 	  fi
++
++	  exit $EXIT_SUCCESS
+ 	fi
+-	# Done checking deplibs!
+-	deplibs=$newdeplibs
++
++	# Create links to the real library.
++	for linkname in $linknames; do
++	  if test "$realname" != "$linkname"; then
++	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
++	  fi
++	done
++
++	# If -module or -export-dynamic was specified, set the dlname.
++	if test "$module" = yes || test "$export_dynamic" = yes; then
++	  # On all known operating systems, these are identical.
++	  dlname="$soname"
++	fi
++      fi
++      ;;
++
++    obj)
++      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++	func_warning "\`-dlopen' is ignored for objects"
++      fi
++
++      test -n "$deplibs" && \
++	func_warning "\`-l' and \`-L' are ignored for objects"
++
++      test -n "$rpath" && \
++	func_warning "\`-rpath' is ignored for objects"
++
++      test -n "$xrpath" && \
++	func_warning "\`-R' is ignored for objects"
++
++      test -n "$vinfo" && \
++	func_warning "\`-version-info' is ignored for objects"
++
++      test -n "$release" && \
++	func_warning "\`-release' is ignored for objects"
++
++      case $output in
++      *.lo)
++	test -n "$objs$old_deplibs" && \
++	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
++
++	libobj="$output"
++	obj=`$ECHO "X$output" | $Xsed -e "$lo2o"`
++	;;
++      *)
++	libobj=
++	obj="$output"
++	;;
++      esac
++
++      # Delete the old objects.
++      $opt_dry_run || $RM $obj $libobj
++
++      # Objects from convenience libraries.  This assumes
++      # single-version convenience libraries.  Whenever we create
++      # different ones for PIC/non-PIC, this we'll have to duplicate
++      # the extraction.
++      reload_conv_objs=
++      gentop=
++      # reload_cmds runs $LD directly, so let us get rid of
++      # -Wl from whole_archive_flag_spec
++      wl=
++
++      if test -n "$convenience"; then
++	if test -n "$whole_archive_flag_spec"; then
++	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
++	else
++	  gentop="$output_objdir/${obj}x"
++	  generated="$generated $gentop"
++
++	  func_extract_archives $gentop $convenience
++	  reload_conv_objs="$reload_objs $func_extract_archives_result"
++	fi
++      fi
++
++      # Create the old-style object.
++      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
++
++      output="$obj"
++      func_execute_cmds "$reload_cmds" 'exit $?'
++
++      # Exit if we aren't doing a library object file.
++      if test -z "$libobj"; then
++	if test -n "$gentop"; then
++	  func_show_eval '${RM}r "$gentop"'
++	fi
++
++	exit $EXIT_SUCCESS
++      fi
++
++      if test "$build_libtool_libs" != yes; then
++	if test -n "$gentop"; then
++	  func_show_eval '${RM}r "$gentop"'
++	fi
++
++	# Create an invalid libtool object if no PIC, so that we don't
++	# accidentally link it into a program.
++	# $show "echo timestamp > $libobj"
++	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
++	exit $EXIT_SUCCESS
+       fi
+-      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
++
++      if test -n "$pic_flag" || test "$pic_mode" != default; then
++	# Only do commands if we really have different PIC objects.
++	reload_objs="$libobjs $reload_conv_objs"
++	output="$libobj"
++	func_execute_cmds "$reload_cmds" 'exit $?'
++      fi
++
++      if test -n "$gentop"; then
++	func_show_eval '${RM}r "$gentop"'
++      fi
++
++      exit $EXIT_SUCCESS
++      ;;
++
++    prog)
+       case $host in
+-	*-*-darwin*)
+-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+-	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+-	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+-	  ;;
++	*cygwin*) func_stripname '' '.exe' "$output"
++	          output=$func_stripname_result.exe;;
++      esac
++      test -n "$vinfo" && \
++	func_warning "\`-version-info' is ignored for programs"
++
++      test -n "$release" && \
++	func_warning "\`-release' is ignored for programs"
++
++      test "$preload" = yes \
++        && test "$dlopen_support" = unknown \
++	&& test "$dlopen_self" = unknown \
++	&& test "$dlopen_self_static" = unknown && \
++	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
++
++      case $host in
++      *-*-rhapsody* | *-*-darwin1.[012])
++	# On Rhapsody replace the C library is the System framework
++	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
++	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
++	;;
++      esac
++
++      case $host in
++      *-*-darwin*)
++	# Don't allow lazy linking, it breaks C++ global constructors
++	# But is supposedly fixed on 10.4 or later (yay!).
++	if test "$tagname" = CXX ; then
++	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
++	    10.[0123])
++	      compile_command="$compile_command ${wl}-bind_at_load"
++	      finalize_command="$finalize_command ${wl}-bind_at_load"
++	    ;;
++	  esac
++	fi
++	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
++	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++	;;
+       esac
+ 
++
+       # move library search paths that coincide with paths to not yet
+       # installed libraries to the beginning of the library search list
+       new_libs=
+@@ -5919,14 +5960,14 @@ EOF
+ 	case " $new_libs " in
+ 	*" -L$path/$objdir "*) ;;
+ 	*)
+-	  case " $deplibs " in
++	  case " $compile_deplibs " in
+ 	  *" -L$path/$objdir "*)
+ 	    new_libs="$new_libs -L$path/$objdir" ;;
+ 	  esac
+ 	  ;;
+ 	esac
+       done
+-      for deplib in $deplibs; do
++      for deplib in $compile_deplibs; do
+ 	case $deplib in
+ 	-L*)
+ 	  case " $new_libs " in
+@@ -5937,964 +5978,803 @@ EOF
+ 	*) new_libs="$new_libs $deplib" ;;
+ 	esac
+       done
+-      deplibs="$new_libs"
+-
+-      # All the library-specific variables (install_libdir is set above).
+-      library_names=
+-      old_library=
+-      dlname=
+-
+-      # Test again, we may have decided not to build it any more
+-      if test "$build_libtool_libs" = yes; then
+-	if test "$hardcode_into_libs" = yes; then
+-	  # Hardcode the library paths
+-	  hardcode_libdirs=
+-	  dep_rpath=
+-	  rpath="$finalize_rpath"
+-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+-	  for libdir in $rpath; do
+-	    if test -n "$hardcode_libdir_flag_spec"; then
+-	      if test -n "$hardcode_libdir_separator"; then
+-		if test -z "$hardcode_libdirs"; then
+-		  hardcode_libdirs="$libdir"
+-		else
+-		  # Just accumulate the unique libdirs.
+-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+-		    ;;
+-		  *)
+-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+-		    ;;
+-		  esac
+-		fi
+-	      else
+-		eval flag=\"$hardcode_libdir_flag_spec\"
+-		dep_rpath="$dep_rpath $flag"
+-	      fi
+-	    elif test -n "$runpath_var"; then
+-	      case "$perm_rpath " in
+-	      *" $libdir "*) ;;
+-	      *) perm_rpath="$perm_rpath $libdir" ;;
+-	      esac
+-	    fi
+-	  done
+-	  # Substitute the hardcoded libdirs into the rpath.
+-	  if test -n "$hardcode_libdir_separator" &&
+-	     test -n "$hardcode_libdirs"; then
+-	    libdir="$hardcode_libdirs"
+-	    if test -n "$hardcode_libdir_flag_spec_ld"; then
+-	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+-	    else
+-	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+-	    fi
+-	  fi
+-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+-	    # We should set the runpath_var.
+-	    rpath=
+-	    for dir in $perm_rpath; do
+-	      rpath="$rpath$dir:"
+-	    done
+-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+-	  fi
+-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+-	fi
+-
+-	shlibpath="$finalize_shlibpath"
+-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+-	if test -n "$shlibpath"; then
+-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+-	fi
++      compile_deplibs="$new_libs"
+ 
+-	# Get the real and link names of the library.
+-	eval shared_ext=\"$shrext_cmds\"
+-	eval library_names=\"$library_names_spec\"
+-	set dummy $library_names
+-	shift
+-	realname="$1"
+-	shift
+ 
+-	if test -n "$soname_spec"; then
+-	  eval soname=\"$soname_spec\"
+-	else
+-	  soname="$realname"
+-	fi
+-	if test -z "$dlname"; then
+-	  dlname=$soname
+-	fi
++      compile_command="$compile_command $compile_deplibs"
++      finalize_command="$finalize_command $finalize_deplibs"
+ 
+-	lib="$output_objdir/$realname"
+-	linknames=
+-	for link
+-	do
+-	  linknames="$linknames $link"
++      if test -n "$rpath$xrpath"; then
++	# If the user specified any rpath flags, then add them.
++	for libdir in $rpath $xrpath; do
++	  # This is the magic to use -rpath.
++	  case "$finalize_rpath " in
++	  *" $libdir "*) ;;
++	  *) finalize_rpath="$finalize_rpath $libdir" ;;
++	  esac
+ 	done
++      fi
+ 
+-	# Use standard objects if they are pic
+-	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-	test "X$libobjs" = "X " && libobjs=
+-
+-	delfiles=
+-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+-	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+-	  export_symbols="$output_objdir/$libname.uexp"
+-	  delfiles="$delfiles $export_symbols"
+-	fi
+-
+-	orig_export_symbols=
+-	case $host_os in
+-	cygwin* | mingw*)
+-	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+-	    # exporting using user supplied symfile
+-	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+-	      # and it's NOT already a .def file. Must figure out
+-	      # which of the given symbols are data symbols and tag
+-	      # them as such. So, trigger use of export_symbols_cmds.
+-	      # export_symbols gets reassigned inside the "prepare
+-	      # the list of exported symbols" if statement, so the
+-	      # include_expsyms logic still works.
+-	      orig_export_symbols="$export_symbols"
+-	      export_symbols=
+-	      always_export_symbols=yes
++      # Now hardcode the library paths
++      rpath=
++      hardcode_libdirs=
++      for libdir in $compile_rpath $finalize_rpath; do
++	if test -n "$hardcode_libdir_flag_spec"; then
++	  if test -n "$hardcode_libdir_separator"; then
++	    if test -z "$hardcode_libdirs"; then
++	      hardcode_libdirs="$libdir"
++	    else
++	      # Just accumulate the unique libdirs.
++	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++		;;
++	      *)
++		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++		;;
++	      esac
+ 	    fi
++	  else
++	    eval flag=\"$hardcode_libdir_flag_spec\"
++	    rpath="$rpath $flag"
+ 	  fi
++	elif test -n "$runpath_var"; then
++	  case "$perm_rpath " in
++	  *" $libdir "*) ;;
++	  *) perm_rpath="$perm_rpath $libdir" ;;
++	  esac
++	fi
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
++	  case :$dllsearchpath: in
++	  *":$libdir:"*) ;;
++	  *) dllsearchpath="$dllsearchpath:$libdir";;
++	  esac
++	  case :$dllsearchpath: in
++	  *":$testbindir:"*) ;;
++	  *) dllsearchpath="$dllsearchpath:$testbindir";;
++	  esac
+ 	  ;;
+-	esac
+-
+-	# Prepare the list of exported symbols
+-	if test -z "$export_symbols"; then
+-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+-	    func_echo "generating symbol list for \`$libname.la'"
+-	    export_symbols="$output_objdir/$libname.exp"
+-	    $opt_dry_run || $RM $export_symbols
+-	    cmds=$export_symbols_cmds
+-	    save_ifs="$IFS"; IFS='~'
+-	    for cmd in $cmds; do
+-	      IFS="$save_ifs"
+-	      eval cmd=\"$cmd\"
+-	      if len=`expr "X$cmd" : ".*"` &&
+-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+-		func_show_eval "$cmd" 'exit $?'
+-		skipped_export=false
+-	      else
+-		# The command line is too long to execute in one step.
+-		func_echo "using reloadable object file for export list..."
+-		skipped_export=:
+-		# Break out early, otherwise skipped_export may be
+-		# set to false by a later but shorter cmd.
+-		break
+-	      fi
+-	    done
+-	    IFS="$save_ifs"
+-	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+-	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+-	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
++	esac
++      done
++      # Substitute the hardcoded libdirs into the rpath.
++      if test -n "$hardcode_libdir_separator" &&
++	 test -n "$hardcode_libdirs"; then
++	libdir="$hardcode_libdirs"
++	eval rpath=\" $hardcode_libdir_flag_spec\"
++      fi
++      compile_rpath="$rpath"
++
++      rpath=
++      hardcode_libdirs=
++      for libdir in $finalize_rpath; do
++	if test -n "$hardcode_libdir_flag_spec"; then
++	  if test -n "$hardcode_libdir_separator"; then
++	    if test -z "$hardcode_libdirs"; then
++	      hardcode_libdirs="$libdir"
++	    else
++	      # Just accumulate the unique libdirs.
++	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++		;;
++	      *)
++		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++		;;
++	      esac
+ 	    fi
++	  else
++	    eval flag=\"$hardcode_libdir_flag_spec\"
++	    rpath="$rpath $flag"
+ 	  fi
++	elif test -n "$runpath_var"; then
++	  case "$finalize_perm_rpath " in
++	  *" $libdir "*) ;;
++	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
++	  esac
+ 	fi
++      done
++      # Substitute the hardcoded libdirs into the rpath.
++      if test -n "$hardcode_libdir_separator" &&
++	 test -n "$hardcode_libdirs"; then
++	libdir="$hardcode_libdirs"
++	eval rpath=\" $hardcode_libdir_flag_spec\"
++      fi
++      finalize_rpath="$rpath"
+ 
+-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+-	  tmp_export_symbols="$export_symbols"
+-	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+-	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+-	fi
++      if test -n "$libobjs" && test "$build_old_libs" = yes; then
++	# Transform all the library objects into standard objects.
++	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++      fi
+ 
+-	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+-	  # The given exports_symbols file has to be filtered, so filter it.
+-	  func_echo "filter symbol list for \`$libname.la' to tag DATA exports"
+-	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+-	  # 's' commands which not all seds can handle. GNU sed should be fine
+-	  # though. Also, the filter scales superlinearly with the number of
+-	  # global variables. join(1) would be nice here, but unfortunately
+-	  # isn't a blessed tool.
+-	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+-	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+-	  export_symbols=$output_objdir/$libname.def
+-	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+-	fi
++      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+ 
+-	tmp_deplibs=
+-	for test_deplib in $deplibs; do
+-	  case " $convenience " in
+-	  *" $test_deplib "*) ;;
+-	  *)
+-	    tmp_deplibs="$tmp_deplibs $test_deplib"
+-	    ;;
+-	  esac
+-	done
+-	deplibs="$tmp_deplibs"
++      # template prelinking step
++      if test -n "$prelink_cmds"; then
++	func_execute_cmds "$prelink_cmds" 'exit $?'
++      fi
+ 
+-	if test -n "$convenience"; then
+-	  if test -n "$whole_archive_flag_spec" &&
+-	    test "$compiler_needs_object" = yes &&
+-	    test -z "$libobjs"; then
+-	    # extract the archives, so we have objects to list.
+-	    # TODO: could optimize this to just extract one archive.
+-	    whole_archive_flag_spec=
+-	  fi
+-	  if test -n "$whole_archive_flag_spec"; then
+-	    save_libobjs=$libobjs
+-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+-	    test "X$libobjs" = "X " && libobjs=
+-	  else
+-	    gentop="$output_objdir/${outputname}x"
+-	    generated="$generated $gentop"
++      wrappers_required=yes
++      case $host in
++      *cygwin* | *mingw* )
++        if test "$build_libtool_libs" != yes; then
++          wrappers_required=no
++        fi
++        ;;
++      *)
++        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
++          wrappers_required=no
++        fi
++        ;;
++      esac
++      if test "$wrappers_required" = no; then
++	# Replace the output file specification.
++	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++	link_command="$compile_command$compile_rpath"
+ 
+-	    func_extract_archives $gentop $convenience
+-	    libobjs="$libobjs $func_extract_archives_result"
+-	    test "X$libobjs" = "X " && libobjs=
+-	  fi
+-	fi
++	# We have no uninstalled library dependencies, so finalize right now.
++	exit_status=0
++	func_show_eval "$link_command" 'exit_status=$?'
+ 
+-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+-	  eval flag=\"$thread_safe_flag_spec\"
+-	  linker_flags="$linker_flags $flag"
++	# Delete the generated files.
++	if test -f "$output_objdir/${outputname}S.${objext}"; then
++	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ 	fi
+ 
+-	# Make a backup of the uninstalled library when relinking
+-	if test "$mode" = relink; then
+-	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+-	fi
++	exit $exit_status
++      fi
+ 
+-	# Do each of the archive commands.
+-	if test "$module" = yes && test -n "$module_cmds" ; then
+-	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+-	    eval test_cmds=\"$module_expsym_cmds\"
+-	    cmds=$module_expsym_cmds
+-	  else
+-	    eval test_cmds=\"$module_cmds\"
+-	    cmds=$module_cmds
+-	  fi
+-	else
+-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+-	    eval test_cmds=\"$archive_expsym_cmds\"
+-	    cmds=$archive_expsym_cmds
+-	  else
+-	    eval test_cmds=\"$archive_cmds\"
+-	    cmds=$archive_cmds
+-	  fi
+-	fi
++      if test -n "$compile_shlibpath$finalize_shlibpath"; then
++	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
++      fi
++      if test -n "$finalize_shlibpath"; then
++	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
++      fi
+ 
+-	if test "X$skipped_export" != "X:" &&
+-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+-	  :
+-	else
+-	  # The command line is too long to link in one step, link piecewise
+-	  # or, if using GNU ld and skipped_export is not :, use a linker
+-	  # script.
++      compile_var=
++      finalize_var=
++      if test -n "$runpath_var"; then
++	if test -n "$perm_rpath"; then
++	  # We should set the runpath_var.
++	  rpath=
++	  for dir in $perm_rpath; do
++	    rpath="$rpath$dir:"
++	  done
++	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
++	fi
++	if test -n "$finalize_perm_rpath"; then
++	  # We should set the runpath_var.
++	  rpath=
++	  for dir in $finalize_perm_rpath; do
++	    rpath="$rpath$dir:"
++	  done
++	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
++	fi
++      fi
+ 
+-	  # Save the value of $output and $libobjs because we want to
+-	  # use them later.  If we have whole_archive_flag_spec, we
+-	  # want to use save_libobjs as it was before
+-	  # whole_archive_flag_spec was expanded, because we can't
+-	  # assume the linker understands whole_archive_flag_spec.
+-	  # This may have to be revisited, in case too many
+-	  # convenience libraries get linked in and end up exceeding
+-	  # the spec.
+-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+-	    save_libobjs=$libobjs
+-	  fi
+-	  save_output=$output
+-	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
++      if test "$no_install" = yes; then
++	# We don't need to create a wrapper script.
++	link_command="$compile_var$compile_command$compile_rpath"
++	# Replace the output file specification.
++	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++	# Delete the old output file.
++	$opt_dry_run || $RM $output
++	# Link the executable and exit
++	func_show_eval "$link_command" 'exit $?'
++	exit $EXIT_SUCCESS
++      fi
+ 
+-	  # Clear the reloadable object creation command queue and
+-	  # initialize k to one.
+-	  test_cmds=
+-	  concat_cmds=
+-	  objlist=
+-	  last_robj=
+-	  k=1
++      if test "$hardcode_action" = relink; then
++	# Fast installation is not supported
++	link_command="$compile_var$compile_command$compile_rpath"
++	relink_command="$finalize_var$finalize_command$finalize_rpath"
+ 
+-	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+-	    output=${output_objdir}/${output_la}.lnkscript
+-	    func_echo "creating GNU ld script: $output"
+-	    $ECHO 'INPUT (' > $output
+-	    for obj in $save_libobjs
+-	    do
+-	      $ECHO "$obj" >> $output
+-	    done
+-	    $ECHO ')' >> $output
+-	    delfiles="$delfiles $output"
+-	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+-	    output=${output_objdir}/${output_la}.lnk
+-	    func_echo "creating linker input file list: $output"
+-	    : > $output
+-	    set x $save_libobjs
+-	    shift
+-	    firstobj=
+-	    if test "$compiler_needs_object" = yes; then
+-	      firstobj="$1 "
+-	      shift
+-	    fi
+-	    for obj
+-	    do
+-	      $ECHO "$obj" >> $output
+-	    done
+-	    delfiles="$delfiles $output"
+-	    output=$firstobj\"$file_list_spec$output\"
++	func_warning "this platform does not like uninstalled shared libraries"
++	func_warning "\`$output' will be relinked during installation"
++      else
++	if test "$fast_install" != no; then
++	  link_command="$finalize_var$compile_command$finalize_rpath"
++	  if test "$fast_install" = yes; then
++	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+ 	  else
+-	    if test -n "$save_libobjs"; then
+-	      func_echo "creating reloadable object files..."
+-	      output=$output_objdir/$output_la-${k}.$objext
+-	      # Loop over the list of objects to be linked.
+-	      for obj in $save_libobjs
+-	      do
+-		eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+-		if test "X$objlist" = X ||
+-		   { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+-		     test "$len" -le "$max_cmd_len"; }; then
+-		  objlist="$objlist $obj"
+-		else
+-		  # The command $test_cmds is almost too long, add a
+-		  # command to the queue.
+-		  if test "$k" -eq 1 ; then
+-		    # The first file doesn't have a previous command to add.
+-		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+-		  else
+-		    # All subsequent reloadable object files will link in
+-		    # the last one created.
+-		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+-		  fi
+-		  last_robj=$output_objdir/$output_la-${k}.$objext
+-		  k=`expr $k + 1`
+-		  output=$output_objdir/$output_la-${k}.$objext
+-		  objlist=$obj
+-		  len=1
+-		fi
+-	      done
+-	      # Handle the remaining objects by creating one last
+-	      # reloadable object file.  All subsequent reloadable object
+-	      # files will link in the last one created.
+-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+-
+-	      # Set up a command to remove the reloadable object files
+-	      # after they are used.
+-	      i=0
+-	      while test "$i" -lt "$k"
+-	      do
+-		i=`expr $i + 1`
+-		delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+-	      done
+-	    else
+-	      output=
+-	    fi
+-
+-	    if ${skipped_export-false}; then
+-	      func_echo "generating symbol list for \`$libname.la'"
+-	      export_symbols="$output_objdir/$libname.exp"
+-	      $opt_dry_run || $RM $export_symbols
+-	      libobjs=$output
+-	      # Append the command to create the export file.
+-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+-	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+-	    fi
++	    # fast_install is set to needless
++	    relink_command=
++	  fi
++	else
++	  link_command="$compile_var$compile_command$compile_rpath"
++	  relink_command="$finalize_var$finalize_command$finalize_rpath"
++	fi
++      fi
+ 
+-	    test -n "$save_libobjs" &&
+-	      func_echo "creating a temporary reloadable object file: $output"
++      # Replace the output file specification.
++      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+ 
+-	    # Loop through the commands generated above and execute them.
+-	    save_ifs="$IFS"; IFS='~'
+-	    for cmd in $concat_cmds; do
+-	      IFS="$save_ifs"
+-	      $opt_silent || {
+-		  func_quote_for_expand "$cmd"
+-		  eval "func_echo $func_quote_for_expand_result"
+-	      }
+-	      $opt_dry_run || eval "$cmd" || {
+-		lt_exit=$?
++      # Delete the old output files.
++      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+ 
+-		# Restore the uninstalled library and exit
+-		if test "$mode" = relink; then
+-		  ( cd "$output_objdir" && \
+-		    $RM "${realname}T" && \
+-		    $MV "${realname}U" "$realname" )
+-		fi
++      func_show_eval "$link_command" 'exit $?'
+ 
+-		exit $lt_exit
+-	      }
+-	    done
+-	    IFS="$save_ifs"
++      # Now create the wrapper script.
++      func_echo "creating $output"
+ 
+-	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+-	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+-	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+-	    fi
++      # Quote the relink command for shipping.
++      if test -n "$relink_command"; then
++	# Preserve any variables that may affect compiler behavior
++	for var in $variables_saved_for_relink; do
++	  if eval test -z \"\${$var+set}\"; then
++	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
++	  elif eval var_value=\$$var; test -z "$var_value"; then
++	    relink_command="$var=; export $var; $relink_command"
++	  else
++	    func_quote_for_eval "$var_value"
++	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ 	  fi
++	done
++	relink_command="(cd `pwd`; $relink_command)"
++	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++      fi
+ 
+-          if ${skipped_export-false}; then
+-	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+-	      tmp_export_symbols="$export_symbols"
+-	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+-	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+-	    fi
+-
+-	    if test -n "$orig_export_symbols"; then
+-	      # The given exports_symbols file has to be filtered, so filter it.
+-	      func_echo "filter symbol list for \`$libname.la' to tag DATA exports"
+-	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+-	      # 's' commands which not all seds can handle. GNU sed should be fine
+-	      # though. Also, the filter scales superlinearly with the number of
+-	      # global variables. join(1) would be nice here, but unfortunately
+-	      # isn't a blessed tool.
+-	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+-	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+-	      export_symbols=$output_objdir/$libname.def
+-	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+-	    fi
+-	  fi
++      # Quote $ECHO for shipping.
++      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
++	case $progpath in
++	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
++	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
++	esac
++	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
++      else
++	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
++      fi
+ 
+-	  libobjs=$output
+-	  # Restore the value of output.
+-	  output=$save_output
++      # Only actually do things if not in dry run mode.
++      $opt_dry_run || {
++	# win32 will think the script is a binary if it has
++	# a .exe suffix, so we strip it off here.
++	case $output in
++	  *.exe) func_stripname '' '.exe' "$output"
++	         output=$func_stripname_result ;;
++	esac
++	# test for cygwin because mv fails w/o .exe extensions
++	case $host in
++	  *cygwin*)
++	    exeext=.exe
++	    func_stripname '' '.exe' "$outputname"
++	    outputname=$func_stripname_result ;;
++	  *) exeext= ;;
++	esac
++	case $host in
++	  *cygwin* | *mingw* )
++	    output_name=`basename $output`
++	    output_path=`dirname $output`
++	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
++	    cwrapper="$output_path/$output_name.exe"
++	    $RM $cwrappersource $cwrapper
++	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+ 
+-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+-	    test "X$libobjs" = "X " && libobjs=
+-	  fi
+-	  # Expand the library linking commands again to reset the
+-	  # value of $libobjs for piecewise linking.
++	    cat > $cwrappersource <<EOF
+ 
+-	  # Do each of the archive commands.
+-	  if test "$module" = yes && test -n "$module_cmds" ; then
+-	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+-	      cmds=$module_expsym_cmds
+-	    else
+-	      cmds=$module_cmds
+-	    fi
+-	  else
+-	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+-	      cmds=$archive_expsym_cmds
+-	    else
+-	      cmds=$archive_cmds
+-	    fi
+-	  fi
+-	fi
++/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
++   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+ 
+-	if test -n "$delfiles"; then
+-	  # Append the command to remove temporary files to $cmds.
+-	  eval cmds=\"\$cmds~\$RM $delfiles\"
+-	fi
++   The $output program cannot be directly executed until all the libtool
++   libraries that it depends on are installed.
+ 
+-	# Add any objects from preloaded convenience libraries
+-	if test -n "$dlprefiles"; then
+-	  gentop="$output_objdir/${outputname}x"
+-	  generated="$generated $gentop"
++   This wrapper executable should never be moved out of the build directory.
++   If it is, it will not operate correctly.
+ 
+-	  func_extract_archives $gentop $dlprefiles
+-	  libobjs="$libobjs $func_extract_archives_result"
+-	  test "X$libobjs" = "X " && libobjs=
+-	fi
++   Currently, it simply execs the wrapper *script* "/bin/sh $output",
++   but could eventually absorb all of the scripts functionality and
++   exec $objdir/$outputname directly.
++*/
++EOF
++	    cat >> $cwrappersource<<"EOF"
++#include <stdio.h>
++#include <stdlib.h>
++#include <unistd.h>
++#include <malloc.h>
++#include <stdarg.h>
++#include <assert.h>
++#include <string.h>
++#include <ctype.h>
++#include <sys/stat.h>
+ 
+-	save_ifs="$IFS"; IFS='~'
+-	for cmd in $cmds; do
+-	  IFS="$save_ifs"
+-	  eval cmd=\"$cmd\"
+-	  $opt_silent || {
+-	    func_quote_for_expand "$cmd"
+-	    eval "func_echo $func_quote_for_expand_result"
+-	  }
+-	  $opt_dry_run || eval "$cmd" || {
+-	    lt_exit=$?
++#if defined(PATH_MAX)
++# define LT_PATHMAX PATH_MAX
++#elif defined(MAXPATHLEN)
++# define LT_PATHMAX MAXPATHLEN
++#else
++# define LT_PATHMAX 1024
++#endif
+ 
+-	    # Restore the uninstalled library and exit
+-	    if test "$mode" = relink; then
+-	      ( cd "$output_objdir" && \
+-	        $RM "${realname}T" && \
+-		$MV "${realname}U" "$realname" )
+-	    fi
++#ifndef DIR_SEPARATOR
++# define DIR_SEPARATOR '/'
++# define PATH_SEPARATOR ':'
++#endif
+ 
+-	    exit $lt_exit
+-	  }
+-	done
+-	IFS="$save_ifs"
++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
++  defined (__OS2__)
++# define HAVE_DOS_BASED_FILE_SYSTEM
++# ifndef DIR_SEPARATOR_2
++#  define DIR_SEPARATOR_2 '\\'
++# endif
++# ifndef PATH_SEPARATOR_2
++#  define PATH_SEPARATOR_2 ';'
++# endif
++#endif
+ 
+-	# Restore the uninstalled library and exit
+-	if test "$mode" = relink; then
+-	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
++#ifndef DIR_SEPARATOR_2
++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
++#else /* DIR_SEPARATOR_2 */
++# define IS_DIR_SEPARATOR(ch) \
++	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
++#endif /* DIR_SEPARATOR_2 */
+ 
+-	  if test -n "$convenience"; then
+-	    if test -z "$whole_archive_flag_spec"; then
+-	      func_show_eval '${RM}r "$gentop"'
+-	    fi
+-	  fi
++#ifndef PATH_SEPARATOR_2
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
++#else /* PATH_SEPARATOR_2 */
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
++#endif /* PATH_SEPARATOR_2 */
+ 
+-	  exit $EXIT_SUCCESS
+-	fi
++#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
++#define XFREE(stale) do { \
++  if (stale) { free ((void *) stale); stale = 0; } \
++} while (0)
+ 
+-	# Create links to the real library.
+-	for linkname in $linknames; do
+-	  if test "$realname" != "$linkname"; then
+-	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+-	  fi
+-	done
++/* -DDEBUG is fairly common in CFLAGS.  */
++#undef DEBUG
++#if defined DEBUGWRAPPER
++# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
++#else
++# define DEBUG(format, ...)
++#endif
+ 
+-	# If -module or -export-dynamic was specified, set the dlname.
+-	if test "$module" = yes || test "$export_dynamic" = yes; then
+-	  # On all known operating systems, these are identical.
+-	  dlname="$soname"
+-	fi
+-      fi
+-      ;;
++const char *program_name = NULL;
+ 
+-    obj)
+-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+-	func_warning "\`-dlopen' is ignored for objects"
+-      fi
++void * xmalloc (size_t num);
++char * xstrdup (const char *string);
++const char * base_name (const char *name);
++char * find_executable(const char *wrapper);
++int    check_executable(const char *path);
++char * strendzap(char *str, const char *pat);
++void lt_fatal (const char *message, ...);
+ 
+-      test -n "$deplibs" && \
+-	func_warning "\`-l' and \`-L' are ignored for objects"
++int
++main (int argc, char *argv[])
++{
++  char **newargz;
++  int i;
++
++  program_name = (char *) xstrdup (base_name (argv[0]));
++  DEBUG("(main) argv[0]      : %s\n",argv[0]);
++  DEBUG("(main) program_name : %s\n",program_name);
++  newargz = XMALLOC(char *, argc+2);
++EOF
++
++	    cat >> $cwrappersource <<EOF
++  newargz[0] = (char *) xstrdup("$SHELL");
++EOF
++
++	    cat >> $cwrappersource <<"EOF"
++  newargz[1] = find_executable(argv[0]);
++  if (newargz[1] == NULL)
++    lt_fatal("Couldn't find %s", argv[0]);
++  DEBUG("(main) found exe at : %s\n",newargz[1]);
++  /* we know the script has the same name, without the .exe */
++  /* so make sure newargz[1] doesn't end in .exe */
++  strendzap(newargz[1],".exe");
++  for (i = 1; i < argc; i++)
++    newargz[i+1] = xstrdup(argv[i]);
++  newargz[argc+1] = NULL;
+ 
+-      test -n "$rpath" && \
+-	func_warning "\`-rpath' is ignored for objects"
++  for (i=0; i<argc+1; i++)
++  {
++    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
++    ;
++  }
+ 
+-      test -n "$xrpath" && \
+-	func_warning "\`-R' is ignored for objects"
++EOF
+ 
+-      test -n "$vinfo" && \
+-	func_warning "\`-version-info' is ignored for objects"
++	    case $host_os in
++	      mingw*)
++		cat >> $cwrappersource <<EOF
++  execv("$SHELL",(char const **)newargz);
++EOF
++	      ;;
++	      *)
++		cat >> $cwrappersource <<EOF
++  execv("$SHELL",newargz);
++EOF
++	      ;;
++	    esac
+ 
+-      test -n "$release" && \
+-	func_warning "\`-release' is ignored for objects"
++	    cat >> $cwrappersource <<"EOF"
++  return 127;
++}
+ 
+-      case $output in
+-      *.lo)
+-	test -n "$objs$old_deplibs" && \
+-	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
++void *
++xmalloc (size_t num)
++{
++  void * p = (void *) malloc (num);
++  if (!p)
++    lt_fatal ("Memory exhausted");
+ 
+-	libobj=$output
+-	func_lo2o "$libobj"
+-	obj=$func_lo2o_result
+-	;;
+-      *)
+-	libobj=
+-	obj="$output"
+-	;;
+-      esac
++  return p;
++}
+ 
+-      # Delete the old objects.
+-      $opt_dry_run || $RM $obj $libobj
++char *
++xstrdup (const char *string)
++{
++  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
++;
++}
+ 
+-      # Objects from convenience libraries.  This assumes
+-      # single-version convenience libraries.  Whenever we create
+-      # different ones for PIC/non-PIC, this we'll have to duplicate
+-      # the extraction.
+-      reload_conv_objs=
+-      gentop=
+-      # reload_cmds runs $LD directly, so let us get rid of
+-      # -Wl from whole_archive_flag_spec and hope we can get by with
+-      # turning comma into space..
+-      wl=
++const char *
++base_name (const char *name)
++{
++  const char *base;
+ 
+-      if test -n "$convenience"; then
+-	if test -n "$whole_archive_flag_spec"; then
+-	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+-	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+-	else
+-	  gentop="$output_objdir/${obj}x"
+-	  generated="$generated $gentop"
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++  /* Skip over the disk name in MSDOS pathnames. */
++  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
++    name += 2;
++#endif
+ 
+-	  func_extract_archives $gentop $convenience
+-	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+-	fi
+-      fi
++  for (base = name; *name; name++)
++    if (IS_DIR_SEPARATOR (*name))
++      base = name + 1;
++  return base;
++}
+ 
+-      # Create the old-style object.
+-      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
++int
++check_executable(const char * path)
++{
++  struct stat st;
+ 
+-      output="$obj"
+-      func_execute_cmds "$reload_cmds" 'exit $?'
++  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
++  if ((!path) || (!*path))
++    return 0;
+ 
+-      # Exit if we aren't doing a library object file.
+-      if test -z "$libobj"; then
+-	if test -n "$gentop"; then
+-	  func_show_eval '${RM}r "$gentop"'
+-	fi
++  if ((stat (path, &st) >= 0) &&
++      (
++	/* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
++#if defined (S_IXOTH)
++       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
++#endif
++#if defined (S_IXGRP)
++       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
++#endif
++       ((st.st_mode & S_IXUSR) == S_IXUSR))
++      )
++    return 1;
++  else
++    return 0;
++}
+ 
+-	exit $EXIT_SUCCESS
+-      fi
++/* Searches for the full path of the wrapper.  Returns
++   newly allocated full path name if found, NULL otherwise */
++char *
++find_executable (const char* wrapper)
++{
++  int has_slash = 0;
++  const char* p;
++  const char* p_next;
++  /* static buffer for getcwd */
++  char tmp[LT_PATHMAX + 1];
++  int tmp_len;
++  char* concat_name;
+ 
+-      if test "$build_libtool_libs" != yes; then
+-	if test -n "$gentop"; then
+-	  func_show_eval '${RM}r "$gentop"'
+-	fi
++  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+ 
+-	# Create an invalid libtool object if no PIC, so that we don't
+-	# accidentally link it into a program.
+-	# $show "echo timestamp > $libobj"
+-	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+-	exit $EXIT_SUCCESS
+-      fi
++  if ((wrapper == NULL) || (*wrapper == '\0'))
++    return NULL;
+ 
+-      if test -n "$pic_flag" || test "$pic_mode" != default; then
+-	# Only do commands if we really have different PIC objects.
+-	reload_objs="$libobjs $reload_conv_objs"
+-	output="$libobj"
+-	func_execute_cmds "$reload_cmds" 'exit $?'
+-      fi
++  /* Absolute path? */
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
++  {
++    concat_name = xstrdup (wrapper);
++    if (check_executable(concat_name))
++      return concat_name;
++    XFREE(concat_name);
++  }
++  else
++  {
++#endif
++    if (IS_DIR_SEPARATOR (wrapper[0]))
++    {
++      concat_name = xstrdup (wrapper);
++      if (check_executable(concat_name))
++	return concat_name;
++      XFREE(concat_name);
++    }
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++  }
++#endif
+ 
+-      if test -n "$gentop"; then
+-	func_show_eval '${RM}r "$gentop"'
+-      fi
++  for (p = wrapper; *p; p++)
++    if (*p == '/')
++    {
++      has_slash = 1;
++      break;
++    }
++  if (!has_slash)
++  {
++    /* no slashes; search PATH */
++    const char* path = getenv ("PATH");
++    if (path != NULL)
++    {
++      for (p = path; *p; p = p_next)
++      {
++	const char* q;
++	size_t p_len;
++	for (q = p; *q; q++)
++	  if (IS_PATH_SEPARATOR(*q))
++	    break;
++	p_len = q - p;
++	p_next = (*q == '\0' ? q : q + 1);
++	if (p_len == 0)
++	{
++	  /* empty path: current directory */
++	  if (getcwd (tmp, LT_PATHMAX) == NULL)
++	    lt_fatal ("getcwd failed");
++	  tmp_len = strlen(tmp);
++	  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
++	  memcpy (concat_name, tmp, tmp_len);
++	  concat_name[tmp_len] = '/';
++	  strcpy (concat_name + tmp_len + 1, wrapper);
++	}
++	else
++	{
++	  concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
++	  memcpy (concat_name, p, p_len);
++	  concat_name[p_len] = '/';
++	  strcpy (concat_name + p_len + 1, wrapper);
++	}
++	if (check_executable(concat_name))
++	  return concat_name;
++	XFREE(concat_name);
++      }
++    }
++    /* not found in PATH; assume curdir */
++  }
++  /* Relative path | not found in path: prepend cwd */
++  if (getcwd (tmp, LT_PATHMAX) == NULL)
++    lt_fatal ("getcwd failed");
++  tmp_len = strlen(tmp);
++  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
++  memcpy (concat_name, tmp, tmp_len);
++  concat_name[tmp_len] = '/';
++  strcpy (concat_name + tmp_len + 1, wrapper);
+ 
+-      exit $EXIT_SUCCESS
+-      ;;
++  if (check_executable(concat_name))
++    return concat_name;
++  XFREE(concat_name);
++  return NULL;
++}
+ 
+-    prog)
+-      case $host in
+-	*cygwin*) func_stripname '' '.exe' "$output"
+-	          output=$func_stripname_result.exe;;
+-      esac
+-      test -n "$vinfo" && \
+-	func_warning "\`-version-info' is ignored for programs"
++char *
++strendzap(char *str, const char *pat)
++{
++  size_t len, patlen;
+ 
+-      test -n "$release" && \
+-	func_warning "\`-release' is ignored for programs"
++  assert(str != NULL);
++  assert(pat != NULL);
+ 
+-      test "$preload" = yes \
+-        && test "$dlopen_support" = unknown \
+-	&& test "$dlopen_self" = unknown \
+-	&& test "$dlopen_self_static" = unknown && \
+-	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
++  len = strlen(str);
++  patlen = strlen(pat);
+ 
+-      case $host in
+-      *-*-rhapsody* | *-*-darwin1.[012])
+-	# On Rhapsody replace the C library is the System framework
+-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+-	;;
+-      esac
++  if (patlen <= len)
++  {
++    str += len - patlen;
++    if (strcmp(str, pat) == 0)
++      *str = '\0';
++  }
++  return str;
++}
+ 
+-      case $host in
+-      *-*-darwin*)
+-	# Don't allow lazy linking, it breaks C++ global constructors
+-	# But is supposedly fixed on 10.4 or later (yay!).
+-	if test "$tagname" = CXX ; then
+-	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+-	    10.[0123])
+-	      compile_command="$compile_command ${wl}-bind_at_load"
+-	      finalize_command="$finalize_command ${wl}-bind_at_load"
+-	    ;;
+-	  esac
+-	fi
+-	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+-	;;
+-      esac
++static void
++lt_error_core (int exit_status, const char * mode,
++	  const char * message, va_list ap)
++{
++  fprintf (stderr, "%s: %s: ", program_name, mode);
++  vfprintf (stderr, message, ap);
++  fprintf (stderr, ".\n");
+ 
++  if (exit_status >= 0)
++    exit (exit_status);
++}
+ 
+-      # move library search paths that coincide with paths to not yet
+-      # installed libraries to the beginning of the library search list
+-      new_libs=
+-      for path in $notinst_path; do
+-	case " $new_libs " in
+-	*" -L$path/$objdir "*) ;;
+-	*)
+-	  case " $compile_deplibs " in
+-	  *" -L$path/$objdir "*)
+-	    new_libs="$new_libs -L$path/$objdir" ;;
+-	  esac
+-	  ;;
+-	esac
+-      done
+-      for deplib in $compile_deplibs; do
+-	case $deplib in
+-	-L*)
+-	  case " $new_libs " in
+-	  *" $deplib "*) ;;
+-	  *) new_libs="$new_libs $deplib" ;;
+-	  esac
++void
++lt_fatal (const char *message, ...)
++{
++  va_list ap;
++  va_start (ap, message);
++  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
++  va_end (ap);
++}
++EOF
++	  # we should really use a build-platform specific compiler
++	  # here, but OTOH, the wrappers (shell script and this C one)
++	  # are only useful if you want to execute the "real" binary.
++	  # Since the "real" binary is built for $host, then this
++	  # wrapper might as well be built for $host, too.
++	  $opt_dry_run || $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+ 	  ;;
+-	*) new_libs="$new_libs $deplib" ;;
+ 	esac
+-      done
+-      compile_deplibs="$new_libs"
+-
++	$RM $output
++	trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+ 
+-      compile_command="$compile_command $compile_deplibs"
+-      finalize_command="$finalize_command $finalize_deplibs"
++	$ECHO > $output "\
++#! $SHELL
+ 
+-      if test -n "$rpath$xrpath"; then
+-	# If the user specified any rpath flags, then add them.
+-	for libdir in $rpath $xrpath; do
+-	  # This is the magic to use -rpath.
+-	  case "$finalize_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+-	  esac
+-	done
+-      fi
++# $output - temporary wrapper script for $objdir/$outputname
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++#
++# The $output program cannot be directly executed until all the libtool
++# libraries that it depends on are installed.
++#
++# This wrapper script should never be moved out of the build directory.
++# If it is, it will not operate correctly.
+ 
+-      # Now hardcode the library paths
+-      rpath=
+-      hardcode_libdirs=
+-      for libdir in $compile_rpath $finalize_rpath; do
+-	if test -n "$hardcode_libdir_flag_spec"; then
+-	  if test -n "$hardcode_libdir_separator"; then
+-	    if test -z "$hardcode_libdirs"; then
+-	      hardcode_libdirs="$libdir"
+-	    else
+-	      # Just accumulate the unique libdirs.
+-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+-		;;
+-	      *)
+-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+-		;;
+-	      esac
+-	    fi
+-	  else
+-	    eval flag=\"$hardcode_libdir_flag_spec\"
+-	    rpath="$rpath $flag"
+-	  fi
+-	elif test -n "$runpath_var"; then
+-	  case "$perm_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) perm_rpath="$perm_rpath $libdir" ;;
+-	  esac
+-	fi
+-	case $host in
+-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+-	  case :$dllsearchpath: in
+-	  *":$libdir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$libdir";;
+-	  esac
+-	  case :$dllsearchpath: in
+-	  *":$testbindir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+-	  esac
+-	  ;;
+-	esac
+-      done
+-      # Substitute the hardcoded libdirs into the rpath.
+-      if test -n "$hardcode_libdir_separator" &&
+-	 test -n "$hardcode_libdirs"; then
+-	libdir="$hardcode_libdirs"
+-	eval rpath=\" $hardcode_libdir_flag_spec\"
+-      fi
+-      compile_rpath="$rpath"
++# Sed substitution that helps us do robust quoting.  It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed='${SED} -e 1s/^X//'
++sed_quote_subst='$sed_quote_subst'
+ 
+-      rpath=
+-      hardcode_libdirs=
+-      for libdir in $finalize_rpath; do
+-	if test -n "$hardcode_libdir_flag_spec"; then
+-	  if test -n "$hardcode_libdir_separator"; then
+-	    if test -z "$hardcode_libdirs"; then
+-	      hardcode_libdirs="$libdir"
+-	    else
+-	      # Just accumulate the unique libdirs.
+-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+-		;;
+-	      *)
+-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+-		;;
+-	      esac
+-	    fi
+-	  else
+-	    eval flag=\"$hardcode_libdir_flag_spec\"
+-	    rpath="$rpath $flag"
+-	  fi
+-	elif test -n "$runpath_var"; then
+-	  case "$finalize_perm_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+-	  esac
+-	fi
+-      done
+-      # Substitute the hardcoded libdirs into the rpath.
+-      if test -n "$hardcode_libdir_separator" &&
+-	 test -n "$hardcode_libdirs"; then
+-	libdir="$hardcode_libdirs"
+-	eval rpath=\" $hardcode_libdir_flag_spec\"
+-      fi
+-      finalize_rpath="$rpath"
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+ 
+-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+-	# Transform all the library objects into standard objects.
+-	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-      fi
++relink_command=\"$relink_command\"
+ 
+-      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
++# This environment variable determines our operation mode.
++if test \"\$libtool_install_magic\" = \"$magic\"; then
++  # install mode needs the following variables:
++  generated_by_libtool_version='$macro_version'
++  notinst_deplibs='$notinst_deplibs'
++else
++  # When we are sourced in execute mode, \$file and \$ECHO are already set.
++  if test \"\$libtool_execute_magic\" != \"$magic\"; then
++    ECHO=\"$qecho\"
++    file=\"\$0\"
++    # Make sure echo works.
++    if test \"X\$1\" = X--no-reexec; then
++      # Discard the --no-reexec flag, and continue.
++      shift
++    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
++      # Yippee, \$ECHO works!
++      :
++    else
++      # Restart under the correct shell, and then maybe \$ECHO will work.
++      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
++    fi
++  fi\
++"
++	$ECHO >> $output "\
+ 
+-      # template prelinking step
+-      if test -n "$prelink_cmds"; then
+-	func_execute_cmds "$prelink_cmds" 'exit $?'
+-      fi
++  # Find the directory that this script lives in.
++  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
++  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+ 
+-      wrappers_required=yes
+-      case $host in
+-      *cygwin* | *mingw* )
+-        if test "$build_libtool_libs" != yes; then
+-          wrappers_required=no
+-        fi
+-        ;;
+-      *)
+-        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+-          wrappers_required=no
+-        fi
+-        ;;
++  # Follow symbolic links until we get to the real thisdir.
++  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
++  while test -n \"\$file\"; do
++    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
++
++    # If there was a directory component, then change thisdir.
++    if test \"x\$destdir\" != \"x\$file\"; then
++      case \"\$destdir\" in
++      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
++      *) thisdir=\"\$thisdir/\$destdir\" ;;
+       esac
+-      if test "$wrappers_required" = no; then
+-	# Replace the output file specification.
+-	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+-	link_command="$compile_command$compile_rpath"
++    fi
+ 
+-	# We have no uninstalled library dependencies, so finalize right now.
+-	exit_status=0
+-	func_show_eval "$link_command" 'exit_status=$?'
++    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
++    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
++  done
+ 
+-	# Delete the generated files.
+-	if test -f "$output_objdir/${outputname}S.${objext}"; then
+-	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+-	fi
++  # Try to get the absolute directory name.
++  absdir=\`cd \"\$thisdir\" && pwd\`
++  test -n \"\$absdir\" && thisdir=\"\$absdir\"
++"
+ 
+-	exit $exit_status
+-      fi
++	if test "$fast_install" = yes; then
++	  $ECHO >> $output "\
++  program=lt-'$outputname'$exeext
++  progdir=\"\$thisdir/$objdir\"
+ 
+-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+-      fi
+-      if test -n "$finalize_shlibpath"; then
+-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+-      fi
++  if test ! -f \"\$progdir/\$program\" ||
++     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
++       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+ 
+-      compile_var=
+-      finalize_var=
+-      if test -n "$runpath_var"; then
+-	if test -n "$perm_rpath"; then
+-	  # We should set the runpath_var.
+-	  rpath=
+-	  for dir in $perm_rpath; do
+-	    rpath="$rpath$dir:"
+-	  done
+-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+-	fi
+-	if test -n "$finalize_perm_rpath"; then
+-	  # We should set the runpath_var.
+-	  rpath=
+-	  for dir in $finalize_perm_rpath; do
+-	    rpath="$rpath$dir:"
+-	  done
+-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+-	fi
+-      fi
++    file=\"\$\$-\$program\"
+ 
+-      if test "$no_install" = yes; then
+-	# We don't need to create a wrapper script.
+-	link_command="$compile_var$compile_command$compile_rpath"
+-	# Replace the output file specification.
+-	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+-	# Delete the old output file.
+-	$opt_dry_run || $RM $output
+-	# Link the executable and exit
+-	func_show_eval "$link_command" 'exit $?'
+-	exit $EXIT_SUCCESS
+-      fi
++    if test ! -d \"\$progdir\"; then
++      $MKDIR \"\$progdir\"
++    else
++      $RM \"\$progdir/\$file\"
++    fi"
+ 
+-      if test "$hardcode_action" = relink; then
+-	# Fast installation is not supported
+-	link_command="$compile_var$compile_command$compile_rpath"
+-	relink_command="$finalize_var$finalize_command$finalize_rpath"
++	  $ECHO >> $output "\
+ 
+-	func_warning "this platform does not like uninstalled shared libraries"
+-	func_warning "\`$output' will be relinked during installation"
++    # relink executable if necessary
++    if test -n \"\$relink_command\"; then
++      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+       else
+-	if test "$fast_install" != no; then
+-	  link_command="$finalize_var$compile_command$finalize_rpath"
+-	  if test "$fast_install" = yes; then
+-	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+-	  else
+-	    # fast_install is set to needless
+-	    relink_command=
+-	  fi
++	$ECHO \"\$relink_command_output\" >&2
++	$RM \"\$progdir/\$file\"
++	exit 1
++      fi
++    fi
++
++    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
++    { $RM \"\$progdir/\$program\";
++      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
++    $RM \"\$progdir/\$file\"
++  fi"
+ 	else
+-	  link_command="$compile_var$compile_command$compile_rpath"
+-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
++	  $ECHO >> $output "\
++  program='$outputname'
++  progdir=\"\$thisdir/$objdir\"
++"
+ 	fi
+-      fi
+ 
+-      # Replace the output file specification.
+-      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
++	$ECHO >> $output "\
+ 
+-      # Delete the old output files.
+-      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
++  if test -f \"\$progdir/\$program\"; then"
+ 
+-      func_show_eval "$link_command" 'exit $?'
++	# Export our shlibpath_var if we have one.
++	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
++	  $ECHO >> $output "\
++    # Add our own library path to $shlibpath_var
++    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+ 
+-      # Now create the wrapper script.
+-      func_echo "creating $output"
++    # Some systems cannot cope with colon-terminated $shlibpath_var
++    # The second colon is a workaround for a bug in BeOS R4 sed
++    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+ 
+-      # Quote the relink command for shipping.
+-      if test -n "$relink_command"; then
+-	# Preserve any variables that may affect compiler behavior
+-	for var in $variables_saved_for_relink; do
+-	  if eval test -z \"\${$var+set}\"; then
+-	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+-	  elif eval var_value=\$$var; test -z "$var_value"; then
+-	    relink_command="$var=; export $var; $relink_command"
+-	  else
+-	    func_quote_for_eval "$var_value"
+-	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+-	  fi
+-	done
+-	relink_command="(cd `pwd`; $relink_command)"
+-	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+-      fi
++    export $shlibpath_var
++"
++	fi
+ 
+-      # Quote $ECHO for shipping.
+-      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
+-	case $progpath in
+-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+-	esac
+-	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
+-      else
+-	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
+-      fi
++	# fixup the dll searchpath if we need to.
++	if test -n "$dllsearchpath"; then
++	  $ECHO >> $output "\
++    # Add the dll search path components to the executable PATH
++    PATH=$dllsearchpath:\$PATH
++"
++	fi
+ 
+-      # Only actually do things if not in dry run mode.
+-      $opt_dry_run || {
+-	# win32 will think the script is a binary if it has
+-	# a .exe suffix, so we strip it off here.
+-	case $output in
+-	  *.exe) func_stripname '' '.exe' "$output"
+-	         output=$func_stripname_result ;;
+-	esac
+-	# test for cygwin because mv fails w/o .exe extensions
+-	case $host in
+-	  *cygwin*)
+-	    exeext=.exe
+-	    func_stripname '' '.exe' "$outputname"
+-	    outputname=$func_stripname_result ;;
+-	  *) exeext= ;;
+-	esac
++	$ECHO >> $output "\
++    if test \"\$libtool_execute_magic\" != \"$magic\"; then
++      # Run the actual program with our arguments.
++"
+ 	case $host in
+-	  *cygwin* | *mingw* )
+-	    output_name=`basename $output`
+-	    output_path=`dirname $output`
+-	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+-	    cwrapper="$output_path/$output_name.exe"
+-	    $RM $cwrappersource $cwrapper
+-	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+-
+-	    func_emit_libtool_cwrapperexe_source > $cwrappersource
++	# Backslashes separate directories on plain windows
++	*-*-mingw | *-*-os2*)
++	  $ECHO >> $output "\
++      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
++"
++	  ;;
+ 
+-	  # we should really use a build-platform specific compiler
+-	  # here, but OTOH, the wrappers (shell script and this C one)
+-	  # are only useful if you want to execute the "real" binary.
+-	  # Since the "real" binary is built for $host, then this
+-	  # wrapper might as well be built for $host, too.
+-	  $opt_dry_run || $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
++	*)
++	  $ECHO >> $output "\
++      exec \"\$progdir/\$program\" \${1+\"\$@\"}
++"
+ 	  ;;
+ 	esac
+-	$RM $output
+-	trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+-
+-	func_emit_libtool_wrapper_script > $output
++	$ECHO >> $output "\
++      \$ECHO \"\$0: cannot exec \$program \${1+\"\$@\"}\"
++      exit 1
++    fi
++  else
++    # The program doesn't exist.
++    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
++    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
++    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
++    exit 1
++  fi
++fi\
++"
+ 	chmod +x $output
+       }
+       exit $EXIT_SUCCESS
+@@ -7049,7 +6929,7 @@ EOF
+       # Preserve any variables that may affect compiler behavior
+       for var in $variables_saved_for_relink; do
+ 	if eval test -z \"\${$var+set}\"; then
+-	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
++	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+ 	elif eval var_value=\$$var; test -z "$var_value"; then
+ 	  relink_command="$var=; export $var; $relink_command"
+ 	else
+@@ -7205,9 +7085,6 @@ relink_command=\"$relink_command\""
+     exit $EXIT_SUCCESS
+ }
+ 
+-{ test "$mode" = link || test "$mode" = relink; } &&
+-    func_mode_link ${1+"$@"}
+-
+ 
+ # func_mode_uninstall arg...
+ func_mode_uninstall ()
+@@ -7275,7 +7152,7 @@ func_mode_uninstall ()
+       *.la)
+ 	# Possibly a libtool archive, so verify it.
+ 	if func_lalib_p "$file"; then
+-	  func_source $dir/$name
++	  . $dir/$name
+ 
+ 	  # Delete the libtool libraries and symlinks.
+ 	  for n in $library_names; do
+@@ -7313,7 +7190,7 @@ func_mode_uninstall ()
+ 	if func_lalib_p "$file"; then
+ 
+ 	  # Read the .lo file
+-	  func_source $dir/$name
++	  . $dir/$name
+ 
+ 	  # Add PIC object to the list of files to remove.
+ 	  if test -n "$pic_object" &&
+@@ -7346,7 +7223,7 @@ func_mode_uninstall ()
+ 	  # Do a test to see if this is a libtool program.
+ 	  if func_ltwrapper_p "$file"; then
+ 	    relink_command=
+-	    func_source $dir/$noexename
++	    . $dir/$noexename
+ 
+ 	    # note $name still contains .exe if it was in $file originally
+ 	    # as does the version of $file that was added into $rmfiles
+@@ -7375,21 +7252,59 @@ func_mode_uninstall ()
+     exit $exit_status
+ }
+ 
+-{ test "$mode" = uninstall || test "$mode" = clean; } &&
+-    func_mode_uninstall ${1+"$@"}
+ 
+-test -z "$mode" && {
+-  help="$generic_help"
+-  func_fatal_help "you must specify a MODE"
+-}
++# TEST SUITE MARKER ## NON-FUNCTION
++## ----------- ##
++##    Main.    ##
++## ----------- ##
+ 
+-test -z "$exec_cmd" && \
+-  func_fatal_help "invalid operation mode \`$mode'"
++{
++  # Sanity checks first:
++  func_check_version_match
+ 
+-if test -n "$exec_cmd"; then
+-  eval exec "$exec_cmd"
+-  exit $EXIT_FAILURE
+-fi
++  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
++    func_fatal_configuration "not configured to build any kind of library"
++  fi
++
++  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
++
++
++  # Darwin sucks
++  eval std_shrext=\"$shrext_cmds\"
++
++
++  # Only execute mode is allowed to have -dlopen flags.
++  if test -n "$execute_dlfiles" && test "$mode" != execute; then
++    func_error "unrecognized option \`-dlopen'"
++    $ECHO "$help" 1>&2
++    exit $EXIT_FAILURE
++  fi
++
++  # Change the help message to a mode-specific one.
++  generic_help="$help"
++  help="Try \`$progname --help --mode=$mode' for more information."
++
++  case $mode in
++    compile)		func_mode_compile ${1+"$@"}		;;
++    execute)		func_mode_execute ${1+"$@"}		;;
++    finish)		func_mode_finish ${1+"$@"}		;;
++    install)		func_mode_install ${1+"$@"}		;;
++    link|relink)	func_mode_link ${1+"$@"}		;;
++    uninstall|clean)	func_mode_uninstall ${1+"$@"}		;;
++
++    "")			help="$generic_help"
++    			func_fatal_help "you must specify a MODE"
++			;;
++  esac
++
++  test -z "$exec_cmd" && \
++    func_fatal_help "invalid operation mode \`$mode'"
++
++  if test -n "$exec_cmd"; then
++    eval exec "$exec_cmd"
++    exit $EXIT_FAILURE
++  fi
++}
+ 
+ exit $exit_status
+ 
+@@ -7418,6 +7333,3 @@ build_old_libs=`case $build_libtool_libs
+ # mode:shell-script
+ # sh-indentation:2
+ # End:
+-# vi:sw=2
+-
+-

package/fakeroot/fakeroot.mk

@@ -3,7 +3,7 @@
 # fakeroot
 #
 #############################################################
-FAKEROOT_VERSION:=1.8
+FAKEROOT_VERSION:=1.8.1
 FAKEROOT_SOURCE:=fakeroot_$(FAKEROOT_VERSION).tar.gz
 FAKEROOT_SITE:=http://ftp.debian.org/debian/pool/main/f/fakeroot
 FAKEROOT_CAT:=$(ZCAT)