configs/qemu: bump relevant configs to kernel version 3.8.x

Problematic configurations not bumped:

arm-versatilepb - IRQ failure for symbios scsi
sh4-r2d - Qemu still doesn't emulate advanced features from the UART
sparc-ss10 - Illegal instruction

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board/qemu/arm-nuri/readme.txt

@@ -7,4 +7,4 @@ graphical window is the framebuffer.
 
 Startup time is slow because of the SMP CPU emulation so be patient.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/arm-versatile/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/arm-vexpress/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/microblazebe-mmu/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/microblazeel-mmu/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/mips-malta/readme.txt

@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/mips64-malta/readme.txt

@@ -8,4 +8,4 @@ enabled.
 
 This configuration is known to be flaky.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/mipsel-malta/readme.txt

@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/powerpc-g3beige/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/powerpc-mpc8544ds/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/powerpc-virtex-ml507/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/sh4-r2d/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/sparc-ss10/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/x86/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

board/qemu/x86_64/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0

configs/qemu_arm_nuri_defconfig

@@ -14,12 +14,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySAC1"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos4"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_arm_versatile_defconfig

@@ -16,7 +16,7 @@ BR2_KERNEL_HEADERS_3_7=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.10"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.7.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_arm_vexpress_defconfig

@@ -14,12 +14,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_microblazebe_mmu_defconfig

@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.8.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
 BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazebe-mmu/system.dts"

configs/qemu_microblazeel_mmu_defconfig

@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.8.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
 BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazeel-mmu/system.dts"

configs/qemu_mips64_malta_defconfig

@@ -10,15 +10,15 @@ BR2_PREFER_STATIC_LIB=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips_malta_defconfig

@@ -6,15 +6,15 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mipsel_malta_defconfig

@@ -6,15 +6,15 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_g3beige_defconfig

@@ -6,15 +6,15 @@ BR2_powerpc_750=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_mpc8544ds_defconfig

@@ -6,13 +6,13 @@ BR2_powerpc_8548=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx"
 BR2_LINUX_KERNEL_VMLINUX=y
 

configs/qemu_ppc_virtex_ml507_defconfig

@@ -6,8 +6,8 @@ BR2_powerpc_440=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
 
 # Use soft float
 BR2_SOFT_FLOAT=y
@@ -15,7 +15,7 @@ BR2_SOFT_FLOAT=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_DEFCONFIG="44x/virtex5"
 BR2_LINUX_KERNEL_VMLINUX=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/qemu_sh4_r2d_defconfig

@@ -20,7 +20,7 @@ BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu"
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.38"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.39"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.2.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sparc_ss10_defconfig

@@ -12,6 +12,6 @@ BR2_KERNEL_HEADERS_3_7=y
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.10"
 BR2_LINUX_KERNEL_DEFCONFIG="sparc32"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_x86_64_defconfig

@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.8.config"

configs/qemu_x86_defconfig

@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.8.config"