packages: rename FOO_MAKE_OPT into FOO_MAKE_OPTS

While the autotools infrastructure was using FOO_MAKE_OPT, generic packages
were typically using FOO_MAKE_OPTS. This inconsistency becomes a problem
when a new infrastructure is introduced that wants to make use of
FOO_MAKE_OPT(S), and can live alongside either generic-package or
autotools-package. The new infrastructure will have to choose between either
OPT or OPTS, and thus rule out transparent usage by respectively generic
packages or generic packages. An example of such an infrastructure is
kconfig-package, which provides kconfig-related make targets.

The OPTS variant is more logical, as there are typically multiple options.

This patch renames all occurrences of FOO_MAKE_OPT in FOO_MAKE_OPTS.
Sed command used:
    find * -type f | xargs sed -i 's#_MAKE_OPT\>#&S#g'

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/at91bootstrap3/at91bootstrap3.mk

@@ -17,7 +17,7 @@ AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE = \
 AT91BOOTSTRAP3_CUSTOM_PATCH_DIR = \
 	$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_PATCH_DIR))
 
-AT91BOOTSTRAP3_MAKE_OPT = CROSS_COMPILE=$(TARGET_CROSS) DESTDIR=$(BINARIES_DIR)
+AT91BOOTSTRAP3_MAKE_OPTS = CROSS_COMPILE=$(TARGET_CROSS) DESTDIR=$(BINARIES_DIR)
 
 ifneq ($(AT91BOOTSTRAP3_CUSTOM_PATCH_DIR),)
 define AT91BOOTSTRAP3_APPLY_CUSTOM_PATCHES
@@ -41,7 +41,7 @@ define AT91BOOTSTRAP3_CONFIGURE_CMDS
 endef
 
 define AT91BOOTSTRAP3_BUILD_CMDS
-	$(MAKE) $(AT91BOOTSTRAP3_MAKE_OPT) -C $(@D) boot
+	$(MAKE) $(AT91BOOTSTRAP3_MAKE_OPTS) -C $(@D) boot
 endef
 
 define AT91BOOTSTRAP3_INSTALL_IMAGES_CMDS

docs/manual/adding-packages-autotools.txt

@@ -111,7 +111,7 @@ cases, typical packages will therefore only use a few of them.
   variables to pass to make in the build step. These are passed before
   the +make+ command. By default, empty.
 
-* +LIBFOO_MAKE_OPT+, to specify additional variables to
+* +LIBFOO_MAKE_OPTS+, to specify additional variables to
   pass to make in the build step. These are passed after the
   +make+ command. By default, empty.
 

docs/manual/adding-packages-cmake.txt

@@ -108,7 +108,7 @@ typical packages will therefore only use a few of them.
   pass to make in the build step. These are passed before the +make+
   command. By default, empty.
 
-* +LIBFOO_MAKE_OPT+, to specify additional variables to pass to make
+* +LIBFOO_MAKE_OPTS+, to specify additional variables to pass to make
   in the build step. These are passed after the +make+ command. By
   default, empty.
 

docs/manual/adding-packages-kconfig.txt

@@ -47,7 +47,7 @@ be set to suit the needs of the package under consideration:
   support, for example 'menuconfig xconfig'. By default, 'menuconfig'.
 
 * +FOO_KCONFIG_OPT+: extra options to pass when calling the kconfig
-  ediftors. This may need to include '$(FOO_MAKE_OPT)', for example. By
+  editors. This may need to include '$(FOO_MAKE_OPTS)', for example. By
   default, empty.
 
 * +FOO_KCONFIG_FIXUP_CMDS+: a list of shell commands needed to fixup the

package/avahi/avahi.mk

@@ -138,7 +138,7 @@ else
 AVAHI_CONF_OPT += --disable-python
 endif
 
-AVAHI_MAKE_OPT += $(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),LIBS=-lintl)
+AVAHI_MAKE_OPTS += $(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),LIBS=-lintl)
 
 define AVAHI_USERS
 	avahi -1 avahi -1 * - - -

package/dnsmasq/dnsmasq.mk

@@ -8,8 +8,8 @@ DNSMASQ_VERSION = 2.72
 DNSMASQ_SOURCE = dnsmasq-$(DNSMASQ_VERSION).tar.xz
 DNSMASQ_SITE = http://thekelleys.org.uk/dnsmasq
 DNSMASQ_MAKE_ENV = $(TARGET_MAKE_ENV) CC="$(TARGET_CC)"
-DNSMASQ_MAKE_OPT = COPTS="$(DNSMASQ_COPTS)" PREFIX=/usr CFLAGS="$(TARGET_CFLAGS)"
-DNSMASQ_MAKE_OPT += DESTDIR=$(TARGET_DIR) LDFLAGS="$(TARGET_LDFLAGS)"
+DNSMASQ_MAKE_OPTS = COPTS="$(DNSMASQ_COPTS)" PREFIX=/usr CFLAGS="$(TARGET_CFLAGS)"
+DNSMASQ_MAKE_OPTS += DESTDIR=$(TARGET_DIR) LDFLAGS="$(TARGET_LDFLAGS)"
 DNSMASQ_DEPENDENCIES = host-pkgconf
 DNSMASQ_LICENSE = Dual GPLv2/GPLv3
 DNSMASQ_LICENSE_FILES = COPYING COPYING-v3
@@ -37,7 +37,7 @@ endif
 # NLS requires IDN so only enable it (i18n) when IDN is true
 ifeq ($(BR2_PACKAGE_DNSMASQ_IDN),y)
 	DNSMASQ_DEPENDENCIES += libidn $(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),gettext) host-gettext
-	DNSMASQ_MAKE_OPT += LIBS+="$(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),-lintl)"
+	DNSMASQ_MAKE_OPTS += LIBS+="$(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),-lintl)"
 	DNSMASQ_COPTS += -DHAVE_IDN
 	DNSMASQ_I18N = $(if $(BR2_ENABLE_LOCALE),-i18n)
 endif
@@ -58,7 +58,7 @@ ifeq ($(BR2_PACKAGE_DNSMASQ_LUA),y)
 
 # liblua uses dlopen when dynamically linked
 ifneq ($(BR2_PREFER_STATIC_LIB),y)
-	DNSMASQ_MAKE_OPT += LIBS+="-ldl"
+	DNSMASQ_MAKE_OPTS += LIBS+="-ldl"
 endif
 
 define DNSMASQ_ENABLE_LUA
@@ -98,11 +98,11 @@ define DNSMASQ_BUILD_CMDS
 	$(DNSMASQ_ENABLE_DBUS)
 	$(DNSMASQ_ENABLE_LUA)
 	$(DNSMASQ_ENABLE_CONNTRACK)
-	$(DNSMASQ_MAKE_ENV) $(MAKE1) -C $(@D) $(DNSMASQ_MAKE_OPT) all$(DNSMASQ_I18N)
+	$(DNSMASQ_MAKE_ENV) $(MAKE1) -C $(@D) $(DNSMASQ_MAKE_OPTS) all$(DNSMASQ_I18N)
 endef
 
 define DNSMASQ_INSTALL_TARGET_CMDS
-	$(DNSMASQ_MAKE_ENV) $(MAKE) -C $(@D) $(DNSMASQ_MAKE_OPT) install$(DNSMASQ_I18N)
+	$(DNSMASQ_MAKE_ENV) $(MAKE) -C $(@D) $(DNSMASQ_MAKE_OPTS) install$(DNSMASQ_I18N)
 	mkdir -p $(TARGET_DIR)/var/lib/misc/
 endef
 

package/e2fsprogs/e2fsprogs.mk

@@ -31,7 +31,7 @@ endif
 
 E2FSPROGS_DEPENDENCIES = host-pkgconf util-linux
 
-E2FSPROGS_MAKE_OPT = \
+E2FSPROGS_MAKE_OPTS = \
 	LDCONFIG=true
 
 define HOST_E2FSPROGS_INSTALL_CMDS

package/faifa/faifa.mk

@@ -11,7 +11,7 @@ FAIFA_DEPENDENCIES = libpcap host-autoconf
 FAIFA_LICENSE = BSD-3c
 FAIFA_LICENSE_FILES = COPYING
 
-FAIFA_MAKE_OPT += GIT_REV=$(FAIFA_VERSION)
+FAIFA_MAKE_OPTS += GIT_REV=$(FAIFA_VERSION)
 
 # This package uses autoconf, but not automake, so we need to call
 # their special autogen.sh script, and have custom target and staging

package/freetype/freetype.mk

@@ -8,7 +8,7 @@ FREETYPE_VERSION = 2.5.3
 FREETYPE_SOURCE = freetype-$(FREETYPE_VERSION).tar.bz2
 FREETYPE_SITE = http://downloads.sourceforge.net/project/freetype/freetype2/$(FREETYPE_VERSION)
 FREETYPE_INSTALL_STAGING = YES
-FREETYPE_MAKE_OPT = CCexe="$(HOSTCC)"
+FREETYPE_MAKE_OPTS = CCexe="$(HOSTCC)"
 FREETYPE_LICENSE = Dual FTL/GPLv2+
 FREETYPE_LICENSE_FILES = docs/FTL.TXT docs/GPLv2.TXT
 FREETYPE_DEPENDENCIES = host-pkgconf

package/gcc/gcc-initial/gcc-initial.mk

@@ -53,7 +53,7 @@ HOST_GCC_INITIAL_CONF_ENV = \
 # We need to tell gcc that the C library will be providing the ssp
 # support, as it can't guess it since the C library hasn't been built
 # yet (we're gcc-initial).
-HOST_GCC_INITIAL_MAKE_OPT = $(if $(BR2_TOOLCHAIN_HAS_SSP),gcc_cv_libc_provides_ssp=yes) all-gcc all-target-libgcc
+HOST_GCC_INITIAL_MAKE_OPTS = $(if $(BR2_TOOLCHAIN_HAS_SSP),gcc_cv_libc_provides_ssp=yes) all-gcc all-target-libgcc
 HOST_GCC_INITIAL_INSTALL_OPT = install-gcc install-target-libgcc
 
 $(eval $(host-autotools-package))

package/httping/httping.mk

@@ -18,19 +18,19 @@ HTTPING_DEPENDENCIES = host-gettext \
 	$(if $(BR2_PACKAGE_NCURSES_WCHAR),ncurses) \
 	$(if $(BR2_PACKAGE_OPENSSL),openssl) \
 	$(if $(BR2_PACKAGE_FFTW),fftw)
-HTTPING_MAKE_OPT = $(TARGET_CONFIGURE_OPTS) \
+HTTPING_MAKE_OPTS = $(TARGET_CONFIGURE_OPTS) \
 	FW=$(if $(BR2_PACKAGE_FFTW),yes,no) \
 	NC=$(if $(BR2_PACKAGE_NCURSES_WCHAR),yes,no) \
 	SSL=$(if $(BR2_PACKAGE_OPENSSL),yes,no) \
 	TFO=$(if $(BR2_PACKAGE_HTTPING_TFO),yes,no)
 
 define HTTPING_BUILD_CMDS
-	$(HTTPING_MAKE_OPT) LDFLAGS="$(HTTPING_LDFLAGS)" \
+	$(HTTPING_MAKE_OPTS) LDFLAGS="$(HTTPING_LDFLAGS)" \
 		$(MAKE) DEBUG=no -C $(@D)
 endef
 
 define HTTPING_INSTALL_TARGET_CMDS
-	$(HTTPING_MAKE_OPT) $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) install
+	$(HTTPING_MAKE_OPTS) $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) install
 endef
 
 $(eval $(generic-package))

package/ipsec-tools/ipsec-tools.mk

@@ -13,7 +13,7 @@ IPSEC_TOOLS_MAKE = $(MAKE1)
 IPSEC_TOOLS_DEPENDENCIES = openssl flex host-flex
 
 # configure hardcodes -Werror, so override CFLAGS on make invocation
-IPSEC_TOOLS_MAKE_OPT = CFLAGS='$(TARGET_CFLAGS)'
+IPSEC_TOOLS_MAKE_OPTS = CFLAGS='$(TARGET_CFLAGS)'
 
 # openssl uses zlib, so we need to explicitly link with it when static
 ifeq ($(BR2_PREFER_STATIC_LIB),y)

package/iputils/iputils.mk

@@ -18,7 +18,7 @@ IPUTILS_DEPENDENCIES += busybox
 endif
 
 # Disabling CAP_SETPCAP (file capabilities)
-IPUTILS_MAKE_OPT = $(TARGET_CONFIGURE_OPTS) USE_CAP=no USE_SYSFS=no\
+IPUTILS_MAKE_OPTS = $(TARGET_CONFIGURE_OPTS) USE_CAP=no USE_SYSFS=no\
 	CFLAGS="$(TARGET_CFLAGS) -D_GNU_SOURCE" \
 	arping clockdiff ping rarpd rdisc tftpd tracepath
 
@@ -26,7 +26,7 @@ ifeq ($(BR2_INET_IPV6),y)
 # To support md5 for ping6
 IPUTILS_DEPENDENCIES += openssl
 
-IPUTILS_MAKE_OPT += ping6 tracepath6 traceroute6
+IPUTILS_MAKE_OPTS += ping6 tracepath6 traceroute6
 
 define IPUTILS_IPV6_INSTALL_TARGET_CMDS
 	$(INSTALL) -D -m 755 $(@D)/ping6       $(TARGET_DIR)/bin/ping6
@@ -36,7 +36,7 @@ endef
 endif
 
 define IPUTILS_BUILD_CMDS
-	$(MAKE) -C $(@D) $(IPUTILS_MAKE_OPT)
+	$(MAKE) -C $(@D) $(IPUTILS_MAKE_OPTS)
 endef
 
 define IPUTILS_INSTALL_TARGET_CMDS

package/iw/iw.mk

@@ -10,18 +10,18 @@ IW_SITE = $(BR2_KERNEL_MIRROR)/software/network/iw
 IW_LICENSE = iw license
 IW_LICENSE_FILES = COPYING
 IW_DEPENDENCIES = host-pkgconf libnl
-IW_MAKE_OPT = CC="$(TARGET_CC)" LD="$(TARGET_LD)" LDFLAGS="$(TARGET_LDFLAGS)"
+IW_MAKE_OPTS = CC="$(TARGET_CC)" LD="$(TARGET_LD)" LDFLAGS="$(TARGET_LDFLAGS)"
 IW_MAKE_ENV = PKG_CONFIG="$(HOST_DIR)/usr/bin/pkg-config" \
 	GIT_DIR=$(IW_DIR)
 
 ifeq ($(BR2_PREFER_STATIC_LIB),y)
 # libnl needs pthread/m, so we need to explicitly with them when static
 # these need to added AFTER libnl, so we have to override LIBS completely
-IW_MAKE_OPT += LIBS='-lnl-genl-3 -lnl-3 -lpthread -lm'
+IW_MAKE_OPTS += LIBS='-lnl-genl-3 -lnl-3 -lpthread -lm'
 endif
 
 define IW_BUILD_CMDS
-	$(IW_MAKE_ENV) $(MAKE) $(IW_MAKE_OPT) -C $(@D)
+	$(IW_MAKE_ENV) $(MAKE) $(IW_MAKE_OPTS) -C $(@D)
 endef
 
 define IW_INSTALL_TARGET_CMDS

package/libdnet/libdnet.mk

@@ -17,9 +17,9 @@ LIBDNET_CONF_OPT = \
 ifneq ($(BR2_PACKAGE_LIBDNET_PYTHON),)
 LIBDNET_DEPENDENCIES = python
 LIBDNET_CONF_OPT += --with-python
-LIBDNET_MAKE_OPT = PYINCDIR=$(STAGING_DIR)/usr/include/python$(PYTHON_VERSION_MAJOR) PYLIBDIR=$(STAGING_DIR)/usr/lib
-LIBDNET_INSTALL_TARGET_OPT = $(LIBDNET_MAKE_OPT) DESTDIR=$(TARGET_DIR) INSTALL_STRIP_FLAG=-s install-exec
-LIBDNET_INSTALL_STAGING_OPT = $(LIBDNET_MAKE_OPT) DESTDIR=$(STAGING_DIR) install
+LIBDNET_MAKE_OPTS = PYINCDIR=$(STAGING_DIR)/usr/include/python$(PYTHON_VERSION_MAJOR) PYLIBDIR=$(STAGING_DIR)/usr/lib
+LIBDNET_INSTALL_TARGET_OPT = $(LIBDNET_MAKE_OPTS) DESTDIR=$(TARGET_DIR) INSTALL_STRIP_FLAG=-s install-exec
+LIBDNET_INSTALL_STAGING_OPT = $(LIBDNET_MAKE_OPTS) DESTDIR=$(STAGING_DIR) install
 endif
 
 # Needed for autoreconf to work properly

package/libjson/libjson.mk

@@ -14,13 +14,13 @@ LIBJSON_LICENSE_FILES = License.txt
 LIBJSON_CXXFLAGS = $(TARGET_CFLAGS) -DNDEBUG
 
 ifeq ($(BR2_PREFER_STATIC_LIB),y)
-LIBJSON_MAKE_OPT += SHARED=0
+LIBJSON_MAKE_OPTS += SHARED=0
 else
-LIBJSON_MAKE_OPT += SHARED=1
+LIBJSON_MAKE_OPTS += SHARED=1
 LIBJSON_CXXFLAGS += -fPIC
 endif
 
-LIBJSON_MAKE_OPT += BUILD_TYPE= CXXFLAGS="$(LIBJSON_CXXFLAGS)"
+LIBJSON_MAKE_OPTS += BUILD_TYPE= CXXFLAGS="$(LIBJSON_CXXFLAGS)"
 
 define LIBJSON_EXTRACT_CMDS
 	unzip -d $(@D) $(DL_DIR)/$(LIBJSON_SOURCE)
@@ -33,17 +33,17 @@ define LIBJSON_BUILD_CMDS
 	mkdir -p $(@D)/Objects_$(if $(BR2_PREFER_STATIC_LIB),static,shared) \
 		$(@D)/_internal/Source/Dependencies
 	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
-		$(LIBJSON_MAKE_OPT) -C $(@D)
+		$(LIBJSON_MAKE_OPTS) -C $(@D)
 endef
 
 define LIBJSON_INSTALL_TARGET_CMDS
 	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
-		$(LIBJSON_MAKE_OPT) prefix=$(TARGET_DIR)/usr install -C $(@D)
+		$(LIBJSON_MAKE_OPTS) prefix=$(TARGET_DIR)/usr install -C $(@D)
 endef
 
 define LIBJSON_INSTALL_STAGING_CMDS
 	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
-		$(LIBJSON_MAKE_OPT) prefix=$(STAGING_DIR)/usr install -C $(@D)
+		$(LIBJSON_MAKE_OPTS) prefix=$(STAGING_DIR)/usr install -C $(@D)
 endef
 
 $(eval $(generic-package))

package/libseccomp/libseccomp.mk

@@ -13,7 +13,7 @@ LIBSECCOMP_INSTALL_STAGING = YES
 # Needed for configure to find our system headers:
 LIBSECCOMP_CONF_ENV            = SYSROOT=$(STAGING_DIR)
 LIBSECCOMP_MAKE_ENV            = $(TARGET_CONFIGURE_OPTS)
-LIBSECCOMP_MAKE_OPT            = SUBDIRS_BUILD=src
+LIBSECCOMP_MAKE_OPTS            = SUBDIRS_BUILD=src
 LIBSECCOMP_INSTALL_STAGING_OPT = SUBDIRS_BUILD=src SUBDIRS_INSTALL="src include" DESTDIR=$(STAGING_DIR) install
 LIBSECCOMP_INSTALL_TARGET_OPT  = SUBDIRS_BUILD=src SUBDIRS_INSTALL="src include" DESTDIR=$(TARGET_DIR) install
 

package/linux-pam/linux-pam.mk

@@ -23,7 +23,7 @@ LINUX_PAM_LICENSE_FILES = Copyright
 
 ifeq ($(BR2_NEEDS_GETTEXT_IF_LOCALE),y)
 	LINUX_PAM_DEPENDENCIES += gettext
-	LINUX_PAM_MAKE_OPT += LIBS=-lintl
+	LINUX_PAM_MAKE_OPTS += LIBS=-lintl
 endif
 
 # Install default pam config (deny everything)

package/lm-sensors/lm-sensors.mk

@@ -20,28 +20,28 @@ LM_SENSORS_BINS_$(BR2_PACKAGE_LM_SENSORS_ISASET) += sbin/isaset
 LM_SENSORS_BINS_$(BR2_PACKAGE_LM_SENSORS_PWMCONFIG) += sbin/pwmconfig
 LM_SENSORS_BINS_$(BR2_PACKAGE_LM_SENSORS_SENSORS_DETECT) += sbin/sensors-detect
 
-LM_SENSORS_MAKE_OPT = \
+LM_SENSORS_MAKE_OPTS = \
 	BUILD_STATIC_LIB=1 \
 	MACHINE=$(KERNEL_ARCH) \
 	PREFIX=/usr
 
 ifeq ($(BR2_PREFER_STATIC_LIB),y)
-LM_SENSORS_MAKE_OPT += BUILD_SHARED_LIB=0
+LM_SENSORS_MAKE_OPTS += BUILD_SHARED_LIB=0
 else
-LM_SENSORS_MAKE_OPT += BUILD_SHARED_LIB=1
+LM_SENSORS_MAKE_OPTS += BUILD_SHARED_LIB=1
 endif
 
 define LM_SENSORS_BUILD_CMDS
-	$(MAKE) $(TARGET_CONFIGURE_OPTS) $(LM_SENSORS_MAKE_OPT) -C $(@D)
+	$(MAKE) $(TARGET_CONFIGURE_OPTS) $(LM_SENSORS_MAKE_OPTS) -C $(@D)
 endef
 
 define LM_SENSORS_INSTALL_STAGING_CMDS
-	$(MAKE) -C $(@D) $(LM_SENSORS_MAKE_OPT) DESTDIR=$(STAGING_DIR) install
+	$(MAKE) -C $(@D) $(LM_SENSORS_MAKE_OPTS) DESTDIR=$(STAGING_DIR) install
 	rm -f $(addprefix $(STAGING_DIR)/usr/,$(LM_SENSORS_BINS_) $(LM_SENSORS_BINS_y))
 endef
 
 define LM_SENSORS_INSTALL_TARGET_CMDS
-	$(MAKE) -C $(@D) $(LM_SENSORS_MAKE_OPT) DESTDIR=$(TARGET_DIR) install
+	$(MAKE) -C $(@D) $(LM_SENSORS_MAKE_OPTS) DESTDIR=$(TARGET_DIR) install
 	rm -f $(addprefix $(TARGET_DIR)/usr/,$(LM_SENSORS_BINS_))
 endef
 

package/lshw/lshw.mk

@@ -14,18 +14,18 @@ ifeq ($(BR2_ENABLE_LOCALE),)
 LSHW_CFLAGS += -DNONLS
 endif
 
-LSHW_MAKE_OPT = CC="$(TARGET_CC)" CXX="$(TARGET_CXX)" AR="$(TARGET_AR)" \
+LSHW_MAKE_OPTS = CC="$(TARGET_CC)" CXX="$(TARGET_CXX)" AR="$(TARGET_AR)" \
 	RPM_OPT_FLAGS="$(LSHW_CFLAGS)" all
 LSHW_MAKE_ENV = LIBS="$(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),-lintl)"
 LSHW_DEPENDENCIES = $(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),gettext)
 
 define LSHW_BUILD_CMDS
-	$(LSHW_MAKE_ENV) $(MAKE) -C $(@D)/src $(LSHW_MAKE_OPT)
+	$(LSHW_MAKE_ENV) $(MAKE) -C $(@D)/src $(LSHW_MAKE_OPTS)
 endef
 
 define LSHW_INSTALL_TARGET_CMDS
 	$(LSHW_MAKE_ENV) $(MAKE) -C $(@D)/src DESTDIR=$(TARGET_DIR) \
-		$(LSHW_MAKE_OPT) install
+		$(LSHW_MAKE_OPTS) install
 endef
 
 $(eval $(generic-package))

package/lvm2/lvm2.mk

@@ -32,7 +32,7 @@ LVM2_CONF_OPT += --disable-readline
 endif
 
 ifeq ($(BR2_PACKAGE_LVM2_STANDARD_INSTALL),)
-LVM2_MAKE_OPT = device-mapper
+LVM2_MAKE_OPTS = device-mapper
 LVM2_INSTALL_STAGING_OPT = DESTDIR=$(STAGING_DIR) install_device-mapper
 LVM2_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install_device-mapper
 endif

package/mdadm/mdadm.mk

@@ -10,7 +10,7 @@ MDADM_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/raid/mdadm
 MDADM_LICENSE = GPLv2+
 MDADM_LICENSE_FILES = COPYING
 
-MDADM_MAKE_OPT = \
+MDADM_MAKE_OPTS = \
 	CFLAGS="$(TARGET_CFLAGS)" CC="$(TARGET_CC)" CHECK_RUN_DIR=0 -C $(MDADM_DIR) mdadm
 
 MDADM_INSTALL_TARGET_OPT = \

package/mii-diag/mii-diag.mk

@@ -11,7 +11,7 @@ MII_DIAG_SITE    = $(BR2_DEBIAN_MIRROR)/debian/pool/main/m/mii-diag
 MII_DIAG_LICENSE = GPL # No version specified
 MII_DIAG_LICENSE_FILES = mii-diag.c
 
-MII_DIAG_MAKE_OPT = $(TARGET_CONFIGURE_OPTS)
+MII_DIAG_MAKE_OPTS = $(TARGET_CONFIGURE_OPTS)
 
 define MII_DIAG_DEBIAN_PATCHES
 	if [ -d $(@D)/debian/patches ]; then \
@@ -22,7 +22,7 @@ endef
 MII_DIAG_POST_PATCH_HOOKS = MII_DIAG_DEBIAN_PATCHES
 
 define MII_DIAG_BUILD_CMDS
-	$(MAKE) $(MII_DIAG_MAKE_OPT) -C $(@D) mii-diag
+	$(MAKE) $(MII_DIAG_MAKE_OPTS) -C $(@D) mii-diag
 endef
 
 define MII_DIAG_INSTALL_TARGET_CMDS

package/mpfr/mpfr.mk

@@ -11,7 +11,7 @@ MPFR_LICENSE = LGPLv3+
 MPFR_LICENSE_FILES = COPYING.LESSER
 MPFR_INSTALL_STAGING = YES
 MPFR_DEPENDENCIES = gmp
-MPFR_MAKE_OPT = RANLIB=$(TARGET_RANLIB)
+MPFR_MAKE_OPTS = RANLIB=$(TARGET_RANLIB)
 
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))

package/openswan/openswan.mk

@@ -10,31 +10,31 @@ OPENSWAN_LICENSE = GPLv2+, BSD-3c
 OPENSWAN_LICENSE_FILES = COPYING LICENSE
 
 OPENSWAN_DEPENDENCIES = host-bison host-flex gmp iproute2
-OPENSWAN_MAKE_OPT = ARCH=$(BR2_ARCH) CC="$(TARGET_CC)" \
+OPENSWAN_MAKE_OPTS = ARCH=$(BR2_ARCH) CC="$(TARGET_CC)" \
 	USERCOMPILE="$(TARGET_CFLAGS) -fPIE" INC_USRLOCAL=/usr \
 	USE_KLIPS=false USE_MAST=false USE_NM=false
 
 ifeq ($(BR2_PACKAGE_LIBCURL),y)
 	OPENSWAN_DEPENDENCIES += libcurl
-	OPENSWAN_MAKE_OPT += USE_LIBCURL=true
+	OPENSWAN_MAKE_OPTS += USE_LIBCURL=true
 endif
 
 ifeq ($(BR2_PACKAGE_OPENSSL),y)
 	OPENSWAN_DEPENDENCIES += openssl
-	OPENSWAN_MAKE_OPT += HAVE_OPENSSL=true
+	OPENSWAN_MAKE_OPTS += HAVE_OPENSSL=true
 ifeq ($(BR2_PACKAGE_OCF_LINUX),y)
-	OPENSWAN_MAKE_OPT += HAVE_OCF=true
+	OPENSWAN_MAKE_OPTS += HAVE_OCF=true
 endif
 endif
 
 define OPENSWAN_BUILD_CMDS
 	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
-		$(OPENSWAN_MAKE_OPT) programs
+		$(OPENSWAN_MAKE_OPTS) programs
 endef
 
 define OPENSWAN_INSTALL_TARGET_CMDS
 	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
-		$(OPENSWAN_MAKE_OPT) DESTDIR=$(TARGET_DIR) install
+		$(OPENSWAN_MAKE_OPTS) DESTDIR=$(TARGET_DIR) install
 endef
 
 $(eval $(generic-package))

package/openvmtools/openvmtools.mk

@@ -41,7 +41,7 @@ endif
 
 ifeq ($(BR2_PACKAGE_OPENVMTOOLS_PAM),y)
 OPENVMTOOLS_CONF_OPT += --with-pam
-OPENVMTOOLS_MAKE_OPT += CFLAGS+="-Wno-unused-local-typedefs"
+OPENVMTOOLS_MAKE_OPTS += CFLAGS+="-Wno-unused-local-typedefs"
 OPENVMTOOLS_DEPENDENCIES += linux-pam
 else
 OPENVMTOOLS_CONF_OPT += --without-pam

package/pkg-autotools.mk

@@ -106,7 +106,7 @@ endif
 $(2)_CONF_ENV			?=
 $(2)_CONF_OPT			?=
 $(2)_MAKE_ENV			?=
-$(2)_MAKE_OPT			?=
+$(2)_MAKE_OPTS			?=
 $(2)_INSTALL_OPT                ?= install
 $(2)_INSTALL_STAGING_OPT	?= DESTDIR=$$(STAGING_DIR) install
 $(2)_INSTALL_TARGET_OPT		?= DESTDIR=$$(TARGET_DIR)  install
@@ -270,11 +270,11 @@ endif
 ifndef $(2)_BUILD_CMDS
 ifeq ($(4),target)
 define $(2)_BUILD_CMDS
-	$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) -C $$($$(PKG)_SRCDIR)
+	$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPTS) -C $$($$(PKG)_SRCDIR)
 endef
 else
 define $(2)_BUILD_CMDS
-	$$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) -C $$($$(PKG)_SRCDIR)
+	$$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPTS) -C $$($$(PKG)_SRCDIR)
 endef
 endif
 endif

package/pkg-cmake.mk

@@ -40,7 +40,7 @@ $(2)_CONF_ENV			?=
 $(2)_CONF_OPT			?=
 $(2)_MAKE			?= $$(MAKE)
 $(2)_MAKE_ENV			?=
-$(2)_MAKE_OPT			?=
+$(2)_MAKE_OPTS			?=
 $(2)_INSTALL_HOST_OPT		?= install
 $(2)_INSTALL_STAGING_OPT	?= DESTDIR=$$(STAGING_DIR) install
 $(2)_INSTALL_TARGET_OPT		?= DESTDIR=$$(TARGET_DIR) install
@@ -111,11 +111,11 @@ $(2)_DEPENDENCIES += host-cmake
 ifndef $(2)_BUILD_CMDS
 ifeq ($(4),target)
 define $(2)_BUILD_CMDS
-	$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) -C $$($$(PKG)_BUILDDIR)
+	$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPTS) -C $$($$(PKG)_BUILDDIR)
 endef
 else
 define $(2)_BUILD_CMDS
-	$$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) -C $$($$(PKG)_BUILDDIR)
+	$$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPTS) -C $$($$(PKG)_BUILDDIR)
 endef
 endif
 endif
@@ -126,7 +126,7 @@ endif
 #
 ifndef $(2)_INSTALL_CMDS
 define $(2)_INSTALL_CMDS
-	$$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) $$($$(PKG)_INSTALL_HOST_OPT) -C $$($$(PKG)_BUILDDIR)
+	$$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPTS) $$($$(PKG)_INSTALL_HOST_OPT) -C $$($$(PKG)_BUILDDIR)
 endef
 endif
 
@@ -136,7 +136,7 @@ endif
 #
 ifndef $(2)_INSTALL_STAGING_CMDS
 define $(2)_INSTALL_STAGING_CMDS
-	$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) $$($$(PKG)_INSTALL_STAGING_OPT) -C $$($$(PKG)_BUILDDIR)
+	$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPTS) $$($$(PKG)_INSTALL_STAGING_OPT) -C $$($$(PKG)_BUILDDIR)
 endef
 endif
 
@@ -146,7 +146,7 @@ endif
 #
 ifndef $(2)_INSTALL_TARGET_CMDS
 define $(2)_INSTALL_TARGET_CMDS
-	$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) $$($$(PKG)_INSTALL_TARGET_OPT) -C $$($$(PKG)_BUILDDIR)
+	$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPTS) $$($$(PKG)_INSTALL_TARGET_OPT) -C $$($$(PKG)_BUILDDIR)
 endef
 endif
 

package/pppd/pppd.mk

@@ -19,11 +19,11 @@ PPPD_RADIUS_CONF = dictionary dictionary.ascend dictionary.compat \
 
 ifeq ($(BR2_PACKAGE_PPPD_FILTER),y)
 	PPPD_DEPENDENCIES += libpcap
-	PPPD_MAKE_OPT += FILTER=y
+	PPPD_MAKE_OPTS += FILTER=y
 endif
 
 ifeq ($(BR2_INET_IPV6),y)
-	PPPD_MAKE_OPT += HAVE_INET6=y
+	PPPD_MAKE_OPTS += HAVE_INET6=y
 endif
 
 # pppd bundles some but not all of the needed kernel headers. The embedded
@@ -43,7 +43,7 @@ endef
 
 define PPPD_BUILD_CMDS
 	$(MAKE) CC="$(TARGET_CC)" COPTS="$(TARGET_CFLAGS)" \
-		-C $(@D) $(PPPD_MAKE_OPT)
+		-C $(@D) $(PPPD_MAKE_OPTS)
 endef
 
 ifeq ($(BR2_PACKAGE_PPPD_RADIUS),y)
@@ -94,7 +94,7 @@ define PPPD_INSTALL_TARGET_CMDS
 endef
 
 define PPPD_INSTALL_STAGING_CMDS
-	$(MAKE) INSTROOT=$(STAGING_DIR)/ -C $(@D) $(PPPD_MAKE_OPT) install-devel
+	$(MAKE) INSTROOT=$(STAGING_DIR)/ -C $(@D) $(PPPD_MAKE_OPTS) install-devel
 endef
 
 $(eval $(generic-package))

package/pv/pv.mk

@@ -23,7 +23,7 @@ PV_DEPENDENCIES = $(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),gettext host-gettext)
 # configuration, as the ld default emulation may not necessarily be
 # the correct one. By passing the below values for LD and LDFLAGS, we
 # ensure that 'gcc' is used to do these partial linking steps.
-PV_MAKE_OPT = \
+PV_MAKE_OPTS = \
 	LD="$(TARGET_CC)" \
 	LDFLAGS="-Wl,-r -nostdlib"
 

package/quota/quota.mk

@@ -24,7 +24,7 @@ QUOTA_CFLAGS += -I$(STAGING_DIR)/usr/include/tirpc/
 QUOTA_LDFLAGS += -ltirpc
 endif
 
-QUOTA_MAKE_OPT = $(TARGET_CONFIGURE_OPTS) CFLAGS="$(QUOTA_CFLAGS) -D_GNU_SOURCE" LDFLAGS="$(QUOTA_LDFLAGS)"
+QUOTA_MAKE_OPTS = $(TARGET_CONFIGURE_OPTS) CFLAGS="$(QUOTA_CFLAGS) -D_GNU_SOURCE" LDFLAGS="$(QUOTA_LDFLAGS)"
 QUOTA_CONF_ENV = \
 	CFLAGS="$(QUOTA_CFLAGS) -D_GNU_SOURCE" LDFLAGS="$(QUOTA_LDFLAGS)"
 

package/rp-pppoe/rp-pppoe.mk

@@ -11,7 +11,7 @@ RP_PPPOE_LICENSE_FILES = doc/LICENSE
 RP_PPPOE_DEPENDENCIES = pppd
 RP_PPPOE_SUBDIR = src
 RP_PPPOE_TARGET_FILES = pppoe pppoe-server pppoe-relay pppoe-sniff
-RP_PPPOE_MAKE_OPT = PLUGIN_DIR=/usr/lib/pppd/$(PPPD_VERSION)
+RP_PPPOE_MAKE_OPTS = PLUGIN_DIR=/usr/lib/pppd/$(PPPD_VERSION)
 RP_PPPOE_CONF_OPT = --disable-debugging
 RP_PPPOE_CONF_ENV = \
 	rpppoe_cv_pack_bitfields=normal \

package/rubix/rubix.mk

@@ -11,7 +11,7 @@ RUBIX_INSTALL_TARGET_OPT = GAMESDIR=$(TARGET_DIR)/usr/games install
 RUBIX_LICENSE = Public Domain
 RUBIX_LICENSE_FILES = LICENCE
 
-RUBIX_MAKE_OPT = CC="$(TARGET_CC)" XINC="-I$(STAGING_DIR)/usr/include/X11" XLIB="-L$(STAGING_DIR)/usr/lib -lX11"
+RUBIX_MAKE_OPTS = CC="$(TARGET_CC)" XINC="-I$(STAGING_DIR)/usr/include/X11" XLIB="-L$(STAGING_DIR)/usr/lib -lX11"
 
 RUBIX_DEPENDENCIES = xlib_libX11
 

package/schifra/schifra.mk

@@ -11,13 +11,13 @@ SCHIFRA_INSTALL_STAGING = YES
 SCHIFRA_LICENSE = schifra license
 SCHIFRA_LICENSE_FILES = schifra_license.txt
 
-SCHIFRA_MAKE_OPT = COMPILER="$(TARGET_CXX)" \
+SCHIFRA_MAKE_OPTS = COMPILER="$(TARGET_CXX)" \
 		   OPTIONS="$(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o"
 
 # The examples are the only buildable artefacts.
 ifeq ($(BR2_PACKAGE_SCHIFRA_EXAMPLES),y)
 define SCHIFRA_BUILD_CMDS
-	$(MAKE) -C $(@D) $(SCHIFRA_MAKE_OPT) all
+	$(MAKE) -C $(@D) $(SCHIFRA_MAKE_OPTS) all
 endef
 
 define SCHIFRA_INSTALL_EXAMPLES

package/sdl_ttf/sdl_ttf.mk

@@ -16,5 +16,5 @@ SDL_TTF_CONF_OPT = --without-x \
 		--with-freetype-prefix=$(STAGING_DIR)/usr \
 		--with-sdl-prefix=$(STAGING_DIR)/usr
 
-SDL_TTF_MAKE_OPT = INCLUDES="-I$(STAGING_DIR)/usr/include/SDL"  LDFLAGS="-L$(STAGING_DIR)/usr/lib"
+SDL_TTF_MAKE_OPTS = INCLUDES="-I$(STAGING_DIR)/usr/include/SDL"  LDFLAGS="-L$(STAGING_DIR)/usr/lib"
 $(eval $(autotools-package))

package/setserial/setserial.mk

@@ -11,7 +11,7 @@ SETSERIAL_SITE = http://snapshot.debian.org/archive/debian/20131001T214925Z/pool
 SETSERIAL_LICENSE = GPLv2
 SETSERIAL_LICENSE_FILES = debian/copyright
 # make all also builds setserial.cat which needs nroff
-SETSERIAL_MAKE_OPT = setserial
+SETSERIAL_MAKE_OPTS = setserial
 
 define SETSERIAL_APPLY_DEBIAN_PATCHES
 	# Touching gorhack.h is needed for the Debian patch 18 to work

package/speex/speex.mk

@@ -31,7 +31,7 @@ endef
 SPEEX_POST_CONFIGURE_HOOKS += SPEEX_LIBTOOL_FIXUP
 
 define SPEEX_BUILD_CMDS
-	$($(PKG)_MAKE_ENV) $(MAKE) $($(PKG)_MAKE_OPT) -C $(@D)/$($(PKG)_SUBDIR)
+	$($(PKG)_MAKE_ENV) $(MAKE) $($(PKG)_MAKE_OPTS) -C $(@D)/$($(PKG)_SUBDIR)
 endef
 
 $(eval $(autotools-package))

package/sysstat/sysstat.mk

@@ -14,7 +14,7 @@ SYSSTAT_LICENSE_FILES = COPYING
 
 ifeq ($(BR2_NEEDS_GETTEXT_IF_LOCALE),y)
 SYSSTAT_DEPENDENCIES += gettext
-SYSSTAT_MAKE_OPT += CFLAGS="$(TARGET_CFLAGS) -lintl"
+SYSSTAT_MAKE_OPTS += CFLAGS="$(TARGET_CFLAGS) -lintl"
 endif
 
 # The isag tool is a post processing script that depends on tcl/tk

package/systemd/systemd.mk

@@ -138,8 +138,8 @@ SYSTEMD_CONF_OPT += --disable-smack
 endif
 
 # mq_getattr needs -lrt
-SYSTEMD_MAKE_OPT += LIBS=-lrt
-SYSTEMD_MAKE_OPT += LDFLAGS+=-ldl
+SYSTEMD_MAKE_OPTS += LIBS=-lrt
+SYSTEMD_MAKE_OPTS += LDFLAGS+=-ldl
 
 define SYSTEMD_INSTALL_INIT_HOOK
 	ln -fs ../lib/systemd/systemd $(TARGET_DIR)/sbin/init

package/tn5250/tn5250.mk

@@ -6,7 +6,7 @@
 
 TN5250_VERSION = 0.17.4
 TN5250_SITE = http://downloads.sourceforge.net/project/tn5250/tn5250/$(TN5250_VERSION)
-TN5250_MAKE_OPT = CPPFLAGS=""
+TN5250_MAKE_OPTS = CPPFLAGS=""
 TN5250_DEPENDENCIES = ncurses
 TN5250_LICENSE = LGPLv2.1+
 TN5250_LICENSE_FILES = COPYING

package/util-linux/util-linux.mk

@@ -44,7 +44,7 @@ endif
 
 ifeq ($(BR2_NEEDS_GETTEXT_IF_LOCALE),y)
 UTIL_LINUX_DEPENDENCIES += gettext
-UTIL_LINUX_MAKE_OPT += LIBS=-lintl
+UTIL_LINUX_MAKE_OPTS += LIBS=-lintl
 endif
 
 ifeq ($(BR2_PACKAGE_LIBCAP_NG),y)

package/whois/whois.mk

@@ -10,7 +10,7 @@ WHOIS_SOURCE = whois_$(WHOIS_VERSION).tar.xz
 # take precedence over busybox implementation
 WHOIS_DEPENDENCIES = host-gettext $(if $(BR2_PACKAGE_BUSYBOX),busybox)
 WHOIS_MAKE_ENV = $(TARGET_MAKE_ENV)
-WHOIS_MAKE_OPT = CC="$(TARGET_CC)" CFLAGS="$(TARGET_CFLAGS)" \
+WHOIS_MAKE_OPTS = CC="$(TARGET_CC)" CFLAGS="$(TARGET_CFLAGS)" \
 	LIBS="$(WHOIS_EXTRA_LIBS)"
 WHOIS_LICENSE = GPLv2+
 WHOIS_LICENSE_FILES = COPYING
@@ -32,11 +32,11 @@ WHOIS_MAKE_ENV += HAVE_LIBIDN=1
 endif
 
 define WHOIS_BUILD_CMDS
-	$(WHOIS_MAKE_ENV) $(MAKE) $(WHOIS_MAKE_OPT) -C $(@D)
+	$(WHOIS_MAKE_ENV) $(MAKE) $(WHOIS_MAKE_OPTS) -C $(@D)
 endef
 
 define WHOIS_INSTALL_TARGET_CMDS
-	$(WHOIS_MAKE_ENV) $(MAKE) $(WHOIS_MAKE_OPT) \
+	$(WHOIS_MAKE_ENV) $(MAKE) $(WHOIS_MAKE_OPTS) \
 		BASEDIR="$(TARGET_DIR)" install -C $(@D)
 endef
 

package/xinetd/xinetd.mk

@@ -28,6 +28,6 @@ XINETD_CONF_ENV += \
 	CFLAGS="$(XINETD_CFLAGS)" \
 	LIBS="$(XINETD_LIBS)"
 
-XINETD_MAKE_OPT = AR="$(TARGET_AR)"
+XINETD_MAKE_OPTS = AR="$(TARGET_AR)"
 
 $(eval $(autotools-package))

package/zmqpp/zmqpp.mk

@@ -11,7 +11,7 @@ ZMQPP_DEPENDENCIES = zeromq
 ZMQPP_LICENSE = LGPLv3+ with exceptions
 ZMQPP_LICENSE_FILES = COPYING COPYING.LESSER
 
-ZMQPP_MAKE_OPT = LD="$(TARGET_CXX)" BUILD_PATH=./build PREFIX=/usr
+ZMQPP_MAKE_OPTS = LD="$(TARGET_CXX)" BUILD_PATH=./build PREFIX=/usr
 ZMQPP_LDFLAGS = $(TARGET_LDFLAGS) -lpthread
 
 ifeq ($(BR2_PACKAGE_ZMQPP_CLIENT),y)
@@ -21,19 +21,19 @@ endif
 define ZMQPP_BUILD_CMDS
 	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
 		LDFLAGS="$(ZMQPP_LDFLAGS)" \
-		$(ZMQPP_MAKE_OPT) $(if $(BR2_PACKAGE_ZMQPP_CLIENT),all) -C $(@D)
+		$(ZMQPP_MAKE_OPTS) $(if $(BR2_PACKAGE_ZMQPP_CLIENT),all) -C $(@D)
 endef
 
 define ZMQPP_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/include/zmqpp
 	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
-		$(ZMQPP_MAKE_OPT) DESTDIR=$(TARGET_DIR) install -C $(@D)
+		$(ZMQPP_MAKE_OPTS) DESTDIR=$(TARGET_DIR) install -C $(@D)
 endef
 
 define ZMQPP_INSTALL_STAGING_CMDS
 	$(INSTALL) -m 0755 -d $(STAGING_DIR)/usr/include/zmqpp
 	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
-		$(ZMQPP_MAKE_OPT) DESTDIR=$(STAGING_DIR) install -C $(@D)
+		$(ZMQPP_MAKE_OPTS) DESTDIR=$(STAGING_DIR) install -C $(@D)
 endef
 
 $(eval $(generic-package))

package/zxing/zxing.mk

@@ -17,7 +17,7 @@ ZXING_DEPENDENCIES += libiconv
 else
 # There is no locale support in the toolchain and libiconv
 # is not available so disable iconv support in zxing
-ZING_MAKE_OPT=CXXFLAGS+="-DNO_ICONV"
+ZING_MAKE_OPTS=CXXFLAGS+="-DNO_ICONV"
 endif
 endif
 
@@ -26,7 +26,7 @@ define ZXING_EXTRACT_CMDS
 endef
 
 define ZXING_BUILD_CMDS
-	$(MAKE) -C $(@D)/cpp/core/src $(TARGET_CONFIGURE_OPTS) $(ZING_MAKE_OPT)
+	$(MAKE) -C $(@D)/cpp/core/src $(TARGET_CONFIGURE_OPTS) $(ZING_MAKE_OPTS)
 endef
 
 define ZXING_INSTALL_STAGING_CMDS