Build 386-X für neues 4.3" Display speziell für VISADES

Entfernt:
directfb, tcl, protobuf, protobuf-c : werden nirgends verwendet
	und übersetzen aktuell nicht mehr

GfA-buildroot_VISADES_386_x.patch

@@ -0,0 +1,37 @@
+diff --git a/MakeIMAGE.sh b/MakeIMAGE.sh
+index c64a09d..0d7e058 100755
+--- a/MakeIMAGE.sh
++++ b/MakeIMAGE.sh
+@@ -4,6 +4,7 @@ SAVE_LC=$LC_ALL
+ export LC_ALL=C
+ 
+ BUILD=`cat ../GfA/board/GfA/Display001/BUILD`
++BUILD=$BUILD-1
+ IMAGEFILE=../Display001_Build_$BUILD-img
+ 
+ echo "Image: $IMAGEFILE"
+diff --git a/MakeRootfsUpdate.sh b/MakeRootfsUpdate.sh
+index df6e200..3662417 100755
+--- a/MakeRootfsUpdate.sh
++++ b/MakeRootfsUpdate.sh
+@@ -1,6 +1,7 @@
+ #!/bin/bash
+ WRKDIR=/tmp/XXXUpdateRootfs
+ BUILD=`cat ../GfA/board/GfA/Display001/BUILD`
++BUILD=$BUILD-1
+ UPDATE_BINARY=$WRKDIR/dest/UpdateRootfs.tar.Z
+ UPDATE_FILENAME="../UpdateDisplay001_$BUILD.sh"
+ UPDATE_IN_SCRIPT="UpdateRootfs.sh.in"
+diff --git a/UpdateRootfs.sh.in b/UpdateRootfs.sh.in
+index 81448e7..096013e 100644
+--- a/UpdateRootfs.sh.in
++++ b/UpdateRootfs.sh.in
+@@ -127,7 +127,7 @@ echo "XRES $XRES, YRES $YRES"
+ 
+ if [ "$XRES" == "480" -a "$YRES" == "272" ]; then
+   echo "4.3 Inch"
+-  sh /root/DisplayTo_4_3inch.sh
++  sh /root/DisplayTo_4_3inch_2020.sh
+   DONE=1
+ fi
+ 

MakeBuildrootEnv.sh

@@ -23,6 +23,7 @@ patch -p1 < ../GfA/GfA-buildroot-add-plugins-libraries-change-crosscompile-comma
 patch -p1 < ../GfA/GfA-buildroot-CrossCompile_export_CC_and_CXX.patch
 patch -p1 < ../GfA/GfA-buildroot_remove_CJK_Fonts_in_Update.patch
 patch -p1 < ../GfA/GfA-buildroot-libmodbus-GfA.patch
+patch -p1 < ../GfA/GfA-buildroot_VISADES_386_x.patch
 #
 chmod a+x *.sh
 cp ../GfA/configs/* ./configs

board/GfA/Display001/Display001.dts

@@ -111,12 +111,6 @@
                         >;
                 };
 
-                i2c_gpio_pins: pinmux_i2c_gpio_pins {
-                        pinctrl-single,pins = <
-                                0x150 (PIN_INPUT | MUX_MODE7)    /* spi0_sclk.i2c2_sda */
-                                0x154 (PIN_INPUT | MUX_MODE7)    /* spi0_d0.i2c2_scl */
-                        >;
-                };
 
                spi1_pins: pinmux_spi1_pins {
                         pinctrl-single,pins = <
@@ -202,12 +196,12 @@
 	};
 };
 
-/*
+
 &i2c2 {
     pinctrl-names = "default";
     pinctrl-0 = <&i2c2_pins>;
     status = "okay";
-    clock-frequency = <400000>;
+    clock-frequency = <350000>;
 };
 
 
@@ -222,35 +216,7 @@
                 reset-gpios = <&gpio3 21 1>;
         };
 };
-*/
 
-/ {
-i2c@3 {
-        compatible = "i2c-gpio";
-        pinctrl-names = "default";
-        pinctrl-0 = <&i2c_gpio_pins>;
-        status = "okay";
-
-        gpios = <&gpio0 2 0 /* sda */
-                 &gpio0 3 0 /* scl */
-                >;
-        /*i2c-gpio,sda-open-drain;
-        i2c-gpio,scl-open-drain;*/ 
-        i2c-gpio,delay-us = <1>;        /* ~200 kHz */
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        polytouch: edt-ft5x06@38 {
-                        compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
-                        reg = <0x38>;
-                        pinctrl-names = "default";
-                        pinctrl-0 = <&edt_ft5x06_pins>;
-                        interrupt-parent = <&gpio2>;
-                        interrupts = <1 0>;
-                        reset-gpios = <&gpio3 21 1>;
-                };
-        };
-};
 
 &spi1 {
 	pinctrl-names = "default";
@@ -273,27 +239,27 @@ i2c@3 {
 
 
 &lcdc {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&lcd_pins_default>;
-	pinctrl-1 = <&lcd_pins_sleep>;
-	status = "okay";
-	display-timings {
-		800x480 {
-			hactive         = <800>;
-			vactive         = <480>;
-			hback-porch     = <88>;
-			hfront-porch    = <40>;
-			hsync-len       = <128>;
-			vback-porch     = <33>;
-			vfront-porch    = <10>;
-			vsync-len       = <2>;
-			clock-frequency = <33000000>;
-			hsync-active    = <0>;
-			vsync-active    = <0>;
-			de-active	= <1>;
-			pixelclk-active = <0>;
-		};
-	};
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&lcd_pins_default>;
+        pinctrl-1 = <&lcd_pins_sleep>;
+        status = "okay";
+        display-timings {
+                480x272 {
+                        hactive         = <480>;
+                        vactive         = <272>;
+                        hback-porch     = <2>;
+                        hfront-porch    = <2>;
+                        hsync-len       = <41>;
+                        vback-porch     = <2>;
+                        vfront-porch    = <2>;
+                        vsync-len       = <10>;
+                        clock-frequency = <9000000>;
+                        hsync-active    = <0>;
+                        vsync-active    = <0>;
+                        de-active       = <0>;
+                        pixelclk-active = <0>;
+                };
+        };
 };
 
 /*
@@ -360,6 +326,6 @@ i2c@3 {
 / {
 	vendorinfo { 
 		vendor_name = "GfA Display001";
-		display_dtb = "Display001_7.dtb";
+		display_dtb = "Display001_4_2020.dtb";
 	};
 };

board/GfA/Display001/Display001_4_2020.dts

@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	ti,non-removable;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+		lcd_pins_default: lcd_pins_default {
+			pinctrl-single,pins = <
+				0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
+				0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
+				0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
+				0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
+				0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
+				0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
+				0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
+				0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
+				0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
+				0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
+				0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
+				0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
+				0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
+				0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
+				0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
+				0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
+				0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
+				0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
+				0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
+				0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
+				0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
+				0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
+				0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
+				0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
+				0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+				0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
+				0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
+				0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+			>;
+		};
+
+		lcd_pins_sleep: lcd_pins_sleep {
+			pinctrl-single,pins = <
+				0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data16 */
+				0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data17 */
+				0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data18 */
+				0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data19 */
+				0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data20 */
+				0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data21 */
+				0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data22 */
+				0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data23 */
+				0xa0 (PULL_DISABLE | MUX_MODE7)		/* lcd_data0.lcd_data0 */
+				0xa4 (PULL_DISABLE | MUX_MODE7)		/* lcd_data1.lcd_data1 */
+				0xa8 (PULL_DISABLE | MUX_MODE7)		/* lcd_data2.lcd_data2 */
+				0xac (PULL_DISABLE | MUX_MODE7)		/* lcd_data3.lcd_data3 */
+				0xb0 (PULL_DISABLE | MUX_MODE7)		/* lcd_data4.lcd_data4 */
+				0xb4 (PULL_DISABLE | MUX_MODE7)		/* lcd_data5.lcd_data5 */
+				0xb8 (PULL_DISABLE | MUX_MODE7)		/* lcd_data6.lcd_data6 */
+				0xbc (PULL_DISABLE | MUX_MODE7)		/* lcd_data7.lcd_data7 */
+				0xc0 (PULL_DISABLE | MUX_MODE7)		/* lcd_data8.lcd_data8 */
+				0xc4 (PULL_DISABLE | MUX_MODE7)		/* lcd_data9.lcd_data9 */
+				0xc8 (PULL_DISABLE | MUX_MODE7)		/* lcd_data10.lcd_data10 */
+				0xcc (PULL_DISABLE | MUX_MODE7)		/* lcd_data11.lcd_data11 */
+				0xd0 (PULL_DISABLE | MUX_MODE7)		/* lcd_data12.lcd_data12 */
+				0xd4 (PULL_DISABLE | MUX_MODE7)		/* lcd_data13.lcd_data13 */
+				0xd8 (PULL_DISABLE | MUX_MODE7)		/* lcd_data14.lcd_data14 */
+				0xdc (PULL_DISABLE | MUX_MODE7)		/* lcd_data15.lcd_data15 */
+				0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+				0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
+				0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
+				0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			>;
+		};
+
+
+             /* 	i2c1_pins: pinmux_i2c1_pins { 
+                        pinctrl-single,pins = <
+                                0x158 (PIN_INPUT | MUX_MODE2) */   /* spi0_d1.i2c1_sda */
+                              /*  0x15c (PIN_INPUT | MUX_MODE2) */    /* spi0_cs0.i2c1_scl */
+/*                        >;
+                };
+*/
+              	i2c2_pins: pinmux_i2c2_pins { 
+                        pinctrl-single,pins = <
+                                0x150 (PIN_INPUT_PULLUP | MUX_MODE2)    /* spi0_sclk.i2c2_sda */
+                                0x154 (PIN_INPUT_PULLUP | MUX_MODE2)    /* spi0_d0.i2c2_scl */
+                        >;
+                };
+
+
+               spi1_pins: pinmux_spi1_pins {
+                        pinctrl-single,pins = <
+                                0x190 (PIN_INPUT_PULLUP | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */
+                                0x194 (PIN_INPUT_PULLUP | MUX_MODE3)  /* mcasp0_fsx.spi1_d0 */
+                                0x198 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
+                                0x19c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcasp0_ahclrk.spi1_cs0 */
+                                0x164 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* ecap0_in.pwm0_out */
+                        >;
+                };
+
+
+		edt_ft5x06_pins: pinmux_edt_ft5x06_pins{
+                        pinctrl-single,pins = <
+                                0x1ac (PIN_OUTPUT | MUX_MODE7)    /* mcasp0_ahclkx.gpio3.21 RESET TOUCH P9_25*/
+                                0x8c  (PIN_INPUT | MUX_MODE7)    /* gpmc_clk_mux0.gpio2.1  INT TOUCH P8_18 */
+                        >;
+
+		};
+
+
+               uart4_pins_default: pinmux_uart4_pins_default {
+                        pinctrl-single,pins = <
+                                0x070 (PIN_INPUT_PULLUP | MUX_MODE6)    /* gpmc_wait0.uart4_rxd */
+                                0x074 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ 
+				0x078 (PIN_OUTPUT | MUX_MODE7)		/* gpmc_ben1.gpio1.28 */
+                        >;
+                };
+
+
+                uart4_pins_sleep: pinmux_uart4_pins_sleep {
+                        pinctrl-single,pins = <
+                                0x070 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                                0x074 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x078 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                        >;
+                };
+
+               uart1_pins_default: pinmux_uart1_pins_default {
+                        pinctrl-single,pins = <
+                                0x180 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart1_rxd.uart1_rxd */
+                                0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ 
+				0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda.uart1_ctsn */
+                                0x17c (PIN_OUTPUT | MUX_MODE0)  	/* i2c2_scl.uart1_rtsn */
+                        >;
+                };
+
+
+                uart1_pins_sleep: pinmux_uart1_pins_sleep {
+                        pinctrl-single,pins = <
+                                0x180 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* uart1_rxd.uart1_rxd */
+                                0x184 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */ 
+				0x178 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c2_sda.uart1_ctsn */
+                                0x17c (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* i2c2_scl.uart1_rtsn */
+                        >;
+                };
+
+		timer7_pins: pinmux_timer7_pins {
+                        pinctrl-single,pins = <
+                               0x094 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_oen_ren.timer7 */
+				>;
+				};
+
+		profibus_pins_default: pinmux_profibus_pins_default {
+                        pinctrl-single,pins = < 
+                        0x158 (PIN_INPUT_PULLUP | MUX_MODE4)    /* spi0_d1.uart0_rxd */
+                        0x15c (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* spi0_cs0.uart0_txd */ 
+			0x1a4 (PIN_OUTPUT | MUX_MODE5)		/* mcasp0_fsr.gpio3.19 */
+                	>;
+                };
+};
+
+&timer7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&timer7_pins>; 
+	status = "okay";
+};
+
+&i2c0 {
+	hdmi1: hdmi@70 {
+	      compatible = "nxp,tda998x";
+	      reg = <0x70>;
+	};
+};
+
+
+&i2c2 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&i2c2_pins>;
+    status = "okay";
+    clock-frequency = <350000>;
+};
+
+
+&i2c2 {
+        polytouch: edt-ft5x06@38 {
+                compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+                reg = <0x38>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&edt_ft5x06_pins>;
+                interrupt-parent = <&gpio2>;
+                interrupts = <1 0>;
+                reset-gpios = <&gpio3 21 1>;
+        };
+};
+
+
+&spi1 {
+	pinctrl-names = "default";
+        pinctrl-0 = <&spi1_pins>;
+
+	clock-frequency = <1000000>;
+        status = "okay";
+	spi1_0{
+		compatible = "spidev";
+                reg = <0>;
+		spi-max-frequency = <10000000>;
+        };
+
+	spi1_1{
+		compatible = "spidev";
+                reg = <1>;
+		spi-max-frequency = <10000000>;
+        };
+};
+
+
+&lcdc {
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&lcd_pins_default>;
+        pinctrl-1 = <&lcd_pins_sleep>;
+        status = "okay";
+        display-timings {
+                480x272 {
+                        hactive         = <480>;
+                        vactive         = <272>;
+                        hback-porch     = <2>;
+                        hfront-porch    = <2>;
+                        hsync-len       = <41>;
+                        vback-porch     = <2>;
+                        vfront-porch    = <2>;
+                        vsync-len       = <10>;
+                        clock-frequency = <9000000>;
+                        hsync-active    = <0>;
+                        vsync-active    = <0>;
+                        de-active       = <0>;
+                        pixelclk-active = <0>;
+                };
+        };
+};
+
+/*
+&tscadc {
+        status = "okay";
+        tsc {
+                ti,wires = <4>;
+                ti,x-plate-resistance = <200>;
+                ti,coordinate-readouts = <5>; 
+                ti,wire-config = <0x00 0x11 0x22 0x33>;
+        };
+};
+*/
+
+&tscadc {
+        status = "okay";
+};
+
+&am335x_adc {
+        ti,adc-channels = <0 1 2 3 4 5 6 7>;
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&uart4_pins_default>;
+        pinctrl-1 = <&uart4_pins_sleep>;
+
+        status = "okay";
+
+	rts-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rts-delay = <0 0 100>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+};
+
+&uart1 {
+	pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&uart1_pins_default>;
+        pinctrl-1 = <&uart1_pins_sleep>;
+
+        status = "okay";
+};
+
+&pruss {
+	pinctrl-names = "default";
+        pinctrl-0 = <&profibus_pins_default>;
+	status = "okay";
+};
+
+/ {
+        pwm7: dmtimer-pwm@7 {
+                compatible = "ti,omap-dmtimer-pwm";
+                ti,timers = <&timer7>;
+                #pwm-cells = <3>;
+        };
+
+        pwm-beeper {
+                compatible = "pwm-beeper";
+                pwms = <&pwm7 0 0 0>;
+        };
+};
+
+/ {
+	vendorinfo { 
+		vendor_name = "GfA Display001";
+		display_dtb = "Display001_4_2020.dtb";
+	};
+};

board/GfA/Display001/Display001_4_nopruss_2020.dts

@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	ti,non-removable;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+		lcd_pins_default: lcd_pins_default {
+			pinctrl-single,pins = <
+				0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
+				0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
+				0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
+				0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
+				0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
+				0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
+				0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
+				0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
+				0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
+				0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
+				0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
+				0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
+				0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
+				0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
+				0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
+				0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
+				0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
+				0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
+				0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
+				0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
+				0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
+				0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
+				0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
+				0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
+				0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+				0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
+				0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
+				0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+			>;
+		};
+
+		lcd_pins_sleep: lcd_pins_sleep {
+			pinctrl-single,pins = <
+				0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data16 */
+				0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data17 */
+				0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data18 */
+				0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data19 */
+				0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data20 */
+				0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data21 */
+				0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data22 */
+				0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data23 */
+				0xa0 (PULL_DISABLE | MUX_MODE7)		/* lcd_data0.lcd_data0 */
+				0xa4 (PULL_DISABLE | MUX_MODE7)		/* lcd_data1.lcd_data1 */
+				0xa8 (PULL_DISABLE | MUX_MODE7)		/* lcd_data2.lcd_data2 */
+				0xac (PULL_DISABLE | MUX_MODE7)		/* lcd_data3.lcd_data3 */
+				0xb0 (PULL_DISABLE | MUX_MODE7)		/* lcd_data4.lcd_data4 */
+				0xb4 (PULL_DISABLE | MUX_MODE7)		/* lcd_data5.lcd_data5 */
+				0xb8 (PULL_DISABLE | MUX_MODE7)		/* lcd_data6.lcd_data6 */
+				0xbc (PULL_DISABLE | MUX_MODE7)		/* lcd_data7.lcd_data7 */
+				0xc0 (PULL_DISABLE | MUX_MODE7)		/* lcd_data8.lcd_data8 */
+				0xc4 (PULL_DISABLE | MUX_MODE7)		/* lcd_data9.lcd_data9 */
+				0xc8 (PULL_DISABLE | MUX_MODE7)		/* lcd_data10.lcd_data10 */
+				0xcc (PULL_DISABLE | MUX_MODE7)		/* lcd_data11.lcd_data11 */
+				0xd0 (PULL_DISABLE | MUX_MODE7)		/* lcd_data12.lcd_data12 */
+				0xd4 (PULL_DISABLE | MUX_MODE7)		/* lcd_data13.lcd_data13 */
+				0xd8 (PULL_DISABLE | MUX_MODE7)		/* lcd_data14.lcd_data14 */
+				0xdc (PULL_DISABLE | MUX_MODE7)		/* lcd_data15.lcd_data15 */
+				0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+				0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
+				0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
+				0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			>;
+		};
+
+
+             /* 	i2c1_pins: pinmux_i2c1_pins { 
+                        pinctrl-single,pins = <
+                                0x158 (PIN_INPUT | MUX_MODE2) */   /* spi0_d1.i2c1_sda */
+                              /*  0x15c (PIN_INPUT | MUX_MODE2) */    /* spi0_cs0.i2c1_scl */
+/*                        >;
+                };
+*/
+              	i2c2_pins: pinmux_i2c2_pins { 
+                        pinctrl-single,pins = <
+                                0x150 (PIN_INPUT_PULLUP | MUX_MODE2)    /* spi0_sclk.i2c2_sda */
+                                0x154 (PIN_INPUT_PULLUP | MUX_MODE2)    /* spi0_d0.i2c2_scl */
+                        >;
+                };
+
+
+               spi1_pins: pinmux_spi1_pins {
+                        pinctrl-single,pins = <
+                                0x190 (PIN_INPUT_PULLUP | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */
+                                0x194 (PIN_INPUT_PULLUP | MUX_MODE3)  /* mcasp0_fsx.spi1_d0 */
+                                0x198 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
+                                0x19c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcasp0_ahclrk.spi1_cs0 */
+                                0x164 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* ecap0_in.pwm0_out */
+                        >;
+                };
+
+
+		edt_ft5x06_pins: pinmux_edt_ft5x06_pins{
+                        pinctrl-single,pins = <
+                                0x1ac (PIN_OUTPUT | MUX_MODE7)    /* mcasp0_ahclkx.gpio3.21 RESET TOUCH P9_25*/
+                                0x8c  (PIN_INPUT | MUX_MODE7)    /* gpmc_clk_mux0.gpio2.1  INT TOUCH P8_18 */
+                        >;
+
+		};
+
+
+               uart4_pins_default: pinmux_uart4_pins_default {
+                        pinctrl-single,pins = <
+                                0x070 (PIN_INPUT_PULLUP | MUX_MODE6)    /* gpmc_wait0.uart4_rxd */
+                                0x074 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ 
+				0x078 (PIN_OUTPUT | MUX_MODE7)		/* gpmc_ben1.gpio1.28 */
+                        >;
+                };
+
+
+                uart4_pins_sleep: pinmux_uart4_pins_sleep {
+                        pinctrl-single,pins = <
+                                0x070 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                                0x074 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x078 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                        >;
+                };
+
+               uart1_pins_default: pinmux_uart1_pins_default {
+                        pinctrl-single,pins = <
+                                0x180 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart1_rxd.uart1_rxd */
+                                0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ 
+				0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda.uart1_ctsn */
+                                0x17c (PIN_OUTPUT | MUX_MODE0)  	/* i2c2_scl.uart1_rtsn */
+                        >;
+                };
+
+
+                uart1_pins_sleep: pinmux_uart1_pins_sleep {
+                        pinctrl-single,pins = <
+                                0x180 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* uart1_rxd.uart1_rxd */
+                                0x184 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */ 
+				0x178 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c2_sda.uart1_ctsn */
+                                0x17c (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* i2c2_scl.uart1_rtsn */
+                        >;
+                };
+
+		timer7_pins: pinmux_timer7_pins {
+                        pinctrl-single,pins = <
+                               0x094 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_oen_ren.timer7 */
+				>;
+				};
+
+		profibus_pins_default: pinmux_profibus_pins_default {
+                        pinctrl-single,pins = < 
+                        0x158 (PIN_INPUT_PULLUP | MUX_MODE4)    /* spi0_d1.uart0_rxd */
+                        0x15c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.uart0_txd */ 
+			0x1a4 (PIN_OUTPUT | MUX_MODE7)		/* mcasp0_fsr.gpio3.19 */
+                	>;
+                };
+};
+
+&timer7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&timer7_pins>; 
+	status = "okay";
+};
+
+&i2c0 {
+	hdmi1: hdmi@70 {
+	      compatible = "nxp,tda998x";
+	      reg = <0x70>;
+	};
+};
+
+
+&i2c2 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&i2c2_pins>;
+    status = "okay";
+    clock-frequency = <350000>;
+};
+
+
+&i2c2 {
+        polytouch: edt-ft5x06@38 {
+                compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+                reg = <0x38>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&edt_ft5x06_pins>;
+                interrupt-parent = <&gpio2>;
+                interrupts = <1 0>;
+                reset-gpios = <&gpio3 21 1>;
+        };
+};
+
+
+&spi1 {
+	pinctrl-names = "default";
+        pinctrl-0 = <&spi1_pins>;
+
+	clock-frequency = <1000000>;
+        status = "okay";
+	spi1_0{
+		compatible = "spidev";
+                reg = <0>;
+		spi-max-frequency = <10000000>;
+        };
+
+	spi1_1{
+		compatible = "spidev";
+                reg = <1>;
+		spi-max-frequency = <10000000>;
+        };
+};
+
+
+&lcdc {
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&lcd_pins_default>;
+        pinctrl-1 = <&lcd_pins_sleep>;
+        status = "okay";
+        display-timings {
+                480x272 {
+                        hactive         = <480>;
+                        vactive         = <272>;
+                        hback-porch     = <2>;
+                        hfront-porch    = <2>;
+                        hsync-len       = <41>;
+                        vback-porch     = <2>;
+                        vfront-porch    = <2>;
+                        vsync-len       = <10>;
+                        clock-frequency = <9000000>;
+                        hsync-active    = <0>;
+                        vsync-active    = <0>;
+                        de-active       = <0>;
+                        pixelclk-active = <0>;
+                };
+        };
+};
+
+/*
+&tscadc {
+        status = "okay";
+        tsc {
+                ti,wires = <4>;
+                ti,x-plate-resistance = <200>;
+                ti,coordinate-readouts = <5>; 
+                ti,wire-config = <0x00 0x11 0x22 0x33>;
+        };
+};
+*/
+
+&tscadc {
+        status = "okay";
+};
+
+&am335x_adc {
+        ti,adc-channels = <0 1 2 3 4 5 6 7>;
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&uart4_pins_default>;
+        pinctrl-1 = <&uart4_pins_sleep>;
+
+        status = "okay";
+
+	rts-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rts-delay = <0 0 100>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+};
+
+&uart1 {
+	pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&uart1_pins_default>;
+        pinctrl-1 = <&uart1_pins_sleep>;
+
+        status = "okay";
+};
+
+&pruss {
+	pinctrl-names = "default";
+        pinctrl-0 = <&profibus_pins_default>;
+	status = "okay";
+};
+
+/ {
+        pwm7: dmtimer-pwm@7 {
+                compatible = "ti,omap-dmtimer-pwm";
+                ti,timers = <&timer7>;
+                #pwm-cells = <3>;
+        };
+
+        pwm-beeper {
+                compatible = "pwm-beeper";
+                pwms = <&pwm7 0 0 0>;
+        };
+};
+
+/ {
+	vendorinfo { 
+		vendor_name = "GfA Display001";
+		display_dtb = "Display001_4_nopruss_2020.dtb";
+	};
+};

board/GfA/Display001/post-build.sh

@@ -6,8 +6,8 @@ echo ">>>$TARGETDIR<<<"
 
 BUILD=`cat ../GfA/board/GfA/Display001/BUILD`
 BUILDDATE=`date +"%Y-%m-%d %H:%M"`
-BUILD=$((BUILD+1))
-echo $BUILD > ../GfA/board/GfA/Display001/BUILD
+#BUILD=$((BUILD+1))
+#echo $BUILD > ../GfA/board/GfA/Display001/BUILD
 
 chmod 600  ../GfA/board/GfA/Display001/rootfs/root/.ssh/id*
 cp -a ../GfA/board/GfA/Display001/rootfs/* $TARGETDIR/
@@ -72,4 +72,4 @@ ln -s libGLESv2.so ./libGLESv2.so.2
 
 cd $WRKDIR
 #------------------------------------
-echo "GfA-Display001 Rel 1.0 Build $BUILD ($BUILDDATE)" > $TARGETDIR/etc/BUILD
+echo "GfA-Display001 Rel 1.0 Build $BUILD-1 ($BUILDDATE)" > $TARGETDIR/etc/BUILD

board/GfA/Display001/post-build_4.4.sh

@@ -6,8 +6,8 @@ echo ">>>$TARGETDIR<<<"
 
 BUILD=`cat ../GfA/board/GfA/Display001/BUILD`
 BUILDDATE=`date +"%Y-%m-%d %H:%M"`
-BUILD=$((BUILD+1))
-echo $BUILD > ../GfA/board/GfA/Display001/BUILD
+#BUILD=$((BUILD+1))
+#echo $BUILD > ../GfA/board/GfA/Display001/BUILD
 
 chmod 600  ../GfA/board/GfA/Display001/rootfs/root/.ssh/id*
 cp -a ../GfA/board/GfA/Display001/rootfs/* $TARGETDIR/
@@ -73,4 +73,4 @@ cp $TARGETDIR/usr/share/fonts/liberation/* $TARGETDIR/usr/lib/fonts
 #
 #cd $WRKDIR
 #------------------------------------
-echo "GfA-Display001 Rel 1.0 Build $BUILD ($BUILDDATE)" > $TARGETDIR/etc/BUILD
+echo "GfA-Display001 Rel 1.0 Build $BUILD-1 ($BUILDDATE)" > $TARGETDIR/etc/BUILD

board/GfA/Display001/rootfs/root/DisplayTo_4_3inch_2020.sh

@@ -0,0 +1,34 @@
+#!/bin/sh
+umount /var/tmp/mnt 2> /dev/null
+rm -rf /var/tmp/mnt 2> /dev/null
+
+from=/var/tmp/mnt/Display001_4_2020.dtb
+to=/var/tmp/mnt/Display001.dtb
+
+such="root=/dev/mmcblk1"
+grep -q $such /proc/cmdline
+if [ $? == 0 ]
+then
+	bootpart="/dev/mmcblk1p1"
+else
+	bootpart="/dev/mmcblk0p1"
+fi  
+
+echo "Bootpart == $bootpart"
+                
+mkdir /var/tmp/mnt
+mount $bootpart /var/tmp/mnt
+
+if [ -e $from ]
+then
+	echo "copy $from --> $to"
+	cp $from $to
+	sync
+	echo "pls. reboot !!"
+else
+	echo " no such file $from"
+fi
+
+umount /var/tmp/mnt 2> /dev/null
+rm -rf /var/tmp/mnt 2> /dev/null
+

board/GfA/Display001/rootfs/root/DisplayTo_4_3inch_nopruss_2020.sh

@@ -0,0 +1,34 @@
+#!/bin/sh
+umount /var/tmp/mnt 2> /dev/null
+rm -rf /var/tmp/mnt 2> /dev/null
+
+from=/var/tmp/mnt/Display001_4_nopruss_2020.dtb
+to=/var/tmp/mnt/Display001.dtb
+
+such="root=/dev/mmcblk1"
+grep -q $such /proc/cmdline
+if [ $? == 0 ]
+then
+	bootpart="/dev/mmcblk1p1"
+else
+	bootpart="/dev/mmcblk0p1"
+fi  
+
+echo "Bootpart == $bootpart"
+                
+mkdir /var/tmp/mnt
+mount $bootpart /var/tmp/mnt
+
+if [ -e $from ]
+then
+	echo "copy $from --> $to"
+	cp $from $to
+	sync
+	echo "pls. reboot !!"
+else
+	echo " no such file $from"
+fi
+
+umount /var/tmp/mnt 2> /dev/null
+rm -rf /var/tmp/mnt 2> /dev/null
+

configs/Display001_3.12.30_defconfig

@@ -38,7 +38,7 @@ BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
-BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="../GfA/board/GfA/Display001/Display001.dts ../GfA/board/GfA/Display001/Display001_4.dts ../GfA/board/GfA/Display001/Display001_7.dts ../GfA/board/GfA/Display001/Display001_10.dts ../GfA/board/GfA/Display001/Display001_rru.dts ../GfA/board/GfA/Display001/Display001_4_nopruss.dts ../GfA/board/GfA/Display001/Display001_7_gain1.dts ../GfA/board/GfA/Display001/Display001_5.dts"
+BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="../GfA/board/GfA/Display001/Display001.dts ../GfA/board/GfA/Display001/Display001_4.dts ../GfA/board/GfA/Display001/Display001_7.dts ../GfA/board/GfA/Display001/Display001_10.dts ../GfA/board/GfA/Display001/Display001_rru.dts ../GfA/board/GfA/Display001/Display001_4_nopruss.dts ../GfA/board/GfA/Display001/Display001_7_gain1.dts ../GfA/board/GfA/Display001/Display001_5.dts ../GfA/board/GfA/Display001/Display001_4_2020.dts ../GfA/board/GfA/Display001/Display001_4_nopruss_2020.dts"
 BR2_PACKAGE_BUSYBOX_CONFIG="../GfA/board/GfA/Display001/busybox.config"
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
 BR2_PACKAGE_FFMPEG_GPL=y
@@ -95,10 +95,6 @@ BR2_PACKAGE_MAKEDEVS=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_DEJAVU=y
 BR2_PACKAGE_FONT_AWESOME=y
-BR2_PACKAGE_DIRECTFB=y
-BR2_PACKAGE_DIRECTFB_DIVINE=y
-BR2_PACKAGE_DIRECTFB_SAWMAN=y
-BR2_PACKAGE_DIRECTFB_DITHER_RGB16=y
 BR2_PACKAGE_EFL=y
 BR2_PACKAGE_EFL_FB=y
 BR2_PACKAGE_FB_TEST_APP=y
@@ -106,7 +102,6 @@ BR2_PACKAGE_FBTERM=y
 BR2_PACKAGE_FBV=y
 BR2_PACKAGE_LINUX_FUSION=y
 BR2_PACKAGE_PSPLASH=y
-BR2_PACKAGE_SDL_DIRECTFB=y
 BR2_PACKAGE_SDL_GFX=y
 BR2_PACKAGE_SDL_IMAGE=y
 BR2_PACKAGE_SDL_IMAGE_GIF=y
@@ -127,7 +122,6 @@ BR2_PACKAGE_SDL_SOUND=y
 BR2_PACKAGE_SDL_SOUND_PLAYSOUND=y
 BR2_PACKAGE_SDL_TTF=y
 BR2_PACKAGE_SDL2=y
-BR2_PACKAGE_SDL2_DIRECTFB=y
 BR2_PACKAGE_SDL2_GFX=y
 BR2_PACKAGE_SDL2_IMAGE=y
 BR2_PACKAGE_SDL2_TTF=y
@@ -238,9 +232,6 @@ BR2_PACKAGE_PYTHON_SQLITE=y
 BR2_PACKAGE_PYTHON_PYEXPAT=y
 BR2_PACKAGE_PYTHON_HASHLIB=y
 BR2_PACKAGE_PYTHON_PYUDEV=y
-BR2_PACKAGE_TCL=y
-BR2_PACKAGE_EXPECT=y
-BR2_PACKAGE_TCLLIB=y
 BR2_PACKAGE_LIBMPD=y
 BR2_PACKAGE_OPUS=y
 BR2_PACKAGE_TAGLIB=y
@@ -276,6 +267,7 @@ BR2_PACKAGE_HARFBUZZ=y
 BR2_PACKAGE_LIBDRM=y
 BR2_PACKAGE_LIBDRM_OMAP=y
 BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
+BR2_PACKAGE_LIBSVG_CAIRO=y
 BR2_PACKAGE_DTC=y
 BR2_PACKAGE_DTC_PROGRAMS=y
 BR2_PACKAGE_LIBGUDEV=y
@@ -285,6 +277,7 @@ BR2_PACKAGE_LIBIIO_BINDINGS_PYTHON=y
 BR2_PACKAGE_LIBINPUT=y
 BR2_PACKAGE_LIBV4L=y
 BR2_PACKAGE_LIBXKBCOMMON=y
+BR2_PACKAGE_TSLIB=y
 BR2_PACKAGE_JSONCPP=y
 BR2_PACKAGE_LIBXSLT=y
 BR2_PACKAGE_LIBMPEG2=y
@@ -337,8 +330,6 @@ BR2_PACKAGE_BOOST_TYPE_ERASURE=y
 BR2_PACKAGE_BOOST_WAVE=y
 BR2_PACKAGE_ELFUTILS=y
 BR2_PACKAGE_LIBCAP_TOOLS=y
-BR2_PACKAGE_PROTOBUF=y
-BR2_PACKAGE_PROTOBUF_C=y
 BR2_PACKAGE_NCURSES_WCHAR=y
 BR2_PACKAGE_NCURSES_TARGET_PANEL=y
 BR2_PACKAGE_NCURSES_TARGET_FORM=y